▒▒ [0000.024] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.055] I> Ram repair fuse : 0x0 [0000.058] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x0, rst_level: 0x0 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.107] I> Temperature = 37000 [0000.110] W> Skipping boost for clk: BPMP_CPU_NIC [0000.115] W> Skipping boost for clk: BPMP_APB [0000.119] W> Skipping boost for clk: AXI_CBB [0000.123] W> Skipping boost for clk: AON_CPU_NIC [0000.127] W> Skipping boost for clk: CAN1 [0000.131] W> Skipping boost for clk: CAN2 [0000.135] I> Boot-device: QSPI (instance: 0) [0000.139] I> Qspi flash params source = mb1bct [0000.143] I> Qspi clock source : pllc_out0 [0000.147] I> Qspi-0 reinitialized [0000.150] I> Qspi flash params source = mb1bct [0000.163] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.170] W> Thermal config not found in BCT [0000.178] W> MEMIO rail config not found in BCT [0000.188] I> Qspi flash params source = mb1bct [0000.201] I> Qspi flash params source = mb1bct [0000.235] I> Qspi flash params source = mb1bct [0000.799] I> Qspi flash params source = mb1bct [0000.816] I> Qspi flash params source = mb1bct [0000.855] W> Platform config not found in BCT [0000.882] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ▒▒▒▒main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ▒▒ [0000.917] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.918] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.918] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.919] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.925] W> device prod register failed [0000.928] I> gpio framework initialized [0000.932] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.939] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.947] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.956] I> qspi flash-0 params source = boot args [0000.961] I> QSPI-0l initialized successfully [0000.965] I> sdmmc-3 params source = safe params [0001.396] I> sdmmc DDR50 mode [0001.414] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.431] W> Cannot find any partition table for 00000003 [0001.432] > PARTITION_MANAGER: Failed to publish partition. [0001.448] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.449] I> Active Boot chain : 0 [0002.120] I> Relocating BR-BCT [0002.121] > DEVICE_PROD: device prod is not initialized. [0002.147] E> I2C: slave not found in slaves. [0002.148] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.149] E> I2C_DEV: Failed to send register address 0x00000000. [0002.150] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. [0002.151] E> eeprom: Failed to read I2C slave device [0002.154] I> Failed to read CVB eeprom data @ AE [0002.158] I> Retrying CVB eeprom read @ AC ... [0002.163] E> I2C: slave not found in slaves. [0002.167] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0002.174] E> I2C_DEV: Failed to send register address 0x00000000. [0002.180] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0002.189] E> eeprom: Failed to read I2C slave device [0002.194] I> Failed to read CVB eeprom data @ AC [0002.456] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.456] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.457] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.457] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.458] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.458] I> dram_block larger than 80000000 [0002.461] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.472] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.475] I> found decompressor handler: lz4 [0002.703] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.704] I> Setting EKB blob info to OPTEE dtb finished. ▒▒NOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ▒▒ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ▒▒I▒▒clk_early initialized ▒▒/TC: ▒▒mail_early initialized ▒▒No▒▒fuse initialized hwwdt initialized ▒▒n-se▒▒t194_ec_get_ec_list: found 45 ecs ▒▒cure extern▒▒ec initialized ▒▒a▒▒vmon_setup_monitors: found 3 monitors vmon initialized ▒▒l D▒▒adc initialized fmon_populate_monitors: found 73 monitors ▒▒T found ▒▒fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ▒▒I/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug▒▒clk_dt_late initialized noc_late initialized ▒▒ ▒▒pm_post initialized dbells initialized ▒▒11 ▒▒dmce initialized ▒▒0▒▒cvc initialized ▒▒3:23:20 UTC ▒▒avfs_clk_mach_post initialized ▒▒2022▒▒avfs_clk_platform_post initialized ▒▒ aa▒▒cvc_late initialized regulator_post initialized ▒▒rch6▒▒rm initialized console_late initialized clk_dt_post initialized mc_reg initialized ▒▒4 I/TC: WARNIN▒▒pg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ▒▒G: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ▒▒ [0003.323] I> Welcome to NVDisp-Init [0003.323] I> NVDisp-Init version: t194-f9ecfedc [0003.323] I> CPU-BL Params @ 0xca020000 [0003.324] I> 0) Base:0x00000000 Size:0x00000000 [0003.324] I> 1) Base:0xc8300000 Size:0x00100000 [0003.324] I> 2) Base:0xc9800000 Size:0x00200000 [0003.325] I> 3) Base:0xc8600000 Size:0x00200000 [0003.327] I> 4) Base:0xc8200000 Size:0x00100000 [0003.332] I> 5) Base:0xc8100000 Size:0x00100000 [0003.336] I> 6) Base:0xc9400000 Size:0x00400000 [0003.341] I> 7) Base:0xc9000000 Size:0x00400000 [0003.345] I> 8) Base:0xc8000000 Size:0x00100000 [0003.350] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.354] I> 10) Base:0xca800000 Size:0x00800000 [0003.358] I> 11) Base:0x40000000 Size:0x00040000 [0003.363] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.367] I> 13) Base:0x40046000 Size:0x00002000 [0003.372] I> 14) Base:0x40048000 Size:0x00002000 [0003.376] I> 15) Base:0xaf000000 Size:0x00004000 [0003.381] I> 16) Base:0x4004a000 Size:0x00002000 [0003.385] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.390] I> 18) Base:0x4004c000 Size:0x00002000 [0003.394] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.399] I> 20) Base:0x4004e000 Size:0x00002000 [0003.403] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.408] I> 22) Base:0x00000000 Size:0x00000000 [0003.412] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.416] I> 24) Base:0xcc000000 Size:0x02000000 [0003.421] I> 25) Base:0x40050000 Size:0x00002000 [0003.425] I> 26) Base:0x40040000 Size:0x00006000 [0003.430] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.434] I> 28) Base:0xc8400000 Size:0x00200000 [0003.439] I> 29) Base:0xc8800000 Size:0x00400000 [0003.443] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.448] I> 31) Base:0x00000000 Size:0x00000000 [0003.452] I> 32) Base:0xf8000000 Size:0x08000000 [0003.457] I> 33) Base:0xce000000 Size:0x2a000000 [0003.461] I> 34) Base:0xcb000000 Size:0x01000000 [0003.466] I> 35) Base:0xae000000 Size:0x01000000 [0003.470] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.475] I> 37) Base:0xca000000 Size:0x00800000 [0003.479] I> 38) Base:0x80000000 Size:0x20000000 [0003.483] I> 39) Base:0xb0000000 Size:0x08000000 [0003.488] I> 40) Base:0x00000000 Size:0x00000000 [0003.492] I> 41) Base:0x00000000 Size:0x00000000 [0003.497] I> 42) Base:0x00000000 Size:0x00000000 [0003.501] I> 43) Base:0x00000000 Size:0x00000000 [0003.506] I> 44) Base:0x00000000 Size:0x00000000 [0003.510] I> 45) Base:0x00000000 Size:0x00000000 [0003.515] GIC-SPI Target CPU: 0 [0003.518] Interrupts Init done [0003.521] calling constructors [0003.523] initializing heap [0003.526] I> Heap: [0xa0960000 ... 0xadf00000] [0003.530] initializing threads [0003.533] initializing timers [0003.536] creating bootstrap completion thread [0003.540] top of bootstrap2() [0003.543] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.548] initializing platform [0003.551] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.556] W> device prod register failed [0003.560] I> Bl_dtb @0xadf00000 [0003.563] I> gpio framework initialized [0003.574] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.579] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.586] I> fixed regulator driver initialized [0003.601] I> register 'maxim' power off handle [0003.603] I> virtual i2c enabled [0003.604] I> registered 'maxim,max20024' pmic [0003.604] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.604] I> Boot-device: QSPI [0003.607] I> Boot_device: QSPI_FLASH instance: 0 [0003.612] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.622] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.629] I> QSPI source rate = 204000 Khz [0003.633] I> Requested rate for QSPI clock = 34000 Khz [0003.638] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.643] I> tx_clk_tap_delay : 0 [0003.645] I> rx_clk_tap_delay : 16 [0003.649] I> QSPI Flash Size = 32 MB [0003.657] I> Qspi initialized successfully [0003.657] I> qspi flash-0 params source = boot args [0003.661] W> No board IDs available [0003.664] E> Failed to get board id info! [0003.670] I> sdmmc-3 params source = safe params [0003.677] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.679] W> Cannot find any partition table for 00000003 [0003.683] E> Failed to publish 00000003 [0003.692] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.711] I> regulator 'vdd-hdmi-5v0' already enabled [0003.718] I> regulator 'vdd-hdmi-5v0' already enabled [0003.718] E> tegrabl_display_init_regulator: hdmi cable is not connected [0003.719] E> tegrabl_display_get_pdata, failed to parse dtb settings [0003.726] E> invalid display type [0003.728] E> cannot find any other nvdisp nodes [0003.728] E> no valid display unit config found in dtb [0003.731] W> display init failed [0003.731] initializing target [0003.733] calling apps_init() [0003.736] starting app kernel_boot_app [0003.739] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) Press ESCAPE for boot options ** WARNING: Test Key is used. ** . L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ▒▒I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ▒▒[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x277587698 SMBIOS=0xc7db0000 SMBIOS 3.0=0x258a30000 MEMATTR=0x2593cf018 ESRT=0x25943fc98 RNG=0x27c595918 MEMRESERVE=0x2593d0f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025943fc98 to 0x000000025943fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025852ffff] [ 0.000000] node 0: [mem 0x0000000258530000-0x000000025855ffff] [ 0.000000] node 0: [mem 0x0000000258560000-0x00000002586c5fff] [ 0.000000] node 0: [mem 0x00000002586c6000-0x000000025888dfff] [ 0.000000] node 0: [mem 0x000000025888e000-0x0000000258a1ffff] [ 0.000000] node 0: [mem 0x0000000258a20000-0x0000000258a3ffff] [ 0.000000] node 0: [mem 0x0000000258a40000-0x00000002591fffff] [ 0.000000] node 0: [mem 0x0000000259200000-0x000000025938ffff] [ 0.000000] node 0: [mem 0x0000000259390000-0x000000025943ffff] [ 0.000000] node 0: [mem 0x0000000259440000-0x00000002595bffff] [ 0.000000] node 0: [mem 0x00000002595c0000-0x00000002595cffff] [ 0.000000] node 0: [mem 0x00000002595d0000-0x000000025969ffff] [ 0.000000] node 0: [mem 0x00000002596a0000-0x00000002596affff] [ 0.000000] node 0: [mem 0x00000002596b0000-0x00000002596fffff] [ 0.000000] node 0: [mem 0x0000000259700000-0x000000025977ffff] [ 0.000000] node 0: [mem 0x0000000259780000-0x0000000259a9ffff] [ 0.000000] node 0: [mem 0x0000000259aa0000-0x0000000259abffff] [ 0.000000] node 0: [mem 0x0000000259ac0000-0x0000000259b2ffff] [ 0.000000] node 0: [mem 0x0000000259b30000-0x0000000259fbffff] [ 0.000000] node 0: [mem 0x0000000259fc0000-0x000000025a00ffff] [ 0.000000] node 0: [mem 0x000000025a010000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839269 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 nv-auto-config [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6941652K/7473856K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 466668K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000847] Console: colour dummy device 80x25 [ 0.002264] printk: console [tty0] enabled [ 0.002325] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002361] pid_max: default: 32768 minimum: 301 [ 0.002580] LSM: Security Framework initializing [ 0.002642] Yama: becoming mindful. [ 0.002688] SELinux: Initializing. [ 0.002872] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002926] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006523] rcu: Hierarchical SRCU implementation. [ 0.006768] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007695] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007760] DTB Build time: Aug 10 2022 20:31:49 [ 0.011221] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011517] Remapping and enabling EFI services. [ 0.013094] smp: Bringing up secondary CPUs ... [ 0.042580] Detected PIPT I-cache on CPU1 [ 0.042660] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072179] Detected PIPT I-cache on CPU2 [ 0.072328] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101940] Detected PIPT I-cache on CPU3 [ 0.102082] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131766] Detected PIPT I-cache on CPU4 [ 0.131920] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161546] Detected PIPT I-cache on CPU5 [ 0.161638] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162856] smp: Brought up 1 node, 6 CPUs [ 0.163069] SMP: Total of 6 processors activated. [ 0.163107] CPU features: detected: Privileged Access Never [ 0.163128] CPU features: detected: LSE atomic instructions [ 0.163142] CPU features: detected: User Access Override [ 0.163156] CPU features: detected: 32-bit EL0 Support [ 0.163169] CPU features: detected: RAS Extension Support [ 0.163181] CPU features: detected: CRC32 instructions [ 0.163194] CPU features: detected: 32-bit EL1 Support [ 0.236246] CPU: All CPU(s) started at EL2 [ 0.242061] devtmpfs: initialized [ 0.288578] Registered cp15_barrier emulation handler [ 0.288687] Registered setend emulation handler [ 0.288711] KASLR enabled [ 0.288929] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288954] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290320] pinctrl core: initialized pinctrl subsystem [ 0.291470] SMBIOS 3.0.0 present. [ 0.291498] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292117] NET: Registered protocol family 16 [ 0.294092] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294648] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295354] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295412] audit: initializing netlink subsys (disabled) [ 0.295699] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296095] thermal_sys: Registered thermal governor 'step_wise' [ 0.296101] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296116] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298424] cpuidle: using governor menu [ 0.298820] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299254] ASID allocator initialised with 32768 entries [ 0.299483] Serial: AMBA PL011 UART driver [ 0.302533] Tegra reboot handler registered. [ 0.372647] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372750] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.372956] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373014] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373128] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373167] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373281] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373323] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.373476] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.373517] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375774] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375807] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375834] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375859] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375888] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375913] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375950] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375979] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376026] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376050] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376089] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376112] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376152] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376175] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376197] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376220] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.376242] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376326] mc-err: mcerr ops are set to t19x [ 0.388172] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388193] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.388206] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.388218] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.394143] ACPI: Interpreter disabled. [ 0.395258] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.396404] iommu: Default domain type: Translated [ 0.396468] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396849] SCSI subsystem initialized [ 0.396996] usbcore: registered new interface driver usbfs [ 0.397035] usbcore: registered new interface driver hub [ 0.397071] usbcore: registered new device driver usb [ 0.397438] mc: Linux media interface: v0.10 [ 0.397464] videodev: Linux video capture interface: v2.00 [ 0.397785] pps_core: LinuxPPS API ver. 1 registered [ 0.397797] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397819] PTP clock support registered [ 0.398016] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.398353] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398465] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.399089] Registered efivars operations [ 0.399500] FPGA manager framework [ 0.399594] Advanced Linux Sound Architecture Driver Initialized. [ 0.400160] Bluetooth: Core ver 2.22 [ 0.400206] NET: Registered protocol family 31 [ 0.400218] Bluetooth: HCI device and connection manager initialized [ 0.400234] Bluetooth: HCI socket layer initialized [ 0.400249] Bluetooth: L2CAP socket layer initialized [ 0.400271] Bluetooth: SCO socket layer initialized [ 0.402478] camchar: rtcpu character device driver loaded [ 0.403426] clocksource: Switched to clocksource arch_sys_counter [ 0.818088] VFS: Disk quotas dquot_6.6.0 [ 0.818178] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.818642] pnp: PnP ACPI: disabled [ 0.832897] la/ptsa driver initialized. [ 0.833048] NET: Registered protocol family 2 [ 0.833262] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.840890] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.841043] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.841410] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.842033] TCP: Hash tables configured (established 65536 bind 65536) [ 0.842165] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.842291] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.842565] NET: Registered protocol family 1 [ 0.843299] RPC: Registered named UNIX socket transport module. [ 0.843327] RPC: Registered udp transport module. [ 0.843341] RPC: Registered tcp transport module. [ 0.843353] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.843394] PCI: CLS 0 bytes, default 64 [ 0.843781] Trying to unpack rootfs image as initramfs... [ 1.115756] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.118935] Freeing initrd memory: 8196K [ 1.123640] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.123706] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.123761] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.124085] kvm [1]: IPA Size Limit: 40 bits [ 1.124542] kvm [1]: vgic interrupt IRQ9 [ 1.125032] kvm [1]: VHE mode initialized successfully [ 1.126591] Initialise system trusted keyrings [ 1.126891] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.133365] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.134170] NFS: Registering the id_resolver key type [ 1.134216] Key type id_resolver registered [ 1.134230] Key type id_legacy registered [ 1.134342] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.134369] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.134404] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.144045] NET: Registered protocol family 38 [ 1.144068] Key type asymmetric registered [ 1.144083] Asymmetric key parser 'x509' registered [ 1.144130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.144395] io scheduler mq-deadline registered [ 1.144414] io scheduler kyber registered [ 1.150288] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.153329] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.153413] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.153482] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.153557] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.153625] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.159164] scrncapt: init (heads:4 wins:6 planes:4) [ 1.159391] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.160420] EINJ: ACPI disabled. [ 1.163820] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.163845] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 1.163860] tegra-pmc: ### PMC reset level: L0 [ 1.163873] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.163918] tegra-pmc: PMC Prod config success [ 1.169145] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.186498] random: fast init done [ 2.738750] printk: console [ttyTCU0] enabled [ 2.744594] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.749104] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.753762] arm-smmu 10000000.iommu: stage 1 translation [ 2.759450] arm-smmu 10000000.iommu: stage 2 translation [ 2.764669] arm-smmu 10000000.iommu: nested translation [ 2.770282] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.777218] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.788124] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.790373] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.797215] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.804681] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.809997] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.814729] arm-smmu 12000000.iommu: stage 1 translation [ 2.820230] arm-smmu 12000000.iommu: stage 2 translation [ 2.825914] arm-smmu 12000000.iommu: nested translation [ 2.831082] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.838260] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.848982] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.851361] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.857946] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.865713] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.875127] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.878357] tegra_profiler: auth: init [ 2.882891] THERMAL EST: found 3 subdevs [ 2.886036] THERMAL EST num_resources: 0 [ 2.890140] [THERMAL EST subdev 0] [ 2.893462] [THERMAL EST subdev 1] [ 2.896616] [THERMAL EST subdev 2] [ 2.900122] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.906560] THERMAL EST: thz register success. [ 2.910823] THERMAL EST: end of probe, return err: 0 [ 2.915964] nvsciipc: loaded module [ 2.923155] tun: Universal TUN/TAP device driver, 1.6 [ 2.925445] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.931939] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.937452] e1000e: Intel(R) PRO/1000 Network Driver [ 2.942375] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.948202] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.953749] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.959897] PPP generic driver version 2.4.2 [ 2.963925] PPP BSD Compression module registered [ 2.968470] PPP Deflate Compression module registered [ 2.973721] PPP MPPE Compression module registered [ 2.979001] usbcore: registered new interface driver r8152 [ 2.984248] usbcore: registered new interface driver asix [ 2.989839] usbcore: registered new interface driver ax88179_178a [ 2.995703] usbcore: registered new interface driver cdc_ether [ 3.001644] usbcore: registered new interface driver net1080 [ 3.007267] usbcore: registered new interface driver cdc_subset [ 3.013564] usbcore: registered new interface driver zaurus [ 3.019281] usbcore: registered new interface driver cdc_ncm [ 3.024916] usbcore: registered new interface driver aqc111 [ 3.030385] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.036651] ohci-pci: OHCI PCI platform driver [ 3.040702] ohci-platform: OHCI generic platform driver [ 3.046919] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.052713] usbcore: registered new interface driver uas [ 3.057241] usbcore: registered new interface driver usb-storage [ 3.063128] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.069332] mousedev: PS/2 mouse device common for all mice [ 3.074402] usbcore: registered new interface driver xpad [ 3.082377] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.084898] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:21 UTC (21) [ 3.092927] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.099295] i2c /dev entries driver [ 3.102595] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.108496] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.113941] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.119119] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.124409] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.130125] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.135578] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.149701] device-mapper: uevent: version 1.0.3 [ 3.150141] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.156353] cpuidle: Initializing cpuidle driver [ 3.160084] sdhci: Secure Digital Host Controller Interface driver [ 3.164720] sdhci: Copyright(c) Pierre Ossman [ 3.168565] Synopsys Designware Multimedia Card Interface Driver [ 3.174774] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.181017] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.181826] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.194307] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.217094] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.227455] vdd-1v0: supplied by regulator-dummy [ 3.233267] vdd-1v8-hs: supplied by regulator-dummy [ 3.238350] vdd-1v8-ls: supplied by regulator-dummy [ 3.243603] vdd-1v8-ao: supplied by regulator-dummy [ 3.247830] vddio-ddr-1v1: supplied by regulator-dummy [ 3.252861] vdd-rtc: supplied by regulator-dummy [ 3.254853] spmic-ldo1: supplied by regulator-dummy [ 3.256656] vdd-ao-3v3: supplied by regulator-dummy [ 3.263463] vddio-emmc-3v3: supplied by regulator-dummy [ 3.269988] spmic-ldo4: supplied by regulator-dummy [ 3.271789] vdd-usb-3v3: supplied by regulator-dummy [ 3.278614] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.285303] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.291691] spmic-ldo8: supplied by vdd-1v8-ls [ 3.293722] gpio-510 (gpio_default): hogged as output/high [ 3.295670] gpio-511 (gpio_default): hogged as output/high [ 3.298548] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.434376] max77686-rtc max77620-rtc: registered as rtc0 [ 3.435675] max77620-power max20024-power: Event recorder REG_NVERC : 0x44 [ 3.436035] max77620 4-003c: max77620 probe successful ▒▒rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ▒▒[ 4.252147] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.253490] hid: raw HID events driver (C) Jiri Kosina [ 4.254305] usbcore: registered new interface driver usbhid [ 4.254477] usbhid: USB HID core driver [ 4.256654] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.258010] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ▒▒[ 22.623105] Camera-FW on t194-rce-safe started TCU early console enabled. [ 22.697213] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.916 ms) ▒▒[ 4.342369] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.342925] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.344063] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.344698] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.346291] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.346953] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.347725] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.348885] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.349151] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.351495] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.358277] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.364809] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.369934] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.375981] denver_knobs_init:MTS_VERSION:55637613 [ 4.387846] t19x_cache tegra-cache: probed [ 4.390836] optee: probing for conduit method. [ 4.391739] optee: revision 3.16 (65cc2218) [ 4.392690] optee: dynamic shared memory is enabled [ 4.396894] optee: initialized driver [ 4.403648] nvpmodel: initialized successfully [ 4.404829] tegra_hv: get_hvd: not initialized yet [ 4.409419] user_ivc_mempool: hypervisor not present [ 4.415198] usbcore: registered new interface driver snd-usb-audio [ 4.422008] u32 classifier [ 4.422923] input device check on [ 4.426699] Actions configured [ 4.430514] Initializing XFRM netlink socket [ 4.435322] NET: Registered protocol family 10 [ 4.441309] Segment Routing with IPv6 [ 4.442748] NET: Registered protocol family 17 [ 4.447048] NET: Registered protocol family 15 [ 4.451256] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.464622] Bluetooth: RFCOMM socket layer initialized [ 4.469453] Bluetooth: RFCOMM ver 1.11 [ 4.473605] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.479257] Bluetooth: HIDP socket layer initialized [ 4.485284] 9pnet: Installing 9P2000 support [ 4.488912] Key type dns_resolver registered [ 4.493988] registered taskstats version 1 [ 4.497339] Loading compiled-in X.509 certificates [ 4.510681] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.512933] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.523255] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.525064] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.533849] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.541960] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 5.660160] tegra194-pcie 14160000.pcie: Phy link never came up [ 5.660631] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 5.660829] pci_bus 0004:00: root bus resource [bus 00-ff] [ 5.660974] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 5.661306] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 5.661535] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 5.661937] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 5.662505] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 5.684471] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 5.684727] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.686407] pcieport 0004:00:00.0: Adding to iommu group 6 [ 5.687910] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 5.689398] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 5.690988] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 5.691959] pci 0004:00:00.0: Removing from iommu group 6 [ 5.692501] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 5.696509] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 5.702053] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 5.702395] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 5.702680] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 5.705556] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.819546] tegra194-pcie 141a0000.pcie: Link up [ 5.822354] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.822578] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.822733] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.823003] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.823196] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.823595] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.824012] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.835626] pci 0005:01:00.0: [12d8:c008] type 01 class 0x060400 [ 5.836098] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.837659] pci 0005:01:00.0: PME# supported from D0 D3hot D3cold [ 5.846082] pci 0005:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.848516] pci 0005:02:04.0: [12d8:c008] type 01 class 0x060400 [ 5.850331] pci 0005:02:04.0: PME# supported from D0 D3hot D3cold [ 5.852475] pci 0005:02:05.0: [12d8:c008] type 01 class 0x060400 [ 5.854294] pci 0005:02:05.0: PME# supported from D0 D3hot D3cold [ 5.856427] pci 0005:02:06.0: [12d8:c008] type 01 class 0x060400 [ 5.858172] pci 0005:02:06.0: PME# supported from D0 D3hot D3cold [ 5.860576] pci 0005:02:07.0: [12d8:c008] type 01 class 0x060400 [ 5.862235] pci 0005:02:07.0: PME# supported from D0 D3hot D3cold [ 5.869152] pci 0005:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.869518] pci 0005:02:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.877191] pci 0005:02:06.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.885289] pci 0005:02:07.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.893688] pci 0005:03:00.0: [8086:1533] type 00 class 0x020000 [ 5.899255] pci 0005:03:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.905096] pci 0005:03:00.0: reg 0x18: [io 0x0000-0x001f] [ 5.911053] pci 0005:03:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 5.918067] pci 0005:03:00.0: PME# supported from D0 D3hot D3cold [ 5.942605] pci_bus 0005:03: busn_res: [bus 03-ff] end is updated to 03 [ 5.944038] pci 0005:04:00.0: [8086:1533] type 00 class 0x020000 [ 5.944452] pci 0005:04:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.944786] pci 0005:04:00.0: reg 0x18: [io 0x0000-0x001f] [ 5.947889] pci 0005:04:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 5.955033] pci 0005:04:00.0: PME# supported from D0 D3hot D3cold [ 5.978138] pci_bus 0005:04: busn_res: [bus 04-ff] end is updated to 04 [ 5.979184] pci 0005:05:00.0: [8086:1533] type 00 class 0x020000 [ 5.979588] pci 0005:05:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.979958] pci 0005:05:00.0: reg 0x18: [io 0x0000-0x001f] [ 5.985062] pci 0005:05:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 5.992075] pci 0005:05:00.0: PME# supported from D0 D3hot D3cold [ 6.015096] pci_bus 0005:05: busn_res: [bus 05-ff] end is updated to 05 [ 6.022000] pci_bus 0005:06: busn_res: [bus 06-ff] end is updated to 06 [ 6.022339] pci_bus 0005:02: busn_res: [bus 02-ff] end is updated to 06 [ 6.022669] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f403fffff] [ 6.024868] pci 0005:00:00.0: BAR 13: assigned [io 0x100000-0x102fff] [ 6.031509] pci 0005:01:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f402fffff] [ 6.038659] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40300000-0x1f4037ffff] [ 6.046032] pci 0005:01:00.0: BAR 13: assigned [io 0x100000-0x102fff] [ 6.052198] pci 0005:02:04.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 6.059522] pci 0005:02:05.0: BAR 14: assigned [mem 0x1f40100000-0x1f401fffff] [ 6.066658] pci 0005:02:06.0: BAR 14: assigned [mem 0x1f40200000-0x1f402fffff] [ 6.073881] pci 0005:02:04.0: BAR 13: assigned [io 0x100000-0x100fff] [ 6.080474] pci 0005:02:05.0: BAR 13: assigned [io 0x101000-0x101fff] [ 6.086655] pci 0005:02:06.0: BAR 13: assigned [io 0x102000-0x102fff] [ 6.093381] pci 0005:03:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f4007ffff] [ 6.100719] pci 0005:03:00.0: BAR 3: assigned [mem 0x1f40080000-0x1f40083fff] [ 6.107729] pci 0005:03:00.0: BAR 2: assigned [io 0x100000-0x10001f] [ 6.114112] pci 0005:02:04.0: PCI bridge to [bus 03] [ 6.119100] pci 0005:02:04.0: bridge window [io 0x100000-0x100fff] [ 6.125837] pci 0005:02:04.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 6.133147] pci 0005:04:00.0: BAR 0: assigned [mem 0x1f40100000-0x1f4017ffff] [ 6.140351] pci 0005:04:00.0: BAR 3: assigned [mem 0x1f40180000-0x1f40183fff] [ 6.147467] pci 0005:04:00.0: BAR 2: assigned [io 0x101000-0x10101f] [ 6.154285] pci 0005:02:05.0: PCI bridge to [bus 04] [ 6.159006] pci 0005:02:05.0: bridge window [io 0x101000-0x101fff] [ 6.165827] pci 0005:02:05.0: bridge window [mem 0x1f40100000-0x1f401fffff] [ 6.172814] pci 0005:05:00.0: BAR 0: assigned [mem 0x1f40200000-0x1f4027ffff] [ 6.179906] pci 0005:05:00.0: BAR 3: assigned [mem 0x1f40280000-0x1f40283fff] [ 6.187185] pci 0005:05:00.0: BAR 2: assigned [io 0x102000-0x10201f] [ 6.193932] pci 0005:02:06.0: PCI bridge to [bus 05] [ 6.198662] pci 0005:02:06.0: bridge window [io 0x102000-0x102fff] [ 6.205026] pci 0005:02:06.0: bridge window [mem 0x1f40200000-0x1f402fffff] [ 6.212728] pci 0005:02:07.0: PCI bridge to [bus 06] [ 6.217457] pci 0005:01:00.0: PCI bridge to [bus 02-06] [ 6.222470] pci 0005:01:00.0: bridge window [io 0x100000-0x102fff] [ 6.229040] pci 0005:01:00.0: bridge window [mem 0x1f40000000-0x1f402fffff] [ 6.236320] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 6.241303] pci 0005:00:00.0: bridge window [io 0x100000-0x102fff] [ 6.247724] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f403fffff] [ 6.254702] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 6.263499] pci 0005:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.272141] pci 0005:02:04.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.280319] pci 0005:03:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 6.289243] pci 0005:02:05.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.297572] pci 0005:04:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 6.306310] pci 0005:02:06.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.314664] pci 0005:05:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 6.323099] pci 0005:02:07.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.333373] pcieport 0005:00:00.0: Adding to iommu group 7 [ 6.338666] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 6.344335] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 6.350016] pcieport 0005:01:00.0: Adding to iommu group 7 [ 6.354682] pcieport 0005:01:00.0: enabling device (0000 -> 0003) [ 6.363303] pcieport 0005:02:04.0: Adding to iommu group 7 [ 6.366209] pcieport 0005:02:04.0: enabling device (0000 -> 0003) [ 6.375128] pcieport 0005:02:05.0: Adding to iommu group 7 [ 6.377664] pcieport 0005:02:05.0: enabling device (0000 -> 0003) [ 6.386766] pcieport 0005:02:06.0: Adding to iommu group 7 [ 6.389422] pcieport 0005:02:06.0: enabling device (0000 -> 0003) [ 6.398408] pcieport 0005:02:07.0: Adding to iommu group 7 [ 6.404886] igb 0005:03:00.0: Adding to iommu group 7 [ 6.405967] igb 0005:03:00.0: enabling device (0000 -> 0002) [ 6.448962] pps pps0: new PPS source ptp0 [ 6.449470] igb 0005:03:00.0: added PHC on eth0 [ 6.449644] igb 0005:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.449893] igb 0005:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 8c:f3:19:35:1c:c5 [ 6.450269] igb 0005:03:00.0: eth0: PBA No: 000500-000 [ 6.450433] igb 0005:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.452199] igb 0005:04:00.0: Adding to iommu group 7 [ 6.453188] igb 0005:04:00.0: enabling device (0000 -> 0002) [ 6.494575] pps pps1: new PPS source ptp1 [ 6.495037] igb 0005:04:00.0: added PHC on eth1 [ 6.495205] igb 0005:04:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.495515] igb 0005:04:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 8c:f3:19:35:1c:c6 [ 6.495833] igb 0005:04:00.0: eth1: PBA No: 000500-000 [ 6.495990] igb 0005:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.497553] igb 0005:05:00.0: Adding to iommu group 7 [ 6.499161] igb 0005:05:00.0: enabling device (0000 -> 0002) [ 6.543383] pps pps2: new PPS source ptp2 [ 6.543928] igb 0005:05:00.0: added PHC on eth2 [ 6.544107] igb 0005:05:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.544478] igb 0005:05:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 8c:f3:19:35:1c:c7 [ 6.544854] igb 0005:05:00.0: eth2: PBA No: 000500-000 [ 6.545009] igb 0005:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.580195] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.604307] host1x 13e10000.host1x: initialized [ 6.605929] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.606773] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.608180] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.608931] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.610056] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.610625] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.611949] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.612668] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.616997] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.623521] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.633601] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.640417] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.650794] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.657487] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.667546] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.674662] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.684369] falcon 15340000.vic: Adding to iommu group 17 [ 6.699611] falcon 15340000.vic: initialized [ 6.700611] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.706122] falcon 15380000.nvjpg: initialized [ 6.706713] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.716972] falcon 154c0000.nvenc: initialized [ 6.717659] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.727218] falcon 15a80000.nvenc1: initialized [ 6.727841] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.740032] nvdec 15480000.nvdec: initialized [ 6.740625] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.751098] nvdec 15140000.nvdec1: initialized [ 6.751689] tsec 15500000.tsec: Adding to iommu group 18 [ 6.756944] tsec 15500000.tsec: initialized [ 6.757460] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.764830] tsec 15100000.tsecb: initialized [ 6.768492] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.797429] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.809732] gpio-374 (wifi-enable): hogged as output/high [ 6.810009] gpio-431 (camera-control-output-low): hogged as output/low [ 6.810268] gpio-432 (camera-control-output-low): hogged as output/low [ 6.811880] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.813933] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.814574] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.816124] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.821649] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.827339] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.832752] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.841310] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.848417] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.860428] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.864773] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.870590] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.879731] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.888716] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.896209] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.903543] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.909761] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.919756] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.925694] pva 16000000.pva0: Adding to iommu group 22 [ 6.953770] pva 16000000.pva0: initialized [ 6.958555] pva 16800000.pva1: Adding to iommu group 23 [ 6.969920] pva 16800000.pva1: initialized [ 6.973819] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.986361] nvdla 15880000.nvdla0: initialized [ 6.987735] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.997289] nvdla 158c0000.nvdla1: initialized [ 7.001167] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 7.001469] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 7.001684] tegradc 15200000.display: Adding to iommu group 26 [ 7.001803] random: crng init done [ 7.003055] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 7.003105] tegradccommon 15200000.display-hub: host1x channel mapped [ 7.003704] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 7.003743] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 7.005067] tegradc 15210000.display: Adding to iommu group 26 [ 7.005669] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 7.012795] tegradccommon 15200000.display-hub: dma mapping done [ 7.018668] tegra_cec 3960000.tegra_cec: probed [ 7.019515] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 7.042469] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 7.047671] kfuse 3830000.kfuse: initialized [ 7.052160] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 7.058137] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 7.065432] serial-tegra 3100000.serial: Adding to iommu group 2 [ 7.071548] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 7.080827] serial-tegra 3110000.serial: Adding to iommu group 2 [ 7.086029] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 7.095261] serial-tegra 3140000.serial: Adding to iommu group 2 [ 7.101011] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 7.121137] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 7.121457] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.124343] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 7.132217] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 7.140911] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 7.147790] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.155239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.162448] usb usb1: Product: xHCI Host Controller [ 7.167400] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 7.173704] usb usb1: SerialNumber: 3610000.xhci [ 7.179317] hub 1-0:1.0: USB hub found [ 7.182026] hub 1-0:1.0: 4 ports detected [ 7.186562] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.191683] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 7.199023] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 7.207079] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 7.214875] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.221865] usb usb2: Product: xHCI Host Controller [ 7.226816] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 7.233035] usb usb2: SerialNumber: 3610000.xhci [ 7.238399] hub 2-0:1.0: USB hub found [ 7.241545] hub 2-0:1.0: 4 ports detected [ 7.284880] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 7.291848] i2c i2c-2: Added multiplexed i2c bus 9 [ 7.293562] i2c i2c-2: Added multiplexed i2c bus 10 [ 7.293759] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 7.307262] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1903000 KHz, changing to: 1907200 KHz [ 7.308313] tegra194-cpufreq ccplex: probed with BWMGR [ 7.309575] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 7.310073] irq: IRQ298: trimming hierarchy from :pmc@c360000 [ 7.310506] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 7.311717] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 7.318603] tegra194-vi5 15c10000.vi: initialized [ 7.320101] tegradc 15200000.display: disp0 connected to head0->sor1 [ 7.320849] mmc0: CQHCI version 5.10 [ 7.321270] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 7.321503] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 7.321509] nvethernet 2490000.ethernet: failed to read MDIO address [ 7.321518] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 7.321524] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 7.321528] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 7.321978] generic_infoframe_type: 0x87 [ 7.327568] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 7.331603] tegradc 15200000.display: DT parsed successfully [ 7.339715] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 7.346376] tegradc 15200000.display: Display dc.0000000050b610ae registered with id=0 [ 7.352820] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 7.354655] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 7.360526] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 7.367285] nvethernet 2490000.ethernet: Ethernet MAC address: 8c:f3:19:35:1c:c4 [ 7.369951] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 7.369956] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 7.370278] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 7.382116] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 7.383622] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.396830] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.403731] nvethernet 2490000.ethernet: Macsec not supported [ 7.414240] tegradc 15200000.display: probed [ 7.420842] nvethernet 2490000.ethernet: eth3 (HW ver: 50) created with 1 DMA channels [ 7.439782] mmc0: Command Queue Engine enabled [ 7.444404] irq: IRQ300: trimming hierarchy from :pmc@c360000 [ 7.449411] mmc0: periodic cache flush enabled [ 7.449424] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.449967] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.455507] irq: IRQ301: trimming hierarchy from :interrupt-controller@3881000 [ 7.463092] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 7.470353] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.476226] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.481821] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.501327] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.557006] tegra-se-nvhost 15810000.se: initialized [ 7.557032] Console: switching to colour frame buffer device 80x30 [ 7.566783] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.567735] tegradc 15200000.display: fb registered [ 7.574749] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.578895] irq: IRQ302: trimming hierarchy from :pmc@c360000 [ 7.585677] tegra-se-nvhost 15820000.se: initialized [ 7.591434] tegradc 15210000.display: disp1 connected to head1->sor [ 7.597562] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.602174] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.608519] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.615302] tegradc 15210000.display: DT parsed successfully [ 7.627654] tegradc 15210000.display: Display dc.0000000080c39a60 registered with id=1 [ 7.635559] tegradc 15210000.display: vblank syncpt # 13 for dc 1 [ 7.635582] tegra-se-nvhost 15830000.se: initialized [ 7.641812] tegradc 15210000.display: vpulse3 syncpt # 14 for dc 1 [ 7.648050] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.659256] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.659861] usb 1-2: New USB device found, idVendor=04b4, idProduct=6506, bcdDevice=50.00 [ 7.660692] tegradc 15210000.display: probed [ 7.678072] tegradc 15210000.display: fb registered [ 7.678078] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.678226] tegra-se-nvhost 15840000.se: initialized [ 7.679447] hub 1-2:1.0: USB hub found [ 7.679536] hub 1-2:1.0: 4 ports detected [ 7.698727] Reserved SVD code 117 [ 7.701043] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.702813] Reserved SVD code 118 [ 7.707991] tegra_actmon d230000.actmon: in actmon_register()... [ 7.720412] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.721879] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.727793] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.733313] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.739439] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 7.747320] hvc_sysfs: hypervisor is not present [ 7.784955] ALSA device list: [ 7.785058] No soundcards found. [ 7.787731] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using tegra-xusb [ 7.790828] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 7.799420] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 7.804778] dp lt: state 0 (Reset), pending_lt_evt 1 [ 7.804895] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 7.805084] dp lt: state 0 (Reset), pending_lt_evt 0 [ 7.807348] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 7.808016] usb 2-3: New USB device found, idVendor=04b4, idProduct=6504, bcdDevice=50.00 [ 7.810085] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 7.818392] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.824275] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 7.833260] hub 2-3:1.0: USB hub found [ 7.837734] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 7.837744] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 7.842045] hub 2-3:1.0: 4 ports detected [ 7.848409] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 7.848416] dp lt: tx_pu: 0x20 [ 7.892369] dp lt: CR not done [ 7.893371] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 7.893546] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 7.893734] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 7.894232] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 7.901429] dp lt: CR retry [ 7.904055] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 7.912019] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 7.918074] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 7.924623] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 7.931557] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 7.938270] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 7.945023] dp lt: tx_pu: 0x40 [ 7.967448] usb 1-2.3: new high-speed USB device number 3 using tegra-xusb [ 7.972367] dp lt: CR done [ 7.972466] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 7.972688] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 7.996828] dp lt: CE not done [ 7.997844] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 7.998056] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 7.998242] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 7.998411] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 8.004426] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 8.011261] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 8.017986] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 8.024473] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 8.031468] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 8.031538] dp lt: tx_pu: 0x60 [ 8.037936] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 8.041308] dp lt: CE retry [ 8.049219] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 8.058237] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 8.080832] usb 1-2.3: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 [ 8.081035] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.081238] usb 1-2.3: Product: 4-Port USB 2.0 Hub [ 8.085184] usb 1-2.3: Manufacturer: Generic [ 8.090312] dp lt: CE done [ 8.091127] hub 1-2.3:1.0: USB hub found [ 8.092273] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 8.092322] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 8.097886] hub 1-2.3:1.0: 4 ports detected [ 8.105327] Extcon AUX0(DP): enable [ 8.120138] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 8.125225] Freeing unused kernel memory: 3968K [ 8.127532] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 8.147545] Run /init as init process [ 8.152260] usb 2-3.3: new SuperSpeed Gen 1 USB device number 3 using tegra-xusb [ 8.184625] usb 2-3.3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 [ 8.184859] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.185087] usb 2-3.3: Product: 4-Port USB 3.0 Hub [ 8.185227] usb 2-3.3: Manufacturer: Generic [ 8.194044] hub 2-3.3:1.0: USB hub found [ 8.195516] hub 2-3.3:1.0: 4 ports detected [ 8.204263] Root device found: mmcblk0p1 [ 8.206413] Found dev node: /dev/mmcblk0p1 [ 8.235456] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 8.235650] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 8.247434] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 8.260229] Reserved SVD code 117 [ 8.260305] Reserved SVD code 118 [ 8.269726] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp ▒▒WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ▒▒[ 8.318917] EXT4-fs (mmcblk0p1): 3 orphan inodes deleted [ 8.319068] EXT4-fs (mmcblk0p1): recovery complete [ 8.323717] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.323726] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323732] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323738] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323762] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323768] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323774] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323780] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323786] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323792] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323798] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323804] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323810] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323817] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323823] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323846] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323854] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323860] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323866] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323874] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323880] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323887] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323894] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.323900] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.323907] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.323914] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 8.323921] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323928] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323935] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323942] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323949] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323956] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323963] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323974] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323981] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323987] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323994] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324001] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324008] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324014] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324021] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324028] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324035] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324042] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324049] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324056] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324063] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324073] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.324080] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.324087] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.324094] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.324099] tegradc 15210000.display: mode bw=30729816000 > link bw=25920000000 [ 8.324105] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.324109] tegradc 15210000.display: mode bw=31914888000 > link bw=25920000000 [ 8.324114] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324121] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324129] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324136] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324144] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324161] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 8.324166] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324174] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324182] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324189] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324197] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324204] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324211] tegradc 15210000.display: blank - powerdown [ 8.329175] Rootfs mounted over mmcblk0p1 [ 8.369045] Switching from initrd to actual rootfs [ 8.373771] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 8.373799] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 8.373804] dp lt: state 0 (Reset), pending_lt_evt 0 [ 8.373810] dp lt: link training force disable [ 8.373813] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 8.395886] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 8.395890] Extcon AUX0(DP) disable [ 8.397574] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 8.397740] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 8.398728] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 8.398794] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.398806] tegradc 15210000.display: unblank [ 8.400069] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 8.400261] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 8.400488] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 8.403486] usb 1-2.3.1: new high-speed USB device number 4 using tegra-xusb [ 8.406314] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.417792] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 8.417796] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 8.417800] dp lt: state 0 (Reset), pending_lt_evt 0 [ 8.419926] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 8.419932] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 8.420393] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 8.420399] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 8.420405] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 8.420411] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 8.420416] dp lt: tx_pu: 0x20 [ 8.420927] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 8.444380] dp lt: CR not done [ 8.445347] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445350] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445353] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445355] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445358] dp lt: CR retry [ 8.445361] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 8.445366] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 8.445375] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445380] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445386] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445392] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445396] dp lt: tx_pu: 0x40 [ 8.468365] dp lt: CR done [ 8.468369] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 8.468374] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 8.492843] dp lt: CE not done [ 8.493760] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493763] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493766] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493768] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493776] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493781] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493806] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493820] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493826] dp lt: tx_pu: 0x60 [ 8.494318] dp lt: CE retry [ 8.494322] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 8.494329] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 8.517504] usb 1-2.3.1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 [ 8.517510] usb 1-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.517514] usb 1-2.3.1: Product: 4-Port USB 2.0 Hub [ 8.517518] usb 1-2.3.1: Manufacturer: Generic [ 8.518348] dp lt: CE done [ 8.518353] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 8.518405] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 8.518408] Extcon AUX0(DP): enable [ 8.519274] hub 1-2.3.1:1.0: USB hub found [ 8.520355] hub 1-2.3.1:1.0: 4 ports detected [ 8.535052] tegradc 15210000.display: sync windows ret = 246 [ 8.592175] usb 2-3.3.1: new SuperSpeed Gen 1 USB device number 4 using tegra-xusb [ 9.423763] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.423771] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423806] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423812] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423818] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423824] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423830] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423835] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423841] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423865] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423871] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423876] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423882] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423888] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423894] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423900] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423906] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423911] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423917] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423923] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423946] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423952] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423958] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.423965] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.423971] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.423977] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 9.423984] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.423990] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.423996] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424019] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424026] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424033] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424041] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424047] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424054] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424061] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424068] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424074] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424081] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424087] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424095] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424102] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424108] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424115] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424123] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424130] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424136] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424147] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.424154] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.424161] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.424168] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.424172] tegradc 15210000.display: mode bw=30729816000 > link bw=25920000000 [ 9.424177] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.424180] tegradc 15210000.display: mode bw=31914888000 > link bw=25920000000 [ 9.424186] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424193] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424200] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424209] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424216] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424224] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424231] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424238] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424245] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424253] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424260] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424266] tegradc 15210000.display: blank - powerdown [ 9.458050] usb 2-3.3.1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 [ 9.458057] usb 2-3.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.458061] usb 2-3.3.1: Product: 4-Port USB 3.0 Hub [ 9.458065] usb 2-3.3.1: Manufacturer: Generic [ 9.467870] hub 2-3.3.1:1.0: USB hub found [ 9.468500] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 9.468506] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 9.468511] dp lt: state 0 (Reset), pending_lt_evt 0 [ 9.468516] dp lt: link training force disable [ 9.468519] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 9.469822] hub 2-3.3.1:1.0: 4 ports detected [ 9.490253] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 9.490256] Extcon AUX0(DP) disable [ 9.491990] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 9.492155] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 9.493169] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 9.493249] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.493261] tegradc 15210000.display: unblank [ 9.494581] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 9.494973] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 9.495202] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 9.501380] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.512944] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 9.512949] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 9.512954] dp lt: state 0 (Reset), pending_lt_evt 0 [ 9.515106] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 9.515112] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 9.515576] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 9.515582] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 9.515587] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 9.515593] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 9.515598] dp lt: tx_pu: 0x20 [ 9.516087] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 9.527478] usb 1-2.3.3: new full-speed USB device number 5 using tegra-xusb [ 9.540348] dp lt: CR not done [ 9.541280] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541282] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541285] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541287] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541290] dp lt: CR retry [ 9.541293] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 9.541298] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 9.541306] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541311] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541320] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541342] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541347] dp lt: tx_pu: 0x40 [ 9.564365] dp lt: CR done [ 9.564369] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 9.564374] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 9.588844] dp lt: CE not done [ 9.589752] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589755] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589758] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589760] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589766] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589772] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589777] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589783] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589787] dp lt: tx_pu: 0x60 [ 9.590277] dp lt: CE retry [ 9.590281] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 9.590286] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 9.614319] dp lt: CE done [ 9.614323] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 9.614374] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 9.614377] Extcon AUX0(DP): enable [ 9.629759] usb 1-2.3.3: New USB device found, idVendor=046d, idProduct=c336, bcdDevice= 9.00 [ 9.629764] usb 1-2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.629769] usb 1-2.3.3: Product: Gaming Keyboard G213 [ 9.629772] usb 1-2.3.3: Manufacturer: Logitech [ 9.629775] usb 1-2.3.3: SerialNumber: 085F39523435 [ 9.631029] tegradc 15210000.display: sync windows ret = 246 [ 9.633458] input: Logitech Gaming Keyboard G213 as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.0/0003:046D:C336.0001/input/input1 [ 10.539551] extcon-disp-state external-connection:disp-state: cable 44 state 1 [ 10.539561] Extcon DP: HPD enabled [ 10.549824] hpd: switching from state 2 (Check EDID) to state 4 (Enabled) [ 10.566489] systemd[1]: System time before build time, advancing clock. [ 10.599840] hid-generic 0003:046D:C336.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G213] on usb-3610000.xhci-2.3.3/input0 [ 10.602095] input: Logitech Gaming Keyboard G213 Keyboard as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.1/0003:046D:C336.0002/input/input2 [ 10.650751] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 10.653202] systemd[1]: Detected architecture arm64. [ 10.659752] input: Logitech Gaming Keyboard G213 Consumer Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.1/0003:046D:C336.0002/input/input3 [ 10.660459] hid-generic 0003:046D:C336.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G213] on usb-3610000.xhci-2.3.3/input1 [ 10.693507] systemd[1]: Set hostname to . [ 10.739462] usb 1-2.3.4: new full-speed USB device number 6 using tegra-xusb [ 10.845765] usb 1-2.3.4: New USB device found, idVendor=046d, idProduct=c084, bcdDevice= 7.03 [ 10.845972] usb 1-2.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.846139] usb 1-2.3.4: Product: G102 Prodigy Gaming Mouse [ 10.846260] usb 1-2.3.4: Manufacturer: Logitech [ 10.846358] usb 1-2.3.4: SerialNumber: 0F6D386A3134 [ 10.850236] input: Logitech G102 Prodigy Gaming Mouse as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.0/0003:046D:C084.0003/input/input6 [ 10.850969] hid-generic 0003:046D:C084.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G102 Prodigy Gaming Mouse] on usb-3610000.xhci-2.3.4/input0 [ 10.853256] input: Logitech G102 Prodigy Gaming Mouse Keyboard as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/0003:046D:C084.0004/input/input7 [ 10.911855] input: Logitech G102 Prodigy Gaming Mouse Consumer Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/0003:046D:C084.0004/input/input8 [ 10.912363] input: Logitech G102 Prodigy Gaming Mouse System Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/0003:046D:C084.0004/input/input9 [ 10.912981] hid-generic 0003:046D:C084.0004: input,hiddev97,hidraw3: USB HID v1.11 Keyboard [Logitech G102 Prodigy Gaming Mouse] on usb-3610000.xhci-2.3.4/input1 [ 11.182656] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 11.182964] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 11.187306] systemd[1]: Created slice system-modprobe.slice. [ 11.189176] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 11.190700] systemd[1]: Created slice User and Session Slice. [ 11.191531] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 11.193163] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 11.193837] systemd[1]: Reached target User and Group Name Lookups. [ 11.194225] systemd[1]: Reached target Slices. [ 11.194615] systemd[1]: Reached target Swap. [ 11.195942] systemd[1]: Listening on RPCbind Server Activation Socket. [ 11.196755] systemd[1]: Listening on Syslog Socket. [ 11.197557] systemd[1]: Listening on fsck to fsckd communication Socket. [ 11.198135] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 11.199595] systemd[1]: Listening on Journal Audit Socket. [ 11.200451] systemd[1]: Listening on Journal Socket (/dev/log). [ 11.201452] systemd[1]: Listening on Journal Socket. [ 11.204496] systemd[1]: Listening on udev Control Socket. [ 11.209415] systemd[1]: Listening on udev Kernel Socket. [ 11.220044] systemd[1]: Mounting Huge Pages File System... [ 11.225461] systemd[1]: Mounting POSIX Message Queue File System... [ 11.231062] systemd[1]: Mounting RPC Pipe File System... [ 11.237312] systemd[1]: Mounting Kernel Debug File System... [ 11.242942] systemd[1]: Mounting Kernel Trace File System... [ 11.250107] systemd[1]: Starting Journal Service... [ 11.257083] systemd[1]: Starting Set the console keyboard layout... [ 11.262615] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 11.263339] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 11.275434] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 11.282754] systemd[1]: Started Nameserver information manager. [ 11.284965] systemd[1]: Reached target Network (Pre). [ 11.292466] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 11.298534] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 11.304615] systemd[1]: Starting Load Kernel Modules... [ 11.318158] systemd[1]: Starting Remount Root and Kernel File Systems... [ 11.325459] systemd[1]: Starting udev Coldplug all Devices... [ 11.333424] systemd[1]: Mounted Huge Pages File System. [ 11.334431] systemd[1]: Mounted POSIX Message Queue File System. [ 11.337029] systemd[1]: Mounted RPC Pipe File System. [ 11.342590] systemd[1]: Mounted Kernel Debug File System. [ 11.347555] systemd[1]: Mounted Kernel Trace File System. [ 11.349887] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 11.353831] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 11.365176] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 11.370628] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 11.373480] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 11.373500] nvmap_page_pool_init: Total RAM pages: 1754838 [ 11.373504] nvmap_page_pool_init: nvmap page pool size: 219354 pages (856 MB) [ 11.374151] nvmap_background_zero_thread: PP zeroing thread starting. [ 11.374352] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 11.374532] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 11.374541] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 11.433978] systemd[1]: nvfb-udev.service: Succeeded. [ 11.440109] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 11.450630] systemd[1]: Finished Remount Root and Kernel File Systems. [ 11.461958] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 11.462457] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.470206] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 11.470206] [ 11.474131] systemd[1]: Starting Load/Save Random Seed... [ 11.493622] systemd[1]: Starting Create System Users... [ 11.507185] systemd[1]: Finished Load Kernel Modules. [ 11.508993] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 11.514583] systemd[1]: Mounting Kernel Configuration File System... [ 11.519322] systemd[1]: Started OP-TEE Client Supplicant. [ 11.524476] systemd[1]: Starting Apply Kernel Variables... [ 11.531871] systemd[1]: Finished Set the console keyboard layout. [ 11.538735] systemd[1]: Finished Load/Save Random Seed. [ 11.540042] systemd[1]: Mounted Kernel Configuration File System. [ 11.550077] systemd[1]: Finished Create System Users. [ 11.555052] systemd[1]: Starting Create Static Device Nodes in /dev... [ 12.882566] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 12.888266] imx219 9-0010: board setup failed [ 12.888497] imx219: probe of 9-0010 failed with error -121 [ 12.916929] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 12.922508] imx219 10-0010: board setup failed [ 12.922735] imx219: probe of 10-0010 failed with error -121 [ 13.941358] using random self ethernet address [ 13.941493] using random host ethernet address [ 14.195752] 1 fixed-partitions partitions found on MTD device spi6.0 [ 14.195944] Creating 1 MTD partitions on "spi6.0": [ 14.196068] 0x000000000000-0x000002000000 : "Whole_flash0" [ 15.355012] using random self ethernet address [ 15.355158] using random host ethernet address [ 16.137082] IRQ237: set affinity failed(-22). [ 16.137199] IRQ238: set affinity failed(-22). [ 16.137291] IRQ239: set affinity failed(-22). [ 16.137381] IRQ240: set affinity failed(-22). [ 16.137470] IRQ241: set affinity failed(-22). [ 16.137560] IRQ242: set affinity failed(-22). [ 16.137665] IRQ243: set affinity failed(-22). [ 16.137749] IRQ244: set affinity failed(-22). [ 16.137832] IRQ245: set affinity failed(-22). [ 16.137918] IRQ246: set affinity failed(-22). [ 16.139508] CPU4: shutdown [ 16.220682] CPU5: shutdown Ubuntu 20.04.4 LTS ubuntu ttyTCU0 ubuntu login: [ 28.541106] nvidia: loading out-of-tree module taints kernel. [ 86.624542] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [ 86.626158] sd 0:0:0:0: [sda] 121208832 512-byte logical blocks: (62.1 GB/57.8 GiB) [ 86.626800] sd 0:0:0:0: [sda] Write Protect is off [ 86.627329] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 86.891809] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 179.296072] Trying to unregister non-registered hwtime source ▒▒WARNING @ [platform/drivers/mailbox/mail_routing_layer/mail_routing_layer.c]: mail rx timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout ▒▒ [0000.024] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.032] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.043] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.055] I> Ram repair fuse : 0x0 [0000.058] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.084] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.093] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 41500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ▒▒▒▒main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ▒▒ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.057] E> I2C: slave not found in slaves. [0002.058] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.059] E> I2C_DEV: Failed to send register address 0x00000000. [0002.060] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. [0002.061] E> eeprom: Failed to read I2C slave device [0002.064] I> Failed to read CVB eeprom data @ AE [0002.068] I> Retrying CVB eeprom read @ AC ... [0002.073] E> I2C: slave not found in slaves. [0002.077] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0002.085] E> I2C_DEV: Failed to send register address 0x00000000. [0002.091] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0002.100] E> eeprom: Failed to read I2C slave device [0002.104] I> Failed to read CVB eeprom data @ AC [0002.366] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.367] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.367] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.368] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.368] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.369] I> dram_block larger than 80000000 [0002.371] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.382] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.386] I> found decompressor handler: lz4 [0002.613] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.615] I> Setting EKB blob info to OPTEE dtb finished. ▒▒NOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ▒▒ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ▒▒▒▒clk_early initialized ▒▒I/TC:▒▒mail_early initialized ▒▒ N▒▒fuse initialized hwwdt initialized ▒▒on-s▒▒t194_ec_get_ec_list: found 45 ecs ▒▒ecure exter▒▒ec initialized vmon_setup_monitors: found 3 monitors vmon initialized ▒▒nal▒▒adc initialized ▒▒ ▒▒fmon_populate_monitors: found 73 monitors ▒▒DT found ▒▒fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ▒▒I/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu ▒▒clk_dt_late initialized ▒▒A▒▒noc_late initialized ▒▒u▒▒pm_post initialized dbells initialized ▒▒g 1▒▒dmce initialized ▒▒1▒▒cvc initialized ▒▒ 03:23:20 UT▒▒avfs_clk_mach_post initialized ▒▒C 20▒▒avfs_clk_platform_post initialized ▒▒22 ▒▒cvc_late initialized regulator_post initialized ▒▒aarc▒▒rm initialized console_late initialized clk_dt_post initialized mc_reg initialized ▒▒h64 I/TC: WARNI▒▒pg_post initialized profile initialized fuse_late initialized extras_post initializeentering main console loop ] d bpmp: init complete ▒▒NG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ▒▒ [0003.233] I> Welcome to NVDisp-Init [0003.233] I> NVDisp-Init version: t194-f9ecfedc [0003.234] I> CPU-BL Params @ 0xca020000 [0003.234] I> 0) Base:0x00000000 Size:0x00000000 [0003.234] I> 1) Base:0xc8300000 Size:0x00100000 [0003.235] I> 2) Base:0xc9800000 Size:0x00200000 [0003.235] I> 3) Base:0xc8600000 Size:0x00200000 [0003.238] I> 4) Base:0xc8200000 Size:0x00100000 [0003.242] I> 5) Base:0xc8100000 Size:0x00100000 [0003.246] I> 6) Base:0xc9400000 Size:0x00400000 [0003.251] I> 7) Base:0xc9000000 Size:0x00400000 [0003.255] I> 8) Base:0xc8000000 Size:0x00100000 [0003.260] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.264] I> 10) Base:0xca800000 Size:0x00800000 [0003.269] I> 11) Base:0x40000000 Size:0x00040000 [0003.273] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.278] I> 13) Base:0x40046000 Size:0x00002000 [0003.282] I> 14) Base:0x40048000 Size:0x00002000 [0003.287] I> 15) Base:0xaf000000 Size:0x00004000 [0003.291] I> 16) Base:0x4004a000 Size:0x00002000 [0003.296] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.300] I> 18) Base:0x4004c000 Size:0x00002000 [0003.305] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.309] I> 20) Base:0x4004e000 Size:0x00002000 [0003.313] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.318] I> 22) Base:0x00000000 Size:0x00000000 [0003.322] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.327] I> 24) Base:0xcc000000 Size:0x02000000 [0003.331] I> 25) Base:0x40050000 Size:0x00002000 [0003.336] I> 26) Base:0x40040000 Size:0x00006000 [0003.340] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.345] I> 28) Base:0xc8400000 Size:0x00200000 [0003.349] I> 29) Base:0xc8800000 Size:0x00400000 [0003.354] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.358] I> 31) Base:0x00000000 Size:0x00000000 [0003.363] I> 32) Base:0xf8000000 Size:0x08000000 [0003.367] I> 33) Base:0xce000000 Size:0x2a000000 [0003.371] I> 34) Base:0xcb000000 Size:0x01000000 [0003.376] I> 35) Base:0xae000000 Size:0x01000000 [0003.380] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.385] I> 37) Base:0xca000000 Size:0x00800000 [0003.389] I> 38) Base:0x80000000 Size:0x20000000 [0003.394] I> 39) Base:0xb0000000 Size:0x08000000 [0003.398] I> 40) Base:0x00000000 Size:0x00000000 [0003.403] I> 41) Base:0x00000000 Size:0x00000000 [0003.407] I> 42) Base:0x00000000 Size:0x00000000 [0003.412] I> 43) Base:0x00000000 Size:0x00000000 [0003.416] I> 44) Base:0x00000000 Size:0x00000000 [0003.421] I> 45) Base:0x00000000 Size:0x00000000 [0003.425] GIC-SPI Target CPU: 0 [0003.428] Interrupts Init done [0003.431] calling constructors [0003.434] initializing heap [0003.436] I> Heap: [0xa0960000 ... 0xadf00000] [0003.441] initializing threads [0003.444] initializing timers [0003.446] creating bootstrap completion thread [0003.451] top of bootstrap2() [0003.453] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.458] initializing platform [0003.461] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.466] W> device prod register failed [0003.470] I> Bl_dtb @0xadf00000 [0003.473] I> gpio framework initialized [0003.484] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.489] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.495] I> fixed regulator driver initialized [0003.511] I> register 'maxim' power off handle [0003.513] I> virtual i2c enabled [0003.513] I> registered 'maxim,max20024' pmic [0003.514] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.515] I> Boot-device: QSPI [0003.517] I> Boot_device: QSPI_FLASH instance: 0 [0003.522] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.533] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.540] I> QSPI source rate = 204000 Khz [0003.543] I> Requested rate for QSPI clock = 34000 Khz [0003.548] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.553] I> tx_clk_tap_delay : 0 [0003.556] I> rx_clk_tap_delay : 16 [0003.559] I> QSPI Flash Size = 32 MB [0003.567] I> Qspi initialized successfully [0003.567] I> qspi flash-0 params source = boot args [0003.572] W> No board IDs available [0003.574] E> Failed to get board id info! [0003.580] I> sdmmc-3 params source = safe params [0003.587] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.588] W> Cannot find any partition table for 00000003 [0003.593] E> Failed to publish 00000003 [0003.598] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.617] I> regulator 'vdd-hdmi-5v0' already enabled [0003.623] I> regulator 'vdd-hdmi-5v0' already enabled [0003.624] E> tegrabl_display_init_regulator: hdmi cable is not connected [0003.624] E> tegrabl_display_get_pdata, failed to parse dtb settings [0003.631] E> invalid display type [0003.632] E> cannot find any other nvdisp nodes [0003.633] E> no valid display unit config found in dtb [0003.640] W> display init failed [0003.641] initializing target [0003.643] calling apps_init() [0003.646] starting app kernel_boot_app [0003.650] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) ▒▒ [0000.024] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.055] I> Ram repair fuse : 0x0 [0000.058] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x0, rst_level: 0x0 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.107] I> Temperature = 37000 [0000.110] W> Skipping boost for clk: BPMP_CPU_NIC [0000.115] W> Skipping boost for clk: BPMP_APB [0000.119] W> Skipping boost for clk: AXI_CBB [0000.123] W> Skipping boost for clk: AON_CPU_NIC [0000.127] W> Skipping boost for clk: CAN1 [0000.131] W> Skipping boost for clk: CAN2 [0000.135] I> Boot-device: QSPI (instance: 0) [0000.139] I> Qspi flash params source = mb1bct [0000.143] I> Qspi clock source : pllc_out0 [0000.147] I> Qspi-0 reinitialized [0000.150] I> Qspi flash params source = mb1bct [0000.163] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.170] W> Thermal config not found in BCT [0000.178] W> MEMIO rail config not found in BCT [0000.188] I> Qspi flash params source = mb1bct [0000.201] I> Qspi flash params source = mb1bct [0000.235] I> Qspi flash params source = mb1bct [0000.799] I> Qspi flash params source = mb1bct [0000.816] I> Qspi flash params source = mb1bct [0000.855] W> Platform config not found in BCT [0000.882] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ▒▒▒▒main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ▒▒ [0000.917] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.918] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.918] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.919] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.925] W> device prod register failed [0000.928] I> gpio framework initialized [0000.932] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.939] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.947] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.956] I> qspi flash-0 params source = boot args [0000.961] I> QSPI-0l initialized successfully [0000.965] I> sdmmc-3 params source = safe params [0001.396] I> sdmmc DDR50 mode [0001.414] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.431] W> Cannot find any partition table for 00000003 [0001.432] > PARTITION_MANAGER: Failed to publish partition. [0001.448] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.449] I> Active Boot chain : 0 [0002.120] I> Relocating BR-BCT [0002.121] > DEVICE_PROD: device prod is not initialized. [0002.147] E> I2C: slave not found in slaves. [0002.148] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.149] E> I2C_DEV: Failed to send register address 0x00000000. [0002.150] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. [0002.151] E> eeprom: Failed to read I2C slave device [0002.154] I> Failed to read CVB eeprom data @ AE [0002.158] I> Retrying CVB eeprom read @ AC ... [0002.163] E> I2C: slave not found in slaves. [0002.167] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0002.174] E> I2C_DEV: Failed to send register address 0x00000000. [0002.180] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0002.189] E> eeprom: Failed to read I2C slave device [0002.194] I> Failed to read CVB eeprom data @ AC [0002.456] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.456] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.457] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.457] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.458] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.458] I> dram_block larger than 80000000 [0002.461] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.472] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.475] I> found decompressor handler: lz4 [0002.703] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.704] I> Setting EKB blob info to OPTEE dtb finished. ▒▒NOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ▒▒ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ▒▒I▒▒clk_early initialized ▒▒/TC: ▒▒mail_early initialized ▒▒No▒▒fuse initialized hwwdt initialized ▒▒n-se▒▒t194_ec_get_ec_list: found 45 ecs ▒▒cure extern▒▒ec initialized ▒▒a▒▒vmon_setup_monitors: found 3 monitors vmon initialized ▒▒l D▒▒adc initialized fmon_populate_monitors: found 73 monitors ▒▒T found ▒▒fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ▒▒I/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug▒▒clk_dt_late initialized noc_late initialized ▒▒ ▒▒pm_post initialized dbells initialized ▒▒11 ▒▒dmce initialized ▒▒0▒▒cvc initialized ▒▒3:23:20 UTC ▒▒avfs_clk_mach_post initialized ▒▒2022▒▒avfs_clk_platform_post initialized ▒▒ aa▒▒cvc_late initialized regulator_post initialized ▒▒rch6▒▒rm initialized console_late initialized clk_dt_post initialized mc_reg initialized ▒▒4 I/TC: WARNIN▒▒pg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ▒▒G: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ▒▒ [0003.323] I> Welcome to NVDisp-Init [0003.323] I> NVDisp-Init version: t194-f9ecfedc [0003.323] I> CPU-BL Params @ 0xca020000 [0003.324] I> 0) Base:0x00000000 Size:0x00000000 [0003.324] I> 1) Base:0xc8300000 Size:0x00100000 [0003.324] I> 2) Base:0xc9800000 Size:0x00200000 [0003.325] I> 3) Base:0xc8600000 Size:0x00200000 [0003.327] I> 4) Base:0xc8200000 Size:0x00100000 [0003.332] I> 5) Base:0xc8100000 Size:0x00100000 [0003.336] I> 6) Base:0xc9400000 Size:0x00400000 [0003.341] I> 7) Base:0xc9000000 Size:0x00400000 [0003.345] I> 8) Base:0xc8000000 Size:0x00100000 [0003.350] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.354] I> 10) Base:0xca800000 Size:0x00800000 [0003.358] I> 11) Base:0x40000000 Size:0x00040000 [0003.363] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.367] I> 13) Base:0x40046000 Size:0x00002000 [0003.372] I> 14) Base:0x40048000 Size:0x00002000 [0003.376] I> 15) Base:0xaf000000 Size:0x00004000 [0003.381] I> 16) Base:0x4004a000 Size:0x00002000 [0003.385] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.390] I> 18) Base:0x4004c000 Size:0x00002000 [0003.394] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.399] I> 20) Base:0x4004e000 Size:0x00002000 [0003.403] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.408] I> 22) Base:0x00000000 Size:0x00000000 [0003.412] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.416] I> 24) Base:0xcc000000 Size:0x02000000 [0003.421] I> 25) Base:0x40050000 Size:0x00002000 [0003.425] I> 26) Base:0x40040000 Size:0x00006000 [0003.430] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.434] I> 28) Base:0xc8400000 Size:0x00200000 [0003.439] I> 29) Base:0xc8800000 Size:0x00400000 [0003.443] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.448] I> 31) Base:0x00000000 Size:0x00000000 [0003.452] I> 32) Base:0xf8000000 Size:0x08000000 [0003.457] I> 33) Base:0xce000000 Size:0x2a000000 [0003.461] I> 34) Base:0xcb000000 Size:0x01000000 [0003.466] I> 35) Base:0xae000000 Size:0x01000000 [0003.470] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.475] I> 37) Base:0xca000000 Size:0x00800000 [0003.479] I> 38) Base:0x80000000 Size:0x20000000 [0003.483] I> 39) Base:0xb0000000 Size:0x08000000 [0003.488] I> 40) Base:0x00000000 Size:0x00000000 [0003.492] I> 41) Base:0x00000000 Size:0x00000000 [0003.497] I> 42) Base:0x00000000 Size:0x00000000 [0003.501] I> 43) Base:0x00000000 Size:0x00000000 [0003.506] I> 44) Base:0x00000000 Size:0x00000000 [0003.510] I> 45) Base:0x00000000 Size:0x00000000 [0003.515] GIC-SPI Target CPU: 0 [0003.518] Interrupts Init done [0003.521] calling constructors [0003.523] initializing heap [0003.526] I> Heap: [0xa0960000 ... 0xadf00000] [0003.530] initializing threads [0003.533] initializing timers [0003.536] creating bootstrap completion thread [0003.540] top of bootstrap2() [0003.543] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.548] initializing platform [0003.551] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.556] W> device prod register failed [0003.560] I> Bl_dtb @0xadf00000 [0003.563] I> gpio framework initialized [0003.574] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.579] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.586] I> fixed regulator driver initialized [0003.601] I> register 'maxim' power off handle [0003.603] I> virtual i2c enabled [0003.604] I> registered 'maxim,max20024' pmic [0003.604] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.604] I> Boot-device: QSPI [0003.607] I> Boot_device: QSPI_FLASH instance: 0 [0003.612] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.622] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.629] I> QSPI source rate = 204000 Khz [0003.633] I> Requested rate for QSPI clock = 34000 Khz [0003.638] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.643] I> tx_clk_tap_delay : 0 [0003.645] I> rx_clk_tap_delay : 16 [0003.649] I> QSPI Flash Size = 32 MB [0003.657] I> Qspi initialized successfully [0003.657] I> qspi flash-0 params source = boot args [0003.661] W> No board IDs available [0003.664] E> Failed to get board id info! [0003.670] I> sdmmc-3 params source = safe params [0003.677] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.679] W> Cannot find any partition table for 00000003 [0003.683] E> Failed to publish 00000003 [0003.692] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.711] I> regulator 'vdd-hdmi-5v0' already enabled [0003.718] I> regulator 'vdd-hdmi-5v0' already enabled [0003.718] E> tegrabl_display_init_regulator: hdmi cable is not connected [0003.719] E> tegrabl_display_get_pdata, failed to parse dtb settings [0003.726] E> invalid display type [0003.728] E> cannot find any other nvdisp nodes [0003.728] E> no valid display unit config found in dtb [0003.731] W> display init failed [0003.731] initializing target [0003.733] calling apps_init() [0003.736] starting app kernel_boot_app [0003.739] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) Press ESCAPE for boot options ** WARNING: Test Key is used. ** . L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ▒▒I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ▒▒[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x277587698 SMBIOS=0xc7db0000 SMBIOS 3.0=0x258a30000 MEMATTR=0x2593cf018 ESRT=0x25943fc98 RNG=0x27c595918 MEMRESERVE=0x2593d0f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025943fc98 to 0x000000025943fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025852ffff] [ 0.000000] node 0: [mem 0x0000000258530000-0x000000025855ffff] [ 0.000000] node 0: [mem 0x0000000258560000-0x00000002586c5fff] [ 0.000000] node 0: [mem 0x00000002586c6000-0x000000025888dfff] [ 0.000000] node 0: [mem 0x000000025888e000-0x0000000258a1ffff] [ 0.000000] node 0: [mem 0x0000000258a20000-0x0000000258a3ffff] [ 0.000000] node 0: [mem 0x0000000258a40000-0x00000002591fffff] [ 0.000000] node 0: [mem 0x0000000259200000-0x000000025938ffff] [ 0.000000] node 0: [mem 0x0000000259390000-0x000000025943ffff] [ 0.000000] node 0: [mem 0x0000000259440000-0x00000002595bffff] [ 0.000000] node 0: [mem 0x00000002595c0000-0x00000002595cffff] [ 0.000000] node 0: [mem 0x00000002595d0000-0x000000025969ffff] [ 0.000000] node 0: [mem 0x00000002596a0000-0x00000002596affff] [ 0.000000] node 0: [mem 0x00000002596b0000-0x00000002596fffff] [ 0.000000] node 0: [mem 0x0000000259700000-0x000000025977ffff] [ 0.000000] node 0: [mem 0x0000000259780000-0x0000000259a9ffff] [ 0.000000] node 0: [mem 0x0000000259aa0000-0x0000000259abffff] [ 0.000000] node 0: [mem 0x0000000259ac0000-0x0000000259b2ffff] [ 0.000000] node 0: [mem 0x0000000259b30000-0x0000000259fbffff] [ 0.000000] node 0: [mem 0x0000000259fc0000-0x000000025a00ffff] [ 0.000000] node 0: [mem 0x000000025a010000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839269 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 nv-auto-config [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6941652K/7473856K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 466668K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000847] Console: colour dummy device 80x25 [ 0.002264] printk: console [tty0] enabled [ 0.002325] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002361] pid_max: default: 32768 minimum: 301 [ 0.002580] LSM: Security Framework initializing [ 0.002642] Yama: becoming mindful. [ 0.002688] SELinux: Initializing. [ 0.002872] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002926] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006523] rcu: Hierarchical SRCU implementation. [ 0.006768] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007695] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007760] DTB Build time: Aug 10 2022 20:31:49 [ 0.011221] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011517] Remapping and enabling EFI services. [ 0.013094] smp: Bringing up secondary CPUs ... [ 0.042580] Detected PIPT I-cache on CPU1 [ 0.042660] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072179] Detected PIPT I-cache on CPU2 [ 0.072328] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101940] Detected PIPT I-cache on CPU3 [ 0.102082] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131766] Detected PIPT I-cache on CPU4 [ 0.131920] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161546] Detected PIPT I-cache on CPU5 [ 0.161638] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162856] smp: Brought up 1 node, 6 CPUs [ 0.163069] SMP: Total of 6 processors activated. [ 0.163107] CPU features: detected: Privileged Access Never [ 0.163128] CPU features: detected: LSE atomic instructions [ 0.163142] CPU features: detected: User Access Override [ 0.163156] CPU features: detected: 32-bit EL0 Support [ 0.163169] CPU features: detected: RAS Extension Support [ 0.163181] CPU features: detected: CRC32 instructions [ 0.163194] CPU features: detected: 32-bit EL1 Support [ 0.236246] CPU: All CPU(s) started at EL2 [ 0.242061] devtmpfs: initialized [ 0.288578] Registered cp15_barrier emulation handler [ 0.288687] Registered setend emulation handler [ 0.288711] KASLR enabled [ 0.288929] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288954] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290320] pinctrl core: initialized pinctrl subsystem [ 0.291470] SMBIOS 3.0.0 present. [ 0.291498] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292117] NET: Registered protocol family 16 [ 0.294092] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294648] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295354] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295412] audit: initializing netlink subsys (disabled) [ 0.295699] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296095] thermal_sys: Registered thermal governor 'step_wise' [ 0.296101] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296116] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298424] cpuidle: using governor menu [ 0.298820] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299254] ASID allocator initialised with 32768 entries [ 0.299483] Serial: AMBA PL011 UART driver [ 0.302533] Tegra reboot handler registered. [ 0.372647] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372750] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.372956] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373014] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373128] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373167] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373281] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373323] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.373476] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.373517] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375774] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375807] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375834] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375859] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375888] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375913] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375950] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375979] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376026] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376050] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376089] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376112] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376152] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376175] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376197] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376220] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.376242] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376326] mc-err: mcerr ops are set to t19x [ 0.388172] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388193] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.388206] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.388218] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.394143] ACPI: Interpreter disabled. [ 0.395258] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.396404] iommu: Default domain type: Translated [ 0.396468] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396849] SCSI subsystem initialized [ 0.396996] usbcore: registered new interface driver usbfs [ 0.397035] usbcore: registered new interface driver hub [ 0.397071] usbcore: registered new device driver usb [ 0.397438] mc: Linux media interface: v0.10 [ 0.397464] videodev: Linux video capture interface: v2.00 [ 0.397785] pps_core: LinuxPPS API ver. 1 registered [ 0.397797] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397819] PTP clock support registered [ 0.398016] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.398353] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398465] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.399089] Registered efivars operations [ 0.399500] FPGA manager framework [ 0.399594] Advanced Linux Sound Architecture Driver Initialized. [ 0.400160] Bluetooth: Core ver 2.22 [ 0.400206] NET: Registered protocol family 31 [ 0.400218] Bluetooth: HCI device and connection manager initialized [ 0.400234] Bluetooth: HCI socket layer initialized [ 0.400249] Bluetooth: L2CAP socket layer initialized [ 0.400271] Bluetooth: SCO socket layer initialized [ 0.402478] camchar: rtcpu character device driver loaded [ 0.403426] clocksource: Switched to clocksource arch_sys_counter [ 0.818088] VFS: Disk quotas dquot_6.6.0 [ 0.818178] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.818642] pnp: PnP ACPI: disabled [ 0.832897] la/ptsa driver initialized. [ 0.833048] NET: Registered protocol family 2 [ 0.833262] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.840890] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.841043] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.841410] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.842033] TCP: Hash tables configured (established 65536 bind 65536) [ 0.842165] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.842291] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.842565] NET: Registered protocol family 1 [ 0.843299] RPC: Registered named UNIX socket transport module. [ 0.843327] RPC: Registered udp transport module. [ 0.843341] RPC: Registered tcp transport module. [ 0.843353] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.843394] PCI: CLS 0 bytes, default 64 [ 0.843781] Trying to unpack rootfs image as initramfs... [ 1.115756] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.118935] Freeing initrd memory: 8196K [ 1.123640] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.123706] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.123761] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.124085] kvm [1]: IPA Size Limit: 40 bits [ 1.124542] kvm [1]: vgic interrupt IRQ9 [ 1.125032] kvm [1]: VHE mode initialized successfully [ 1.126591] Initialise system trusted keyrings [ 1.126891] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.133365] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.134170] NFS: Registering the id_resolver key type [ 1.134216] Key type id_resolver registered [ 1.134230] Key type id_legacy registered [ 1.134342] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.134369] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.134404] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.144045] NET: Registered protocol family 38 [ 1.144068] Key type asymmetric registered [ 1.144083] Asymmetric key parser 'x509' registered [ 1.144130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.144395] io scheduler mq-deadline registered [ 1.144414] io scheduler kyber registered [ 1.150288] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.153329] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.153413] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.153482] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.153557] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.153625] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.159164] scrncapt: init (heads:4 wins:6 planes:4) [ 1.159391] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.160420] EINJ: ACPI disabled. [ 1.163820] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.163845] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 1.163860] tegra-pmc: ### PMC reset level: L0 [ 1.163873] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.163918] tegra-pmc: PMC Prod config success [ 1.169145] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.186498] random: fast init done [ 2.738750] printk: console [ttyTCU0] enabled [ 2.744594] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.749104] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.753762] arm-smmu 10000000.iommu: stage 1 translation [ 2.759450] arm-smmu 10000000.iommu: stage 2 translation [ 2.764669] arm-smmu 10000000.iommu: nested translation [ 2.770282] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.777218] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.788124] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.790373] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.797215] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.804681] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.809997] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.814729] arm-smmu 12000000.iommu: stage 1 translation [ 2.820230] arm-smmu 12000000.iommu: stage 2 translation [ 2.825914] arm-smmu 12000000.iommu: nested translation [ 2.831082] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.838260] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.848982] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.851361] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.857946] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.865713] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.875127] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.878357] tegra_profiler: auth: init [ 2.882891] THERMAL EST: found 3 subdevs [ 2.886036] THERMAL EST num_resources: 0 [ 2.890140] [THERMAL EST subdev 0] [ 2.893462] [THERMAL EST subdev 1] [ 2.896616] [THERMAL EST subdev 2] [ 2.900122] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.906560] THERMAL EST: thz register success. [ 2.910823] THERMAL EST: end of probe, return err: 0 [ 2.915964] nvsciipc: loaded module [ 2.923155] tun: Universal TUN/TAP device driver, 1.6 [ 2.925445] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.931939] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.937452] e1000e: Intel(R) PRO/1000 Network Driver [ 2.942375] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.948202] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.953749] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.959897] PPP generic driver version 2.4.2 [ 2.963925] PPP BSD Compression module registered [ 2.968470] PPP Deflate Compression module registered [ 2.973721] PPP MPPE Compression module registered [ 2.979001] usbcore: registered new interface driver r8152 [ 2.984248] usbcore: registered new interface driver asix [ 2.989839] usbcore: registered new interface driver ax88179_178a [ 2.995703] usbcore: registered new interface driver cdc_ether [ 3.001644] usbcore: registered new interface driver net1080 [ 3.007267] usbcore: registered new interface driver cdc_subset [ 3.013564] usbcore: registered new interface driver zaurus [ 3.019281] usbcore: registered new interface driver cdc_ncm [ 3.024916] usbcore: registered new interface driver aqc111 [ 3.030385] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.036651] ohci-pci: OHCI PCI platform driver [ 3.040702] ohci-platform: OHCI generic platform driver [ 3.046919] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.052713] usbcore: registered new interface driver uas [ 3.057241] usbcore: registered new interface driver usb-storage [ 3.063128] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.069332] mousedev: PS/2 mouse device common for all mice [ 3.074402] usbcore: registered new interface driver xpad [ 3.082377] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.084898] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:21 UTC (21) [ 3.092927] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.099295] i2c /dev entries driver [ 3.102595] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.108496] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.113941] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.119119] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.124409] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.130125] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.135578] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.149701] device-mapper: uevent: version 1.0.3 [ 3.150141] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.156353] cpuidle: Initializing cpuidle driver [ 3.160084] sdhci: Secure Digital Host Controller Interface driver [ 3.164720] sdhci: Copyright(c) Pierre Ossman [ 3.168565] Synopsys Designware Multimedia Card Interface Driver [ 3.174774] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.181017] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.181826] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.194307] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.217094] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.227455] vdd-1v0: supplied by regulator-dummy [ 3.233267] vdd-1v8-hs: supplied by regulator-dummy [ 3.238350] vdd-1v8-ls: supplied by regulator-dummy [ 3.243603] vdd-1v8-ao: supplied by regulator-dummy [ 3.247830] vddio-ddr-1v1: supplied by regulator-dummy [ 3.252861] vdd-rtc: supplied by regulator-dummy [ 3.254853] spmic-ldo1: supplied by regulator-dummy [ 3.256656] vdd-ao-3v3: supplied by regulator-dummy [ 3.263463] vddio-emmc-3v3: supplied by regulator-dummy [ 3.269988] spmic-ldo4: supplied by regulator-dummy [ 3.271789] vdd-usb-3v3: supplied by regulator-dummy [ 3.278614] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.285303] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.291691] spmic-ldo8: supplied by vdd-1v8-ls [ 3.293722] gpio-510 (gpio_default): hogged as output/high [ 3.295670] gpio-511 (gpio_default): hogged as output/high [ 3.298548] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.434376] max77686-rtc max77620-rtc: registered as rtc0 [ 3.435675] max77620-power max20024-power: Event recorder REG_NVERC : 0x44 [ 3.436035] max77620 4-003c: max77620 probe successful ▒▒rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ▒▒[ 4.252147] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.253490] hid: raw HID events driver (C) Jiri Kosina [ 4.254305] usbcore: registered new interface driver usbhid [ 4.254477] usbhid: USB HID core driver [ 4.256654] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.258010] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ▒▒[ 22.623105] Camera-FW on t194-rce-safe started TCU early console enabled. [ 22.697213] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.916 ms) ▒▒[ 4.342369] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.342925] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.344063] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.344698] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.346291] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.346953] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.347725] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.348885] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.349151] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.351495] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.358277] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.364809] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.369934] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.375981] denver_knobs_init:MTS_VERSION:55637613 [ 4.387846] t19x_cache tegra-cache: probed [ 4.390836] optee: probing for conduit method. [ 4.391739] optee: revision 3.16 (65cc2218) [ 4.392690] optee: dynamic shared memory is enabled [ 4.396894] optee: initialized driver [ 4.403648] nvpmodel: initialized successfully [ 4.404829] tegra_hv: get_hvd: not initialized yet [ 4.409419] user_ivc_mempool: hypervisor not present [ 4.415198] usbcore: registered new interface driver snd-usb-audio [ 4.422008] u32 classifier [ 4.422923] input device check on [ 4.426699] Actions configured [ 4.430514] Initializing XFRM netlink socket [ 4.435322] NET: Registered protocol family 10 [ 4.441309] Segment Routing with IPv6 [ 4.442748] NET: Registered protocol family 17 [ 4.447048] NET: Registered protocol family 15 [ 4.451256] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.464622] Bluetooth: RFCOMM socket layer initialized [ 4.469453] Bluetooth: RFCOMM ver 1.11 [ 4.473605] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.479257] Bluetooth: HIDP socket layer initialized [ 4.485284] 9pnet: Installing 9P2000 support [ 4.488912] Key type dns_resolver registered [ 4.493988] registered taskstats version 1 [ 4.497339] Loading compiled-in X.509 certificates [ 4.510681] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.512933] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.523255] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.525064] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.533849] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.541960] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 5.660160] tegra194-pcie 14160000.pcie: Phy link never came up [ 5.660631] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 5.660829] pci_bus 0004:00: root bus resource [bus 00-ff] [ 5.660974] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 5.661306] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 5.661535] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 5.661937] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 5.662505] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 5.684471] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 5.684727] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.686407] pcieport 0004:00:00.0: Adding to iommu group 6 [ 5.687910] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 5.689398] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 5.690988] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 5.691959] pci 0004:00:00.0: Removing from iommu group 6 [ 5.692501] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 5.696509] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 5.702053] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 5.702395] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 5.702680] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 5.705556] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.819546] tegra194-pcie 141a0000.pcie: Link up [ 5.822354] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.822578] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.822733] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.823003] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.823196] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.823595] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.824012] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.835626] pci 0005:01:00.0: [12d8:c008] type 01 class 0x060400 [ 5.836098] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.837659] pci 0005:01:00.0: PME# supported from D0 D3hot D3cold [ 5.846082] pci 0005:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.848516] pci 0005:02:04.0: [12d8:c008] type 01 class 0x060400 [ 5.850331] pci 0005:02:04.0: PME# supported from D0 D3hot D3cold [ 5.852475] pci 0005:02:05.0: [12d8:c008] type 01 class 0x060400 [ 5.854294] pci 0005:02:05.0: PME# supported from D0 D3hot D3cold [ 5.856427] pci 0005:02:06.0: [12d8:c008] type 01 class 0x060400 [ 5.858172] pci 0005:02:06.0: PME# supported from D0 D3hot D3cold [ 5.860576] pci 0005:02:07.0: [12d8:c008] type 01 class 0x060400 [ 5.862235] pci 0005:02:07.0: PME# supported from D0 D3hot D3cold [ 5.869152] pci 0005:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.869518] pci 0005:02:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.877191] pci 0005:02:06.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.885289] pci 0005:02:07.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.893688] pci 0005:03:00.0: [8086:1533] type 00 class 0x020000 [ 5.899255] pci 0005:03:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.905096] pci 0005:03:00.0: reg 0x18: [io 0x0000-0x001f] [ 5.911053] pci 0005:03:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 5.918067] pci 0005:03:00.0: PME# supported from D0 D3hot D3cold [ 5.942605] pci_bus 0005:03: busn_res: [bus 03-ff] end is updated to 03 [ 5.944038] pci 0005:04:00.0: [8086:1533] type 00 class 0x020000 [ 5.944452] pci 0005:04:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.944786] pci 0005:04:00.0: reg 0x18: [io 0x0000-0x001f] [ 5.947889] pci 0005:04:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 5.955033] pci 0005:04:00.0: PME# supported from D0 D3hot D3cold [ 5.978138] pci_bus 0005:04: busn_res: [bus 04-ff] end is updated to 04 [ 5.979184] pci 0005:05:00.0: [8086:1533] type 00 class 0x020000 [ 5.979588] pci 0005:05:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.979958] pci 0005:05:00.0: reg 0x18: [io 0x0000-0x001f] [ 5.985062] pci 0005:05:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 5.992075] pci 0005:05:00.0: PME# supported from D0 D3hot D3cold [ 6.015096] pci_bus 0005:05: busn_res: [bus 05-ff] end is updated to 05 [ 6.022000] pci_bus 0005:06: busn_res: [bus 06-ff] end is updated to 06 [ 6.022339] pci_bus 0005:02: busn_res: [bus 02-ff] end is updated to 06 [ 6.022669] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f403fffff] [ 6.024868] pci 0005:00:00.0: BAR 13: assigned [io 0x100000-0x102fff] [ 6.031509] pci 0005:01:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f402fffff] [ 6.038659] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40300000-0x1f4037ffff] [ 6.046032] pci 0005:01:00.0: BAR 13: assigned [io 0x100000-0x102fff] [ 6.052198] pci 0005:02:04.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 6.059522] pci 0005:02:05.0: BAR 14: assigned [mem 0x1f40100000-0x1f401fffff] [ 6.066658] pci 0005:02:06.0: BAR 14: assigned [mem 0x1f40200000-0x1f402fffff] [ 6.073881] pci 0005:02:04.0: BAR 13: assigned [io 0x100000-0x100fff] [ 6.080474] pci 0005:02:05.0: BAR 13: assigned [io 0x101000-0x101fff] [ 6.086655] pci 0005:02:06.0: BAR 13: assigned [io 0x102000-0x102fff] [ 6.093381] pci 0005:03:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f4007ffff] [ 6.100719] pci 0005:03:00.0: BAR 3: assigned [mem 0x1f40080000-0x1f40083fff] [ 6.107729] pci 0005:03:00.0: BAR 2: assigned [io 0x100000-0x10001f] [ 6.114112] pci 0005:02:04.0: PCI bridge to [bus 03] [ 6.119100] pci 0005:02:04.0: bridge window [io 0x100000-0x100fff] [ 6.125837] pci 0005:02:04.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 6.133147] pci 0005:04:00.0: BAR 0: assigned [mem 0x1f40100000-0x1f4017ffff] [ 6.140351] pci 0005:04:00.0: BAR 3: assigned [mem 0x1f40180000-0x1f40183fff] [ 6.147467] pci 0005:04:00.0: BAR 2: assigned [io 0x101000-0x10101f] [ 6.154285] pci 0005:02:05.0: PCI bridge to [bus 04] [ 6.159006] pci 0005:02:05.0: bridge window [io 0x101000-0x101fff] [ 6.165827] pci 0005:02:05.0: bridge window [mem 0x1f40100000-0x1f401fffff] [ 6.172814] pci 0005:05:00.0: BAR 0: assigned [mem 0x1f40200000-0x1f4027ffff] [ 6.179906] pci 0005:05:00.0: BAR 3: assigned [mem 0x1f40280000-0x1f40283fff] [ 6.187185] pci 0005:05:00.0: BAR 2: assigned [io 0x102000-0x10201f] [ 6.193932] pci 0005:02:06.0: PCI bridge to [bus 05] [ 6.198662] pci 0005:02:06.0: bridge window [io 0x102000-0x102fff] [ 6.205026] pci 0005:02:06.0: bridge window [mem 0x1f40200000-0x1f402fffff] [ 6.212728] pci 0005:02:07.0: PCI bridge to [bus 06] [ 6.217457] pci 0005:01:00.0: PCI bridge to [bus 02-06] [ 6.222470] pci 0005:01:00.0: bridge window [io 0x100000-0x102fff] [ 6.229040] pci 0005:01:00.0: bridge window [mem 0x1f40000000-0x1f402fffff] [ 6.236320] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 6.241303] pci 0005:00:00.0: bridge window [io 0x100000-0x102fff] [ 6.247724] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f403fffff] [ 6.254702] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 6.263499] pci 0005:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.272141] pci 0005:02:04.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.280319] pci 0005:03:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 6.289243] pci 0005:02:05.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.297572] pci 0005:04:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 6.306310] pci 0005:02:06.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.314664] pci 0005:05:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 6.323099] pci 0005:02:07.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.333373] pcieport 0005:00:00.0: Adding to iommu group 7 [ 6.338666] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 6.344335] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 6.350016] pcieport 0005:01:00.0: Adding to iommu group 7 [ 6.354682] pcieport 0005:01:00.0: enabling device (0000 -> 0003) [ 6.363303] pcieport 0005:02:04.0: Adding to iommu group 7 [ 6.366209] pcieport 0005:02:04.0: enabling device (0000 -> 0003) [ 6.375128] pcieport 0005:02:05.0: Adding to iommu group 7 [ 6.377664] pcieport 0005:02:05.0: enabling device (0000 -> 0003) [ 6.386766] pcieport 0005:02:06.0: Adding to iommu group 7 [ 6.389422] pcieport 0005:02:06.0: enabling device (0000 -> 0003) [ 6.398408] pcieport 0005:02:07.0: Adding to iommu group 7 [ 6.404886] igb 0005:03:00.0: Adding to iommu group 7 [ 6.405967] igb 0005:03:00.0: enabling device (0000 -> 0002) [ 6.448962] pps pps0: new PPS source ptp0 [ 6.449470] igb 0005:03:00.0: added PHC on eth0 [ 6.449644] igb 0005:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.449893] igb 0005:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 8c:f3:19:35:1c:c5 [ 6.450269] igb 0005:03:00.0: eth0: PBA No: 000500-000 [ 6.450433] igb 0005:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.452199] igb 0005:04:00.0: Adding to iommu group 7 [ 6.453188] igb 0005:04:00.0: enabling device (0000 -> 0002) [ 6.494575] pps pps1: new PPS source ptp1 [ 6.495037] igb 0005:04:00.0: added PHC on eth1 [ 6.495205] igb 0005:04:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.495515] igb 0005:04:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 8c:f3:19:35:1c:c6 [ 6.495833] igb 0005:04:00.0: eth1: PBA No: 000500-000 [ 6.495990] igb 0005:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.497553] igb 0005:05:00.0: Adding to iommu group 7 [ 6.499161] igb 0005:05:00.0: enabling device (0000 -> 0002) [ 6.543383] pps pps2: new PPS source ptp2 [ 6.543928] igb 0005:05:00.0: added PHC on eth2 [ 6.544107] igb 0005:05:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.544478] igb 0005:05:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 8c:f3:19:35:1c:c7 [ 6.544854] igb 0005:05:00.0: eth2: PBA No: 000500-000 [ 6.545009] igb 0005:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.580195] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.604307] host1x 13e10000.host1x: initialized [ 6.605929] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.606773] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.608180] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.608931] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.610056] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.610625] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.611949] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.612668] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.616997] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.623521] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.633601] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.640417] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.650794] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.657487] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.667546] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.674662] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.684369] falcon 15340000.vic: Adding to iommu group 17 [ 6.699611] falcon 15340000.vic: initialized [ 6.700611] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.706122] falcon 15380000.nvjpg: initialized [ 6.706713] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.716972] falcon 154c0000.nvenc: initialized [ 6.717659] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.727218] falcon 15a80000.nvenc1: initialized [ 6.727841] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.740032] nvdec 15480000.nvdec: initialized [ 6.740625] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.751098] nvdec 15140000.nvdec1: initialized [ 6.751689] tsec 15500000.tsec: Adding to iommu group 18 [ 6.756944] tsec 15500000.tsec: initialized [ 6.757460] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.764830] tsec 15100000.tsecb: initialized [ 6.768492] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.797429] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.809732] gpio-374 (wifi-enable): hogged as output/high [ 6.810009] gpio-431 (camera-control-output-low): hogged as output/low [ 6.810268] gpio-432 (camera-control-output-low): hogged as output/low [ 6.811880] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.813933] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.814574] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.816124] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.821649] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.827339] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.832752] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.841310] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.848417] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.860428] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.864773] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.870590] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.879731] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.888716] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.896209] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.903543] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.909761] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.919756] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.925694] pva 16000000.pva0: Adding to iommu group 22 [ 6.953770] pva 16000000.pva0: initialized [ 6.958555] pva 16800000.pva1: Adding to iommu group 23 [ 6.969920] pva 16800000.pva1: initialized [ 6.973819] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.986361] nvdla 15880000.nvdla0: initialized [ 6.987735] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.997289] nvdla 158c0000.nvdla1: initialized [ 7.001167] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 7.001469] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 7.001684] tegradc 15200000.display: Adding to iommu group 26 [ 7.001803] random: crng init done [ 7.003055] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 7.003105] tegradccommon 15200000.display-hub: host1x channel mapped [ 7.003704] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 7.003743] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 7.005067] tegradc 15210000.display: Adding to iommu group 26 [ 7.005669] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 7.012795] tegradccommon 15200000.display-hub: dma mapping done [ 7.018668] tegra_cec 3960000.tegra_cec: probed [ 7.019515] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 7.042469] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 7.047671] kfuse 3830000.kfuse: initialized [ 7.052160] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 7.058137] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 7.065432] serial-tegra 3100000.serial: Adding to iommu group 2 [ 7.071548] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 7.080827] serial-tegra 3110000.serial: Adding to iommu group 2 [ 7.086029] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 7.095261] serial-tegra 3140000.serial: Adding to iommu group 2 [ 7.101011] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 7.121137] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 7.121457] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.124343] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 7.132217] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 7.140911] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 7.147790] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.155239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.162448] usb usb1: Product: xHCI Host Controller [ 7.167400] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 7.173704] usb usb1: SerialNumber: 3610000.xhci [ 7.179317] hub 1-0:1.0: USB hub found [ 7.182026] hub 1-0:1.0: 4 ports detected [ 7.186562] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.191683] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 7.199023] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 7.207079] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 7.214875] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.221865] usb usb2: Product: xHCI Host Controller [ 7.226816] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 7.233035] usb usb2: SerialNumber: 3610000.xhci [ 7.238399] hub 2-0:1.0: USB hub found [ 7.241545] hub 2-0:1.0: 4 ports detected [ 7.284880] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 7.291848] i2c i2c-2: Added multiplexed i2c bus 9 [ 7.293562] i2c i2c-2: Added multiplexed i2c bus 10 [ 7.293759] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 7.307262] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1903000 KHz, changing to: 1907200 KHz [ 7.308313] tegra194-cpufreq ccplex: probed with BWMGR [ 7.309575] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 7.310073] irq: IRQ298: trimming hierarchy from :pmc@c360000 [ 7.310506] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 7.311717] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 7.318603] tegra194-vi5 15c10000.vi: initialized [ 7.320101] tegradc 15200000.display: disp0 connected to head0->sor1 [ 7.320849] mmc0: CQHCI version 5.10 [ 7.321270] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 7.321503] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 7.321509] nvethernet 2490000.ethernet: failed to read MDIO address [ 7.321518] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 7.321524] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 7.321528] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 7.321978] generic_infoframe_type: 0x87 [ 7.327568] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 7.331603] tegradc 15200000.display: DT parsed successfully [ 7.339715] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 7.346376] tegradc 15200000.display: Display dc.0000000050b610ae registered with id=0 [ 7.352820] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 7.354655] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 7.360526] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 7.367285] nvethernet 2490000.ethernet: Ethernet MAC address: 8c:f3:19:35:1c:c4 [ 7.369951] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 7.369956] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 7.370278] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 7.382116] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 7.383622] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.396830] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.403731] nvethernet 2490000.ethernet: Macsec not supported [ 7.414240] tegradc 15200000.display: probed [ 7.420842] nvethernet 2490000.ethernet: eth3 (HW ver: 50) created with 1 DMA channels [ 7.439782] mmc0: Command Queue Engine enabled [ 7.444404] irq: IRQ300: trimming hierarchy from :pmc@c360000 [ 7.449411] mmc0: periodic cache flush enabled [ 7.449424] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.449967] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.455507] irq: IRQ301: trimming hierarchy from :interrupt-controller@3881000 [ 7.463092] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 7.470353] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.476226] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.481821] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.501327] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.557006] tegra-se-nvhost 15810000.se: initialized [ 7.557032] Console: switching to colour frame buffer device 80x30 [ 7.566783] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.567735] tegradc 15200000.display: fb registered [ 7.574749] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.578895] irq: IRQ302: trimming hierarchy from :pmc@c360000 [ 7.585677] tegra-se-nvhost 15820000.se: initialized [ 7.591434] tegradc 15210000.display: disp1 connected to head1->sor [ 7.597562] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.602174] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.608519] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.615302] tegradc 15210000.display: DT parsed successfully [ 7.627654] tegradc 15210000.display: Display dc.0000000080c39a60 registered with id=1 [ 7.635559] tegradc 15210000.display: vblank syncpt # 13 for dc 1 [ 7.635582] tegra-se-nvhost 15830000.se: initialized [ 7.641812] tegradc 15210000.display: vpulse3 syncpt # 14 for dc 1 [ 7.648050] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.659256] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.659861] usb 1-2: New USB device found, idVendor=04b4, idProduct=6506, bcdDevice=50.00 [ 7.660692] tegradc 15210000.display: probed [ 7.678072] tegradc 15210000.display: fb registered [ 7.678078] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.678226] tegra-se-nvhost 15840000.se: initialized [ 7.679447] hub 1-2:1.0: USB hub found [ 7.679536] hub 1-2:1.0: 4 ports detected [ 7.698727] Reserved SVD code 117 [ 7.701043] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.702813] Reserved SVD code 118 [ 7.707991] tegra_actmon d230000.actmon: in actmon_register()... [ 7.720412] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.721879] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.727793] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.733313] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.739439] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 7.747320] hvc_sysfs: hypervisor is not present [ 7.784955] ALSA device list: [ 7.785058] No soundcards found. [ 7.787731] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using tegra-xusb [ 7.790828] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 7.799420] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 7.804778] dp lt: state 0 (Reset), pending_lt_evt 1 [ 7.804895] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 7.805084] dp lt: state 0 (Reset), pending_lt_evt 0 [ 7.807348] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 7.808016] usb 2-3: New USB device found, idVendor=04b4, idProduct=6504, bcdDevice=50.00 [ 7.810085] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 7.818392] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.824275] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 7.833260] hub 2-3:1.0: USB hub found [ 7.837734] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 7.837744] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 7.842045] hub 2-3:1.0: 4 ports detected [ 7.848409] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 7.848416] dp lt: tx_pu: 0x20 [ 7.892369] dp lt: CR not done [ 7.893371] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 7.893546] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 7.893734] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 7.894232] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 7.901429] dp lt: CR retry [ 7.904055] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 7.912019] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 7.918074] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 7.924623] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 7.931557] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 7.938270] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 7.945023] dp lt: tx_pu: 0x40 [ 7.967448] usb 1-2.3: new high-speed USB device number 3 using tegra-xusb [ 7.972367] dp lt: CR done [ 7.972466] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 7.972688] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 7.996828] dp lt: CE not done [ 7.997844] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 7.998056] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 7.998242] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 7.998411] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 8.004426] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 8.011261] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 8.017986] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 8.024473] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 8.031468] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 8.031538] dp lt: tx_pu: 0x60 [ 8.037936] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 8.041308] dp lt: CE retry [ 8.049219] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 8.058237] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 8.080832] usb 1-2.3: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 [ 8.081035] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.081238] usb 1-2.3: Product: 4-Port USB 2.0 Hub [ 8.085184] usb 1-2.3: Manufacturer: Generic [ 8.090312] dp lt: CE done [ 8.091127] hub 1-2.3:1.0: USB hub found [ 8.092273] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 8.092322] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 8.097886] hub 1-2.3:1.0: 4 ports detected [ 8.105327] Extcon AUX0(DP): enable [ 8.120138] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 8.125225] Freeing unused kernel memory: 3968K [ 8.127532] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 8.147545] Run /init as init process [ 8.152260] usb 2-3.3: new SuperSpeed Gen 1 USB device number 3 using tegra-xusb [ 8.184625] usb 2-3.3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 [ 8.184859] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.185087] usb 2-3.3: Product: 4-Port USB 3.0 Hub [ 8.185227] usb 2-3.3: Manufacturer: Generic [ 8.194044] hub 2-3.3:1.0: USB hub found [ 8.195516] hub 2-3.3:1.0: 4 ports detected [ 8.204263] Root device found: mmcblk0p1 [ 8.206413] Found dev node: /dev/mmcblk0p1 [ 8.235456] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 8.235650] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 8.247434] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 8.260229] Reserved SVD code 117 [ 8.260305] Reserved SVD code 118 [ 8.269726] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp ▒▒WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ▒▒[ 8.318917] EXT4-fs (mmcblk0p1): 3 orphan inodes deleted [ 8.319068] EXT4-fs (mmcblk0p1): recovery complete [ 8.323717] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.323726] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323732] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323738] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323762] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323768] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323774] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323780] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323786] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323792] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323798] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323804] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323810] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323817] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323823] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323846] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323854] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323860] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323866] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323874] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323880] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323887] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.323894] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.323900] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.323907] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.323914] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 8.323921] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323928] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323935] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323942] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323949] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323956] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323963] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323974] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323981] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323987] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.323994] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324001] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324008] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324014] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324021] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324028] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324035] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324042] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324049] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324056] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324063] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.324073] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.324080] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.324087] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.324094] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.324099] tegradc 15210000.display: mode bw=30729816000 > link bw=25920000000 [ 8.324105] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.324109] tegradc 15210000.display: mode bw=31914888000 > link bw=25920000000 [ 8.324114] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324121] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324129] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324136] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324144] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324161] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 8.324166] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324174] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324182] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324189] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324197] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324204] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.324211] tegradc 15210000.display: blank - powerdown [ 8.329175] Rootfs mounted over mmcblk0p1 [ 8.369045] Switching from initrd to actual rootfs [ 8.373771] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 8.373799] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 8.373804] dp lt: state 0 (Reset), pending_lt_evt 0 [ 8.373810] dp lt: link training force disable [ 8.373813] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 8.395886] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 8.395890] Extcon AUX0(DP) disable [ 8.397574] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 8.397740] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 8.398728] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 8.398794] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.398806] tegradc 15210000.display: unblank [ 8.400069] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 8.400261] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 8.400488] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 8.403486] usb 1-2.3.1: new high-speed USB device number 4 using tegra-xusb [ 8.406314] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.417792] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 8.417796] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 8.417800] dp lt: state 0 (Reset), pending_lt_evt 0 [ 8.419926] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 8.419932] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 8.420393] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 8.420399] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 8.420405] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 8.420411] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 8.420416] dp lt: tx_pu: 0x20 [ 8.420927] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 8.444380] dp lt: CR not done [ 8.445347] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445350] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445353] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445355] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445358] dp lt: CR retry [ 8.445361] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 8.445366] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 8.445375] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445380] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445386] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445392] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 8.445396] dp lt: tx_pu: 0x40 [ 8.468365] dp lt: CR done [ 8.468369] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 8.468374] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 8.492843] dp lt: CE not done [ 8.493760] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493763] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493766] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493768] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493776] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493781] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493806] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493820] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 8.493826] dp lt: tx_pu: 0x60 [ 8.494318] dp lt: CE retry [ 8.494322] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 8.494329] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 8.517504] usb 1-2.3.1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 [ 8.517510] usb 1-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.517514] usb 1-2.3.1: Product: 4-Port USB 2.0 Hub [ 8.517518] usb 1-2.3.1: Manufacturer: Generic [ 8.518348] dp lt: CE done [ 8.518353] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 8.518405] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 8.518408] Extcon AUX0(DP): enable [ 8.519274] hub 1-2.3.1:1.0: USB hub found [ 8.520355] hub 1-2.3.1:1.0: 4 ports detected [ 8.535052] tegradc 15210000.display: sync windows ret = 246 [ 8.592175] usb 2-3.3.1: new SuperSpeed Gen 1 USB device number 4 using tegra-xusb [ 9.423763] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.423771] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423806] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423812] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423818] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423824] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423830] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423835] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423841] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423865] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423871] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423876] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423882] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423888] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423894] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423900] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423906] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423911] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423917] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423923] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423946] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423952] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.423958] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.423965] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.423971] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.423977] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 9.423984] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.423990] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.423996] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424019] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424026] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424033] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424041] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424047] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424054] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424061] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424068] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424074] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424081] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424087] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424095] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424102] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424108] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424115] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424123] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424130] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424136] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.424147] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.424154] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.424161] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.424168] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.424172] tegradc 15210000.display: mode bw=30729816000 > link bw=25920000000 [ 9.424177] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.424180] tegradc 15210000.display: mode bw=31914888000 > link bw=25920000000 [ 9.424186] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424193] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424200] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424209] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424216] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424224] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424231] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424238] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424245] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424253] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424260] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.424266] tegradc 15210000.display: blank - powerdown [ 9.458050] usb 2-3.3.1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 [ 9.458057] usb 2-3.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.458061] usb 2-3.3.1: Product: 4-Port USB 3.0 Hub [ 9.458065] usb 2-3.3.1: Manufacturer: Generic [ 9.467870] hub 2-3.3.1:1.0: USB hub found [ 9.468500] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 9.468506] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 9.468511] dp lt: state 0 (Reset), pending_lt_evt 0 [ 9.468516] dp lt: link training force disable [ 9.468519] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 9.469822] hub 2-3.3.1:1.0: 4 ports detected [ 9.490253] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 9.490256] Extcon AUX0(DP) disable [ 9.491990] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 9.492155] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 9.493169] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 9.493249] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.493261] tegradc 15210000.display: unblank [ 9.494581] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 9.494973] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 9.495202] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 9.501380] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.512944] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 9.512949] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 9.512954] dp lt: state 0 (Reset), pending_lt_evt 0 [ 9.515106] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 9.515112] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 9.515576] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 9.515582] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 9.515587] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 9.515593] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 9.515598] dp lt: tx_pu: 0x20 [ 9.516087] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 9.527478] usb 1-2.3.3: new full-speed USB device number 5 using tegra-xusb [ 9.540348] dp lt: CR not done [ 9.541280] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541282] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541285] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541287] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541290] dp lt: CR retry [ 9.541293] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 9.541298] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 9.541306] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541311] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541320] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541342] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 9.541347] dp lt: tx_pu: 0x40 [ 9.564365] dp lt: CR done [ 9.564369] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 9.564374] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 9.588844] dp lt: CE not done [ 9.589752] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589755] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589758] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589760] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589766] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589772] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589777] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589783] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 9.589787] dp lt: tx_pu: 0x60 [ 9.590277] dp lt: CE retry [ 9.590281] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 9.590286] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 9.614319] dp lt: CE done [ 9.614323] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 9.614374] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 9.614377] Extcon AUX0(DP): enable [ 9.629759] usb 1-2.3.3: New USB device found, idVendor=046d, idProduct=c336, bcdDevice= 9.00 [ 9.629764] usb 1-2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.629769] usb 1-2.3.3: Product: Gaming Keyboard G213 [ 9.629772] usb 1-2.3.3: Manufacturer: Logitech [ 9.629775] usb 1-2.3.3: SerialNumber: 085F39523435 [ 9.631029] tegradc 15210000.display: sync windows ret = 246 [ 9.633458] input: Logitech Gaming Keyboard G213 as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.0/0003:046D:C336.0001/input/input1 [ 10.539551] extcon-disp-state external-connection:disp-state: cable 44 state 1 [ 10.539561] Extcon DP: HPD enabled [ 10.549824] hpd: switching from state 2 (Check EDID) to state 4 (Enabled) [ 10.566489] systemd[1]: System time before build time, advancing clock. [ 10.599840] hid-generic 0003:046D:C336.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G213] on usb-3610000.xhci-2.3.3/input0 [ 10.602095] input: Logitech Gaming Keyboard G213 Keyboard as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.1/0003:046D:C336.0002/input/input2 [ 10.650751] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 10.653202] systemd[1]: Detected architecture arm64. [ 10.659752] input: Logitech Gaming Keyboard G213 Consumer Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.1/0003:046D:C336.0002/input/input3 [ 10.660459] hid-generic 0003:046D:C336.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G213] on usb-3610000.xhci-2.3.3/input1 [ 10.693507] systemd[1]: Set hostname to . [ 10.739462] usb 1-2.3.4: new full-speed USB device number 6 using tegra-xusb [ 10.845765] usb 1-2.3.4: New USB device found, idVendor=046d, idProduct=c084, bcdDevice= 7.03 [ 10.845972] usb 1-2.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.846139] usb 1-2.3.4: Product: G102 Prodigy Gaming Mouse [ 10.846260] usb 1-2.3.4: Manufacturer: Logitech [ 10.846358] usb 1-2.3.4: SerialNumber: 0F6D386A3134 [ 10.850236] input: Logitech G102 Prodigy Gaming Mouse as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.0/0003:046D:C084.0003/input/input6 [ 10.850969] hid-generic 0003:046D:C084.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G102 Prodigy Gaming Mouse] on usb-3610000.xhci-2.3.4/input0 [ 10.853256] input: Logitech G102 Prodigy Gaming Mouse Keyboard as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/0003:046D:C084.0004/input/input7 [ 10.911855] input: Logitech G102 Prodigy Gaming Mouse Consumer Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/0003:046D:C084.0004/input/input8 [ 10.912363] input: Logitech G102 Prodigy Gaming Mouse System Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/0003:046D:C084.0004/input/input9 [ 10.912981] hid-generic 0003:046D:C084.0004: input,hiddev97,hidraw3: USB HID v1.11 Keyboard [Logitech G102 Prodigy Gaming Mouse] on usb-3610000.xhci-2.3.4/input1 [ 11.182656] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 11.182964] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 11.187306] systemd[1]: Created slice system-modprobe.slice. [ 11.189176] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 11.190700] systemd[1]: Created slice User and Session Slice. [ 11.191531] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 11.193163] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 11.193837] systemd[1]: Reached target User and Group Name Lookups. [ 11.194225] systemd[1]: Reached target Slices. [ 11.194615] systemd[1]: Reached target Swap. [ 11.195942] systemd[1]: Listening on RPCbind Server Activation Socket. [ 11.196755] systemd[1]: Listening on Syslog Socket. [ 11.197557] systemd[1]: Listening on fsck to fsckd communication Socket. [ 11.198135] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 11.199595] systemd[1]: Listening on Journal Audit Socket. [ 11.200451] systemd[1]: Listening on Journal Socket (/dev/log). [ 11.201452] systemd[1]: Listening on Journal Socket. [ 11.204496] systemd[1]: Listening on udev Control Socket. [ 11.209415] systemd[1]: Listening on udev Kernel Socket. [ 11.220044] systemd[1]: Mounting Huge Pages File System... [ 11.225461] systemd[1]: Mounting POSIX Message Queue File System... [ 11.231062] systemd[1]: Mounting RPC Pipe File System... [ 11.237312] systemd[1]: Mounting Kernel Debug File System... [ 11.242942] systemd[1]: Mounting Kernel Trace File System... [ 11.250107] systemd[1]: Starting Journal Service... [ 11.257083] systemd[1]: Starting Set the console keyboard layout... [ 11.262615] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 11.263339] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 11.275434] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 11.282754] systemd[1]: Started Nameserver information manager. [ 11.284965] systemd[1]: Reached target Network (Pre). [ 11.292466] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 11.298534] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 11.304615] systemd[1]: Starting Load Kernel Modules... [ 11.318158] systemd[1]: Starting Remount Root and Kernel File Systems... [ 11.325459] systemd[1]: Starting udev Coldplug all Devices... [ 11.333424] systemd[1]: Mounted Huge Pages File System. [ 11.334431] systemd[1]: Mounted POSIX Message Queue File System. [ 11.337029] systemd[1]: Mounted RPC Pipe File System. [ 11.342590] systemd[1]: Mounted Kernel Debug File System. [ 11.347555] systemd[1]: Mounted Kernel Trace File System. [ 11.349887] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 11.353831] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 11.365176] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 11.370628] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 11.373480] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 11.373500] nvmap_page_pool_init: Total RAM pages: 1754838 [ 11.373504] nvmap_page_pool_init: nvmap page pool size: 219354 pages (856 MB) [ 11.374151] nvmap_background_zero_thread: PP zeroing thread starting. [ 11.374352] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 11.374532] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 11.374541] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 11.433978] systemd[1]: nvfb-udev.service: Succeeded. [ 11.440109] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 11.450630] systemd[1]: Finished Remount Root and Kernel File Systems. [ 11.461958] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 11.462457] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.470206] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 11.470206] [ 11.474131] systemd[1]: Starting Load/Save Random Seed... [ 11.493622] systemd[1]: Starting Create System Users... [ 11.507185] systemd[1]: Finished Load Kernel Modules. [ 11.508993] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 11.514583] systemd[1]: Mounting Kernel Configuration File System... [ 11.519322] systemd[1]: Started OP-TEE Client Supplicant. [ 11.524476] systemd[1]: Starting Apply Kernel Variables... [ 11.531871] systemd[1]: Finished Set the console keyboard layout. [ 11.538735] systemd[1]: Finished Load/Save Random Seed. [ 11.540042] systemd[1]: Mounted Kernel Configuration File System. [ 11.550077] systemd[1]: Finished Create System Users. [ 11.555052] systemd[1]: Starting Create Static Device Nodes in /dev... [ 12.882566] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 12.888266] imx219 9-0010: board setup failed [ 12.888497] imx219: probe of 9-0010 failed with error -121 [ 12.916929] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 12.922508] imx219 10-0010: board setup failed [ 12.922735] imx219: probe of 10-0010 failed with error -121 [ 13.941358] using random self ethernet address [ 13.941493] using random host ethernet address [ 14.195752] 1 fixed-partitions partitions found on MTD device spi6.0 [ 14.195944] Creating 1 MTD partitions on "spi6.0": [ 14.196068] 0x000000000000-0x000002000000 : "Whole_flash0" [ 15.355012] using random self ethernet address [ 15.355158] using random host ethernet address [ 16.137082] IRQ237: set affinity failed(-22). [ 16.137199] IRQ238: set affinity failed(-22). [ 16.137291] IRQ239: set affinity failed(-22). [ 16.137381] IRQ240: set affinity failed(-22). [ 16.137470] IRQ241: set affinity failed(-22). [ 16.137560] IRQ242: set affinity failed(-22). [ 16.137665] IRQ243: set affinity failed(-22). [ 16.137749] IRQ244: set affinity failed(-22). [ 16.137832] IRQ245: set affinity failed(-22). [ 16.137918] IRQ246: set affinity failed(-22). [ 16.139508] CPU4: shutdown [ 16.220682] CPU5: shutdown Ubuntu 20.04.4 LTS ubuntu ttyTCU0 ubuntu login: [ 28.541106] nvidia: loading out-of-tree module taints kernel. [ 86.624542] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [ 86.626158] sd 0:0:0:0: [sda] 121208832 512-byte logical blocks: (62.1 GB/57.8 GiB) [ 86.626800] sd 0:0:0:0: [sda] Write Protect is off [ 86.627329] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 86.891809] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 179.296072] Trying to unregister non-registered hwtime source ▒▒WARNING @ [platform/drivers/mailbox/mail_routing_layer/mail_routing_layer.c]: mail rx timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout WARNING @ [platform/drivers/mailbox/tmo_link_provider/mail_tmo.c]: mail tmo TX timeout ▒▒ [0000.024] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.032] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.043] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.055] I> Ram repair fuse : 0x0 [0000.058] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.084] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.093] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 41500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ▒▒▒▒main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ▒▒ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.057] E> I2C: slave not found in slaves. [0002.058] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.059] E> I2C_DEV: Failed to send register address 0x00000000. [0002.060] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. [0002.061] E> eeprom: Failed to read I2C slave device [0002.064] I> Failed to read CVB eeprom data @ AE [0002.068] I> Retrying CVB eeprom read @ AC ... [0002.073] E> I2C: slave not found in slaves. [0002.077] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0002.085] E> I2C_DEV: Failed to send register address 0x00000000. [0002.091] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0002.100] E> eeprom: Failed to read I2C slave device [0002.104] I> Failed to read CVB eeprom data @ AC [0002.366] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.367] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.367] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.368] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.368] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.369] I> dram_block larger than 80000000 [0002.371] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.382] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.386] I> found decompressor handler: lz4 [0002.613] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.615] I> Setting EKB blob info to OPTEE dtb finished. ▒▒NOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ▒▒ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ▒▒▒▒clk_early initialized ▒▒I/TC:▒▒mail_early initialized ▒▒ N▒▒fuse initialized hwwdt initialized ▒▒on-s▒▒t194_ec_get_ec_list: found 45 ecs ▒▒ecure exter▒▒ec initialized vmon_setup_monitors: found 3 monitors vmon initialized ▒▒nal▒▒adc initialized ▒▒ ▒▒fmon_populate_monitors: found 73 monitors ▒▒DT found ▒▒fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ▒▒I/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu ▒▒clk_dt_late initialized ▒▒A▒▒noc_late initialized ▒▒u▒▒pm_post initialized dbells initialized ▒▒g 1▒▒dmce initialized ▒▒1▒▒cvc initialized ▒▒ 03:23:20 UT▒▒avfs_clk_mach_post initialized ▒▒C 20▒▒avfs_clk_platform_post initialized ▒▒22 ▒▒cvc_late initialized regulator_post initialized ▒▒aarc▒▒rm initialized console_late initialized clk_dt_post initialized mc_reg initialized ▒▒h64 I/TC: WARNI▒▒pg_post initialized profile initialized fuse_late initialized extras_post initializeentering main console loop ] d bpmp: init complete ▒▒NG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ▒▒ [0003.233] I> Welcome to NVDisp-Init [0003.233] I> NVDisp-Init version: t194-f9ecfedc [0003.234] I> CPU-BL Params @ 0xca020000 [0003.234] I> 0) Base:0x00000000 Size:0x00000000 [0003.234] I> 1) Base:0xc8300000 Size:0x00100000 [0003.235] I> 2) Base:0xc9800000 Size:0x00200000 [0003.235] I> 3) Base:0xc8600000 Size:0x00200000 [0003.238] I> 4) Base:0xc8200000 Size:0x00100000 [0003.242] I> 5) Base:0xc8100000 Size:0x00100000 [0003.246] I> 6) Base:0xc9400000 Size:0x00400000 [0003.251] I> 7) Base:0xc9000000 Size:0x00400000 [0003.255] I> 8) Base:0xc8000000 Size:0x00100000 [0003.260] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.264] I> 10) Base:0xca800000 Size:0x00800000 [0003.269] I> 11) Base:0x40000000 Size:0x00040000 [0003.273] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.278] I> 13) Base:0x40046000 Size:0x00002000 [0003.282] I> 14) Base:0x40048000 Size:0x00002000 [0003.287] I> 15) Base:0xaf000000 Size:0x00004000 [0003.291] I> 16) Base:0x4004a000 Size:0x00002000 [0003.296] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.300] I> 18) Base:0x4004c000 Size:0x00002000 [0003.305] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.309] I> 20) Base:0x4004e000 Size:0x00002000 [0003.313] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.318] I> 22) Base:0x00000000 Size:0x00000000 [0003.322] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.327] I> 24) Base:0xcc000000 Size:0x02000000 [0003.331] I> 25) Base:0x40050000 Size:0x00002000 [0003.336] I> 26) Base:0x40040000 Size:0x00006000 [0003.340] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.345] I> 28) Base:0xc8400000 Size:0x00200000 [0003.349] I> 29) Base:0xc8800000 Size:0x00400000 [0003.354] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.358] I> 31) Base:0x00000000 Size:0x00000000 [0003.363] I> 32) Base:0xf8000000 Size:0x08000000 [0003.367] I> 33) Base:0xce000000 Size:0x2a000000 [0003.371] I> 34) Base:0xcb000000 Size:0x01000000 [0003.376] I> 35) Base:0xae000000 Size:0x01000000 [0003.380] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.385] I> 37) Base:0xca000000 Size:0x00800000 [0003.389] I> 38) Base:0x80000000 Size:0x20000000 [0003.394] I> 39) Base:0xb0000000 Size:0x08000000 [0003.398] I> 40) Base:0x00000000 Size:0x00000000 [0003.403] I> 41) Base:0x00000000 Size:0x00000000 [0003.407] I> 42) Base:0x00000000 Size:0x00000000 [0003.412] I> 43) Base:0x00000000 Size:0x00000000 [0003.416] I> 44) Base:0x00000000 Size:0x00000000 [0003.421] I> 45) Base:0x00000000 Size:0x00000000 [0003.425] GIC-SPI Target CPU: 0 [0003.428] Interrupts Init done [0003.431] calling constructors [0003.434] initializing heap [0003.436] I> Heap: [0xa0960000 ... 0xadf00000] [0003.441] initializing threads [0003.444] initializing timers [0003.446] creating bootstrap completion thread [0003.451] top of bootstrap2() [0003.453] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.458] initializing platform [0003.461] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.466] W> device prod register failed [0003.470] I> Bl_dtb @0xadf00000 [0003.473] I> gpio framework initialized [0003.484] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.489] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.495] I> fixed regulator driver initialized [0003.511] I> register 'maxim' power off handle [0003.513] I> virtual i2c enabled [0003.513] I> registered 'maxim,max20024' pmic [0003.514] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.515] I> Boot-device: QSPI [0003.517] I> Boot_device: QSPI_FLASH instance: 0 [0003.522] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.533] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.540] I> QSPI source rate = 204000 Khz [0003.543] I> Requested rate for QSPI clock = 34000 Khz [0003.548] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.553] I> tx_clk_tap_delay : 0 [0003.556] I> rx_clk_tap_delay : 16 [0003.559] I> QSPI Flash Size = 32 MB [0003.567] I> Qspi initialized successfully [0003.567] I> qspi flash-0 params source = boot args [0003.572] W> No board IDs available [0003.574] E> Failed to get board id info! [0003.580] I> sdmmc-3 params source = safe params [0003.587] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.588] W> Cannot find any partition table for 00000003 [0003.593] E> Failed to publish 00000003 [0003.598] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.617] I> regulator 'vdd-hdmi-5v0' already enabled [0003.623] I> regulator 'vdd-hdmi-5v0' already enabled [0003.624] E> tegrabl_display_init_regulator: hdmi cable is not connected [0003.624] E> tegrabl_display_get_pdata, failed to parse dtb settings [0003.631] E> invalid display type [0003.632] E> cannot find any other nvdisp nodes [0003.633] E> no valid display unit config found in dtb [0003.640] W> display init failed [0003.641] initializing target [0003.643] calling apps_init() [0003.646] starting app kernel_boot_app [0003.650] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) Press ESCAPE for boot options ** WARNING: Test Key is used. ** ...... boot > Reboot Into Firmware Interface boot > Reboot Into Firmware Interface boot > Reboot Into Firmware Interface boot Reboot Into Firmware Interface Could not locate device tree fixup protocol, skipping. EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from command line option EFI stub: Exiting boot services and installing virtual address map... ▒▒I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ▒▒[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.65 (builder@runner-mupgttyp-project-231336-concurrent-06czzj) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Sun Aug 14 13:08:25 UTC 2022 [ 0.000000] Machine model: SIMATIC IPC520A [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x277587698 SMBIOS=0xc7db0000 SMBIOS 3.0=0x258a30000 MEMATTR=0x2580c9018 ESRT=0x25943f298 RNG=0x27c595918 MEMRESERVE=0x25943cb98 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025943f298 to 0x000000025943f2d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025805ffff] [ 0.000000] node 0: [mem 0x0000000258060000-0x000000025808ffff] [ 0.000000] node 0: [mem 0x0000000258090000-0x00000002586c5fff] [ 0.000000] node 0: [mem 0x00000002586c6000-0x000000025888dfff] [ 0.000000] node 0: [mem 0x000000025888e000-0x0000000258a1ffff] [ 0.000000] node 0: [mem 0x0000000258a20000-0x0000000258a3ffff] [ 0.000000] node 0: [mem 0x0000000258a40000-0x00000002591fffff] [ 0.000000] node 0: [mem 0x0000000259200000-0x000000025938ffff] [ 0.000000] node 0: [mem 0x0000000259390000-0x000000025943ffff] [ 0.000000] node 0: [mem 0x0000000259440000-0x00000002595bffff] [ 0.000000] node 0: [mem 0x00000002595c0000-0x00000002595cffff] [ 0.000000] node 0: [mem 0x00000002595d0000-0x000000025969ffff] [ 0.000000] node 0: [mem 0x00000002596a0000-0x00000002596affff] [ 0.000000] node 0: [mem 0x00000002596b0000-0x00000002596fffff] [ 0.000000] node 0: [mem 0x0000000259700000-0x000000025977ffff] [ 0.000000] node 0: [mem 0x0000000259780000-0x0000000259a9ffff] [ 0.000000] node 0: [mem 0x0000000259aa0000-0x0000000259abffff] [ 0.000000] node 0: [mem 0x0000000259ac0000-0x0000000259b2ffff] [ 0.000000] node 0: [mem 0x0000000259b30000-0x0000000259fbffff] [ 0.000000] node 0: [mem 0x0000000259fc0000-0x000000025a00ffff] [ 0.000000] node 0: [mem 0x000000025a010000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839269 [ 0.000000] Kernel command line: initrd=\initrd.img-5.10.65 LABEL=Boot root=PARTUUID=7f29a0a4-53ec-49e7-bce7-ac088f0daeaf console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 rootwait rw [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6938552K/7473856K available (18304K kernel code, 3184K rwdata, 6972K rodata, 3840K init, 1071K bss, 469768K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x384/0x500 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000592] Console: colour dummy device 80x25 [ 0.002158] printk: console [tty0] enabled [ 0.002219] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002256] pid_max: default: 32768 minimum: 301 [ 0.002416] LSM: Security Framework initializing [ 0.002492] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002527] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.004925] rcu: Hierarchical SRCU implementation. [ 0.005151] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.005637] DTS File Name: [ 0.005678] DTB Build time: [ 0.007474] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.007700] Remapping and enabling EFI services. [ 0.009200] smp: Bringing up secondary CPUs ... [ 0.038318] Detected PIPT I-cache on CPU1 [ 0.038431] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071960] Detected PIPT I-cache on CPU2 [ 0.072115] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101616] Detected PIPT I-cache on CPU3 [ 0.101763] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131374] Detected PIPT I-cache on CPU4 [ 0.131474] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161203] Detected PIPT I-cache on CPU5 [ 0.161365] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161706] smp: Brought up 1 node, 6 CPUs [ 0.161899] SMP: Total of 6 processors activated. [ 0.161913] CPU features: detected: Privileged Access Never [ 0.161943] CPU features: detected: LSE atomic instructions [ 0.161954] CPU features: detected: User Access Override [ 0.161966] CPU features: detected: 32-bit EL0 Support [ 0.161980] CPU features: detected: RAS Extension Support [ 0.161993] CPU features: detected: CRC32 instructions [ 0.162006] CPU features: detected: 32-bit EL1 Support [ 0.231033] CPU: All CPU(s) started at EL2 [ 0.235537] devtmpfs: initialized [ 0.271954] Registered cp15_barrier emulation handler [ 0.272039] Registered setend emulation handler [ 0.272062] KASLR enabled [ 0.272275] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.272301] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.273591] pinctrl core: initialized pinctrl subsystem [ 0.274483] SMBIOS 3.0.0 present. [ 0.274515] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.275048] NET: Registered protocol family 16 [ 0.276672] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.277172] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.277881] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.277934] audit: initializing netlink subsys (disabled) [ 0.278201] audit: type=2000 audit(0.276:1): state=initialized audit_enabled=0 res=1 [ 0.279589] printk: console [ramoops-1] enabled [ 0.279627] pstore: Registered ramoops as persistent store backend [ 0.279644] ramoops: using 0x200000@0xca600000, ecc: 0 [ 0.280059] thermal_sys: Registered thermal governor 'step_wise' [ 0.280068] thermal_sys: Registered thermal governor 'power_allocator' [ 0.280090] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.281488] cpuidle: using governor menu [ 0.281674] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.282044] ASID allocator initialised with 65536 entries [ 0.282244] Serial: AMBA PL011 UART driver [ 0.284903] Tegra reboot handler registered. [ 0.285082] DTS File Name: [ 0.285103] DTB Build time: [ 0.355697] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.355918] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.356083] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.356233] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.356393] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.358534] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c10000 [ 0.358571] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c20000 [ 0.358616] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c30000 [ 0.358648] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c40000 [ 0.358678] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c50000 [ 0.358706] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2b80000 [ 0.358733] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2b90000 [ 0.358760] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2ba0000 [ 0.358792] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2bb0000 [ 0.358820] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1700000 [ 0.358851] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1710000 [ 0.358879] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1720000 [ 0.358906] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1730000 [ 0.358933] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1740000 [ 0.358961] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1750000 [ 0.358988] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1760000 [ 0.359017] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1770000 [ 0.359109] mc-err: mcerr ops are set to t19x [ 0.370594] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.370625] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.370643] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.370658] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.376333] ACPI: Interpreter disabled. [ 0.377388] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.378568] iommu: Default domain type: Translated [ 0.378628] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.378974] SCSI subsystem initialized [ 0.379122] usbcore: registered new interface driver usbfs [ 0.379163] usbcore: registered new interface driver hub [ 0.379200] usbcore: registered new device driver usb [ 0.379589] mc: Linux media interface: v0.10 [ 0.379620] videodev: Linux video capture interface: v2.00 [ 0.379884] pps_core: LinuxPPS API ver. 1 registered [ 0.379898] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.379922] PTP clock support registered [ 0.380137] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.380443] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.380522] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.381123] Registered efivars operations [ 0.381499] FPGA manager framework [ 0.381715] Advanced Linux Sound Architecture Driver Initialized. [ 0.382259] Bluetooth: Core ver 2.22 [ 0.382302] NET: Registered protocol family 31 [ 0.382321] Bluetooth: HCI device and connection manager initialized [ 0.382339] Bluetooth: HCI socket layer initialized [ 0.382357] Bluetooth: L2CAP socket layer initialized [ 0.382380] Bluetooth: SCO socket layer initialized [ 0.383578] camchar: rtcpu character device driver loaded [ 0.384137] clocksource: Switched to clocksource arch_sys_counter [ 0.709664] VFS: Disk quotas dquot_6.6.0 [ 0.709734] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.710057] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.710447] pnp: PnP ACPI: disabled [ 0.710897] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 0.710941] nvmap_page_pool_init: Total RAM pages: 1751022 [ 0.710961] nvmap_page_pool_init: nvmap page pool size: 218877 pages (854 MB) [ 0.711237] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.711324] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 0.720668] la/ptsa driver initialized. [ 0.720764] NET: Registered protocol family 2 [ 0.720921] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.725319] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.725383] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.725680] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.726140] TCP: Hash tables configured (established 65536 bind 65536) [ 0.726251] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726342] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726623] NET: Registered protocol family 1 [ 0.727541] RPC: Registered named UNIX socket transport module. [ 0.727608] RPC: Registered udp transport module. [ 0.727635] RPC: Registered tcp transport module. [ 0.727667] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.727703] PCI: CLS 0 bytes, default 64 [ 0.727959] Trying to unpack rootfs image as initramfs... [ 1.164349] Freeing initrd memory: 11940K [ 1.169199] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.169235] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.169277] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.169625] kvm [1]: IPA Size Limit: 40 bits [ 1.170166] kvm [1]: vgic interrupt IRQ9 [ 1.170818] kvm [1]: VHE mode initialized successfully [ 1.172811] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.179572] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.180512] NFS: Registering the id_resolver key type [ 1.180556] Key type id_resolver registered [ 1.180575] Key type id_legacy registered [ 1.180665] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.180699] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.180764] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.192117] NET: Registered protocol family 38 [ 1.192230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239) [ 1.192503] io scheduler mq-deadline registered [ 1.192527] io scheduler kyber registered [ 1.199343] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.202795] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.202880] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.202955] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.203028] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.203100] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.209864] scrncapt: init (heads:4 wins:6 planes:4) [ 1.209898] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.211034] EINJ: ACPI disabled. [ 1.213931] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.213964] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.213983] tegra-pmc: ### PMC reset level: L1 [ 1.214000] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.214054] tegra-pmc: PMC Prod config success [ 1.219593] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.225214] random: fast init done [ 1.225445] printk: console [ttyTCU0] enabled [ 2.798248] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.802673] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.807539] arm-smmu 10000000.iommu: stage 1 translation [ 2.812979] arm-smmu 10000000.iommu: stage 2 translation [ 2.818259] arm-smmu 10000000.iommu: nested translation [ 2.823807] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.830968] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.842201] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.844060] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.850904] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.858843] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.863944] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.868683] arm-smmu 12000000.iommu: stage 1 translation [ 2.874176] arm-smmu 12000000.iommu: stage 2 translation [ 2.879603] arm-smmu 12000000.iommu: nested translation [ 2.885031] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.891952] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.902986] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.905071] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.911660] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.919059] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.928836] tegra_profiler: version: 1.146, samples/io: 49/28 [ 2.932317] tegra_profiler: auth: init [ 2.936476] THERMAL EST: found 3 subdevs [ 2.939954] THERMAL EST num_resources: 0 [ 2.943586] [THERMAL EST subdev 0] [ 2.947180] [THERMAL EST subdev 1] [ 2.950571] [THERMAL EST subdev 2] [ 2.953556] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.960044] THERMAL EST: thz register success. [ 2.964525] THERMAL EST: end of probe, return err: 0 [ 2.973355] libphy: Fixed MDIO Bus: probed [ 2.973951] tun: Universal TUN/TAP device driver, 1.6 [ 2.979832] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.986138] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.991412] e1000e: Intel(R) PRO/1000 Network Driver [ 2.996600] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.002228] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.007962] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.014151] PPP generic driver version 2.4.2 [ 3.018484] PPP BSD Compression module registered [ 3.022690] PPP Deflate Compression module registered [ 3.027934] PPP MPPE Compression module registered [ 3.033203] usbcore: registered new interface driver r8152 [ 3.038710] usbcore: registered new interface driver asix [ 3.044200] usbcore: registered new interface driver ax88179_178a [ 3.050022] usbcore: registered new interface driver cdc_ether [ 3.055971] usbcore: registered new interface driver net1080 [ 3.061557] usbcore: registered new interface driver cdc_subset [ 3.067586] usbcore: registered new interface driver zaurus [ 3.073559] usbcore: registered new interface driver cdc_ncm [ 3.078958] usbcore: registered new interface driver aqc111 [ 3.084681] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.090678] ohci-pci: OHCI PCI platform driver [ 3.095228] ohci-platform: OHCI generic platform driver [ 3.100750] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.106710] usbcore: registered new interface driver uas [ 3.111296] usbcore: registered new interface driver usb-storage [ 3.117711] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.123736] mousedev: PS/2 mouse device common for all mice [ 3.128438] usbcore: registered new interface driver xpad [ 3.136663] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.139425] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:37 UTC (37) [ 3.146979] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.153705] i2c /dev entries driver [ 3.156900] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.162736] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.168257] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.173703] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.179006] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.184309] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.189951] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.202923] device-mapper: uevent: version 1.0.3 [ 3.203346] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.209639] cpuidle: Initializing cpuidle driver [ 3.214397] sdhci: Secure Digital Host Controller Interface driver [ 3.219028] sdhci: Copyright(c) Pierre Ossman [ 3.223139] Synopsys Designware Multimedia Card Interface Driver [ 3.229059] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.235231] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.235341] sdhci-tegra 3440000.sdhci: Adding to iommu group 4 [ 3.247854] pstore: ignoring unexpected backend 'efi' [ 3.252691] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.259910] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.284021] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.293983] vdd-1v0: supplied by regulator-dummy [ 3.299532] vdd-1v8-hs: supplied by regulator-dummy [ 3.304425] vdd-1v8-ls: supplied by regulator-dummy [ 3.309326] vdd-1v8-ao: supplied by regulator-dummy [ 3.313426] vddio-ddr-1v1: supplied by regulator-dummy [ 3.317926] vdd-rtc: supplied by regulator-dummy [ 3.319768] spmic-ldo1: supplied by regulator-dummy [ 3.321072] vdd-ao-3v3: supplied by regulator-dummy [ 3.327221] vddio-emmc-3v3: supplied by regulator-dummy [ 3.333658] spmic-ldo4: supplied by regulator-dummy [ 3.334951] vdd-usb-3v3: supplied by regulator-dummy [ 3.341209] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.347536] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.353079] spmic-ldo8: supplied by vdd-1v8-ls [ 3.354606] gpio-510 (gpio_default): hogged as output/high [ 3.356035] gpio-511 (gpio_default): hogged as output/high [ 3.359022] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.494771] max77686-rtc max77620-rtc: registered as rtc0 [ 3.495831] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.496212] max77620 4-003c: max77620 probe successful ▒▒rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ▒▒[ 4.299379] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.300533] hid: raw HID events driver (C) Jiri Kosina [ 4.301338] usbcore: registered new interface driver usbhid [ 4.301499] usbhid: USB HID core driver [ 4.303334] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 5 [ 4.304721] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ▒▒[ 38.288756] Camera-FW on t194-rce-safe started TCU early console enabled. [ 38.363412] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.465 ms) ▒▒[ 4.389307] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.389926] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.390815] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.391469] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.392850] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.393611] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.394227] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.395784] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (50) [ 4.396051] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.398867] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.406319] tegra_aon c1a0000.aon: Adding to iommu group 6 [ 4.412810] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.417037] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.423533] denver_knobs_init:MTS_VERSION:55637613 [ 4.433979] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 4.434364] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 4.442503] t19x_cache tegra-cache: probed [ 4.448000] optee: probing for conduit method. [ 4.450286] optee: revision 3.16 (65cc2218) [ 4.451315] optee: dynamic shared memory is enabled [ 4.459905] optee: initialized driver [ 4.465318] nvpmodel: initialized successfully [ 4.467613] tegra_hv: get_hvd: not initialized yet [ 4.471637] user_ivc_mempool: hypervisor not present [ 4.477718] usbcore: registered new interface driver snd-usb-audio [ 4.484058] u32 classifier [ 4.485668] input device check on [ 4.489243] Actions configured [ 4.493027] Initializing XFRM netlink socket [ 4.497791] NET: Registered protocol family 10 [ 4.504498] Segment Routing with IPv6 [ 4.505256] NET: Registered protocol family 17 [ 4.509701] NET: Registered protocol family 15 [ 4.514059] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.527934] Bluetooth: RFCOMM socket layer initialized [ 4.532378] Bluetooth: RFCOMM ver 1.11 [ 4.536029] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.541910] Bluetooth: HIDP socket layer initialized [ 4.548104] 9pnet: Installing 9P2000 support [ 4.551406] Key type dns_resolver registered [ 4.556744] registered taskstats version 1 [ 4.560514] pstore: Using crash dump compression: deflate [ 4.566286] tegra194-pcie 14160000.pcie: Adding to iommu group 7 [ 4.576144] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.578439] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.587123] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.595408] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 5.712831] tegra194-pcie 14160000.pcie: Phy link never came up [ 5.713370] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 5.713636] pci_bus 0004:00: root bus resource [bus 00-ff] [ 5.713847] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 5.714154] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 5.714352] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 5.714781] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 5.715254] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 5.729272] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 5.729633] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.731403] pcieport 0004:00:00.0: Adding to iommu group 7 [ 5.732974] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 5.734699] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 5.736360] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 5.737374] pci 0004:00:00.0: Removing from iommu group 7 [ 5.737734] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 5.742629] tegra194-pcie 141a0000.pcie: Adding to iommu group 8 [ 5.748035] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 5.748624] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 5.749549] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 5.758041] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.872457] tegra194-pcie 141a0000.pcie: Link up [ 5.875439] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.875705] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.875927] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.876316] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.876545] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.876925] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.877370] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.885954] pci 0005:01:00.0: [12d8:c008] type 01 class 0x060400 [ 5.886459] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.888068] pci 0005:01:00.0: PME# supported from D0 D3hot D3cold [ 5.894435] pci 0005:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.896617] pci 0005:02:04.0: [12d8:c008] type 01 class 0x060400 [ 5.898416] pci 0005:02:04.0: PME# supported from D0 D3hot D3cold [ 5.900055] pci 0005:02:05.0: [12d8:c008] type 01 class 0x060400 [ 5.901904] pci 0005:02:05.0: PME# supported from D0 D3hot D3cold [ 5.903414] pci 0005:02:06.0: [12d8:c008] type 01 class 0x060400 [ 5.905177] pci 0005:02:06.0: PME# supported from D0 D3hot D3cold [ 5.906732] pci 0005:02:07.0: [12d8:c008] type 01 class 0x060400 [ 5.908813] pci 0005:02:07.0: PME# supported from D0 D3hot D3cold [ 5.918111] pci 0005:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.922119] pci 0005:02:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.929756] pci 0005:02:06.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.937945] pci 0005:02:07.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.946589] pci 0005:03:00.0: [8086:1533] type 00 class 0x020000 [ 5.952223] pci 0005:03:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.957982] pci 0005:03:00.0: reg 0x18: [io 0x0000-0x001f] [ 5.963945] pci 0005:03:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 5.971000] pci 0005:03:00.0: PME# supported from D0 D3hot D3cold [ 5.993520] pci_bus 0005:03: busn_res: [bus 03-ff] end is updated to 03 [ 5.994781] pci 0005:04:00.0: [8086:1533] type 00 class 0x020000 [ 5.995186] pci 0005:04:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.995651] pci 0005:04:00.0: reg 0x18: [io 0x0000-0x001f] [ 6.001117] pci 0005:04:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 6.007876] pci 0005:04:00.0: PME# supported from D0 D3hot D3cold [ 6.029936] pci_bus 0005:04: busn_res: [bus 04-ff] end is updated to 04 [ 6.031040] pci 0005:05:00.0: [8086:1533] type 00 class 0x020000 [ 6.031426] pci 0005:05:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 6.032228] pci 0005:05:00.0: reg 0x18: [io 0x0000-0x001f] [ 6.038065] pci 0005:05:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 6.045251] pci 0005:05:00.0: PME# supported from D0 D3hot D3cold [ 6.069681] pci_bus 0005:05: busn_res: [bus 05-ff] end is updated to 05 [ 6.076726] pci_bus 0005:06: busn_res: [bus 06-ff] end is updated to 06 [ 6.077057] pci_bus 0005:02: busn_res: [bus 02-ff] end is updated to 06 [ 6.077432] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f403fffff] [ 6.077728] pci 0005:00:00.0: BAR 13: assigned [io 0x100000-0x102fff] [ 6.084265] pci 0005:01:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f402fffff] [ 6.091677] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40300000-0x1f4037ffff] [ 6.098751] pci 0005:01:00.0: BAR 13: assigned [io 0x100000-0x102fff] [ 6.105164] pci 0005:02:04.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 6.112650] pci 0005:02:05.0: BAR 14: assigned [mem 0x1f40100000-0x1f401fffff] [ 6.119549] pci 0005:02:06.0: BAR 14: assigned [mem 0x1f40200000-0x1f402fffff] [ 6.126869] pci 0005:02:04.0: BAR 13: assigned [io 0x100000-0x100fff] [ 6.133372] pci 0005:02:05.0: BAR 13: assigned [io 0x101000-0x101fff] [ 6.139509] pci 0005:02:06.0: BAR 13: assigned [io 0x102000-0x102fff] [ 6.146286] pci 0005:03:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f4007ffff] [ 6.153653] pci 0005:03:00.0: BAR 3: assigned [mem 0x1f40080000-0x1f40083fff] [ 6.160625] pci 0005:03:00.0: BAR 2: assigned [io 0x100000-0x10001f] [ 6.167256] pci 0005:02:04.0: PCI bridge to [bus 03] [ 6.171998] pci 0005:02:04.0: bridge window [io 0x100000-0x100fff] [ 6.178726] pci 0005:02:04.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 6.186089] pci 0005:04:00.0: BAR 0: assigned [mem 0x1f40100000-0x1f4017ffff] [ 6.192993] pci 0005:04:00.0: BAR 3: assigned [mem 0x1f40180000-0x1f40183fff] [ 6.200349] pci 0005:04:00.0: BAR 2: assigned [io 0x101000-0x10101f] [ 6.207149] pci 0005:02:05.0: PCI bridge to [bus 04] [ 6.212124] pci 0005:02:05.0: bridge window [io 0x101000-0x101fff] [ 6.218493] pci 0005:02:05.0: bridge window [mem 0x1f40100000-0x1f401fffff] [ 6.225690] pci 0005:05:00.0: BAR 0: assigned [mem 0x1f40200000-0x1f4027ffff] [ 6.232832] pci 0005:05:00.0: BAR 3: assigned [mem 0x1f40280000-0x1f40283fff] [ 6.240312] pci 0005:05:00.0: BAR 2: assigned [io 0x102000-0x10201f] [ 6.246550] pci 0005:02:06.0: PCI bridge to [bus 05] [ 6.251533] pci 0005:02:06.0: bridge window [io 0x102000-0x102fff] [ 6.257927] pci 0005:02:06.0: bridge window [mem 0x1f40200000-0x1f402fffff] [ 6.265381] pci 0005:02:07.0: PCI bridge to [bus 06] [ 6.270254] pci 0005:01:00.0: PCI bridge to [bus 02-06] [ 6.275074] pci 0005:01:00.0: bridge window [io 0x100000-0x102fff] [ 6.281887] pci 0005:01:00.0: bridge window [mem 0x1f40000000-0x1f402fffff] [ 6.289180] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 6.294186] pci 0005:00:00.0: bridge window [io 0x100000-0x102fff] [ 6.300507] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f403fffff] [ 6.307652] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 6.316417] pci 0005:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.324967] pci 0005:02:04.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.333223] pci 0005:03:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 6.342133] pci 0005:02:05.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.350688] pci 0005:04:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 6.359184] pci 0005:02:06.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.367828] pci 0005:05:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 6.376282] pci 0005:02:07.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.386489] pcieport 0005:00:00.0: Adding to iommu group 8 [ 6.391620] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 6.397346] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 6.402819] pcieport 0005:01:00.0: Adding to iommu group 8 [ 6.407728] pcieport 0005:01:00.0: enabling device (0000 -> 0003) [ 6.416954] pcieport 0005:02:04.0: Adding to iommu group 8 [ 6.418798] pcieport 0005:02:04.0: enabling device (0000 -> 0003) [ 6.429240] pcieport 0005:02:05.0: Adding to iommu group 8 [ 6.430453] pcieport 0005:02:05.0: enabling device (0000 -> 0003) [ 6.439981] pcieport 0005:02:06.0: Adding to iommu group 8 [ 6.442331] pcieport 0005:02:06.0: enabling device (0000 -> 0003) [ 6.451602] pcieport 0005:02:07.0: Adding to iommu group 8 [ 6.457562] igb 0005:03:00.0: Adding to iommu group 8 [ 6.458596] igb 0005:03:00.0: enabling device (0000 -> 0002) [ 6.503149] pps pps0: new PPS source ptp0 [ 6.503799] igb 0005:03:00.0: added PHC on eth0 [ 6.503995] igb 0005:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.504384] igb 0005:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 8c:f3:19:35:1c:c5 [ 6.504745] igb 0005:03:00.0: eth0: PBA No: 000500-000 [ 6.504976] igb 0005:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.506583] igb 0005:04:00.0: Adding to iommu group 8 [ 6.507521] igb 0005:04:00.0: enabling device (0000 -> 0002) [ 6.549873] pps pps1: new PPS source ptp1 [ 6.550477] igb 0005:04:00.0: added PHC on eth1 [ 6.550665] igb 0005:04:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.550978] igb 0005:04:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 8c:f3:19:35:1c:c6 [ 6.551369] igb 0005:04:00.0: eth1: PBA No: 000500-000 [ 6.551557] igb 0005:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.553138] igb 0005:05:00.0: Adding to iommu group 8 [ 6.554012] igb 0005:05:00.0: enabling device (0000 -> 0002) [ 6.596471] pps pps2: new PPS source ptp2 [ 6.597155] igb 0005:05:00.0: added PHC on eth2 [ 6.597385] igb 0005:05:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.597701] igb 0005:05:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 8c:f3:19:35:1c:c7 [ 6.598073] igb 0005:05:00.0: eth2: PBA No: 000500-000 [ 6.598264] igb 0005:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.624473] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.629128] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.630111] host1x 13e10000.host1x: Adding to iommu group 9 [ 6.654143] host1x 13e10000.host1x: initialized [ 6.655516] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 10 [ 6.656543] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.657704] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 11 [ 6.658298] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.659211] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 12 [ 6.659795] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.665765] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 13 [ 6.672524] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.682454] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 14 [ 6.688941] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.699142] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 15 [ 6.706383] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.716468] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 16 [ 6.723327] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.733192] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 17 [ 6.740314] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.750131] falcon 15340000.vic: Adding to iommu group 18 [ 6.764358] falcon 15340000.vic: initialized [ 6.765258] falcon 15380000.nvjpg: Adding to iommu group 18 [ 6.770747] falcon 15380000.nvjpg: initialized [ 6.771270] falcon 154c0000.nvenc: Adding to iommu group 18 [ 6.783610] falcon 154c0000.nvenc: initialized [ 6.784315] falcon 15a80000.nvenc1: Adding to iommu group 18 [ 6.793594] falcon 15a80000.nvenc1: initialized [ 6.794353] nvdec 15480000.nvdec: Adding to iommu group 18 [ 6.805942] nvdec 15480000.nvdec: initialized [ 6.806472] nvdec 15140000.nvdec1: Adding to iommu group 18 [ 6.816651] nvdec 15140000.nvdec1: initialized [ 6.817181] tsec 15500000.tsec: Adding to iommu group 19 [ 6.823069] tsec 15500000.tsec: initialized [ 6.823648] tsec 15100000.tsecb: Adding to iommu group 20 [ 6.830109] tsec 15100000.tsecb: initialized [ 6.834348] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.853724] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.866079] gpio-374 (wifi-enable): hogged as output/high [ 6.866361] gpio-431 (camera-control-output-low): hogged as output/low [ 6.866617] gpio-432 (camera-control-output-low): hogged as output/low [ 6.866905] gpio-440 (DI_0): hogged as input [ 6.867097] gpio-438 (DI_1): hogged as input [ 6.870271] gpio-427 (WWAN_RST_N): hogged as output/high [ 6.877477] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.883333] gpio-317 (DI_2): hogged as input [ 6.886411] gpio-318 (DI_3): hogged as input [ 6.890613] gpio-319 (DO_0): hogged as output/low [ 6.895515] gpio-320 (DO_1): hogged as output/low [ 6.900267] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.906932] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.913613] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.919405] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.925133] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.930472] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.939011] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.946136] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 21 [ 6.957260] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.962368] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.968387] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.976997] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.986571] tegra194-vi5 15c10000.vi: Adding to iommu group 22 [ 6.993187] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 7.001086] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 7.007370] scare-pigeon 13e10000.host1x:vi-thi@15f00000: grid-of-semaphores not supported [ 7.016010] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 7.025156] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 7.031316] scare-pigeon 13e10000.host1x:isp-thi@14b00000: grid-of-semaphores not supported [ 7.039945] pva 16000000.pva0: Adding to iommu group 23 [ 7.065976] pva 16000000.pva0: initialized [ 7.070742] pva 16800000.pva1: Adding to iommu group 24 [ 7.092499] pva 16800000.pva1: initialized [ 7.097497] nvdla 15880000.nvdla0: Adding to iommu group 25 [ 7.111203] nvdla 15880000.nvdla0: initialized [ 7.112598] nvdla 158c0000.nvdla1: Adding to iommu group 26 [ 7.123019] nvdla 158c0000.nvdla1: initialized [ 7.128408] tegradccommon 15200000.display-hub: host1x channel mapped [ 7.128711] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 7.128819] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=64 [ 7.129102] tegradccommon 15200000.display-hub: dma mapping done [ 7.129546] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 7.129997] tegradc 15200000.display: Adding to iommu group 27 [ 7.130045] tegradc 15210000.display: Adding to iommu group 27 [ 7.131159] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 7.132027] tegradc 15210000.display: disp0 connected to head1->sor [ 7.133960] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 7.136621] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.141987] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 7.149326] tegradc 15210000.display: DT parsed successfully [ 7.154699] tegra_cec 3960000.tegra_cec: probed [ 7.155632] kfuse 3830000.kfuse: initialized [ 7.160330] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=0 [ 7.165671] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 7.172651] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 7.177647] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 7.178444] serial-tegra 3100000.serial: Adding to iommu group 2 [ 7.183991] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 7.183999] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 7.185082] tegradc 15210000.display: vblank syncpt # 8 for dc 1 [ 7.193166] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 7.198791] tegradc 15210000.display: vpulse3 syncpt # 9 for dc 1 [ 7.215378] tegradc 15210000.display: probed [ 7.222927] serial-tegra 3110000.serial: Adding to iommu group 2 [ 7.252962] Console: switching to colour frame buffer device 80x30 [ 7.253398] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 7.258209] tegradc 15210000.display: fb registered [ 7.268417] serial-tegra 3140000.serial: Adding to iommu group 2 [ 7.278981] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 7.289980] Reserved SVD code 117 [ 7.290503] Reserved SVD code 118 [ 7.299769] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 7.303459] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.303880] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.309034] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.309117] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 7.310045] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 7.315716] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 7.320946] tegra-xusb 3610000.xhci: irq 190, io mem 0x03610000 [ 7.349917] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.352003] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 7.357332] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.373078] usb usb1: Product: xHCI Host Controller [ 7.374481] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 7.378034] usb usb1: Manufacturer: Linux 5.10.65 xhci-hcd [ 7.378042] usb usb1: SerialNumber: 3610000.xhci [ 7.378642] hub 1-0:1.0: USB hub found [ 7.386621] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 7.390593] hub 1-0:1.0: 4 ports detected [ 7.399920] dp lt: state 0 (Reset), pending_lt_evt 1 [ 7.406539] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.410159] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 7.410176] dp lt: state 0 (Reset), pending_lt_evt 0 [ 7.415155] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 7.423068] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 7.427308] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 7.427628] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 7.432203] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 7.432718] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 7.439467] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.439506] usb usb2: Product: xHCI Host Controller [ 7.446729] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 7.446749] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 7.453991] usb usb2: Manufacturer: Linux 5.10.65 xhci-hcd [ 7.454008] usb usb2: SerialNumber: 3610000.xhci [ 7.462340] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 7.468674] hub 2-0:1.0: USB hub found [ 7.474903] dp lt: tx_pu: 0x20 [ 7.497158] dp lt: CR not done [ 7.500232] hub 2-0:1.0: 4 ports detected [ 7.506915] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 7.518647] pca953x 1-0023: using no AI [ 7.521188] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 7.521195] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 7.521200] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 7.521218] dp lt: CR retry [ 7.525028] gpio-293 (wifi-disable): hogged as output/high [ 7.527254] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 7.531886] gpio-294 (bt-disable): hogged as output/high [ 7.538693] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 7.538717] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 7.543189] gpio-296 (wwan_pwr_off): hogged as output/high [ 7.550149] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 7.550159] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 7.550167] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 7.550218] dp lt: tx_pu: 0x40 [ 7.557956] gpio-297 (wwan_disable): hogged as output/high [ 7.589186] dp lt: CR done [ 7.592304] gpiochip3: registered GPIOs 289 to 304 on 1-0023 [ 7.598568] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 7.598581] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 7.615148] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 7.643198] dp lt: CE done [ 7.651682] i2c-mux-gpio cam_i2cmux: no valid gpios provided [ 7.655592] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 7.655693] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 7.661140] i2c-mux-gpio: probe of cam_i2cmux failed with error -2 [ 7.664190] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 7.664245] Extcon AUX0(DP): enable [ 7.664321] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 7.666360] random: crng init done [ 7.666625] tegradc 15200000.display: disp1 connected to head0->sor1 [ 7.666679] generic_infoframe_type: 0x87 [ 7.666724] tegradc 15200000.display: DT parsed successfully [ 7.666756] tegradc 15200000.display: Display dc.0000000074730f29 registered with id=1 [ 7.666850] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 7.666857] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 7.668046] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.668051] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.669967] tegradc 15200000.display: probed [ 7.679009] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 7.679141] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1902000 KHz, changing to: 1907200 KHz [ 7.688032] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 7.688764] irq: IRQ292: trimming hierarchy from :pmc@c360000 [ 7.689027] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 7.689300] sdhci-tegra 3440000.sdhci: BWMGR client registration for eMC Successful [ 7.691429] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 7.692859] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 7.698017] tegra194-vi5 15c10000.vi: initialized [ 7.699421] nvethernet 2490000.ethernet: Adding to iommu group 28 [ 7.709867] mmc0: CQHCI version 5.10 [ 7.713621] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 7.734066] irq: IRQ293: trimming hierarchy from :pmc@c360000 [ 7.737241] nvethernet 2490000.ethernet: failed to read MDIO address [ 7.737252] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 7.737263] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 7.743986] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit [ 7.749994] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 7.756238] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 7.756451] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 7.796201] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 7.801700] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 7.806693] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 7.812169] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 7.812754] usb 1-2: New USB device found, idVendor=04b4, idProduct=6506, bcdDevice=50.00 [ 7.812762] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.814032] hub 1-2:1.0: USB hub found [ 7.814110] hub 1-2:1.0: 4 ports detected [ 7.814438] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 7.833104] Reserved SVD code 117 [ 7.833108] Reserved SVD code 118 [ 7.842114] mmc0: Command Queue Engine enabled [ 7.842421] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 7.844448] ether_get_mac_address_dtb: bad mac address at /chosen/nvidia,ether-mac: NULL. [ 7.851025] mmc0: periodic cache flush enabled [ 7.856590] nvethernet 2490000.ethernet: No MAC address in local DT! [ 7.856595] nvethernet 2490000.ethernet: failed to get MAC address [ 7.857564] nvethernet: probe of 2490000.ethernet failed with error -22 [ 7.862978] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.863591] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.870659] irq: IRQ295: trimming hierarchy from :pmc@c360000 [ 7.876675] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (509:0) [ 7.884278] irq: IRQ296: trimming hierarchy from :interrupt-controller@3881000 [ 7.902127] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.905107] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.952400] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using tegra-xusb [ 7.954993] tegra-se-nvhost 15810000.se: Adding to iommu group 29 [ 7.984833] usb 2-3: New USB device found, idVendor=04b4, idProduct=6504, bcdDevice=50.00 [ 7.990356] tegra-se-nvhost 15810000.se: initialized [ 7.993094] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.995236] hub 2-3:1.0: USB hub found [ 8.001150] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 8.005768] hub 2-3:1.0: 4 ports detected [ 8.013095] tegra-se-nvhost 15820000.se: Adding to iommu group 30 ▒▒WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ▒▒[ 8.112622] tegradc 15200000.display: fb registered [ 8.112682] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.112692] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112698] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112704] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112727] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112733] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112738] irq: IRQ297: trimming hierarchy from :pmc@c360000 [ 8.112742] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112748] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112754] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112760] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112766] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112772] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112778] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112783] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112789] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112795] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112816] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112824] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112830] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112836] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112842] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112848] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.112855] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.112862] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.112869] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.112893] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 8.112901] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112907] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112914] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112920] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112927] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112934] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112944] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112951] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112958] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112965] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112972] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112979] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112985] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112992] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.112999] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.113005] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.113012] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.113019] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.113026] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.113033] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.113040] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.113050] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.113058] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.113065] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.113072] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.113076] tegradc 15210000.display: mode bw=30729816000 > link bw=25920000000 [ 8.113082] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.113086] tegradc 15210000.display: mode bw=31914888000 > link bw=25920000000 [ 8.113092] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.113100] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.113107] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.113114] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.113122] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.113129] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.113136] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.113144] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.113151] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.113158] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.113166] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.113173] tegradc 15210000.display: blank - powerdown [ 8.113338] tegra-se-nvhost 15820000.se: initialized [ 8.115333] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 8.115788] tegra-se-nvhost 15830000.se: Adding to iommu group 31 [ 8.116510] tegra-se-nvhost 15830000.se: initialized [ 8.117689] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 8.118106] tegra-se-nvhost 15840000.se: Adding to iommu group 32 [ 8.118740] tegra-se-nvhost 15840000.se: initialized [ 8.120537] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 8.121767] tegra_actmon d230000.actmon: in actmon_register()... [ 8.121928] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 8.122260] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 8.122749] hvc_sysfs: hypervisor is not present [ 8.148694] ALSA device list: [ 8.148700] No soundcards found. [ 8.159978] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 8.159982] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 8.159987] dp lt: state 0 (Reset), pending_lt_evt 0 [ 8.159993] dp lt: link training force disable [ 8.159997] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 8.160228] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 8.160236] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 8.182050] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 8.182054] Extcon AUX0(DP) disable [ 8.183910] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 8.184073] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 8.185079] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 8.185136] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.185228] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.224166] tegradc 15210000.display: unblank [ 8.225513] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 8.225714] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 8.225940] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 8.231837] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.243661] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 8.243665] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 8.243670] dp lt: state 0 (Reset), pending_lt_evt 0 [ 8.245800] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 8.245806] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 8.246265] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 8.246272] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 8.246278] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 8.246283] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 8.246288] dp lt: tx_pu: 0x20 [ 8.246778] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 8.269067] dp lt: CR not done [ 8.269973] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 8.269984] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 8.269987] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 8.269990] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 8.269992] dp lt: CR retry [ 8.269995] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 8.270000] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 8.270008] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 8.270014] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 8.270019] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 8.270025] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 8.270030] dp lt: tx_pu: 0x40 [ 8.293058] dp lt: CR done [ 8.293063] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 8.293068] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 8.317533] dp lt: CE not done [ 8.318459] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 8.318463] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 8.318466] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 8.318468] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 8.318475] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 8.318480] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 8.318486] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 8.318491] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 8.318502] dp lt: tx_pu: 0x60 [ 8.319006] dp lt: CE retry [ 8.319010] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 8.319015] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 8.343144] dp lt: CE done [ 8.343150] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 8.343204] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 8.343208] Extcon AUX0(DP): enable [ 8.359844] tegradc 15210000.display: sync windows ret = 246 [ 8.804436] usb 2-3.1: new SuperSpeed Gen 1 USB device number 3 using tegra-xusb [ 9.298268] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.298277] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298284] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298290] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298296] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298301] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298327] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298333] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298339] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298344] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298350] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298356] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298362] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298368] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298373] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298379] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298385] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298406] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298413] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298419] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298425] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298433] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.298440] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.298447] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.298453] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.298459] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 9.298466] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298495] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298505] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298516] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298525] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298534] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298542] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298551] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298559] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298568] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298577] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298585] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298594] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298602] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298611] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298620] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298628] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298649] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298663] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298671] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298678] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.298688] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.298700] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.298708] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.298715] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.298719] tegradc 15210000.display: mode bw=30729816000 > link bw=25920000000 [ 9.298725] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.298729] tegradc 15210000.display: mode bw=31914888000 > link bw=25920000000 [ 9.298735] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.298742] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.298750] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.298757] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.298764] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.298772] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.298779] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.298786] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.298794] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.298801] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.298809] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.298815] tegradc 15210000.display: blank - powerdown [ 9.318224] usb 2-3.1: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10 [ 9.318232] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.318247] usb 2-3.1: Product: DataTraveler 3.0 [ 9.318252] usb 2-3.1: Manufacturer: Kingston [ 9.318256] usb 2-3.1: SerialNumber: E0D55E6CBD0FE52109690063 [ 9.320225] usb-storage 2-3.1:1.0: USB Mass Storage device detected [ 9.320747] scsi host0: usb-storage 2-3.1:1.0 [ 9.343273] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 9.343278] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 9.343283] dp lt: state 0 (Reset), pending_lt_evt 0 [ 9.343288] dp lt: link training force disable [ 9.343310] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 9.365031] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 9.365035] Extcon AUX0(DP) disable [ 9.366648] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 9.366807] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 9.367801] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 9.367890] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.367921] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.383232] tegradc 15210000.display: unblank [ 9.384586] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 9.384776] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 9.385023] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 9.390923] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.396203] usb 1-2.3: new high-speed USB device number 4 using tegra-xusb [ 9.402396] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 9.402401] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 9.402406] dp lt: state 0 (Reset), pending_lt_evt 0 [ 9.404529] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 9.404536] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 9.404995] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 9.405002] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 9.405008] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 9.405014] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 9.405019] dp lt: tx_pu: 0x20 [ 9.405536] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 9.429055] dp lt: CR not done [ 9.429962] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 9.429968] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 9.429971] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 9.429974] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 9.429976] dp lt: CR retry [ 9.429979] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 9.429984] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 9.429992] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 9.429998] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 9.430003] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 9.430009] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 9.430013] dp lt: tx_pu: 0x40 [ 9.453062] dp lt: CR done [ 9.453066] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 9.453071] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 9.477507] dp lt: CE not done [ 9.478429] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 9.478432] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 9.478435] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 9.478438] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 9.478444] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 9.478450] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 9.478455] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 9.478461] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 9.478465] dp lt: tx_pu: 0x60 [ 9.478950] dp lt: CE retry [ 9.478954] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 9.478974] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 9.503009] dp lt: CE done [ 9.503014] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 9.503075] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 9.503078] Extcon AUX0(DP): enable [ 9.510259] usb 1-2.3: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 [ 9.510282] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.510288] usb 1-2.3: Product: 4-Port USB 2.0 Hub [ 9.510292] usb 1-2.3: Manufacturer: Generic [ 9.511998] hub 1-2.3:1.0: USB hub found [ 9.512939] hub 1-2.3:1.0: 4 ports detected [ 9.519720] tegradc 15210000.display: sync windows ret = 246 [ 9.580942] usb 2-3.3: new SuperSpeed Gen 1 USB device number 4 using tegra-xusb [ 10.442924] extcon-disp-state external-connection:disp-state: cable 44 state 1 [ 10.443727] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [ 10.443818] Freeing unused kernel memory: 3840K [ 10.443916] Run /init as init process [ 10.450024] Extcon DP: HPD enabled [ 10.459104] sd 0:0:0:0: [sda] 121208832 512-byte logical blocks: (62.1 GB/57.8 GiB) [ 10.462501] hpd: switching from state 2 (Check EDID) to state 4 (Enabled) [ 10.477359] usb 2-3.3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 [ 10.477846] sd 0:0:0:0: [sda] Write Protect is off [ 10.483875] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.483882] usb 2-3.3: Product: 4-Port USB 3.0 Hub [ 10.497324] usb 2-3.3: Manufacturer: Generic [ 10.504963] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 10.517071] hub 2-3.3:1.0: USB hub found [ 10.529397] hub 2-3.3:1.0: 4 ports detected [ 10.552252] usb 1-2.3.1: new high-speed USB device number 5 using tegra-xusb [ 10.672868] usb 1-2.3.1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 [ 10.674976] usb 1-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.676937] usb 1-2.3.1: Product: 4-Port USB 2.0 Hub [ 10.678820] usb 1-2.3.1: Manufacturer: Generic [ 10.682771] hub 1-2.3.1:1.0: USB hub found [ 10.685842] hub 1-2.3.1:1.0: 4 ports detected [ 10.776205] usb 1-2.3.3: new full-speed USB device number 6 using tegra-xusb [ 10.804374] sda: sda1 sda2 [ 10.808948] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 10.882533] usb 1-2.3.3: New USB device found, idVendor=046d, idProduct=c336, bcdDevice= 9.00 [ 10.886356] usb 1-2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.888606] usb 1-2.3.3: Product: Gaming Keyboard G213 [ 10.890673] usb 1-2.3.3: Manufacturer: Logitech [ 10.892752] usb 1-2.3.3: SerialNumber: 085F39523435 [ 10.898820] input: Logitech Gaming Keyboard G213 as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.0/0003:046D:C336.0001/input/input1 [ 10.960524] hid-generic 0003:046D:C336.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G213] on usb-3610000.xhci-2.3.3/input0 [ 10.963032] usb 2-3.3.1: new SuperSpeed Gen 1 USB device number 5 using tegra-xusb [ 10.965020] input: Logitech Gaming Keyboard G213 Keyboard as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.1/0003:046D:C336.0002/input/input2 [ 10.998471] usb 2-3.3.1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 [ 11.000892] usb 2-3.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.003126] usb 2-3.3.1: Product: 4-Port USB 3.0 Hub [ 11.005319] usb 2-3.3.1: Manufacturer: Generic [ 11.016769] hub 2-3.3.1:1.0: USB hub found [ 11.022358] hub 2-3.3.1:1.0: 4 ports detected [ 11.024481] input: Logitech Gaming Keyboard G213 Consumer Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.1/0003:046D:C336.0002/input/input3 [ 11.027644] hid-generic 0003:046D:C336.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G213] on usb-3610000.xhci-2.3.3/input1 [ 11.108222] usb 1-2.3.4: new full-speed USB device number 7 using tegra-xusb [ 11.210412] usb 1-2.3.4: New USB device found, idVendor=046d, idProduct=c084, bcdDevice= 7.03 [ 11.212984] usb 1-2.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.215325] usb 1-2.3.4: Product: G102 Prodigy Gaming Mouse [ 11.217694] usb 1-2.3.4: Manufacturer: Logitech [ 11.220074] usb 1-2.3.4: SerialNumber: 0F6D386A3134 [ 11.226293] input: Logitech G102 Prodigy Gaming Mouse as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.0/0003:046D:C084.0003/input/input6 [ 11.229281] hid-generic 0003:046D:C084.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G102 Prodigy Gaming Mouse] on usb-3610000.xhci-2.3.4/input0 [ 11.234018] input: Logitech G102 Prodigy Gaming Mouse Keyboard as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/0003:046D:C084.0004/input/input7 [ 11.296527] input: Logitech G102 Prodigy Gaming Mouse Consumer Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/0003:046D:C084.0004/input/input8 [ 11.299611] input: Logitech G102 Prodigy Gaming Mouse System Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/0003:046D:C084.0004/input/input9 [ 11.304338] hid-generic 0003:046D:C084.0004: input,hiddev97,hidraw3: USB HID v1.11 Keyboard [Logitech G102 Prodigy Gaming Mouse] on usb-3610000.xhci-2.3.4/input1 [ 11.330729] igb 0005:03:00.0 enP5p3s0: renamed from eth0 [ 11.347934] tegra-qspi 3270000.spi: Adding to iommu group 2 [ 11.347966] spi-tegra114 3210000.spi: Adding to iommu group 2 [ 11.357578] igb 0005:04:00.0 enP5p4s0: renamed from eth1 [ 11.358379] spi-tegra114 3230000.spi: Adding to iommu group 2 [ 11.396537] igb 0005:05:00.0 enP5p5s0: renamed from eth2 [ 11.906340] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 12.190205] systemd[1]: System time before build time, advancing clock. [ 12.256304] systemd[1]: systemd 251.3-1~bpo11+1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 12.259728] systemd[1]: Detected architecture arm64. [ 12.276375] systemd[1]: Hostname set to . [ 12.608642] systemd[1]: /etc/systemd/system/nvs-service.service:38: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 12.620977] systemd[1]: /etc/systemd/system/nvargus-daemon.service:40: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 12.699636] systemd[1]: Queued start job for default target Graphical Interface. [ 12.707634] systemd[1]: Created slice Slice /system/getty. [ 12.715321] systemd[1]: Created slice Slice /system/modprobe. [ 12.722625] systemd[1]: Created slice Slice /system/serial-getty. [ 12.729663] systemd[1]: Created slice User and Session Slice. [ 12.736609] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 12.743495] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.751765] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 12.758023] systemd[1]: Reached target Local Encrypted Volumes. [ 12.764096] systemd[1]: Reached target Local Integrity Protected Volumes. [ 12.770218] systemd[1]: Reached target Path Units. [ 12.776264] systemd[1]: Reached target Remote Encrypted Volumes. [ 12.782222] systemd[1]: Reached target Remote File Systems. [ 12.788295] systemd[1]: Reached target Remote Verity Protected Volumes. [ 12.794476] systemd[1]: Reached target Slice Units. [ 12.800678] systemd[1]: Reached target Swaps. [ 12.806801] systemd[1]: Reached target Local Verity Protected Volumes. [ 12.813264] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 12.820282] systemd[1]: Listening on Journal Audit Socket. [ 12.827062] systemd[1]: Listening on Journal Socket (/dev/log). [ 12.833880] systemd[1]: Listening on Journal Socket. [ 12.840903] systemd[1]: Listening on Network Service Netlink Socket. [ 12.847895] systemd[1]: Listening on udev Control Socket. [ 12.854690] systemd[1]: Listening on udev Kernel Socket. [ 12.864892] systemd[1]: Mounting Huge Pages File System... [ 12.875406] systemd[1]: Mounting POSIX Message Queue File System... [ 12.886256] systemd[1]: Mounting Kernel Debug File System... [ 12.897106] systemd[1]: Mounting Kernel Trace File System... [ 12.907931] systemd[1]: Starting Wait for network to be configured by ifupdown... [ 12.920115] systemd[1]: Starting Create List of Static Device Nodes... [ 12.932706] systemd[1]: Starting Load Kernel Module configfs... [ 12.943451] systemd[1]: Starting Load Kernel Module drm... [ 12.953883] systemd[1]: Starting Load Kernel Module fuse... [ 12.964288] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 12.970851] fuse: init (API version 7.32) [ 12.981286] systemd[1]: Starting Journal Service... [ 12.997090] systemd[1]: Starting Load Kernel Modules... [ 13.007166] systemd[1]: Starting Generate network units from Kernel command line... [ 13.017543] systemd[1]: Starting Remount Root and Kernel File Systems... [ 13.024692] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed. [ 13.031943] systemd[1]: Starting Coldplug All udev Devices... [ 13.038545] EXT4-fs (sda2): re-mounted. Opts: (null) [ 13.052579] systemd[1]: Mounted Huge Pages File System. [ 13.062329] systemd[1]: Mounted POSIX Message Queue File System. [ 13.069861] systemd[1]: Mounted Kernel Debug File System. [ 13.077168] systemd[1]: Mounted Kernel Trace File System. [ 13.084977] systemd[1]: Finished Create List of Static Device Nodes. [ 13.093213] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 13.098784] systemd[1]: Finished Load Kernel Module configfs. [ 13.106810] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 13.110894] systemd[1]: Finished Load Kernel Module drm. [ 13.118998] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 13.123354] systemd[1]: Finished Load Kernel Module fuse. [ 13.131544] systemd[1]: nvfb-udev.service: Deactivated successfully. [ 13.135625] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 13.143450] systemd[1]: Finished Load Kernel Modules. [ 13.151152] systemd[1]: Finished Generate network units from Kernel command line. [ 13.159085] systemd[1]: Finished Remount Root and Kernel File Systems. [ 13.166933] systemd[1]: Reached target Preparation for Network. [ 13.177494] systemd[1]: Mounting FUSE Control File System... [ 13.187506] systemd[1]: Mounting Kernel Configuration File System... [ 13.194474] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 13.203162] systemd[1]: Starting Load/Save Random Seed... [ 13.213780] systemd[1]: Starting Apply Kernel Variables... [ 13.224303] systemd[1]: Starting Create System Users... [ 13.238209] systemd[1]: Mounted FUSE Control File System. [ 13.245215] systemd[1]: Mounted Kernel Configuration File System. [ 13.451680] systemd[1]: Started Journal Service. [ 15.802728] systemd-journald[329]: Received client request to flush runtime journal. [ 15.834431] systemd-journald[329]: File /var/log/journal/54b542dac69b4fc5a83962584d3d8b1a/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 16.457183] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 16.460247] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 16.651810] cpu-throttle-alert cooling device registered. [ 16.655380] gpu-throttle-alert cooling device registered. [ 16.663113] aux-throttle-alert cooling device registered. [ 16.667596] hot-surface-alert cooling device registered. [ 16.691279] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 16 channels [ 16.711185] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 16.711185] [ 16.719394] nvgpu: 17000000.gv11b nvgpu_read_support_gpu_tools:62 [INFO] Missing support-gpu-tools property, ret =-22 [ 16.723139] tegra-hda 3510000.hda: Adding to iommu group 33 [ 16.735258] tegra-hda 3510000.hda: Override SDO lines to 4 [ 16.750834] nvadsp 2993000.adsp: Adding to iommu group 34 [ 16.755192] nvadsp 2993000.adsp: in probe()... [ 16.760388] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 16.763696] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 16.766608] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 16.800880] nvadsp 2993000.adsp: nvadsp_app_module_probe [ 16.801810] input: NVIDIA Jetson Xavier NX HDA HDMI/DP,pcm=3 as /devices/platform/3510000.hda/sound/card0/input12 [ 16.807802] input: NVIDIA Jetson Xavier NX HDA HDMI/DP,pcm=7 as /devices/platform/3510000.hda/sound/card0/input13 [ 16.811647] 1 fixed-partitions partitions found on MTD device spi6.0 [ 16.814537] Creating 1 MTD partitions on "spi6.0": [ 16.820509] 0x000000000000-0x000002000000 : "Whole_flash0" [ 16.826888] input: NVIDIA Jetson Xavier NX HDA HDMI/DP,pcm=8 as /devices/platform/3510000.hda/sound/card0/input14 [ 16.831084] input: NVIDIA Jetson Xavier NX HDA HDMI/DP,pcm=9 as /devices/platform/3510000.hda/sound/card0/input15 [ 16.847325] tegra210-adsp aconnect@2a41000:adsp_audio: Adding to iommu group 34 [ 16.850741] tegra210_adsp_audio_probe: platform probe started [ 16.854972] tegra210-adsp tegra210-adsp: Default param-type to BYTE for mp3-dec1 [ 16.860599] tegra210-adsp tegra210-adsp: Default param-type to BYTE for spkprot [ 16.864537] tegra210-adsp tegra210-adsp: Default param-type to BYTE for src [ 16.868347] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aac-dec1 [ 16.869088] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aec [ 16.870220] tegra210-adsp tegra210-adsp: Default param-type to BYTE for wire [ 16.870228] tegra210-adsp tegra210-adsp: adma channel page address dt entry not found [ 16.870232] tegra210-adsp tegra210-adsp: using adma channel page 0 [ 16.870351] nvadsp 2993000.adsp: ADSP OS firmware already loaded [ 16.882742] tegra-asoc: sound: Adding to iommu group 34 [ 16.981846] cfg80211: failed to load regulatory.db [ 17.053315] cryptd: max_cpu_qlen set to 1000 [ 17.091457] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 17.959950] using random self ethernet address [ 17.963944] using random host ethernet address [ 18.216827] loop: module loaded [ 20.921298] IRQ231: set affinity failed(-22). [ 20.921432] IRQ232: set affinity failed(-22). [ 20.921533] IRQ233: set affinity failed(-22). [ 20.921656] IRQ234: set affinity failed(-22). [ 20.921760] IRQ235: set affinity failed(-22). [ 20.921857] IRQ236: set affinity failed(-22). [ 20.921950] IRQ237: set affinity failed(-22). [ 20.922044] IRQ238: set affinity failed(-22). [ 20.922141] IRQ239: set affinity failed(-22). [ 20.922237] IRQ240: set affinity failed(-22). [ 20.923484] CPU4: shutdown [ 20.926068] psci: CPU4 killed (polled 0 ms) [ 20.951647] Mass Storage Function, version: 2009/09/11 [ 20.955519] LUN: removable file: (no medium) [ 20.969685] using random self ethernet address [ 20.974114] using random host ethernet address [ 20.977951] CPU5: shutdown [ 20.980417] psci: CPU5 killed (polled 0 ms) [ 20.987510] nvgpu: 17000000.gv11b tpc_pg_mask_store:1042 [INFO] no value change, same mask already set [ 21.024471] rndis0: HOST MAC 62:c5:13:ef:0a:c8 [ 21.032582] rndis0: MAC 62:c5:13:ef:0a:c9 [ 21.039768] usb0: HOST MAC 62:c5:13:ef:0a:ca [ 21.043491] usb0: MAC 62:c5:13:ef:0a:cb [ 21.046961] tegra-xudc 3550000.xudc: EP 0 (type: ctrl, dir: out) enabled [ 21.059306] l4tbr0: port 1(rndis0) entered blocking state [ 21.061952] l4tbr0: port 1(rndis0) entered disabled state [ 21.065531] device rndis0 entered promiscuous mode [ 21.087172] l4tbr0: port 2(usb0) entered blocking state [ 21.089730] l4tbr0: port 2(usb0) entered disabled state [ 21.092229] device usb0 entered promiscuous mode [ 21.984241] nvadsp 2993000.adsp: ADSP OS loading timed out [ 21.987415] nvadsp 2993000.adsp: Unable to start ADSP OS [ 21.990381] nvadsp 2993000.adsp: adsp failed to boot with ret = -62 [ 21.993409] nvadsp 2993000.adsp: Dumping ADSP logs ........ [ 21.996007] nvadsp 2993000.adsp: End of ADSP log dump ..... [ 21.999677] nvadsp 2993000.adsp: dumping hwmailbox registers ... [ 22.003115] nvadsp 2993000.adsp: recv_hwmbox(): 0x0 [ 22.006126] nvadsp 2993000.adsp: send_hwmbox(): 0x19 [ 22.008290] nvadsp 2993000.adsp: dumping fault frame... [ 22.010421] nvadsp 2993000.adsp: r0 0x00000000 r1 0x00000000 r2 0x00000000 r3 0x00000000 [ 22.012670] nvadsp 2993000.adsp: r4 0x00000000 r5 0x00000000 r6 0x00000000 r7 0x00000000 [ 22.015304] nvadsp 2993000.adsp: r8 0x00000000 r9 0x00000000 r10 0x00000000 r11 0x00000000 [ 22.018064] nvadsp 2993000.adsp: r12 0x00000000 usp 0x00000000 ulr 0x00000000 pc 0x00000000 [ 22.020785] nvadsp 2993000.adsp: spsr 0x00000000 [ 22.022980] nvadsp 2993000.adsp: dumping arm mode register data... [ 22.025249] nvadsp 2993000.adsp: fiq r13 0x00000000 r14 0x00000000 [ 22.027431] nvadsp 2993000.adsp: irq r13 0x00000000 r14 0x00000000 [ 22.029572] nvadsp 2993000.adsp: svc r13 0x00000000 r14 0x00000000 [ 22.031663] nvadsp 2993000.adsp: und r13 0x00000000 r14 0x00000000 [ 22.033875] nvadsp 2993000.adsp: sys r13 0x00000000 r14 0x00000000 [ 22.035913] nvadsp 2993000.adsp: abt r13 0x00000000 r14 0x00000000 [ 22.038020] nvadsp 2993000.adsp: get_adsp_state: adsp state hwmbox value: 0x0 [ 22.040074] nvadsp 2993000.adsp: get_adsp_state: Unrecognized ADSP state!! [ 22.043836] nvadsp 2993000.adsp: dump_thread_name: adsp current thread: [ 22.050429] nvadsp 2993000.adsp: dump_irq_num: adsp current/last irq : 0 [ 22.057501] nvadsp 2993000.adsp: irq 32 is not pending and not active [ 22.063531] nvadsp 2993000.adsp: irq 33 is not pending and not active [ 22.069916] nvadsp 2993000.adsp: irq 34 is not pending and not active [ 22.076677] nvadsp 2993000.adsp: irq 35 is not pending and not active [ 22.082694] nvadsp 2993000.adsp: irq 36 is not pending and not active [ 22.089434] nvadsp 2993000.adsp: irq 37 is not pending and not active [ 22.095762] nvadsp 2993000.adsp: irq 38 is not pending and not active [ 22.102047] nvadsp 2993000.adsp: irq 39 is not pending and not active [ 22.108561] nvadsp 2993000.adsp: irq 40 is not pending and not active [ 22.115065] nvadsp 2993000.adsp: irq 41 is not pending and not active [ 22.121697] nvadsp 2993000.adsp: irq 42 is not pending and not active [ 22.127858] nvadsp 2993000.adsp: irq 43 is not pending and not active [ 22.134570] nvadsp 2993000.adsp: irq 44 is not pending and not active [ 22.140893] nvadsp 2993000.adsp: irq 45 is not pending and not active [ 22.147525] nvadsp 2993000.adsp: irq 46 is not pending and not active [ 22.153850] nvadsp 2993000.adsp: irq 47 is not pending and not active [ 22.160489] nvadsp 2993000.adsp: irq 48 is not pending and not active [ 22.166954] nvadsp 2993000.adsp: irq 49 is not pending and not active [ 22.173277] nvadsp 2993000.adsp: irq 50 is not pending and not active [ 22.179898] nvadsp 2993000.adsp: irq 51 is not pending and not active [ 22.186371] nvadsp 2993000.adsp: irq 52 is not pending and not active [ 22.192662] nvadsp 2993000.adsp: irq 53 is not pending and not active [ 22.199343] nvadsp 2993000.adsp: irq 54 is not pending and not active [ 22.205864] nvadsp 2993000.adsp: irq 55 is not pending and not active [ 22.212293] nvadsp 2993000.adsp: irq 56 is not pending and not active [ 22.218766] nvadsp 2993000.adsp: irq 57 is not pending and not active [ 22.225319] nvadsp 2993000.adsp: irq 58 is not pending and not active [ 22.231442] nvadsp 2993000.adsp: irq 59 is not pending and not active [ 22.238290] nvadsp 2993000.adsp: irq 60 is not pending and not active [ 22.244662] nvadsp 2993000.adsp: irq 61 is not pending and not active [ 22.250864] nvadsp 2993000.adsp: irq 62 is not pending and not active [ 22.257681] nvadsp 2993000.adsp: irq 63 is not pending and not active [ 22.263835] nvadsp 2993000.adsp: irq 64 is not pending and not active [ 22.270286] nvadsp 2993000.adsp: irq 65 is not pending and not active [ 22.276859] nvadsp 2993000.adsp: irq 66 is not pending and not active [ 22.283497] nvadsp 2993000.adsp: irq 67 is not pending and not active [ 22.290058] nvadsp 2993000.adsp: irq 68 is not pending and not active [ 22.296477] nvadsp 2993000.adsp: irq 69 is not pending and not active [ 22.302921] nvadsp 2993000.adsp: irq 70 is not pending and not active [ 22.309467] nvadsp 2993000.adsp: irq 71 is not pending and not active [ 22.315639] nvadsp 2993000.adsp: irq 72 is pending and not active [ 22.321901] nvadsp 2993000.adsp: irq 73 is not pending and not active [ 22.328557] nvadsp 2993000.adsp: irq 74 is pending and not active [ 22.334515] nvadsp 2993000.adsp: irq 75 is pending and not active [ 22.341071] nvadsp 2993000.adsp: irq 76 is pending and not active [ 22.346940] nvadsp 2993000.adsp: irq 77 is pending and not active [ 22.353407] nvadsp 2993000.adsp: irq 78 is pending and not active [ 22.359727] nvadsp 2993000.adsp: irq 79 is pending and not active [ 22.365585] nvadsp 2993000.adsp: irq 80 is not pending and not active [ 22.372381] nvadsp 2993000.adsp: irq 81 is not pending and not active [ 22.378593] nvadsp 2993000.adsp: irq 82 is not pending and not active [ 22.385055] nvadsp 2993000.adsp: irq 83 is not pending and not active [ 22.391554] nvadsp 2993000.adsp: irq 84 is not pending and not active [ 22.397873] nvadsp 2993000.adsp: irq 85 is not pending and not active [ 22.404323] nvadsp 2993000.adsp: irq 86 is not pending and not active [ 22.410923] nvadsp 2993000.adsp: irq 87 is not pending and not active [ 22.417060] nvadsp 2993000.adsp: irq 88 is not pending and not active [ 22.423512] nvadsp 2993000.adsp: irq 89 is not pending and not active [ 22.430058] nvadsp 2993000.adsp: irq 90 is not pending and not active [ 22.436186] nvadsp 2993000.adsp: irq 91 is not pending and not active [ 22.442745] nvadsp 2993000.adsp: irq 92 is not pending and not active [ 22.449414] nvadsp 2993000.adsp: irq 93 is not pending and not active [ 22.455974] nvadsp 2993000.adsp: irq 94 is not pending and not active [ 22.462088] nvadsp 2993000.adsp: irq 95 is not pending and not active [ 22.468824] nvadsp 2993000.adsp: irq 96 is not pending and not active [ 22.475348] nvadsp 2993000.adsp: irq 97 is not pending and not active [ 22.481804] nvadsp 2993000.adsp: irq 98 is not pending and not active [ 22.488059] nvadsp 2993000.adsp: irq 99 is not pending and not active [ 22.494456] nvadsp 2993000.adsp: irq 100 is not pending and not active [ 22.501196] nvadsp 2993000.adsp: irq 101 is not pending and not active [ 22.507729] nvadsp 2993000.adsp: irq 102 is not pending and not active [ 22.514150] nvadsp 2993000.adsp: irq 103 is not pending and not active [ 22.520674] nvadsp 2993000.adsp: irq 104 is not pending and not active [ 22.527082] nvadsp 2993000.adsp: irq 105 is not pending and not active [ 22.533555] nvadsp 2993000.adsp: irq 106 is not pending and not active [ 22.539840] nvadsp 2993000.adsp: irq 107 is not pending and not active [ 22.546519] nvadsp 2993000.adsp: irq 108 is not pending and not active [ 22.552739] nvadsp 2993000.adsp: irq 109 is not pending and not active [ 22.559528] nvadsp 2993000.adsp: irq 110 is not pending and not active [ 22.565672] nvadsp 2993000.adsp: irq 111 is not pending and not active [ 22.572557] nvadsp 2993000.adsp: irq 112 is not pending and not active [ 22.578798] nvadsp 2993000.adsp: irq 113 is not pending and not active [ 22.585377] nvadsp 2993000.adsp: irq 114 is not pending and not active [ 22.592295] nvadsp 2993000.adsp: irq 115 is not pending and not active [ 22.598774] nvadsp 2993000.adsp: irq 116 is not pending and not active [ 22.606023] tegra210-adsp tegra210-adsp: Failed to start OS [ 22.611099] tegra210-adsp tegra210-adsp: Failed to init ADSP. [ 22.649774] tegra210-adsp: probe of tegra210-adsp failed with error -62 [ 39.904243] vdd-1v8-sd: disabling [ 39.904393] vdd-1v8-cvb: disabling [ 39.904533] vdd-epb-1v0: disabling [ 39.904642] vdd-fan: disabling [ 39.904751] vdd_sys_en: disabling [ 39.904871] vdd-sdmmc1-sw: disabling [ 39.905011] avdd-cam-2v8: disabling SIMATIC IPC520A Example Image (login: root/root) demo login: demo login: [ 44.101637] zram: Added device: zram0 [ 44.102116] zram: Added device: zram1 [ 44.102516] zram: Added device: zram2 [ 44.103968] zram: Added device: zram3 [ 44.223268] zram0: detected capacity change from 0 to 898543616 [ 44.388221] Adding 877480k swap on /dev/zram0. Priority:5 extents:1 across:877480k SS [ 44.394863] zram1: detected capacity change from 0 to 898543616 [ 44.428191] Adding 877480k swap on /dev/zram1. Priority:5 extents:1 across:877480k SS [ 44.430459] zram2: detected capacity change from 0 to 898543616 [ 44.460213] Adding 877480k swap on /dev/zram2. Priority:5 extents:1 across:877480k SS [ 44.462356] zram3: detected capacity change from 0 to 898543616 [ 44.500188] Adding 877480k swap on /dev/zram3. Priority:5 extents:1 across:877480k SS ▒▒ [0000.024] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.055] I> Ram repair fuse : 0x0 [0000.058] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x0, rst_level: 0x0 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.107] I> Temperature = 37500 [0000.110] W> Skipping boost for clk: BPMP_CPU_NIC [0000.115] W> Skipping boost for clk: BPMP_APB [0000.119] W> Skipping boost for clk: AXI_CBB [0000.123] W> Skipping boost for clk: AON_CPU_NIC [0000.127] W> Skipping boost for clk: CAN1 [0000.131] W> Skipping boost for clk: CAN2 [0000.135] I> Boot-device: QSPI (instance: 0) [0000.139] I> Qspi flash params source = mb1bct [0000.143] I> Qspi clock source : pllc_out0 [0000.147] I> Qspi-0 reinitialized [0000.150] I> Qspi flash params source = mb1bct [0000.163] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.170] W> Thermal config not found in BCT [0000.178] W> MEMIO rail config not found in BCT [0000.188] I> Qspi flash params source = mb1bct [0000.201] I> Qspi flash params source = mb1bct [0000.235] I> Qspi flash params source = mb1bct [0000.799] I> Qspi flash params source = mb1bct [0000.816] I> Qspi flash params source = mb1bct [0000.855] W> Platform config not found in BCT [0000.882] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ▒▒▒▒main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ▒▒ [0000.917] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.918] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.919] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.928] I> gpio framework initialized [0000.932] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.939] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.947] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.956] I> qspi flash-0 params source = boot args [0000.961] I> QSPI-0l initialized successfully [0000.965] I> sdmmc-3 params source = safe params [0001.364] I> sdmmc DDR50 mode [0001.382] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.399] W> Cannot find any partition table for 00000003 [0001.400] > PARTITION_MANAGER: Failed to publish partition. [0001.415] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.416] I> Active Boot chain : 0 [0002.087] I> Relocating BR-BCT [0002.089] > DEVICE_PROD: device prod is not initialized. [0002.114] E> I2C: slave not found in slaves. [0002.115] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.117] E> I2C_DEV: Failed to send register address 0x00000000. [0002.118] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. [0002.118] E> eeprom: Failed to read I2C slave device [0002.121] I> Failed to read CVB eeprom data @ AE [0002.125] I> Retrying CVB eeprom read @ AC ... [0002.130] E> I2C: slave not found in slaves. [0002.134] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start true. [0002.142] E> I2C_DEV: Failed to send register address 0x00000000. [0002.148] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0002.157] E> eeprom: Failed to read I2C slave device [0002.161] I> Failed to read CVB eeprom data @ AC [ 0002.423] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.424] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.424] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.425] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.425] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.425] I> dram_block larger than 80000000 [0002.428] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.439] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.443] I> found decompressor handler: lz4 [0002.671] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.672] I> Setting EKB blob info to OPTEE dtb finished. ▒▒NOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ▒▒ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ▒▒I▒▒clk_early initialized ▒▒/TC: ▒▒mail_early initialized ▒▒N▒▒fuse initialized hwwdt initialized ▒▒on-se▒▒t194_ec_get_ec_list: found 45 ecs ▒▒cure extern▒▒ec initialized vmon_setup_monitors: found 3 monitors vmon initialized ▒▒al ▒▒adc initialized ▒▒D▒▒fmon_populate_monitors: found 73 monitors ▒▒T found ▒▒fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ▒▒I/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu A▒▒clk_dt_late initialized ▒▒u▒▒noc_late initialized pm_post initialized dbells initialized ▒▒g 1▒▒dmce initialized ▒▒1▒▒cvc initialized ▒▒ 03:23:20 UT▒▒avfs_clk_mach_post initialized ▒▒C 202▒▒avfs_clk_platform_post initialized ▒▒2 ▒▒cvc_late initialized regulator_post initialized ▒▒aarch▒▒rm initialized console_late initialized clk_dt_post initialized mc_reg initialized ▒▒64 I/TC: WARNI▒▒pg_post initialized profile initialized fuse_late initialized extras_post initialized entering main console loop ] bpmp: init complete ▒▒NG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ▒▒ [0003.291] I> Welcome to NVDisp-Init [0003.291] I> NVDisp-Init version: t194-f9ecfedc [0003.291] I> CPU-BL Params @ 0xca020000 [0003.292] I> 0) Base:0x00000000 Size:0x00000000 [0003.292] I> 1) Base:0xc8300000 Size:0x00100000 [0003.292] I> 2) Base:0xc9800000 Size:0x00200000 [0003.293] I> 3) Base:0xc8600000 Size:0x00200000 [0003.295] I> 4) Base:0xc8200000 Size:0x00100000 [0003.299] I> 5) Base:0xc8100000 Size:0x00100000 [0003.304] I> 6) Base:0xc9400000 Size:0x00400000 [0003.308] I> 7) Base:0xc9000000 Size:0x00400000 [0003.313] I> 8) Base:0xc8000000 Size:0x00100000 [0003.317] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.322] I> 10) Base:0xca800000 Size:0x00800000 [0003.326] I> 11) Base:0x40000000 Size:0x00040000 [0003.331] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.335] I> 13) Base:0x40046000 Size:0x00002000 [0003.340] I> 14) Base:0x40048000 Size:0x00002000 [0003.344] I> 15) Base:0xaf000000 Size:0x00004000 [0003.349] I> 16) Base:0x4004a000 Size:0x00002000 [0003.353] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.357] I> 18) Base:0x4004c000 Size:0x00002000 [0003.362] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.366] I> 20) Base:0x4004e000 Size:0x00002000 [0003.371] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.375] I> 22) Base:0x00000000 Size:0x00000000 [0003.380] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.384] I> 24) Base:0xcc000000 Size:0x02000000 [0003.389] I> 25) Base:0x40050000 Size:0x00002000 [0003.393] I> 26) Base:0x40040000 Size:0x00006000 [0003.398] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.402] I> 28) Base:0xc8400000 Size:0x00200000 [0003.407] I> 29) Base:0xc8800000 Size:0x00400000 [0003.411] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.415] I> 31) Base:0x00000000 Size:0x00000000 [0003.420] I> 32) Base:0xf8000000 Size:0x08000000 [0003.424] I> 33) Base:0xce000000 Size:0x2a000000 [0003.429] I> 34) Base:0xcb000000 Size:0x01000000 [0003.433] I> 35) Base:0xae000000 Size:0x01000000 [0003.438] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.442] I> 37) Base:0xca000000 Size:0x00800000 [0003.447] I> 38) Base:0x80000000 Size:0x20000000 [0003.451] I> 39) Base:0xb0000000 Size:0x08000000 [0003.456] I> 40) Base:0x00000000 Size:0x00000000 [0003.460] I> 41) Base:0x00000000 Size:0x00000000 [0003.465] I> 42) Base:0x00000000 Size:0x00000000 [0003.469] I> 43) Base:0x00000000 Size:0x00000000 [0003.474] I> 44) Base:0x00000000 Size:0x00000000 [0003.478] I> 45) Base:0x00000000 Size:0x00000000 [0003.482] GIC-SPI Target CPU: 0 [0003.485] Interrupts Init done [0003.488] calling constructors [0003.491] initializing heap [0003.494] I> Heap: [0xa0960000 ... 0xadf00000] [0003.498] initializing threads [0003.501] initializing timers [0003.504] creating bootstrap completion thread [0003.508] top of bootstrap2() [0003.511] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.516] initializing platform [0003.518] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.524] W> device prod register failed [0003.528] I> Bl_dtb @0xadf00000 [0003.531] I> gpio framework initialized [0003.542] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.548] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.554] I> fixed regulator driver initialized [0003.566] I> register 'maxim' power off handle [0003.569] I> virtual i2c enabled [0003.569] I> registered 'maxim,max20024' pmic [0003.569] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.572] I> Boot-device: QSPI [0003.575] I> Boot_device: QSPI_FLASH instance: 0 [0003.579] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.590] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.597] I> QSPI source rate = 204000 Khz [0003.600] I> Requested rate for QSPI clock = 34000 Khz [0003.606] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.610] I> tx_clk_tap_delay : 0 [0003.613] I> rx_clk_tap_delay : 16 [0003.616] I> QSPI Flash Size = 32 MB [0003.624] I> Qspi initialized successfully [0003.625] I> qspi flash-0 params source = boot args [0003.629] W> No board IDs available [0003.632] E> Failed to get board id info! [0003.638] I> sdm Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) Press ESCAPE for boot options ** WARNING: Test Key is used. ** . L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ▒▒I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ▒▒[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x277587698 SMBIOS=0xc7db0000 SMBIOS 3.0=0x258a30000 MEMATTR=0x2593d0018 ESRT=0x25855f798 RNG=0x27c595918 MEMRESERVE=0x2593d1f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025855f798 to 0x000000025855f7d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000025851ffff] [ 0.000000] node 0: [mem 0x0000000258520000-0x000000025854ffff] [ 0.000000] node 0: [mem 0x0000000258550000-0x00000002586c5fff] [ 0.000000] node 0: [mem 0x00000002586c6000-0x000000025888dfff] [ 0.000000] node 0: [mem 0x000000025888e000-0x0000000258a1ffff] [ 0.000000] node 0: [mem 0x0000000258a20000-0x0000000258a3ffff] [ 0.000000] node 0: [mem 0x0000000258a40000-0x00000002591fffff] [ 0.000000] node 0: [mem 0x0000000259200000-0x000000025938ffff] [ 0.000000] node 0: [mem 0x0000000259390000-0x000000025943ffff] [ 0.000000] node 0: [mem 0x0000000259440000-0x00000002595bffff] [ 0.000000] node 0: [mem 0x00000002595c0000-0x00000002595cffff] [ 0.000000] node 0: [mem 0x00000002595d0000-0x000000025969ffff] [ 0.000000] node 0: [mem 0x00000002596a0000-0x00000002596affff] [ 0.000000] node 0: [mem 0x00000002596b0000-0x00000002596fffff] [ 0.000000] node 0: [mem 0x0000000259700000-0x000000025977ffff] [ 0.000000] node 0: [mem 0x0000000259780000-0x0000000259a9ffff] [ 0.000000] node 0: [mem 0x0000000259aa0000-0x0000000259abffff] [ 0.000000] node 0: [mem 0x0000000259ac0000-0x0000000259b2ffff] [ 0.000000] node 0: [mem 0x0000000259b30000-0x0000000259fbffff] [ 0.000000] node 0: [mem 0x0000000259fc0000-0x000000025a00ffff] [ 0.000000] node 0: [mem 0x000000025a010000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839269 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 nv-auto-config [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6941648K/7473856K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 466672K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000707] Console: colour dummy device 80x25 [ 0.002307] printk: console [tty0] enabled [ 0.002371] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002408] pid_max: default: 32768 minimum: 301 [ 0.002625] LSM: Security Framework initializing [ 0.002712] Yama: becoming mindful. [ 0.002754] SELinux: Initializing. [ 0.002934] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006104] rcu: Hierarchical SRCU implementation. [ 0.006383] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007090] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007162] DTB Build time: Aug 10 2022 20:31:49 [ 0.010060] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010332] Remapping and enabling EFI services. [ 0.011695] smp: Bringing up secondary CPUs ... [ 0.040848] Detected PIPT I-cache on CPU1 [ 0.040925] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070458] Detected PIPT I-cache on CPU2 [ 0.070558] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100162] Detected PIPT I-cache on CPU3 [ 0.100233] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.129808] Detected PIPT I-cache on CPU4 [ 0.129988] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.159676] Detected PIPT I-cache on CPU5 [ 0.159744] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160043] smp: Brought up 1 node, 6 CPUs [ 0.160398] SMP: Total of 6 processors activated. [ 0.160441] CPU features: detected: Privileged Access Never [ 0.160469] CPU features: detected: LSE atomic instructions [ 0.160488] CPU features: detected: User Access Override [ 0.160507] CPU features: detected: 32-bit EL0 Support [ 0.160525] CPU features: detected: RAS Extension Support [ 0.160542] CPU features: detected: CRC32 instructions [ 0.160560] CPU features: detected: 32-bit EL1 Support [ 0.228270] CPU: All CPU(s) started at EL2 [ 0.234390] devtmpfs: initialized [ 0.303566] Registered cp15_barrier emulation handler [ 0.303668] Registered setend emulation handler [ 0.303824] KASLR enabled [ 0.304207] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.304281] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.307287] pinctrl core: initialized pinctrl subsystem [ 0.308524] SMBIOS 3.0.0 present. [ 0.308596] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.309557] NET: Registered protocol family 16 [ 0.312103] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.312763] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.313261] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.313354] audit: initializing netlink subsys (disabled) [ 0.313716] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1 [ 0.314244] thermal_sys: Registered thermal governor 'step_wise' [ 0.314278] thermal_sys: Registered thermal governor 'power_allocator' [ 0.314310] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.317463] cpuidle: using governor menu [ 0.318008] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.318514] ASID allocator initialised with 32768 entries [ 0.318918] Serial: AMBA PL011 UART driver [ 0.323971] Tegra reboot handler registered. [ 0.409538] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.409732] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.410043] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.410113] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.410305] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.410374] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.410573] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.410667] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.410876] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.410938] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.414733] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.414783] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.414834] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.414878] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.414923] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.414965] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.415007] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.415049] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.415091] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.415132] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.415174] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.415216] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.415257] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.415348] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.415389] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.415452] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.415494] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.415648] mc-err: mcerr ops are set to t19x [ 0.431574] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.431617] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.431672] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.431698] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.440262] ACPI: Interpreter disabled. [ 0.441890] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.443743] iommu: Default domain type: Translated [ 0.443837] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.444385] SCSI subsystem initialized [ 0.444572] usbcore: registered new interface driver usbfs [ 0.444630] usbcore: registered new interface driver hub [ 0.444695] usbcore: registered new device driver usb [ 0.445372] mc: Linux media interface: v0.10 [ 0.445426] videodev: Linux video capture interface: v2.00 [ 0.445945] pps_core: LinuxPPS API ver. 1 registered [ 0.445975] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.446018] PTP clock support registered [ 0.446308] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.446674] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.446784] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.447596] Registered efivars operations [ 0.448242] FPGA manager framework [ 0.448367] Advanced Linux Sound Architecture Driver Initialized. [ 0.449211] Bluetooth: Core ver 2.22 [ 0.449295] NET: Registered protocol family 31 [ 0.449319] Bluetooth: HCI device and connection manager initialized [ 0.449352] Bluetooth: HCI socket layer initialized [ 0.449376] Bluetooth: L2CAP socket layer initialized [ 0.449446] Bluetooth: SCO socket layer initialized [ 0.451215] camchar: rtcpu character device driver loaded [ 0.452100] clocksource: Switched to clocksource arch_sys_counter [ 0.856819] VFS: Disk quotas dquot_6.6.0 [ 0.856930] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.857327] pnp: PnP ACPI: disabled [ 0.870446] la/ptsa driver initialized. [ 0.870600] NET: Registered protocol family 2 [ 0.870871] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.878531] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.878731] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.879117] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.879770] TCP: Hash tables configured (established 65536 bind 65536) [ 0.879950] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.880127] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.880458] NET: Registered protocol family 1 [ 0.881537] RPC: Registered named UNIX socket transport module. [ 0.881581] RPC: Registered udp transport module. [ 0.881605] RPC: Registered tcp transport module. [ 0.881628] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.881677] PCI: CLS 0 bytes, default 64 [ 0.882036] Trying to unpack rootfs image as initramfs... [ 1.146015] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.149385] Freeing initrd memory: 8196K [ 1.153325] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.153397] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.153465] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.153904] kvm [1]: IPA Size Limit: 40 bits [ 1.154427] kvm [1]: vgic interrupt IRQ9 [ 1.154994] kvm [1]: VHE mode initialized successfully [ 1.156469] Initialise system trusted keyrings [ 1.156789] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.162290] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.163107] NFS: Registering the id_resolver key type [ 1.163178] Key type id_resolver registered [ 1.163204] Key type id_legacy registered [ 1.163299] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.163333] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.163386] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.173956] NET: Registered protocol family 38 [ 1.173988] Key type asymmetric registered [ 1.174010] Asymmetric key parser 'x509' registered [ 1.174070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.174292] io scheduler mq-deadline registered [ 1.174347] io scheduler kyber registered [ 1.180014] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.183045] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.183157] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.183244] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.183332] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.183428] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.189352] scrncapt: init (heads:4 wins:6 planes:4) [ 1.189494] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.190412] EINJ: ACPI disabled. [ 1.194273] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.194314] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 1.194337] tegra-pmc: ### PMC reset level: L0 [ 1.194360] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.194424] tegra-pmc: PMC Prod config success [ 1.199688] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.204544] random: fast init done [ 1.204661] printk: console [ttyTCU0] enabled [ 2.774813] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.779463] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.784274] arm-smmu 10000000.iommu: stage 1 translation [ 2.789813] arm-smmu 10000000.iommu: stage 2 translation [ 2.795312] arm-smmu 10000000.iommu: nested translation [ 2.800638] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.807523] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.817758] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.820993] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.827546] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.835342] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.840588] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.845057] arm-smmu 12000000.iommu: stage 1 translation [ 2.850850] arm-smmu 12000000.iommu: stage 2 translation [ 2.855994] arm-smmu 12000000.iommu: nested translation [ 2.861417] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.868595] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.878553] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.881719] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.888538] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.895759] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.905797] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.908719] tegra_profiler: auth: init [ 2.913228] THERMAL EST: found 3 subdevs [ 2.916371] THERMAL EST num_resources: 0 [ 2.920469] [THERMAL EST subdev 0] [ 2.923515] [THERMAL EST subdev 1] [ 2.926959] [THERMAL EST subdev 2] [ 2.930454] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.936640] THERMAL EST: thz register success. [ 2.940891] THERMAL EST: end of probe, return err: 0 [ 2.946507] nvsciipc: loaded module [ 2.953713] tun: Universal TUN/TAP device driver, 1.6 [ 2.956195] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.961950] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.967785] e1000e: Intel(R) PRO/1000 Network Driver [ 2.972449] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.978784] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.984107] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.990279] PPP generic driver version 2.4.2 [ 2.994271] PPP BSD Compression module registered [ 2.998834] PPP Deflate Compression module registered [ 3.004047] PPP MPPE Compression module registered [ 3.009328] usbcore: registered new interface driver r8152 [ 3.014829] usbcore: registered new interface driver asix [ 3.020159] usbcore: registered new interface driver ax88179_178a [ 3.026294] usbcore: registered new interface driver cdc_ether [ 3.032237] usbcore: registered new interface driver net1080 [ 3.037578] usbcore: registered new interface driver cdc_subset [ 3.043873] usbcore: registered new interface driver zaurus [ 3.049572] usbcore: registered new interface driver cdc_ncm [ 3.054992] usbcore: registered new interface driver aqc111 [ 3.060897] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.066702] ohci-pci: OHCI PCI platform driver [ 3.071263] ohci-platform: OHCI generic platform driver [ 3.077140] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.083219] usbcore: registered new interface driver uas [ 3.087573] usbcore: registered new interface driver usb-storage [ 3.093506] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.099462] mousedev: PS/2 mouse device common for all mice [ 3.104712] usbcore: registered new interface driver xpad [ 3.112821] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.115167] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:21 UTC (21) [ 3.122993] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.129604] i2c /dev entries driver [ 3.132918] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.138667] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.144225] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.149624] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.155069] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.160498] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.165905] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.179568] device-mapper: uevent: version 1.0.3 [ 3.179979] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.186406] cpuidle: Initializing cpuidle driver [ 3.190337] sdhci: Secure Digital Host Controller Interface driver [ 3.195066] sdhci: Copyright(c) Pierre Ossman [ 3.199159] Synopsys Designware Multimedia Card Interface Driver [ 3.205380] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.211104] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.217051] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.224710] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.247396] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.257858] vdd-1v0: supplied by regulator-dummy [ 3.263626] vdd-1v8-hs: supplied by regulator-dummy [ 3.268768] vdd-1v8-ls: supplied by regulator-dummy [ 3.273861] vdd-1v8-ao: supplied by regulator-dummy [ 3.278073] vddio-ddr-1v1: supplied by regulator-dummy [ 3.283059] vdd-rtc: supplied by regulator-dummy [ 3.285209] spmic-ldo1: supplied by regulator-dummy [ 3.286992] vdd-ao-3v3: supplied by regulator-dummy [ 3.293751] vddio-emmc-3v3: supplied by regulator-dummy [ 3.300516] spmic-ldo4: supplied by regulator-dummy [ 3.302387] vdd-usb-3v3: supplied by regulator-dummy [ 3.309197] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.315989] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.322147] spmic-ldo8: supplied by vdd-1v8-ls [ 3.324261] gpio-510 (gpio_default): hogged as output/high [ 3.326198] gpio-511 (gpio_default): hogged as output/high [ 3.329129] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.465116] max77686-rtc max77620-rtc: registered as rtc0 [ 3.466464] max77620-power max20024-power: Event recorder REG_NVERC : 0x44 [ 3.466835] max77620 4-003c: max77620 probe successful ▒▒rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ▒▒[ 4.307210] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.308391] hid: raw HID events driver (C) Jiri Kosina [ 4.309236] usbcore: registered new interface driver usbhid [ 4.309377] usbhid: USB HID core driver [ 4.311537] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.312930] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ▒▒[ 22.735985] Camera-FW on t194-rce-safe started TCU early console enabled. [ 22.810074] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.897 ms) ▒▒[ 4.397034] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.397554] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.398802] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.399394] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.401211] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.401884] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.402527] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.403857] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.404139] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.406670] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.413573] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.420019] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.425047] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.430803] denver_knobs_init:MTS_VERSION:55637613 [ 4.443358] t19x_cache tegra-cache: probed [ 4.446534] optee: probing for conduit method. [ 4.447360] optee: revision 3.16 (65cc2218) [ 4.448482] optee: dynamic shared memory is enabled [ 4.452297] optee: initialized driver [ 4.459900] nvpmodel: initialized successfully [ 4.460594] tegra_hv: get_hvd: not initialized yet [ 4.464175] user_ivc_mempool: hypervisor not present [ 4.470410] usbcore: registered new interface driver snd-usb-audio [ 4.476748] u32 classifier [ 4.478196] input device check on [ 4.482042] Actions configured [ 4.485655] Initializing XFRM netlink socket [ 4.490355] NET: Registered protocol family 10 [ 4.496999] Segment Routing with IPv6 [ 4.497545] NET: Registered protocol family 17 [ 4.501910] NET: Registered protocol family 15 [ 4.506571] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.519962] Bluetooth: RFCOMM socket layer initialized [ 4.524824] Bluetooth: RFCOMM ver 1.11 [ 4.528398] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.534501] Bluetooth: HIDP socket layer initialized [ 4.540174] 9pnet: Installing 9P2000 support [ 4.543916] Key type dns_resolver registered [ 4.549463] registered taskstats version 1 [ 4.552190] Loading compiled-in X.509 certificates [ 4.564504] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.567977] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.578108] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.580376] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.588671] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.597037] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 5.713178] tegra194-pcie 14160000.pcie: Phy link never came up [ 5.713916] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 5.714107] pci_bus 0004:00: root bus resource [bus 00-ff] [ 5.714273] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 5.714466] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 5.714653] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 5.714980] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 5.715387] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 5.734217] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 5.734601] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.736710] pcieport 0004:00:00.0: Adding to iommu group 6 [ 5.738102] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 5.739294] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 5.741223] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 5.742082] pci 0004:00:00.0: Removing from iommu group 6 [ 5.742413] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 5.745972] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 5.750973] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 5.751284] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 5.751564] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 5.758476] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.876380] tegra194-pcie 141a0000.pcie: Link up [ 5.879016] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.879234] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.879375] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.879615] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.879909] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.880340] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.880743] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.890621] pci 0005:01:00.0: [12d8:c008] type 01 class 0x060400 [ 5.891053] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.892753] pci 0005:01:00.0: PME# supported from D0 D3hot D3cold [ 5.902835] pci 0005:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.905576] pci 0005:02:04.0: [12d8:c008] type 01 class 0x060400 [ 5.907329] pci 0005:02:04.0: PME# supported from D0 D3hot D3cold [ 5.909197] pci 0005:02:05.0: [12d8:c008] type 01 class 0x060400 [ 5.910998] pci 0005:02:05.0: PME# supported from D0 D3hot D3cold [ 5.913012] pci 0005:02:06.0: [12d8:c008] type 01 class 0x060400 [ 5.914733] pci 0005:02:06.0: PME# supported from D0 D3hot D3cold [ 5.916862] pci 0005:02:07.0: [12d8:c008] type 01 class 0x060400 [ 5.918503] pci 0005:02:07.0: PME# supported from D0 D3hot D3cold [ 5.925922] pci 0005:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.926387] pci 0005:02:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.933792] pci 0005:02:06.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.942105] pci 0005:02:07.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.950533] pci 0005:03:00.0: [8086:1533] type 00 class 0x020000 [ 5.955923] pci 0005:03:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 5.961960] pci 0005:03:00.0: reg 0x18: [io 0x0000-0x001f] [ 5.967906] pci 0005:03:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 5.974943] pci 0005:03:00.0: PME# supported from D0 D3hot D3cold [ 6.001746] pci_bus 0005:03: busn_res: [bus 03-ff] end is updated to 03 [ 6.003040] pci 0005:04:00.0: [8086:1533] type 00 class 0x020000 [ 6.003399] pci 0005:04:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 6.003696] pci 0005:04:00.0: reg 0x18: [io 0x0000-0x001f] [ 6.005028] pci 0005:04:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 6.011744] pci 0005:04:00.0: PME# supported from D0 D3hot D3cold [ 6.036415] pci_bus 0005:04: busn_res: [bus 04-ff] end is updated to 04 [ 6.037746] pci 0005:05:00.0: [8086:1533] type 00 class 0x020000 [ 6.038219] pci 0005:05:00.0: reg 0x10: [mem 0x00000000-0x0007ffff] [ 6.038570] pci 0005:05:00.0: reg 0x18: [io 0x0000-0x001f] [ 6.042014] pci 0005:05:00.0: reg 0x1c: [mem 0x00000000-0x00003fff] [ 6.048910] pci 0005:05:00.0: PME# supported from D0 D3hot D3cold [ 6.072481] pci_bus 0005:05: busn_res: [bus 05-ff] end is updated to 05 [ 6.081258] pci_bus 0005:06: busn_res: [bus 06-ff] end is updated to 06 [ 6.081720] pci_bus 0005:02: busn_res: [bus 02-ff] end is updated to 06 [ 6.082090] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f403fffff] [ 6.082344] pci 0005:00:00.0: BAR 13: assigned [io 0x100000-0x102fff] [ 6.088435] pci 0005:01:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f402fffff] [ 6.095242] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40300000-0x1f4037ffff] [ 6.102833] pci 0005:01:00.0: BAR 13: assigned [io 0x100000-0x102fff] [ 6.108938] pci 0005:02:04.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 6.116303] pci 0005:02:05.0: BAR 14: assigned [mem 0x1f40100000-0x1f401fffff] [ 6.123446] pci 0005:02:06.0: BAR 14: assigned [mem 0x1f40200000-0x1f402fffff] [ 6.130730] pci 0005:02:04.0: BAR 13: assigned [io 0x100000-0x100fff] [ 6.137298] pci 0005:02:05.0: BAR 13: assigned [io 0x101000-0x101fff] [ 6.143672] pci 0005:02:06.0: BAR 13: assigned [io 0x102000-0x102fff] [ 6.150194] pci 0005:03:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f4007ffff] [ 6.157543] pci 0005:03:00.0: BAR 3: assigned [mem 0x1f40080000-0x1f40083fff] [ 6.164770] pci 0005:03:00.0: BAR 2: assigned [io 0x100000-0x10001f] [ 6.170941] pci 0005:02:04.0: PCI bridge to [bus 03] [ 6.176159] pci 0005:02:04.0: bridge window [io 0x100000-0x100fff] [ 6.182385] pci 0005:02:04.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 6.189721] pci 0005:04:00.0: BAR 0: assigned [mem 0x1f40100000-0x1f4017ffff] [ 6.196880] pci 0005:04:00.0: BAR 3: assigned [mem 0x1f40180000-0x1f40183fff] [ 6.204273] pci 0005:04:00.0: BAR 2: assigned [io 0x101000-0x10101f] [ 6.211055] pci 0005:02:05.0: PCI bridge to [bus 04] [ 6.215787] pci 0005:02:05.0: bridge window [io 0x101000-0x101fff] [ 6.222633] pci 0005:02:05.0: bridge window [mem 0x1f40100000-0x1f401fffff] [ 6.229865] pci 0005:05:00.0: BAR 0: assigned [mem 0x1f40200000-0x1f4027ffff] [ 6.236956] pci 0005:05:00.0: BAR 3: assigned [mem 0x1f40280000-0x1f40283fff] [ 6.244220] pci 0005:05:00.0: BAR 2: assigned [io 0x102000-0x10201f] [ 6.250469] pci 0005:02:06.0: PCI bridge to [bus 05] [ 6.255672] pci 0005:02:06.0: bridge window [io 0x102000-0x102fff] [ 6.261829] pci 0005:02:06.0: bridge window [mem 0x1f40200000-0x1f402fffff] [ 6.269046] pci 0005:02:07.0: PCI bridge to [bus 06] [ 6.274125] pci 0005:01:00.0: PCI bridge to [bus 02-06] [ 6.278940] pci 0005:01:00.0: bridge window [io 0x100000-0x102fff] [ 6.285796] pci 0005:01:00.0: bridge window [mem 0x1f40000000-0x1f402fffff] [ 6.293095] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 6.298114] pci 0005:00:00.0: bridge window [io 0x100000-0x102fff] [ 6.304251] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f403fffff] [ 6.311478] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 6.320280] pci 0005:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.328594] pci 0005:02:04.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.337365] pci 0005:03:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 6.345789] pci 0005:02:05.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.354360] pci 0005:04:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 6.363104] pci 0005:02:06.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.371414] pci 0005:05:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 6.379872] pci 0005:02:07.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 128 [ 6.390581] pcieport 0005:00:00.0: Adding to iommu group 7 [ 6.395189] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 6.401162] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 6.407261] pcieport 0005:01:00.0: Adding to iommu group 7 [ 6.411693] pcieport 0005:01:00.0: enabling device (0000 -> 0003) [ 6.420796] pcieport 0005:02:04.0: Adding to iommu group 7 [ 6.422749] pcieport 0005:02:04.0: enabling device (0000 -> 0003) [ 6.432533] pcieport 0005:02:05.0: Adding to iommu group 7 [ 6.434315] pcieport 0005:02:05.0: enabling device (0000 -> 0003) [ 6.443808] pcieport 0005:02:06.0: Adding to iommu group 7 [ 6.446588] pcieport 0005:02:06.0: enabling device (0000 -> 0003) [ 6.455364] pcieport 0005:02:07.0: Adding to iommu group 7 [ 6.461804] igb 0005:03:00.0: Adding to iommu group 7 [ 6.462739] igb 0005:03:00.0: enabling device (0000 -> 0002) [ 6.506390] pps pps0: new PPS source ptp0 [ 6.506945] igb 0005:03:00.0: added PHC on eth0 [ 6.507109] igb 0005:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.507300] igb 0005:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 8c:f3:19:35:1c:c5 [ 6.507623] igb 0005:03:00.0: eth0: PBA No: 000500-000 [ 6.507776] igb 0005:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.509432] igb 0005:04:00.0: Adding to iommu group 7 [ 6.510572] igb 0005:04:00.0: enabling device (0000 -> 0002) [ 6.552153] pps pps1: new PPS source ptp1 [ 6.552600] igb 0005:04:00.0: added PHC on eth1 [ 6.552744] igb 0005:04:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.552962] igb 0005:04:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 8c:f3:19:35:1c:c6 [ 6.553266] igb 0005:04:00.0: eth1: PBA No: 000500-000 [ 6.553403] igb 0005:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.554843] igb 0005:05:00.0: Adding to iommu group 7 [ 6.555945] igb 0005:05:00.0: enabling device (0000 -> 0002) [ 6.600598] pps pps2: new PPS source ptp2 [ 6.601283] igb 0005:05:00.0: added PHC on eth2 [ 6.601446] igb 0005:05:00.0: Intel(R) Gigabit Ethernet Network Connection [ 6.601760] igb 0005:05:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 8c:f3:19:35:1c:c7 [ 6.602218] igb 0005:05:00.0: eth2: PBA No: 000500-000 [ 6.602400] igb 0005:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 6.638243] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.666266] host1x 13e10000.host1x: initialized [ 6.668483] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.669420] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.670935] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.671965] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.673633] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.674596] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.676035] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.677170] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.678736] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.680571] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.691099] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.697968] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.707363] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.714686] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.724583] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.731508] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.741432] falcon 15340000.vic: Adding to iommu group 17 [ 6.756322] falcon 15340000.vic: initialized [ 6.757438] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.763765] falcon 15380000.nvjpg: initialized [ 6.764577] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.774944] falcon 154c0000.nvenc: initialized [ 6.775730] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.784915] falcon 15a80000.nvenc1: initialized [ 6.785599] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.796950] nvdec 15480000.nvdec: initialized [ 6.797491] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.807662] nvdec 15140000.nvdec1: initialized [ 6.808355] tsec 15500000.tsec: Adding to iommu group 18 [ 6.814224] tsec 15500000.tsec: initialized [ 6.814792] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.822210] tsec 15100000.tsecb: initialized [ 6.826236] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.855627] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.869182] gpio-374 (wifi-enable): hogged as output/high [ 6.869543] gpio-431 (camera-control-output-low): hogged as output/low [ 6.869837] gpio-432 (camera-control-output-low): hogged as output/low [ 6.871668] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.873898] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.874428] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.875923] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.878073] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.883884] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.889192] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.897455] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.905137] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.917114] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.921494] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.927466] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.936282] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.945418] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.953169] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.960432] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.966771] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.976513] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.982457] pva 16000000.pva0: Adding to iommu group 22 [ 7.011149] pva 16000000.pva0: initialized [ 7.015890] pva 16800000.pva1: Adding to iommu group 23 [ 7.027291] pva 16800000.pva1: initialized [ 7.031654] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 7.044707] nvdla 15880000.nvdla0: initialized [ 7.046458] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 7.064331] nvdla 158c0000.nvdla1: initialized [ 7.068947] tegradccommon 15200000.display-hub: host1x channel mapped [ 7.069359] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 7.069457] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 7.069613] tegradc 15200000.display: Adding to iommu group 26 [ 7.069797] tegradccommon 15200000.display-hub: dma mapping done [ 7.070088] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 7.072034] tegradc 15200000.display: disp0 connected to head0->sor1 [ 7.072582] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 7.072670] generic_infoframe_type: 0x87 [ 7.073380] tegradc 15210000.display: Adding to iommu group 26 [ 7.073425] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 7.076981] tegradc 15200000.display: DT parsed successfully [ 7.077120] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 7.077137] tegra_cec 3960000.tegra_cec: probed [ 7.078272] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 7.081354] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 7.081899] kfuse 3830000.kfuse: initialized [ 7.082647] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 7.088592] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 7.094107] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 7.094925] serial-tegra 3100000.serial: Adding to iommu group 2 [ 7.103898] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 7.105521] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 7.110221] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 7.110229] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 7.111147] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 7.118662] serial-tegra 3110000.serial: Adding to iommu group 2 [ 7.121076] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 7.124872] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 7.128871] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 7.136596] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 7.143953] serial-tegra 3140000.serial: Adding to iommu group 2 [ 7.150475] tegradc 15210000.display: disp0 connected to head1->sor [ 7.157082] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 7.165446] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.185768] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 7.187860] tegradc 15210000.display: DT parsed successfully [ 7.193373] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.193435] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 7.199785] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 7.207413] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 7.296061] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 7.302817] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 7.310443] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.317742] usb usb1: Product: xHCI Host Controller [ 7.322466] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 7.328624] usb usb1: SerialNumber: 3610000.xhci [ 7.334420] hub 1-0:1.0: USB hub found [ 7.337570] hub 1-0:1.0: 4 ports detected [ 7.341946] tegra-xusb 3610000.xhci: xHCI Host Controller [ 7.346811] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 7.354589] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 7.362299] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 7.370204] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.377428] usb usb2: Product: xHCI Host Controller [ 7.382148] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 7.388350] usb usb2: SerialNumber: 3610000.xhci [ 7.393877] hub 2-0:1.0: USB hub found [ 7.396870] hub 2-0:1.0: 4 ports detected [ 7.442997] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 7.450008] i2c i2c-2: Added multiplexed i2c bus 9 [ 7.451620] i2c i2c-2: Added multiplexed i2c bus 10 [ 7.451786] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 7.465202] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1903000 KHz, changing to: 1907200 KHz [ 7.466372] tegra194-cpufreq ccplex: probed with BWMGR [ 7.467724] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 7.468283] irq: IRQ298: trimming hierarchy from :pmc@c360000 [ 7.468723] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 7.469867] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 7.477707] tegra194-vi5 15c10000.vi: initialized [ 7.479326] tegradc 15200000.display: disp0 connected to head0->sor1 [ 7.479595] generic_infoframe_type: 0x87 [ 7.481274] tegradc 15200000.display: DT parsed successfully [ 7.481392] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 7.487031] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 7.493427] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 7.501896] mmc0: CQHCI version 5.10 [ 7.508389] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 7.508395] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 7.508398] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 7.508795] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 7.508801] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 7.508981] nvethernet 2490000.ethernet: failed to read MDIO address [ 7.510158] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.510163] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.512689] tegradc 15200000.display: probed [ 7.541768] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 7.543603] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 7.589744] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 7.589751] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 7.589969] Console: switching to colour frame buffer device 80x30 [ 7.596158] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 7.596504] tegradc 15200000.display: fb registered [ 7.600137] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 7.603094] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 7.609149] irq: IRQ299: trimming hierarchy from :pmc@c360000 [ 7.609536] tegradc 15210000.display: disp1 connected to head1->sor [ 7.615695] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 7.620812] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.628715] nvethernet 2490000.ethernet: Ethernet MAC address: 8c:f3:19:35:1c:c4 [ 7.633945] tegradc 15210000.display: DT parsed successfully [ 7.645963] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.646055] tegradc 15210000.display: vblank syncpt # 13 for dc 1 [ 7.660276] tegradc 15210000.display: vpulse3 syncpt # 14 for dc 1 [ 7.693708] nvethernet 2490000.ethernet: Macsec not supported [ 7.701045] nvethernet 2490000.ethernet: eth3 (HW ver: 50) created with 1 DMA channels [ 7.709259] irq: IRQ301: trimming hierarchy from :pmc@c360000 [ 7.713392] tegradc 15210000.display: probed [ 7.713403] irq: IRQ302: trimming hierarchy from :interrupt-controller@3881000 [ 7.720804] mmc0: Command Queue Engine enabled [ 7.725242] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.729574] mmc0: periodic cache flush enabled [ 7.729592] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.737080] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.741206] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.748565] tegra-se-nvhost 15810000.se: initialized [ 7.751463] random: crng init done [ 7.753534] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.760798] usb 1-2: New USB device found, idVendor=04b4, idProduct=6506, bcdDevice=50.00 [ 7.762986] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.766160] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.767501] hub 1-2:1.0: USB hub found [ 7.773264] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.774142] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.781867] hub 1-2:1.0: 4 ports detected [ 7.788662] tegra-se-nvhost 15820000.se: initialized [ 7.822304] tegradc 15210000.display: fb registered [ 7.824367] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.833796] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.840464] tegra-se-nvhost 15830000.se: initialized [ 7.843295] Reserved SVD code 117 [ 7.845727] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.847859] Reserved SVD code 118 [ 7.855920] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.857670] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.863225] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.870171] tegra-se-nvhost 15840000.se: initialized [ 7.875675] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 7.882103] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.888382] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using tegra-xusb [ 7.892415] tegradc 15210000.display: dp: aux read defer (0x10020000) -- 6 [ 7.893885] tegra_actmon d230000.actmon: in actmon_register()... [ 7.897850] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 7.906241] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 7.912363] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.916644] usb 2-3: New USB device found, idVendor=04b4, idProduct=6504, bcdDevice=50.00 [ 7.916649] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.918771] hub 2-3:1.0: USB hub found [ 7.918860] hub 2-3:1.0: 4 ports detected [ 7.923689] tegradc 15210000.display: dp: aux read defer (0x10020000) -- 6 [ 7.927709] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.936086] dp lt: state 0 (Reset), pending_lt_evt 1 [ 7.941868] hvc_sysfs: hypervisor is not present [ 7.948417] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 7.948423] dp lt: state 0 (Reset), pending_lt_evt 0 [ 7.950579] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 7.979558] ALSA device list: [ 7.981332] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 7.987790] No soundcards found. [ 7.993241] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 8.018424] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 8.018431] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 8.018438] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 8.018448] dp lt: tx_pu: 0x20 [ 8.065054] dp lt: CR not done [ 8.066076] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 8.066261] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 8.066440] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 8.066642] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 8.073545] dp lt: CR retry [ 8.076685] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 8.084114] usb 1-2.3: new high-speed USB device number 3 using tegra-xusb [ 8.084829] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 8.097712] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 8.104017] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 8.109955] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 8.116425] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 8.123326] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 8.129997] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 8.136627] dp lt: tx_pu: 0x40 [ 8.165027] dp lt: CR done [ 8.165118] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 8.165329] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 8.190959] dp lt: CE done [ 8.191047] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 8.191359] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 8.191598] Extcon AUX0(DP): enable [ 8.191754] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 8.191934] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 8.196686] Freeing unused kernel memory: 3968K [ 8.208183] Run /init as init process [ 8.213518] usb 1-2.3: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 [ 8.213755] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.219252] usb 1-2.3: Product: 4-Port USB 2.0 Hub [ 8.224276] usb 1-2.3: Manufacturer: Generic [ 8.230474] hub 1-2.3:1.0: USB hub found [ 8.233475] hub 1-2.3:1.0: 4 ports detected [ 8.262194] Root device found: mmcblk0p1 [ 8.264460] Found dev node: /dev/mmcblk0p1 [ 8.288857] usb 2-3.3: new SuperSpeed Gen 1 USB device number 3 using tegra-xusb [ 8.296139] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 8.296329] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 8.299937] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 8.304131] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 8.304158] Rootfs mounted over mmcblk0p1 [ 8.317045] Reserved SVD code 117 [ 8.317165] Reserved SVD code 118 [ 8.321388] usb 2-3.3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 [ 8.321637] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.321840] usb 2-3.3: Product: 4-Port USB 3.0 Hub [ 8.321951] usb 2-3.3: Manufacturer: Generic [ 8.326772] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.330858] hub 2-3.3:1.0: USB hub found [ 8.332441] hub 2-3.3:1.0: 4 ports detected [ 8.353247] Switching from initrd to actual rootfs ▒▒WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ▒▒[ 8.391098] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.391108] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391115] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391121] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391126] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391132] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391138] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391144] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391150] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391156] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391177] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391183] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391189] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391196] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391201] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391207] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391213] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391219] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391225] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391232] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391239] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391247] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 8.391254] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.391260] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.391267] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.391274] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 8.391282] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391289] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391313] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391320] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391327] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391340] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391350] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391358] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391364] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391372] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391379] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391385] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391392] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391399] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391406] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391413] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391420] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391427] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391434] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391441] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391448] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 8.391479] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.391486] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.391494] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.391501] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.391505] tegradc 15210000.display: mode bw=30729816000 > link bw=25920000000 [ 8.391510] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.391514] tegradc 15210000.display: mode bw=31914888000 > link bw=25920000000 [ 8.391519] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.391527] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.391534] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.391542] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.391551] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.391559] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.391567] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.391574] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.391582] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.391589] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.391597] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 8.391603] tegradc 15210000.display: blank - powerdown [ 8.441061] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 8.441067] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 8.441071] dp lt: state 0 (Reset), pending_lt_evt 0 [ 8.441078] dp lt: link training force disable [ 8.441081] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 8.463349] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 8.463355] Extcon AUX0(DP) disable [ 8.465024] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 8.465187] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 8.466286] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 8.466334] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.466346] tegradc 15210000.display: unblank [ 8.467631] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 8.467822] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 8.468041] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 8.474132] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 8.485823] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 8.485828] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 8.485833] dp lt: state 0 (Reset), pending_lt_evt 0 [ 8.488035] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 8.488044] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 8.488572] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 8.488579] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 8.488621] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 8.488628] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 8.488634] dp lt: tx_pu: 0x20 [ 8.489158] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 8.513082] dp lt: CR not done [ 8.514021] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 8.514025] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 8.514028] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 8.514031] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 8.514034] dp lt: CR retry [ 8.514054] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 8.514061] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 8.514071] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 8.514096] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 8.514101] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 8.514108] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 8.514113] dp lt: tx_pu: 0x40 [ 8.528147] usb 1-2.3.1: new high-speed USB device number 4 using tegra-xusb [ 8.537042] dp lt: CR done [ 8.537048] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 8.537054] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 8.561467] dp lt: CE not done [ 8.562385] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 8.562389] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 8.562391] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 8.562395] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 8.562401] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 8.562408] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 8.562414] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 8.562420] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 8.562425] dp lt: tx_pu: 0x60 [ 8.562942] dp lt: CE retry [ 8.562947] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 8.562953] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 8.586999] dp lt: CE done [ 8.587003] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 8.587079] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 8.587089] Extcon AUX0(DP): enable [ 8.603728] tegradc 15210000.display: sync windows ret = 246 [ 8.702278] usb 1-2.3.1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 [ 8.702296] usb 1-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.450216] usb 1-2.3.1: Product: 4-Port USB 2.0 Hub [ 9.450223] usb 1-2.3.1: Manufacturer: Generic [ 9.452181] hub 1-2.3.1:1.0: USB hub found [ 9.463437] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.463446] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463453] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463459] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463465] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463473] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463500] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463507] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463513] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463519] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463525] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463531] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463537] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463544] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463550] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463557] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463563] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463585] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463592] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463598] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463604] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463610] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 9.463617] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.463624] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.463630] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.463637] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 9.463644] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463667] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463674] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463681] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463687] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463695] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463702] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463709] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463716] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463724] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463731] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463737] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463744] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463751] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463758] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463765] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463772] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463779] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463786] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463793] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463799] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 9.463810] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.463817] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.463824] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.463831] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.463836] tegradc 15210000.display: mode bw=30729816000 > link bw=25920000000 [ 9.463841] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.463845] tegradc 15210000.display: mode bw=31914888000 > link bw=25920000000 [ 9.463850] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.463858] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.463866] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.463873] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.463880] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.463888] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.463895] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.463902] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.463910] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.463921] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.463929] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 9.463936] tegradc 15210000.display: blank - powerdown [ 9.464406] hub 1-2.3.1:1.0: 4 ports detected [ 9.503778] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 9.503783] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 9.503788] dp lt: state 0 (Reset), pending_lt_evt 0 [ 9.503794] dp lt: link training force disable [ 9.503797] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 9.520932] usb 2-3.3.1: new SuperSpeed Gen 1 USB device number 4 using tegra-xusb [ 9.525556] extcon-disp-state external-connection:disp-state: cable 46 state 0 [ 9.525561] Extcon AUX0(DP) disable [ 9.527133] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 9.527296] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 9.528241] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 9.528296] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.528309] tegradc 15210000.display: unblank [ 9.529798] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 9.529978] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 9.530194] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 9.535945] tegradc 15210000.display: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 9.547663] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 9.547668] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 9.547673] dp lt: state 0 (Reset), pending_lt_evt 0 [ 9.549790] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 9.549797] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 9.550288] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 9.550295] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 9.550302] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 9.550308] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 9.550314] dp lt: tx_pu: 0x20 [ 9.550809] tegradc 15210000.display: dp: aux write defer (0x10020000) -- 6 [ 9.553136] usb 2-3.3.1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 [ 9.553142] usb 2-3.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.553145] usb 2-3.3.1: Product: 4-Port USB 3.0 Hub [ 9.553149] usb 2-3.3.1: Manufacturer: Generic [ 9.562958] hub 2-3.3.1:1.0: USB hub found [ 9.564951] hub 2-3.3.1:1.0: 4 ports detected [ 9.577006] dp lt: CR not done [ 9.577937] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 9.577941] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 9.577944] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 9.577947] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 9.577950] dp lt: CR retry [ 9.577954] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 9.577960] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 9.577970] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 9.577976] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 9.577982] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 9.577988] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 9.577994] dp lt: tx_pu: 0x40 [ 9.601013] dp lt: CR done [ 9.601017] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 9.601023] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 9.624105] usb 1-2.3.3: new full-speed USB device number 5 using tegra-xusb [ 9.625501] dp lt: CE not done [ 9.626427] dp lt: new config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 9.626431] dp lt: new config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 9.626434] dp lt: new config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 9.626437] dp lt: new config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 9.626443] dp lt: config: lane 0: vs level: 2, pe level: 1, pc2 level: 0 [ 9.626450] dp lt: config: lane 1: vs level: 2, pe level: 1, pc2 level: 0 [ 9.626456] dp lt: config: lane 2: vs level: 2, pe level: 1, pc2 level: 0 [ 9.626462] dp lt: config: lane 3: vs level: 2, pe level: 1, pc2 level: 0 [ 9.626467] dp lt: tx_pu: 0x60 [ 9.626958] dp lt: CE retry [ 9.626962] dp lt: switching from state 3 (channel equalization) to state 3 (channel equalization) [ 9.626967] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 9.651009] dp lt: CE done [ 9.651014] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 9.651058] extcon-disp-state external-connection:disp-state: cable 46 state 1 [ 9.651061] Extcon AUX0(DP): enable [ 9.667740] tegradc 15210000.display: sync windows ret = 246 [ 9.852143] usb 1-2.3.3: New USB device found, idVendor=046d, idProduct=c336, bcdDevice= 9.00 [ 9.852148] usb 1-2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.852152] usb 1-2.3.3: Product: Gaming Keyboard G213 [ 9.852155] usb 1-2.3.3: Manufacturer: Logitech [ 9.852158] usb 1-2.3.3: SerialNumber: 085F39523435 [ 9.937578] input: Logitech Gaming Keyboard G213 as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.0/0003:046D:C336.0001/input/input1 [ 10.587970] extcon-disp-state external-connection:disp-state: cable 44 state 1 [ 10.587974] Extcon DP: HPD enabled [ 10.587997] hpd: switching from state 2 (Check EDID) to state 4 (Enabled) [ 10.614936] systemd[1]: System time before build time, advancing clock. [ 10.644502] hid-generic 0003:046D:C336.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G213] on usb-3610000.xhci-2.3.3/input0 [ 10.646779] input: Logitech Gaming Keyboard G213 Keyboard as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.1/0003:046D:C336.0002/input/input2 [ 10.693177] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 10.695636] systemd[1]: Detected architecture arm64. [ 10.704487] input: Logitech Gaming Keyboard G213 Consumer Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.3/1-2.3.3:1.1/0003:046D:C336.0002/input/input3 [ 10.705304] hid-generic 0003:046D:C336.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Keyboard G213] on usb-3610000.xhci-2.3.3/input1 [ 10.735679] systemd[1]: Set hostname to . [ 10.788155] usb 1-2.3.4: new full-speed USB device number 6 using tegra-xusb [ 10.890469] usb 1-2.3.4: New USB device found, idVendor=046d, idProduct=c084, bcdDevice= 7.03 [ 10.890687] usb 1-2.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.890864] usb 1-2.3.4: Product: G102 Prodigy Gaming Mouse [ 10.890997] usb 1-2.3.4: Manufacturer: Logitech [ 10.891090] usb 1-2.3.4: SerialNumber: 0F6D386A3134 [ 10.895161] input: Logitech G102 Prodigy Gaming Mouse as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.0/0003:046D:C084.0003/input/input6 [ 10.895934] hid-generic 0003:046D:C084.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G102 Prodigy Gaming Mouse] on usb-3610000.xhci-2.3.4/input0 [ 10.898245] input: Logitech G102 Prodigy Gaming Mouse Keyboard as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/0003:046D:C084.0004/input/input7 [ 10.956507] input: Logitech G102 Prodigy Gaming Mouse Consumer Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/0003:046D:C084.0004/input/input8 [ 10.957050] input: Logitech G102 Prodigy Gaming Mouse System Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.3/1-2.3.4/1-2.3.4:1.1/0003:046D:C084.0004/input/input9 [ 10.957683] hid-generic 0003:046D:C084.0004: input,hiddev97,hidraw3: USB HID v1.11 Keyboard [Logitech G102 Prodigy Gaming Mouse] on usb-3610000.xhci-2.3.4/input1 [ 11.238574] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 11.238886] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 11.242901] systemd[1]: Created slice system-modprobe.slice. [ 11.244773] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 11.246178] systemd[1]: Created slice User and Session Slice. [ 11.246949] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 11.248789] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 11.249422] systemd[1]: Reached target User and Group Name Lookups. [ 11.249873] systemd[1]: Reached target Slices. [ 11.250184] systemd[1]: Reached target Swap. [ 11.251477] systemd[1]: Listening on RPCbind Server Activation Socket. [ 11.252394] systemd[1]: Listening on Syslog Socket. [ 11.253177] systemd[1]: Listening on fsck to fsckd communication Socket. [ 11.253810] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 11.255249] systemd[1]: Listening on Journal Audit Socket. [ 11.256115] systemd[1]: Listening on Journal Socket (/dev/log). [ 11.257128] systemd[1]: Listening on Journal Socket. [ 11.260445] systemd[1]: Listening on udev Control Socket. [ 11.265548] systemd[1]: Listening on udev Kernel Socket. [ 11.275605] systemd[1]: Mounting Huge Pages File System... [ 11.281414] systemd[1]: Mounting POSIX Message Queue File System... [ 11.287114] systemd[1]: Mounting RPC Pipe File System... [ 11.293413] systemd[1]: Mounting Kernel Debug File System... [ 11.299179] systemd[1]: Mounting Kernel Trace File System... [ 11.306499] systemd[1]: Starting Journal Service... [ 11.313789] systemd[1]: Starting Set the console keyboard layout... [ 11.319498] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 11.320223] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 11.331595] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 11.339073] systemd[1]: Started Nameserver information manager. [ 11.341137] systemd[1]: Reached target Network (Pre). [ 11.347821] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 11.354554] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 11.361158] systemd[1]: Starting Load Kernel Modules... [ 11.374087] systemd[1]: Starting Remount Root and Kernel File Systems... [ 11.380701] systemd[1]: Starting udev Coldplug all Devices... [ 11.389566] systemd[1]: Mounted Huge Pages File System. [ 11.391479] systemd[1]: Mounted POSIX Message Queue File System. [ 11.393048] systemd[1]: Mounted RPC Pipe File System. [ 11.398495] systemd[1]: Mounted Kernel Debug File System. [ 11.400442] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 11.402165] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 11.415159] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 11.417951] systemd[1]: Mounted Kernel Trace File System. [ 11.424092] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 11.437563] nvmap_page_pool_init: Total RAM pages: 1754837 [ 11.437568] nvmap_page_pool_init: nvmap page pool size: 219354 pages (856 MB) [ 11.437878] nvmap_background_zero_thread: PP zeroing thread starting. [ 11.443153] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 11.465762] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 11.468191] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 11.472110] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 11.490296] systemd[1]: nvfb-udev.service: Succeeded. [ 11.495770] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 11.509631] systemd[1]: Finished Remount Root and Kernel File Systems. [ 11.514956] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 11.515414] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.528971] systemd[1]: Starting Load/Save Random Seed... [ 11.536107] systemd[1]: Starting Create System Users... [ 11.582375] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 11.582375] [ 11.583091] systemd[1]: Finished Load/Save Random Seed. [ 11.587122] systemd[1]: Finished Set the console keyboard layout. [ 11.590937] systemd[1]: Finished Create System Users. [ 11.597519] systemd[1]: Starting Create Static Device Nodes in /dev... [ 11.612892] systemd[1]: Finished Load Kernel Modules. [ 11.614725] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 11.621321] systemd[1]: Mounting Kernel Configuration File System... [ 11.627660] systemd[1]: Started OP-TEE Client Supplicant. [ 11.633355] systemd[1]: Starting Apply Kernel Variables... [ 11.638418] systemd[1]: Mounted Kernel Configuration File System. [ 11.644648] systemd[1]: Finished Create Static Device Nodes in /dev. [ 11.645812] systemd[1]: Reached target Local File Systems (Pre). [ 11.646238] systemd[1]: Reached target Local File Systems. [ 11.646771] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 11.651816] systemd[1]: Starting Enable support for additional executable binary formats... [ 11.657496] systemd[1]: Starting Set console font and keymap... [ 11.662887] systemd[1]: Starting Preprocess NFS configuration... [ 11.669342] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... [ 11.670907] systemd[1]: Condition check resulted in Load AppArmor profiles managed internally by snapd being skipped. [ 13.352706] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 13.358082] imx219 9-0010: board setup failed [ 13.358319] imx219: probe of 9-0010 failed with error -121 [ 13.371179] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 13.376655] imx219 10-0010: board setup failed [ 13.376887] imx219: probe of 10-0010 failed with error -121 [ 13.436782] using random self ethernet address [ 13.436924] using random host ethernet address [ 15.069385] using random self ethernet address [ 15.069543] using random host ethernet address [ 15.267896] 1 fixed-partitions partitions found on MTD device spi6.0 [ 15.268203] Creating 1 MTD partitions on "spi6.0": [ 15.268352] 0x000000000000-0x000002000000 : "Whole_flash0" [ 16.349471] IRQ237: set affinity failed(-22). [ 16.349588] IRQ238: set affinity failed(-22). [ 16.349682] IRQ239: set affinity failed(-22). [ 16.349775] IRQ240: set affinity failed(-22). [ 16.349884] IRQ241: set affinity failed(-22). [ 16.349977] IRQ242: set affinity failed(-22). [ 16.350063] IRQ243: set affinity failed(-22). [ 16.350148] IRQ244: set affinity failed(-22). [ 16.350233] IRQ245: set affinity failed(-22). [ 16.350320] IRQ246: set affinity failed(-22). [ 16.350560] CPU4: shutdown [ 16.401787] CPU5: shutdown Ubuntu 20.04.4 LTS ubuntu ttyTCU0 ubuntu login: [