[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (diogo@diogo-X411UNV) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon May 30 15:29:38 WEST 2022 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29812(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3568344K/4159488K available (15358K kernel code, 2956K rwdata, 6804K rodata, 8640K init, 612K bss, 116008K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009630000 ( 6848 KB) [ 0.000000] .init : 0xffffff8009630000 - 0xffffff8009ea0000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009ea0000 - 0xffffff800a183008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a183008 - 0xffffff800a21c0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001692] Console: colour dummy device 80x25 [ 0.001702] console [tty0] enabled [ 0.001708] bootconsole [uart8250] disabled [ 0.001729] kmemleak: Kernel memory leak detector disabled [ 0.001747] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001760] pid_max: default: 32768 minimum: 301 [ 0.002204] Security Framework initialized [ 0.002426] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002434] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003543] ftrace: allocating 47098 entries in 184 pages [ 0.171047] sched-energy: CPU device node has no sched-energy-costs [ 0.171080] ASID allocator initialised with 65536 entries [ 0.207670] tegra-id: chipid=22117. [ 0.207683] tegra-id: opt_subrevision=0. [ 0.207699] Tegra Speedo/IDDQ fuse revision 4 [ 0.207704] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.207707] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.207713] Tegra: CPU Speedo Value 2073, SoC Speedo Value 1965, GPU Speedo Value 2070 [ 0.207717] Tegra: CPU IDDQ Value 1836, SoC IDDQ Value 2048, GPU IDDQ Value 2440 [ 0.207739] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.207755] DTS File Name: /home/diogo/nvidia/nvidia_sdk/JetPack_4.6.2_Linux_JETSON_NANO_TARGETS/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.207762] DTB Build time: May 30 2022 15:46:16 [ 0.257069] CPU1: Booted secondary processor [411fd071] [ 0.288989] CPU2: Booted secondary processor [411fd071] [ 0.320970] CPU3: Booted secondary processor [411fd071] [ 0.321057] Brought up 4 CPUs [ 0.321063] SMP: Total of 4 processors activated. [ 0.321072] CPU features: detected feature: 32-bit EL0 Support [ 0.321327] CPU: All CPU(s) started at EL2 [ 0.321343] alternatives: patching kernel code [ 0.329399] devtmpfs: initialized [ 0.367147] Initilizing CustomIPI irq domain [ 0.367440] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.367460] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.378034] pinctrl core: initialized pinctrl subsystem [ 0.378601] OS set in device tree is not L4T. [ 0.379017] regulator-dummy: no parameters [ 0.379281] Initializing plugin-manager [ 0.379440] Plugin module not found [ 0.379633] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.380138] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.380560] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.381324] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.381531] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.382130] node /plugin-manager/fragement@13 match with board >=3448-0002-300 [ 0.385592] NET: Registered protocol family 16 [ 0.386910] pstore: using zlib compression [ 0.386949] console [pstore-1] enabled [ 0.386954] pstore: Registered ramoops as persistent store backend [ 0.386960] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.401087] cpuidle: using governor menu [ 0.405134] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.406675] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009ea4000) [ 0.406695] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.409528] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.411793] Serial: AMBA PL011 UART driver [ 0.412310] tegra_powergate_init: DONE [ 0.412325] DTS File Name: /home/diogo/nvidia/nvidia_sdk/JetPack_4.6.2_Linux_JETSON_NANO_TARGETS/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0002-p3449-0000-b00.dts [ 0.412333] DTB Build time: May 30 2022 15:46:16 [ 0.414217] Tegra reboot handler registered. [ 0.418726] iommu: Adding device tegra-carveouts to group 0 [ 0.418854] platform tegra-carveouts: domain=ffffffc0f941f3d8 allocates as[0]=ffffffc0f94280a8 [ 0.419209] iommu: Adding device smmu_test to group 1 [ 0.419257] platform smmu_test: domain=ffffffc0f941f618 allocates as[0]=ffffffc0f9428110 [ 0.420049] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000 [ 0.420109] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000 [ 0.420172] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000 [ 0.420180] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.420202] mc-err: mcerr ops are set to t21x [ 0.430958] iommu: Adding device 70090000.xusb to group 2 [ 0.431235] iommu: Adding device 70006000.serial to group 3 [ 0.431305] platform 70006000.serial: domain=ffffffc0f94b0558 allocates as[0]=ffffffc0f9428178 [ 0.431711] iommu: Adding device 70006040.serial to group 4 [ 0.431980] iommu: Adding device 70006200.serial to group 5 [ 0.432201] iommu: Adding device sound to group 6 [ 0.432253] platform sound: domain=ffffffc0f94b0a98 allocates as[0]=ffffffc0f94281e0 [ 0.432814] iommu: Adding device 7000d400.spi to group 7 [ 0.433100] iommu: Adding device 7000d600.spi to group 8 [ 0.433429] iommu: Adding device 50000000.host1x to group 9 [ 0.433697] iommu: Adding device 54080000.vi to group 10 [ 0.434088] iommu: Adding device 54600000.isp to group 11 [ 0.434345] iommu: Adding device 54680000.isp to group 12 [ 0.434656] iommu: Adding device tegradc.0 to group 13 [ 0.434704] platform tegradc.0: domain=ffffffc0f94bb858 allocates as[0]=ffffffc0f9428248 [ 0.435220] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.435536] iommu: Adding device tegradc.1 to group 14 [ 0.435582] platform tegradc.1: domain=ffffffc0f94bba98 allocates as[0]=ffffffc0f94282b0 [ 0.436091] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.436325] iommu: Adding device 54340000.vic to group 15 [ 0.436527] iommu: Adding device 544c0000.nvenc to group 16 [ 0.436725] iommu: Adding device 54500000.tsec to group 17 [ 0.436940] iommu: Adding device 54100000.tsecb to group 18 [ 0.437303] iommu: Adding device 54480000.nvdec to group 19 [ 0.437522] iommu: Adding device 54380000.nvjpg to group 20 [ 0.438556] iommu: Adding device 546c0000.i2c to group 21 [ 0.438887] iommu: Adding device 57000000.gpu to group 22 [ 0.438940] platform 57000000.gpu: domain=ffffffc0f94c5a98 allocates as[0]=ffffffc0f9428318 [ 0.438981] platform 57000000.gpu: domain=ffffffc0f94c5a98 allocates as[1]=ffffffc0f9428380 [ 0.439016] platform 57000000.gpu: domain=ffffffc0f94c5a98 allocates as[2]=ffffffc0f94283e8 [ 0.439058] platform 57000000.gpu: domain=ffffffc0f94c5a98 allocates as[3]=ffffffc0f9428450 [ 0.439913] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.439923] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.439937] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.439941] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.439946] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.493174] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.493183] tegra-pmc: Clear bootloader IO dpd settings [ 0.493203] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.493261] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.493571] iommu: Adding device 70012000.se to group 23 [ 0.494144] iommu: Adding device 1003000.pcie to group 24 [ 0.494193] platform 1003000.pcie: domain=ffffffc0f955a258 allocates as[0]=ffffffc0f94284b8 [ 0.494606] iommu: Adding device 7000c000.i2c to group 25 [ 0.494910] iommu: Adding device 7000c400.i2c to group 26 [ 0.495168] iommu: Adding device 7000c500.i2c to group 27 [ 0.495422] iommu: Adding device 7000c700.i2c to group 28 [ 0.495676] iommu: Adding device 7000d000.i2c to group 29 [ 0.495924] iommu: Adding device 7000d100.i2c to group 30 [ 0.496195] iommu: Adding device sdhci-tegra.3 to group 31 [ 0.496240] platform sdhci-tegra.3: domain=ffffffc0f955ad98 allocates as[0]=ffffffc0f9428520 [ 0.496668] iommu: Adding device sdhci-tegra.2 to group 32 [ 0.496743] platform sdhci-tegra.2: domain=ffffffc0f9566018 allocates as[0]=ffffffc0f9428588 [ 0.497630] iommu: Adding device 700d0000.xudc to group 33 [ 0.500903] vdd-ac-bat: 5000 mV [ 0.501301] vdd-5v0-sys: 5000 mV [ 0.501953] vdd-5v0-hdmi: 5000 mV [ 0.502384] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.502672] vdd-1v8-sys: 1800 mV [ 0.503081] vdd-fan: 5000 mV [ 0.503299] vdd-fan: supplied by vdd-5v0-sys [ 0.503511] vdd-usb-vbus: 5000 mV [ 0.503736] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.504109] vdd-usb-vbus2: 5000 mV [ 0.538264] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.540561] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.541700] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.541728] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.541749] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.542121] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.550222] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.550581] SCSI subsystem initialized [ 0.550772] libata version 3.00 loaded. [ 0.551054] usbcore: registered new interface driver usbfs [ 0.551102] usbcore: registered new interface driver hub [ 0.551147] usbcore: registered new device driver usb [ 0.555072] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.560381] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.561228] random: fast init done [ 0.561443] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.564235] vdd-ddr-1v1: 1150 mV [ 0.568310] vdd-pre-reg-1v35: 1350 mV [ 0.572236] vdd-1v8: 1800 mV [ 0.576236] avdd-sys-1v2: 1200 mV [ 0.580238] vdd-pex-1v0: 1050 mV [ 0.580868] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.581406] max77620-ldo3: at 3100 mV [ 0.584239] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.584763] max77620-ldo5: at 3100 mV [ 0.588234] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.592241] avdd-1v05-pll: 1050 mV [ 0.596234] avdd-io-hdmi-dp: 1050 mV [ 0.598897] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.599180] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.599468] max77620 4-003c: max77620 probe successful [ 0.602193] media: Linux media interface: v0.10 [ 0.602247] Linux video capture interface: v2.00 [ 0.603218] pps_core: LinuxPPS API ver. 1 registered [ 0.603223] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.603256] PTP clock support registered [ 0.606546] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.607399] Advanced Linux Sound Architecture Driver Initialized. [ 0.608070] Bluetooth: Core ver 2.22 [ 0.608121] NET: Registered protocol family 31 [ 0.608126] Bluetooth: HCI device and connection manager initialized [ 0.608140] Bluetooth: HCI socket layer initialized [ 0.608148] Bluetooth: L2CAP socket layer initialized [ 0.608200] Bluetooth: SCO socket layer initialized [ 0.609944] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.609960] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.610004] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.610018] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.613341] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.614468] vdd-3v3-sys: 3300 mV [ 0.614793] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.614837] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.616312] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.616715] vdd-3v3-sd: 3300 mV [ 0.617132] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.617892] avdd-io-edp-1v05: 1050 mV [ 0.618245] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.618372] vdd-usb-hub-en: 5000 mV [ 0.618716] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.619845] camchar: rtcpu character device driver loaded [ 0.620607] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.621944] clocksource: Switched to clocksource arch_sys_counter [ 0.661886] VFS: Disk quotas dquot_6.6.0 [ 0.662091] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.662580] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.663021] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.663038] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.663252] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.663256] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.663269] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.663304] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.663310] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.663328] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.663337] nvmap_page_pool_init: Total RAM pages: 1010870 [ 0.663342] nvmap_page_pool_init: nvmap page pool size: 126358 pages (493 MB) [ 0.663437] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.663887] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.664633] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.674485] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.674921] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.675304] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.675585] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.675763] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.676031] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.676036] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.676464] NET: Registered protocol family 2 [ 0.676589] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.678809] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.679021] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.679527] TCP: Hash tables configured (established 32768 bind 32768) [ 0.679682] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.679762] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.680183] NET: Registered protocol family 1 [ 0.680897] RPC: Registered named UNIX socket transport module. [ 0.680902] RPC: Registered udp transport module. [ 0.680905] RPC: Registered tcp transport module. [ 0.680909] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.680922] PCI: CLS 0 bytes, default 64 [ 0.681161] Trying to unpack rootfs image as initramfs... [ 0.978959] Freeing initrd memory: 6992K [ 0.988824] host1x 50000000.host1x: initialized [ 0.990749] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.994057] audit: initializing netlink subsys (disabled) [ 0.994129] audit: type=2000 audit(0.847:1): initialized [ 0.994823] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.004617] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.006108] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.006865] 9p: Installing v9fs 9p2000 file system support [ 1.010099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.010214] io scheduler noop registered [ 1.010516] io scheduler cfq registered (default) [ 1.013224] gic 702f9000.agic: GIC IRQ controller registered [ 1.016624] iommu: Adding device 702ef000.adsp to group 34 [ 1.025435] iommu: Adding device aconnect@702c0000:adsp_audio to group 35 [ 1.025587] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.026381] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x8208c10 [ 1.026389] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.028033] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.028139] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.028239] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.028433] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.028521] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.028616] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.028708] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.028793] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.028881] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.028965] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.035153] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.036818] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.038775] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.040056] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.040411] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.041618] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.041841] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.042091] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.042280] Adding domain tsec-pd to PM domain host1x-pd [ 1.045489] tsec 54500000.tsec: initialized [ 1.046935] tsec 54100000.tsecb: initialized [ 1.047681] Adding domain nvdec-pd to PM domain host1x-pd [ 1.051111] nvdec 54480000.nvdec: initialized [ 1.052211] Adding domain vic03-pd to PM domain host1x-pd [ 1.052406] Adding domain msenc-pd to PM domain host1x-pd [ 1.052590] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.056665] falcon 54340000.vic: initialized [ 1.058007] falcon 544c0000.nvenc: initialized [ 1.059384] falcon 54380000.nvjpg: initialized [ 1.063837] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.063890] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.063924] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.064084] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.064171] display board info: id 0x0, fab 0x0 [ 1.064187] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.064193] tegra_cec 70015000.tegra_cec: probed [ 1.064233] generic_infoframe_type: 0x87 [ 1.064367] tegradc tegradc.0: DT parsed successfully [ 1.064420] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0 [ 1.072232] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.072703] tegradc tegradc.0: probed [ 1.073398] Console: switching to colour frame buffer device 80x30 [ 1.073434] tegradc tegradc.0: fb registered [ 1.075015] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.075095] tegradc tegradc.1: No lt-data, using default setting [ 1.075122] tegradc tegradc.1: No hpd-gpio in DT [ 1.075161] tegradc tegradc.1: DT parsed successfully [ 1.075214] tegradc tegradc.1: Display dc.ffffff800ad40000 registered with id=1 [ 1.076736] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.078570] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.079387] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.079393] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.079717] kfuse 7000fc00.kfuse: initialized [ 1.582466] Host read timeout at address 545c00c4 [ 1.582747] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.583625] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.583948] tegradc tegradc.1: probed [ 1.584344] tegradc tegradc.1: fb registered [ 1.584889] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.584898] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.585328] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.586631] vdd-gpu: applied init 1000000uV constraint [ 1.586638] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.587042] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.587550] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.587557] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.587567] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.587583] tegradc tegradc.1: blank - powerdown [ 1.587604] extcon-disp-state extcon:disp-state: cable 44 state 0 already set. [ 1.587610] Extcon DP: HPD disabled [ 1.587615] hpd: hpd_switch 0 [ 1.587620] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.587628] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.587636] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.590625] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.590724] No Device Node present for smmu client: serial8250 !! [ 1.590734] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.590787] iommu: Adding device serial8250 to group 36 [ 1.593102] console [ttyS0] disabled [ 1.593204] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.603475] console [ttyS0] enabled [ 1.604490] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.604784] serial-tegra 70006200.serial: RX in PIO mode [ 1.604880] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.605891] [drm] Initialized [ 1.616290] brd: module loaded [ 1.622029] loop: module loaded [ 1.622173] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.622351] tegra_profiler: auth: init [ 1.623897] THERMAL EST: found 2 subdevs [ 1.623907] THERMAL EST num_resources: 0 [ 1.623915] [THERMAL EST subdev 0] [ 1.623923] [THERMAL EST subdev 1] [ 1.624508] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.624512] THERMAL EST: thz register success. [ 1.624696] THERMAL EST: end of probe, return err: 0 [ 1.625898] sd: No Scsi addr parsed to reserve index [ 1.625984] hisi_sas: driver version v1.6 [ 1.632682] libphy: Fixed MDIO Bus: probed [ 1.633394] tun: Universal TUN/TAP device driver, 1.6 [ 1.633398] tun: (C) 1999-2004 Max Krasnyansky [ 1.634607] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.634615] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.634673] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.634677] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.634741] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.634744] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.634795] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.634798] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.635966] PPP generic driver version 2.4.2 [ 1.636176] PPP BSD Compression module registered [ 1.636182] PPP Deflate Compression module registered [ 1.636225] PPP MPPE Compression module registered [ 1.636233] NET: Registered protocol family 24 [ 1.636310] usbcore: registered new interface driver r8152 [ 1.636355] usbcore: registered new interface driver asix [ 1.636398] usbcore: registered new interface driver ax88179_178a [ 1.636436] usbcore: registered new interface driver cdc_ether [ 1.636476] usbcore: registered new interface driver net1080 [ 1.636508] usbcore: registered new interface driver cdc_subset [ 1.636540] usbcore: registered new interface driver zaurus [ 1.636599] usbcore: registered new interface driver cdc_ncm [ 1.636767] VFIO - User Level meta-driver version: 0.3 [ 1.638071] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.638094] ehci-pci: EHCI PCI platform driver [ 1.638139] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.638152] ohci-pci: OHCI PCI platform driver [ 1.638199] ohci-platform: OHCI generic platform driver [ 1.641023] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.641647] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.642873] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f97ba800 id [ 1.645355] usbcore: registered new interface driver uas [ 1.645423] usbcore: registered new interface driver usb-storage [ 1.645539] usbcore: registered new interface driver usbserial [ 1.645792] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12 UTC, Version: 50.26 release [ 1.645847] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.645874] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.646886] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.646953] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.647188] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.647196] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.647201] usb usb1: Product: xHCI Host Controller [ 1.647207] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.647211] usb usb1: SerialNumber: 70090000.xusb [ 1.647897] hub 1-0:1.0: USB hub found [ 1.647940] hub 1-0:1.0: 5 ports detected [ 1.648593] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.648606] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.648768] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.648871] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.648877] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.648883] usb usb2: Product: xHCI Host Controller [ 1.648888] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.648893] usb usb2: SerialNumber: 70090000.xusb [ 1.649427] hub 2-0:1.0: USB hub found [ 1.649466] hub 2-0:1.0: 4 ports detected [ 1.650298] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.650305] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.651945] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.653577] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.653592] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.653630] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.653893] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.655029] mousedev: PS/2 mouse device common for all mice [ 1.655146] usbcore: registered new interface driver xpad [ 1.750105] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 1.750409] usb usb2: usb_suspend_both: status 0 [ 1.783166] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.785715] rtc rtc1: alarm rtc device [ 1.785735] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.785767] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.786432] i2c /dev entries driver [ 1.788804] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.789310] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.789318] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.790305] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.813650] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.813745] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.821380] imx219 7-0010: board setup failed [ 1.825834] imx219: probe of 7-0010 failed with error -121 [ 1.826435] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.849717] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.849806] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.857384] imx219 8-0010: board setup failed [ 1.861816] imx219: probe of 8-0010 failed with error -121 [ 1.863377] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.866078] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.866085] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.866549] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.866567] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.866578] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.866716] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.866727] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.866735] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.866883] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.866895] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.866901] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.867077] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.867920] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.867982] tegra_aotag tegra-aotag: Invalid temp readout [ 1.868039] tegra_aotag tegra-aotag: Invalid temp readout [ 1.868058] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.868068] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.869007] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.869028] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.869233] tegra_aotag tegra-aotag: Invalid temp readout [ 1.869264] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.869690] parse_throttle_dt_data: Num cap clks = 6 [ 1.869696] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.869710] parse_throttle_dt_data: clk=gpu type=4 [ 1.869738] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.869761] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.869787] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.869791] parse_throttle_dt_data: clk=emc type=3 [ 1.870259] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.870373] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.870518] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.871300] FAN dev name: pwm-fan [ 1.871382] FAN:gpio request success. [ 1.871396] FAN: can't find tach_gpio [ 1.871430] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.871745] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.871752] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.871857] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.871862] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.871868] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.871872] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.871877] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.871882] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.871887] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.871892] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.871897] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.871902] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.874734] device-mapper: uevent: version 1.0.3 [ 1.875192] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.880668] tegra210-cpufreq cpufreq: probe()...completed [ 1.881380] sdhci: Secure Digital Host Controller Interface driver [ 1.881382] sdhci: Copyright(c) Pierre Ossman [ 1.881384] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.881753] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.883232] sdhci-tegra sdhci-tegra.2: Got CD GPIO [ 1.883580] sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful [ 1.885947] tegra-se 70012000.se: tegra_se_probe: complete [ 1.886476] hidraw: raw HID events driver (C) Jiri Kosina [ 1.887525] usbcore: registered new interface driver usbhid [ 1.887527] usbhid: USB HID core driver [ 1.890411] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.890787] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.892848] nvpmodel: initialized successfully [ 1.893839] usbcore: registered new interface driver snd-usb-audio [ 1.893893] No Device Node present for smmu client: snd-soc-dummy !! [ 1.893899] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.893921] iommu: Adding device snd-soc-dummy to group 37 [ 1.900064] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.917007] OPE platform probe [ 1.917094] OPE platform probe successful [ 1.917350] OPE platform probe [ 1.917433] OPE platform probe successful [ 1.929959] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.938164] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr [ 1.942138] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.942278] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.942408] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.942537] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.942661] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.942795] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.942921] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.943048] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.943175] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.943301] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.955442] u32 classifier [ 1.955445] Actions configured [ 1.955516] Initializing XFRM netlink socket [ 1.956219] NET: Registered protocol family 10 [ 1.956968] NET: Registered protocol family 17 [ 1.956980] NET: Registered protocol family 15 [ 1.957053] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.957160] Bluetooth: RFCOMM socket layer initialized [ 1.957170] Bluetooth: RFCOMM ver 1.11 [ 1.957175] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.957180] Bluetooth: HIDP socket layer initialized [ 1.957198] 9pnet: Installing 9P2000 support [ 1.957236] Key type dns_resolver registered [ 1.957657] Registered cp15_barrier emulation handler [ 1.957671] Registered setend emulation handler [ 1.959105] registered taskstats version 1 [ 1.959631] Adding domain ve2-pd to PM domain host1x-pd [ 1.959884] Adding domain ve-pd to PM domain host1x-pd [ 1.961894] isp 54600000.isp: initialized [ 1.962904] isp 54680000.isp: initialized [ 1.974162] last reset is due to power on reset [ 1.974166] KERNEL: PMC reset status reg: 0x0 [ 1.974225] BL: PMC reset status reg: 0x0 [ 1.974227] BL: PMIC poweroff Event Recorder: 0x40 [ 1.975660] clk_cbus_recalc_rate: no gbus parent [ 1.975666] clk_cbus_round_rate: no gbus parent [ 1.975668] clk_cbus_round_rate: no gbus parent [ 1.975675] clk_cbus_recalc_rate: no gbus parent [ 1.975778] clk_cbus_recalc_rate: no gbus parent [ 1.975782] clk_cbus_round_rate: no gbus parent [ 1.975784] clk_cbus_round_rate: no gbus parent [ 1.975788] clk_cbus_recalc_rate: no gbus parent [ 1.976464] tegra_dvfs: GPU-cap: registered [ 1.976516] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.976518] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.976520] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled [ 1.977887] tegra_dvfs: vdd-gpu-vts: registered [ 1.977957] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 1.978604] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.979351] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.979844] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.982398] usb 1-3: Device not responding to setup address. [ 1.982558] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.984406] tegra-pcie 1003000.pcie: link 0 down, retrying [ 1.986871] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.991006] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 1.991101] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 1.991192] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.993780] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 2.010691] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:10 UTC (946688410) [ 2.011726] vi 54080000.vi: vi_probe: ++ [ 2.014480] vi 54080000.vi: initialized [ 2.016544] vi 54080000.vi: subdev nvcsi--2 bound [ 2.016649] vi 54080000.vi: subdev nvcsi--1 bound [ 2.016876] mmcblk mmc0:0001: Card claimed for testing. [ 2.018196] Disable partitions left on by BL [ 2.018199] disb [ 2.018247] bwmgr: missing cdev-type property [ 2.018341] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.018348] DRAM derating cdev registered. [ 2.019241] ALSA device list: [ 2.019244] #0: tegra-hda at 0x70038000 irq 82 [ 2.019247] #1: tegra-snd-t210ref-mobile-rt565x [ 2.022557] Freeing unused kernel memory: 8640K [ 2.046606] Root device found: mmcblk0p1 [ 2.048021] Found dev node: /dev/mmcblk0p1 [ 2.065991] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 2.065996] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.113414] EXT4-fs (mmcblk0p1): 28 orphan inodes deleted [ 2.113417] EXT4-fs (mmcblk0p1): recovery complete [ 2.135032] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.136913] Rootfs mounted over mmcblk0p1 [ 2.150991] Switching from initrd to actual rootfs [ 2.190245] usb 1-3: Device not responding to setup address. [ 2.236804] systemd[1]: System time before build time, advancing clock. [ 2.255622] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.267090] cgroup: cgroup2: unknown option "nsdelegate" [ 2.281108] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.281875] systemd[1]: Detected architecture arm64. [ 2.306109] systemd[1]: Set hostname to . [ 2.386449] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.386458] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.391965] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.397965] usb 1-3: device not accepting address 2, error -71 [ 2.490829] random: systemd: uninitialized urandom read (16 bytes read) [ 2.490860] systemd[1]: Reached target User and Group Name Lookups. [ 2.491059] random: systemd: uninitialized urandom read (16 bytes read) [ 2.491080] systemd[1]: Reached target Swap. [ 2.491130] random: systemd: uninitialized urandom read (16 bytes read) [ 2.492805] systemd[1]: Created slice System Slice. [ 2.493112] systemd[1]: Listening on Journal Socket. [ 2.495292] systemd[1]: Mounting RPC Pipe File System... [ 2.521979] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 2.522273] usb 1-3: Device not responding to setup address. [ 2.552980] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.612033] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 2.720339] systemd-journald[1991]: Received request to flush runtime journal from PID 1 [ 2.730222] usb 1-3: Device not responding to setup address. [ 2.738043] FAN rising trip_level:1 cur_temp:51250 trip_temps[2]:61000 [ 2.809971] tegra-pcie 1003000.pcie: link 0 down, retrying [ 2.812031] tegra-pcie 1003000.pcie: link 0 down, ignoring [ 2.917354] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.917362] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.917366] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.917370] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.917375] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.917397] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 2.917471] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.917625] iommu: Adding device 0000:00:02.0 to group 38 [ 2.917713] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.917843] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.917867] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.917897] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 2.917917] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.918081] pci 0000:01:00.0: supports D1 D2 [ 2.918085] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.918258] iommu: Adding device 0000:01:00.0 to group 39 [ 2.934024] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.934060] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.934065] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.934072] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.934090] pci 0000:01:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 2.934107] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.934115] pci 0000:00:02.0: PCI bridge to [bus 01] [ 2.934119] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.934126] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.934405] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.934410] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.934415] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.934510] aer 0000:00:02.0:pcie002: service driver aer loaded [ 2.934690] r8168 0000:01:00.0: enabling device (0000 -> 0003) [ 2.934708] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.942395] usb 1-3: device not accepting address 3, error -71 [ 2.948378] usb usb1-port3: attempt power cycle [ 2.962556] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.962626] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 48:b0:2d:2f:b5:ed from device tree [ 2.963114] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.963130] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 3.262230] using random self ethernet address [ 3.266709] using random host ethernet address [ 3.790204] random: crng init done [ 3.793609] random: 7 urandom warning(s) missed due to ratelimiting [ 4.044483] Mass Storage Function, version: 2009/09/11 [ 4.044489] LUN: removable file: (no medium) [ 4.051980] using random self ethernet address [ 4.057311] using random host ethernet address [ 4.075126] rndis0: HOST MAC a6:ed:0a:42:c6:10 [ 4.077447] rndis0: MAC a6:ed:0a:42:c6:11 [ 4.079728] usb0: HOST MAC a6:ed:0a:42:c6:12 [ 4.079758] usb0: MAC a6:ed:0a:42:c6:13 [ 4.079777] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.080372] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.080390] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 4.080422] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.080652] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.080676] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.081193] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.081205] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.081428] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.089713] l4tbr0: port 1(rndis0) entered blocking state [ 4.089718] l4tbr0: port 1(rndis0) entered disabled state [ 4.089889] device rndis0 entered promiscuous mode [ 4.109856] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 4.115412] l4tbr0: port 2(usb0) entered blocking state [ 4.115417] l4tbr0: port 2(usb0) entered disabled state [ 4.117217] device usb0 entered promiscuous mode [ 4.127205] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 4.421979] usb 1-3: new high-speed USB device number 4 using tegra-xusb [ 4.453471] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.453493] cpu-throttle-alert cooling device registered. [ 4.467668] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.467688] gpu-throttle-alert cooling device registered. [ 4.468474] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.468489] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.468502] hot-surface-alert cooling device registered. [ 4.542102] usb 1-3: device descriptor read/64, error -71 [ 4.629824] zram: Added device: zram0 [ 4.632868] zram: Added device: zram1 [ 4.634395] zram: Added device: zram2 [ 4.635943] zram: Added device: zram3 [ 4.681852] zram0: detected capacity change from 0 to 519569408 [ 4.712419] Adding 507388k swap on /dev/zram0. Priority:5 extents:1 across:507388k SS [ 4.721037] zram1: detected capacity change from 0 to 519569408 [ 4.748627] Adding 507388k swap on /dev/zram1. Priority:5 extents:1 across:507388k SS [ 4.752958] zram2: detected capacity change from 0 to 519569408 [ 4.769384] Adding 507388k swap on /dev/zram2. Priority:5 extents:1 across:507388k SS [ 4.774129] usb 1-3: device descriptor read/64, error -71 [ 4.781658] zram3: detected capacity change from 0 to 519569408 [ 4.819900] Adding 507388k swap on /dev/zram3. Priority:5 extents:1 across:507388k SS [ 5.005982] usb 1-3: new high-speed USB device number 5 using tegra-xusb [ 5.126131] usb 1-3: device descriptor read/64, error -71 [ 5.358144] usb 1-3: device descriptor read/64, error -71 [ 5.470036] usb usb1-port3: unable to enumerate USB device [ 5.475729] usb usb1: usb_suspend_both: status 0 [ 5.475739] tegra-xusb 70090000.xusb: entering ELPG [ 5.476752] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 0 [ 5.476944] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0 [ 5.478509] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 2 [ 5.478574] tegra-xusb 70090000.xusb: entering ELPG done [ 5.820349] Bridge firewalling registered [ 5.862132] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.918490] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.929709] eth0: 0xffffff800ab9a000, 48:b0:2d:2f:b5:ed, IRQ 407 [ 5.998862] tegradc tegradc.0: blank - powerdown [ 5.998872] tegradc tegradc.1: blank - powerdown [ 6.068746] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.376727] Netfilter messages via NETLINK v0.30. [ 6.386785] ctnetlink v0.93: registering with nfnetlink. [ 6.729272] fuse init (API version 7.26) [ 6.759794] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 9.138458] r8168: eth0: link up [ 9.138509] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.908651] vdd-usb-vbus: disabling [ 33.908697] vdd-usb-vbus2: disabling [ 33.908782] vddio-sdmmc-ap: disabling [ 33.909506] vdd-3v3-sd: disabling [ 33.909540] avdd-io-edp-1v05: disabling [ 33.909572] vdd-usb-hub-en: disabling [ 46.398320] mmc1: Data end bit error [ 46.402006] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 46.407909] sdhci: Sys addr: 0x00000000 | Version: 0x00000303 [ 46.413799] sdhci: Blk size: 0x00007008 | Blk cnt: 0x00000000 [ 46.419680] sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 46.425562] sdhci: Present: 0x01eb0000 | Host ctl: 0x00000011 [ 46.431444] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 46.437325] sdhci: Wake-up: 0x00000000 | Clock: 0x00000407 [ 46.443203] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 46.449086] sdhci: Int enab: 0x02ff100b | Sig enab: 0x02fc100b [ 46.454967] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 46.460850] sdhci: Caps: 0x376cd08c | Caps_1: 0x10006f77 [ 46.466729] sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 [ 46.472604] sdhci: Host ctl2: 0x00003008 [ 46.476580] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 46.483225] sdhci: =========================================== [ 46.491868] mmc1: error -84 whilst initialising SD card [ 46.588076] mmc1: Data end bit error [ 46.591732] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 46.597632] sdhci: Sys addr: 0x00000000 | Version: 0x00000303 [ 46.603519] sdhci: Blk size: 0x00007008 | Blk cnt: 0x00000000 [ 46.609402] sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 46.615284] sdhci: Present: 0x01eb0000 | Host ctl: 0x00000011 [ 46.621162] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 46.627043] sdhci: Wake-up: 0x00000000 | Clock: 0x00000607 [ 46.632918] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 46.638796] sdhci: Int enab: 0x02ff100b | Sig enab: 0x02fc100b [ 46.644673] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 46.650556] sdhci: Caps: 0x376cd08c | Caps_1: 0x10006f77 [ 46.656436] sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 [ 46.662312] sdhci: Host ctl2: 0x00003008 [ 46.666288] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 46.672935] sdhci: =========================================== [ 46.680964] mmc1: error -84 whilst initialising SD card [ 46.776629] mmc1: Data end bit error [ 46.780283] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 46.786184] sdhci: Sys addr: 0x00000000 | Version: 0x00000303 [ 46.792071] sdhci: Blk size: 0x00007008 | Blk cnt: 0x00000000 [ 46.797955] sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 46.803840] sdhci: Present: 0x01eb0000 | Host ctl: 0x00000011 [ 46.809722] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 46.815603] sdhci: Wake-up: 0x00000000 | Clock: 0x00000807 [ 46.821481] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 46.827362] sdhci: Int enab: 0x02ff100b | Sig enab: 0x02fc100b [ 46.833244] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 46.839124] sdhci: Caps: 0x376cd08c | Caps_1: 0x10006f77 [ 46.845003] sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 [ 46.850875] sdhci: Host ctl2: 0x00003008 [ 46.854854] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 46.861499] sdhci: =========================================== [ 46.868751] mmc1: error -84 whilst initialising SD card [ 46.973041] mmc1: Data end bit error [ 46.976648] sdhci: =========== REGISTER DUMP (mmc1)=========== [ 46.982503] sdhci: Sys addr: 0x00000000 | Version: 0x00000303 [ 46.988355] sdhci: Blk size: 0x00007008 | Blk cnt: 0x00000000 [ 46.994203] sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 [ 47.000053] sdhci: Present: 0x01eb0000 | Host ctl: 0x00000011 [ 47.005899] sdhci: Power: 0x00000001 | Blk gap: 0x00000000 [ 47.011747] sdhci: Wake-up: 0x00000000 | Clock: 0x00001007 [ 47.017595] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000 [ 47.023443] sdhci: Int enab: 0x02ff100b | Sig enab: 0x02fc100b [ 47.029291] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 47.035138] sdhci: Caps: 0x376cd08c | Caps_1: 0x10006f77 [ 47.040984] sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 [ 47.046827] sdhci: Host ctl2: 0x00003008 [ 47.050770] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000ffefe410 [ 47.057371] sdhci: =========================================== [ 47.064055] mmc1: error -84 whilst initialising SD card