[ 404.600608] nvmap_alloc_handle: PID 9602: gst-launch-1.0: WARNING: All NvMap Allocations must have a tag to identify the subsystem allocating memory.Please pass the tag to the API call NvRmMemHanldeAllocAttr() or relevant. [ 425.922250] nvmap_alloc_handle: PID 9609: gst-launch-1.0: WARNING: All NvMap Allocations must have a tag to identify the subsystem allocating memory.Please pass the tag to the API call NvRmMemHanldeAllocAttr() or relevant. [ 432.480559] nvmap_alloc_handle: PID 9615: gst-launch-1.0: WARNING: All NvMap Allocations must have a tag to identify the subsystem allocating memory.Please pass the tag to the API call NvRmMemHanldeAllocAttr() or relevant. [ 435.374306] nvmap_alloc_handle: PID 9621: gst-launch-1.0: WARNING: All NvMap Allocations must have a tag to identify the subsystem allocating memory.Please pass the tag to the API call NvRmMemHanldeAllocAttr() or relevant. [ 512.088367] nvgpu: 17000000.gv11b gk20a_channel_timeout_handler:1570 [ERR] Job on channel 509 timed out [ 512.089276] nvgpu: 17000000.gv11b nvgpu_set_error_notifier_locked:137 [ERR] error notifier set to 8 for ch 509 [ 512.192393] nvgpu: 17000000.gv11b gk20a_channel_timeout_handler:1570 [ERR] Job on channel 505 timed out [ 512.193308] nvgpu: 17000000.gv11b nvgpu_set_error_notifier_locked:137 [ERR] error notifier set to 8 for ch 505 [ 512.712324] nvgpu: 17000000.gv11b gk20a_channel_timeout_handler:1570 [ERR] Job on channel 506 timed out [ 512.713227] nvgpu: 17000000.gv11b nvgpu_set_error_notifier_locked:137 [ERR] error notifier set to 8 for ch 506 [ 512.727575] nvgpu: 17000000.gv11b gk20a_channel_timeout_handler:1570 [ERR] Job on channel 511 timed out [ 512.728912] nvgpu: 17000000.gv11b nvgpu_set_error_notifier_locked:137 [ERR] error notifier set to 8 for ch 511 [ 748.095639] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 748.095827] 0-...: (1 GPs behind) idle=7e9/140000000000002/0 softirq=71250/71266 fqs=1969 [ 748.095977] (detected by 3, t=5252 jiffies, g=37937, c=37936, q=91) [ 752.431611] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] [ 752.432102] Kernel panic - not syncing: softlockup: hung tasks [ 752.432217] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G L 4.9.140-tegra #1 [ 752.432347] Hardware name: Jetson-AGX (DT) [ 752.432425] Call trace: [ 752.432483] [] dump_backtrace+0x0/0x198 [ 752.432583] [] show_stack+0x24/0x30 [ 752.432687] [] dump_stack+0x98/0xc0 [ 752.432786] [] panic+0x11c/0x298 [ 752.432885] [] watchdog_unpark_threads+0x0/0x98 [ 752.432994] [] __hrtimer_run_queues+0xd8/0x360 [ 752.433101] [] hrtimer_interrupt+0xa8/0x1e0 [ 752.433203] [] arch_timer_handler_phys+0x38/0x58 [ 752.433318] [] handle_percpu_devid_irq+0x90/0x2b0 [ 752.433615] [] generic_handle_irq+0x34/0x50 [ 752.434052] [] __handle_domain_irq+0x68/0xc0 [ 752.434489] [] gic_handle_irq+0x5c/0xb0 [ 752.436120] [] el1_irq+0xe8/0x194 [ 752.441020] [] skb_release_all+0x20/0x40 [ 752.446359] [] consume_skb+0x38/0x118 [ 752.451436] [] arp_process+0x160/0x708 [ 752.456771] [] arp_rcv+0x118/0x1a8 [ 752.461327] [] __netif_receive_skb_core+0x3b8/0xad8 [ 752.467888] [] __netif_receive_skb+0x28/0x78 [ 752.474182] [] netif_receive_skb_internal+0x2c/0xb0 [ 752.480399] [] napi_gro_receive+0x15c/0x188 [ 752.486177] [] eqos_napi_poll_rx+0x358/0x430 [ 752.492214] [] net_rx_action+0xf4/0x358 [ 752.497810] [] __do_softirq+0x13c/0x3b0 [ 752.503237] [] irq_exit+0xd0/0x118 [ 752.507877] [] __handle_domain_irq+0x6c/0xc0 [ 752.514170] [] gic_handle_irq+0x5c/0xb0 [ 752.519681] [] el1_irq+0xe8/0x194 [ 752.524496] [] tick_nohz_idle_enter+0x44/0x68 [ 752.530275] [] cpu_startup_entry+0x90/0x200 [ 752.535970] [] rest_init+0x84/0x90 [ 752.541040] [] start_kernel+0x370/0x384 [ 752.546545] [] __primary_switched+0x80/0x94 [ 752.552238] SMP: stopping secondary CPUs [ 752.556185] Kernel Offset: disabled [ 752.559666] Memory Limit: none [ 752.562816] trusty-log panic notifier - trusty version Built: 21:16:17 Jun 25 2020 [ 752.584697] Rebooting in 5 seconds.. ÿäÿâShutdown state requested 1 Rebooting system ... ÿâ [0000.055] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.063] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.069] I> Boot-mode: Coldboot [0000.072] I> Chip revision : A02 [0000.075] I> Bootrom patch version : 15 (correctly patched) [0000.080] I> ATE fuse revision : 0x200 [0000.083] I> Ram repair fuse : 0x0 [0000.086] I> Ram Code : 0x2 [0000.089] I> rst_source : 0xb [0000.092] I> rst_level : 0x1 [0000.095] I> Boot-device: eMMC [0000.110] I> sdmmc DDR50 mode [0000.114] W> No valid slot number is found in scratch register [0000.120] W> Return default slot: _a [0000.123] I> Active Boot chain : 0 [0000.126] I> Boot-device: eMMC [0000.130] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.136] I> Temperature = 33500 [0000.139] W> Skipping boost for clk: BPMP_CPU_NIC [0000.143] W> Skipping boost for clk: BPMP_APB [0000.147] W> Skipping boost for clk: AXI_CBB [0000.151] W> Skipping boost for clk: AON_CPU_NIC [0000.156] W> Skipping boost for clk: CAN1 [0000.159] W> Skipping boost for clk: CAN2 [0000.164] I> Boot-device: eMMC [0000.166] I> Boot-device: eMMC [0000.176] I> Sdmmc: HS400 mode enabled [0000.180] I> ECC region[0]: Start:0x0, End:0x0 [0000.184] I> ECC region[1]: Start:0x0, End:0x0 [0000.189] I> ECC region[2]: Start:0x0, End:0x0 [0000.193] I> ECC region[3]: Start:0x0, End:0x0 [0000.197] I> ECC region[4]: Start:0x0, End:0x0 [0000.201] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.207] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.211] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.216] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.220] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.225] E> FAILED: Thermal config [0000.233] E> FAILED: MEMIO rail config [0000.252] I> Boot-device: eMMC [0000.261] I> sdmmc bdev is already initialized [0000.332] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0000.340] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-2dfe4beb) [0000.341] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.342] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.342] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.348] W> device prod register failed [0000.352] I> Boot-device: eMMC [0000.355] I> Boot_device: SDMMC_BOOT instance: 3 [0000.361] I> sdmmc-3 params source = boot args [0000.364] I> sdmmc bdev is already initialized [0000.368] I> sdmmc-3 params source = boot args [0000.374] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.381] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.383] W> No valid slot number is found in scratch register [0000.389] W> Return default slot: _a [0000.392] I> Active Boot chain : 0 [0000.396] I> parsing oem signed section of bpmp-fw header done [0000.401] I> bpmp-fw binary init read from storage [0000.406] I> oem authentication of bpmp-fw header done [0000.413] I> bpmp-fw binary done read from storage [0000.415] I> bpmp-fw: Authentication init Done [0000.420] I> parsing oem signed section of cpubl header done [0000.425] I> cpubl binary init read from storage [0000.430] I> bpmp-fw: Authentication Finalize Done [0000.434] I> oem authentication of cpubl header done [0000.439] I> cpubl binary done read from storage [0000.443] I> cpubl: Authentication init Done [0000.448] I> parsing oem signed section of rce header done [0000.453] I> rce binary init read from storage [0000.457] I> Relocating BR-BCT [0000.460] I> cpubl: Authentication Finalize Done [0000.465] I> oem authentication of rce header done [0000.469] I> rce binary done read from storage [0000.473] I> rce: Authentication init Done [0000.478] I> parsing oem signed section of ape header done [0000.483] I> ape binary init read from storage [0000.487] I> rce: Authentication Finalize Done [0000.492] I> oem authentication of ape header done [0000.496] I> ape binary done read from storage [0000.500] I> ape: Authentication init Done [0000.505] I> parsing oem signed section of tos header done [0000.510] I> tos binary init read from storage [0000.514] I> ape: Authentication Finalize Done [0000.519] I> oem authentication of tos header done [0000.523] I> tos binary done read from storage [0000.527] I> tos: Authentication init Done [0000.531] I> parsing oem signed section of bpmp-fw-dtb header done [0000.537] I> bpmp-fw-dtb binary init read from storage [0000.542] I> tos: Authentication Finalize Done [0000.548] I> oem authentication of bpmp-fw-dtb header done [0000.554] I> bpmp-fw-dtb binary done read from storage [0000.557] I> bpmp-fw-dtb: Authentication init Done [0000.562] I> parsing oem signed section of cpubl-dtb header done [0000.567] I> cpubl-dtb binary init read from storage [0000.572] I> bpmp-fw-dtb: Authentication Finalize Done [0000.609] I> oem authentication of cpubl-dtb header done [0000.610] I> cpubl-dtb binary done read from storage [0000.611] I> cpubl-dtb: Authentication init Done [0000.612] I> parsing oem signed section of eks header done [0000.613] I> eks binary init read from storage [0000.614] I> cpubl-dtb: Authentication Finalize Done [0000.614] I> oem authentication of eks header done [0000.618] I> eks binary done read from storage [0000.622] I> eks: Authentication init Done [0000.626] I> eks: Authentication Finalize Done [0000.630] I> EKB detected (length: 0x410) @ VA:0x5270a400 ÿäNOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:52, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized ÿá [0001.134] I> Welcome to Cboot ÿâfmon_post initialized ÿá[0001.134] I> Cboot Version: t194-18fdfe28 [0001.135] I> CPU-BL Params @ 0xf2820000 [0001.135] I> 0) Base:0x00000000 Size:0x00000000 [0001.139] I> 1) Base:0xf1100000 Size:0x00100000 [0001.143] I> 2) Base:0xf2000000 Size:0x00200000 [0001.147] I> 3) Base:0xf1200000 Size:0x00200000 [0001.152] I> 4) Base:0xf1000000 Size:0x00100000 ÿâclk_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ÿá[0001.156] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.261] I> 6) Base:0xf3800000 Size:0x00400000 [0001.266] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.270] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.275] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.279] I> 10) Base:0xf3000000 Size:0x00800000 [0001.284] I> 11) Base:0x40000000 Size:0x00040000 [0001.288] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.293] I> 13) Base:0x40046000 Size:0x00002000ÿâemc_debugfs initialized dvs_debugfs initialized fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá [0001.347] I> 14) Base:0x40048000 Size:0x00002000 [0001.352] I> 15) Base:0xac000000 Size:0x00004000 [0001.356] I> 16) Base:0x4004a000 Size:0x00002000 [0001.361] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.365] I> 18) Base:0x4004c000 Size:0x00002000 [0001.370] I> 19) Base:0xf2200000 Size:0x00600000 [0001.374] I> 20) Base:0x4004e000 Size:0x00002000 [0001.379] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.383] I> 22) Base:0x00000000 Size:0x00000000 [0001.388] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.392] I> 24) Base:0xf6000000 Size:0x02000000 [0001.397] I> 25) Base:0x40050000 Size:0x00002000 [0001.401] I> 26) Base:0x40040000 Size:0x00006000 [0001.405] I> 27) Base:0xf1800000 Size:0x00400000 [0001.410] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.414] I> 29) Base:0xf1400000 Size:0x00400000 [0001.419] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.423] I> 31) Base:0x00000000 Size:0x00000000 [0001.428] I> 32) Base:0xf8000000 Size:0x08000000 [0001.432] I> 33) Base:0x00000000 Size:0x00000000 [0001.437] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.441] I> 35) Base:0xab000000 Size:0x01000000 [0001.446] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.450] I> 37) Base:0xf2800000 Size:0x00800000 [0001.455] I> 38) Base:0x80000000 Size:0x20000000 [0001.459] I> 39) Base:0xb0000000 Size:0x08000000 [0001.463] I> 40) Base:0x00000000 Size:0x00000000 [0001.468] I> 41) Base:0x00000000 Size:0x00000000 [0001.472] I> 42) Base:0x00000000 Size:0x00000000 [0001.477] I> 43) Base:0x00000000 Size:0x00000000 [0001.481] I> 44) Base:0x00000000 Size:0x00000000 [0001.486] I> 45) Base:0x00000000 Size:0x00000000 [0001.490] GIC-SPI Target CPU: 0 [0001.493] Interrupts Init done [0001.496] calling constructors [0001.499] initializing heap [0001.502] I> Heap: [0xa06905a8 ... 0xab000000] [0001.506] initializing threads [0001.509] initializing timers [0001.512] creating bootstrap completion thread [0001.516] top of bootstrap2() [0001.519] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.523] initializing platform [0001.526] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.532] W> device prod register failed [0001.535] I> Bl_dtb @0xaaf00000 [0001.542] W> "plugin-manager" doesn't exist, creating [0001.543] W> "ids" doesn't exist, creating [0001.548] W> "connection" doesn't exist, creating [0001.552] W> "configs" doesn't exist, creating [0001.561] I> Find /i2c@3160000's alias i2c0 [0001.561] I> Reading eeprom i2c=0 address=0x50 [0001.590] I> Device at /i2c@3160000:0x50 [0001.590] I> Reading eeprom i2c=0 address=0x56 [0001.614] I> Device at /i2c@3160000:0x56 [0001.616] I> Find /i2c@3180000's alias i2c2 [0001.617] I> Reading eeprom i2c=2 address=0x54 [0001.618] E> I2C: slave not found in slaves. [0001.619] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start true. [0001.620] E> I2C_DEV: Failed to send register address 0x00000000. [0001.620] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.628] E> eeprom: Failed to read I2C slave device [0001.633] I> Eeprom read failed 0x3526070d [0001.637] I> Reading eeprom i2c=2 address=0x57 [0001.642] E> I2C: slave not found in slaves. [0001.646] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.654] E> I2C_DEV: Failed to send register address 0x00000000. [0001.659] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0001.669] E> eeprom: Failed to read I2C slave device [0001.673] I> Eeprom read failed 0x3526070d [0001.677] I> Reading eeprom i2c=2 address=0x52 [0001.682] E> I2C: slave not found in slaves. [0001.686] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.694] E> I2C_DEV: Failed to send register address 0x00000000. [0001.699] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0001.709] E> eeprom: Failed to read I2C slave device [0001.713] I> Eeprom read failed 0x3526070d [0001.719] I> Find /i2c@c240000's alias i2c1 [0001.721] I> Reading eeprom i2c=1 address=0x52 [0001.727] E> I2C: slave not found in slaves. [0001.730] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.738] E> I2C_DEV: Failed to send register address 0x00000000. [0001.743] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.753] E> eeprom: Retry to read I2C slave device. [0001.758] E> I2C: slave not found in slaves. [0001.762] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start true. [0001.770] E> I2C_DEV: Failed to send register address 0x00000000. [0001.775] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0001.785] E> eeprom: Failed to read I2C slave device [0001.789] I> Eeprom read failed 0x3526070d [0001.793] I> Reading eeprom i2c=1 address=0x50 [0001.798] E> I2C: slave not found in slaves. [0001.802] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.810] E> I2C_DEV: Failed to send register address 0x00000000. [0001.815] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.825] E> eeprom: Retry to read I2C slave device. [0001.830] E> I2C: slave not found in slaves. [0001.834] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.841] E> I2C_DEV: Failed to send register address 0x00000000. [0001.847] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.857] E> eeprom: Failed to read I2C slave device [0001.861] I> Eeprom read failed 0x3526070d [0001.865] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0001.870] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.881] I> create_pm_ids: id: 2822-0000-700-H, len: 15 [0001.887] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.898] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0001.906] W> "i2c@3160000" doesn't exist, creating [0001.909] W> "module@0x50" doesn't exist, creating [0001.914] I> Adding plugin-manager/ids/2822-0000-700=/i2c@3160000:module@0x56 [0001.921] W> "module@0x56" doesn't exist, creating [0001.928] I> Adding plugin-manager/cvm [0001.929] W> "chip-id" doesn't exist, creating [0001.933] I> Adding plugin-manager/chip-id/A02 [0001.938] I> Plugin-manager override starting [0001.943] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.951] I> node /plugin-manager/fragement-soft-wdt matches [0001.960] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.964] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0001.974] I> Disable plugin-manager status in FDT [0001.974] I> Plugin-manager override finished successfully [0001.975] I> gpio framework initialized [0001.980] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.987] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.994] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.001] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.009] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.015] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.021] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.029] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.037] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.043] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.051] I> fixed regulator driver initialized [0002.061] I> register 'maxim' power off handle [0002.062] I> virtual i2c enabled [0002.063] I> registered 'maxim,max20024' pmic [0002.065] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.072] I> Boot-device: eMMC [0002.075] I> Boot_device: SDMMC_BOOT instance: 3 [0002.083] I> sdmmc-3 params source = boot args [0002.084] I> create_pm_ids: id: 2888-0004-400-K, len: 15 [0002.089] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.100] I> create_pm_ids: id: 2822-0000-700-H, len: 15 [0002.105] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.116] I> sdmmc bdev is already initialized [0002.120] I> sdmmc-3 params source = boot args [0002.151] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.163] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.172] I> enabling 'vdd-hdmi-5v0' regulator [0002.177] I> regulator 'vdd-hdmi-5v0' already enabled [0002.177] I> hdmi cable connected [0002.179] W> set volts not configured for 'vdd-1v0' [0002.181] W> set volts not configured for 'vdd-1v8-hs' [0002.184] E> invalid display type [0002.188] E> invalid display type [0002.189] E> cannot find any other nvdisp nodes [0002.204] I> edid read success [0002.217] I> edid read success [0002.217] I> width = 640, height = 480, frequency = 25174825 [0002.218] I> width = 640, height = 480, frequency = 25174825 [0002.218] I> width = 640, height = 480, frequency = 25174825 [0002.218] I> width = 640, height = 480, frequency = 25174825 [0002.219] I> width = 2560, height = 1440, frequency = 241500000 [0002.223] I> width = 1920, height = 1080, frequency = 148351648 [0002.228] I> width = 1280, height = 720, frequency = 74175824 [0002.234] I> width = 720, height = 480, frequency = 26973026 [0002.239] I> width = 720, height = 480, frequency = 26973026 [0002.245] I> width = 1920, height = 1080, frequency = 148351648 [0002.251] I> width = 1280, height = 720, frequency = 74175824 [0002.256] I> width = 720, height = 576, frequency = 26973026 [0002.262] I> width = 720, height = 576, frequency = 26973026 [0002.267] I> width = 640, height = 480, frequency = 25174825 [0002.273] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.283] I> hdmi_enable, starting HDMI initialisation [0002.288] I> hdmi_enable, HDMI initialisation complete [0002.297] I> Load in CBoot Boot Options partition and parse it [0002.304] E> Error -9 when finding node with path /boot-configuration [0002.304] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.308] I> Hit any key to stop autoboot: 4 3 2 1 [0004.316] initializing target [0004.316] calling apps_init() [0004.317] starting app kernel_boot_app [0004.336] I> found decompressor handler: lz4-legacy [0004.337] I> decompressing BMP blob ... [0004.340] I> Kernel type = Normal [0004.341] I> Loading kernel-bootctrl from partition [0004.341] I> Loading partition kernel-bootctrl at 0xa4ac0000 from device(0x1) [0004.347] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.348] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.349] I> ########## SD boot ########## [0004.353] I> No sdcard [0004.355] I> -0 params source = [0004.358] E> Blockdev open: exit error [0004.361] E> SD boot failed, err: 724238353 [0004.365] I> ########## USB boot ########## [0004.374] W> No valid slot number is found in scratch register [0004.375] W> Return default slot: _a [0004.391] I> USB Firmware Version: 60.06 release [0004.446] I> regulator of usb2-0 already enabled [0004.453] I> regulator of usb2-1 already enabled [0004.460] I> regulator of usb2-2 already enabled [0004.469] I> enabling 'vdd-5v-sata' regulator [0005.537] I> USB 2.0 port 4 new high-speed USB device detected [0005.537] W> Change usb2 root port id to 2 [0005.537] W> Change usb2 root port id to 4 [0005.539] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9f800, cmd_ring.dma = 0xa0e9f840 [0005.539] E> slot id is 1 [0005.541] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9f800, cmd_ring.dma = 0xa0e9f840 [0005.551] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9f800, cmd_ring.dma = 0xa0e9f840 [0005.557] I> [0005.557] I> Enumerated USB Device 4971:ce07 [0005.561] I> [0005.564] I> Max LUN = 0 [0005.568] I> Vendor Identification : STECH [0005.570] I> Product Identification : Simple Drive [0005.575] I> Product Revision Level : 8.59 [0005.584] I> READ CAPACITY - last LBA = 1953525167, 953869MB [0005.585] I> -0 params source = [0005.620] W> Cannot find any partition table for 00050000 [0005.620] I> Detect filesystem [0005.624] I> fs_detect:173: Unsupported or no filesystem present [0005.624] E> USB boot failed, err: 724238349 [0005.624] I> ########## Fixed storage boot ########## [0005.625] I> Already published: 00010003 [0005.625] I> Look for boot partition [0005.625] I> Fallback: assuming 0th partition is boot partition [0005.631] I> Detect filesystem [0005.658] I> Loading extlinux.conf ... [0005.658] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0005.701] I> L4T boot options [0005.701] I> [1]: "primary kernel" [0005.702] I> Enter choice: [0008.703] I> Continuing with default option: 1 [0008.703] I> Loading kernel sig file from rootfs ... [0008.703] I> rootfs path: /sdmmc_user/boot/Image.sig [0008.722] I> Loading kernel binary from rootfs ... [0008.722] I> rootfs path: /sdmmc_user/boot/Image [0008.964] I> Validate kernel ... [0008.964] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0009.293] I> No kernel-dtb binary path [0009.294] W> No valid slot number is found in scratch register [0009.294] W> Return default slot: _a [0009.294] I> A/B: bin_type (38) slot 0 [0009.295] I> Loading kernel-dtb from partition [0009.295] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0009.304] I> Validate kernel-dtb ... [0009.304] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0009.309] I> Loading ramdisk from rootfs ... [0009.310] I> rootfs path: /sdmmc_user/boot/initrd [0009.363] I> Kernel hdr @0xa4ac0000 [0009.363] I> Kernel dtb @0x90000000 [0009.363] I> decompressor handler not found [0009.363] I> Copying kernel image (34330640 bytes) from 0xa4ac0000 to 0x80080000 ... [0009.374] I> Done [0009.374] I> Updated bpmp info to DTB [0009.375] I> Ramdisk: Base: 0x92000000; Size: 0x54ecaf [0009.376] I> Updated initrd info to DTB [0009.376] W> WARN: Fail to override "console=none" in commandline [0009.377] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0009.383] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0009.390] W> No valid slot number is found in scratch register [0009.396] W> Return default slot: _a [0009.399] I> Active slot suffix: [0009.402] I> add_boot_slot_suffix: slot_suffix = [0009.407] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt tegra_fbmem=0x800000@0xa069c000 lut_mem=0x2008@0xa0697000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0009.437] I> Updated bootarg info to DTB [0009.440] W> MAC addr invalid! [0009.443] E> Failed to get WIFI MAC address [0009.447] W> MAC addr invalid! [0009.450] E> Failed to get Bluetooth MAC address [0009.455] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e5:91:29 [0009.461] W> "plugin-manager" doesn't exist, creating [0009.466] I> Adding /chosen/plugin-manager/cvm [0009.470] W> "chip-id" doesn't exist, creating [0009.474] I> Adding /chosen/plugin-manager/chip-id [0009.479] W> "configs" doesn't exist, creating [0009.483] I> Adding /chosen/plugin-manager/configs [0009.488] W> "ids" doesn't exist, creating [0009.492] I> Adding /chosen/plugin-manager/ids [0009.496] W> "odm-data" doesn't exist, creating [0009.500] I> Adding /chosen/plugin-manager/odm-data [0009.508] W> "memory" doesn't exist, creating [0009.510] I> [0] START: 0x80000000, END: 0xac000000 [0009.514] I> [1] START: 0xac004000, END: 0xf09d0000 [0009.519] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0009.523] I> dram_block larger than 80000000 [0009.527] I> [3] START: 0x100000000, END: 0x880000000 [0009.532] I> added [base:0x80000000, size:0x2c000000] to /memory [0009.538] I> added [base:0xac200000, size:0x44600000] to /memory [0009.544] I> added [base:0x100000000, size:0x780000000] to /memory [0009.551] I> Updated memory info to DTB [0009.554] E> add_disp_param: failed to get display params for du=1 [0009.560] W> "reset" doesn't exist, creating [0009.565] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0009.569] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0009.573] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0009.578] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0009.583] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0009.588] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0009.592] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0009.597] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0009.603] W> "misc-data" doesn't exist, creating [0009.606] I> Boot-device: eMMC [0009.609] I> Add boot-sdmmc to plugin-manager/misc-data [0009.614] I> Add storage-sdmmc to plugin-manager/misc-data [0009.620] W> Unknown storage device [0009.623] I> Add serial number:1420920042359 as DT property [0009.629] I> Plugin-manager override starting [0009.633] I> node /plugin-manager/fragement-tegra-wdt-en matches [0009.640] I> node /plugin-manager/fragement-soft-wdt matches [0009.647] I> node /plugin-manager/fragment-pcie-c5-rp matches [0009.652] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0009.664] I> Disable plugin-manager status in FDT [0009.664] I> Plugin-manager override finished successfully [0009.666] I> tegrabl_load_kernel_and_dtb: Done [0009.688] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3357) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 25 21:22:12 PDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069c000 [ 0.000000] Found lut_mem: 00002008@a0697000 ÿâWARNING: pll_d3 has no dyn ramp ÿá[ 6.537088] cgroup: cgroup2: unknown option "nsdelegate" [ 7.745734] using random self ethernet address [ 7.745918] using random host ethernet address [ 7.879314] random: crng init done [ 7.879457] random: 7 urandom warning(s) missed due to ratelimiting [ 8.326359] using random self ethernet address [ 8.326525] using random host ethernet address [ 9.148254] scsi 2:0:0:0: Direct-Access STECH Simple Drive 8.59 PQ: 0 ANSI: 0 [ 9.156864] sd 2:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB) [ 9.157551] sd 2:0:0:0: [sda] Write Protect is off [ 9.158236] sd 2:0:0:0: [sda] Asking for cache data failed [ 9.158240] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 9.215143] sd 2:0:0:0: [sda] Attached SCSI disk Ubuntu 18.04.4 LTS agx ttyTCU0 agx login: [ 43.087446] INFO: rcu_preempt self-detected stall on CPU [ 43.087670] 0-...: (6 GPs behind) idle=1a5/140000000000002/0 softirq=3453/3453 fqs=2121 [ 43.087836] (t=5250 jiffies g=349 c=348 q=722) [ 47.395410] INFO: rcu_sched detected stalls on CPUs/tasks: [ 47.395550] 0-...: (1 GPs behind) idle=1a5/140000000000002/0 softirq=3451/3453 fqs=2039 [ 47.395687] (detected by 1, t=5252 jiffies, g=7, c=6, q=15) [ 150.828464] systemd-shutdow: 48 output lines suppressed due to ratelimiting [ 151.923590] CPU1: shutdown [ 151.981525] CPU2: shutdown [ 152.047513] CPU3: shutdown [ 152.125080] CPU4: shutdown [ 152.180833] CPU5: shutdown [ 152.248257] CPU6: shutdown [ 152.312907] CPU7: shutdown [ 152.348263] reboot: Power down ÿäÿâShutdown state requested 0 Shutting down system ...