L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... 觨/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000665] Console: colour dummy device 80x25 [ 0.002051] printk: console [tty0] enabled [ 0.002112] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002146] pid_max: default: 32768 minimum: 301 [ 0.002305] LSM: Security Framework initializing [ 0.002361] Yama: becoming mindful. [ 0.002403] SELinux: Initializing. [ 0.002548] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002585] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005551] rcu: Hierarchical SRCU implementation. [ 0.005800] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006660] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006712] DTB Build time: Aug 10 2022 20:31:49 [ 0.009423] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009672] Remapping and enabling EFI services. [ 0.011587] smp: Bringing up secondary CPUs ... [ 0.042472] Detected PIPT I-cache on CPU1 [ 0.042565] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073833] Detected PIPT I-cache on CPU2 [ 0.073988] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103601] Detected PIPT I-cache on CPU3 [ 0.103740] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133563] Detected PIPT I-cache on CPU4 [ 0.133658] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163595] Detected PIPT I-cache on CPU5 [ 0.163698] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164042] smp: Brought up 1 node, 6 CPUs [ 0.164254] SMP: Total of 6 processors activated. [ 0.164295] CPU features: detected: Privileged Access Never [ 0.164317] CPU features: detected: LSE atomic instructions [ 0.164329] CPU features: detected: User Access Override [ 0.164342] CPU features: detected: 32-bit EL0 Support [ 0.164354] CPU features: detected: RAS Extension Support [ 0.164365] CPU features: detected: CRC32 instructions [ 0.164377] CPU features: detected: 32-bit EL1 Support [ 0.234455] CPU: All CPU(s) started at EL2 [ 0.241475] devtmpfs: initialized [ 0.295050] Registered cp15_barrier emulation handler [ 0.295163] Registered setend emulation handler [ 0.295186] KASLR enabled [ 0.295539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.295562] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296935] pinctrl core: initialized pinctrl subsystem [ 0.297968] SMBIOS 3.0.0 present. [ 0.298002] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.298608] NET: Registered protocol family 16 [ 0.300479] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.300981] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301688] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301746] audit: initializing netlink subsys (disabled) [ 0.302112] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.302613] thermal_sys: Registered thermal governor 'step_wise' [ 0.302621] thermal_sys: Registered thermal governor 'power_allocator' [ 0.302637] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304885] cpuidle: using governor menu [ 0.305242] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305669] ASID allocator initialised with 32768 entries [ 0.305930] Serial: AMBA PL011 UART driver [ 0.309747] Tegra reboot handler registered. [ 0.381403] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.381523] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.381697] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.381742] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381867] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.381912] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.382021] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.382065] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.382181] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.382229] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.384363] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.384402] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.384430] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.384458] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.384487] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.384513] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.384549] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.384579] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384603] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384626] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384669] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384694] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384734] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384758] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384782] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384806] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384829] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.384921] mc-err: mcerr ops are set to t19x [ 0.397911] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397934] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397945] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397956] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404508] ACPI: Interpreter disabled. [ 0.405671] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406953] iommu: Default domain type: Translated [ 0.407024] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407445] SCSI subsystem initialized [ 0.407618] usbcore: registered new interface driver usbfs [ 0.407663] usbcore: registered new interface driver hub [ 0.407698] usbcore: registered new device driver usb [ 0.408047] mc: Linux media interface: v0.10 [ 0.408079] videodev: Linux video capture interface: v2.00 [ 0.408379] pps_core: LinuxPPS API ver. 1 registered [ 0.408390] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408411] PTP clock support registered [ 0.408601] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.408890] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.408975] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.409540] Registered efivars operations [ 0.415391] FPGA manager framework [ 0.415502] Advanced Linux Sound Architecture Driver Initialized. [ 0.416115] Bluetooth: Core ver 2.22 [ 0.416152] NET: Registered protocol family 31 [ 0.416163] Bluetooth: HCI device and connection manager initialized [ 0.416177] Bluetooth: HCI socket layer initialized [ 0.416193] Bluetooth: L2CAP socket layer initialized [ 0.416213] Bluetooth: SCO socket layer initialized [ 0.417829] camchar: rtcpu character device driver loaded [ 0.418541] clocksource: Switched to clocksource arch_sys_counter [ 0.708585] VFS: Disk quotas dquot_6.6.0 [ 0.708656] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.709036] pnp: PnP ACPI: disabled [ 0.722595] la/ptsa driver initialized. [ 0.722758] NET: Registered protocol family 2 [ 0.722927] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.727854] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.727990] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.728242] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.728668] TCP: Hash tables configured (established 65536 bind 65536) [ 0.728793] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.728885] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.729077] NET: Registered protocol family 1 [ 0.729603] RPC: Registered named UNIX socket transport module. [ 0.729620] RPC: Registered udp transport module. [ 0.729629] RPC: Registered tcp transport module. [ 0.729637] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.729662] PCI: CLS 0 bytes, default 64 [ 0.729865] Trying to unpack rootfs image as initramfs... [ 0.919000] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.921168] Freeing initrd memory: 8196K [ 0.924925] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.924963] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.924998] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.925365] kvm [1]: IPA Size Limit: 40 bits [ 0.925809] kvm [1]: vgic interrupt IRQ9 [ 0.926238] kvm [1]: VHE mode initialized successfully [ 0.927680] Initialise system trusted keyrings [ 0.927967] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.933724] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.934482] NFS: Registering the id_resolver key type [ 0.934512] Key type id_resolver registered [ 0.934522] Key type id_legacy registered [ 0.934614] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.934631] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.934659] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.942689] NET: Registered protocol family 38 [ 0.942712] Key type asymmetric registered [ 0.942723] Asymmetric key parser 'x509' registered [ 0.942775] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.942959] io scheduler mq-deadline registered [ 0.942973] io scheduler kyber registered [ 0.946962] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.949070] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.949130] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.949180] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.949228] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.949275] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.952765] scrncapt: init (heads:4 wins:6 planes:4) [ 0.953162] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.953681] EINJ: ACPI disabled. [ 0.955792] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.955816] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 0.955827] tegra-pmc: ### PMC reset level: L1 [ 0.955836] tegra-pmc: ### PMC reset status reg: 0x9 [ 0.955880] tegra-pmc: PMC Prod config success [ 0.960363] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.964377] random: fast init done [ 0.964415] printk: console [ttyTCU0] enabled [ 2.516702] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.521373] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.525897] arm-smmu 10000000.iommu: stage 1 translation [ 2.531149] arm-smmu 10000000.iommu: stage 2 translation [ 2.536919] arm-smmu 10000000.iommu: nested translation [ 2.542037] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.549179] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.561065] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.562848] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.569127] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.577258] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.582424] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.587148] arm-smmu 12000000.iommu: stage 1 translation [ 2.592405] arm-smmu 12000000.iommu: stage 2 translation [ 2.598081] arm-smmu 12000000.iommu: nested translation [ 2.603280] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.610439] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.622204] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.623818] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.630113] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.637824] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.647366] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.650809] tegra_profiler: auth: init [ 2.654755] THERMAL EST: found 3 subdevs [ 2.658177] THERMAL EST num_resources: 0 [ 2.662317] [THERMAL EST subdev 0] [ 2.665376] [THERMAL EST subdev 1] [ 2.669043] [THERMAL EST subdev 2] [ 2.672290] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.678746] THERMAL EST: thz register success. [ 2.682992] THERMAL EST: end of probe, return err: 0 [ 2.687981] nvsciipc: loaded module [ 2.695085] tun: Universal TUN/TAP device driver, 1.6 [ 2.697734] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.704051] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.709373] e1000e: Intel(R) PRO/1000 Network Driver [ 2.714565] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.720402] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.725942] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.732065] PPP generic driver version 2.4.2 [ 2.736353] PPP BSD Compression module registered [ 2.740893] PPP Deflate Compression module registered [ 2.746141] PPP MPPE Compression module registered [ 2.750897] usbcore: registered new interface driver r8152 [ 2.756667] usbcore: registered new interface driver asix [ 2.761737] usbcore: registered new interface driver ax88179_178a [ 2.767878] usbcore: registered new interface driver cdc_ether [ 2.773818] usbcore: registered new interface driver net1080 [ 2.779668] usbcore: registered new interface driver cdc_subset [ 2.785450] usbcore: registered new interface driver zaurus [ 2.791145] usbcore: registered new interface driver cdc_ncm [ 2.796831] usbcore: registered new interface driver aqc111 [ 2.802751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.808588] ohci-pci: OHCI PCI platform driver [ 2.813096] ohci-platform: OHCI generic platform driver [ 2.819090] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.825106] usbcore: registered new interface driver uas [ 2.829141] usbcore: registered new interface driver usb-storage [ 2.835515] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.841587] mousedev: PS/2 mouse device common for all mice [ 2.846576] usbcore: registered new interface driver xpad [ 2.854429] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.857302] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.865096] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.871622] i2c /dev entries driver [ 2.874765] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.880570] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.886209] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.891678] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.896580] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.902061] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.907507] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.921558] device-mapper: uevent: version 1.0.3 [ 2.922004] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.928303] cpuidle: Initializing cpuidle driver [ 2.932386] sdhci: Secure Digital Host Controller Interface driver [ 2.936635] sdhci: Copyright(c) Pierre Ossman [ 2.941002] Synopsys Designware Multimedia Card Interface Driver [ 2.947212] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.953162] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.953724] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.966182] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.984532] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.993102] vdd-1v0: supplied by regulator-dummy [ 2.998445] vdd-1v8-hs: supplied by regulator-dummy [ 3.003226] vdd-1v8-ls: supplied by regulator-dummy [ 3.007879] vdd-1v8-ao: supplied by regulator-dummy [ 3.011712] vddio-ddr-1v1: supplied by regulator-dummy [ 3.016010] vdd-rtc: supplied by regulator-dummy [ 3.017624] spmic-ldo1: supplied by regulator-dummy [ 3.018827] vdd-ao-3v3: supplied by regulator-dummy [ 3.024957] vddio-emmc-3v3: supplied by regulator-dummy [ 3.031138] spmic-ldo4: supplied by regulator-dummy [ 3.032361] vdd-usb-3v3: supplied by regulator-dummy [ 3.038501] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.044569] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.049971] spmic-ldo8: supplied by vdd-1v8-ls [ 3.051264] gpio-510 (gpio_default): hogged as output/high [ 3.052855] gpio-511 (gpio_default): hogged as output/high [ 3.060041] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.198675] max77686-rtc max77620-rtc: registered as rtc0 [ 3.199867] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.200140] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 3.906090] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.907210] hid: raw HID events driver (C) Jiri Kosina [ 3.907952] usbcore: registered new interface driver usbhid [ 3.908097] usbhid: USB HID core driver [ 3.909765] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.910937] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 26.626476] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.701911] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.245 ms) 墁 3.996193] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.996795] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.997723] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.998508] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.000222] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.000885] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.001442] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.002750] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.003082] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.004955] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.012072] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.018749] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.023654] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.029662] denver_knobs_init:MTS_VERSION:55637613 [ 4.042221] t19x_cache tegra-cache: probed [ 4.044755] optee: probing for conduit method. [ 4.045569] optee: revision 3.16 (65cc2218) [ 4.046420] optee: dynamic shared memory is enabled [ 4.051105] optee: initialized driver [ 4.056915] nvpmodel: initialized successfully [ 4.058358] tegra_hv: get_hvd: not initialized yet [ 4.063155] user_ivc_mempool: hypervisor not present [ 4.069462] usbcore: registered new interface driver snd-usb-audio [ 4.075570] u32 classifier [ 4.076875] input device check on [ 4.080593] Actions configured [ 4.084476] Initializing XFRM netlink socket [ 4.089343] NET: Registered protocol family 10 [ 4.095985] Segment Routing with IPv6 [ 4.096770] NET: Registered protocol family 17 [ 4.100764] NET: Registered protocol family 15 [ 4.105433] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.119058] Bluetooth: RFCOMM socket layer initialized [ 4.123702] Bluetooth: RFCOMM ver 1.11 [ 4.127327] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.133441] Bluetooth: HIDP socket layer initialized [ 4.139008] 9pnet: Installing 9P2000 support [ 4.142650] Key type dns_resolver registered [ 4.148385] registered taskstats version 1 [ 4.151096] Loading compiled-in X.509 certificates [ 4.164233] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.167167] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.176999] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.179300] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.187551] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.196180] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.310691] tegra194-pcie 14160000.pcie: Link up [ 4.313765] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.313954] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.314121] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.314373] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.314693] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.315070] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.315530] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.327511] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.327987] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.328521] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.330062] pci 0004:01:00.0: supports D1 D2 [ 4.330245] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.341103] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.341425] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.341653] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.342074] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.342403] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.342668] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.345473] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.352891] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.361163] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.371771] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.375965] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.382074] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.388601] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.397577] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.399378] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.407568] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.416304] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.531463] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.531966] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.532388] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.532585] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.532801] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.533021] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.533632] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.534248] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.553831] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.554164] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.556387] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.557808] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.559412] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.561047] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.561957] pci 0005:00:00.0: Removing from iommu group 7 [ 5.562365] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.595558] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.620758] host1x 13e10000.host1x: initialized [ 5.622268] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.623343] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.624632] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.625343] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.626737] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.627472] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.628717] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.629603] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.630789] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.631422] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.641426] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.648389] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.658775] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.665414] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.675361] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.682718] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.692471] falcon 15340000.vic: Adding to iommu group 17 [ 5.707842] falcon 15340000.vic: initialized [ 5.708902] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.715124] falcon 15380000.nvjpg: initialized [ 5.715726] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.725519] falcon 154c0000.nvenc: initialized [ 5.726126] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.736643] falcon 15a80000.nvenc1: initialized [ 5.737275] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.749081] nvdec 15480000.nvdec: initialized [ 5.749632] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.758843] nvdec 15140000.nvdec1: initialized [ 5.759445] tsec 15500000.tsec: Adding to iommu group 18 [ 5.765429] tsec 15500000.tsec: initialized [ 5.765930] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.772943] tsec 15100000.tsecb: initialized [ 5.776702] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.804912] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.817015] gpio-374 (wifi-enable): hogged as output/high [ 5.817360] gpio-431 (camera-control-output-low): hogged as output/low [ 5.817681] gpio-432 (camera-control-output-low): hogged as output/low [ 5.819675] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.821639] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.822196] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.823562] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.829057] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.834985] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.840601] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.848872] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.856185] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.868299] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.872639] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.878763] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.887663] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.896884] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.904170] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.911793] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.917654] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.927612] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.933787] pva 16000000.pva0: Adding to iommu group 22 [ 5.960741] pva 16000000.pva0: initialized [ 5.965152] pva 16800000.pva1: Adding to iommu group 23 [ 5.976171] pva 16800000.pva1: initialized [ 5.980139] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.995547] nvdla 15880000.nvdla0: initialized [ 5.997053] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.014480] nvdla 158c0000.nvdla1: initialized [ 6.017284] tegradc 15200000.display: Adding to iommu group 26 [ 6.026922] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.027236] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.027887] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.028141] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.028477] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.028556] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.029118] tegradccommon 15200000.display-hub: dma mapping done [ 6.029223] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.029501] tegradc 15210000.display: Adding to iommu group 26 [ 6.029601] tegra_cec 3960000.tegra_cec: probed [ 6.036883] tegradc 15210000.display: disp0 connected to head1->sor [ 6.040150] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.045840] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.053599] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.058694] tegradc 15210000.display: DT parsed successfully [ 6.065708] kfuse 3830000.kfuse: initialized [ 6.071180] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.083864] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.089639] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.096649] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.103227] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.112346] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.117557] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.127290] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.132763] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.153253] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.153640] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.155603] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.164122] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.172753] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.179238] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.186608] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.193842] usb usb1: Product: xHCI Host Controller [ 6.199029] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.205139] usb usb1: SerialNumber: 3610000.xhci [ 6.210849] hub 1-0:1.0: USB hub found [ 6.213592] hub 1-0:1.0: 4 ports detected [ 6.218400] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.223020] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.230886] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.238798] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.246431] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.253691] usb usb2: Product: xHCI Host Controller [ 6.258415] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.264886] usb usb2: SerialNumber: 3610000.xhci [ 6.270382] hub 2-0:1.0: USB hub found [ 6.273121] hub 2-0:1.0: 4 ports detected [ 6.315752] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.323455] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.325713] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.325930] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.340569] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.341667] tegra194-cpufreq ccplex: probed with BWMGR [ 6.343023] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.343550] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.343956] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.345181] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.352874] tegra194-vi5 15c10000.vi: initialized [ 6.354793] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.355062] generic_infoframe_type: 0x87 [ 6.355948] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.357269] tegradc 15200000.display: DT parsed successfully [ 6.363722] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.369306] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.370585] mmc0: CQHCI version 5.10 [ 6.377450] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.386757] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.388735] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.395521] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.395530] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.399580] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.403485] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.410649] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.418703] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.426615] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.426677] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.434373] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.441549] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.446963] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.448220] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.454403] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.465699] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.472347] nvethernet 2490000.ethernet: Macsec not supported [ 6.474627] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.485349] mmc0: Command Queue Engine enabled [ 6.485481] tegradc 15200000.display: probed [ 6.534566] mmc0: periodic cache flush enabled [ 6.534614] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.538862] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.548112] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.554171] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.559006] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.563764] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.570918] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.585510] Console: switching to colour frame buffer device 240x67 [ 6.586285] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.588813] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.591186] tegradc 15200000.display: fb registered [ 6.599256] tegra-se-nvhost 15810000.se: initialized [ 6.605675] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.615661] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.621970] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.627853] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.633123] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.645887] tegra-se-nvhost 15820000.se: initialized [ 6.649231] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.652076] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.658476] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.665297] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.671936] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.678868] tegra-se-nvhost 15830000.se: initialized [ 6.683141] usb 1-2: Manufacturer: Generic [ 6.688924] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.694279] hub 1-2:1.0: USB hub found [ 6.698925] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.703743] hub 1-2:1.0: 4 ports detected [ 6.709294] tegra-se-nvhost 15840000.se: initialized [ 6.713788] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.719268] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.727381] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.734162] tegra_actmon d230000.actmon: in actmon_register()... [ 6.740264] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.740274] random: crng init done [ 6.740975] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.746065] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.753906] Extcon AUX1(HDMI) enable [ 6.754034] tegradc 15210000.display: disp1 connected to head1->sor [ 6.757463] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.764535] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.769789] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.770583] hvc_sysfs: hypervisor is not present [ 6.773225] tegradc 15210000.display: DT parsed successfully [ 6.794934] ALSA device list: [ 6.802307] tegradc 15210000.display: Display dc.00000000831e7fcb registered with id=1 [ 6.806637] No soundcards found. [ 6.812769] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.824110] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.827293] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.833448] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.833454] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.833462] usb 2-3: Manufacturer: Generic [ 6.848598] tegradc 15210000.display: probed [ 6.866061] hub 2-3:1.0: USB hub found [ 6.872464] tegradc 15210000.display: fb registered [ 6.874312] hub 2-3:1.0: 4 ports detected [ 6.875879] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.875885] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.875892] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.878395] Freeing unused kernel memory: 3968K [ 6.906360] tegradc 15210000.display: blank - powerdown 榳ARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk 墁 6.911694] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.911698] Extcon DP: HPD disabled [ 6.911702] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.911734] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.911742] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.911790] tegradc 15200000.display: blank - powerdown [ 6.911809] Run /init as init process [ 6.946595] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.947531] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.947535] Extcon AUX1(HDMI) disable [ 6.971175] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.972094] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.984342] tegradc 15200000.display: unblank [ 6.985753] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.985960] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.992070] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.994009] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.998170] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.998174] Extcon AUX1(HDMI) enable [ 7.010791] tegradc 15200000.display: sync windows ret = 246 [ 7.043555] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.047890] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.054185] Extcon HDMI: HPD enabled [ 7.057854] tegradc 15200000.display: hdmi: plugged [ 7.098937] Root device found: mmcblk0p1 [ 7.102376] Found dev node: /dev/mmcblk0p1 [ 7.103757] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.105311] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.106793] usb 1-3: Product: Bluetooth Radio [ 7.108103] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.108117] usb 1-3: Manufacturer: Realtek [ 7.108127] usb 1-3: SerialNumber: 00e04c000001 [ 7.109534] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.138169] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.143628] Rootfs mounted over mmcblk0p1 [ 7.174284] Switching from initrd to actual rootfs [ 7.333932] systemd[1]: System time before build time, advancing clock. [ 7.405622] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.410775] systemd[1]: Detected architecture arm64. [ 7.461589] systemd[1]: Set hostname to . [ 7.629671] systemd-sysv-generator[251]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.974788] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.976511] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.982266] systemd[1]: Created slice system-modprobe.slice. [ 7.986960] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.991136] systemd[1]: Created slice User and Session Slice. [ 7.994499] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.998662] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.002081] systemd[1]: Reached target User and Group Name Lookups. [ 8.005412] systemd[1]: Reached target Slices. [ 8.008528] systemd[1]: Reached target Swap. [ 8.012541] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.016152] systemd[1]: Listening on Syslog Socket. [ 8.019625] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.022916] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.027076] systemd[1]: Listening on Journal Audit Socket. [ 8.030585] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.034201] systemd[1]: Listening on Journal Socket. [ 8.037795] systemd[1]: Listening on udev Control Socket. [ 8.041192] systemd[1]: Listening on udev Kernel Socket. [ 8.049480] systemd[1]: Mounting Huge Pages File System... [ 8.060976] systemd[1]: Mounting POSIX Message Queue File System... [ 8.069180] systemd[1]: Mounting RPC Pipe File System... [ 8.077564] systemd[1]: Mounting Kernel Debug File System... [ 8.086380] systemd[1]: Mounting Kernel Trace File System... [ 8.096363] systemd[1]: Starting Journal Service... [ 8.105406] systemd[1]: Starting Set the console keyboard layout... [ 8.113986] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.117480] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.124131] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.132834] systemd[1]: Started Nameserver information manager. [ 8.136955] systemd[1]: Reached target Network (Pre). [ 8.143721] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.145540] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.153093] systemd[1]: Starting Load Kernel Modules... [ 8.160609] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.168296] systemd[1]: Starting udev Coldplug all Devices... [ 8.179680] systemd[1]: Mounted Huge Pages File System. [ 8.183383] systemd[1]: Mounted POSIX Message Queue File System. [ 8.186954] systemd[1]: Mounted RPC Pipe File System. [ 8.190461] systemd[1]: Mounted Kernel Debug File System. [ 8.193963] systemd[1]: Mounted Kernel Trace File System. [ 8.200261] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.202057] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.202241] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.202519] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.202570] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.202581] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.202585] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.203039] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.203203] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.203358] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.217912] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.221846] systemd[1]: nvfb-udev.service: Succeeded. [ 8.234461] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.246427] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.252928] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.254756] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.269367] systemd[1]: Starting Load/Save Random Seed... [ 8.277031] systemd[1]: Starting Create System Users... [ 8.320970] systemd[1]: Finished Load/Save Random Seed. [ 8.328869] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.328869] [ 8.334023] systemd[1]: Finished Create System Users. [ 8.343005] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.356925] systemd[1]: Finished Set the console keyboard layout. [ 8.367291] systemd[1]: Finished Load Kernel Modules. [ 8.371776] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.378331] systemd[1]: Mounting Kernel Configuration File System... [ 8.386377] systemd[1]: Started OP-TEE Client Supplicant. [ 8.394423] systemd[1]: Starting Apply Kernel Variables... [ 8.407778] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.412052] systemd[1]: Mounted Kernel Configuration File System. [ 8.415834] systemd[1]: Reached target Local File Systems (Pre). [ 8.418912] systemd[1]: Reached target Local File Systems. [ 8.421947] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 9.934811] hot-surface-alert cooling state: 0 -> 1 [ 9.983208] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.990220] imx219 9-0010: board setup failed [ 9.992415] imx219: probe of 9-0010 failed with error -121 [ 10.018598] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.033062] imx219 10-0010: board setup failed [ 10.034968] imx219: probe of 10-0010 failed with error -121 [ 10.464747] using random self ethernet address [ 10.466365] using random host ethernet address [ 11.430806] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.432558] Creating 1 MTD partitions on "spi6.0": [ 11.435526] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.036836] using random self ethernet address [ 12.036842] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.915554] nvidia: loading out-of-tree module taints kernel. [ 58.488395] watchdog: watchdog0: watchdog did not stop! [ 58.975516] Trying to unregister non-registered hwtime source [ 62.035149] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.036725] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ER ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 72500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨歊lk_early initialized ?TC: 滵ail_early initialized 誏o殞use initialized hwwdt initialized 鄚-se漮194_ec_get_ec_list: found 45 ecs 踄ure extern歋c initialized 跾潎mon_setup_monitors: found 3 monitors vmon initialized 鄟 D榥dc initialized fmon_populate_monitors: found 73 monitors 賏 found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 歊lk_dt_late initialized noc_late initialized ?漥m_post initialized dbells initialized ? 0歍mce initialized ?歊vc initialized ?23:20 UTC 2榥vfs_clk_mach_post initialized ?22 榥vfs_clk_platform_post initialized 跾ar歊vc_late initialized regulator_post initialized 踄h64 漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ?I/TC: WARNING漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ? This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.642] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.742] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... 觨/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000023] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000664] Console: colour dummy device 80x25 [ 0.002021] printk: console [tty0] enabled [ 0.002080] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002115] pid_max: default: 32768 minimum: 301 [ 0.002286] LSM: Security Framework initializing [ 0.002342] Yama: becoming mindful. [ 0.002384] SELinux: Initializing. [ 0.002528] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002565] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005657] rcu: Hierarchical SRCU implementation. [ 0.005915] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006739] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006789] DTB Build time: Aug 10 2022 20:31:49 [ 0.009912] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010172] Remapping and enabling EFI services. [ 0.012432] smp: Bringing up secondary CPUs ... [ 0.045779] Detected PIPT I-cache on CPU1 [ 0.045889] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.077692] Detected PIPT I-cache on CPU2 [ 0.077839] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.107412] Detected PIPT I-cache on CPU3 [ 0.107549] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.137211] Detected PIPT I-cache on CPU4 [ 0.137309] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.167008] Detected PIPT I-cache on CPU5 [ 0.167159] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.167506] smp: Brought up 1 node, 6 CPUs [ 0.167666] SMP: Total of 6 processors activated. [ 0.167681] CPU features: detected: Privileged Access Never [ 0.167693] CPU features: detected: LSE atomic instructions [ 0.167705] CPU features: detected: User Access Override [ 0.167718] CPU features: detected: 32-bit EL0 Support [ 0.167730] CPU features: detected: RAS Extension Support [ 0.167741] CPU features: detected: CRC32 instructions [ 0.167754] CPU features: detected: 32-bit EL1 Support [ 0.235921] CPU: All CPU(s) started at EL2 [ 0.243354] devtmpfs: initialized [ 0.291351] Registered cp15_barrier emulation handler [ 0.291481] Registered setend emulation handler [ 0.291501] KASLR enabled [ 0.291772] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291794] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293118] pinctrl core: initialized pinctrl subsystem [ 0.294329] SMBIOS 3.0.0 present. [ 0.294357] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295098] NET: Registered protocol family 16 [ 0.297214] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297727] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298425] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298481] audit: initializing netlink subsys (disabled) [ 0.298745] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.299225] thermal_sys: Registered thermal governor 'step_wise' [ 0.299232] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299246] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.301504] cpuidle: using governor menu [ 0.301996] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.302484] ASID allocator initialised with 32768 entries [ 0.302699] Serial: AMBA PL011 UART driver [ 0.305910] Tegra reboot handler registered. [ 0.379835] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379994] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.380164] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380235] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.380359] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.380410] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380526] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380576] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380698] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.380747] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382962] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382994] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.383021] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.383047] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.383075] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.383100] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383124] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.383148] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.383173] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.383197] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.383221] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.383246] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.383271] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.383295] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383322] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383350] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383375] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.383466] mc-err: mcerr ops are set to t19x [ 0.397065] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397086] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397099] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397111] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404628] ACPI: Interpreter disabled. [ 0.405764] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.407029] iommu: Default domain type: Translated [ 0.407086] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407483] SCSI subsystem initialized [ 0.407653] usbcore: registered new interface driver usbfs [ 0.407696] usbcore: registered new interface driver hub [ 0.407730] usbcore: registered new device driver usb [ 0.408111] mc: Linux media interface: v0.10 [ 0.408142] videodev: Linux video capture interface: v2.00 [ 0.408435] pps_core: LinuxPPS API ver. 1 registered [ 0.408450] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408472] PTP clock support registered [ 0.408648] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.408951] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409055] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.409631] Registered efivars operations [ 0.415286] FPGA manager framework [ 0.415398] Advanced Linux Sound Architecture Driver Initialized. [ 0.415998] Bluetooth: Core ver 2.22 [ 0.416043] NET: Registered protocol family 31 [ 0.416061] Bluetooth: HCI device and connection manager initialized [ 0.416080] Bluetooth: HCI socket layer initialized [ 0.416098] Bluetooth: L2CAP socket layer initialized [ 0.416123] Bluetooth: SCO socket layer initialized [ 0.417719] camchar: rtcpu character device driver loaded [ 0.418643] clocksource: Switched to clocksource arch_sys_counter [ 0.723275] VFS: Disk quotas dquot_6.6.0 [ 0.723381] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.723714] pnp: PnP ACPI: disabled [ 0.735826] la/ptsa driver initialized. [ 0.735953] NET: Registered protocol family 2 [ 0.736128] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.741852] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.741969] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.742236] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.742718] TCP: Hash tables configured (established 65536 bind 65536) [ 0.742855] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.742952] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.743154] NET: Registered protocol family 1 [ 0.743793] RPC: Registered named UNIX socket transport module. [ 0.743811] RPC: Registered udp transport module. [ 0.743841] RPC: Registered tcp transport module. [ 0.743854] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.743878] PCI: CLS 0 bytes, default 64 [ 0.744065] Trying to unpack rootfs image as initramfs... [ 0.933107] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.935441] Freeing initrd memory: 8196K [ 0.939356] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.939396] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.939431] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.939836] kvm [1]: IPA Size Limit: 40 bits [ 0.940491] kvm [1]: vgic interrupt IRQ9 [ 0.941144] kvm [1]: VHE mode initialized successfully [ 0.943036] Initialise system trusted keyrings [ 0.943352] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.951258] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.952124] NFS: Registering the id_resolver key type [ 0.952157] Key type id_resolver registered [ 0.952173] Key type id_legacy registered [ 0.952298] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.952347] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.952386] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.962801] NET: Registered protocol family 38 [ 0.962824] Key type asymmetric registered [ 0.962838] Asymmetric key parser 'x509' registered [ 0.962882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.963189] io scheduler mq-deadline registered [ 0.963209] io scheduler kyber registered [ 0.969191] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.972109] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.972241] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.972367] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.972470] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.972543] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.977735] scrncapt: init (heads:4 wins:6 planes:4) [ 0.978000] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.978823] EINJ: ACPI disabled. [ 0.982015] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.982070] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.982085] tegra-pmc: ### PMC reset level: L1 [ 0.982098] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.982167] tegra-pmc: PMC Prod config success [ 0.987830] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.002348] random: fast init done [ 1.004511] printk: console [ttyTCU0] enabled [ 2.544976] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.549799] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.554413] arm-smmu 10000000.iommu: stage 1 translation [ 2.559527] arm-smmu 10000000.iommu: stage 2 translation [ 2.565288] arm-smmu 10000000.iommu: nested translation [ 2.570366] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.577542] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.588949] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.590926] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.597227] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.605218] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.610267] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.614989] arm-smmu 12000000.iommu: stage 1 translation [ 2.620759] arm-smmu 12000000.iommu: stage 2 translation [ 2.625927] arm-smmu 12000000.iommu: nested translation [ 2.631619] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.638788] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.650118] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.651653] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.658470] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.665706] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.675595] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.678923] tegra_profiler: auth: init [ 2.683158] THERMAL EST: found 3 subdevs [ 2.686280] THERMAL EST num_resources: 0 [ 2.690420] [THERMAL EST subdev 0] [ 2.693482] [THERMAL EST subdev 1] [ 2.697144] [THERMAL EST subdev 2] [ 2.700154] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.706657] THERMAL EST: thz register success. [ 2.710838] THERMAL EST: end of probe, return err: 0 [ 2.716382] nvsciipc: loaded module [ 2.723431] tun: Universal TUN/TAP device driver, 1.6 [ 2.725535] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.731900] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.737714] e1000e: Intel(R) PRO/1000 Network Driver [ 2.742388] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.748718] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.754022] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.760167] PPP generic driver version 2.4.2 [ 2.764428] PPP BSD Compression module registered [ 2.768999] PPP Deflate Compression module registered [ 2.774247] PPP MPPE Compression module registered [ 2.779031] usbcore: registered new interface driver r8152 [ 2.784766] usbcore: registered new interface driver asix [ 2.789842] usbcore: registered new interface driver ax88179_178a [ 2.795965] usbcore: registered new interface driver cdc_ether [ 2.802175] usbcore: registered new interface driver net1080 [ 2.807779] usbcore: registered new interface driver cdc_subset [ 2.813553] usbcore: registered new interface driver zaurus [ 2.819284] usbcore: registered new interface driver cdc_ncm [ 2.824937] usbcore: registered new interface driver aqc111 [ 2.830552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.836912] ohci-pci: OHCI PCI platform driver [ 2.840941] ohci-platform: OHCI generic platform driver [ 2.846734] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.853364] usbcore: registered new interface driver uas [ 2.857518] usbcore: registered new interface driver usb-storage [ 2.863383] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.869697] mousedev: PS/2 mouse device common for all mice [ 2.874433] usbcore: registered new interface driver xpad [ 2.882713] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.885363] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.893194] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.899755] i2c /dev entries driver [ 2.903063] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.908630] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.914226] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.919612] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.924938] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.930447] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.935876] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.949353] device-mapper: uevent: version 1.0.3 [ 2.949813] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.955984] cpuidle: Initializing cpuidle driver [ 2.960046] sdhci: Secure Digital Host Controller Interface driver [ 2.964743] sdhci: Copyright(c) Pierre Ossman [ 2.969097] Synopsys Designware Multimedia Card Interface Driver [ 2.975034] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.981058] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.981836] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.994512] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.016985] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.027073] vdd-1v0: supplied by regulator-dummy [ 3.032666] vdd-1v8-hs: supplied by regulator-dummy [ 3.037548] vdd-1v8-ls: supplied by regulator-dummy [ 3.042443] vdd-1v8-ao: supplied by regulator-dummy [ 3.046438] vddio-ddr-1v1: supplied by regulator-dummy [ 3.051085] vdd-rtc: supplied by regulator-dummy [ 3.052876] spmic-ldo1: supplied by regulator-dummy [ 3.054149] vdd-ao-3v3: supplied by regulator-dummy [ 3.060464] vddio-emmc-3v3: supplied by regulator-dummy [ 3.066788] spmic-ldo4: supplied by regulator-dummy [ 3.068072] vdd-usb-3v3: supplied by regulator-dummy [ 3.074337] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.080544] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.086215] spmic-ldo8: supplied by vdd-1v8-ls [ 3.087700] gpio-510 (gpio_default): hogged as output/high [ 3.089114] gpio-511 (gpio_default): hogged as output/high [ 3.092088] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.227905] max77686-rtc max77620-rtc: registered as rtc0 [ 3.228988] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.229318] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 4.073790] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.074968] hid: raw HID events driver (C) Jiri Kosina [ 4.075843] usbcore: registered new interface driver usbhid [ 4.076035] usbhid: USB HID core driver [ 4.078144] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.079487] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 27.180775] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.254825] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.858 ms) 墁 4.163744] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.164591] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.165832] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.166870] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.168527] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.169390] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.170268] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.172014] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.172235] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.175194] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.180323] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.186556] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.191703] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.198341] denver_knobs_init:MTS_VERSION:55637613 [ 4.209620] t19x_cache tegra-cache: probed [ 4.212329] optee: probing for conduit method. [ 4.213230] optee: revision 3.16 (65cc2218) [ 4.214356] optee: dynamic shared memory is enabled [ 4.218710] optee: initialized driver [ 4.225429] nvpmodel: initialized successfully [ 4.226414] tegra_hv: get_hvd: not initialized yet [ 4.231158] user_ivc_mempool: hypervisor not present [ 4.237072] usbcore: registered new interface driver snd-usb-audio [ 4.243432] u32 classifier [ 4.244854] input device check on [ 4.248718] Actions configured [ 4.252035] Initializing XFRM netlink socket [ 4.256837] NET: Registered protocol family 10 [ 4.264258] Segment Routing with IPv6 [ 4.264672] NET: Registered protocol family 17 [ 4.268748] NET: Registered protocol family 15 [ 4.272925] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.286516] Bluetooth: RFCOMM socket layer initialized [ 4.291132] Bluetooth: RFCOMM ver 1.11 [ 4.295309] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.300897] Bluetooth: HIDP socket layer initialized [ 4.307492] 9pnet: Installing 9P2000 support [ 4.310554] Key type dns_resolver registered [ 4.316043] registered taskstats version 1 [ 4.318782] Loading compiled-in X.509 certificates [ 4.332597] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.334915] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.344484] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.346714] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.355534] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.363643] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.478747] tegra194-pcie 14160000.pcie: Link up [ 4.481834] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.482016] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.482242] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.482692] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.482870] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.483357] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.483803] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.496298] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.496941] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.497359] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.499107] pci 0004:01:00.0: supports D1 D2 [ 4.499260] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.510822] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.511119] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.511537] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.511948] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.512247] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.512442] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.513532] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.520958] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.529204] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.539807] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.544531] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.550061] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.556761] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.565557] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.567404] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.575588] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.584314] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.695288] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.695785] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.695946] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.696096] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.696381] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.696572] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.697000] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.697617] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.717098] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.717517] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.719395] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.720459] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.721933] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.723887] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.724896] pci 0005:00:00.0: Removing from iommu group 7 [ 5.725360] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.759562] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.783355] host1x 13e10000.host1x: initialized [ 5.785062] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.785875] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.787253] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.787941] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.789199] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.789811] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.791260] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.791937] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.792892] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.795511] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.805505] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.812188] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.822435] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.829211] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.839132] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.846465] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.856381] falcon 15340000.vic: Adding to iommu group 17 [ 5.870517] falcon 15340000.vic: initialized [ 5.871390] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.876424] falcon 15380000.nvjpg: initialized [ 5.876878] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.888782] falcon 154c0000.nvenc: initialized [ 5.889308] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.899399] falcon 15a80000.nvenc1: initialized [ 5.900006] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.912635] nvdec 15480000.nvdec: initialized [ 5.913188] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.922682] nvdec 15140000.nvdec1: initialized [ 5.923148] tsec 15500000.tsec: Adding to iommu group 18 [ 5.928859] tsec 15500000.tsec: initialized [ 5.929267] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.936334] tsec 15100000.tsecb: initialized [ 5.940256] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.968923] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.981634] gpio-374 (wifi-enable): hogged as output/high [ 5.981896] gpio-431 (camera-control-output-low): hogged as output/low [ 5.982301] gpio-432 (camera-control-output-low): hogged as output/low [ 5.983948] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.985537] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.985993] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.987386] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.992846] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.998864] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.004557] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.012899] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.020015] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.031107] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.036581] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.042384] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.051215] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.060798] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.067577] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.075613] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.081506] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.091384] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.097666] pva 16000000.pva0: Adding to iommu group 22 [ 6.124609] pva 16000000.pva0: initialized [ 6.129225] pva 16800000.pva1: Adding to iommu group 23 [ 6.140738] pva 16800000.pva1: initialized [ 6.145389] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.160112] nvdla 15880000.nvdla0: initialized [ 6.161539] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.170665] nvdla 158c0000.nvdla1: initialized [ 6.174710] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.174930] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.175053] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.175634] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.175706] tegradc 15200000.display: Adding to iommu group 26 [ 6.176178] tegradc 15210000.display: Adding to iommu group 26 [ 6.176190] tegradccommon 15200000.display-hub: dma mapping done [ 6.176225] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.184022] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.187615] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.193839] generic_infoframe_type: 0x87 [ 6.199397] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.203549] tegradc 15200000.display: DT parsed successfully [ 6.209171] tegra_cec 3960000.tegra_cec: probed [ 6.215037] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.220419] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.231895] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.241114] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.243102] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.249499] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.256705] kfuse 3830000.kfuse: initialized [ 6.265343] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.269600] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.274915] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.276473] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.281306] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.281899] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.291605] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.299298] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.305651] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.312301] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.319964] tegradc 15210000.display: disp0 connected to head1->sor [ 6.327414] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.334047] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.340925] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.345941] tegradc 15210000.display: DT parsed successfully [ 6.355471] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.361729] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.378688] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.399562] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.404916] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.409369] random: crng init done [ 6.413550] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.425542] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.432043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.439776] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.447102] usb usb1: Product: xHCI Host Controller [ 6.451694] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.457857] usb usb1: SerialNumber: 3610000.xhci [ 6.463618] hub 1-0:1.0: USB hub found [ 6.466753] hub 1-0:1.0: 4 ports detected [ 6.471225] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.476007] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.483868] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.491720] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.499463] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.506723] usb usb2: Product: xHCI Host Controller [ 6.511420] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.517619] usb usb2: SerialNumber: 3610000.xhci [ 6.523394] hub 2-0:1.0: USB hub found [ 6.526328] hub 2-0:1.0: 4 ports detected [ 6.567991] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.574183] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.575848] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.576071] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.589945] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.591125] tegra194-cpufreq ccplex: probed with BWMGR [ 6.592444] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.592908] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.593387] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.594664] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.602104] tegra194-vi5 15c10000.vi: initialized [ 6.603523] tegradc 15210000.display: disp0 connected to head1->sor [ 6.603666] mmc0: CQHCI version 5.10 [ 6.605051] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.605310] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.605316] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.605323] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.605328] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.605332] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.606308] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.610756] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.616142] tegradc 15210000.display: DT parsed successfully [ 6.624319] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.630460] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.637153] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.691334] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.693613] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.697389] generic_infoframe_type: 0x87 [ 6.706075] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.708850] tegradc 15200000.display: DT parsed successfully [ 6.722393] tegradc 15200000.display: Display dc.000000003f7a5868 registered with id=0 [ 6.722481] nvethernet 2490000.ethernet: Macsec not supported [ 6.737344] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.737568] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.744582] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.744585] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.760967] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.770142] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.774680] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.774887] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.780960] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.805367] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.806090] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.812839] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.818995] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.819886] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.822150] tegradc 15200000.display: probed [ 6.827238] tegra-se-nvhost 15810000.se: initialized [ 6.854651] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.855719] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.862329] tegra-se-nvhost 15820000.se: initialized [ 6.868258] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.873123] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.879161] Console: switching to colour frame buffer device 240x67 [ 6.879292] mmc0: Command Queue Engine enabled [ 6.879529] tegra-se-nvhost 15830000.se: initialized [ 6.880680] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.881220] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.881868] tegra-se-nvhost 15840000.se: initialized [ 6.883486] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.884949] tegra_actmon d230000.actmon: in actmon_register()... [ 6.885135] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.885399] tegradc 15200000.display: fb registered [ 6.885500] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.886023] hvc_sysfs: hypervisor is not present [ 6.889827] mmc0: periodic cache flush enabled [ 6.889841] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.890272] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.894735] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.900697] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.915449] ALSA device list: [ 6.916674] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.916889] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.929990] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.934400] No soundcards found. [ 6.977619] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.010258] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.011845] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.018839] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.026566] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.033693] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.033704] usb 1-2: Manufacturer: Generic [ 7.042415] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.048230] hub 1-2:1.0: USB hub found [ 7.050306] Extcon AUX1(HDMI) enable [ 7.058883] hub 1-2:1.0: 4 ports detected [ 7.062001] tegradc 15210000.display: disp1 connected to head1->sor [ 7.075933] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.083370] tegradc 15210000.display: DT parsed successfully [ 7.088915] tegradc 15210000.display: Display dc.0000000087f40f67 registered with id=1 [ 7.097050] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.102818] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.115911] tegradc 15210000.display: probed [ 7.116215] tegradc 15210000.display: fb registered [ 7.121616] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.125818] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.127494] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.127581] Freeing unused kernel memory: 3968K [ 7.133447] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.151108] tegradc 15210000.display: blank - powerdown [ 7.156296] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.158727] Run /init as init process [ 7.164242] Extcon DP: HPD disabled [ 7.171406] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.171415] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.171421] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.176074] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.184185] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.184193] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.199504] usb 2-3: Manufacturer: Generic [ 7.222558] hub 2-3:1.0: USB hub found 榳ARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk 墁 7.222820] tegradc 15200000.display: blank - powerdown [ 7.224606] hub 2-3:1.0: 4 ports detected [ 7.238631] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.261434] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.261439] Extcon AUX1(HDMI) disable [ 7.270689] Root device found: mmcblk0p1 [ 7.272724] Found dev node: /dev/mmcblk0p1 [ 7.284965] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.286663] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.294650] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.300370] tegradc 15200000.display: unblank [ 7.301486] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.301680] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.303179] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.303184] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.307409] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.309274] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.309312] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.313340] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.313344] Extcon AUX1(HDMI) enable [ 7.313357] Rootfs mounted over mmcblk0p1 [ 7.326065] tegradc 15200000.display: sync windows ret = 247 [ 7.350869] Switching from initrd to actual rootfs [ 7.370380] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.377657] Extcon HDMI: HPD enabled [ 7.381060] tegradc 15200000.display: hdmi: plugged [ 7.447896] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.449413] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.450853] usb 1-3: Product: Bluetooth Radio [ 7.452174] usb 1-3: Manufacturer: Realtek [ 7.453485] usb 1-3: SerialNumber: 00e04c000001 [ 7.523852] systemd[1]: System time before build time, advancing clock. [ 7.596695] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.601860] systemd[1]: Detected architecture arm64. [ 7.649928] systemd[1]: Set hostname to . [ 7.814859] systemd-sysv-generator[250]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.163835] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.165492] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.171035] systemd[1]: Created slice system-modprobe.slice. [ 8.175815] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.179882] systemd[1]: Created slice User and Session Slice. [ 8.183327] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.187304] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.190489] systemd[1]: Reached target User and Group Name Lookups. [ 8.193492] systemd[1]: Reached target Slices. [ 8.196509] systemd[1]: Reached target Swap. [ 8.200409] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.204035] systemd[1]: Listening on Syslog Socket. [ 8.207502] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.210778] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.214993] systemd[1]: Listening on Journal Audit Socket. [ 8.218537] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.223601] systemd[1]: Listening on Journal Socket. [ 8.229669] systemd[1]: Listening on udev Control Socket. [ 8.235567] systemd[1]: Listening on udev Kernel Socket. [ 8.246796] systemd[1]: Mounting Huge Pages File System... [ 8.255375] systemd[1]: Mounting POSIX Message Queue File System... [ 8.263320] systemd[1]: Mounting RPC Pipe File System... [ 8.271990] systemd[1]: Mounting Kernel Debug File System... [ 8.280285] systemd[1]: Mounting Kernel Trace File System... [ 8.291487] systemd[1]: Starting Journal Service... [ 8.301501] systemd[1]: Starting Set the console keyboard layout... [ 8.309610] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.313057] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.319197] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.328080] systemd[1]: Started Nameserver information manager. [ 8.332621] systemd[1]: Reached target Network (Pre). [ 8.339408] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.341168] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.349367] systemd[1]: Starting Load Kernel Modules... [ 8.356893] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.365728] systemd[1]: Starting udev Coldplug all Devices... [ 8.375921] systemd[1]: Mounted Huge Pages File System. [ 8.379600] systemd[1]: Mounted POSIX Message Queue File System. [ 8.383196] systemd[1]: Mounted RPC Pipe File System. [ 8.384633] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.391870] systemd[1]: Mounted Kernel Debug File System. [ 8.395630] systemd[1]: Mounted Kernel Trace File System. [ 8.397160] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.397980] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.397985] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.397996] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.398001] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.398269] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.398448] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.408537] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.410079] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.411986] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.417404] systemd[1]: nvfb-udev.service: Succeeded. [ 8.428653] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.444327] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.449193] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.451048] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.457046] systemd[1]: Starting Load/Save Random Seed... [ 8.466725] systemd[1]: Starting Create System Users... [ 8.507520] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.507520] [ 8.511529] systemd[1]: Finished Load/Save Random Seed. [ 8.533026] systemd[1]: Finished Load Kernel Modules. [ 8.541847] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.549178] systemd[1]: Mounting Kernel Configuration File System... [ 8.556997] systemd[1]: Started OP-TEE Client Supplicant. [ 8.565447] systemd[1]: Starting Apply Kernel Variables... [ 8.575466] systemd[1]: Finished Set the console keyboard layout. [ 8.579999] systemd[1]: Mounted Kernel Configuration File System. [ 8.590576] systemd[1]: Finished Create System Users. [ 8.599209] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.141965] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.150275] imx219 9-0010: board setup failed [ 10.151539] imx219: probe of 9-0010 failed with error -121 [ 10.173578] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.176946] hot-surface-alert cooling state: 0 -> 1 [ 10.184729] imx219 10-0010: board setup failed [ 10.186067] imx219: probe of 10-0010 failed with error -121 [ 10.333361] using random self ethernet address [ 10.334540] using random host ethernet address [ 11.990798] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.990804] Creating 1 MTD partitions on "spi6.0": [ 11.990812] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.354059] using random self ethernet address [ 12.355280] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.981615] nvidia: loading out-of-tree module taints kernel. [ 58.248466] watchdog: watchdog0: watchdog did not stop! [ 58.719530] Trying to unregister non-registered hwtime source [ 61.781540] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.783066] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99  ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 73000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨歊lk_early initialized ?TC: 滵ail_early initialized 誏o殞use initialized hwwdt initialized 鄚-se漮194_ec_get_ec_list: found 45 ecs 踄ure extern歋c initialized vmon_setup_monitors: found 3 monitors vmon initialized 跾l 榥dc initialized 覡殞mon_populate_monitors: found 73 monitors 賏 found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug歊lk_dt_late initialized ?滱oc_late initialized ?漥m_post initialized dbells initialized ? 0歍mce initialized ?歊vc initialized ?23:20 UTC 2榥vfs_clk_mach_post initialized ?22 榥vfs_clk_platform_post initialized 跾ar歊vc_late initialized regulator_post initialized 踄h64漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ? I/TC: WARNI漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] 誏G: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.549] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.576] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.647] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... 觨/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000778] Console: colour dummy device 80x25 [ 0.002104] printk: console [tty0] enabled [ 0.002182] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002219] pid_max: default: 32768 minimum: 301 [ 0.002443] LSM: Security Framework initializing [ 0.002516] Yama: becoming mindful. [ 0.002570] SELinux: Initializing. [ 0.002747] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002791] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005791] rcu: Hierarchical SRCU implementation. [ 0.006076] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007062] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007112] DTB Build time: Aug 10 2022 20:31:49 [ 0.010256] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010575] Remapping and enabling EFI services. [ 0.012625] smp: Bringing up secondary CPUs ... [ 0.041820] Detected PIPT I-cache on CPU1 [ 0.041880] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071415] Detected PIPT I-cache on CPU2 [ 0.071565] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101034] Detected PIPT I-cache on CPU3 [ 0.101179] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130831] Detected PIPT I-cache on CPU4 [ 0.130933] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161679] Detected PIPT I-cache on CPU5 [ 0.161822] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162122] smp: Brought up 1 node, 6 CPUs [ 0.162306] SMP: Total of 6 processors activated. [ 0.162403] CPU features: detected: Privileged Access Never [ 0.162434] CPU features: detected: LSE atomic instructions [ 0.162453] CPU features: detected: User Access Override [ 0.162487] CPU features: detected: 32-bit EL0 Support [ 0.162517] CPU features: detected: RAS Extension Support [ 0.162535] CPU features: detected: CRC32 instructions [ 0.162567] CPU features: detected: 32-bit EL1 Support [ 0.229378] CPU: All CPU(s) started at EL2 [ 0.234606] devtmpfs: initialized [ 0.282894] Registered cp15_barrier emulation handler [ 0.283043] Registered setend emulation handler [ 0.283064] KASLR enabled [ 0.283343] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.283365] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.284696] pinctrl core: initialized pinctrl subsystem [ 0.285716] SMBIOS 3.0.0 present. [ 0.285745] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.286360] NET: Registered protocol family 16 [ 0.288417] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.288911] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.289653] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.289703] audit: initializing netlink subsys (disabled) [ 0.289944] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.290457] thermal_sys: Registered thermal governor 'step_wise' [ 0.290464] thermal_sys: Registered thermal governor 'power_allocator' [ 0.290486] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.292660] cpuidle: using governor menu [ 0.293121] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.293502] ASID allocator initialised with 32768 entries [ 0.293738] Serial: AMBA PL011 UART driver [ 0.298337] Tegra reboot handler registered. [ 0.374443] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.374586] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.374762] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.374811] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374932] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374978] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375095] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375139] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.375286] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.375331] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.377641] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.377679] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.377708] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.377738] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.377769] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.377834] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377872] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377906] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377932] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377957] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.377982] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.378006] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.378034] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.378059] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.378083] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.378107] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.378131] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.378223] mc-err: mcerr ops are set to t19x [ 0.390012] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390036] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390049] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390062] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396814] ACPI: Interpreter disabled. [ 0.397946] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399169] iommu: Default domain type: Translated [ 0.399234] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399607] SCSI subsystem initialized [ 0.399756] usbcore: registered new interface driver usbfs [ 0.399797] usbcore: registered new interface driver hub [ 0.399833] usbcore: registered new device driver usb [ 0.400225] mc: Linux media interface: v0.10 [ 0.400254] videodev: Linux video capture interface: v2.00 [ 0.400555] pps_core: LinuxPPS API ver. 1 registered [ 0.400567] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400587] PTP clock support registered [ 0.400806] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401087] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401175] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.401806] Registered efivars operations [ 0.407108] FPGA manager framework [ 0.407212] Advanced Linux Sound Architecture Driver Initialized. [ 0.407777] Bluetooth: Core ver 2.22 [ 0.407815] NET: Registered protocol family 31 [ 0.407828] Bluetooth: HCI device and connection manager initialized [ 0.407845] Bluetooth: HCI socket layer initialized [ 0.407862] Bluetooth: L2CAP socket layer initialized [ 0.407884] Bluetooth: SCO socket layer initialized [ 0.409515] camchar: rtcpu character device driver loaded [ 0.410303] clocksource: Switched to clocksource arch_sys_counter [ 0.701125] VFS: Disk quotas dquot_6.6.0 [ 0.701213] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.701594] pnp: PnP ACPI: disabled [ 0.714772] la/ptsa driver initialized. [ 0.714893] NET: Registered protocol family 2 [ 0.715058] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.721615] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.721759] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.722003] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.722466] TCP: Hash tables configured (established 65536 bind 65536) [ 0.722625] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722719] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722906] NET: Registered protocol family 1 [ 0.723571] RPC: Registered named UNIX socket transport module. [ 0.723586] RPC: Registered udp transport module. [ 0.723596] RPC: Registered tcp transport module. [ 0.723606] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.723633] PCI: CLS 0 bytes, default 64 [ 0.723819] Trying to unpack rootfs image as initramfs... [ 0.908860] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.911192] Freeing initrd memory: 8196K [ 0.915161] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.915200] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.915235] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.915672] kvm [1]: IPA Size Limit: 40 bits [ 0.916222] kvm [1]: vgic interrupt IRQ9 [ 0.916840] kvm [1]: VHE mode initialized successfully [ 0.918515] Initialise system trusted keyrings [ 0.918803] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.924342] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.925236] NFS: Registering the id_resolver key type [ 0.925273] Key type id_resolver registered [ 0.925289] Key type id_legacy registered [ 0.925372] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.925397] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.925434] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.935122] NET: Registered protocol family 38 [ 0.935145] Key type asymmetric registered [ 0.935161] Asymmetric key parser 'x509' registered [ 0.935205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.935465] io scheduler mq-deadline registered [ 0.935486] io scheduler kyber registered [ 0.941514] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.944670] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.944751] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.944835] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.944909] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.944979] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.950562] scrncapt: init (heads:4 wins:6 planes:4) [ 0.950840] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.951784] EINJ: ACPI disabled. [ 0.955080] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.955105] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.955121] tegra-pmc: ### PMC reset level: L1 [ 0.955136] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.955188] tegra-pmc: PMC Prod config success [ 0.960587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.978206] random: fast init done [ 0.988679] printk: console [ttyTCU0] enabled [ 2.517784] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.522424] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.527014] arm-smmu 10000000.iommu: stage 1 translation [ 2.532809] arm-smmu 10000000.iommu: stage 2 translation [ 2.537995] arm-smmu 10000000.iommu: nested translation [ 2.543593] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.550768] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.562030] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.563890] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.570453] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.578122] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.583234] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.588214] arm-smmu 12000000.iommu: stage 1 translation [ 2.593466] arm-smmu 12000000.iommu: stage 2 translation [ 2.598897] arm-smmu 12000000.iommu: nested translation [ 2.604578] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.611760] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.622562] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.624600] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.631441] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.638812] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.648544] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.651668] tegra_profiler: auth: init [ 2.656094] THERMAL EST: found 3 subdevs [ 2.659546] THERMAL EST num_resources: 0 [ 2.663136] [THERMAL EST subdev 0] [ 2.666719] [THERMAL EST subdev 1] [ 2.670108] [THERMAL EST subdev 2] [ 2.673121] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.679490] THERMAL EST: thz register success. [ 2.683795] THERMAL EST: end of probe, return err: 0 [ 2.689010] nvsciipc: loaded module [ 2.695739] tun: Universal TUN/TAP device driver, 1.6 [ 2.698471] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.704858] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.710452] e1000e: Intel(R) PRO/1000 Network Driver [ 2.715358] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.721688] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.726991] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.733115] PPP generic driver version 2.4.2 [ 2.737135] PPP BSD Compression module registered [ 2.741711] PPP Deflate Compression module registered [ 2.747211] PPP MPPE Compression module registered [ 2.751991] usbcore: registered new interface driver r8152 [ 2.757722] usbcore: registered new interface driver asix [ 2.762795] usbcore: registered new interface driver ax88179_178a [ 2.768926] usbcore: registered new interface driver cdc_ether [ 2.775143] usbcore: registered new interface driver net1080 [ 2.780473] usbcore: registered new interface driver cdc_subset [ 2.786509] usbcore: registered new interface driver zaurus [ 2.792459] usbcore: registered new interface driver cdc_ncm [ 2.797881] usbcore: registered new interface driver aqc111 [ 2.803515] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.809611] ohci-pci: OHCI PCI platform driver [ 2.813902] ohci-platform: OHCI generic platform driver [ 2.819598] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.825912] usbcore: registered new interface driver uas [ 2.830209] usbcore: registered new interface driver usb-storage [ 2.836326] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.842591] mousedev: PS/2 mouse device common for all mice [ 2.847613] usbcore: registered new interface driver xpad [ 2.855460] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.858352] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.866139] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.872377] i2c /dev entries driver [ 2.876000] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.881733] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.887111] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.892521] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.897585] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.903105] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.908528] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.922151] device-mapper: uevent: version 1.0.3 [ 2.922570] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.928843] cpuidle: Initializing cpuidle driver [ 2.932912] sdhci: Secure Digital Host Controller Interface driver [ 2.937960] sdhci: Copyright(c) Pierre Ossman [ 2.941807] Synopsys Designware Multimedia Card Interface Driver [ 2.947962] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.954004] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.954728] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.967255] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.984836] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.993626] vdd-1v0: supplied by regulator-dummy [ 2.998964] vdd-1v8-hs: supplied by regulator-dummy [ 3.003606] vdd-1v8-ls: supplied by regulator-dummy [ 3.008256] vdd-1v8-ao: supplied by regulator-dummy [ 3.011986] vddio-ddr-1v1: supplied by regulator-dummy [ 3.016272] vdd-rtc: supplied by regulator-dummy [ 3.017837] spmic-ldo1: supplied by regulator-dummy [ 3.018937] vdd-ao-3v3: supplied by regulator-dummy [ 3.024961] vddio-emmc-3v3: supplied by regulator-dummy [ 3.031045] spmic-ldo4: supplied by regulator-dummy [ 3.032193] vdd-usb-3v3: supplied by regulator-dummy [ 3.039046] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.045069] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.050416] spmic-ldo8: supplied by vdd-1v8-ls [ 3.051768] gpio-510 (gpio_default): hogged as output/high [ 3.053941] gpio-511 (gpio_default): hogged as output/high [ 3.060837] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.199683] max77686-rtc max77620-rtc: registered as rtc0 [ 3.200907] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.201203] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 3.901167] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.902051] hid: raw HID events driver (C) Jiri Kosina [ 3.902753] usbcore: registered new interface driver usbhid [ 3.902926] usbhid: USB HID core driver [ 3.904774] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.905877] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 26.666080] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.741390] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.120 ms) 墁 3.991125] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.991724] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.992690] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.993273] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.994938] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.995465] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.995888] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.996971] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.997278] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.999018] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.007674] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.013807] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.019274] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.024760] denver_knobs_init:MTS_VERSION:55637613 [ 4.037378] t19x_cache tegra-cache: probed [ 4.039810] optee: probing for conduit method. [ 4.040695] optee: revision 3.16 (65cc2218) [ 4.041700] optee: dynamic shared memory is enabled [ 4.046192] optee: initialized driver [ 4.052244] nvpmodel: initialized successfully [ 4.053890] tegra_hv: get_hvd: not initialized yet [ 4.058552] user_ivc_mempool: hypervisor not present [ 4.064149] usbcore: registered new interface driver snd-usb-audio [ 4.070801] u32 classifier [ 4.072016] input device check on [ 4.076107] Actions configured [ 4.079347] Initializing XFRM netlink socket [ 4.084266] NET: Registered protocol family 10 [ 4.090555] Segment Routing with IPv6 [ 4.091609] NET: Registered protocol family 17 [ 4.096122] NET: Registered protocol family 15 [ 4.100523] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.114182] Bluetooth: RFCOMM socket layer initialized [ 4.118836] Bluetooth: RFCOMM ver 1.11 [ 4.122450] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.128545] Bluetooth: HIDP socket layer initialized [ 4.134310] 9pnet: Installing 9P2000 support [ 4.137950] Key type dns_resolver registered [ 4.143003] registered taskstats version 1 [ 4.146146] Loading compiled-in X.509 certificates [ 4.158232] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.161950] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.171611] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.174430] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.182657] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.191371] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.306304] tegra194-pcie 14160000.pcie: Link up [ 4.308985] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.309182] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.309315] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.309501] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.309664] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.309989] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.310426] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.321115] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.321631] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.322141] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.323683] pci 0004:01:00.0: supports D1 D2 [ 4.323841] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.334410] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.334760] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.335026] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.335376] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.335665] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.335834] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.340986] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.348543] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.356823] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.367041] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.371948] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.377578] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.384251] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.392788] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.395020] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.403206] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.411734] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.514451] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.515031] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.515254] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.515423] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.515627] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.515806] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.516128] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.516509] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.532963] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.533302] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.534970] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.535975] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.537295] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.538896] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.539654] pci 0005:00:00.0: Removing from iommu group 7 [ 5.539993] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.569289] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.590434] host1x 13e10000.host1x: initialized [ 5.592152] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.592984] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.594018] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.594785] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.595847] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.596478] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.597328] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.597973] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.607726] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.614599] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.624521] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.631587] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.641448] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.648360] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.658220] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.665468] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.675824] falcon 15340000.vic: Adding to iommu group 17 [ 5.689825] falcon 15340000.vic: initialized [ 5.690858] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.696043] falcon 15380000.nvjpg: initialized [ 5.696668] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.707644] falcon 154c0000.nvenc: initialized [ 5.708190] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.717770] falcon 15a80000.nvenc1: initialized [ 5.718338] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.729798] nvdec 15480000.nvdec: initialized [ 5.730425] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.741013] nvdec 15140000.nvdec1: initialized [ 5.741617] tsec 15500000.tsec: Adding to iommu group 18 [ 5.747189] tsec 15500000.tsec: initialized [ 5.747655] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.755087] tsec 15100000.tsecb: initialized [ 5.758495] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.783239] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.795061] gpio-374 (wifi-enable): hogged as output/high [ 5.795312] gpio-431 (camera-control-output-low): hogged as output/low [ 5.795537] gpio-432 (camera-control-output-low): hogged as output/low [ 5.797066] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.798791] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.800065] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.806820] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.811974] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.817975] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.823634] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.831688] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.838941] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.850170] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.855755] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.861818] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.870627] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.879654] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.887231] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.894686] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.900827] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.910692] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.916916] pva 16000000.pva0: Adding to iommu group 22 [ 5.943479] pva 16000000.pva0: initialized [ 5.948576] pva 16800000.pva1: Adding to iommu group 23 [ 5.959196] pva 16800000.pva1: initialized [ 5.963033] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.974835] nvdla 15880000.nvdla0: initialized [ 5.976415] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.992976] nvdla 158c0000.nvdla1: initialized [ 5.995744] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.995979] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.996259] tegradccommon 15200000.display-hub: dma mapping done [ 5.997866] tegradc 15200000.display: Adding to iommu group 26 [ 6.006252] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.006887] generic_infoframe_type: 0x87 [ 6.007124] tegradc 15200000.display: DT parsed successfully [ 6.007366] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.009579] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.012380] tegradc 15210000.display: Adding to iommu group 26 [ 6.013201] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.027800] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.031022] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.036305] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.036472] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.044666] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.050229] tegra_cec 3960000.tegra_cec: probed [ 6.058441] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.071370] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.071778] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.077091] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.089265] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.090793] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.106929] kfuse 3830000.kfuse: initialized [ 6.111514] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.111778] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.124735] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.125651] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.131281] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.140617] tegradc 15210000.display: disp0 connected to head1->sor [ 6.144578] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.150540] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.160691] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.166551] tegradc 15210000.display: DT parsed successfully [ 6.172723] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.178036] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.187781] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.201224] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.220647] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.221035] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.224292] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.232537] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.241202] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.248119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.255284] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.262514] usb usb1: Product: xHCI Host Controller [ 6.267489] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.273801] usb usb1: SerialNumber: 3610000.xhci [ 6.279305] hub 1-0:1.0: USB hub found [ 6.282646] hub 1-0:1.0: 4 ports detected [ 6.287080] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.291745] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.299612] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.307317] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.315202] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.322346] usb usb2: Product: xHCI Host Controller [ 6.327433] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.333633] usb usb2: SerialNumber: 3610000.xhci [ 6.339280] hub 2-0:1.0: USB hub found [ 6.342111] hub 2-0:1.0: 4 ports detected [ 6.380800] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.386075] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.387267] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.387443] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.400759] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.401800] tegra194-cpufreq ccplex: probed with BWMGR [ 6.403137] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.403815] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.404344] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.405605] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.417162] mmc0: CQHCI version 5.10 [ 6.418698] tegra194-vi5 15c10000.vi: initialized [ 6.420890] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.421577] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.426041] generic_infoframe_type: 0x87 [ 6.432222] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.436170] tegradc 15200000.display: DT parsed successfully [ 6.444005] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.449829] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.456042] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.456070] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.456080] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.464868] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.476748] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.477481] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.478314] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.478322] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.478327] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.528100] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.528687] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.543671] nvethernet 2490000.ethernet: Macsec not supported [ 6.543890] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.550662] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.555566] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.564751] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.569974] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.575779] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.590303] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.593814] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.601293] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.608345] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.614849] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.630279] tegradc 15200000.display: probed [ 6.630353] tegra-se-nvhost 15810000.se: initialized [ 6.643100] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.644427] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.651331] tegra-se-nvhost 15820000.se: initialized [ 6.657128] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.661964] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.667873] mmc0: Command Queue Engine enabled [ 6.668507] tegra-se-nvhost 15830000.se: initialized [ 6.671932] mmc0: periodic cache flush enabled [ 6.671948] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.678245] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.681753] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.688164] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.694134] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.712565] Console: switching to colour frame buffer device 240x67 [ 6.712841] tegra-se-nvhost 15840000.se: initialized [ 6.718042] tegradc 15200000.display: fb registered [ 6.722781] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.724707] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.728162] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.737653] tegra_actmon d230000.actmon: in actmon_register()... [ 6.754235] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.760098] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.760118] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.772956] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.773643] hvc_sysfs: hypervisor is not present [ 6.800295] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.800525] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.800766] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.804310] usb 1-2: Manufacturer: Generic [ 6.810412] hub 1-2:1.0: USB hub found [ 6.813399] hub 1-2:1.0: 4 ports detected [ 6.825529] ALSA device list: [ 6.825632] No soundcards found. 榳ARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk 墁 6.890735] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.892077] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.892319] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.893320] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.893516] Extcon AUX1(HDMI) enable [ 6.893814] tegradc 15210000.display: disp1 connected to head1->sor [ 6.894173] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.894576] tegradc 15210000.display: DT parsed successfully [ 6.894823] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.895216] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.897730] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.910831] tegradc 15210000.display: probed [ 6.911220] tegradc 15210000.display: fb registered [ 6.916657] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.920091] Freeing unused kernel memory: 3968K [ 6.920609] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.920649] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.940717] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.946219] tegradc 15210000.display: blank - powerdown [ 6.946389] Run /init as init process [ 6.951340] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.963262] Extcon DP: HPD disabled [ 6.967023] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.973500] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.973523] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.977927] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.994340] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.001686] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.006675] usb 2-3: Manufacturer: Generic [ 7.021772] hub 2-3:1.0: USB hub found [ 7.023811] hub 2-3:1.0: 4 ports detected [ 7.025649] tegradc 15200000.display: blank - powerdown [ 7.034939] Root device found: mmcblk0p1 [ 7.036962] Found dev node: /dev/mmcblk0p1 [ 7.038336] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.071850] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.074435] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.074439] Extcon AUX1(HDMI) disable [ 7.075766] Rootfs mounted over mmcblk0p1 [ 7.097669] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.098306] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.098550] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.102868] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.102874] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.105893] Switching from initrd to actual rootfs [ 7.111222] tegradc 15200000.display: unblank [ 7.112235] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.112415] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.118145] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.120036] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.124002] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.124006] Extcon AUX1(HDMI) enable [ 7.136825] tegradc 15200000.display: sync windows ret = 247 [ 7.175096] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.182153] Extcon HDMI: HPD enabled [ 7.185818] tegradc 15200000.display: hdmi: plugged [ 7.247458] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.248880] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.250354] usb 1-3: Product: Bluetooth Radio [ 7.251672] usb 1-3: Manufacturer: Realtek [ 7.252979] usb 1-3: SerialNumber: 00e04c000001 [ 7.286535] systemd[1]: System time before build time, advancing clock. [ 7.360479] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.365376] systemd[1]: Detected architecture arm64. [ 7.404793] systemd[1]: Set hostname to . [ 7.570672] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.930127] random: systemd: uninitialized urandom read (16 bytes read) [ 7.931914] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.933545] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.939332] systemd[1]: Created slice system-modprobe.slice. [ 7.942938] random: systemd: uninitialized urandom read (16 bytes read) [ 7.945596] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.948946] random: systemd: uninitialized urandom read (16 bytes read) [ 7.951656] systemd[1]: Created slice User and Session Slice. [ 7.955330] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.959600] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.963090] systemd[1]: Reached target User and Group Name Lookups. [ 7.966482] systemd[1]: Reached target Slices. [ 7.969662] systemd[1]: Reached target Swap. [ 7.973849] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.977607] systemd[1]: Listening on Syslog Socket. [ 7.981291] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.984748] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.989014] systemd[1]: Listening on Journal Audit Socket. [ 7.992084] random: crng init done [ 7.993619] random: 7 urandom warning(s) missed due to ratelimiting [ 7.997342] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.002727] systemd[1]: Listening on Journal Socket. [ 8.006623] systemd[1]: Listening on udev Control Socket. [ 8.010222] systemd[1]: Listening on udev Kernel Socket. [ 8.018745] systemd[1]: Mounting Huge Pages File System... [ 8.027625] systemd[1]: Mounting POSIX Message Queue File System... [ 8.035854] systemd[1]: Mounting RPC Pipe File System... [ 8.044457] systemd[1]: Mounting Kernel Debug File System... [ 8.052968] systemd[1]: Mounting Kernel Trace File System... [ 8.063194] systemd[1]: Starting Journal Service... [ 8.072235] systemd[1]: Starting Set the console keyboard layout... [ 8.080611] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.084308] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.090749] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.098528] systemd[1]: Started Nameserver information manager. [ 8.104046] systemd[1]: Reached target Network (Pre). [ 8.110969] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.112952] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.119336] systemd[1]: Starting Load Kernel Modules... [ 8.127189] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.135962] systemd[1]: Starting udev Coldplug all Devices... [ 8.146152] systemd[1]: Mounted Huge Pages File System. [ 8.150238] systemd[1]: Mounted POSIX Message Queue File System. [ 8.154183] systemd[1]: Mounted RPC Pipe File System. [ 8.158874] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.158882] systemd[1]: Mounted Kernel Debug File System. [ 8.164844] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.166720] systemd[1]: Mounted Kernel Trace File System. [ 8.167326] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.169691] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.169704] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.169708] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.169995] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.171377] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.186801] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.186812] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.205983] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.214772] systemd[1]: nvfb-udev.service: Succeeded. [ 8.219661] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.231215] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.244420] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.246879] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.254120] systemd[1]: Starting Load/Save Random Seed... [ 8.262212] systemd[1]: Starting Create System Users... [ 8.289070] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.289070] [ 8.310570] systemd[1]: Finished Load/Save Random Seed. [ 8.317417] systemd[1]: Finished Load Kernel Modules. [ 8.322343] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.329267] systemd[1]: Mounting Kernel Configuration File System... [ 8.337680] systemd[1]: Started OP-TEE Client Supplicant. [ 8.346010] systemd[1]: Starting Apply Kernel Variables... [ 8.356343] systemd[1]: Finished Set the console keyboard layout. [ 8.360726] systemd[1]: Mounted Kernel Configuration File System. [ 8.372023] systemd[1]: Finished Create System Users. [ 8.380470] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.809018] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.815588] imx219 9-0010: board setup failed [ 9.821195] imx219: probe of 9-0010 failed with error -121 [ 9.835126] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.840368] imx219 10-0010: board setup failed [ 9.846158] imx219: probe of 10-0010 failed with error -121 [ 9.868434] hot-surface-alert cooling state: 0 -> 1 [ 10.910089] using random self ethernet address [ 10.911332] using random host ethernet address [ 11.348821] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.350137] Creating 1 MTD partitions on "spi6.0": [ 11.351397] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.226808] using random self ethernet address [ 12.227961] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.909450] nvidia: loading out-of-tree module taints kernel. [ 58.496305] watchdog: watchdog0: watchdog did not stop! [ 58.931182] Trying to unregister non-registered hwtime source [ 61.989110] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.990801] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ?? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 73000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ?歊lk_early initialized 觨/TC:滵ail_early initialized ?N殞use initialized hwwdt initialized 鄤n-s漮194_ec_get_ec_list: found 45 ecs 輑cure exter歋c initialized vmon_setup_monitors: found 3 monitors vmon initialized 鄚al榥dc initialized ?殞mon_populate_monitors: found 73 monitors 覡T found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu A歊lk_dt_late initialized 酳滱oc_late initialized 輍漥m_post initialized dbells initialized ?11歍mce initialized cvc initialized ?03:23:20 UTC榥vfs_clk_mach_post initialized ?202榥vfs_clk_platform_post initialized ? a歊vc_late initialized regulator_post initialized 跾rch漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ?4 I/TC: WARNING漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ? This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.615] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... 觨/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000024] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000796] Console: colour dummy device 80x25 [ 0.002221] printk: console [tty0] enabled [ 0.002284] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002335] pid_max: default: 32768 minimum: 301 [ 0.002519] LSM: Security Framework initializing [ 0.002578] Yama: becoming mindful. [ 0.002629] SELinux: Initializing. [ 0.002791] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002844] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005920] rcu: Hierarchical SRCU implementation. [ 0.006161] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007076] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007141] DTB Build time: Aug 10 2022 20:31:49 [ 0.010090] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010362] Remapping and enabling EFI services. [ 0.012556] smp: Bringing up secondary CPUs ... [ 0.041771] Detected PIPT I-cache on CPU1 [ 0.041847] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073383] Detected PIPT I-cache on CPU2 [ 0.073530] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104895] Detected PIPT I-cache on CPU3 [ 0.105037] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134831] Detected PIPT I-cache on CPU4 [ 0.135053] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164922] Detected PIPT I-cache on CPU5 [ 0.165055] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165478] smp: Brought up 1 node, 6 CPUs [ 0.165803] SMP: Total of 6 processors activated. [ 0.165829] CPU features: detected: Privileged Access Never [ 0.165852] CPU features: detected: LSE atomic instructions [ 0.165875] CPU features: detected: User Access Override [ 0.165899] CPU features: detected: 32-bit EL0 Support [ 0.165922] CPU features: detected: RAS Extension Support [ 0.165945] CPU features: detected: CRC32 instructions [ 0.165969] CPU features: detected: 32-bit EL1 Support [ 0.234790] CPU: All CPU(s) started at EL2 [ 0.240990] devtmpfs: initialized [ 0.286869] Registered cp15_barrier emulation handler [ 0.287021] Registered setend emulation handler [ 0.287052] KASLR enabled [ 0.287300] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287345] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288645] pinctrl core: initialized pinctrl subsystem [ 0.289708] SMBIOS 3.0.0 present. [ 0.289744] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290447] NET: Registered protocol family 16 [ 0.292416] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292935] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293659] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293742] audit: initializing netlink subsys (disabled) [ 0.294072] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.294527] thermal_sys: Registered thermal governor 'step_wise' [ 0.294534] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294562] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296747] cpuidle: using governor menu [ 0.297115] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297581] ASID allocator initialised with 32768 entries [ 0.297824] Serial: AMBA PL011 UART driver [ 0.301058] Tegra reboot handler registered. [ 0.369900] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.370019] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.370229] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.370301] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370482] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370535] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.370667] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.370719] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.370864] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.370916] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.373181] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.373239] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.373278] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.373315] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.373354] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373390] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373426] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373462] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373497] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373535] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373571] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373607] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.373642] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.373678] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.373713] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.373748] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.373795] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.373909] mc-err: mcerr ops are set to t19x [ 0.385375] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.385411] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.385432] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.385451] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.391548] ACPI: Interpreter disabled. [ 0.392695] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.394013] iommu: Default domain type: Translated [ 0.394087] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.394442] SCSI subsystem initialized [ 0.394662] usbcore: registered new interface driver usbfs [ 0.394705] usbcore: registered new interface driver hub [ 0.394737] usbcore: registered new device driver usb [ 0.395178] mc: Linux media interface: v0.10 [ 0.395210] videodev: Linux video capture interface: v2.00 [ 0.395595] pps_core: LinuxPPS API ver. 1 registered [ 0.395609] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.395630] PTP clock support registered [ 0.395864] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.396133] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.396213] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.396889] Registered efivars operations [ 0.402362] FPGA manager framework [ 0.402460] Advanced Linux Sound Architecture Driver Initialized. [ 0.402992] Bluetooth: Core ver 2.22 [ 0.403031] NET: Registered protocol family 31 [ 0.403043] Bluetooth: HCI device and connection manager initialized [ 0.403062] Bluetooth: HCI socket layer initialized [ 0.403076] Bluetooth: L2CAP socket layer initialized [ 0.403097] Bluetooth: SCO socket layer initialized [ 0.405498] camchar: rtcpu character device driver loaded [ 0.406530] clocksource: Switched to clocksource arch_sys_counter [ 0.813166] VFS: Disk quotas dquot_6.6.0 [ 0.813300] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.813709] pnp: PnP ACPI: disabled [ 0.827662] la/ptsa driver initialized. [ 0.827811] NET: Registered protocol family 2 [ 0.828029] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.835717] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.835917] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.836288] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.836912] TCP: Hash tables configured (established 65536 bind 65536) [ 0.837114] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.837258] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.837521] NET: Registered protocol family 1 [ 0.838380] RPC: Registered named UNIX socket transport module. [ 0.838412] RPC: Registered udp transport module. [ 0.838427] RPC: Registered tcp transport module. [ 0.838441] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.838466] PCI: CLS 0 bytes, default 64 [ 0.838861] Trying to unpack rootfs image as initramfs... [ 1.113384] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.116648] Freeing initrd memory: 8196K [ 1.121602] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.121638] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.121669] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.122044] kvm [1]: IPA Size Limit: 40 bits [ 1.122583] kvm [1]: vgic interrupt IRQ9 [ 1.123289] kvm [1]: VHE mode initialized successfully [ 1.124967] Initialise system trusted keyrings [ 1.125290] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.131639] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.132484] NFS: Registering the id_resolver key type [ 1.132528] Key type id_resolver registered [ 1.132544] Key type id_legacy registered [ 1.132622] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.132649] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.132686] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.143120] NET: Registered protocol family 38 [ 1.143177] Key type asymmetric registered [ 1.143193] Asymmetric key parser 'x509' registered [ 1.143249] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.143550] io scheduler mq-deadline registered [ 1.143570] io scheduler kyber registered [ 1.150481] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.153717] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.153821] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.153921] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.154017] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.154089] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.160354] scrncapt: init (heads:4 wins:6 planes:4) [ 1.160502] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.161603] EINJ: ACPI disabled. [ 1.165090] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.165118] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.165134] tegra-pmc: ### PMC reset level: L1 [ 1.165148] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.165212] tegra-pmc: PMC Prod config success [ 1.171383] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.210812] random: fast init done [ 1.211414] printk: console [ttyTCU0] enabled [ 2.729673] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.733606] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.738276] arm-smmu 10000000.iommu: stage 1 translation [ 2.744003] arm-smmu 10000000.iommu: stage 2 translation [ 2.749430] arm-smmu 10000000.iommu: nested translation [ 2.754811] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.761955] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.773381] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.775086] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.781371] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.789240] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.794683] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.799134] arm-smmu 12000000.iommu: stage 1 translation [ 2.804900] arm-smmu 12000000.iommu: stage 2 translation [ 2.810069] arm-smmu 12000000.iommu: nested translation [ 2.815759] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.822942] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.833882] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.835798] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.842356] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.850085] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.859666] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.863065] tegra_profiler: auth: init [ 2.867365] THERMAL EST: found 3 subdevs [ 2.870718] THERMAL EST num_resources: 0 [ 2.874559] [THERMAL EST subdev 0] [ 2.877597] [THERMAL EST subdev 1] [ 2.881291] [THERMAL EST subdev 2] [ 2.884284] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.890993] THERMAL EST: thz register success. [ 2.894978] THERMAL EST: end of probe, return err: 0 [ 2.900229] nvsciipc: loaded module [ 2.907851] tun: Universal TUN/TAP device driver, 1.6 [ 2.910240] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.916128] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.921976] e1000e: Intel(R) PRO/1000 Network Driver [ 2.926624] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.932900] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.938163] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.944464] PPP generic driver version 2.4.2 [ 2.948391] PPP BSD Compression module registered [ 2.953165] PPP Deflate Compression module registered [ 2.958130] PPP MPPE Compression module registered [ 2.963167] usbcore: registered new interface driver r8152 [ 2.968908] usbcore: registered new interface driver asix [ 2.974011] usbcore: registered new interface driver ax88179_178a [ 2.980125] usbcore: registered new interface driver cdc_ether [ 2.986316] usbcore: registered new interface driver net1080 [ 2.991661] usbcore: registered new interface driver cdc_subset [ 2.997955] usbcore: registered new interface driver zaurus [ 3.003656] usbcore: registered new interface driver cdc_ncm [ 3.009094] usbcore: registered new interface driver aqc111 [ 3.014841] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.020822] ohci-pci: OHCI PCI platform driver [ 3.025346] ohci-platform: OHCI generic platform driver [ 3.031352] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.037451] usbcore: registered new interface driver uas [ 3.041412] usbcore: registered new interface driver usb-storage [ 3.047793] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.053566] mousedev: PS/2 mouse device common for all mice [ 3.058798] usbcore: registered new interface driver xpad [ 3.066713] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.069512] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.077354] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.083869] i2c /dev entries driver [ 3.087252] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.093110] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.098639] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.103781] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.109105] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.114340] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.120063] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.134585] device-mapper: uevent: version 1.0.3 [ 3.135185] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.140719] cpuidle: Initializing cpuidle driver [ 3.144657] sdhci: Secure Digital Host Controller Interface driver [ 3.149145] sdhci: Copyright(c) Pierre Ossman [ 3.152978] Synopsys Designware Multimedia Card Interface Driver [ 3.159429] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.165391] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.165969] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.178339] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.197876] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.207077] vdd-1v0: supplied by regulator-dummy [ 3.212518] vdd-1v8-hs: supplied by regulator-dummy [ 3.217233] vdd-1v8-ls: supplied by regulator-dummy [ 3.222011] vdd-1v8-ao: supplied by regulator-dummy [ 3.225909] vddio-ddr-1v1: supplied by regulator-dummy [ 3.230348] vdd-rtc: supplied by regulator-dummy [ 3.232172] spmic-ldo1: supplied by regulator-dummy [ 3.233388] vdd-ao-3v3: supplied by regulator-dummy [ 3.239534] vddio-emmc-3v3: supplied by regulator-dummy [ 3.245734] spmic-ldo4: supplied by regulator-dummy [ 3.246930] vdd-usb-3v3: supplied by regulator-dummy [ 3.253003] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.259099] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.264639] spmic-ldo8: supplied by vdd-1v8-ls [ 3.266023] gpio-510 (gpio_default): hogged as output/high [ 3.267395] gpio-511 (gpio_default): hogged as output/high [ 3.272210] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.410754] max77686-rtc max77620-rtc: registered as rtc0 [ 3.411733] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.412041] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 4.156865] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.157957] hid: raw HID events driver (C) Jiri Kosina [ 4.158733] usbcore: registered new interface driver usbhid [ 4.158888] usbhid: USB HID core driver [ 4.160640] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.161743] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 27.125355] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.200739] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.195 ms) 墁 4.246840] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.247393] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.248681] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.249560] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.251275] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.251907] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.252617] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.253918] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.254319] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.256672] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.263193] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.269165] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.274183] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.281118] denver_knobs_init:MTS_VERSION:55637613 [ 4.294135] t19x_cache tegra-cache: probed [ 4.297129] optee: probing for conduit method. [ 4.298023] optee: revision 3.16 (65cc2218) [ 4.299302] optee: dynamic shared memory is enabled [ 4.301947] optee: initialized driver [ 4.307920] nvpmodel: initialized successfully [ 4.309201] tegra_hv: get_hvd: not initialized yet [ 4.314029] user_ivc_mempool: hypervisor not present [ 4.320354] usbcore: registered new interface driver snd-usb-audio [ 4.326596] u32 classifier [ 4.327979] input device check on [ 4.331917] Actions configured [ 4.335356] Initializing XFRM netlink socket [ 4.340292] NET: Registered protocol family 10 [ 4.347492] Segment Routing with IPv6 [ 4.347869] NET: Registered protocol family 17 [ 4.351860] NET: Registered protocol family 15 [ 4.356038] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.369408] Bluetooth: RFCOMM socket layer initialized [ 4.374332] Bluetooth: RFCOMM ver 1.11 [ 4.378427] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.384059] Bluetooth: HIDP socket layer initialized [ 4.390182] 9pnet: Installing 9P2000 support [ 4.393474] Key type dns_resolver registered [ 4.399337] registered taskstats version 1 [ 4.402116] Loading compiled-in X.509 certificates [ 4.415627] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.417872] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.428135] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.429797] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.438693] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.447042] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.562762] tegra194-pcie 14160000.pcie: Link up [ 4.565672] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.565911] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.566060] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.566332] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.566665] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.567089] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.567613] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.579772] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.580240] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.580681] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.582263] pci 0004:01:00.0: supports D1 D2 [ 4.582456] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.593766] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.594232] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.594430] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.594983] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.595340] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.595527] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.597279] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.604747] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.613490] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.623960] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.628794] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.634257] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.641322] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.650466] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.651219] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.659895] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.668101] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.783525] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.784059] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.784332] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.784489] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.784808] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.785044] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.785433] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.785987] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.807562] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.807851] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.809830] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.811807] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.813557] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.815680] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.816822] pci 0005:00:00.0: Removing from iommu group 7 [ 5.817106] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.853926] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.880650] host1x 13e10000.host1x: initialized [ 5.882756] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.883612] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.884863] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.885550] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.886995] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.887668] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.888677] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.889314] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.890301] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.891094] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.893511] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.900645] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.910618] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.917732] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.927807] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.934354] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.944590] falcon 15340000.vic: Adding to iommu group 17 [ 5.960259] falcon 15340000.vic: initialized [ 5.961511] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.966874] falcon 15380000.nvjpg: initialized [ 5.967450] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.977854] falcon 154c0000.nvenc: initialized [ 5.978659] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.987819] falcon 15a80000.nvenc1: initialized [ 5.988436] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.002022] nvdec 15480000.nvdec: initialized [ 6.002731] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.013409] nvdec 15140000.nvdec1: initialized [ 6.014065] tsec 15500000.tsec: Adding to iommu group 18 [ 6.020339] tsec 15500000.tsec: initialized [ 6.021057] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.026402] tsec 15100000.tsecb: initialized [ 6.030710] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.056325] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.069551] gpio-374 (wifi-enable): hogged as output/high [ 6.069898] gpio-431 (camera-control-output-low): hogged as output/low [ 6.070278] gpio-432 (camera-control-output-low): hogged as output/low [ 6.072214] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.075086] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.075725] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.077126] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.081398] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.087241] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.092660] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.101703] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.108317] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.119957] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.125126] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.130614] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.139451] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.148971] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.155990] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.163813] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.170181] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.179856] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.185825] pva 16000000.pva0: Adding to iommu group 22 [ 6.214402] pva 16000000.pva0: initialized [ 6.219869] pva 16800000.pva1: Adding to iommu group 23 [ 6.231712] pva 16800000.pva1: initialized [ 6.236985] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.252225] nvdla 15880000.nvdla0: initialized [ 6.253692] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.263522] nvdla 158c0000.nvdla1: initialized [ 6.267190] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.267571] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.267775] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.267815] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.268431] tegradc 15200000.display: Adding to iommu group 26 [ 6.268495] tegradccommon 15200000.display-hub: dma mapping done [ 6.268814] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.270815] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.275543] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.277624] tegradc 15210000.display: Adding to iommu group 26 [ 6.278169] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.278336] generic_infoframe_type: 0x87 [ 6.278499] tegradc 15200000.display: DT parsed successfully [ 6.278864] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.281090] tegra_cec 3960000.tegra_cec: probed [ 6.282193] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.283126] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.283139] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.283144] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.284150] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.284165] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.285583] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.289066] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.299743] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.304512] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.311652] kfuse 3830000.kfuse: initialized [ 6.318453] tegradc 15210000.display: disp0 connected to head1->sor [ 6.322820] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.330362] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.337905] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.339170] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.346479] tegradc 15210000.display: DT parsed successfully [ 6.352956] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.358031] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.451607] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.455794] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.464932] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.470653] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.492147] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.492610] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.493314] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.502035] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.510533] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.517237] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.524686] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.531912] usb usb1: Product: xHCI Host Controller [ 6.536617] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.542883] usb usb1: SerialNumber: 3610000.xhci [ 6.548735] hub 1-0:1.0: USB hub found [ 6.551503] hub 1-0:1.0: 4 ports detected [ 6.556420] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.561112] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.568714] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.576584] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.584080] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.591326] usb usb2: Product: xHCI Host Controller [ 6.596254] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.602639] usb usb2: SerialNumber: 3610000.xhci [ 6.608468] hub 2-0:1.0: USB hub found [ 6.610983] hub 2-0:1.0: 4 ports detected [ 6.661771] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.668674] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.670051] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.670323] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.683913] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.685030] tegra194-cpufreq ccplex: probed with BWMGR [ 6.686404] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.686939] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.687401] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.688860] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.695686] tegra194-vi5 15c10000.vi: initialized [ 6.697077] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.697331] generic_infoframe_type: 0x87 [ 6.697508] tegradc 15200000.display: DT parsed successfully [ 6.698460] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.700808] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.701391] mmc0: CQHCI version 5.10 [ 6.707540] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.716673] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.718872] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.726784] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.726795] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.730205] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.735192] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.741914] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.749999] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.757688] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.765809] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.774614] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.778908] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.784987] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.792137] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.797461] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.804158] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.843828] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.851697] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.853561] tegradc 15200000.display: probed [ 6.862599] nvethernet 2490000.ethernet: Macsec not supported [ 6.868561] mmc0: Command Queue Engine enabled [ 6.872446] mmc0: periodic cache flush enabled [ 6.877126] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.884175] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.891898] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.896684] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.900002] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.909480] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.914902] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.916417] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.931388] Console: switching to colour frame buffer device 240x67 [ 6.932453] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.937369] tegradc 15200000.display: fb registered [ 6.945304] tegra-se-nvhost 15810000.se: initialized [ 6.948405] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.958093] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.965665] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.965904] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.971430] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.978277] tegra-se-nvhost 15820000.se: initialized [ 6.990357] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.995276] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.001668] tegra-se-nvhost 15830000.se: initialized [ 7.007107] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.012369] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.019419] tegra-se-nvhost 15840000.se: initialized [ 7.022214] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.024837] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.031407] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.039380] tegra_actmon d230000.actmon: in actmon_register()... [ 7.039724] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.044950] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.064463] usb 1-2: Manufacturer: Generic [ 7.068384] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.068656] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.076360] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.089986] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.090170] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.096572] Extcon AUX1(HDMI) enable [ 7.105247] hvc_sysfs: hypervisor is not present [ 7.108076] hub 1-2:1.0: USB hub found [ 7.113468] tegradc 15210000.display: disp1 connected to head1->sor [ 7.117650] hub 1-2:1.0: 4 ports detected [ 7.123237] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.134336] tegradc 15210000.display: DT parsed successfully [ 7.139826] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.147411] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.154274] ALSA device list: [ 7.154658] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.154665] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.155216] random: crng init done [ 7.161780] tegradc 15210000.display: probed [ 7.164993] No soundcards found. [ 7.182297] tegradc 15210000.display: fb registered [ 7.190239] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.192198] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.192732] Freeing unused kernel memory: 3968K [ 7.194047] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.202474] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.207342] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.215031] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.215042] usb 2-3: Manufacturer: Generic [ 7.236511] tegradc 15210000.display: blank - powerdown [ 7.241468] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.242836] Run /init as init process [ 7.247389] hub 2-3:1.0: USB hub found [ 7.249187] hub 2-3:1.0: 4 ports detected [ 7.249968] Extcon DP: HPD disabled [ 7.264888] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.273568] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.278676] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) 榳ARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk 墁 7.297082] tegradc 15200000.display: blank - powerdown [ 7.306589] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.310643] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.314826] Root device found: mmcblk0p1 [ 7.316861] Found dev node: /dev/mmcblk0p1 [ 7.340205] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.340212] Extcon AUX1(HDMI) disable [ 7.351682] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.355675] Rootfs mounted over mmcblk0p1 [ 7.363708] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.364606] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.371141] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.371147] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.377024] tegradc 15200000.display: unblank [ 7.378116] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.378342] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.384263] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.386168] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.386416] Switching from initrd to actual rootfs [ 7.390230] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.390235] Extcon AUX1(HDMI) enable [ 7.402937] tegradc 15200000.display: sync windows ret = 246 [ 7.441564] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.448882] Extcon HDMI: HPD enabled [ 7.452557] tegradc 15200000.display: hdmi: plugged [ 7.459792] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.465886] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.473331] usb 1-3: Product: Bluetooth Radio [ 7.477718] usb 1-3: Manufacturer: Realtek [ 7.481546] usb 1-3: SerialNumber: 00e04c000001 [ 7.551228] systemd[1]: System time before build time, advancing clock. [ 7.619885] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.625029] systemd[1]: Detected architecture arm64. [ 7.681736] systemd[1]: Set hostname to . [ 7.846686] systemd-sysv-generator[242]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.195697] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.197496] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.203110] systemd[1]: Created slice system-modprobe.slice. [ 8.207915] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.212143] systemd[1]: Created slice User and Session Slice. [ 8.215680] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.219979] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.223384] systemd[1]: Reached target User and Group Name Lookups. [ 8.226885] systemd[1]: Reached target Slices. [ 8.230258] systemd[1]: Reached target Swap. [ 8.234409] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.238213] systemd[1]: Listening on Syslog Socket. [ 8.241849] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.245403] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.249787] systemd[1]: Listening on Journal Audit Socket. [ 8.253577] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.257425] systemd[1]: Listening on Journal Socket. [ 8.261236] systemd[1]: Listening on udev Control Socket. [ 8.264856] systemd[1]: Listening on udev Kernel Socket. [ 8.273100] systemd[1]: Mounting Huge Pages File System... [ 8.282216] systemd[1]: Mounting POSIX Message Queue File System... [ 8.291763] systemd[1]: Mounting RPC Pipe File System... [ 8.300381] systemd[1]: Mounting Kernel Debug File System... [ 8.309068] systemd[1]: Mounting Kernel Trace File System... [ 8.320036] systemd[1]: Starting Journal Service... [ 8.329470] systemd[1]: Starting Set the console keyboard layout... [ 8.337839] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.341763] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.348470] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.357441] systemd[1]: Started Nameserver information manager. [ 8.361630] systemd[1]: Reached target Network (Pre). [ 8.368383] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.370440] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.378592] systemd[1]: Starting Load Kernel Modules... [ 8.386766] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.395478] systemd[1]: Starting udev Coldplug all Devices... [ 8.405522] systemd[1]: Mounted Huge Pages File System. [ 8.409459] systemd[1]: Mounted POSIX Message Queue File System. [ 8.413194] systemd[1]: Mounted RPC Pipe File System. [ 8.416823] systemd[1]: Mounted Kernel Debug File System. [ 8.418508] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.424164] systemd[1]: Mounted Kernel Trace File System. [ 8.428443] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.430632] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.430679] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.433611] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.433624] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.433630] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.433871] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.435328] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.441435] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.441449] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.448487] systemd[1]: nvfb-udev.service: Succeeded. [ 8.454793] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.467364] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.472567] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.474237] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.489977] systemd[1]: Starting Load/Save Random Seed... [ 8.498063] systemd[1]: Starting Create System Users... [ 8.532222] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.532222] [ 8.548878] systemd[1]: Finished Load/Save Random Seed. [ 8.560630] systemd[1]: Finished Create System Users. [ 8.569022] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.582260] systemd[1]: Finished Load Kernel Modules. [ 8.587505] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.594007] systemd[1]: Mounting Kernel Configuration File System... [ 8.601827] systemd[1]: Started OP-TEE Client Supplicant. [ 8.610390] systemd[1]: Starting Apply Kernel Variables... [ 8.621153] systemd[1]: Finished Set the console keyboard layout. [ 8.630429] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.634844] systemd[1]: Mounted Kernel Configuration File System. [ 8.638674] systemd[1]: Reached target Local File Systems (Pre). [ 8.641857] systemd[1]: Reached target Local File Systems. [ 8.645584] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 10.055504] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.061886] imx219 9-0010: board setup failed [ 10.063309] imx219: probe of 9-0010 failed with error -121 [ 10.075427] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.081859] imx219 10-0010: board setup failed [ 10.083169] imx219: probe of 10-0010 failed with error -121 [ 10.108475] hot-surface-alert cooling state: 0 -> 1 [ 11.079526] using random self ethernet address [ 11.081127] using random host ethernet address [ 11.813823] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.815599] Creating 1 MTD partitions on "spi6.0": [ 11.817219] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.486172] using random self ethernet address [ 12.487825] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.982294] nvidia: loading out-of-tree module taints kernel. [ 58.200487] watchdog: watchdog0: watchdog did not stop! [ 58.684118] Trying to unregister non-registered hwtime source [ 61.746060] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.747718] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 73500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.310] I> sdmmc DDR50 mode [0001.328] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.345] W> Cannot find any partition table for 00000003 [0001.346] > PARTITION_MANAGER: Failed to publish partition. [0001.362] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.363] I> Active Boot chain : 0 [0002.034] I> Relocating BR-BCT [0002.036] > DEVICE_PROD: device prod is not initialized. [0002.341] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.342] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.343] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.344] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.344] I> dram_block larger than 80000000 [0002.346] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.358] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.361] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨/歊lk_early initialized 賏C: N滵ail_early initialized 鄤殞use initialized hwwdt initialized 鄚-sec漮194_ec_get_ec_list: found 45 ecs 酳re extern歋c initialized 跾潎mon_setup_monitors: found 3 monitors vmon initialized 鄟 D榥dc initialized fmon_populate_monitors: found 73 monitors 賏 found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 歊lk_dt_late initialized ?滱oc_late initialized pm_post initialized dbells initialized ? 03歍mce initialized cvc initialized ?23:20 UTC 2榥vfs_clk_mach_post initialized ?22 a榥vfs_clk_platform_post initialized 跾r歊vc_late initialized regulator_post initialized 踄h64 漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ?I/TC: WARNING漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ? This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.566] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.649] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... 觨/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000745] Console: colour dummy device 80x25 [ 0.002232] printk: console [tty0] enabled [ 0.002304] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002360] pid_max: default: 32768 minimum: 301 [ 0.002598] LSM: Security Framework initializing [ 0.002673] Yama: becoming mindful. [ 0.002735] SELinux: Initializing. [ 0.002906] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002953] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006006] rcu: Hierarchical SRCU implementation. [ 0.006297] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006964] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007002] DTB Build time: Aug 10 2022 20:31:49 [ 0.009582] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009822] Remapping and enabling EFI services. [ 0.011979] smp: Bringing up secondary CPUs ... [ 0.044927] Detected PIPT I-cache on CPU1 [ 0.045004] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.078202] Detected PIPT I-cache on CPU2 [ 0.078357] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.107991] Detected PIPT I-cache on CPU3 [ 0.108134] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.137901] Detected PIPT I-cache on CPU4 [ 0.138075] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.167868] Detected PIPT I-cache on CPU5 [ 0.168081] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.168471] smp: Brought up 1 node, 6 CPUs [ 0.168781] SMP: Total of 6 processors activated. [ 0.168841] CPU features: detected: Privileged Access Never [ 0.168864] CPU features: detected: LSE atomic instructions [ 0.168878] CPU features: detected: User Access Override [ 0.168892] CPU features: detected: 32-bit EL0 Support [ 0.168905] CPU features: detected: RAS Extension Support [ 0.168918] CPU features: detected: CRC32 instructions [ 0.168932] CPU features: detected: 32-bit EL1 Support [ 0.235091] CPU: All CPU(s) started at EL2 [ 0.241285] devtmpfs: initialized [ 0.296935] Registered cp15_barrier emulation handler [ 0.297061] Registered setend emulation handler [ 0.297085] KASLR enabled [ 0.297420] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.297445] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.298832] pinctrl core: initialized pinctrl subsystem [ 0.299799] SMBIOS 3.0.0 present. [ 0.299828] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.300450] NET: Registered protocol family 16 [ 0.302559] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.303075] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.303789] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.303841] audit: initializing netlink subsys (disabled) [ 0.304151] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.304675] thermal_sys: Registered thermal governor 'step_wise' [ 0.304683] thermal_sys: Registered thermal governor 'power_allocator' [ 0.304703] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.306977] cpuidle: using governor menu [ 0.307490] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.307869] ASID allocator initialised with 32768 entries [ 0.308105] Serial: AMBA PL011 UART driver [ 0.311393] Tegra reboot handler registered. [ 0.383610] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.383772] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383968] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.384019] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.384151] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.384197] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.384336] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.384384] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.384550] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.384612] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.386945] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.386997] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.387026] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.387068] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.387098] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.387126] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.387162] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.387192] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.387217] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.387242] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.387267] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.387302] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.387327] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.387357] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.387382] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.387407] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.387432] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.387526] mc-err: mcerr ops are set to t19x [ 0.400992] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.401016] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.401028] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.401041] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.407568] ACPI: Interpreter disabled. [ 0.408827] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.410213] iommu: Default domain type: Translated [ 0.410281] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.410708] SCSI subsystem initialized [ 0.410942] usbcore: registered new interface driver usbfs [ 0.410988] usbcore: registered new interface driver hub [ 0.411024] usbcore: registered new device driver usb [ 0.411427] mc: Linux media interface: v0.10 [ 0.411460] videodev: Linux video capture interface: v2.00 [ 0.411720] pps_core: LinuxPPS API ver. 1 registered [ 0.411732] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.411757] PTP clock support registered [ 0.411931] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.412241] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.412351] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.412904] Registered efivars operations [ 0.418501] FPGA manager framework [ 0.418611] Advanced Linux Sound Architecture Driver Initialized. [ 0.419362] Bluetooth: Core ver 2.22 [ 0.419402] NET: Registered protocol family 31 [ 0.419414] Bluetooth: HCI device and connection manager initialized [ 0.419430] Bluetooth: HCI socket layer initialized [ 0.419467] Bluetooth: L2CAP socket layer initialized [ 0.419489] Bluetooth: SCO socket layer initialized [ 0.421741] camchar: rtcpu character device driver loaded [ 0.422855] clocksource: Switched to clocksource arch_sys_counter [ 0.821670] VFS: Disk quotas dquot_6.6.0 [ 0.821763] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.822276] pnp: PnP ACPI: disabled [ 0.835670] la/ptsa driver initialized. [ 0.835817] NET: Registered protocol family 2 [ 0.836077] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.844447] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.844602] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.844989] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.845630] TCP: Hash tables configured (established 65536 bind 65536) [ 0.845781] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.845916] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.846210] NET: Registered protocol family 1 [ 0.847182] RPC: Registered named UNIX socket transport module. [ 0.847204] RPC: Registered udp transport module. [ 0.847213] RPC: Registered tcp transport module. [ 0.847223] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.847239] PCI: CLS 0 bytes, default 64 [ 0.847421] Trying to unpack rootfs image as initramfs... [ 1.033733] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.036049] Freeing initrd memory: 8196K [ 1.039216] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.039243] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.039270] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.039497] kvm [1]: IPA Size Limit: 40 bits [ 1.039899] kvm [1]: vgic interrupt IRQ9 [ 1.040330] kvm [1]: VHE mode initialized successfully [ 1.041497] Initialise system trusted keyrings [ 1.041821] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.046210] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.046942] NFS: Registering the id_resolver key type [ 1.046973] Key type id_resolver registered [ 1.046983] Key type id_legacy registered [ 1.047044] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.047060] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.047092] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.054005] NET: Registered protocol family 38 [ 1.054026] Key type asymmetric registered [ 1.054036] Asymmetric key parser 'x509' registered [ 1.054078] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.054296] io scheduler mq-deadline registered [ 1.054309] io scheduler kyber registered [ 1.058291] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.060378] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.060453] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.060504] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.060573] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.060641] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.064512] scrncapt: init (heads:4 wins:6 planes:4) [ 1.064570] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.065352] EINJ: ACPI disabled. [ 1.067686] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.067705] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.067715] tegra-pmc: ### PMC reset level: L1 [ 1.067724] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.067780] tegra-pmc: PMC Prod config success [ 1.072724] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.556015] random: fast init done [ 2.623494] printk: console [ttyTCU0] enabled [ 2.629055] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.634145] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.638444] arm-smmu 10000000.iommu: stage 1 translation [ 2.644213] arm-smmu 10000000.iommu: stage 2 translation [ 2.649710] arm-smmu 10000000.iommu: nested translation [ 2.655051] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.662226] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.671272] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.675353] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.681909] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.689072] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.694694] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.699695] arm-smmu 12000000.iommu: stage 1 translation [ 2.704928] arm-smmu 12000000.iommu: stage 2 translation [ 2.710629] arm-smmu 12000000.iommu: nested translation [ 2.716053] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.722956] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.732247] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.736343] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.742641] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.750145] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.759931] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.763283] tegra_profiler: auth: init [ 2.767441] THERMAL EST: found 3 subdevs [ 2.770722] THERMAL EST num_resources: 0 [ 2.774588] [THERMAL EST subdev 0] [ 2.777904] [THERMAL EST subdev 1] [ 2.781314] [THERMAL EST subdev 2] [ 2.784838] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.791223] THERMAL EST: thz register success. [ 2.795511] THERMAL EST: end of probe, return err: 0 [ 2.800682] nvsciipc: loaded module [ 2.807091] tun: Universal TUN/TAP device driver, 1.6 [ 2.810100] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.816328] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.821880] e1000e: Intel(R) PRO/1000 Network Driver [ 2.827072] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.833133] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.838445] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.844542] PPP generic driver version 2.4.2 [ 2.848846] PPP BSD Compression module registered [ 2.853222] PPP Deflate Compression module registered [ 2.858674] PPP MPPE Compression module registered [ 2.863683] usbcore: registered new interface driver r8152 [ 2.868961] usbcore: registered new interface driver asix [ 2.874519] usbcore: registered new interface driver ax88179_178a [ 2.880389] usbcore: registered new interface driver cdc_ether [ 2.886332] usbcore: registered new interface driver net1080 [ 2.891941] usbcore: registered new interface driver cdc_subset [ 2.898231] usbcore: registered new interface driver zaurus [ 2.903924] usbcore: registered new interface driver cdc_ncm [ 2.909608] usbcore: registered new interface driver aqc111 [ 2.914990] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.921328] ohci-pci: OHCI PCI platform driver [ 2.925381] ohci-platform: OHCI generic platform driver [ 2.931084] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.937569] usbcore: registered new interface driver uas [ 2.941946] usbcore: registered new interface driver usb-storage [ 2.948005] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.953661] mousedev: PS/2 mouse device common for all mice [ 2.959076] usbcore: registered new interface driver xpad [ 2.966876] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.969794] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.977363] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.984080] i2c /dev entries driver [ 2.987440] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.992932] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.998318] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.003691] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.008981] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.014556] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.020182] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.031941] device-mapper: uevent: version 1.0.3 [ 3.032308] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.040247] cpuidle: Initializing cpuidle driver [ 3.044177] sdhci: Secure Digital Host Controller Interface driver [ 3.049170] sdhci: Copyright(c) Pierre Ossman [ 3.053541] Synopsys Designware Multimedia Card Interface Driver [ 3.059449] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.065340] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.065967] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.078719] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.097093] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.105873] vdd-1v0: supplied by regulator-dummy [ 3.111225] vdd-1v8-hs: supplied by regulator-dummy [ 3.115950] vdd-1v8-ls: supplied by regulator-dummy [ 3.120628] vdd-1v8-ao: supplied by regulator-dummy [ 3.124429] vddio-ddr-1v1: supplied by regulator-dummy [ 3.128712] vdd-rtc: supplied by regulator-dummy [ 3.130269] spmic-ldo1: supplied by regulator-dummy [ 3.131446] vdd-ao-3v3: supplied by regulator-dummy [ 3.137474] vddio-emmc-3v3: supplied by regulator-dummy [ 3.143551] spmic-ldo4: supplied by regulator-dummy [ 3.144678] vdd-usb-3v3: supplied by regulator-dummy [ 3.150782] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.156845] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.162233] spmic-ldo8: supplied by vdd-1v8-ls [ 3.163628] gpio-510 (gpio_default): hogged as output/high [ 3.165423] gpio-511 (gpio_default): hogged as output/high [ 3.172315] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.311307] max77686-rtc max77620-rtc: registered as rtc0 [ 3.312590] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.312885] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 4.009284] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.010312] hid: raw HID events driver (C) Jiri Kosina [ 4.010987] usbcore: registered new interface driver usbhid [ 4.011130] usbhid: USB HID core driver [ 4.012862] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.013978] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 26.844890] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.920396] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.316 ms) 墁 4.099161] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.099695] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.100608] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.101369] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.103095] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.103747] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.104315] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.105480] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.105773] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.107755] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.115340] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.121546] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.126573] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.133164] denver_knobs_init:MTS_VERSION:55637613 [ 4.145327] t19x_cache tegra-cache: probed [ 4.149995] optee: probing for conduit method. [ 4.150955] optee: revision 3.16 (65cc2218) [ 4.151974] optee: dynamic shared memory is enabled [ 4.154066] optee: initialized driver [ 4.161640] nvpmodel: initialized successfully [ 4.162205] tegra_hv: get_hvd: not initialized yet [ 4.166423] user_ivc_mempool: hypervisor not present [ 4.172587] usbcore: registered new interface driver snd-usb-audio [ 4.178759] u32 classifier [ 4.180113] input device check on [ 4.183783] Actions configured [ 4.187700] Initializing XFRM netlink socket [ 4.192611] NET: Registered protocol family 10 [ 4.198588] Segment Routing with IPv6 [ 4.199698] NET: Registered protocol family 17 [ 4.204200] NET: Registered protocol family 15 [ 4.208384] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.222137] Bluetooth: RFCOMM socket layer initialized [ 4.226898] Bluetooth: RFCOMM ver 1.11 [ 4.230497] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.236640] Bluetooth: HIDP socket layer initialized [ 4.241992] 9pnet: Installing 9P2000 support [ 4.246060] Key type dns_resolver registered [ 4.251284] registered taskstats version 1 [ 4.254494] Loading compiled-in X.509 certificates [ 4.268216] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.270088] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.280517] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.282196] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.291024] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.299132] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.414914] tegra194-pcie 14160000.pcie: Link up [ 4.417983] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.418211] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.418376] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.418650] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.418888] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.419280] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.419772] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.432412] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.432967] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.433424] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.435138] pci 0004:01:00.0: supports D1 D2 [ 4.435314] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.446177] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.446488] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.446780] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.447306] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.447643] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.447846] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.449470] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.456929] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.465752] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.475747] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.480425] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.485954] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.492852] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.502231] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.503644] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.511819] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.520577] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.635387] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.636070] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.636296] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.636444] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.636733] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.636913] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.637325] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.637731] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.652327] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.652604] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.654016] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.655285] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.656811] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.657967] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.658896] pci 0005:00:00.0: Removing from iommu group 7 [ 5.659184] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.688584] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.708426] host1x 13e10000.host1x: initialized [ 5.709895] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.710688] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.711944] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.712644] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.713577] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.714183] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.715229] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.718704] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.729023] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.735831] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.746224] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.752481] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.762771] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.769974] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.779767] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.786578] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.796235] falcon 15340000.vic: Adding to iommu group 17 [ 5.810753] falcon 15340000.vic: initialized [ 5.811828] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.817864] falcon 15380000.nvjpg: initialized [ 5.818476] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.829749] falcon 154c0000.nvenc: initialized [ 5.830600] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.839016] falcon 15a80000.nvenc1: initialized [ 5.839688] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.851576] nvdec 15480000.nvdec: initialized [ 5.852182] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.860977] nvdec 15140000.nvdec1: initialized [ 5.861576] tsec 15500000.tsec: Adding to iommu group 18 [ 5.867634] tsec 15500000.tsec: initialized [ 5.868163] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.876329] tsec 15100000.tsecb: initialized [ 5.879997] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.909662] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.922065] gpio-374 (wifi-enable): hogged as output/high [ 5.922433] gpio-431 (camera-control-output-low): hogged as output/low [ 5.922709] gpio-432 (camera-control-output-low): hogged as output/low [ 5.924613] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.926311] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.926924] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.928278] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.932930] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.938768] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.944228] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.952569] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.960214] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.971665] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.976591] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.982686] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.991314] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.000473] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.008127] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.015718] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.021700] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.031565] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.037517] pva 16000000.pva0: Adding to iommu group 22 [ 6.063977] pva 16000000.pva0: initialized [ 6.068877] pva 16800000.pva1: Adding to iommu group 23 [ 6.080107] pva 16800000.pva1: initialized [ 6.084711] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.097440] nvdla 15880000.nvdla0: initialized [ 6.098894] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.106659] nvdla 158c0000.nvdla1: initialized [ 6.109068] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.109307] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.109587] tegradc 15200000.display: Adding to iommu group 26 [ 6.109675] tegradccommon 15200000.display-hub: dma mapping done [ 6.117008] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.117389] generic_infoframe_type: 0x87 [ 6.117596] tegradc 15200000.display: DT parsed successfully [ 6.118229] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.127200] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.128480] tegradc 15210000.display: Adding to iommu group 26 [ 6.133770] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.146404] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.151577] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.151631] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.159324] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.159359] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.165395] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.187314] tegra_cec 3960000.tegra_cec: probed [ 6.187646] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.192705] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.197804] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.210043] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.211715] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.227878] kfuse 3830000.kfuse: initialized [ 6.232537] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.232701] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.245869] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.246159] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.252688] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.260617] tegradc 15210000.display: disp0 connected to head1->sor [ 6.265711] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.271348] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.281403] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.287302] tegradc 15210000.display: DT parsed successfully [ 6.293746] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.298938] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.316628] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.321835] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.341767] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.342159] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.345496] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.353753] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.362293] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.368909] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.376549] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.383778] usb usb1: Product: xHCI Host Controller [ 6.388712] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.394749] usb usb1: SerialNumber: 3610000.xhci [ 6.400495] hub 1-0:1.0: USB hub found [ 6.403620] hub 1-0:1.0: 4 ports detected [ 6.407880] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.412715] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.420571] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.428218] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.435916] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.443221] usb usb2: Product: xHCI Host Controller [ 6.448120] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.454360] usb usb2: SerialNumber: 3610000.xhci [ 6.459779] hub 2-0:1.0: USB hub found [ 6.462841] hub 2-0:1.0: 4 ports detected [ 6.501682] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.507560] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.508900] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.509081] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.522784] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.523878] tegra194-cpufreq ccplex: probed with BWMGR [ 6.525233] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.525970] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.526436] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.527849] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.538024] mmc0: CQHCI version 5.10 [ 6.539440] tegra194-vi5 15c10000.vi: initialized [ 6.541769] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.543035] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.546921] generic_infoframe_type: 0x87 [ 6.553357] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.557111] tegradc 15200000.display: DT parsed successfully [ 6.565257] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.570492] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.577033] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.586520] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.591868] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.591874] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.599722] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.600015] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.600022] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.614863] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.621176] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.628972] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.628980] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.637105] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.644749] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.649723] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.664591] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.674828] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.677179] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.679315] tegradc 15200000.display: probed [ 6.687231] mmc0: Command Queue Engine enabled [ 6.687236] mmc0: periodic cache flush enabled [ 6.687248] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.687710] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.687842] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.687859] nvethernet 2490000.ethernet: Macsec not supported [ 6.689181] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.691669] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.763640] Console: switching to colour frame buffer device 240x67 [ 6.764688] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.769517] tegradc 15200000.display: fb registered [ 6.775146] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.787136] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.787222] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.793949] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.800946] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.805880] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.813755] tegra-se-nvhost 15810000.se: initialized [ 6.824581] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.829655] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.835901] tegra-se-nvhost 15820000.se: initialized [ 6.842202] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.842913] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.847106] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.854951] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.861985] tegra-se-nvhost 15830000.se: initialized [ 6.868197] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.868224] usb 1-2: Manufacturer: Generic [ 6.874618] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.880413] hub 1-2:1.0: USB hub found [ 6.882687] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.888656] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.889926] hub 1-2:1.0: 4 ports detected [ 6.893139] tegra-se-nvhost 15840000.se: initialized [ 6.899795] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.909504] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.911514] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.912235] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.917984] tegra_actmon d230000.actmon: in actmon_register()... [ 6.924017] Extcon AUX1(HDMI) enable [ 6.924174] tegradc 15210000.display: disp1 connected to head1->sor [ 6.930340] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.937924] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.945243] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.951103] tegradc 15210000.display: DT parsed successfully [ 6.955132] hvc_sysfs: hypervisor is not present [ 6.960450] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.965813] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.990451] ALSA device list: [ 7.010334] No soundcards found. [ 7.013576] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.019932] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.029767] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.032653] tegradc 15210000.display: probed [ 7.034282] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.046085] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.046108] usb 2-3: Manufacturer: Generic [ 7.055093] tegradc 15210000.display: fb registered [ 7.056987] hub 2-3:1.0: USB hub found [ 7.063338] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.065640] hub 2-3:1.0: 4 ports detected [ 7.070849] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.070859] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.072762] Freeing unused kernel memory: 3968K 榳ARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk 墁 7.093117] tegradc 15200000.display: blank - powerdown [ 7.103095] Run /init as init process [ 7.139047] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.139050] Extcon AUX1(HDMI) disable [ 7.150850] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.162564] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.163445] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.175038] tegradc 15200000.display: unblank [ 7.176180] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.176389] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.182384] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.184307] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.188314] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.188317] Extcon AUX1(HDMI) enable [ 7.201088] tegradc 15200000.display: sync windows ret = 247 [ 7.202881] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.231702] tegradc 15210000.display: blank - powerdown [ 7.233419] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.233423] Extcon DP: HPD disabled [ 7.233427] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.233446] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.239506] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.242657] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.249564] Extcon HDMI: HPD enabled [ 7.253237] tegradc 15200000.display: hdmi: plugged [ 7.284359] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.285925] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.285980] Root device found: mmcblk0p1 [ 7.290727] Found dev node: /dev/mmcblk0p1 [ 7.300088] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.301608] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.303089] usb 1-3: Product: Bluetooth Radio [ 7.304449] usb 1-3: Manufacturer: Realtek [ 7.305799] usb 1-3: SerialNumber: 00e04c000001 [ 7.327198] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.332742] Rootfs mounted over mmcblk0p1 [ 7.371009] Switching from initrd to actual rootfs [ 7.515974] systemd[1]: System time before build time, advancing clock. [ 7.591369] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.596458] systemd[1]: Detected architecture arm64. [ 7.634948] systemd[1]: Set hostname to . [ 7.801983] systemd-sysv-generator[253]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.142538] random: systemd: uninitialized urandom read (16 bytes read) [ 8.144458] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.146170] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.151888] systemd[1]: Created slice system-modprobe.slice. [ 8.155681] random: systemd: uninitialized urandom read (16 bytes read) [ 8.158465] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.161903] random: systemd: uninitialized urandom read (16 bytes read) [ 8.164582] systemd[1]: Created slice User and Session Slice. [ 8.168324] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.172693] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.176309] systemd[1]: Reached target User and Group Name Lookups. [ 8.179757] systemd[1]: Reached target Slices. [ 8.183059] systemd[1]: Reached target Swap. [ 8.187272] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.191058] systemd[1]: Listening on Syslog Socket. [ 8.194878] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.198409] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.202819] systemd[1]: Listening on Journal Audit Socket. [ 8.206604] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.210581] systemd[1]: Listening on Journal Socket. [ 8.214521] systemd[1]: Listening on udev Control Socket. [ 8.218233] systemd[1]: Listening on udev Kernel Socket. [ 8.226706] systemd[1]: Mounting Huge Pages File System... [ 8.238413] systemd[1]: Mounting POSIX Message Queue File System... [ 8.247225] systemd[1]: Mounting RPC Pipe File System... [ 8.256028] systemd[1]: Mounting Kernel Debug File System... [ 8.264885] systemd[1]: Mounting Kernel Trace File System... [ 8.275088] systemd[1]: Starting Journal Service... [ 8.284358] systemd[1]: Starting Set the console keyboard layout... [ 8.292759] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.296504] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.302936] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.312050] systemd[1]: Started Nameserver information manager. [ 8.316787] systemd[1]: Reached target Network (Pre). [ 8.324051] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.325969] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.333964] systemd[1]: Starting Load Kernel Modules... [ 8.341780] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.349520] systemd[1]: Starting udev Coldplug all Devices... [ 8.360547] systemd[1]: Mounted Huge Pages File System. [ 8.364360] systemd[1]: Mounted POSIX Message Queue File System. [ 8.368342] systemd[1]: Mounted RPC Pipe File System. [ 8.371944] systemd[1]: Mounted Kernel Debug File System. [ 8.376209] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.376331] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.376522] systemd[1]: Mounted Kernel Trace File System. [ 8.381557] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.381562] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.381572] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.381576] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.381765] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.381964] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.382115] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.382122] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.411605] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.416882] systemd[1]: nvfb-udev.service: Succeeded. [ 8.421686] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.434621] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.447083] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.448853] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.455581] systemd[1]: Starting Load/Save Random Seed... [ 8.464283] systemd[1]: Starting Create System Users... [ 8.498577] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.498577] [ 8.518843] systemd[1]: Finished Create System Users. [ 8.526728] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.537598] systemd[1]: Finished Set the console keyboard layout. [ 8.544601] systemd[1]: Finished Load Kernel Modules. [ 8.549096] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.556031] systemd[1]: Mounting Kernel Configuration File System... [ 8.563842] systemd[1]: Started OP-TEE Client Supplicant. [ 8.572295] systemd[1]: Starting Apply Kernel Variables... [ 8.582141] systemd[1]: Mounted Kernel Configuration File System. [ 8.595345] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.599280] systemd[1]: Reached target Local File Systems (Pre). [ 8.602456] systemd[1]: Reached target Local File Systems. [ 9.833620] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.843985] imx219 9-0010: board setup failed [ 9.845456] imx219: probe of 9-0010 failed with error -121 [ 9.850862] random: crng init done [ 9.852235] random: 7 urandom warning(s) missed due to ratelimiting [ 9.863329] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.879738] imx219 10-0010: board setup failed [ 9.881183] imx219: probe of 10-0010 failed with error -121 [ 9.978905] hot-surface-alert cooling state: 0 -> 1 [ 10.999677] using random self ethernet address [ 11.000916] using random host ethernet address [ 11.292677] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.292683] Creating 1 MTD partitions on "spi6.0": [ 11.292691] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.448800] using random self ethernet address [ 12.450523] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.947257] nvidia: loading out-of-tree module taints kernel. [ 57.916606] watchdog: watchdog0: watchdog did not stop! [ 58.392605] Trying to unregister non-registered hwtime source [ 61.450703] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.452898] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : 1, badf1 ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 73500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨/歊lk_early initialized 賏C: N滵ail_early initialized 鄤n殞use initialized hwwdt initialized ?sec漮194_ec_get_ec_list: found 45 ecs 酳re externa歋c initialized vmon_setup_monitors: found 3 monitors vmon initialized 鄟 D榥dc initialized 賏殞mon_populate_monitors: found 73 monitors ?found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 歊lk_dt_late initialized ?滱oc_late initialized pm_post initialized dbells initialized ? 03歍mce initialized cvc initialized ?23:20 UTC 2榥vfs_clk_mach_post initialized ?22 a榥vfs_clk_platform_post initialized 跾r歊vc_late initialized regulator_post initialized 踄h64 漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ?I/TC: WARNING漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ? This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.486] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.589] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.744] starting app kernel_boot_app [0003.745] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... 觨/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000090974000-0x00000000a0974000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000708] Console: colour dummy device 80x25 [ 0.002089] printk: console [tty0] enabled [ 0.002155] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002193] pid_max: default: 32768 minimum: 301 [ 0.002365] LSM: Security Framework initializing [ 0.002422] Yama: becoming mindful. [ 0.002468] SELinux: Initializing. [ 0.002618] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002656] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005518] rcu: Hierarchical SRCU implementation. [ 0.005759] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006471] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006520] DTB Build time: Aug 10 2022 20:31:49 [ 0.009313] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009552] Remapping and enabling EFI services. [ 0.011874] smp: Bringing up secondary CPUs ... [ 0.041086] Detected PIPT I-cache on CPU1 [ 0.041159] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070639] Detected PIPT I-cache on CPU2 [ 0.070782] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100409] Detected PIPT I-cache on CPU3 [ 0.100519] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130142] Detected PIPT I-cache on CPU4 [ 0.130330] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160087] Detected PIPT I-cache on CPU5 [ 0.160215] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160565] smp: Brought up 1 node, 6 CPUs [ 0.160766] SMP: Total of 6 processors activated. [ 0.160837] CPU features: detected: Privileged Access Never [ 0.160858] CPU features: detected: LSE atomic instructions [ 0.160872] CPU features: detected: User Access Override [ 0.160887] CPU features: detected: 32-bit EL0 Support [ 0.160900] CPU features: detected: RAS Extension Support [ 0.160913] CPU features: detected: CRC32 instructions [ 0.160927] CPU features: detected: 32-bit EL1 Support [ 0.229388] CPU: All CPU(s) started at EL2 [ 0.234402] devtmpfs: initialized [ 0.304356] Registered cp15_barrier emulation handler [ 0.304409] Registered setend emulation handler [ 0.304429] KASLR enabled [ 0.304754] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.304789] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.306765] pinctrl core: initialized pinctrl subsystem [ 0.307780] SMBIOS 3.0.0 present. [ 0.307852] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.308708] NET: Registered protocol family 16 [ 0.311068] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.311785] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.312812] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.312934] audit: initializing netlink subsys (disabled) [ 0.313312] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1 [ 0.313897] thermal_sys: Registered thermal governor 'step_wise' [ 0.313908] thermal_sys: Registered thermal governor 'power_allocator' [ 0.313965] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.317169] cpuidle: using governor menu [ 0.317647] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.318125] ASID allocator initialised with 32768 entries [ 0.318514] Serial: AMBA PL011 UART driver [ 0.323027] Tegra reboot handler registered. [ 0.411262] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.411408] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.411703] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.411790] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.411974] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.412027] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.412189] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.412240] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.412473] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.412557] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.415922] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.415969] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.416040] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.416094] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.416142] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.416177] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.416210] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.416242] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.416275] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.416307] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.416339] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.416371] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.416426] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.416462] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.416524] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.416584] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.416621] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.416731] mc-err: mcerr ops are set to t19x [ 0.431928] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.431955] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.431973] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.431991] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.440402] ACPI: Interpreter disabled. [ 0.441860] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.443501] iommu: Default domain type: Translated [ 0.443577] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.444102] SCSI subsystem initialized [ 0.444317] usbcore: registered new interface driver usbfs [ 0.444375] usbcore: registered new interface driver hub [ 0.444424] usbcore: registered new device driver usb [ 0.445014] mc: Linux media interface: v0.10 [ 0.445064] videodev: Linux video capture interface: v2.00 [ 0.445482] pps_core: LinuxPPS API ver. 1 registered [ 0.445498] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.445525] PTP clock support registered [ 0.445794] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.446149] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.446262] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.447024] Registered efivars operations [ 0.453830] FPGA manager framework [ 0.453960] Advanced Linux Sound Architecture Driver Initialized. [ 0.454781] Bluetooth: Core ver 2.22 [ 0.454836] NET: Registered protocol family 31 [ 0.454853] Bluetooth: HCI device and connection manager initialized [ 0.454874] Bluetooth: HCI socket layer initialized [ 0.454892] Bluetooth: L2CAP socket layer initialized [ 0.454948] Bluetooth: SCO socket layer initialized [ 0.456807] camchar: rtcpu character device driver loaded [ 0.457680] clocksource: Switched to clocksource arch_sys_counter [ 0.885555] VFS: Disk quotas dquot_6.6.0 [ 0.885689] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.886160] pnp: PnP ACPI: disabled [ 0.900374] la/ptsa driver initialized. [ 0.900546] NET: Registered protocol family 2 [ 0.900759] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.908357] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.908505] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.908891] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.909513] TCP: Hash tables configured (established 65536 bind 65536) [ 0.909715] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.909849] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.910129] NET: Registered protocol family 1 [ 0.910869] RPC: Registered named UNIX socket transport module. [ 0.910900] RPC: Registered udp transport module. [ 0.910916] RPC: Registered tcp transport module. [ 0.910932] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.910959] PCI: CLS 0 bytes, default 64 [ 0.911302] Trying to unpack rootfs image as initramfs... [ 1.179784] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.182589] Freeing initrd memory: 8196K [ 1.187008] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.187041] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.187075] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.187490] kvm [1]: IPA Size Limit: 40 bits [ 1.188044] kvm [1]: vgic interrupt IRQ9 [ 1.188611] kvm [1]: VHE mode initialized successfully [ 1.190254] Initialise system trusted keyrings [ 1.190605] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.196121] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.196994] NFS: Registering the id_resolver key type [ 1.197033] Key type id_resolver registered [ 1.197047] Key type id_legacy registered [ 1.197137] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.197161] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.197197] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.207007] NET: Registered protocol family 38 [ 1.207031] Key type asymmetric registered [ 1.207046] Asymmetric key parser 'x509' registered [ 1.207093] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.207393] io scheduler mq-deadline registered [ 1.207443] io scheduler kyber registered [ 1.213117] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.215939] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.216015] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.216084] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.216180] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.216278] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.221896] scrncapt: init (heads:4 wins:6 planes:4) [ 1.221954] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.223042] EINJ: ACPI disabled. [ 1.226498] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.226522] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.226537] tegra-pmc: ### PMC reset level: L1 [ 1.226550] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.226664] tegra-pmc: PMC Prod config success [ 1.232146] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.258280] random: fast init done [ 1.260361] printk: console [ttyTCU0] enabled [ 2.789792] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.794385] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.798967] arm-smmu 10000000.iommu: stage 1 translation [ 2.804161] arm-smmu 10000000.iommu: stage 2 translation [ 2.809934] arm-smmu 10000000.iommu: nested translation [ 2.815017] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.822190] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.832711] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.835318] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.842131] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.849510] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.855170] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.859893] arm-smmu 12000000.iommu: stage 1 translation [ 2.865147] arm-smmu 12000000.iommu: stage 2 translation [ 2.870830] arm-smmu 12000000.iommu: nested translation [ 2.876000] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.883185] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.893569] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.896558] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.902860] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.910534] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.919906] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.923265] tegra_profiler: auth: init [ 2.927821] THERMAL EST: found 3 subdevs [ 2.930967] THERMAL EST num_resources: 0 [ 2.935054] [THERMAL EST subdev 0] [ 2.938128] [THERMAL EST subdev 1] [ 2.941795] [THERMAL EST subdev 2] [ 2.944796] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.951253] THERMAL EST: thz register success. [ 2.955477] THERMAL EST: end of probe, return err: 0 [ 2.961070] nvsciipc: loaded module [ 2.968190] tun: Universal TUN/TAP device driver, 1.6 [ 2.970774] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.976807] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.982102] e1000e: Intel(R) PRO/1000 Network Driver [ 2.987294] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.993116] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.998668] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.004874] PPP generic driver version 2.4.2 [ 3.009138] PPP BSD Compression module registered [ 3.013395] PPP Deflate Compression module registered [ 3.018638] PPP MPPE Compression module registered [ 3.023907] usbcore: registered new interface driver r8152 [ 3.029153] usbcore: registered new interface driver asix [ 3.034497] usbcore: registered new interface driver ax88179_178a [ 3.040612] usbcore: registered new interface driver cdc_ether [ 3.046818] usbcore: registered new interface driver net1080 [ 3.052418] usbcore: registered new interface driver cdc_subset [ 3.058201] usbcore: registered new interface driver zaurus [ 3.063905] usbcore: registered new interface driver cdc_ncm [ 3.069574] usbcore: registered new interface driver aqc111 [ 3.075284] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.081293] ohci-pci: OHCI PCI platform driver [ 3.085864] ohci-platform: OHCI generic platform driver [ 3.091811] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.097760] usbcore: registered new interface driver uas [ 3.101883] usbcore: registered new interface driver usb-storage [ 3.108339] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.114289] mousedev: PS/2 mouse device common for all mice [ 3.119067] usbcore: registered new interface driver xpad [ 3.127394] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.130039] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.137827] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.144157] i2c /dev entries driver [ 3.147516] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.153472] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.159030] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.164019] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.169623] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.175135] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.180530] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.194181] device-mapper: uevent: version 1.0.3 [ 3.194601] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.200782] cpuidle: Initializing cpuidle driver [ 3.204786] sdhci: Secure Digital Host Controller Interface driver [ 3.209685] sdhci: Copyright(c) Pierre Ossman [ 3.213738] Synopsys Designware Multimedia Card Interface Driver [ 3.219711] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.225593] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.226238] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.239135] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.255948] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.264681] vdd-1v0: supplied by regulator-dummy [ 3.270012] vdd-1v8-hs: supplied by regulator-dummy [ 3.274632] vdd-1v8-ls: supplied by regulator-dummy [ 3.279309] vdd-1v8-ao: supplied by regulator-dummy [ 3.283023] vddio-ddr-1v1: supplied by regulator-dummy [ 3.287267] vdd-rtc: supplied by regulator-dummy [ 3.288835] spmic-ldo1: supplied by regulator-dummy [ 3.289915] vdd-ao-3v3: supplied by regulator-dummy [ 3.295973] vddio-emmc-3v3: supplied by regulator-dummy [ 3.302096] spmic-ldo4: supplied by regulator-dummy [ 3.303184] vdd-usb-3v3: supplied by regulator-dummy [ 3.310370] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.316348] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.321678] spmic-ldo8: supplied by vdd-1v8-ls [ 3.322986] gpio-510 (gpio_default): hogged as output/high [ 3.325609] gpio-511 (gpio_default): hogged as output/high [ 3.332750] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.471044] max77686-rtc max77620-rtc: registered as rtc0 [ 3.472014] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.472293] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 4.165499] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.166520] hid: raw HID events driver (C) Jiri Kosina [ 4.167185] usbcore: registered new interface driver usbhid [ 4.167317] usbhid: USB HID core driver [ 4.169025] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.170167] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 26.930551] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.006038] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.296 ms) 墁 4.255348] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.256015] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.256972] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.257525] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.259106] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.259652] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.260175] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.261267] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.261541] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.263032] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.263077] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.265533] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.285588] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.291886] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.296416] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.302744] denver_knobs_init:MTS_VERSION:55637613 [ 4.315829] t19x_cache tegra-cache: probed [ 4.318270] optee: probing for conduit method. [ 4.319057] optee: revision 3.16 (65cc2218) [ 4.319933] optee: dynamic shared memory is enabled [ 4.323974] optee: initialized driver [ 4.330266] nvpmodel: initialized successfully [ 4.331556] tegra_hv: get_hvd: not initialized yet [ 4.336305] user_ivc_mempool: hypervisor not present [ 4.342350] usbcore: registered new interface driver snd-usb-audio [ 4.348942] u32 classifier [ 4.349993] input device check on [ 4.353907] Actions configured [ 4.357286] Initializing XFRM netlink socket [ 4.362452] NET: Registered protocol family 10 [ 4.368146] Segment Routing with IPv6 [ 4.369888] NET: Registered protocol family 17 [ 4.374097] NET: Registered protocol family 15 [ 4.378346] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.392131] Bluetooth: RFCOMM socket layer initialized [ 4.396650] Bluetooth: RFCOMM ver 1.11 [ 4.400397] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.406571] Bluetooth: HIDP socket layer initialized [ 4.412498] 9pnet: Installing 9P2000 support [ 4.415720] Key type dns_resolver registered [ 4.421731] registered taskstats version 1 [ 4.424347] Loading compiled-in X.509 certificates [ 4.437478] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.440348] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.450762] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.452033] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.460899] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.468996] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.585742] tegra194-pcie 14160000.pcie: Link up [ 4.588934] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.589151] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.589291] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.589529] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.589780] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.590238] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.590734] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.604941] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.605333] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.605978] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.607546] pci 0004:01:00.0: supports D1 D2 [ 4.607741] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.620062] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.620334] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.620566] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.621095] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.621351] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.621510] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.621972] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.627684] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.636463] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.646563] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.650827] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.656674] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.663572] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.672880] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.674347] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.682644] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.691345] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.806677] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.807326] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.807509] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.807713] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.808245] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.808587] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.808991] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.809480] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.830240] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.830524] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.832246] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.833531] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.835055] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.836617] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.837757] pci 0005:00:00.0: Removing from iommu group 7 [ 5.838076] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.874371] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.897950] host1x 13e10000.host1x: initialized [ 5.899447] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.900258] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.901530] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.902253] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.903429] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.904044] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.905138] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.905867] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.906732] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.907414] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.916827] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.923598] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.933777] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.940653] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.950460] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.957587] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.967744] falcon 15340000.vic: Adding to iommu group 17 [ 5.982621] falcon 15340000.vic: initialized [ 5.983547] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.989036] falcon 15380000.nvjpg: initialized [ 5.989546] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.001529] falcon 154c0000.nvenc: initialized [ 6.002060] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.011351] falcon 15a80000.nvenc1: initialized [ 6.011928] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.023500] nvdec 15480000.nvdec: initialized [ 6.023988] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.033779] nvdec 15140000.nvdec1: initialized [ 6.034307] tsec 15500000.tsec: Adding to iommu group 18 [ 6.039823] tsec 15500000.tsec: initialized [ 6.040272] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.048162] tsec 15100000.tsecb: initialized [ 6.052313] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.078715] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.090392] gpio-374 (wifi-enable): hogged as output/high [ 6.090661] gpio-431 (camera-control-output-low): hogged as output/low [ 6.091057] gpio-432 (camera-control-output-low): hogged as output/low [ 6.092746] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.094755] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.095271] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.098792] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.104462] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.110256] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.115876] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.124092] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.131416] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.142989] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.147813] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.153987] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.162657] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.171774] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.179119] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.186564] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.193136] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.202476] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.208774] pva 16000000.pva0: Adding to iommu group 22 [ 6.235931] pva 16000000.pva0: initialized [ 6.240800] pva 16800000.pva1: Adding to iommu group 23 [ 6.260856] pva 16800000.pva1: initialized [ 6.265278] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.278847] nvdla 15880000.nvdla0: initialized [ 6.280229] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.296990] nvdla 158c0000.nvdla1: initialized [ 6.299463] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.299870] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.300237] tegradccommon 15200000.display-hub: dma mapping done [ 6.302365] tegradc 15200000.display: Adding to iommu group 26 [ 6.311054] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.311423] generic_infoframe_type: 0x87 [ 6.311652] tegradc 15200000.display: DT parsed successfully [ 6.311906] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.314599] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.314882] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.315839] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.317036] tegradc 15210000.display: Adding to iommu group 26 [ 6.318913] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.318939] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.319801] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.319811] tegra_cec 3960000.tegra_cec: probed [ 6.320468] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.320754] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.335461] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.339445] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.345520] kfuse 3830000.kfuse: initialized [ 6.351106] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.355937] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.361136] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.367759] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.368377] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.377625] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.392678] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.402906] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.407201] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.412245] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.437436] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.446121] tegradc 15210000.display: disp0 connected to head1->sor [ 6.451620] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.459771] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.465972] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.471717] tegradc 15210000.display: DT parsed successfully [ 6.489760] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.493367] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.502909] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.515984] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.524569] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.533077] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.539804] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.547068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.554273] usb usb1: Product: xHCI Host Controller [ 6.559192] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.565408] usb usb1: SerialNumber: 3610000.xhci [ 6.571391] hub 1-0:1.0: USB hub found [ 6.574023] hub 1-0:1.0: 4 ports detected [ 6.578833] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.583473] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.591332] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.599118] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.606952] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.614200] usb usb2: Product: xHCI Host Controller [ 6.618866] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.625079] usb usb2: SerialNumber: 3610000.xhci [ 6.630438] hub 2-0:1.0: USB hub found [ 6.633516] hub 2-0:1.0: 4 ports detected [ 6.676632] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.683068] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.684425] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.684596] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.698474] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.699591] tegra194-cpufreq ccplex: probed with BWMGR [ 6.701091] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.701511] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.701621] random: crng init done [ 6.702172] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.703541] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.711717] tegra194-vi5 15c10000.vi: initialized [ 6.712052] mmc0: CQHCI version 5.10 [ 6.712737] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.714260] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.714475] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.714481] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.714488] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.714492] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.714496] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.721746] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.727284] generic_infoframe_type: 0x87 [ 6.735405] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.735412] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.785449] tegradc 15200000.display: DT parsed successfully [ 6.786367] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.791305] tegradc 15200000.display: Display dc.00000000a4d4a6f0 registered with id=0 [ 6.799527] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.807097] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.814272] nvethernet 2490000.ethernet: Macsec not supported [ 6.822489] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.836618] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.837398] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.852698] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.859413] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.860655] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.865191] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.865362] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.871315] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.895145] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.896056] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.902955] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.909213] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.924768] tegra-se-nvhost 15810000.se: initialized [ 6.935049] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.935204] ************************************** [ 6.937335] CPU:0, Error:cbb-noc [ 6.940748] Error Logger : 0 [ 6.944075] ErrLog0 : 0x80030000 [ 6.947487] Transaction Type : RD - Read, Incrementing [ 6.953256] Error Code : SLV [ 6.956580] Error Source : Target [ 6.960256] Error Description : Target error detected by CBB slave [ 6.966737] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.974016] Packet header Lock : 0 [ 6.977931] Packet header Len1 : 3 [ 6.981348] NOC protocol version : version >= 2.7 [ 6.986419] ErrLog1 : 0x352424 [ 6.989486] ErrLog2 : 0x0 [ 6.992632] RouteId : 0x352424 [ 6.996044] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 7.000773] Targflow : host1x_p2pm/T/host1x_p2pm [ 7.005842] TargSubRange : 18 [ 7.009080] SeqId : 0 [ 7.011881] ErrLog3 : 0x4045c [ 7.014860] ErrLog4 : 0x0 [ 7.017749] Address accessed : 0x15b4045c [ 7.022293] ErrLog5 : 0x909f851 [ 7.025450] Non-Modify : 0x1 [ 7.029118] AXI ID : 0x12 [ 7.032011] Master ID : CCPLEX [ 7.035336] Security Group(GRPSEC): 0x7e [ 7.039536] Cache : 0x1 -- Bufferable [ 7.043993] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.050561] FALCONSEC : 0x0 [ 7.053728] Virtual Queuing Channel(VQC): 0x0 [ 7.058608] ************************************** [ 7.063646] ------------[ cut here ]------------ [ 7.067887] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.074708] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.079972] Modules linked in: [ 7.082680] CPU: 0 PID: 7 Comm: kworker/u12:0 Not tainted 5.10.104-tegra #1 [ 7.089843] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.102107] Workqueue: events_unbound async_run_entry_fn [ 7.107351] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.113649] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.118113] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.122835] sp : ffff800010003b30 [ 7.126179] x29: ffff800010003b30 x28: 0000000000000001 [ 7.131842] x27: 0000000000000005 x26: ffffd5184cca3f58 [ 7.137011] x25: ffffd5184d5fce10 x24: 0000000000000001 [ 7.142605] x23: ffffd5184cf97000 x22: ffffd5184d41ea00 [ 7.147861] x21: 000000000000000f x20: ffff546880ed9280 [ 7.153542] x19: ffffd5184d41ea00 x18: 0000000000000010 [ 7.158711] x17: 0000000000000007 x16: 00000000695106b1 [ 7.164223] x15: ffff546880163f70 x14: 0720072007200720 [ 7.169993] x13: 0720072007200720 x12: 0720072007200720 [ 7.175330] x11: 0720072007200720 x10: 0720072007200720 [ 7.180852] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.186102] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.191612] x5 : 0000000000057fa8 x4 : ffffd5184d2a7968 [ 7.197293] x3 : 00000000ffffffff x2 : ffffd5184b73e090 [ 7.202630] x1 : ffff546880163a00 x0 : 0000000100010100 [ 7.207710] Call trace: [ 7.210421] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.214453] __handle_irq_event_percpu+0x68/0x2a0 [ 7.219176] handle_irq_event_percpu+0x40/0xa0 [ 7.223481] handle_irq_event+0x50/0xf0 [ 7.227225] handle_fasteoi_irq+0xc0/0x170 [ 7.231253] generic_handle_irq+0x40/0x60 [ 7.235535] __handle_domain_irq+0x70/0xd0 [ 7.239478] efi_header_end+0xb0/0xf0 [ 7.243233] el1_irq+0xd0/0x180 [ 7.246207] __do_softirq+0xb4/0x3e8 [ 7.249885] irq_exit+0xc0/0xe0 [ 7.252859] __handle_domain_irq+0x74/0xd0 [ 7.256882] efi_header_end+0xb0/0xf0 [ 7.260557] el1_irq+0xd0/0x180 [ 7.263537] tegra_hda_get_dev_id+0x6c/0x2b0 [ 7.267579] tegra_hda_init+0x234/0x440 [ 7.271758] tegra_dc_hdmi_init+0x820/0xb50 [ 7.275608] tegra_dc_set_out+0x2cc/0x480 [ 7.279720] tegra_dc_probe+0xa90/0x1570 [ 7.283401] platform_drv_probe+0x5c/0xb0 [ 7.287603] really_probe+0xf8/0x3d0 [ 7.291535] driver_probe_device+0x60/0xc0 [ 7.295388] __device_attach_driver+0x8c/0xd0 [ 7.300021] bus_for_each_drv+0x8c/0xe0 [ 7.303527] __device_attach_async_helper+0xc4/0xf0 [ 7.308684] async_run_entry_fn+0x4c/0x150 [ 7.312627] process_one_work+0x1c4/0x4a0 [ 7.316994] worker_thread+0x54/0x430 [ 7.320414] kthread+0x148/0x170 [ 7.323996] ret_from_fork+0x10/0x24 [ 7.327677] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.333680] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.333806] ---[ end trace d8928834fe31bbf8 ]--- [ 7.340048] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.344737] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.344742] SMP: stopping secondary CPUs [ 7.344762] Kernel Offset: 0x55183b580000 from 0xffff800010000000 [ 7.344765] PHYS_OFFSET: 0xffffab9880000000 [ 7.344769] CPU features: 0x8240002,03802a30 [ 7.344772] Memory Limit: none [ 7.379556] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 73500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.120] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.128] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.915] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.922] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.336] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.337] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.337] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.352] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.355] I> found decompressor handler: lz4 [0002.583] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨/歊lk_early initialized 賏C: N滵ail_early initialized 鄤殞use initialized hwwdt initialized 鄚-sec漮194_ec_get_ec_list: found 45 ecs 酳re extern歋c initialized 跾潎mon_setup_monitors: found 3 monitors vmon initialized 鄟 D榥dc initialized fmon_populate_monitors: found 73 monitors 賏 found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 1歊lk_dt_late initialized noc_late initialized ?漥m_post initialized dbells initialized ?03歍mce initialized ?歊vc initialized ?3:20 UTC 20榥vfs_clk_mach_post initialized ?2 a榥vfs_clk_platform_post initialized 跾rc歊vc_late initialized regulator_post initialized 鄣64 漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized 觨/TC: WARNIN漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] 觩: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.204] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.253] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.538] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.745] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... 觨/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000683] Console: colour dummy device 80x25 [ 0.002116] printk: console [tty0] enabled [ 0.002178] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002213] pid_max: default: 32768 minimum: 301 [ 0.002382] LSM: Security Framework initializing [ 0.002437] Yama: becoming mindful. [ 0.002478] SELinux: Initializing. [ 0.002645] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002682] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005848] rcu: Hierarchical SRCU implementation. [ 0.006088] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006775] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006836] DTB Build time: Aug 10 2022 20:31:49 [ 0.009519] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009757] Remapping and enabling EFI services. [ 0.011631] smp: Bringing up secondary CPUs ... [ 0.044890] Detected PIPT I-cache on CPU1 [ 0.044992] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.077107] Detected PIPT I-cache on CPU2 [ 0.077255] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.106747] Detected PIPT I-cache on CPU3 [ 0.106829] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136567] Detected PIPT I-cache on CPU4 [ 0.136646] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166353] Detected PIPT I-cache on CPU5 [ 0.166500] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166933] smp: Brought up 1 node, 6 CPUs [ 0.167271] SMP: Total of 6 processors activated. [ 0.167339] CPU features: detected: Privileged Access Never [ 0.167375] CPU features: detected: LSE atomic instructions [ 0.167402] CPU features: detected: User Access Override [ 0.167427] CPU features: detected: 32-bit EL0 Support [ 0.167451] CPU features: detected: RAS Extension Support [ 0.167477] CPU features: detected: CRC32 instructions [ 0.167500] CPU features: detected: 32-bit EL1 Support [ 0.235993] CPU: All CPU(s) started at EL2 [ 0.241721] devtmpfs: initialized [ 0.290930] Registered cp15_barrier emulation handler [ 0.291041] Registered setend emulation handler [ 0.291074] KASLR enabled [ 0.291341] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291388] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292731] pinctrl core: initialized pinctrl subsystem [ 0.293694] SMBIOS 3.0.0 present. [ 0.293743] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294462] NET: Registered protocol family 16 [ 0.296301] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296810] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297533] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297608] audit: initializing netlink subsys (disabled) [ 0.297881] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.298309] thermal_sys: Registered thermal governor 'step_wise' [ 0.298318] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298377] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300790] cpuidle: using governor menu [ 0.301075] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301524] ASID allocator initialised with 32768 entries [ 0.301746] Serial: AMBA PL011 UART driver [ 0.305064] Tegra reboot handler registered. [ 0.377184] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.377341] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377534] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377617] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377787] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377850] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.377977] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.378037] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.378216] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.378294] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.380756] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.380811] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380873] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.380917] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.380962] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.381005] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.381059] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.381107] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.381147] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.381187] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.381248] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.381305] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.381346] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.381390] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.381430] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.381469] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.381509] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.381615] mc-err: mcerr ops are set to t19x [ 0.394793] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.394827] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.394848] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.394868] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.402844] ACPI: Interpreter disabled. [ 0.404826] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406758] iommu: Default domain type: Translated [ 0.406878] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407432] SCSI subsystem initialized [ 0.407723] usbcore: registered new interface driver usbfs [ 0.407787] usbcore: registered new interface driver hub [ 0.407841] usbcore: registered new device driver usb [ 0.408505] mc: Linux media interface: v0.10 [ 0.408578] videodev: Linux video capture interface: v2.00 [ 0.409087] pps_core: LinuxPPS API ver. 1 registered [ 0.409105] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.409135] PTP clock support registered [ 0.409480] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.409920] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.410015] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410938] Registered efivars operations [ 0.418630] FPGA manager framework [ 0.418763] Advanced Linux Sound Architecture Driver Initialized. [ 0.419375] Bluetooth: Core ver 2.22 [ 0.419421] NET: Registered protocol family 31 [ 0.419434] Bluetooth: HCI device and connection manager initialized [ 0.419451] Bluetooth: HCI socket layer initialized [ 0.419472] Bluetooth: L2CAP socket layer initialized [ 0.419493] Bluetooth: SCO socket layer initialized [ 0.421329] camchar: rtcpu character device driver loaded [ 0.422662] clocksource: Switched to clocksource arch_sys_counter [ 0.914275] VFS: Disk quotas dquot_6.6.0 [ 0.914378] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.914858] pnp: PnP ACPI: disabled [ 0.928061] la/ptsa driver initialized. [ 0.928211] NET: Registered protocol family 2 [ 0.928503] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.937558] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.937726] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.938118] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.938754] TCP: Hash tables configured (established 65536 bind 65536) [ 0.938910] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.939077] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.939359] NET: Registered protocol family 1 [ 0.940230] RPC: Registered named UNIX socket transport module. [ 0.940261] RPC: Registered udp transport module. [ 0.940275] RPC: Registered tcp transport module. [ 0.940288] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.940359] PCI: CLS 0 bytes, default 64 [ 0.940621] Trying to unpack rootfs image as initramfs... [ 1.199215] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.202219] Freeing initrd memory: 8196K [ 1.207051] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.207087] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.207124] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.207470] kvm [1]: IPA Size Limit: 40 bits [ 1.208032] kvm [1]: vgic interrupt IRQ9 [ 1.208539] kvm [1]: VHE mode initialized successfully [ 1.210053] Initialise system trusted keyrings [ 1.210363] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.215971] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.216764] NFS: Registering the id_resolver key type [ 1.216801] Key type id_resolver registered [ 1.216846] Key type id_legacy registered [ 1.216944] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.216968] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.217038] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.226605] NET: Registered protocol family 38 [ 1.226633] Key type asymmetric registered [ 1.226677] Asymmetric key parser 'x509' registered [ 1.226722] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.227014] io scheduler mq-deadline registered [ 1.227032] io scheduler kyber registered [ 1.233393] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.236641] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.236726] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.236799] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.236868] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.236936] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.242766] scrncapt: init (heads:4 wins:6 planes:4) [ 1.242902] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.243879] EINJ: ACPI disabled. [ 1.247543] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.247597] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.247612] tegra-pmc: ### PMC reset level: L1 [ 1.247625] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.247703] tegra-pmc: PMC Prod config success [ 1.252807] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.258208] random: fast init done [ 1.258923] printk: console [ttyTCU0] enabled [ 2.810244] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.814573] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.819285] arm-smmu 10000000.iommu: stage 1 translation [ 2.824869] arm-smmu 10000000.iommu: stage 2 translation [ 2.830383] arm-smmu 10000000.iommu: nested translation [ 2.835474] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.842643] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.852935] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.856053] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.862843] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.870403] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.875882] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.880353] arm-smmu 12000000.iommu: stage 1 translation [ 2.886117] arm-smmu 12000000.iommu: stage 2 translation [ 2.891285] arm-smmu 12000000.iommu: nested translation [ 2.896980] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.904149] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.914179] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.917276] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.923863] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.931018] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.940759] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.944090] tegra_profiler: auth: init [ 2.948668] THERMAL EST: found 3 subdevs [ 2.951929] THERMAL EST num_resources: 0 [ 2.955521] [THERMAL EST subdev 0] [ 2.959093] [THERMAL EST subdev 1] [ 2.962228] [THERMAL EST subdev 2] [ 2.965752] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.972179] THERMAL EST: thz register success. [ 2.976447] THERMAL EST: end of probe, return err: 0 [ 2.981724] nvsciipc: loaded module [ 2.988847] tun: Universal TUN/TAP device driver, 1.6 [ 2.990995] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.997250] hns3: Copyright (c) 2017 Huawei Corporation. [ 3.003067] e1000e: Intel(R) PRO/1000 Network Driver [ 3.007751] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.014083] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.019387] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.025520] PPP generic driver version 2.4.2 [ 3.029778] PPP BSD Compression module registered [ 3.034102] PPP Deflate Compression module registered [ 3.039347] PPP MPPE Compression module registered [ 3.044614] usbcore: registered new interface driver r8152 [ 3.050126] usbcore: registered new interface driver asix [ 3.055454] usbcore: registered new interface driver ax88179_178a [ 3.061578] usbcore: registered new interface driver cdc_ether [ 3.067277] usbcore: registered new interface driver net1080 [ 3.073132] usbcore: registered new interface driver cdc_subset [ 3.078922] usbcore: registered new interface driver zaurus [ 3.084643] usbcore: registered new interface driver cdc_ncm [ 3.090284] usbcore: registered new interface driver aqc111 [ 3.096179] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.102000] ohci-pci: OHCI PCI platform driver [ 3.106557] ohci-platform: OHCI generic platform driver [ 3.112517] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.118974] usbcore: registered new interface driver uas [ 3.122563] usbcore: registered new interface driver usb-storage [ 3.128763] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.135039] mousedev: PS/2 mouse device common for all mice [ 3.139752] usbcore: registered new interface driver xpad [ 3.148080] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.150725] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.158533] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.165113] i2c /dev entries driver [ 3.168430] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.174255] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.179254] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.184949] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.190297] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.195550] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.201245] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.214048] device-mapper: uevent: version 1.0.3 [ 3.214486] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.221363] cpuidle: Initializing cpuidle driver [ 3.225184] sdhci: Secure Digital Host Controller Interface driver [ 3.230102] sdhci: Copyright(c) Pierre Ossman [ 3.234453] Synopsys Designware Multimedia Card Interface Driver [ 3.240418] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.246304] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.247185] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.259789] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.281811] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.290912] vdd-1v0: supplied by regulator-dummy [ 3.296363] vdd-1v8-hs: supplied by regulator-dummy [ 3.301202] vdd-1v8-ls: supplied by regulator-dummy [ 3.306176] vdd-1v8-ao: supplied by regulator-dummy [ 3.310204] vddio-ddr-1v1: supplied by regulator-dummy [ 3.314681] vdd-rtc: supplied by regulator-dummy [ 3.316506] spmic-ldo1: supplied by regulator-dummy [ 3.317779] vdd-ao-3v3: supplied by regulator-dummy [ 3.323940] vddio-emmc-3v3: supplied by regulator-dummy [ 3.330284] spmic-ldo4: supplied by regulator-dummy [ 3.331584] vdd-usb-3v3: supplied by regulator-dummy [ 3.337766] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.344032] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.349519] spmic-ldo8: supplied by vdd-1v8-ls [ 3.351031] gpio-510 (gpio_default): hogged as output/high [ 3.352429] gpio-511 (gpio_default): hogged as output/high [ 3.355386] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.492786] max77686-rtc max77620-rtc: registered as rtc0 [ 3.494098] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.494418] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 4.314102] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.315275] hid: raw HID events driver (C) Jiri Kosina [ 4.316102] usbcore: registered new interface driver usbhid [ 4.316259] usbhid: USB HID core driver [ 4.318414] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.319785] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 27.452557] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.526826] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 75.076 ms) 墁 4.404012] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.404569] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.405533] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.406142] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.407931] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.408564] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.409118] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.410332] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.410593] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.413438] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.420861] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.427207] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.431908] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.438074] denver_knobs_init:MTS_VERSION:55637613 [ 4.449760] t19x_cache tegra-cache: probed [ 4.452598] optee: probing for conduit method. [ 4.453428] optee: revision 3.16 (65cc2218) [ 4.454284] optee: dynamic shared memory is enabled [ 4.459228] optee: initialized driver [ 4.465645] nvpmodel: initialized successfully [ 4.466794] tegra_hv: get_hvd: not initialized yet [ 4.471377] user_ivc_mempool: hypervisor not present [ 4.477084] usbcore: registered new interface driver snd-usb-audio [ 4.483921] u32 classifier [ 4.484883] input device check on [ 4.488746] Actions configured [ 4.492581] Initializing XFRM netlink socket [ 4.497305] NET: Registered protocol family 10 [ 4.503998] Segment Routing with IPv6 [ 4.504765] NET: Registered protocol family 17 [ 4.508782] NET: Registered protocol family 15 [ 4.513228] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.526754] Bluetooth: RFCOMM socket layer initialized [ 4.531459] Bluetooth: RFCOMM ver 1.11 [ 4.535605] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.541218] Bluetooth: HIDP socket layer initialized [ 4.547540] 9pnet: Installing 9P2000 support [ 4.550580] Key type dns_resolver registered [ 4.556339] registered taskstats version 1 [ 4.559099] Loading compiled-in X.509 certificates [ 4.571391] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.574802] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.585043] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.587295] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.595583] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.604240] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.718888] tegra194-pcie 14160000.pcie: Link up [ 4.722104] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.722329] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.722481] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.722783] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.722997] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.723376] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.723791] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.733475] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.733936] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.734445] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.736077] pci 0004:01:00.0: supports D1 D2 [ 4.736237] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.744105] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.744450] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.744671] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.745039] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.745265] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.747391] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.753453] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.760797] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.769590] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.779443] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.784231] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.789710] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.796517] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.805730] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.807382] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.816051] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.824231] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.939631] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.940240] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.940517] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.940716] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.941099] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.941346] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.941771] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.942361] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.964660] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.964973] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.966983] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.968098] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.969403] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.971246] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.972296] pci 0005:00:00.0: Removing from iommu group 7 [ 5.972806] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 6.011235] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.034080] host1x 13e10000.host1x: initialized [ 6.035593] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.036731] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.037904] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.038590] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.039879] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.040550] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.041696] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.042458] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.043461] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.044225] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.049851] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.056408] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.066898] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.073550] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.083488] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.090804] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.100593] falcon 15340000.vic: Adding to iommu group 17 [ 6.115330] falcon 15340000.vic: initialized [ 6.116361] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.121812] falcon 15380000.nvjpg: initialized [ 6.122350] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.133300] falcon 154c0000.nvenc: initialized [ 6.133988] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.143744] falcon 15a80000.nvenc1: initialized [ 6.144352] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.156345] nvdec 15480000.nvdec: initialized [ 6.156905] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.167983] nvdec 15140000.nvdec1: initialized [ 6.168575] tsec 15500000.tsec: Adding to iommu group 18 [ 6.174137] tsec 15500000.tsec: initialized [ 6.174762] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.180613] tsec 15100000.tsecb: initialized [ 6.184354] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.213405] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.225176] gpio-374 (wifi-enable): hogged as output/high [ 6.225519] gpio-431 (camera-control-output-low): hogged as output/low [ 6.225790] gpio-432 (camera-control-output-low): hogged as output/low [ 6.227287] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.229292] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.229784] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.231645] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.237049] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.242966] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.248354] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.257097] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.264185] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.275632] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.280938] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.286928] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.295535] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.305048] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.312097] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.319562] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.326105] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.335510] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.341715] pva 16000000.pva0: Adding to iommu group 22 [ 6.369881] pva 16000000.pva0: initialized [ 6.374241] pva 16800000.pva1: Adding to iommu group 23 [ 6.385737] pva 16800000.pva1: initialized [ 6.389791] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.402698] nvdla 15880000.nvdla0: initialized [ 6.404057] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.410190] random: crng init done [ 6.413209] nvdla 158c0000.nvdla1: initialized [ 6.415701] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.415999] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.416307] tegradccommon 15200000.display-hub: dma mapping done [ 6.418267] tegradc 15200000.display: Adding to iommu group 26 [ 6.426866] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.427258] generic_infoframe_type: 0x87 [ 6.427535] tegradc 15200000.display: DT parsed successfully [ 6.427901] tegradc 15200000.display: Display dc.000000008b745616 registered with id=0 [ 6.434809] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.437020] tegradc 15210000.display: Adding to iommu group 26 [ 6.438920] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.438930] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.438936] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.439834] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.439846] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.441094] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.441307] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.442810] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.448522] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.456636] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.519671] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.520212] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.524708] tegra_cec 3960000.tegra_cec: probed [ 6.525760] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.534267] tegradc 15210000.display: disp0 connected to head1->sor [ 6.539290] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.542489] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.549090] kfuse 3830000.kfuse: initialized [ 6.555500] tegradc 15210000.display: DT parsed successfully [ 6.563141] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.567198] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.587230] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.593978] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.600312] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.609552] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.615169] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.624235] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.629667] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.650335] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.650776] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.652934] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.661508] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.670070] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.676676] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.683936] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.691362] usb usb1: Product: xHCI Host Controller [ 6.696077] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.702374] usb usb1: SerialNumber: 3610000.xhci [ 6.708330] hub 1-0:1.0: USB hub found [ 6.710966] hub 1-0:1.0: 4 ports detected [ 6.715855] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.720351] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.728274] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.736046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.743821] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.750785] usb usb2: Product: xHCI Host Controller [ 6.756020] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.762224] usb usb2: SerialNumber: 3610000.xhci [ 6.768012] hub 2-0:1.0: USB hub found [ 6.770451] hub 2-0:1.0: 4 ports detected [ 6.815836] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.822417] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.824288] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.824522] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.838363] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.839488] tegra194-cpufreq ccplex: probed with BWMGR [ 6.840779] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.841213] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.841649] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.843047] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.850476] tegra194-vi5 15c10000.vi: initialized [ 6.852037] tegradc 15210000.display: disp0 connected to head1->sor [ 6.852071] mmc0: CQHCI version 5.10 [ 6.852360] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.853209] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.853404] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.853409] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.853415] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.853420] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.853424] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.858740] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.861390] tegradc 15210000.display: DT parsed successfully [ 6.867580] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.875553] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.882289] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.883567] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.889017] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.896450] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.901898] generic_infoframe_type: 0x87 [ 6.914255] tegradc 15200000.display: DT parsed successfully [ 6.920936] nvethernet 2490000.ethernet: Macsec not supported [ 6.922262] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.928625] tegradc 15200000.display: Display dc.00000000159b4923 registered with id=0 [ 6.936531] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.949884] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.957382] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.961272] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.961279] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.972853] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.974700] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.980941] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.988400] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.988564] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.995565] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.003470] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.011474] tegra-se-nvhost 15810000.se: initialized [ 7.012830] mmc0: Command Queue Engine enabled [ 7.012835] mmc0: periodic cache flush enabled [ 7.012849] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.013325] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.013485] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.017347] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.018162] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.031175] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.055981] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 7.055986] ************************************** [ 7.055988] CPU:0, Error:cbb-noc [ 7.055991] Error Logger : 0 [ 7.056000] ErrLog0 : 0x80030000 [ 7.056003] Transaction Type : RD - Read, Incrementing [ 7.056006] Error Code : SLV [ 7.056008] Error Source : Target [ 7.056011] Error Description : Target error detected by CBB slave [ 7.056021] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 7.056038] Packet header Lock : 0 [ 7.056041] Packet header Len1 : 3 [ 7.056043] NOC protocol version : version >= 2.7 [ 7.056049] ErrLog1 : 0x35242a [ 7.056051] ErrLog2 : 0x0 [ 7.056054] RouteId : 0x35242a [ 7.056057] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 7.056059] Targflow : host1x_p2pm/T/host1x_p2pm [ 7.056062] TargSubRange : 18 [ 7.056064] SeqId : 0 [ 7.056067] ErrLog3 : 0x4045c [ 7.056069] ErrLog4 : 0x0 [ 7.056073] Address accessed : 0x15b4045c [ 7.056075] ErrLog5 : 0xa89f851 [ 7.056078] Non-Modify : 0x1 [ 7.056080] AXI ID : 0x15 [ 7.056083] Master ID : CCPLEX [ 7.056086] Security Group(GRPSEC): 0x7e [ 7.056088] Cache : 0x1 -- Bufferable [ 7.056092] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.056094] FALCONSEC : 0x0 [ 7.056096] Virtual Queuing Channel(VQC): 0x0 [ 7.056100] ************************************** [ 7.056154] ------------[ cut here ]------------ [ 7.056157] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.056163] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.056167] Modules linked in: [ 7.056187] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.056190] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.056212] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.056221] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.056225] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.056228] sp : ffff800010003de0 [ 7.056236] x29: ffff800010003de0 x28: 0000000000000001 [ 7.056249] x27: 0000000000000005 x26: ffffbafc30c63f58 [ 7.056261] x25: ffffbafc315bce10 x24: 0000000000000001 [ 7.056274] x23: ffffbafc30f57000 x22: ffffbafc313dea00 [ 7.056286] x21: 000000000000000f x20: ffff285b40e66b80 [ 7.056299] x19: ffffbafc313dea00 x18: 0000000000000020 [ 7.056311] x17: 0000000000000007 x16: 0000000000000068 [ 7.056324] x15: ffff285b40164df0 x14: ffffffffffffffff [ 7.056357] x13: ffffbafc3156ade8 x12: ffffbafc3156aa2d [ 7.056364] x11: 0000000000000038 x10: 0101010101010101 [ 7.056372] x9 : ffff800010003cf0 x8 : 2a2a2a2a2a2a2a2a [ 7.056379] x7 : 2a2a2a2a2a2a2a2a x6 : 000000002b15e000 [ 7.056387] x5 : 000000000000000c x4 : 00000000fffff2b5 [ 7.056394] x3 : 00000000ffffffff x2 : ffffbafc2f6fe090 [ 7.056402] x1 : ffff285b40164880 x0 : 0000000100010001 [ 7.056409] Call trace: [ 7.056414] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.056422] __handle_irq_event_percpu+0x68/0x2a0 [ 7.056428] handle_irq_event_percpu+0x40/0xa0 [ 7.056435] handle_irq_event+0x50/0xf0 [ 7.056440] handle_fasteoi_irq+0xc0/0x170 [ 7.056445] generic_handle_irq+0x40/0x60 [ 7.056450] __handle_domain_irq+0x70/0xd0 [ 7.056454] efi_header_end+0xb0/0xf0 [ 7.056458] el1_irq+0xd0/0x180 [ 7.056463] console_unlock+0x36c/0x540 [ 7.056467] vprintk_emit+0x124/0x2a0 [ 7.056474] dev_vprintk_emit+0x154/0x184 [ 7.056479] dev_printk_emit+0x80/0xa8 [ 7.056483] __dev_printk+0x7c/0xa4 [ 7.056487] _dev_info+0x74/0x9c [ 7.056494] tegra_se_probe+0xab4/0xde0 [ 7.056499] platform_drv_probe+0x5c/0xb0 [ 7.056505] really_probe+0xf8/0x3d0 [ 7.056510] driver_probe_device+0x60/0xc0 [ 7.056514] device_driver_attach+0x78/0x80 [ 7.056518] __driver_attach+0x68/0xf0 [ 7.056522] bus_for_each_dev+0x84/0xe0 [ 7.056527] driver_attach+0x34/0x40 [ 7.056531] bus_add_driver+0x150/0x1f0 [ 7.056535] driver_register+0x68/0x120 [ 7.056539] __platform_driver_register+0x64/0x70 [ 7.056546] tegra_se_module_init+0x28/0x30 [ 7.056550] do_one_initcall+0x50/0x2f0 [ 7.056557] kernel_init_freeable+0x254/0x2d4 [ 7.056562] kernel_init+0x1c/0x118 [ 7.056566] ret_from_fork+0x10/0x24 [ 7.056594] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.056603] ---[ end trace 772dd30a6591da29 ]--- [ 7.056607] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.056611] SMP: stopping secondary CPUs [ 7.056639] Kernel Offset: 0x3afc1f540000 from 0xffff800010000000 [ 7.056641] PHYS_OFFSET: 0xffffd7a5c0000000 [ 7.056649] CPU features: 0x8240002,03802a30 [ 7.056652] Memory Limit: none [ 7.567191] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 74000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨/歊lk_early initialized 賏C: 滵ail_early initialized 誏o殞use initialized hwwdt initialized 鄚-se漮194_ec_get_ec_list: found 45 ecs 踄ure extern歋c initialized 跾潎mon_setup_monitors: found 3 monitors vmon initialized 鄟 D榥dc initialized fmon_populate_monitors: found 73 monitors 賏 found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 歊lk_dt_late initialized ?滱oc_late initialized ?漥m_post initialized dbells initialized ?03歍mce initialized ?歊vc initialized ?3:20 UTC 20榥vfs_clk_mach_post initialized ?2 a榥vfs_clk_platform_post initialized 跾rc歊vc_late initialized regulator_post initialized 鄣64 漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized 觨/TC: WARNIN漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] 觩: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... 觨/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000678] Console: colour dummy device 80x25 [ 0.002199] printk: console [tty0] enabled [ 0.002260] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002294] pid_max: default: 32768 minimum: 301 [ 0.002507] LSM: Security Framework initializing [ 0.002565] Yama: becoming mindful. [ 0.002607] SELinux: Initializing. [ 0.002806] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002845] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005917] rcu: Hierarchical SRCU implementation. [ 0.006157] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006936] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006966] DTB Build time: Aug 10 2022 20:31:49 [ 0.009503] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009776] Remapping and enabling EFI services. [ 0.011749] smp: Bringing up secondary CPUs ... [ 0.040910] Detected PIPT I-cache on CPU1 [ 0.041020] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071671] Detected PIPT I-cache on CPU2 [ 0.071815] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101352] Detected PIPT I-cache on CPU3 [ 0.101441] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131103] Detected PIPT I-cache on CPU4 [ 0.131269] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161050] Detected PIPT I-cache on CPU5 [ 0.161187] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161537] smp: Brought up 1 node, 6 CPUs [ 0.161747] SMP: Total of 6 processors activated. [ 0.161820] CPU features: detected: Privileged Access Never [ 0.161845] CPU features: detected: LSE atomic instructions [ 0.161860] CPU features: detected: User Access Override [ 0.161874] CPU features: detected: 32-bit EL0 Support [ 0.161887] CPU features: detected: RAS Extension Support [ 0.161899] CPU features: detected: CRC32 instructions [ 0.161912] CPU features: detected: 32-bit EL1 Support [ 0.232066] CPU: All CPU(s) started at EL2 [ 0.238894] devtmpfs: initialized [ 0.284675] Registered cp15_barrier emulation handler [ 0.284787] Registered setend emulation handler [ 0.284810] KASLR enabled [ 0.285070] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285098] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286476] pinctrl core: initialized pinctrl subsystem [ 0.287552] SMBIOS 3.0.0 present. [ 0.287582] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288157] NET: Registered protocol family 16 [ 0.289994] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290496] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291203] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291256] audit: initializing netlink subsys (disabled) [ 0.291486] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.291909] thermal_sys: Registered thermal governor 'step_wise' [ 0.291916] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291930] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294178] cpuidle: using governor menu [ 0.294524] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295019] ASID allocator initialised with 32768 entries [ 0.295230] Serial: AMBA PL011 UART driver [ 0.298232] Tegra reboot handler registered. [ 0.368747] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.368867] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.369040] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.369081] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.369201] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.369240] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.369350] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.369403] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.369520] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.369577] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.371778] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.371842] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.371869] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.371894] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.371921] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.371950] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.371992] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.372020] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.372044] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.372067] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.372089] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.372111] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.372132] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.372154] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.372175] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.372197] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.372219] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.372304] mc-err: mcerr ops are set to t19x [ 0.385317] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.385340] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.385352] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.385363] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.392664] ACPI: Interpreter disabled. [ 0.393878] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.395138] iommu: Default domain type: Translated [ 0.395195] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.395538] SCSI subsystem initialized [ 0.395704] usbcore: registered new interface driver usbfs [ 0.395750] usbcore: registered new interface driver hub [ 0.395785] usbcore: registered new device driver usb [ 0.396200] mc: Linux media interface: v0.10 [ 0.396230] videodev: Linux video capture interface: v2.00 [ 0.396516] pps_core: LinuxPPS API ver. 1 registered [ 0.396527] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.396546] PTP clock support registered [ 0.396743] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.397006] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.397093] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.397817] Registered efivars operations [ 0.403503] FPGA manager framework [ 0.403648] Advanced Linux Sound Architecture Driver Initialized. [ 0.404292] Bluetooth: Core ver 2.22 [ 0.404334] NET: Registered protocol family 31 [ 0.404345] Bluetooth: HCI device and connection manager initialized [ 0.404360] Bluetooth: HCI socket layer initialized [ 0.404374] Bluetooth: L2CAP socket layer initialized [ 0.404394] Bluetooth: SCO socket layer initialized [ 0.405979] camchar: rtcpu character device driver loaded [ 0.406708] clocksource: Switched to clocksource arch_sys_counter [ 0.751554] VFS: Disk quotas dquot_6.6.0 [ 0.751634] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.752017] pnp: PnP ACPI: disabled [ 0.764272] la/ptsa driver initialized. [ 0.764392] NET: Registered protocol family 2 [ 0.764567] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.769863] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.769976] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.770229] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.770657] TCP: Hash tables configured (established 65536 bind 65536) [ 0.770857] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.770948] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.771171] NET: Registered protocol family 1 [ 0.771755] RPC: Registered named UNIX socket transport module. [ 0.771768] RPC: Registered udp transport module. [ 0.771778] RPC: Registered tcp transport module. [ 0.771788] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.771802] PCI: CLS 0 bytes, default 64 [ 0.771983] Trying to unpack rootfs image as initramfs... [ 0.953896] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.955948] Freeing initrd memory: 8196K [ 0.959770] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.959814] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.959857] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.960276] kvm [1]: IPA Size Limit: 40 bits [ 0.960798] kvm [1]: vgic interrupt IRQ9 [ 0.961249] kvm [1]: VHE mode initialized successfully [ 0.962770] Initialise system trusted keyrings [ 0.963111] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.969344] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.970304] NFS: Registering the id_resolver key type [ 0.970344] Key type id_resolver registered [ 0.970361] Key type id_legacy registered [ 0.970471] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.970504] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.970546] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.980245] NET: Registered protocol family 38 [ 0.980274] Key type asymmetric registered [ 0.980331] Asymmetric key parser 'x509' registered [ 0.980385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.980624] io scheduler mq-deadline registered [ 0.980642] io scheduler kyber registered [ 0.987062] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.990112] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.990197] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.990273] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.990344] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.990414] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.997155] scrncapt: init (heads:4 wins:6 planes:4) [ 0.997326] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.998552] EINJ: ACPI disabled. [ 1.002106] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.002134] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.002149] tegra-pmc: ### PMC reset level: L1 [ 1.002163] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.002267] tegra-pmc: PMC Prod config success [ 1.007931] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.013313] random: fast init done [ 1.014007] printk: console [ttyTCU0] enabled [ 2.564982] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.569992] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.574591] arm-smmu 10000000.iommu: stage 1 translation [ 2.579733] arm-smmu 10000000.iommu: stage 2 translation [ 2.585494] arm-smmu 10000000.iommu: nested translation [ 2.590577] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.597754] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.609134] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.611398] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.617700] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.625592] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.630747] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.635492] arm-smmu 12000000.iommu: stage 1 translation [ 2.641230] arm-smmu 12000000.iommu: stage 2 translation [ 2.646425] arm-smmu 12000000.iommu: nested translation [ 2.652112] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.659265] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.670433] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.672389] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.678715] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.686383] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.695791] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.699150] tegra_profiler: auth: init [ 2.703350] THERMAL EST: found 3 subdevs [ 2.707043] THERMAL EST num_resources: 0 [ 2.710606] [THERMAL EST subdev 0] [ 2.714207] [THERMAL EST subdev 1] [ 2.717363] [THERMAL EST subdev 2] [ 2.720915] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.727124] THERMAL EST: thz register success. [ 2.731309] THERMAL EST: end of probe, return err: 0 [ 2.736798] nvsciipc: loaded module [ 2.743798] tun: Universal TUN/TAP device driver, 1.6 [ 2.746250] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.752373] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.758187] e1000e: Intel(R) PRO/1000 Network Driver [ 2.762863] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.769233] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.774518] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.780770] PPP generic driver version 2.4.2 [ 2.784677] PPP BSD Compression module registered [ 2.789220] PPP Deflate Compression module registered [ 2.794465] PPP MPPE Compression module registered [ 2.799731] usbcore: registered new interface driver r8152 [ 2.805239] usbcore: registered new interface driver asix [ 2.810343] usbcore: registered new interface driver ax88179_178a [ 2.816456] usbcore: registered new interface driver cdc_ether [ 2.822648] usbcore: registered new interface driver net1080 [ 2.827999] usbcore: registered new interface driver cdc_subset [ 2.834294] usbcore: registered new interface driver zaurus [ 2.839990] usbcore: registered new interface driver cdc_ncm [ 2.845405] usbcore: registered new interface driver aqc111 [ 2.851069] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.857383] ohci-pci: OHCI PCI platform driver [ 2.861417] ohci-platform: OHCI generic platform driver [ 2.867317] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.873838] usbcore: registered new interface driver uas [ 2.877980] usbcore: registered new interface driver usb-storage [ 2.883883] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.890170] mousedev: PS/2 mouse device common for all mice [ 2.894893] usbcore: registered new interface driver xpad [ 2.903217] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.905854] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.913664] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.920240] i2c /dev entries driver [ 2.923593] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.929434] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.934443] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.939853] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.945133] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.950923] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.956355] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.970219] device-mapper: uevent: version 1.0.3 [ 2.970738] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.976549] cpuidle: Initializing cpuidle driver [ 2.980685] sdhci: Secure Digital Host Controller Interface driver [ 2.985476] sdhci: Copyright(c) Pierre Ossman [ 2.989318] Synopsys Designware Multimedia Card Interface Driver [ 2.995514] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.001520] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.002414] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.015092] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.036804] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.046209] vdd-1v0: supplied by regulator-dummy [ 3.051718] vdd-1v8-hs: supplied by regulator-dummy [ 3.056490] vdd-1v8-ls: supplied by regulator-dummy [ 3.061352] vdd-1v8-ao: supplied by regulator-dummy [ 3.065262] vddio-ddr-1v1: supplied by regulator-dummy [ 3.069849] vdd-rtc: supplied by regulator-dummy [ 3.071681] spmic-ldo1: supplied by regulator-dummy [ 3.072946] vdd-ao-3v3: supplied by regulator-dummy [ 3.079119] vddio-emmc-3v3: supplied by regulator-dummy [ 3.085483] spmic-ldo4: supplied by regulator-dummy [ 3.086734] vdd-usb-3v3: supplied by regulator-dummy [ 3.092917] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.099159] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.104712] spmic-ldo8: supplied by vdd-1v8-ls [ 3.106224] gpio-510 (gpio_default): hogged as output/high [ 3.107621] gpio-511 (gpio_default): hogged as output/high [ 3.110528] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.247672] max77686-rtc max77620-rtc: registered as rtc0 [ 3.248713] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.249036] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 4.098551] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.099851] hid: raw HID events driver (C) Jiri Kosina [ 4.100720] usbcore: registered new interface driver usbhid [ 4.100868] usbhid: USB HID core driver [ 4.103409] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.104653] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 26.874352] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.948544] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.002 ms) 墁 4.188477] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.189125] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.190289] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.191243] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.192974] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.193753] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.194405] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.195736] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.196108] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.197880] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.204787] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.211002] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.216388] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.223105] denver_knobs_init:MTS_VERSION:55637613 [ 4.234997] t19x_cache tegra-cache: probed [ 4.238865] optee: probing for conduit method. [ 4.239753] optee: revision 3.16 (65cc2218) [ 4.240684] optee: dynamic shared memory is enabled [ 4.243415] optee: initialized driver [ 4.250009] nvpmodel: initialized successfully [ 4.251384] tegra_hv: get_hvd: not initialized yet [ 4.255651] user_ivc_mempool: hypervisor not present [ 4.261935] usbcore: registered new interface driver snd-usb-audio [ 4.268022] u32 classifier [ 4.269381] input device check on [ 4.273121] Actions configured [ 4.277089] Initializing XFRM netlink socket [ 4.281853] NET: Registered protocol family 10 [ 4.289012] Segment Routing with IPv6 [ 4.289310] NET: Registered protocol family 17 [ 4.293361] NET: Registered protocol family 15 [ 4.297956] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.311644] Bluetooth: RFCOMM socket layer initialized [ 4.316023] Bluetooth: RFCOMM ver 1.11 [ 4.320091] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.325680] Bluetooth: HIDP socket layer initialized [ 4.331912] 9pnet: Installing 9P2000 support [ 4.335106] Key type dns_resolver registered [ 4.340740] registered taskstats version 1 [ 4.343809] Loading compiled-in X.509 certificates [ 4.356769] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.359732] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.369732] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.371544] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.380336] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.388456] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.506881] tegra194-pcie 14160000.pcie: Link up [ 4.509787] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.510016] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.510218] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.510453] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.510652] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.511083] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.511518] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.526012] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.526583] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.527249] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.528772] pci 0004:01:00.0: supports D1 D2 [ 4.529052] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.543072] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.543393] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.543751] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.544148] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.544430] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.544632] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.544841] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.549143] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.557356] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.567849] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.572093] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.578099] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.584717] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.594292] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.595607] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.603761] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.612349] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.718791] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.719730] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.719952] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.720108] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.720460] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.720662] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.721057] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.721478] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.737130] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.737513] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.739662] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.740791] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.742267] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.744031] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.744903] pci 0005:00:00.0: Removing from iommu group 7 [ 5.745194] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.777032] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.798045] host1x 13e10000.host1x: initialized [ 5.799559] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.800441] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.801290] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.802027] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.802959] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.803549] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.804296] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.804849] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.811715] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.818637] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.828843] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.835887] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.845813] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.852945] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.862955] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.869739] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.879518] falcon 15340000.vic: Adding to iommu group 17 [ 5.893213] falcon 15340000.vic: initialized [ 5.894011] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.900005] falcon 15380000.nvjpg: initialized [ 5.900618] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.912324] falcon 154c0000.nvenc: initialized [ 5.912834] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.923039] falcon 15a80000.nvenc1: initialized [ 5.923670] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.935574] nvdec 15480000.nvdec: initialized [ 5.936451] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.945664] nvdec 15140000.nvdec1: initialized [ 5.946325] tsec 15500000.tsec: Adding to iommu group 18 [ 5.951929] tsec 15500000.tsec: initialized [ 5.952483] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.959757] tsec 15100000.tsecb: initialized [ 5.963499] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.989492] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.001788] gpio-374 (wifi-enable): hogged as output/high [ 6.002120] gpio-431 (camera-control-output-low): hogged as output/low [ 6.002387] gpio-432 (camera-control-output-low): hogged as output/low [ 6.004210] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.005854] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.006341] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.011026] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.016070] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.022479] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.028075] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.036091] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.043214] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.054397] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.059876] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.066041] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.074921] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.083797] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.091394] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.099108] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.105232] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.114734] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.121132] pva 16000000.pva0: Adding to iommu group 22 [ 6.147338] pva 16000000.pva0: initialized [ 6.152793] pva 16800000.pva1: Adding to iommu group 23 [ 6.163366] pva 16800000.pva1: initialized [ 6.169013] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.182493] nvdla 15880000.nvdla0: initialized [ 6.184118] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.192869] nvdla 158c0000.nvdla1: initialized [ 6.195185] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.195463] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.195762] tegradccommon 15200000.display-hub: dma mapping done [ 6.197275] tegradc 15200000.display: Adding to iommu group 26 [ 6.204973] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.205374] generic_infoframe_type: 0x87 [ 6.205614] tegradc 15200000.display: DT parsed successfully [ 6.205931] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.210416] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.211706] tegradc 15210000.display: Adding to iommu group 26 [ 6.217087] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.217671] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.235336] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.240661] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.241033] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.248722] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.248746] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.254289] tegra_cec 3960000.tegra_cec: probed [ 6.255046] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.275609] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.283049] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.287100] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.300156] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.300399] kfuse 3830000.kfuse: initialized [ 6.315716] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.321255] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.322194] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.328318] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.341215] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.341930] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.350643] tegradc 15210000.display: disp0 connected to head1->sor [ 6.358215] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.363698] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.369717] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.376336] tegradc 15210000.display: DT parsed successfully [ 6.386293] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.390357] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.404775] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.424581] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.424973] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.428127] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.436296] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.444998] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.451659] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.459325] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.466682] usb usb1: Product: xHCI Host Controller [ 6.471273] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.477570] usb usb1: SerialNumber: 3610000.xhci [ 6.483193] hub 1-0:1.0: USB hub found [ 6.486119] hub 1-0:1.0: 4 ports detected [ 6.490874] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.495542] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.503406] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.511270] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.518979] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.525958] usb usb2: Product: xHCI Host Controller [ 6.531198] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.537440] usb usb2: SerialNumber: 3610000.xhci [ 6.542652] hub 2-0:1.0: USB hub found [ 6.545647] hub 2-0:1.0: 4 ports detected [ 6.585616] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.591237] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.592536] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.592764] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.605865] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.606903] tegra194-cpufreq ccplex: probed with BWMGR [ 6.608264] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.609045] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.609536] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.610924] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.621556] mmc0: CQHCI version 5.10 [ 6.622668] tegra194-vi5 15c10000.vi: initialized [ 6.624311] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.625534] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.629743] generic_infoframe_type: 0x87 [ 6.636209] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.639671] tegradc 15200000.display: DT parsed successfully [ 6.648037] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.653572] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.660139] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.674790] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.681011] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.688326] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.694764] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.695753] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.702376] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.710768] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.717178] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.732907] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.733782] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.738514] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.738586] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.738858] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.742740] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.754153] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.770304] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.777198] nvethernet 2490000.ethernet: Macsec not supported [ 6.799313] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.808440] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.808443] ************************************** [ 6.808446] CPU:0, Error:cbb-noc [ 6.808449] Error Logger : 0 [ 6.808457] ErrLog0 : 0x80030000 [ 6.808460] Transaction Type : RD - Read, Incrementing [ 6.808463] Error Code : SLV [ 6.808465] Error Source : Target [ 6.808468] Error Description : Target error detected by CBB slave [ 6.808477] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.808482] Packet header Lock : 0 [ 6.808484] Packet header Len1 : 3 [ 6.808487] NOC protocol version : version >= 2.7 [ 6.808490] ErrLog1 : 0x352422 [ 6.808492] ErrLog2 : 0x0 [ 6.808495] RouteId : 0x352422 [ 6.808497] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.808500] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.808502] TargSubRange : 18 [ 6.808505] SeqId : 0 [ 6.808507] ErrLog3 : 0x4045c [ 6.808510] ErrLog4 : 0x0 [ 6.808514] Address accessed : 0x15b4045c [ 6.808516] ErrLog5 : 0x889f851 [ 6.808519] Non-Modify : 0x1 [ 6.808521] AXI ID : 0x11 [ 6.808524] Master ID : CCPLEX [ 6.808527] Security Group(GRPSEC): 0x7e [ 6.808530] Cache : 0x1 -- Bufferable [ 6.808533] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.808536] FALCONSEC : 0x0 [ 6.808538] Virtual Queuing Channel(VQC): 0x0 [ 6.808542] ************************************** [ 6.808580] ------------[ cut here ]------------ [ 6.808583] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.808588] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.808592] Modules linked in: [ 6.808601] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 6.808604] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.808612] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.808623] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.808627] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.808629] sp : ffff800010003b30 [ 6.808637] x29: ffff800010003b30 x28: 0000000000000001 [ 6.808648] x27: 0000000000000005 x26: ffffb7fa2fc53f58 [ 6.808655] x25: ffffb7fa305ace10 x24: 0000000000000001 [ 6.808662] x23: ffffb7fa2ff47000 x22: ffffb7fa303cea00 [ 6.808668] x21: 000000000000000f x20: ffff45d9c0e66980 [ 6.808690] x19: ffffb7fa303cea00 x18: 0000000000000020 [ 6.808696] x17: 0000000000000007 x16: 000000000000000e [ 6.808703] x15: ffff45d9c0166af0 x14: ffffffffffffffff [ 6.808709] x13: ffffb7fa3055ade8 x12: ffffb7fa3055aa2d [ 6.808716] x11: 0000000000000038 x10: 0101010101010101 [ 6.808725] x9 : ffff800010003a40 x8 : 2a2a2a2a2a2a2a2a [ 6.808733] x7 : 2a2a2a2a2a2a2a2a x6 : 000000002a68ef34 [ 6.808742] x5 : 000000000000000c x4 : 00000000fffff2a4 [ 6.808748] x3 : 00000000ffffffff x2 : ffffb7fa2e6ee090 [ 6.808755] x1 : ffff45d9c0166580 x0 : 0000000100010101 [ 6.808762] Call trace: [ 6.808767] tegra194_cbb_err_isr+0x190/0x1b0 [ 6.808775] __handle_irq_event_percpu+0x68/0x2a0 [ 6.808780] handle_irq_event_percpu+0x40/0xa0 [ 6.808785] handle_irq_event+0x50/0xf0 [ 6.808790] handle_fasteoi_irq+0xc0/0x170 [ 6.808796] generic_handle_irq+0x40/0x60 [ 6.808800] __handle_domain_irq+0x70/0xd0 [ 6.808806] efi_header_end+0xb0/0xf0 [ 6.808810] el1_irq+0xd0/0x180 [ 6.808814] __do_softirq+0xb4/0x3e8 [ 6.808820] irq_exit+0xc0/0xe0 [ 6.808825] __handle_domain_irq+0x74/0xd0 [ 6.808829] efi_header_end+0xb0/0xf0 [ 6.808833] el1_irq+0xd0/0x180 [ 6.808838] console_unlock+0x36c/0x540 [ 6.808842] vprintk_emit+0x124/0x2a0 [ 6.808850] dev_vprintk_emit+0x154/0x184 [ 6.808855] dev_printk_emit+0x80/0xa8 [ 6.808859] __dev_printk+0x7c/0xa4 [ 6.808864] _dev_info+0x74/0x9c [ 6.808872] ether_probe+0x1fd4/0x24b0 [ 6.808877] platform_drv_probe+0x5c/0xb0 [ 6.808884] really_probe+0xf8/0x3d0 [ 6.808889] driver_probe_device+0x60/0xc0 [ 6.808893] device_driver_attach+0x78/0x80 [ 6.808898] __driver_attach+0x68/0xf0 [ 6.808903] bus_for_each_dev+0x84/0xe0 [ 6.808907] driver_attach+0x34/0x40 [ 6.808912] bus_add_driver+0x150/0x1f0 [ 6.808916] driver_register+0x68/0x120 [ 6.808920] __platform_driver_register+0x64/0x70 [ 6.808927] nvethernet_driver_init+0x24/0x2c [ 6.808932] do_one_initcall+0x50/0x2f0 [ 6.808939] kernel_init_freeable+0x254/0x2d4 [ 6.808944] kernel_init+0x1c/0x118 [ 6.808949] ret_from_fork+0x10/0x24 [ 6.808961] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 6.808971] ---[ end trace 160f120851d8f6e4 ]--- [ 6.808975] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 6.808978] SMP: stopping secondary CPUs [ 6.809007] Kernel Offset: 0x37fa1e530000 from 0xffff800010000000 [ 6.809009] PHYS_OFFSET: 0xffffba2740000000 [ 6.809014] CPU features: 0x8240002,03802a30 [ 6.809016] Memory Limit: none [ 7.260749] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 73000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.928] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.939] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.961] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.305] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.340] W> Cannot find any partition table for 00000003 [0001.341] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.029] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨歊lk_early initialized ?TC:滵ail_early initialized ?N殞use initialized hwwdt initialized 鄤n-s漮194_ec_get_ec_list: found 45 ecs 輑cure exter歋c initialized vmon_setup_monitors: found 3 monitors vmon initialized 鄚al 榥dc initialized fmon_populate_monitors: found 73 monitors 覡T found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug歊lk_dt_late initialized noc_late initialized ?漥m_post initialized dbells initialized ?1 歍mce initialized ?歊vc initialized ?:23:20 UTC 榥vfs_clk_mach_post initialized ?022 榥vfs_clk_platform_post initialized 跾a歊vc_late initialized regulator_post initialized 酺ch64漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ? I/TC: WARNING漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ? This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.610] E> invalid display type [0003.611] E> cannot find any other nvdisp nodes [0003.628] I> edid read success [0003.640] I> edid read success [0003.640] I> width = 640, height = 480, frequency = 25174825 [0003.641] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.642] I> width = 1360, height = 768, frequency = 85500000 [0003.642] I> width = 720, height = 480, frequency = 26973026 [0003.646] I> width = 720, height = 576, frequency = 26973026 [0003.651] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1920, height = 1080, frequency = 148351648 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.680] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.725] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.740] initializing target [0003.740] calling apps_init() [0003.741] starting app kernel_boot_app [0003.742] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting Recovery Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] printk: bootconsole [tegra_comb_uart0] enabled [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x259442018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259445f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/initrd rw rootwait console=ttyTCU0,115200n8 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6929312K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 479004K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009040] Console: colour dummy device 80x25 [ 0.012626] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022753] pid_max: default: 32768 minimum: 301 [ 0.027487] LSM: Security Framework initializing [ 0.031813] Yama: becoming mindful. [ 0.035458] SELinux: Initializing. [ 0.039474] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.046919] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.057859] rcu: Hierarchical SRCU implementation. [ 0.060040] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.068166] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.085250] DTB Build time: Aug 10 2022 20:31:49 [ 0.092346] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.096853] Remapping and enabling EFI services. [ 0.103119] smp: Bringing up secondary CPUs ... ? Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.198911] Detected PIPT I-cache on CPU1 [ 0.198971] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.228568] Detected PIPT I-cache on CPU2 [ 0.228673] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.258283] Detected PIPT I-cache on CPU3 [ 0.258350] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.288112] Detected PIPT I-cache on CPU4 [ 0.288191] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.317861] Detected PIPT I-cache on CPU5 [ 0.317930] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.318257] smp: Brought up 1 node, 6 CPUs [ 0.319309] SMP: Total of 6 processors activated. [ 0.319407] CPU features: detected: Privileged Access Never [ 0.319503] CPU features: detected: LSE atomic instructions [ 0.319661] CPU features: detected: User Access Override [ 0.320062] CPU features: detected: 32-bit EL0 Support [ 0.320437] CPU features: detected: RAS Extension Support [ 0.320835] CPU features: detected: CRC32 instructions [ 0.321568] CPU features: detected: 32-bit EL1 Support [ 0.395281] CPU: All CPU(s) started at EL2 [ 0.400374] devtmpfs: initialized [ 0.449015] Registered cp15_barrier emulation handler [ 0.449236] Registered setend emulation handler [ 0.449329] KASLR enabled [ 0.449587] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.449761] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.450888] pinctrl core: initialized pinctrl subsystem [ 0.452016] SMBIOS 3.0.0 present. [ 0.452119] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.452968] NET: Registered protocol family 16 [ 0.454931] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.455593] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.456423] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.456636] audit: initializing netlink subsys (disabled) [ 0.457021] audit: type=2000 audit(0.400:1): state=initialized audit_enabled=0 res=1 [ 0.457390] thermal_sys: Registered thermal governor 'step_wise' [ 0.457396] thermal_sys: Registered thermal governor 'power_allocator' [ 0.457544] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.462263] cpuidle: using governor menu [ 0.470912] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.477700] ASID allocator initialised with 32768 entries [ 0.483076] Serial: AMBA PL011 UART driver [ 0.490145] Tegra reboot handler registered. [ 0.556487] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.556724] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.557041] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.557247] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.557560] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.557741] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.558003] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.558179] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.558463] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.558630] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.562530] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.566789] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.573262] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.579728] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.585961] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.592770] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.599071] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.605800] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.612364] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.618835] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.625314] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.631786] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.638175] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.644584] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.650954] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.657340] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.663741] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.670199] mc-err: mcerr ops are set to t19x [ 0.686225] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.686375] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.687670] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.694118] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.709223] ACPI: Interpreter disabled. [ 0.710953] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.712934] iommu: Default domain type: Translated [ 0.714340] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.720726] SCSI subsystem initialized [ 0.724436] usbcore: registered new interface driver usbfs [ 0.729565] usbcore: registered new interface driver hub [ 0.734818] usbcore: registered new device driver usb [ 0.740680] mc: Linux media interface: v0.10 [ 0.744506] videodev: Linux video capture interface: v2.00 [ 0.750084] pps_core: LinuxPPS API ver. 1 registered [ 0.754802] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.763922] PTP clock support registered [ 0.768040] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.774632] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.781783] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.788604] Registered efivars operations [ 0.799861] FPGA manager framework [ 0.800063] Advanced Linux Sound Architecture Driver Initialized. [ 0.802421] Bluetooth: Core ver 2.22 [ 0.805315] NET: Registered protocol family 31 [ 0.809579] Bluetooth: HCI device and connection manager initialized [ 0.815967] Bluetooth: HCI socket layer initialized [ 0.820956] Bluetooth: L2CAP socket layer initialized [ 0.825996] Bluetooth: SCO socket layer initialized [ 0.833015] camchar: rtcpu character device driver loaded [ 0.839097] clocksource: Switched to clocksource arch_sys_counter [ 1.243913] VFS: Disk quotas dquot_6.6.0 [ 1.244075] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.244600] pnp: PnP ACPI: disabled [ 1.258053] la/ptsa driver initialized. [ 1.258302] NET: Registered protocol family 2 [ 1.258556] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.266246] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.266577] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.267080] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.267810] TCP: Hash tables configured (established 65536 bind 65536) [ 1.268074] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.268356] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.268784] NET: Registered protocol family 1 [ 1.269672] RPC: Registered named UNIX socket transport module. [ 1.269823] RPC: Registered udp transport module. [ 1.269906] RPC: Registered tcp transport module. [ 1.270008] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.270152] PCI: CLS 0 bytes, default 64 [ 1.270425] Trying to unpack rootfs image as initramfs... [ 1.545428] Freeing initrd memory: 11876K [ 1.548803] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.548953] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.549096] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.549461] kvm [1]: IPA Size Limit: 40 bits [ 1.549959] kvm [1]: vgic interrupt IRQ9 [ 1.550523] kvm [1]: VHE mode initialized successfully [ 1.551747] Initialise system trusted keyrings [ 1.552139] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.556320] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.557080] NFS: Registering the id_resolver key type [ 1.557183] Key type id_resolver registered [ 1.557287] Key type id_legacy registered [ 1.557434] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.557574] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.557731] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.565571] NET: Registered protocol family 38 [ 1.565695] Key type asymmetric registered [ 1.565793] Asymmetric key parser 'x509' registered [ 1.565939] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.566269] io scheduler mq-deadline registered [ 1.566351] io scheduler kyber registered [ 1.573491] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.578133] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.581695] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.587269] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.593040] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.598730] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.608230] scrncapt: init (heads:4 wins:6 planes:4) [ 1.608314] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.610134] EINJ: ACPI disabled. [ 1.621619] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.626344] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.631238] tegra-pmc: ### PMC reset level: L1 [ 1.635519] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.640539] tegra-pmc: PMC Prod config success [ 1.648457] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.653128] printk: console [ttyTCU0] enabled [ 1.653128] printk: console [ttyTCU0] enabled 1.659531] printk: bootconsole [tegra_comb_uart0] disabled [ 1.659531] printk: bootconsole [tegra_comb_uart0] disabled [ 1.671344] arm-smmu 10000000.iommu: probing hardware configuration... [ 1.677009] arm-smmu 10000000.iommu: SMMUv2 with: [ 1.681770] arm-smmu 10000000.iommu: stage 1 translation [ 1.687430] arm-smmu 10000000.iommu: stage 2 translation [ 1.692410] arm-smmu 10000000.iommu: nested translation [ 1.698175] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 1.705523] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 1.714697] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 1.718919] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.725125] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.732495] arm-smmu 12000000.iommu: probing hardware configuration... [ 1.738074] arm-smmu 12000000.iommu: SMMUv2 with: [ 1.742808] arm-smmu 12000000.iommu: stage 1 translation [ 1.748054] arm-smmu 12000000.iommu: stage 2 translation [ 1.753474] arm-smmu 12000000.iommu: nested translation [ 1.759162] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 1.766338] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 1.766847] random: fast init done [ 1.775320] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 1.782880] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.789183] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.796708] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 1.806433] tegra_profiler: version: 1.147, samples/io: 49/28 [ 1.809846] tegra_profiler: auth: init [ 1.813951] THERMAL EST: found 3 subdevs [ 1.817441] THERMAL EST num_resources: 0 [ 1.821024] [THERMAL EST subdev 0] [ 1.824693] [THERMAL EST subdev 1] [ 1.827673] [THERMAL EST subdev 2] [ 1.831355] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.837478] THERMAL EST: thz register success. [ 1.841873] THERMAL EST: end of probe, return err: 0 [ 1.847086] nvsciipc: loaded module [ 1.853283] tun: Universal TUN/TAP device driver, 1.6 [ 1.856683] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.862861] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.868663] e1000e: Intel(R) PRO/1000 Network Driver [ 1.873349] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.879682] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.884722] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.890850] PPP generic driver version 2.4.2 [ 1.895148] PPP BSD Compression module registered [ 1.899695] PPP Deflate Compression module registered [ 1.905201] PPP MPPE Compression module registered [ 1.909959] usbcore: registered new interface driver r8152 [ 1.915732] usbcore: registered new interface driver asix [ 1.920801] usbcore: registered new interface driver ax88179_178a [ 1.926928] usbcore: registered new interface driver cdc_ether [ 1.933147] usbcore: registered new interface driver net1080 [ 1.938745] usbcore: registered new interface driver cdc_subset [ 1.944540] usbcore: registered new interface driver zaurus [ 1.950462] usbcore: registered new interface driver cdc_ncm [ 1.956157] usbcore: registered new interface driver aqc111 [ 1.961787] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.967861] ohci-pci: OHCI PCI platform driver [ 1.971925] ohci-platform: OHCI generic platform driver [ 1.977738] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 1.984280] usbcore: registered new interface driver uas [ 1.988195] usbcore: registered new interface driver usb-storage [ 1.994521] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.000202] mousedev: PS/2 mouse device common for all mice [ 2.005362] usbcore: registered new interface driver xpad [ 2.013586] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.016149] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.023882] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.030361] i2c /dev entries driver [ 2.034015] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.039447] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.044801] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.050483] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.055552] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.061294] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.066462] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.078052] device-mapper: uevent: version 1.0.3 [ 2.078392] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.086754] cpuidle: Initializing cpuidle driver [ 2.090943] sdhci: Secure Digital Host Controller Interface driver [ 2.095704] sdhci: Copyright(c) Pierre Ossman [ 2.100058] Synopsys Designware Multimedia Card Interface Driver [ 2.105981] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.111855] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.112430] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.125039] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.142811] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.151918] vdd-1v0: supplied by regulator-dummy [ 2.157262] vdd-1v8-hs: supplied by regulator-dummy [ 2.161910] vdd-1v8-ls: supplied by regulator-dummy [ 2.166757] vdd-1v8-ao: supplied by regulator-dummy [ 2.170590] vddio-ddr-1v1: supplied by regulator-dummy [ 2.174970] vdd-rtc: supplied by regulator-dummy [ 2.176639] spmic-ldo1: supplied by regulator-dummy [ 2.177769] vdd-ao-3v3: supplied by regulator-dummy [ 2.183836] vddio-emmc-3v3: supplied by regulator-dummy [ 2.189908] spmic-ldo4: supplied by regulator-dummy [ 2.191077] vdd-usb-3v3: supplied by regulator-dummy [ 2.197222] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 2.203266] vdd-csi-1v2: supplied by vdd-1v8-ls [ 2.208688] spmic-ldo8: supplied by vdd-1v8-ls [ 2.210085] gpio-510 (gpio_default): hogged as output/high [ 2.212245] gpio-511 (gpio_default): hogged as output/high [ 2.218844] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 2.357793] max77686-rtc max77620-rtc: registered as rtc0 [ 2.359096] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 2.359403] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 3.117186] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.118078] hid: raw HID events driver (C) Jiri Kosina [ 3.118730] usbcore: registered new interface driver usbhid [ 3.118884] usbhid: USB HID core driver [ 3.120733] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.121845] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 26.068220] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.143863] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.453 ms) 墁 3.207185] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.207767] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.208666] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.209256] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.210827] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.211504] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.212064] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.213533] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.213784] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.215701] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.223358] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.229646] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.234566] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.241386] denver_knobs_init:MTS_VERSION:55637613 [ 3.253274] t19x_cache tegra-cache: probed [ 3.255871] optee: probing for conduit method. [ 3.256662] optee: revision 3.16 (65cc2218) [ 3.257818] optee: dynamic shared memory is enabled [ 3.262282] optee: initialized driver [ 3.269089] nvpmodel: initialized successfully [ 3.269953] tegra_hv: get_hvd: not initialized yet [ 3.274654] user_ivc_mempool: hypervisor not present [ 3.280541] usbcore: registered new interface driver snd-usb-audio [ 3.287426] u32 classifier [ 3.288371] input device check on [ 3.292232] Actions configured [ 3.295473] Initializing XFRM netlink socket [ 3.300421] NET: Registered protocol family 10 [ 3.306653] Segment Routing with IPv6 [ 3.307756] NET: Registered protocol family 17 [ 3.312233] NET: Registered protocol family 15 [ 3.316401] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.329986] Bluetooth: RFCOMM socket layer initialized [ 3.334676] Bluetooth: RFCOMM ver 1.11 [ 3.338824] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.344428] Bluetooth: HIDP socket layer initialized [ 3.350388] 9pnet: Installing 9P2000 support [ 3.354111] Key type dns_resolver registered [ 3.359256] registered taskstats version 1 [ 3.362266] Loading compiled-in X.509 certificates [ 3.375364] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 3.378324] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 3.388225] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 3.390460] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 3.398836] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 3.407548] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 3.523060] tegra194-pcie 14160000.pcie: Link up [ 3.525796] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 3.525973] pci_bus 0004:00: root bus resource [bus 00-ff] [ 3.526105] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 3.526325] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 3.526498] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 3.526818] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 3.527290] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 3.538475] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 3.538922] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.539732] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 3.541176] pci 0004:01:00.0: supports D1 D2 [ 3.541352] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.563020] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 3.563675] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 3.563909] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 3.564316] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.564583] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 3.564782] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 3.564965] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 3.565220] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 3.573520] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 3.584442] pcieport 0004:00:00.0: Adding to iommu group 6 [ 3.588470] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 3.594375] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 3.600834] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 3.609892] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 3.611777] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 3.619918] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.628643] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 4.731232] tegra194-pcie 141a0000.pcie: Phy link never came up [ 4.731907] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 4.732115] pci_bus 0005:00: root bus resource [bus 00-ff] [ 4.732258] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 4.732555] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 4.732744] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 4.733131] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 4.733528] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 4.750292] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 4.750563] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 4.752510] pcieport 0005:00:00.0: Adding to iommu group 7 [ 4.753652] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 4.755334] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 4.756563] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 4.757590] pci 0005:00:00.0: Removing from iommu group 7 [ 4.757867] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 4.787975] host1x 13e10000.host1x: Adding to iommu group 8 [ 4.809250] host1x 13e10000.host1x: initialized [ 4.810882] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 4.811893] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 4.812893] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 4.813474] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 4.814463] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 4.815164] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 4.816104] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 4.816638] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 4.824437] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 4.831226] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 4.841193] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 4.848487] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 4.858504] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 4.865095] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 4.875217] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 4.882039] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 4.892244] falcon 15340000.vic: Adding to iommu group 17 [ 4.906017] falcon 15340000.vic: initialized [ 4.906835] falcon 15380000.nvjpg: Adding to iommu group 17 [ 4.912817] falcon 15380000.nvjpg: initialized [ 4.913470] falcon 154c0000.nvenc: Adding to iommu group 17 [ 4.925288] falcon 154c0000.nvenc: initialized [ 4.925851] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 4.934950] falcon 15a80000.nvenc1: initialized [ 4.935670] nvdec 15480000.nvdec: Adding to iommu group 17 [ 4.947948] nvdec 15480000.nvdec: initialized [ 4.948560] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 4.958321] nvdec 15140000.nvdec1: initialized [ 4.958880] tsec 15500000.tsec: Adding to iommu group 18 [ 4.964726] tsec 15500000.tsec: initialized [ 4.965289] tsec 15100000.tsecb: Adding to iommu group 19 [ 4.972014] tsec 15100000.tsecb: initialized [ 4.975609] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.001584] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.013013] gpio-374 (wifi-enable): hogged as output/high [ 5.013255] gpio-431 (camera-control-output-low): hogged as output/low [ 5.013575] gpio-432 (camera-control-output-low): hogged as output/low [ 5.015073] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.016548] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.017178] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.023450] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.028741] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.034264] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.040146] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.048045] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.055620] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.066855] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.072341] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.078254] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.087115] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.096579] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.103966] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.111468] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.117560] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.127612] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.133761] pva 16000000.pva0: Adding to iommu group 22 [ 5.161814] pva 16000000.pva0: initialized [ 5.167363] pva 16800000.pva1: Adding to iommu group 23 [ 5.186557] pva 16800000.pva1: initialized [ 5.192049] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.205283] nvdla 15880000.nvdla0: initialized [ 5.206475] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.215287] nvdla 158c0000.nvdla1: initialized [ 5.217796] tegradc 15200000.display: Adding to iommu group 26 [ 5.225527] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.225905] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.227690] tegradc 15210000.display: Adding to iommu group 26 [ 5.228671] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.229357] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.229495] tegra_cec 3960000.tegra_cec: probed [ 5.230364] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 5.230892] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.231920] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.232120] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.232768] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 5.238954] tegradccommon 15200000.display-hub: dma mapping done [ 5.245844] kfuse 3830000.kfuse: initialized [ 5.256811] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.262602] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.269225] serial-tegra 3100000.serial: Adding to iommu group 2 [ 5.276055] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 5.285500] serial-tegra 3110000.serial: Adding to iommu group 2 [ 5.290489] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 5.299546] serial-tegra 3140000.serial: Adding to iommu group 2 [ 5.305020] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 5.326076] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 5.326393] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.328502] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 5.336425] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 5.345368] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 5.351623] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.359531] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.366640] usb usb1: Product: xHCI Host Controller [ 5.371343] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.377641] usb usb1: SerialNumber: 3610000.xhci [ 5.383512] hub 1-0:1.0: USB hub found [ 5.386204] hub 1-0:1.0: 4 ports detected [ 5.390857] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.395886] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 5.403219] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 5.410932] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 5.419065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.426293] usb usb2: Product: xHCI Host Controller [ 5.431046] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.437233] usb usb2: SerialNumber: 3610000.xhci [ 5.442902] hub 2-0:1.0: USB hub found [ 5.446118] hub 2-0:1.0: 4 ports detected [ 5.486967] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 5.492425] i2c i2c-2: Added multiplexed i2c bus 9 [ 5.493784] i2c i2c-2: Added multiplexed i2c bus 10 [ 5.493967] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 5.507214] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 5.508355] tegra194-cpufreq ccplex: probed with BWMGR [ 5.509668] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 5.510254] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 5.510742] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 5.511972] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 5.520959] tegra194-vi5 15c10000.vi: initialized [ 5.522471] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.523877] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 5.525961] generic_infoframe_type: 0x87 [ 5.532923] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 5.536317] mmc0: CQHCI version 5.10 [ 5.539114] tegradc 15200000.display: DT parsed successfully [ 5.539147] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 5.544240] nvethernet 2490000.ethernet: failed to read MDIO address [ 5.568190] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 5.569181] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.574770] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 5.574776] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 5.583087] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 5.583162] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 5.589735] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 5.593773] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 5.595850] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 5.596214] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 5.602511] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 5.610487] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 5.618909] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 5.625688] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 5.640313] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 5.645828] nvethernet 2490000.ethernet: Macsec not supported [ 5.647192] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 5.651941] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 5.654086] tegradc 15200000.display: probed [ 5.660964] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 5.680625] mmc0: Command Queue Engine enabled [ 5.683697] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 5.691481] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 5.691677] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.691919] mmc0: periodic cache flush enabled [ 5.700751] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 5.704114] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.704697] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 5.711774] tegra-se-nvhost 15810000.se: initialized [ 5.714335] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 5.732901] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 5.734762] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 5.739854] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 5.745666] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 5.793630] Console: switching to colour frame buffer device 240x67 [ 5.793994] tegra-se-nvhost 15820000.se: initialized [ 5.799483] tegradc 15200000.display: fb registered [ 5.805434] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 5.806106] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 5.806671] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 5.807373] tegra-se-nvhost 15830000.se: initialized [ 5.808437] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 5.808989] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 5.809415] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 5.809637] tegra-se-nvhost 15840000.se: initialized [ 5.811236] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 5.812784] tegra_actmon d230000.actmon: in actmon_register()... [ 5.812945] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 5.813284] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 5.813843] hvc_sysfs: hypervisor is not present [ 5.843340] ALSA device list: [ 5.848701] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.852174] No soundcards found. [ 5.857338] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.866753] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 5.914125] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.914137] usb 1-2: Product: 4-Port USB 2.0 Hub [ 5.914142] usb 1-2: Manufacturer: Generic [ 5.916251] hub 1-2:1.0: USB hub found [ 5.929328] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 5.931404] hub 1-2:1.0: 4 ports detected [ 5.935530] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 5.955220] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 5.963726] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 5.970287] Extcon AUX1(HDMI) enable [ 5.973930] tegradc 15210000.display: disp1 connected to head1->sor [ 5.980339] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 5.987484] tegradc 15210000.display: DT parsed successfully [ 5.987924] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 5.992723] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.008567] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.014455] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.027606] tegradc 15210000.display: probed [ 6.027950] tegradc 15210000.display: fb registered [ 6.033412] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.037243] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.039134] Freeing unused kernel memory: 3968K [ 6.045186] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.055411] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.063240] Run /init as init process [ 6.063689] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.074633] tegradc 15210000.display: blank - powerdown [ 6.079553] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.079559] usb 2-3: Manufacturer: Generic [ 6.088271] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.096391] Extcon DP: HPD disabled [ 6.100335] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.107070] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.112818] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.126515] hub 2-3:1.0: USB hub found [ 6.128500] hub 2-3:1.0: 4 ports detected [ 6.129143] Root device found: initrd [ 6.132740] Mount initrd as rootfs and enter recovery mode Finding OTA work dir on external storage devices Checking whether device /dev/mmcblk?p1 exist Looking for OTA work directory on the device(s): /dev/mmcblk0p1 Checking whether device /dev/sd?1 exist Device /dev/sd?1 does not exist Checking whether device /dev/nvme?n1p1 exist Device /dev/nvme?n1p1 does not exist Finding OTA work dir on internal storage device 榳ARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk 嘓TA work directory /mnt/ota_work is not found on /dev/mmcblk0p1 [ 6.137083] tegradc 15200000.display: blank - powerdown [ 6.155096] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.179760] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.179766] Extcon AUX1(HDMI) disable [ 6.203297] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.204156] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.216161] tegradc 15200000.display: unblank [ 6.217382] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.217575] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.223837] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.225671] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.229662] extcon-disp-state external-connecOTA work tion:ddirectisp-st isate: c not foun7 sntee 1 nd ext[ ernal 6.22rag966eviExtcon AUX1(HDMI) enable [ 6.237329] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) bash: [ 6cannot.24 se1] t termtegradc 1520rocess0000.disp grlayoupync1):ndows appropret = 247ioctl for de[ vic 6.255087] tegra_cecbas 39h: 600no 00.teg contrcec: physthiicas sl ahelddrless: 10:00. [ 6.28bas826h-5ext.0# sp-state external-connection:disp-state: cable 53 state 1 [ 6.295796] Extcon HDMI: HPD enabled [ 6.299702] tegradc 15200000.display: hdmi: plugged [ 6.308272] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 6.312764] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.320183] usb 1-3: Product: Bluetooth Radio [ 6.324549] usb 1-3: Manufacturer: Realtek [ 6.328663] usb 1-3: SerialNumber: 00e04c000001 [ 6.340772] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 6.340977] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 35.919071] vdd-1v8-sd: disabling [ 35.919218] vdd-3v3-cvb: disabling [ 35.919324] vdd-1v8-cvb: disabling [ 35.919405] vdd-epb-1v0: disabling [ 35.919486] vdd-fan: disabling [ 35.919557] vdd_sys_en: disabling [ 42.008997] random: crng init done ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x0, rst_level: 0x0 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.108] I> Temperature = 55000 [0000.111] W> Skipping boost for clk: BPMP_CPU_NIC [0000.115] W> Skipping boost for clk: BPMP_APB [0000.119] W> Skipping boost for clk: AXI_CBB [0000.123] W> Skipping boost for clk: AON_CPU_NIC [0000.127] W> Skipping boost for clk: CAN1 [0000.131] W> Skipping boost for clk: CAN2 [0000.135] I> Boot-device: QSPI (instance: 0) [0000.139] I> Qspi flash params source = mb1bct [0000.143] I> Qspi clock source : pllc_out0 [0000.147] I> Qspi-0 reinitialized [0000.150] I> Qspi flash params source = mb1bct [0000.163] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.170] W> Thermal config not found in BCT [0000.178] W> MEMIO rail config not found in BCT [0000.188] I> Qspi flash params source = mb1bct [0000.202] I> Qspi flash params source = mb1bct [0000.236] I> Qspi flash params source = mb1bct [0000.800] I> Qspi flash params source = mb1bct [0000.817] I> Qspi flash params source = mb1bct [0000.856] W> Platform config not found in BCT [0000.883] I> Qspi flash params source = mb1bct [0000.908] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.917] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.918] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.919] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.920] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.925] W> device prod register failed [0000.929] I> gpio framework initialized [0000.933] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.940] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.948] I> No valid sdcard_params in mb1_bct [0000.952] I> Boot_device: QSPI_FLASH instance: 0 [0000.956] I> qspi flash-0 params source = boot args [0000.962] I> QSPI-0l initialized successfully [0000.965] I> sdmmc-3 params source = safe params [0001.365] I> sdmmc DDR50 mode [0001.383] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.400] W> Cannot find any partition table for 00000003 [0001.401] > PARTITION_MANAGER: Failed to publish partition. [0001.417] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.418] I> Active Boot chain : 0 [0002.089] I> Relocating BR-BCT [0002.090] > DEVICE_PROD: device prod is not initialized. [0002.396] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.396] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.397] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.397] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.398] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.398] I> dram_block larger than 80000000 [0002.401] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.412] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.415] I> found decompressor handler: lz4 [0002.644] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.646] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 觨/歊lk_early initialized 賏C: N滵ail_early initialized 鄤殞use initialized hwwdt initialized 鄚-sec漮194_ec_get_ec_list: found 45 ecs 酳re externa歋c initialized vmon_setup_monitors: found 3 monitors vmon initialized 鄟 D榥dc initialized 賏殞mon_populate_monitors: found 73 monitors ?found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 歊lk_dt_late initialized ?滱oc_late initialized pm_post initialized dbells initialized ? 0歍mce initialized ?歊vc initialized ?23:20 UTC 2榥vfs_clk_mach_post initialized ?22 a榥vfs_clk_platform_post initialized 跾r歊vc_late initialized regulator_post initialized 踄h64 漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ?I/TC: WARNIN漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] 觩: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.265] I> Welcome to NVDisp-Init [0003.265] I> NVDisp-Init version: t194-f9ecfedc [0003.266] I> CPU-BL Params @ 0xca020000 [0003.266] I> 0) Base:0x00000000 Size:0x00000000 [0003.266] I> 1) Base:0xc8300000 Size:0x00100000 [0003.267] I> 2) Base:0xc9800000 Size:0x00200000 [0003.267] I> 3) Base:0xc8600000 Size:0x00200000 [0003.270] I> 4) Base:0xc8200000 Size:0x00100000 [0003.274] I> 5) Base:0xc8100000 Size:0x00100000 [0003.278] I> 6) Base:0xc9400000 Size:0x00400000 [0003.283] I> 7) Base:0xc9000000 Size:0x00400000 [0003.287] I> 8) Base:0xc8000000 Size:0x00100000 [0003.292] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.296] I> 10) Base:0xca800000 Size:0x00800000 [0003.301] I> 11) Base:0x40000000 Size:0x00040000 [0003.305] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.310] I> 13) Base:0x40046000 Size:0x00002000 [0003.314] I> 14) Base:0x40048000 Size:0x00002000 [0003.319] I> 15) Base:0xaf000000 Size:0x00004000 [0003.323] I> 16) Base:0x4004a000 Size:0x00002000 [0003.328] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.332] I> 18) Base:0x4004c000 Size:0x00002000 [0003.337] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.341] I> 20) Base:0x4004e000 Size:0x00002000 [0003.345] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.350] I> 22) Base:0x00000000 Size:0x00000000 [0003.354] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.359] I> 24) Base:0xcc000000 Size:0x02000000 [0003.363] I> 25) Base:0x40050000 Size:0x00002000 [0003.368] I> 26) Base:0x40040000 Size:0x00006000 [0003.372] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.377] I> 28) Base:0xc8400000 Size:0x00200000 [0003.381] I> 29) Base:0xc8800000 Size:0x00400000 [0003.386] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.390] I> 31) Base:0x00000000 Size:0x00000000 [0003.395] I> 32) Base:0xf8000000 Size:0x08000000 [0003.399] I> 33) Base:0xce000000 Size:0x2a000000 [0003.403] I> 34) Base:0xcb000000 Size:0x01000000 [0003.408] I> 35) Base:0xae000000 Size:0x01000000 [0003.412] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.417] I> 37) Base:0xca000000 Size:0x00800000 [0003.421] I> 38) Base:0x80000000 Size:0x20000000 [0003.426] I> 39) Base:0xb0000000 Size:0x08000000 [0003.430] I> 40) Base:0x00000000 Size:0x00000000 [0003.435] I> 41) Base:0x00000000 Size:0x00000000 [0003.439] I> 42) Base:0x00000000 Size:0x00000000 [0003.444] I> 43) Base:0x00000000 Size:0x00000000 [0003.448] I> 44) Base:0x00000000 Size:0x00000000 [0003.453] I> 45) Base:0x00000000 Size:0x00000000 [0003.457] GIC-SPI Target CPU: 0 [0003.460] Interrupts Init done [0003.463] calling constructors [0003.466] initializing heap [0003.468] I> Heap: [0xa0960000 ... 0xadf00000] [0003.473] initializing threads [0003.476] initializing timers [0003.478] creating bootstrap completion thread [0003.483] top of bootstrap2() [0003.485] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.490] initializing platform [0003.493] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.498] W> device prod register failed [0003.502] I> Bl_dtb @0xadf00000 [0003.505] I> gpio framework initialized [0003.516] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.522] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.527] I> fixed regulator driver initialized [0003.544] I> register 'maxim' power off handle [0003.546] I> virtual i2c enabled [0003.547] I> registered 'maxim,max20024' pmic [0003.547] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.547] I> Boot-device: QSPI [0003.549] I> Boot_device: QSPI_FLASH instance: 0 [0003.554] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.565] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.572] I> QSPI source rate = 204000 Khz [0003.575] I> Requested rate for QSPI clock = 34000 Khz [0003.580] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.585] I> tx_clk_tap_delay : 0 [0003.588] I> rx_clk_tap_delay : 16 [0003.591] I> QSPI Flash Size = 32 MB [0003.599] I> Qspi initialized successfully [0003.599] I> qspi flash-0 params source = boot args [0003.604] W> No board IDs available [0003.606] E> Failed to get board id info! [0003.612] I> sdmmc-3 params source = safe params [0003.619] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.621] W> Cannot find any partition table for 00000003 [0003.625] E> Failed to publish 00000003 [0003.635] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.652] I> regulator 'vdd-hdmi-5v0' already enabled [0003.660] I> regulator 'vdd-hdmi-5v0' already enabled [0003.660] I> hdmi cable connected [0003.665] W> set volts not configured for 'vdd-1v0' [0003.669] W> set volts not configured for 'vdd-1v8-hs' [0003.669] I> retrieved tmds range from prod_list_hdmi_soc [0003.674] E> invalid display type [0003.675] E> cannot find any other nvdisp nodes [0003.691] I> edid read success [0003.703] I> edid read success [0003.704] I> width = 640, height = 480, frequency = 25174825 [0003.704] I> width = 1920, height = 1080, frequency = 148500000 [0003.705] I> width = 1280, height = 768, frequency = 79500000 [0003.705] I> width = 1360, height = 768, frequency = 85500000 [0003.705] I> width = 720, height = 480, frequency = 26973026 [0003.709] I> width = 720, height = 576, frequency = 26973026 [0003.715] I> width = 1280, height = 720, frequency = 74175824 [0003.720] I> width = 1280, height = 720, frequency = 74175824 [0003.726] I> width = 1920, height = 1080, frequency = 148351648 [0003.732] I> width = 1920, height = 1080, frequency = 148351648 [0003.738] I> width = 720, height = 480, frequency = 26973026 [0003.743] I> width = 720, height = 576, frequency = 26973026 [0003.749] I> width = 3840, height = 2160, frequency = 296703296 [0003.754] I> width = 3840, height = 2160, frequency = 296703296 [0003.760] I> width = 3840, height = 2160, frequency = 296703296 [0003.766] I> width = 3840, height = 2160, frequency = 296703296 [0003.772] I> width = 4096, height = 2160, frequency = 296703296 [0003.777] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.789] I> hdmi_enable, starting HDMI initialisation [0003.794] I> hdmi_enable, HDMI initialisation complete [0003.803] initializing target [0003.804] calling apps_init() [0003.804] starting app kernel_boot_app [0003.805] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting Recovery Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] printk: bootconsole [tegra_comb_uart0] enabled [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x259442018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259445f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/initrd rw rootwait console=ttyTCU0,115200n8 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6929312K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 479004K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008746] Console: colour dummy device 80x25 [ 0.012635] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022773] pid_max: default: 32768 minimum: 301 [ 0.027251] LSM: Security Framework initializing [ 0.032078] Yama: becoming mindful. [ 0.035720] SELinux: Initializing. [ 0.039465] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.046927] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.058135] rcu: Hierarchical SRCU implementation. [ 0.060067] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.068287] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.085019] DTB Build time: Aug 10 2022 20:31:49 [ 0.092742] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.097045] Remapping and enabling EFI services. [ 0.103297] smp: Bringing up secondary CPUs ... ? Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.198786] Detected PIPT I-cache on CPU1 [ 0.198861] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.228473] Detected PIPT I-cache on CPU2 [ 0.228568] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.258224] Detected PIPT I-cache on CPU3 [ 0.258340] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.288017] Detected PIPT I-cache on CPU4 [ 0.288226] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.317953] Detected PIPT I-cache on CPU5 [ 0.318103] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.318397] smp: Brought up 1 node, 6 CPUs [ 0.319474] SMP: Total of 6 processors activated. [ 0.319621] CPU features: detected: Privileged Access Never [ 0.319723] CPU features: detected: LSE atomic instructions [ 0.319817] CPU features: detected: User Access Override [ 0.320203] CPU features: detected: 32-bit EL0 Support [ 0.320572] CPU features: detected: RAS Extension Support [ 0.320963] CPU features: detected: CRC32 instructions [ 0.321711] CPU features: detected: 32-bit EL1 Support [ 0.396313] CPU: All CPU(s) started at EL2 [ 0.402188] devtmpfs: initialized [ 0.453340] Registered cp15_barrier emulation handler [ 0.453553] Registered setend emulation handler [ 0.453642] KASLR enabled [ 0.453919] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.454086] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.455510] pinctrl core: initialized pinctrl subsystem [ 0.456790] SMBIOS 3.0.0 present. [ 0.456895] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.457749] NET: Registered protocol family 16 [ 0.459911] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.460579] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.461478] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.461682] audit: initializing netlink subsys (disabled) [ 0.462066] audit: type=2000 audit(0.404:1): state=initialized audit_enabled=0 res=1 [ 0.462520] thermal_sys: Registered thermal governor 'step_wise' [ 0.462526] thermal_sys: Registered thermal governor 'power_allocator' [ 0.462645] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.468143] cpuidle: using governor menu [ 0.475250] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.482134] ASID allocator initialised with 32768 entries [ 0.487217] Serial: AMBA PL011 UART driver [ 0.495244] Tegra reboot handler registered. [ 0.568649] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.568896] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.569235] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.569442] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.569707] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.569879] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.570155] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.570308] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.570612] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.570794] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.573109] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.573256] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.577576] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.584080] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.590522] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.597084] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.603669] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.609956] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.616691] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.623175] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.629633] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.636119] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.642524] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.648621] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.655287] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.661671] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.668044] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.674595] mc-err: mcerr ops are set to t19x [ 0.692131] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.692266] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.692419] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.698685] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.713638] ACPI: Interpreter disabled. [ 0.714957] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.716368] iommu: Default domain type: Translated [ 0.718726] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.725170] SCSI subsystem initialized [ 0.728610] usbcore: registered new interface driver usbfs [ 0.733869] usbcore: registered new interface driver hub [ 0.739360] usbcore: registered new device driver usb [ 0.744816] mc: Linux media interface: v0.10 [ 0.748807] videodev: Linux video capture interface: v2.00 [ 0.754511] pps_core: LinuxPPS API ver. 1 registered [ 0.759108] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.768215] PTP clock support registered [ 0.772295] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.779112] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.786054] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.792997] Registered efivars operations [ 0.801702] FPGA manager framework [ 0.801889] Advanced Linux Sound Architecture Driver Initialized. [ 0.806307] Bluetooth: Core ver 2.22 [ 0.809608] NET: Registered protocol family 31 [ 0.813887] Bluetooth: HCI device and connection manager initialized [ 0.820031] Bluetooth: HCI socket layer initialized [ 0.825261] Bluetooth: L2CAP socket layer initialized [ 0.830516] Bluetooth: SCO socket layer initialized [ 0.837149] camchar: rtcpu character device driver loaded [ 0.841805] clocksource: Switched to clocksource arch_sys_counter [ 1.122730] VFS: Disk quotas dquot_6.6.0 [ 1.122874] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.123323] pnp: PnP ACPI: disabled [ 1.135909] la/ptsa driver initialized. [ 1.136117] NET: Registered protocol family 2 [ 1.136342] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.142099] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.142359] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.142739] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.143274] TCP: Hash tables configured (established 65536 bind 65536) [ 1.143503] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.143729] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.144090] NET: Registered protocol family 1 [ 1.145065] RPC: Registered named UNIX socket transport module. [ 1.145213] RPC: Registered udp transport module. [ 1.145363] RPC: Registered tcp transport module. [ 1.145466] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.145592] PCI: CLS 0 bytes, default 64 [ 1.146006] Trying to unpack rootfs image as initramfs... [ 1.521533] Freeing initrd memory: 11876K [ 1.526010] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.526162] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.526291] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.526671] kvm [1]: IPA Size Limit: 40 bits [ 1.527257] kvm [1]: vgic interrupt IRQ9 [ 1.527801] kvm [1]: VHE mode initialized successfully [ 1.529342] Initialise system trusted keyrings [ 1.529759] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.535981] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.536860] NFS: Registering the id_resolver key type [ 1.536995] Key type id_resolver registered [ 1.537087] Key type id_legacy registered [ 1.537267] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.537411] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.537597] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.547536] NET: Registered protocol family 38 [ 1.547640] Key type asymmetric registered [ 1.547741] Asymmetric key parser 'x509' registered [ 1.547869] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.548328] io scheduler mq-deadline registered [ 1.548417] io scheduler kyber registered [ 1.554072] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.557139] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.558075] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.563935] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.569763] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.575329] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.586225] scrncapt: init (heads:4 wins:6 planes:4) [ 1.586328] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.593603] EINJ: ACPI disabled. [ 1.599078] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.602900] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 1.607796] tegra-pmc: ### PMC reset level: L0 [ 1.612339] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.617392] tegra-pmc: PMC Prod config success [ 1.626962] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.630629] printk: console [ttyTCU0] enabled [ 1.630629] printk: console [ttyTCU0] enabled 1.636083] printk: bootconsole [tegra_comb_uart0] disabled [ 1.636083] printk: bootconsole [tegra_comb_uart0] disabled [ 1.648641] arm-smmu 10000000.iommu: probing hardware configuration... [ 1.653847] arm-smmu 10000000.iommu: SMMUv2 with: [ 1.658604] arm-smmu 10000000.iommu: stage 1 translation [ 1.664262] arm-smmu 10000000.iommu: stage 2 translation [ 1.669230] arm-smmu 10000000.iommu: nested translation [ 1.674827] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 1.681932] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 1.692104] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 1.695303] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.702036] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.709215] arm-smmu 12000000.iommu: probing hardware configuration... [ 1.714724] arm-smmu 12000000.iommu: SMMUv2 with: [ 1.719445] arm-smmu 12000000.iommu: stage 1 translation [ 1.724701] arm-smmu 12000000.iommu: stage 2 translation [ 1.730404] arm-smmu 12000000.iommu: nested translation [ 1.732470] random: fast init done [ 1.735556] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 1.746158] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 1.756254] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 1.759524] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.765827] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.773476] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 1.782906] tegra_profiler: version: 1.147, samples/io: 49/28 [ 1.786222] tegra_profiler: auth: init [ 1.790755] THERMAL EST: found 3 subdevs [ 1.793833] THERMAL EST num_resources: 0 [ 1.797961] [THERMAL EST subdev 0] [ 1.801069] [THERMAL EST subdev 1] [ 1.804581] [THERMAL EST subdev 2] [ 1.807755] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.814243] THERMAL EST: thz register success. [ 1.818442] THERMAL EST: end of probe, return err: 0 [ 1.824043] nvsciipc: loaded module [ 1.831404] tun: Universal TUN/TAP device driver, 1.6 [ 1.833553] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.839768] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.845060] e1000e: Intel(R) PRO/1000 Network Driver [ 1.850258] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.856074] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.861632] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.867888] PPP generic driver version 2.4.2 [ 1.872027] PPP BSD Compression module registered [ 1.876617] PPP Deflate Compression module registered [ 1.881857] PPP MPPE Compression module registered [ 1.886646] usbcore: registered new interface driver r8152 [ 1.892416] usbcore: registered new interface driver asix [ 1.897491] usbcore: registered new interface driver ax88179_178a [ 1.903605] usbcore: registered new interface driver cdc_ether [ 1.909829] usbcore: registered new interface driver net1080 [ 1.915384] usbcore: registered new interface driver cdc_subset [ 1.921170] usbcore: registered new interface driver zaurus [ 1.926876] usbcore: registered new interface driver cdc_ncm [ 1.932542] usbcore: registered new interface driver aqc111 [ 1.938185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.944510] ohci-pci: OHCI PCI platform driver [ 1.948560] ohci-platform: OHCI generic platform driver [ 1.954551] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 1.960995] usbcore: registered new interface driver uas [ 1.965191] usbcore: registered new interface driver usb-storage [ 1.971055] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 1.977265] mousedev: PS/2 mouse device common for all mice [ 1.982094] usbcore: registered new interface driver xpad [ 1.990497] tegra_rtc c2a0000.rtc: registered as rtc1 [ 1.992739] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:24 UTC (24) [ 2.000538] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.007145] i2c /dev entries driver [ 2.010460] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.016176] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.021549] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.026908] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.032313] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.037890] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.043182] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.057446] device-mapper: uevent: version 1.0.3 [ 2.057917] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.063721] cpuidle: Initializing cpuidle driver [ 2.067885] sdhci: Secure Digital Host Controller Interface driver [ 2.072615] sdhci: Copyright(c) Pierre Ossman [ 2.076453] Synopsys Designware Multimedia Card Interface Driver [ 2.082924] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.088901] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.094866] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.102195] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.122744] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.133328] vdd-1v0: supplied by regulator-dummy [ 2.139150] vdd-1v8-hs: supplied by regulator-dummy [ 2.144369] vdd-1v8-ls: supplied by regulator-dummy [ 2.149575] vdd-1v8-ao: supplied by regulator-dummy [ 2.153893] vddio-ddr-1v1: supplied by regulator-dummy [ 2.158988] vdd-rtc: supplied by regulator-dummy [ 2.161174] spmic-ldo1: supplied by regulator-dummy [ 2.163013] vdd-ao-3v3: supplied by regulator-dummy [ 2.169728] vddio-emmc-3v3: supplied by regulator-dummy [ 2.176438] spmic-ldo4: supplied by regulator-dummy [ 2.178314] vdd-usb-3v3: supplied by regulator-dummy [ 2.185091] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 2.191958] vdd-csi-1v2: supplied by vdd-1v8-ls [ 2.198085] spmic-ldo8: supplied by vdd-1v8-ls [ 2.200202] gpio-510 (gpio_default): hogged as output/high [ 2.202284] gpio-511 (gpio_default): hogged as output/high [ 2.205256] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 2.341005] max77686-rtc max77620-rtc: registered as rtc0 [ 2.342432] max77620-power max20024-power: Event recorder REG_NVERC : 0x44 [ 2.342762] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 3.187969] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.189020] hid: raw HID events driver (C) Jiri Kosina [ 3.189909] usbcore: registered new interface driver usbhid [ 3.190040] usbhid: USB HID core driver [ 3.192490] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.193900] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 26.068903] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.143001] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.906 ms) 墁 3.277987] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.278607] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.279703] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.280588] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.282561] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.283280] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.283959] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.285593] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.286041] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.289127] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.294913] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.300872] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.305628] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.312088] denver_knobs_init:MTS_VERSION:55637613 [ 3.323934] t19x_cache tegra-cache: probed [ 3.326766] optee: probing for conduit method. [ 3.327673] optee: revision 3.16 (65cc2218) [ 3.328706] optee: dynamic shared memory is enabled [ 3.332784] optee: initialized driver [ 3.339255] nvpmodel: initialized successfully [ 3.340267] tegra_hv: get_hvd: not initialized yet [ 3.345097] user_ivc_mempool: hypervisor not present [ 3.351337] usbcore: registered new interface driver snd-usb-audio [ 3.357568] u32 classifier [ 3.358818] input device check on [ 3.362605] Actions configured [ 3.366533] Initializing XFRM netlink socket [ 3.371342] NET: Registered protocol family 10 [ 3.377971] Segment Routing with IPv6 [ 3.378649] NET: Registered protocol family 17 [ 3.382647] NET: Registered protocol family 15 [ 3.387521] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.400858] Bluetooth: RFCOMM socket layer initialized [ 3.405775] Bluetooth: RFCOMM ver 1.11 [ 3.409503] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.415173] Bluetooth: HIDP socket layer initialized [ 3.421495] 9pnet: Installing 9P2000 support [ 3.424564] Key type dns_resolver registered [ 3.430406] registered taskstats version 1 [ 3.432929] Loading compiled-in X.509 certificates [ 3.446046] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 3.448916] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 3.459045] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 3.460863] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 3.469778] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 3.478102] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 3.593926] tegra194-pcie 14160000.pcie: Link up [ 3.596878] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 3.597103] pci_bus 0004:00: root bus resource [bus 00-ff] [ 3.597271] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 3.597504] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 3.597711] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 3.598130] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 3.598575] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 3.611337] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 3.611896] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.612399] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 3.613994] pci 0004:01:00.0: supports D1 D2 [ 3.614152] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.622748] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 3.623108] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 3.623421] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 3.623859] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.624173] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 3.624374] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 3.628527] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 3.635826] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 3.644617] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 3.654702] pcieport 0004:00:00.0: Adding to iommu group 6 [ 3.659520] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 3.664760] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 3.671685] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 3.680120] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 3.682341] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 3.691037] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.699310] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 4.814789] tegra194-pcie 141a0000.pcie: Phy link never came up [ 4.815404] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 4.815657] pci_bus 0005:00: root bus resource [bus 00-ff] [ 4.815812] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 4.816107] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 4.816308] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 4.816671] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 4.817089] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 4.833505] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 4.834073] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 4.836066] pcieport 0005:00:00.0: Adding to iommu group 7 [ 4.837437] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 4.838828] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 4.840228] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 4.841163] pci 0005:00:00.0: Removing from iommu group 7 [ 4.841437] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 4.872647] host1x 13e10000.host1x: Adding to iommu group 8 [ 4.894533] host1x 13e10000.host1x: initialized [ 4.896212] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 4.897096] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 4.898381] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 4.899020] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 4.899959] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 4.900569] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 4.901560] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 4.902220] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 4.907954] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 4.914906] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 4.924681] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 4.931592] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 4.941646] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 4.949053] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 4.958954] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 4.965605] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 4.976070] falcon 15340000.vic: Adding to iommu group 17 [ 4.990152] falcon 15340000.vic: initialized [ 4.991256] falcon 15380000.nvjpg: Adding to iommu group 17 [ 4.996996] falcon 15380000.nvjpg: initialized [ 4.997681] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.008844] falcon 154c0000.nvenc: initialized [ 5.009454] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.018057] falcon 15a80000.nvenc1: initialized [ 5.018673] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.031885] nvdec 15480000.nvdec: initialized [ 5.032436] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.041546] nvdec 15140000.nvdec1: initialized [ 5.042172] tsec 15500000.tsec: Adding to iommu group 18 [ 5.047197] tsec 15500000.tsec: initialized [ 5.047661] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.055922] tsec 15100000.tsecb: initialized [ 5.059465] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.083949] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.095206] gpio-374 (wifi-enable): hogged as output/high [ 5.095458] gpio-431 (camera-control-output-low): hogged as output/low [ 5.095682] gpio-432 (camera-control-output-low): hogged as output/low [ 5.097306] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.099087] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.100116] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.106816] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.112077] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.118103] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.123823] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.132681] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.139505] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.150443] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.155895] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.161809] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.170942] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.180219] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.187317] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.194944] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.201231] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.210592] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.217126] pva 16000000.pva0: Adding to iommu group 22 [ 5.243047] pva 16000000.pva0: initialized [ 5.248223] pva 16800000.pva1: Adding to iommu group 23 [ 5.259769] pva 16800000.pva1: initialized [ 5.264449] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.284770] nvdla 15880000.nvdla0: initialized [ 5.286121] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.294609] nvdla 158c0000.nvdla1: initialized [ 5.297531] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.297763] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.298153] tegradccommon 15200000.display-hub: dma mapping done [ 5.298243] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.298671] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.299349] tegradc 15200000.display: Adding to iommu group 26 [ 5.299397] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.301409] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.306882] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.308011] tegradc 15210000.display: Adding to iommu group 26 [ 5.308024] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.308136] generic_infoframe_type: 0x87 [ 5.308234] tegradc 15200000.display: DT parsed successfully [ 5.308327] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 5.312038] tegra_cec 3960000.tegra_cec: probed [ 5.334123] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.343196] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 5.346774] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 5.346784] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 5.360994] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 5.371743] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 5.377410] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 5.396053] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 5.396422] kfuse 3830000.kfuse: initialized [ 5.412286] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.418112] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.418723] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 5.425207] serial-tegra 3100000.serial: Adding to iommu group 2 [ 5.437901] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 5.438758] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 5.446214] tegradc 15210000.display: disp0 connected to head1->sor [ 5.454971] serial-tegra 3110000.serial: Adding to iommu group 2 [ 5.459725] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 5.466270] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 5.472973] tegradc 15210000.display: DT parsed successfully [ 5.482603] serial-tegra 3140000.serial: Adding to iommu group 2 [ 5.487177] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 5.501338] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 5.521471] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 5.521883] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.524606] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 5.532877] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 5.541556] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 5.548371] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.555679] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.562923] usb usb1: Product: xHCI Host Controller [ 5.568047] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.574376] usb usb1: SerialNumber: 3610000.xhci [ 5.580004] hub 1-0:1.0: USB hub found [ 5.582677] hub 1-0:1.0: 4 ports detected [ 5.587284] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.592075] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 5.599953] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 5.607695] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 5.615554] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.622784] usb usb2: Product: xHCI Host Controller [ 5.627466] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.633676] usb usb2: SerialNumber: 3610000.xhci [ 5.639227] hub 2-0:1.0: USB hub found [ 5.642155] hub 2-0:1.0: 4 ports detected [ 5.682341] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 5.688446] i2c i2c-2: Added multiplexed i2c bus 9 [ 5.689650] i2c i2c-2: Added multiplexed i2c bus 10 [ 5.689928] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 5.703194] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1902000 KHz, changing to: 1907200 KHz [ 5.704270] tegra194-cpufreq ccplex: probed with BWMGR [ 5.705589] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 5.706274] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 5.706748] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 5.708064] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 5.717656] mmc0: CQHCI version 5.10 [ 5.719497] tegra194-vi5 15c10000.vi: initialized [ 5.720939] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.722587] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 5.726042] generic_infoframe_type: 0x87 [ 5.732698] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 5.736197] tegradc 15200000.display: DT parsed successfully [ 5.744267] nvethernet 2490000.ethernet: failed to read MDIO address [ 5.744280] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 5.745879] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 5.749839] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 5.756389] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 5.763882] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.771128] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 5.782173] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 5.785302] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 5.793542] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 5.800042] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 5.806737] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 5.808006] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 5.815080] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 5.829350] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 5.832361] mmc0: Command Queue Engine enabled [ 5.832366] mmc0: periodic cache flush enabled [ 5.832380] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.832872] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 5.833017] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 5.833153] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 5.833303] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 5.837089] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 5.844280] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 5.850151] nvethernet 2490000.ethernet: Macsec not supported [ 5.851459] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 5.857636] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 5.861849] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 5.862011] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 5.862125] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 5.862247] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.863330] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 5.865460] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 5.928413] tegra-se-nvhost 15810000.se: initialized [ 5.938190] tegradc 15200000.display: probed [ 5.981864] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 5.992003] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 5.998751] tegra-se-nvhost 15820000.se: initialized [ 6.005119] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.009566] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.016072] tegra-se-nvhost 15830000.se: initialized [ 6.021534] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.027076] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.033482] tegra-se-nvhost 15840000.se: initialized [ 6.037677] Console: switching to colour frame buffer device 240x67 [ 6.039220] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.043529] tegradc 15200000.display: fb registered [ 6.043623] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.051430] tegra_actmon d230000.actmon: in actmon_register()... [ 6.055556] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.060695] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.066305] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.067739] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.067746] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.067769] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.067773] usb 1-2: Manufacturer: Generic [ 6.069737] hub 1-2:1.0: USB hub found [ 6.070857] hub 1-2:1.0: 4 ports detected [ 6.072583] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.124311] hvc_sysfs: hypervisor is not present [ 6.131035] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.155855] ALSA device list: [ 6.155951] No soundcards found. [ 6.157096] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.157324] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.160516] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.166911] Extcon AUX1(HDMI) enable [ 6.170595] tegradc 15210000.display: disp1 connected to head1->sor [ 6.176589] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.183750] tegradc 15210000.display: DT parsed successfully [ 6.189253] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.190785] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.197538] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.210835] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.223701] tegradc 15210000.display: probed [ 6.224066] tegradc 15210000.display: fb registered [ 6.229823] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.233916] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.234053] Freeing unused kernel memory: 3968K [ 6.239101] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.239126] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.239130] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.239134] usb 2-3: Manufacturer: Generic [ 6.241699] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.250028] hub 2-3:1.0: USB hub found [ 6.266026] Run /init as init process [ 6.268581] hub 2-3:1.0: 4 ports detected [ 6.287685] tegradc 15210000.display: blank - powerdown [ 6.292641] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.292644] Extcon DP: HPD disabled [ 6.292648] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.292656] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.292669] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.321861] tegra_cec 3960000.tegra_cec: physical address: 10:00. Finding OTA work dir on external storage devices Checking whether device /dev/mmcblk?p1 exist Looking for OTA work directory on the device(s): /dev/mmcblk0p1 Checking whether device /dev/sd?1 exist Device /dev/sd?1 does not exist Checking whether device /dev/nvme?n1p1 exist Device /dev/nvme?n1p1 does not exist Finding OTA work dir on internal storage device 榳ARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk 墁 6.330412] tegradc 15200000.display: blank - powerdown [ 6.353446] Root device found: initrd [ 6.355020] Mount initrd as rootfs and enter recovery mode [ 6.357841] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.364791] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.364796] Extcon AUX1(HDMI) disable [ 6.386406] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 6.386412] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 6.388357] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.389236] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.404424] tegradc 15200000.display: unblank [ 6.405600] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.405870] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.412064] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.414021] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.418101] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.418104] Extcon AUX1(HDMI) enable [ 6.430801] tegradc 15200000.display: sync windows ret = 247 [ 6.458783] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.482416] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 6.489333] Extcon HDMI:OTA work HPectD enabled /m nt/ota[ _wo448rk tegnotradc 1 found520000 on /d0.dmmcispblklay: hdmi : plugged [ 6.507014] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 6.510168] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.517311] usb 1-3: Product: Bluetooth Radio [ 6.521626] usb 1-OTA work 3: Manufacturerory: Real notek t found o[ n interna.52nd 5] usbernal storagSerialNumevicesber: 00e04c000001 bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-5.0# [ 38.001877] vdd-1v8-sd: disabling [ 38.002009] vdd-3v3-cvb: disabling [ 38.002089] vdd-1v8-cvb: disabling [ 38.002168] vdd-epb-1v0: disabling [ 38.002244] vdd-fan: disabling [ 38.002333] vdd_sys_en: disabling [ 53.864016] random: crng init done ? [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x0, rst_level: 0x0 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.108] I> Temperature = 55500 [0000.111] W> Skipping boost for clk: BPMP_CPU_NIC [0000.115] W> Skipping boost for clk: BPMP_APB [0000.119] W> Skipping boost for clk: AXI_CBB [0000.123] W> Skipping boost for clk: AON_CPU_NIC [0000.128] W> Skipping boost for clk: CAN1 [0000.131] W> Skipping boost for clk: CAN2 [0000.136] I> Boot-device: QSPI (instance: 0) [0000.140] I> Qspi flash params source = mb1bct [0000.144] I> Qspi clock source : pllc_out0 [0000.148] I> Qspi-0 reinitialized [0000.151] I> Qspi flash params source = mb1bct [0000.164] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.171] W> Thermal config not found in BCT [0000.179] W> MEMIO rail config not found in BCT [0000.189] I> Qspi flash params source = mb1bct [0000.202] I> Qspi flash params source = mb1bct [0000.236] I> Qspi flash params source = mb1bct [0000.800] I> Qspi flash params source = mb1bct [0000.817] I> Qspi flash params source = mb1bct [0000.856] W> Platform config not found in BCT [0000.883] I> Qspi flash params source = mb1bct [0000.908] I> MB1 done ?跩ain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ?[0000.918] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.919] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.919] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.920] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.926] W> device prod register failed [0000.929] I> gpio framework initialized [0000.933] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.940] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.948] I> No valid sdcard_params in mb1_bct [0000.952] I> Boot_device: QSPI_FLASH instance: 0 [0000.957] I> qspi flash-0 params source = boot args [0000.962] I> QSPI-0l initialized successfully [0000.966] I> sdmmc-3 params source = safe params [0001.365] I> sdmmc DDR50 mode [0001.383] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.400] W> Cannot find any partition table for 00000003 [0001.401] > PARTITION_MANAGER: Failed to publish partition. [0001.416] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.418] I> Active Boot chain : 0 [0002.089] I> Relocating BR-BCT [0002.090] > DEVICE_PROD: device prod is not initialized. [0002.395] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.396] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.397] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.397] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.398] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.398] I> dram_block larger than 80000000 [0002.401] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.412] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.415] I> found decompressor handler: lz4 [0002.644] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.645] I> Setting EKB blob info to OPTEE dtb finished. 誏OTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ?bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ?歊lk_early initialized 觨/TC:滵ail_early initialized ?N殞use initialized hwwdt initialized 鄤n-s漮194_ec_get_ec_list: found 45 ecs 輑cure exter歋c initialized vmon_setup_monitors: found 3 monitors vmon initialized 鄚al榥dc initialized ?殞mon_populate_monitors: found 73 monitors 覡T found 殞mon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized 觨/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug歊lk_dt_late initialized ?滱oc_late initialized ?漥m_post initialized dbells initialized ? 0歍mce initialized cvc initialized ?:23:20 UTC 2榥vfs_clk_mach_post initialized ?22 榥vfs_clk_platform_post initialized 跾ar歊vc_late initialized regulator_post initialized 踄h64漷m initialized console_late initialized clk_dt_post initialized mc_reg initialized ? I/TC: WARNIN漥g_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] 觩: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ?[0003.265] I> Welcome to NVDisp-Init [0003.265] I> NVDisp-Init version: t194-f9ecfedc [0003.266] I> CPU-BL Params @ 0xca020000 [0003.266] I> 0) Base:0x00000000 Size:0x00000000 [0003.266] I> 1) Base:0xc8300000 Size:0x00100000 [0003.267] I> 2) Base:0xc9800000 Size:0x00200000 [0003.267] I> 3) Base:0xc8600000 Size:0x00200000 [0003.269] I> 4) Base:0xc8200000 Size:0x00100000 [0003.274] I> 5) Base:0xc8100000 Size:0x00100000 [0003.278] I> 6) Base:0xc9400000 Size:0x00400000 [0003.283] I> 7) Base:0xc9000000 Size:0x00400000 [0003.287] I> 8) Base:0xc8000000 Size:0x00100000 [0003.292] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.296] I> 10) Base:0xca800000 Size:0x00800000 [0003.301] I> 11) Base:0x40000000 Size:0x00040000 [0003.305] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.310] I> 13) Base:0x40046000 Size:0x00002000 [0003.314] I> 14) Base:0x40048000 Size:0x00002000 [0003.319] I> 15) Base:0xaf000000 Size:0x00004000 [0003.323] I> 16) Base:0x4004a000 Size:0x00002000 [0003.328] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.332] I> 18) Base:0x4004c000 Size:0x00002000 [0003.336] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.341] I> 20) Base:0x4004e000 Size:0x00002000 [0003.345] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.350] I> 22) Base:0x00000000 Size:0x00000000 [0003.354] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.359] I> 24) Base:0xcc000000 Size:0x02000000 [0003.363] I> 25) Base:0x40050000 Size:0x00002000 [0003.368] I> 26) Base:0x40040000 Size:0x00006000 [0003.372] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.377] I> 28) Base:0xc8400000 Size:0x00200000 [0003.381] I> 29) Base:0xc8800000 Size:0x00400000 [0003.386] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.390] I> 31) Base:0x00000000 Size:0x00000000 [0003.394] I> 32) Base:0xf8000000 Size:0x08000000 [0003.399] I> 33) Base:0xce000000 Size:0x2a000000 [0003.403] I> 34) Base:0xcb000000 Size:0x01000000 [0003.408] I> 35) Base:0xae000000 Size:0x01000000 [0003.412] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.417] I> 37) Base:0xca000000 Size:0x00800000 [0003.421] I> 38) Base:0x80000000 Size:0x20000000 [0003.426] I> 39) Base:0xb0000000 Size:0x08000000 [0003.430] I> 40) Base:0x00000000 Size:0x00000000 [0003.435] I> 41) Base:0x00000000 Size:0x00000000 [0003.439] I> 42) Base:0x00000000 Size:0x00000000 [0003.444] I> 43) Base:0x00000000 Size:0x00000000 [0003.448] I> 44) Base:0x00000000 Size:0x00000000 [0003.452] I> 45) Base:0x00000000 Size:0x00000000 [0003.457] GIC-SPI Target CPU: 0 [0003.460] Interrupts Init done [0003.463] calling constructors [0003.466] initializing heap [0003.468] I> Heap: [0xa0960000 ... 0xadf00000] [0003.473] initializing threads [0003.475] initializing timers [0003.478] creating bootstrap completion thread [0003.483] top of bootstrap2() [0003.485] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.490] initializing platform [0003.493] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.498] W> device prod register failed [0003.502] I> Bl_dtb @0xadf00000 [0003.505] I> gpio framework initialized [0003.516] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.521] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.527] I> fixed regulator driver initialized [0003.543] I> register 'maxim' power off handle [0003.545] I> virtual i2c enabled [0003.545] I> registered 'maxim,max20024' pmic [0003.546] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.547] I> Boot-device: QSPI [0003.549] I> Boot_device: QSPI_FLASH instance: 0 [0003.554] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.564] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.572] I> QSPI source rate = 204000 Khz [0003.575] I> Requested rate for QSPI clock = 34000 Khz [0003.580] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.585] I> tx_clk_tap_delay : 0 [0003.588] I> rx_clk_tap_delay : 16 [0003.591] I> QSPI Flash Size = 32 MB [0003.599] I> Qspi initialized successfully [0003.599] I> qspi flash-0 params source = boot args [0003.603] W> No board IDs available [0003.606] E> Failed to get board id info! [0003.612] I> sdmmc-3 params source = safe params [0003.619] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.621] W> Cannot find any partition table for 00000003 [0003.625] E> Failed to publish 00000003 [0003.635] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.652] I> regulator 'vdd-hdmi-5v0' already enabled [0003.659] I> regulator 'vdd-hdmi-5v0' already enabled [0003.659] I> hdmi cable connected [0003.665] W> set volts not configured for 'vdd-1v0' [0003.670] W> set volts not configured for 'vdd-1v8-hs' [0003.670] I> retrieved tmds range from prod_list_hdmi_soc [0003.677] E> invalid display type [0003.678] E> cannot find any other nvdisp nodes [0003.695] I> edid read success [0003.707] I> edid read success [0003.708] I> width = 640, height = 480, frequency = 25174825 [0003.708] I> width = 1920, height = 1080, frequency = 148500000 [0003.708] I> width = 1280, height = 768, frequency = 79500000 [0003.709] I> width = 1360, height = 768, frequency = 85500000 [0003.709] I> width = 720, height = 480, frequency = 26973026 [0003.713] I> width = 720, height = 576, frequency = 26973026 [0003.719] I> width = 1280, height = 720, frequency = 74175824 [0003.724] I> width = 1280, height = 720, frequency = 74175824 [0003.730] I> width = 1920, height = 1080, frequency = 148351648 [0003.736] I> width = 1920, height = 1080, frequency = 148351648 [0003.741] I> width = 720, height = 480, frequency = 26973026 [0003.747] I> width = 720, height = 576, frequency = 26973026 [0003.752] I> width = 3840, height = 2160, frequency = 296703296 [0003.758] I> width = 3840, height = 2160, frequency = 296703296 [0003.764] I> width = 3840, height = 2160, frequency = 296703296 [0003.770] I> width = 3840, height = 2160, frequency = 296703296 [0003.775] I> width = 4096, height = 2160, frequency = 296703296 [0003.781] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.792] I> hdmi_enable, starting HDMI initialisation [0003.797] I> hdmi_enable, HDMI initialisation complete [0003.807] initializing target [0003.808] calling apps_init() [0003.808] starting app kernel_boot_app [0003.809] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting Recovery Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] printk: bootconsole [tegra_comb_uart0] enabled [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x259442018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259445f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/initrd rw rootwait console=ttyTCU0,115200n8 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6929316K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 479000K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009023] Console: colour dummy device 80x25 [ 0.012374] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022761] pid_max: default: 32768 minimum: 301 [ 0.027490] LSM: Security Framework initializing [ 0.032076] Yama: becoming mindful. [ 0.035721] SELinux: Initializing. [ 0.039477] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.046922] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.057632] rcu: Hierarchical SRCU implementation. [ 0.060096] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.068146] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.085258] DTB Build time: Aug 10 2022 20:31:49 [ 0.092477] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.096867] Remapping and enabling EFI services. [ 0.103066] smp: Bringing up secondary CPUs ... ? Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot 墁 0.198905] Detected PIPT I-cache on CPU1 [ 0.198981] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.230349] Detected PIPT I-cache on CPU2 [ 0.230459] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.259958] Detected PIPT I-cache on CPU3 [ 0.260097] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.289768] Detected PIPT I-cache on CPU4 [ 0.289929] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.319653] Detected PIPT I-cache on CPU5 [ 0.319903] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.320218] smp: Brought up 1 node, 6 CPUs [ 0.321263] SMP: Total of 6 processors activated. [ 0.321419] CPU features: detected: Privileged Access Never [ 0.321524] CPU features: detected: LSE atomic instructions [ 0.321640] CPU features: detected: User Access Override [ 0.322055] CPU features: detected: 32-bit EL0 Support [ 0.322414] CPU features: detected: RAS Extension Support [ 0.322860] CPU features: detected: CRC32 instructions [ 0.323562] CPU features: detected: 32-bit EL1 Support [ 0.396284] CPU: All CPU(s) started at EL2 [ 0.401847] devtmpfs: initialized [ 0.449864] Registered cp15_barrier emulation handler [ 0.450044] Registered setend emulation handler [ 0.450134] KASLR enabled [ 0.450404] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.450597] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.452023] pinctrl core: initialized pinctrl subsystem [ 0.453278] SMBIOS 3.0.0 present. [ 0.453368] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.454171] NET: Registered protocol family 16 [ 0.456421] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.457297] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.458344] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.458539] audit: initializing netlink subsys (disabled) [ 0.458927] audit: type=2000 audit(0.404:1): state=initialized audit_enabled=0 res=1 [ 0.459369] thermal_sys: Registered thermal governor 'step_wise' [ 0.459375] thermal_sys: Registered thermal governor 'power_allocator' [ 0.459496] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.463228] cpuidle: using governor menu [ 0.471908] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.478644] ASID allocator initialised with 32768 entries [ 0.483917] Serial: AMBA PL011 UART driver [ 0.491152] Tegra reboot handler registered. [ 0.563831] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.564052] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.564352] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.564525] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.564887] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.565061] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.565327] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.565500] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.565745] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.565895] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.568349] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.568499] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.574114] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.580601] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.587095] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.593629] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.600189] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.606651] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.613211] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.619696] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.626173] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.632655] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.638780] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.645422] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.651817] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.658194] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.664600] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.671056] mc-err: mcerr ops are set to t19x [ 0.686737] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.686898] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.688543] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.695196] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.708750] ACPI: Interpreter disabled. [ 0.710043] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.711387] iommu: Default domain type: Translated [ 0.715202] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.721779] SCSI subsystem initialized [ 0.725161] usbcore: registered new interface driver usbfs [ 0.730420] usbcore: registered new interface driver hub [ 0.735905] usbcore: registered new device driver usb [ 0.741378] mc: Linux media interface: v0.10 [ 0.745381] videodev: Linux video capture interface: v2.00 [ 0.751120] pps_core: LinuxPPS API ver. 1 registered [ 0.755648] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.764777] PTP clock support registered [ 0.768832] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.775664] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.782610] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.789533] Registered efivars operations [ 0.797862] FPGA manager framework [ 0.798034] Advanced Linux Sound Architecture Driver Initialized. [ 0.803077] Bluetooth: Core ver 2.22 [ 0.806156] NET: Registered protocol family 31 [ 0.810426] Bluetooth: HCI device and connection manager initialized [ 0.816815] Bluetooth: HCI socket layer initialized [ 0.821797] Bluetooth: L2CAP socket layer initialized [ 0.827054] Bluetooth: SCO socket layer initialized [ 0.833669] camchar: rtcpu character device driver loaded [ 0.838241] clocksource: Switched to clocksource arch_sys_counter [ 1.149264] VFS: Disk quotas dquot_6.6.0 [ 1.149400] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.149865] pnp: PnP ACPI: disabled [ 1.161242] la/ptsa driver initialized. [ 1.161450] NET: Registered protocol family 2 [ 1.161663] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.166472] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.166738] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.167119] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.167658] TCP: Hash tables configured (established 65536 bind 65536) [ 1.167909] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.168120] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.168449] NET: Registered protocol family 1 [ 1.169174] RPC: Registered named UNIX socket transport module. [ 1.169307] RPC: Registered udp transport module. [ 1.169400] RPC: Registered tcp transport module. [ 1.169483] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.169612] PCI: CLS 0 bytes, default 64 [ 1.169876] Trying to unpack rootfs image as initramfs... [ 1.442949] Freeing initrd memory: 11876K [ 1.446654] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.446808] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.446929] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.447334] kvm [1]: IPA Size Limit: 40 bits [ 1.448109] kvm [1]: vgic interrupt IRQ9 [ 1.448729] kvm [1]: VHE mode initialized successfully [ 1.450015] Initialise system trusted keyrings [ 1.450509] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.455220] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.456060] NFS: Registering the id_resolver key type [ 1.456191] Key type id_resolver registered [ 1.456282] Key type id_legacy registered [ 1.456429] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.456561] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.456742] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.465204] NET: Registered protocol family 38 [ 1.465314] Key type asymmetric registered [ 1.465412] Asymmetric key parser 'x509' registered [ 1.465556] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.465969] io scheduler mq-deadline registered [ 1.466103] io scheduler kyber registered [ 1.471316] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.475611] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.479003] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.484823] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.490317] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.496260] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.505709] scrncapt: init (heads:4 wins:6 planes:4) [ 1.505999] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.507528] EINJ: ACPI disabled. [ 1.519157] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.523896] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 1.529020] tegra-pmc: ### PMC reset level: L0 [ 1.533305] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.538354] tegra-pmc: PMC Prod config success [ 1.546943] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.550756] printk: console [ttyTCU0] enabled [ 1.550756] printk: console [ttyTCU0] enabled [ 1.557350] printk: bootconsole [tegra_comb_uart0] disabled [ 1.557350] printk: bootconsole [tegra_comb_uart0] disabled [ 1.569535] arm-smmu 10000000.iommu: probing hardware configuration... [ 1.575321] arm-smmu 10000000.iommu: SMMUv2 with: [ 1.579811] arm-smmu 10000000.iommu: stage 1 translation [ 1.585470] arm-smmu 10000000.iommu: stage 2 translation [ 1.590487] arm-smmu 10000000.iommu: nested translation [ 1.596060] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 1.603413] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 1.614212] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 1.616795] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.623011] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.630666] arm-smmu 12000000.iommu: probing hardware configuration... [ 1.635697] arm-smmu 12000000.iommu: SMMUv2 with: [ 1.640424] arm-smmu 12000000.iommu: stage 1 translation [ 1.646199] arm-smmu 12000000.iommu: stage 2 translation [ 1.651358] arm-smmu 12000000.iommu: nested translation [ 1.657041] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 1.657076] random: fast init done [ 1.664237] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 1.678174] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 1.680766] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.687058] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.694716] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 1.704236] tegra_profiler: version: 1.147, samples/io: 49/28 [ 1.707469] tegra_profiler: auth: init [ 1.711990] THERMAL EST: found 3 subdevs [ 1.715068] THERMAL EST num_resources: 0 [ 1.719165] [THERMAL EST subdev 0] [ 1.722322] [THERMAL EST subdev 1] [ 1.725794] [THERMAL EST subdev 2] [ 1.728983] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.735474] THERMAL EST: thz register success. [ 1.739679] THERMAL EST: end of probe, return err: 0 [ 1.745207] nvsciipc: loaded module [ 1.752425] tun: Universal TUN/TAP device driver, 1.6 [ 1.754776] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.760994] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.766319] e1000e: Intel(R) PRO/1000 Network Driver [ 1.771494] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.777318] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.782865] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.789020] PPP generic driver version 2.4.2 [ 1.793289] PPP BSD Compression module registered [ 1.797846] PPP Deflate Compression module registered [ 1.803091] PPP MPPE Compression module registered [ 1.807844] usbcore: registered new interface driver r8152 [ 1.813608] usbcore: registered new interface driver asix [ 1.818718] usbcore: registered new interface driver ax88179_178a [ 1.824808] usbcore: registered new interface driver cdc_ether [ 1.831025] usbcore: registered new interface driver net1080 [ 1.836618] usbcore: registered new interface driver cdc_subset [ 1.842413] usbcore: registered new interface driver zaurus [ 1.848122] usbcore: registered new interface driver cdc_ncm [ 1.853773] usbcore: registered new interface driver aqc111 [ 1.859410] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.865749] ohci-pci: OHCI PCI platform driver [ 1.869787] ohci-platform: OHCI generic platform driver [ 1.875673] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 1.882066] usbcore: registered new interface driver uas [ 1.886093] usbcore: registered new interface driver usb-storage [ 1.892257] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 1.898500] mousedev: PS/2 mouse device common for all mice [ 1.903238] usbcore: registered new interface driver xpad [ 1.911451] tegra_rtc c2a0000.rtc: registered as rtc1 [ 1.914214] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:24 UTC (24) [ 1.922031] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.928569] i2c /dev entries driver [ 1.931679] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 1.937397] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 1.942898] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 1.948355] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 1.953504] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 1.958989] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 1.964421] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 1.978187] device-mapper: uevent: version 1.0.3 [ 1.978698] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 1.985271] cpuidle: Initializing cpuidle driver [ 1.988978] sdhci: Secure Digital Host Controller Interface driver [ 1.993593] sdhci: Copyright(c) Pierre Ossman [ 1.997937] Synopsys Designware Multimedia Card Interface Driver [ 2.003889] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.009883] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.010662] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.023231] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.043201] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.053396] vdd-1v0: supplied by regulator-dummy [ 2.059269] vdd-1v8-hs: supplied by regulator-dummy [ 2.064374] vdd-1v8-ls: supplied by regulator-dummy [ 2.069512] vdd-1v8-ao: supplied by regulator-dummy [ 2.073768] vddio-ddr-1v1: supplied by regulator-dummy [ 2.078951] vdd-rtc: supplied by regulator-dummy [ 2.081083] spmic-ldo1: supplied by regulator-dummy [ 2.082990] vdd-ao-3v3: supplied by regulator-dummy [ 2.089782] vddio-emmc-3v3: supplied by regulator-dummy [ 2.096424] spmic-ldo4: supplied by regulator-dummy [ 2.098209] vdd-usb-3v3: supplied by regulator-dummy [ 2.105081] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 2.111909] vdd-csi-1v2: supplied by vdd-1v8-ls [ 2.118124] spmic-ldo8: supplied by vdd-1v8-ls [ 2.120168] gpio-510 (gpio_default): hogged as output/high [ 2.122129] gpio-511 (gpio_default): hogged as output/high [ 2.125070] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 2.260855] max77686-rtc max77620-rtc: registered as rtc0 [ 2.261965] max77620-power max20024-power: Event recorder REG_NVERC : 0x4 [ 2.262381] max77620 4-003c: max77620 probe successful 漷m_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized 墁 3.083515] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.084542] hid: raw HID events driver (C) Jiri Kosina [ 3.085140] usbcore: registered new interface driver usbhid [ 3.085300] usbhid: USB HID core driver [ 3.086990] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.088084] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 嬂 26.015179] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.090650] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.279 ms) 墁 3.173453] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.173972] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.175136] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.175791] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.177449] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.177974] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.178605] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.179894] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.180148] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.181696] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 3.183273] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 3.190096] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 3.196919] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 3.197007] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.217150] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.223468] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.227835] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.234016] denver_knobs_init:MTS_VERSION:55637613 [ 3.246458] t19x_cache tegra-cache: probed [ 3.248600] optee: probing for conduit method. [ 3.249381] optee: revision 3.16 (65cc2218) [ 3.250777] optee: dynamic shared memory is enabled [ 3.255709] optee: initialized driver [ 3.262846] nvpmodel: initialized successfully [ 3.263442] tegra_hv: get_hvd: not initialized yet [ 3.267811] user_ivc_mempool: hypervisor not present [ 3.275229] usbcore: registered new interface driver snd-usb-audio [ 3.280653] u32 classifier [ 3.281873] input device check on [ 3.285615] Actions configured [ 3.288937] Initializing XFRM netlink socket [ 3.294150] NET: Registered protocol family 10 [ 3.301073] Segment Routing with IPv6 [ 3.301346] NET: Registered protocol family 17 [ 3.305784] NET: Registered protocol family 15 [ 3.309960] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.323513] Bluetooth: RFCOMM socket layer initialized [ 3.328176] Bluetooth: RFCOMM ver 1.11 [ 3.332324] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.337928] Bluetooth: HIDP socket layer initialized [ 3.344015] 9pnet: Installing 9P2000 support [ 3.347734] Key type dns_resolver registered [ 3.352911] registered taskstats version 1 [ 3.356132] Loading compiled-in X.509 certificates [ 3.368726] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 3.371772] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 3.381734] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 3.383781] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 3.392570] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 3.400687] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 3.518340] tegra194-pcie 14160000.pcie: Link up [ 3.521228] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 3.521459] pci_bus 0004:00: root bus resource [bus 00-ff] [ 3.521609] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 3.521885] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 3.522148] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 3.522623] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 3.523112] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 3.534566] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 3.534980] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.535467] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 3.537028] pci 0004:01:00.0: supports D1 D2 [ 3.537246] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.547588] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 3.547892] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 3.548186] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 3.548576] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.548858] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 3.549073] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 3.553184] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 3.560502] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 3.568816] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 3.579335] pcieport 0004:00:00.0: Adding to iommu group 6 [ 3.583773] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 3.589697] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 3.596117] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 3.604758] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 3.606989] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 3.615231] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.623916] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 4.739093] tegra194-pcie 141a0000.pcie: Phy link never came up [ 4.739604] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 4.739841] pci_bus 0005:00: root bus resource [bus 00-ff] [ 4.739993] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 4.740239] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 4.740448] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 4.740871] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 4.741307] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 4.760615] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 4.760946] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 4.762826] pcieport 0005:00:00.0: Adding to iommu group 7 [ 4.764087] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 4.765347] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 4.766920] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 4.767858] pci 0005:00:00.0: Removing from iommu group 7 [ 4.768170] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 4.802380] host1x 13e10000.host1x: Adding to iommu group 8 [ 4.827051] host1x 13e10000.host1x: initialized [ 4.828504] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 4.829443] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 4.830902] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 4.831729] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 4.832927] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 4.833596] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 4.835013] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 4.835613] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 4.836730] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 4.839389] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 4.849340] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 4.856001] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 4.865881] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 4.873197] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 4.882878] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 4.890137] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 4.899755] falcon 15340000.vic: Adding to iommu group 17 [ 4.915080] falcon 15340000.vic: initialized [ 4.916083] falcon 15380000.nvjpg: Adding to iommu group 17 [ 4.921907] falcon 15380000.nvjpg: initialized [ 4.922474] falcon 154c0000.nvenc: Adding to iommu group 17 [ 4.934312] falcon 154c0000.nvenc: initialized [ 4.934859] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 4.943514] falcon 15a80000.nvenc1: initialized [ 4.944086] nvdec 15480000.nvdec: Adding to iommu group 17 [ 4.955531] nvdec 15480000.nvdec: initialized [ 4.956039] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 4.965800] nvdec 15140000.nvdec1: initialized [ 4.966321] tsec 15500000.tsec: Adding to iommu group 18 [ 4.971969] tsec 15500000.tsec: initialized [ 4.972434] tsec 15100000.tsecb: Adding to iommu group 19 [ 4.980967] tsec 15100000.tsecb: initialized [ 4.985027] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.012827] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.025428] gpio-374 (wifi-enable): hogged as output/high [ 5.025691] gpio-431 (camera-control-output-low): hogged as output/low [ 5.025949] gpio-432 (camera-control-output-low): hogged as output/low [ 5.027735] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.029594] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.030318] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.031857] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.036580] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.042371] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.047870] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.056447] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.063579] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.075644] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.080521] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.086335] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.094928] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.104386] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.112048] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.119052] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.125540] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.134882] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.141126] pva 16000000.pva0: Adding to iommu group 22 [ 5.168674] pva 16000000.pva0: initialized [ 5.174033] pva 16800000.pva1: Adding to iommu group 23 [ 5.193564] pva 16800000.pva1: initialized [ 5.198652] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.212730] nvdla 15880000.nvdla0: initialized [ 5.214404] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.223117] nvdla 158c0000.nvdla1: initialized [ 5.224585] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.224951] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.225538] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.226140] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.226540] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.226846] tegra_cec 3960000.tegra_cec: probed [ 5.231312] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 5.233565] tegradc 15210000.display: Adding to iommu group 26 [ 5.234810] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 5.235477] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.235899] kfuse 3830000.kfuse: initialized [ 5.240460] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.242901] tegradc 15200000.display: Adding to iommu group 26 [ 5.245737] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.252372] tegradccommon 15200000.display-hub: dma mapping done [ 5.257808] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.258675] serial-tegra 3100000.serial: Adding to iommu group 2 [ 5.283642] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 5.293195] serial-tegra 3110000.serial: Adding to iommu group 2 [ 5.298185] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 5.307632] serial-tegra 3140000.serial: Adding to iommu group 2 [ 5.312713] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 5.333924] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 5.334410] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.336174] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 5.344225] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 5.353142] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 5.359380] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.367336] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.374526] usb usb1: Product: xHCI Host Controller [ 5.379192] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.385522] usb usb1: SerialNumber: 3610000.xhci [ 5.391166] hub 1-0:1.0: USB hub found [ 5.394335] hub 1-0:1.0: 4 ports detected [ 5.398957] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.403467] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 5.411332] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 5.419106] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 5.426917] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.434138] usb usb2: Product: xHCI Host Controller [ 5.438866] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.445073] usb usb2: SerialNumber: 3610000.xhci [ 5.450671] hub 2-0:1.0: USB hub found [ 5.453509] hub 2-0:1.0: 4 ports detected [ 5.498530] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 5.504532] i2c i2c-2: Added multiplexed i2c bus 9 [ 5.505980] i2c i2c-2: Added multiplexed i2c bus 10 [ 5.506226] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 5.519564] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 5.520727] tegra194-cpufreq ccplex: probed with BWMGR [ 5.521971] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 5.522412] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 5.522869] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 5.524240] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 5.530941] tegra194-vi5 15c10000.vi: initialized [ 5.532710] tegradc 15210000.display: disp0 connected to head1->sor [ 5.533787] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 5.533901] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 5.541071] tegradc 15210000.display: DT parsed successfully [ 5.547641] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 5.553032] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 5.553248] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.560809] mmc0: CQHCI version 5.10 [ 5.566310] nvethernet 2490000.ethernet: failed to read MDIO address [ 5.566320] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 5.566325] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 5.566329] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 5.568706] generic_infoframe_type: 0x87 [ 5.574327] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 5.574335] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 5.574341] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 5.575908] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 5.578632] tegradc 15200000.display: DT parsed successfully [ 5.592111] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 5.598364] nvethernet 2490000.ethernet: Macsec not supported [ 5.599606] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 5.602270] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 5.606250] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.610456] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 5.615517] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 5.622097] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 5.629180] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 5.636553] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.642614] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 5.651150] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 5.655698] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 5.665625] tegra-se-nvhost 15810000.se: initialized [ 5.671532] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 5.672824] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 5.674313] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 5.674318] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 5.676593] tegradc 15200000.display: probed [ 5.703197] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 5.709339] mmc0: Command Queue Engine enabled [ 5.716589] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 5.721582] mmc0: periodic cache flush enabled [ 5.728715] tegra-se-nvhost 15820000.se: initialized [ 5.734275] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.734882] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 5.741440] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 5.746058] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 5.757478] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 5.764417] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 5.772564] tegra-se-nvhost 15830000.se: initialized [ 5.776727] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 5.783979] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 5.797448] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 5.798374] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 5.870949] Console: switching to colour frame buffer device 240x67 [ 5.876781] tegradc 15200000.display: fb registered [ 5.881613] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 5.887488] tegra-se-nvhost 15840000.se: initialized [ 5.888259] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.893620] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 5.898101] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.905865] tegra_actmon d230000.actmon: in actmon_register()... [ 5.916357] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 5.922279] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 5.926571] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 5.930300] hvc_sysfs: hypervisor is not present [ 5.938145] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.950123] usb 1-2: Product: 4-Port USB 2.0 Hub [ 5.954575] usb 1-2: Manufacturer: Generic [ 5.961200] hub 1-2:1.0: USB hub found [ 5.963847] hub 1-2:1.0: 4 ports detected [ 5.965738] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 5.982253] ALSA device list: [ 5.982368] No soundcards found. [ 5.983305] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 5.990245] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 5.998999] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.005084] Extcon AUX1(HDMI) enable [ 6.009116] tegradc 15210000.display: disp1 connected to head1->sor [ 6.015375] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.022100] tegradc 15210000.display: DT parsed successfully [ 6.027754] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.035912] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.041982] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.043181] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.054705] tegradc 15210000.display: probed [ 6.060059] tegradc 15210000.display: fb registered [ 6.068397] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.072259] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.074178] Freeing unused kernel memory: 3968K [ 6.079796] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.090312] tegradc 15210000.display: blank - powerdown [ 6.091917] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.095200] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.102344] Run /init as init process [ 6.103433] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.111644] Extcon DP: HPD disabled [ 6.115252] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.122570] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.122581] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.126058] usb 2-3: Manufacturer: Generic [ 6.136899] hub 2-3:1.0: USB hub found [ 6.137793] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.145347] hub 2-3:1.0: 4 ports detected 榳ARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk 厬inding OTA work dir on external storage devices Checking whether device /dev/mmcblk?p1 exist [ 6.162809] tegradc 15200000.display: blank - powerdown [ 6.199469] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.199474] Extcon AUX1(HDMI) disable [ 6.210344] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.224210] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.225131] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.232820] Root device found: initrd [ 6.234365] Mount initrd as rootfs and enter recovery mode [ 6.238709] tegradc 15200000.display: unblank [ 6.240197] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.240395] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.246643] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.248627] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.252728] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.252732] Extcon AUX1(HDMI) enable [ 6.258382] tegra_cec 3960000.tegra_cec: physical address: 10:00. Looking for 6.26OTA543 wo9] rk raddirectory000 on0.d thispe dlayevi: sce(s):ev/ windows mmc = 247blk 0p1[ 6.28248Che5] ckiextng conwhethesp-sta/dete extv/sd?1ernal- exconistnectio n:disp-state: cable 53 state 1 [ 6.292691] Extcon HDMI: HPD enabled [ 6.296268] tegradc 1520000Device0.d /display: hdmisd?1 d: plugoes nogedt e xist Checking whether device /dev/nvme?n1p1 exist Device /dev/nvme?n1p1 does not exist [ 6.322905] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 6.323089] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. Finding OTA work dir on internal storage device [ 6.363919] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) OTA work directory /mnt/ota_work is not found on /dev/mmcblk0p1 [ 6.367442] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 6.367660] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.367844] usb 1-3: Product: Bluetooth Radio [ 6.367985] usb 1-3: Manufacturer: Realtek [ 6.368100] usb 1-3: SerialNumber: 00e04c000001 OTA work directory is not found on internal and external storage devices bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-5.0# [ 8.398284] [RCE] WARNING: core/hsp/hsp-vm.c:283 [camrtc_hsp_full_ss_isr] "VM0 issued IVC in inactive state." [ 8.398532] [RCE] WARNING: core/hsp/hsp-vm.c:283 [camrtc_hsp_full_ss_isr] "VM0 issued IVC in inactive state." [ 8.398747] [RCE] WARNING: core/hsp/hsp-vm.c:283 [camrtc_hsp_full_ss_isr] "VM0 issued IVC in inactive state." [ 34.931950] random: crng init done [ 38.002332] vdd-1v8-sd: disabling [ 38.002454] vdd-3v3-cvb: disabling [ 38.002532] vdd-1v8-cvb: disabling [ 38.002624] vdd-epb-1v0: disabling [ 38.002700] vdd-fan: disabling [ 38.002770] vdd_sys_en: disabling