[0000.726] I> Task: Prod config init (0x50013631) [0000.731] I> Task: Pad voltage init (0x500132a5) [0000.735] I> Task: Prod init (0x500136d5) [0000.739] I> Task: Common rail init (0x50013bd1) [0000.744] W> Thermal config not found in BCT [0000.748] W> Generic i2c config not found in BCT [0000.753] W> Platform rail config not found in BCT [0000.758] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.767] W> MEMIO rail config not found in BCT [0000.771] I> Task: Mem clock src (0x500119c5) [0000.775] I> Task: Misc. board config (0x50013c29) [0000.780] W> Platform config not found in BCT [0000.784] I> Task: SDRAM init (0x500119c9) [0000.791] I> SDRAM-params @ 0xd485000 [0000.794] I> MSS code-drop: NvBootSdramInit [0000.798] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 8 [0000.806] I> MSS CAR: Init PLLM [0000.809] I> MSS CAR: Init PLLHUB [0000.814] I> Encryption: MTS: en, TX: dis, VPR: dis, GSC: en [0000.825] I> mb1_sdram_init Done ! [0000.829] I> SDRAM Size in Total 0x800000000 [0000.833] I> Task: Dram Ecc scrub (0x50011261) [0000.837] I> Task: DRAM alias check (0x50011b71) [0000.868] I> Task: Program NSDRAM carveout (0x50014921) [0000.875] I> NSDRAM carveout encryption is disabled [0000.880] I> Program NSDRAM carveout [0000.884] I> Task: Register checker (0x50011b75) [0000.892] I> Task: Enable clock-mon (0x5001ed25) [0000.909] I> FMON: Fmon re-programming done [0000.914] I> Task: Mapper init (0x5001d451) [0000.919] I> Task: SC7 Context Init (0x5001f02d) [0000.925] I> Task: CCPLEX IST init (0x5000d335) [0000.931] I> Task: CPU WP0 (0x5000c635) [0000.936] I> Loading MCE [0000.939] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.945] I> Slot: 0 [0000.947] I> Binary[8] block-0 (partition size: 0x80000) [0000.953] I> get_binary_info: Binary name: MCE [0000.958] I> Size of crypto header is 8192 [0000.962] I> BCH load address is : 0x4003e000 [0000.968] I> Size of crypto header is 8192 [0000.973] I> BCH of MCE read from storage [0000.977] I> BCH address is : 0x4003e000 [0000.982] I> MCE header integrity check is success [0000.987] I> Binary magic in BCH component 0 is MTSM [0000.993] I> component binary type is 8 [0000.997] I> Size of crypto header is 8192 [0001.003] I> MCE binary is read from storage [0001.008] I> MCE binary integrity check is success [0001.014] I> Binary MCE loaded successfully at 0x40000000 (0x2c080) [0001.021] I> Size of crypto header is 8192 [0001.035] I> Size of crypto header is 8192 [0001.040] I> Sending WP0 mailbox command to PSC [0001.051] I> Task: MB1 fixed firewalls (0x5001e55d) [0001.070] I> Task: Load bpmp-fw (0x5001e801) [0001.076] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.082] I> Slot: 0 [0001.084] I> Binary[15] block-0 (partition size: 0x180000) [0001.090] I> get_binary_info: Binary name: BPMP_FW [0001.096] I> Size of crypto header is 8192 [0001.100] I> BCH load address is : 0x807fe000 [0001.106] I> Size of crypto header is 8192 [0001.110] I> BCH of BPMP_FW read from storage [0001.115] I> BCH address is : 0x807fe000 [0001.121] I> BPMP_FW header integrity check is success [0001.126] I> Binary magic in BCH component 0 is BPMF [0001.131] I> component binary type is 15 [0001.135] I> Size of crypto header is 8192 [0001.151] I> BPMP_FW binary is read from storage [0001.158] I> BPMP_FW binary integrity check is success [0001.163] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfb3c0) [0001.172] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.177] I> Slot: 0 [0001.180] I> Binary[16] block-10000 (partition size: 0x400000) [0001.187] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.192] I> Size of crypto header is 8192 [0001.197] I> BCH load address is : 0x807fc000 [0001.202] I> Size of crypto header is 8192 [0001.207] I> BCH of BPMP_FW_DTB read from storage [0001.212] I> BCH address is : 0x807fc000 [0001.218] I> BPMP_FW_DTB header integrity check is success [0001.223] I> Binary magic in BCH component 0 is BPMD [0001.229] I> component binary type is 16 [0001.233] I> Size of crypto header is 8192 [0001.239] I> BPMP_FW_DTB binary is read from storage [0001.245] I> BPMP_FW_DTB binary integrity check is success [0001.251] I> Binary BPMP_FW_DTB loaded successfully at 0x807db9f0 (0x20440) [0001.260] I> Task: Load psc-fw (0x5001ea0d) [0001.265] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.271] I> Slot: 0 [0001.274] I> Binary[17] block-0 (partition size: 0xc0000) [0001.280] I> get_binary_info: Binary name: PSC_FW [0001.285] I> Size of crypto header is 8192 [0001.289] I> BCH load address is : 0x80ffe000 [0001.295] I> Size of crypto header is 8192 [0001.300] I> BCH of PSC_FW read from storage [0001.304] I> BCH address is : 0x80ffe000 [0001.310] I> PSC_FW header integrity check is success [0001.315] I> Binary magic in BCH component 0 is PFWP [0001.320] I> component binary type is 17 [0001.325] I> Size of crypto header is 8192 [0001.335] I> PSC_FW binary is read from storage [0001.341] I> PSC_FW binary integrity check is success [0001.346] I> Binary PSC_FW loaded successfully at 0x80000000 (0x7d000) [0001.355] I> Task: Load nvdec-fw (0x5001ea81) [0001.360] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.366] I> Slot: 0 [0001.368] I> Binary[7] block-0 (partition size: 0x100000) [0001.375] I> get_binary_info: Binary name: NVDEC [0001.380] I> Size of crypto header is 8192 [0001.384] I> BCH load address is : 0x800fe000 [0001.390] I> Size of crypto header is 8192 [0001.394] I> BCH of NVDEC read from storage [0001.399] I> BCH address is : 0x800fe000 [0001.404] I> NVDEC header integrity check is success [0001.410] I> Binary magic in BCH component 0 is NDEC [0001.415] I> component binary type is 7 [0001.419] I> Size of crypto header is 8192 [0001.426] I> NVDEC binary is read from storage [0001.432] I> NVDEC binary integrity check is success [0001.437] I> Binary NVDEC loaded successfully at 0x80000000 (0x35000) [0001.447] I> Task: Load tsec-fw (0x5001ec6d) [0001.453] I> TSEC-FW load support not enabled [0001.457] I> Task: Program misc carveouts (0x5001445d) [0001.464] I> Program IPC carveouts [0001.471] I> Task: GPIO interrupt map (0x50013cc5) [0001.477] I> Task: SC7 context save (0x5001f161) [0001.483] I> NV_SC7 Context addr: 0xa0000000 [0001.488] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.494] I> Slot: 0 [0001.496] I> Binary[27] block-0 (partition size: 0x100000) [0001.503] I> get_binary_info: Binary name: BR_BCT [0001.508] I> Size of crypto header is 8192 [0001.512] I> Size of crypto header is 8192 [0001.517] I> BR_BCT binary is read from storage [0001.523] I> BR_BCT binary integrity check is success [0001.528] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.536] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.542] I> Slot: 0 [0001.544] I> Binary[13] block-0 (partition size: 0x30000) [0001.550] I> get_binary_info: Binary name: SC7-FW [0001.555] I> Size of crypto header is 8192 [0001.560] I> Size of crypto header is 8192 [0001.564] I> BCH load address is : 0xa0002000 [0001.570] I> Size of crypto header is 8192 [0001.575] I> BCH of SC7-FW read from storage [0001.579] I> BCH address is : 0xa0002000 [0001.585] I> SC7-FW header integrity check is success [0001.590] I> Binary magic in BCH component 0 is WB0B [0001.595] I> component binary type is 13 [0001.599] I> Size of crypto header is 8192 [0001.606] I> SC7-FW binary is read from storage [0001.611] I> SC7-FW binary integrity check is success [0001.617] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x25460) [0001.625] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.631] I> Slot: 0 [0001.633] I> Binary[22] block-0 (partition size: 0x30000) [0001.639] I> get_binary_info: Binary name: PSC_RF [0001.644] I> Size of crypto header is 8192 [0001.649] I> Size of crypto header is 8192 [0001.653] I> BCH load address is : 0xa0029460 [0001.659] I> Size of crypto header is 8192 [0001.664] I> BCH of PSC_RF read from storage [0001.668] I> BCH address is : 0xa0029460 [0001.674] I> PSC_RF header integrity check is success [0001.679] I> Binary magic in BCH component 0 is PSCR [0001.685] I> component binary type is 22 [0001.689] I> Size of crypto header is 8192 [0001.695] I> PSC_RF binary is read from storage [0001.700] I> PSC_RF binary integrity check is success [0001.706] I> Binary PSC_RF loaded successfully at 0xa002b460 (0x1bd20) [0001.725] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.731] I> Slot: 0 [0001.734] I> Binary[14] block-0 (partition size: 0x20000) [0001.740] I> get_binary_info: Binary name: MB2_RF [0001.745] I> Size of crypto header is 8192 [0001.749] I> Size of crypto header is 8192 [0001.754] I> BCH load address is : 0xa008e240 [0001.759] I> Size of crypto header is 8192 [0001.764] I> BCH of MB2_RF read from storage [0001.769] I> BCH address is : 0xa008e240 [0001.774] I> MB2_RF header integrity check is success [0001.780] I> Binary magic in BCH component 0 is MB2R [0001.785] I> component binary type is 14 [0001.789] I> Size of crypto header is 8192 [0001.795] I> MB2_RF binary is read from storage [0001.801] I> MB2_RF binary integrity check is success [0001.806] I> Binary MB2_RF loaded successfully at 0xa0090240 (0x1bdc0) [0001.815] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.823] I> SC7 context fuse-bypass data is empty [0001.830] I> SC7 context save done [0001.834] I> Task: Load MB2/Applet/FSKP (0x5000d451) [0001.841] I> Loading MB2 [0001.844] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.849] I> Slot: 0 [0001.852] I> Binary[6] block-0 (partition size: 0x80000) [0001.858] I> get_binary_info: Binary name: MB2 [0001.863] I> Size of crypto header is 8192 [0001.867] I> BCH load address is : 0x8007e000 [0001.873] I> Size of crypto header is 8192 [0001.878] I> BCH of MB2 read from storage [0001.882] I> BCH address is : 0x8007e000 [0001.887] I> MB2 header integrity check is success [0001.892] I> Binary magic in BCH component 0 is MB2B [0001.898] I> component binary type is 6 [0001.902] I> Size of crypto header is 8192 [0001.911] I> MB2 binary is read from storage [0001.917] I> MB2 binary integrity check is success [0001.922] I> Binary MB2 loaded successfully at 0x80000000 (0x686c0) [0001.930] I> Task: Map CCPLEX SHARED carveout (0x5000d521) [0001.937] I> Task: Prepare MB2 params (0x5000d5dd) [0001.946] I> MB2-params @ 0x40060000 [0001.953] I> BR-BCT Boot Chain Fields [0001.957] I> u32_non_gpio_select_boot_chain : 0 [0001.962] I> u32_num_boot_chains : 2 [0001.967] I> bf_bl_gpio_select_boot_chain_1b : 0 [0001.974] I> Task: Dram ecc test (0x500112cd) [0001.979] I> Task: Misc NV security settings (0x5000ced5) [0001.986] I> NVDEC sticky bits programming done [0001.991] I> Task: Disable/Reload WDT (0x5001f991) [0001.996] I> Programmed SLCG global override := 0x0 [0002.002] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-e33bc3dc) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001f246e I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x82d000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e6c) I> Task: Enable hot-plug capability (0x50020e7c) I> Task: PSC mailbox init (0x50011ed0) I> Task: Crypto init (0x5000513c) I> Task: Enable GP-SE clock (0x50001fd0) I> Task: I2C register (0x50001e30) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e18) I> Task: Boot device init (0x50001d60) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d5c) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x50017428) I> Task: Load AUXP FWs (0x50020a1c) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x82be00000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x82bb00000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x838000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9476672 bytes I> dce: plain binary integrity check is success I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x838000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x82cc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x82bf00000 I> Task: Carveout setup (0x50019c94) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50011da4) I> Task: Enable FSI VMON (0x50011944) I> FSI VMON: FSI Vmon re-calibration and fine tuning done I> Task: Validate FSI Therm readings (0x5001199c) I> FSITHERM max temp = 51 I> FSITHERM min temp = 48 I> Task: Restore XUSB sec (0x50001d30) I> Task: Enable FSI SE clock (0x5001232c) I> Enable FSI-SE clock and 10ms delay... I> Task: Initialize SBSA UART CAR (0x50001f34) I> Task: Initialize CPUBL Params (0x50013384) I> CPUBL-params @ 0x834000000 I> Task: Prepare eeprom data (0x50013140) I> Task: OEM firewalls (0x5001df14) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> OEM firewalls configured I> Task: Unhalt AUXPs (0x50020c84) I> Unhalting SPE.. I> Enabling combined UART ▒▒▒▒spe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 2e3d77fae66a40ac8e7a91531ae7d9b3 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler ▒▒ I> Task: Trigger mailbox for PSC-BL1 exit (0x50011f50) I> Sending opcode 0x4d420802 to psc ▒▒INFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x848000000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: e061f86-9e1f578-2508c43-dev-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ▒▒I> Received ACK from psc I> Task: Sta▒▒INFO: MONITOR: user task addr:0x848022000, blob offset:0x00020000 ▒▒ ▒▒rt secure NOR provision (0x50014924) I> Task: Load FSI keyblob (0x50012368) I> Skipping FSI key blob copy I> Task: Unhalt AUXPs (0x50020c8c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x5001347c) I> Task: Load TOS (0x50013b38) I> Task: Load and authenticate registered FWs (0x50017428) I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_cpu-bo▒▒[ 2.364964] Camera-FW on t234-rce-safe started TCU early console enabled. ▒▒bpmp: init bpmp: bas▒▒INFO: MONITOR: popula▒▒e binary md5 is eac380526d68ff45ffc86d0feae98e88 bpmp: combined binary md5 is▒▒ted user images:19 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. ▒▒ 888a114dda6bea50b6c6bb224445ac85 bpmp: firmware tag is 888a114dda6bea50b6c6-eac380526d6 initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized thermal initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator ▒▒ ▒▒otloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader▒▒initialized avfs_clk_platform initialized powergate ▒▒ ▒▒initialized dvs initialized clk_mach_config initialized pm initialized suspend initialized strap initialized emc initialized emc_mrq initialized clk_cal initialized uphy_dt initialized uphy_mrq ▒▒I> Scratch R▒▒initialized uphy ▒▒SV109: 0x00000001 active chain: 0 I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os ▒▒initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq initialized mce_dbell missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ▒▒I> MB2-params @ 0x400600▒▒initialized clk_cal_late initialized noc_late initialized dmce initialized cvc ▒▒00 I> cpubl: Authentication Fi▒▒initialized avfs_clk_mach_post initialized pm_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable adspneon enable can1_core enable can1_host enable can2_core enable can2_host enable mss_encrypt enable maud enable nvdec enable pllg_ref enable dsi_core enable aza_2xbit enable pllc4_muxed enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux ▒▒[ 2.604454] Camer▒▒enable dsi_lp enable▒▒a-FW on t234-rce-safe ready SHA1=7a10e461 (crt 13.247 ms, total boot 262.075 m▒▒ sdmmc_legacy_tm initialized clk_mach_post initialized pg_post initialized ▒▒s) ▒▒regulator_post initialized profile initialized fuse_late initialized mrq initialized patrol_scrubber initialized extras_post bpmp: init complete ▒▒nalize Done I> Binary cpubl loaded successfully at 0x82c400000 ▒▒DCE: FW Boot Done ▒▒I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x831e06000 I> Relocating OP-TEE dtb from: 0x831eff700 to 0x82b700000, size: 0x996 I> [0] START: 0x80000000, SIZE: 0x7ab600000 I> [1] START: 0x82c400000, SIZE: 0x400000 I> [2] START: 0x82d000000, SIZE: 0x800000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x82d000400 I> EKB detected (length: 0x410) @ VA:0x82d000400 I> Task: Prepare TOS params (0x50013ab0) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x82b700000 I> Task: OEM SC7 context save (0x500146bc) I> oem sc7 context saved I> Task: Disable MSS perf stats (0x50020d18) I> Task: Program display sticky bits (0x50020c94) I> Task: Storage device deinit (0x50001ed8) I> Task: SMMU external bypass disable (0x50011eb4) I> Task: SMMU init (0x50011dd0) I> Task: Program CBB PCIE AMAP regions (0x50014b08) I> Task: Program GICv3 registers (0x50020db8) I> Task: Audit firewall settings (0x5001e1c0) I> Task: Bootchain failure check (0x500026a4) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ▒▒NOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 03:23:19 UTC 2022 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! E/TC:00 0 jetson_user_key_pta_init:700 jetson_user_key_pta_init: Failed (f0100006). E/TC:00 0 call_initcalls:43 Initcall __text_start + 0x000dab50 failed I/TC: Primary CPU switching to normal world boot ▒▒ Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) ▒▒Unhandled Exception in EL3. x30 = 0x0000000050000c88 x0 = 0x0000000000000000 x1 = 0x00000000be000011 x2 = 0x0000000000000000 x3 = 0x0000000000000011 x4 = 0x0000000000100000 x5 = 0x000000082c7fe608 x6 = 0x0000000001000000 x7 = 0x0000000001000000 x8 = 0x00180301d3719223 x9 = 0x000000005001c380 x10 = 0x55aaa0550733bd35 x11 = 0x55aa8255ce1abe91 x12 = 0x0a0341d0000c0102 x13 = 0x0004ff7f00000000 x14 = 0x00000008043cfaec x15 = 0x00000008043cfa54 x16 = 0x0000000827930fc8 x17 = 0x0000000001c598d0 x18 = 0x000000082784b310 x19 = 0x000000005001cec0 x20 = 0x0000000000000000 x21 = 0x0000000000000000 x22 = 0x0000000000000000 x23 = 0x0000000000000000 x24 = 0x0000000000000000 x25 = 0x0000000000000000 x26 = 0x0000000000000000 x27 = 0x0000000000000000 x28 = 0x0000000000000000 x29 = 0x0000000000000000 scr_el3 = 0x000000000003073d sctlr_el3 = 0x00000000b0cd183f cptr_el3 = 0x0000000000000000 tcr_el3 = 0x0000000080823518 daif = 0x00000000000002c0 mair_el3 = 0x00000000004404ff spsr_el3 = 0x00000000600003c9 elr_el3 = 0x0000000827845a80 ttbr0_el3 = 0x0000000050026ac1 esr_el3 = 0x00000000be000011 far_el3 = 0x0000000000000000 spsr_el1 = 0x0000000000000000 elr_el1 = 0x0000000000000000 spsr_abt = 0x0000000000000000 spsr_und = 0x0000000000000000 spsr_irq = 0x0000000000000000 spsr_fiq = 0x0000000000000000 sctlr_el1 = 0x0000000030d00800 actlr_el1 = 0x0000000000000000 cpacr_el1 = 0x0000000000300000 csselr_el1 = 0x0000000000000000 sp_el1 = 0x0000000000000000 esr_el1 = 0x0000000000000000 ttbr0_el1 = 0x0000000000000000 ttbr1_el1 = 0x0000000000000000 mair_el1 = 0x0000000000000000 amair_el1 = 0x0000000000000000 tcr_el1 = 0x0000000000000000 tpidr_el1 = 0x0000000000000000 tpidr_el0 = 0x0000000080000000 tpidrro_el0 = 0x0000000000000000 par_el1 = 0x0000000000000800 mpidr_el1 = 0x0000000081000000 afsr0_el1 = 0x0000000000000000 afsr1_el1 = 0x0000000000000000 contextidr_el1 = 0x0000000000000000 vbar_el1 = 0x0000000000000000 cntp_ctl_el0 = 0x0000000000000005 cntp_cval_el0 = 0x000000001546a69b cntv_ctl_el0 = 0x0000000000000000 cntv_cval_el0 = 0x0000000000000000 cntkctl_el1 = 0x0000000000000000 sp_el0 = 0x000000082784b310 isr_el1 = 0x0000000000000040 cpuectlr_el1 = 0xa000000b40543000 gicd_ispendr regs (Offsets 0x200 - 0x278) Offset: value 0000000000000200: 0x0000000000000000 0000000000000204: 0x0000000000000000 0000000000000208: 0x0000000000000000 000000000000020c: 0x0000000000000000 0000000000000210: 0x0000000000000000 0000000000000214: 0x0000000000000000 0000000000000218: 0x0000000000000000 000000000000021c: 0x0000000000020000 0000000000000220: 0x0000000000000000 0000000000000224: 0x0000000000000000 0000000000000228: 0x0000000000000000 000000000000022c: 0x0000000000000000 0000000000000230: 0x0000000000000000 0000000000000234: 0x0000000000000000 0000000000000238: 0x0000000000000000 000000000000023c: 0x0000000000000000 0000000000000240: 0x0000000000000000 0000000000000244: 0x0000000000000000 0000000000000248: 0x0000000000000000 000000000000024c: 0x0000000000000000 0000000000000250: 0x0000000000000000 0000000000000254: 0x0000000000000000 0000000000000258: 0x0000000000000000 000000000000025c: 0x0000000000000000 0000000000000260: 0x0000000000000000 0000000000000264: 0x0000000000000000 0000000000000268: 0x0000000000000000 000000000000026c: 0x0000000000000000 0000000000000270: 0x0000000000000000 0000000000000274: 0x0000000000000000 0000000000000278: 0x0000000000000000 000000000000027c: 0x0000000000000000