root@nvidia-desktop:/home/nvidia# export enableCamPclLogs=5 root@nvidia-desktop:/home/nvidia# export enableCamScfLogs=5 root@nvidia-desktop:/home/nvidia# /usr/sbin/nvargus-daemon === NVIDIA Libargus Camera Service (0.97.3)=== Listening for connections... ^Z [1]+ Stopped /usr/sbin/nvargus-daemon root@nvidia-desktop:/home/nvidia# bg [1]+ /usr/sbin/nvargus-daemon & root@nvidia-desktop:/home/nvidia# nvgstcapture-1.0 Encoder null, cannot set bitrate! Encoder Profile = High Supported resolutions in case of ARGUS Camera (2) : 640x480 (3) : 1280x720 (4) : 1920x1080 (5) : 2104x1560 (6) : 2592x1944 (7) : 2616x1472 (8) : 3840x2160 (9) : 3896x2192 (10): 4208x3120 (11): 5632x3168 (12): 5632x4224 Runtime ARGUS Camera Commands: Help : 'h' Quit : 'q' Set Capture Mode: mo: (1): image (2): video Get Capture Mode: gmo Set sensor orientation: so: (0): none (1): Rotate counter-clockwise 90 degrees (2): Rotate 180 degrees (3): Rotate clockwise 90 degrees Get sensor orientation: gso Set sensor mode: smo: e.g., smo:1 Get sensor mode: gsmo Set Whitebalance Mode: wb: (0): off (1): auto (2): incandescent (3): fluorescent (4): warm-fluorescent (5): daylight (6): cloudy-daylight (7): twilight (8): shade (9): manual Get Whitebalance Mode: gwb Set Saturation (0 to 2): st: e.g., st:1.25 Get Saturation: gst Set Exposure Compensation (-2 to 2): ec: e.g., ec:-2 Get Exposure Compensation: gec Set Auto Whitebalance Lock: awbl: e.g., awbl:0 Get Auto Whitebalance Lock: awbl Set Auto Exposure Lock: ael: e.g., ael:0 Get Auto Exposure Lock: gael Set TNR Mode: tnrm: e.g., tnrm:1 (0): OFF (1): FAST (2): HIGH QUALITY Get TNR Mode: gtnrm Set TNR Strength (-1 to 1): tnrs: e.g., tnrs:0.5 Get TNR Strength: gtnrs Set EE Mode: eem: e.g., eem:1 (0): OFF (1): FAST (2): HIGH QUALITY Get EE Mode: geem Set EE Strength (-1 to 1): ees: e.g., ees:0.5 Get EE Strength: gees Set Auto Exposure Anti-Banding (0 to 3): aeab: e.g., aeab:2 (0): OFF (1): MODE AUTO (2): MODE 50HZ (3): MODE 60HZ Get Auto Exposure Anti-Banding: gaeab Set Gain Range: gr: e.g., gr:1 16 Get Gain Range: ggr Set Exposure Time Range: etr: e.g., etr:34000 35000 Get Exposure Time Range: getr Set ISP Digital Gain Range: dgr: e.g., dgr:2 152 Get ISP Digital Gain Range: gdgr Capture: enter 'j' OR followed by a timer (e.g., jx5000, capture after 5 seconds) OR followed by multishot count (e.g., j:6, capture 6 images) timer/multihot values are optional, capture defaults to single shot with timer=0s Start Recording : enter '1' Stop Recording : enter '0' Video snapshot : enter '2' (While recording video) Get Preview Resolution: gpcr Get Image Capture Resolution: gicr Get Video Capture Resolution: gvcr Runtime encoder configuration options: Set Encoding Bit-rate(in bytes): br: e.g., br:4000000 Get Encoding Bit-rate(in bytes): gbr Set Encoding Profile(only for H.264): ep: e.g., ep:1 (0): Baseline (1): Main (2): High Get Encoding Profile(only for H.264): gep Force IDR Frame on video Encoder(only for H.264): Enter 'f' bitrate = 4000000 Encoder Profile = High Encoder control-rate = 1 Encoder EnableTwopassCBR = 0 Opening in BLOCKING MODE ** Message: 10:02:02.145: iterating capture loop .... NvMMLiteOpen : Block : BlockType = 4 ===== NVMEDIA: NVENC ===== === nvgstcapture-1.0[8016]: Connection established (7F8D1891D0)Thread 1 getting next capture Thread 1 is waiting NvMMLiteBlockCreate : Block : BlockType = 4 Thread 2 getting next capture Thread 2 is waiting Thread 3 getting next capture Thread 3 is waiting Thread 4 getting next capture Thread 4 is waiting Thread 5 getting next capture Thread 5 is waiting Thread 6 getting next capture Thread 6 is waiting Thread 7 getting next capture Thread 7 is waiting Thread 8 getting next capture Thread 8 is waiting Thread 9 getting next capture Thread 9 is waiting Thread 10 getting next capture Thread 10 is waiting Thread 11 getting next capture Thread 11 is waiting Thread 12 getting next capture Thread 12 is waiting Starting services... Worker thread IspHw statsComplete start Worker thread IspHw frameComplete start Worker thread CaptureScheduler checkFramePending start Worker thread CaptureScheduler frameStart start Worker thread V4L2CaptureScheduler checkCaptureComplete start Worker thread V4L2CaptureScheduler issueCaptures start Worker thread PS handleRequests start getInstance: s_instance(0x7f8861dc60) getInstance: s_instance(0x7f8861dc60) subscribe: SensorType(gyroscope) subscribe: create SensorType(gyroscope) sensor(0x7f88620180) subscribe: SensorType(accelerometer) subscribe: create SensorType(accelerometer) sensor(0x7f886256e0) AC plugin not present: dlopen "acplugin.so", acplugin.so: cannot open shared object file: No such file or directory Services are started NvPclSetHotplugCallback: ++++++++++++++++++++++ ---- Imager: Calibration blob file handling supported in this build ---- NvPclHwGetModuleList: OFParserListModules Succeeded OFParserListModules: module list: /proc/device-tree/tegra-camera-platform/modules/module0 NvPclHwGetModuleList: WARNING: Could not map module to ISP config string NvPclHwGetModuleList: No module data found NvPclHwPrintModuleDefinition -- Name: og02b10_front_H64A2B NvPclHwPrintModuleDefinition -- Position: 0 NvPclHwPrintModuleDefinition -- CalibrationData Found: 1 NvPclHwPrintCameraSubModule -- HwCamSubModule[0].Name: v4l2_sensor NvPclHwPrintCameraSubModule -- HwCamSubModule[0].DevName: gnvi2ccam 2-0069 NvPclHwGetModuleList: OFParserListModules Succeeded NvPclModuleListInitialize: NvPclModule list[0]: og02b10_front_H64A2B position0 NvPclHwScanExternalCameras -- adding video0 to discover list NvPclHwScanExternalCameras -- adding video0 to discover list NvPclHwScanExternalCameras -- adding video0 to discover list getHotplugMonitor: Getting hotplug monitor instance initializeHotplug++ hotPlugfunc ++ addWatch: Watch added wd='1' CheckProcDTExists: INFO: accessing /proc/device-tree/tegra-virtual-camera-platform/modules/module0/drivernode1; No such file or directory OFParserGetVirtualDevice: virtual device driver node not found in proc device-tree: /proc/device-tree/tegra-virtual-camera-platform/modules/module0/drivernode1 CheckProcDTExists: INFO: accessing /proc/device-tree/tegra-virtual-camera-platform/modules/module1/drivernode0; No such file or directory OFParserGetVirtualDevice: virtual device driver node not found in proc device-tree: /proc/device-tree/tegra-virtual-camera-platform/modules/module1/drivernode0 setHotplugCallback: Registered new callback client NvPclSetHotplugCallback: ---------------------- hotPlugfunc: reading from inotify FD, Thread waiting NvPclOpen: ++++++++++++++++++++++ NvPclStateControllerOpen: Found GUID 0 match at index[0] NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8853c5b0 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f885af190 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f88548440 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f881eab60 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f8866ea20 NvPclHwInitializeModule: allocate overrides pathname @ 0x7f88671d30 LoadOverridesFile: looking for override file [/Calib/camera_override.isp] 1/16 CheckOverridesPermissions: stat(/Calib/camera_override.isp) call failed LoadOverridesFile: looking for override file [/data/vendor/nvcam/settings/camera_overrides.isp] 2/16 CheckOverridesPermissions: stat(/data/vendor/nvcam/settings/camera_overrides.isp) call failed LoadOverridesFile: looking for override file [/opt/nvidia/nvcam/settings/camera_overrides.isp] 3/16 CheckOverridesPermissions: stat(/opt/nvidia/nvcam/settings/camera_overrides.isp) call failed LoadOverridesFile: looking for override file [/var/nvidia/nvcam/settings/camera_overrides.isp] 4/16 CheckOverridesPermissions: stat(/var/nvidia/nvcam/settings/camera_overrides.isp) call failed LoadOverridesFile: looking for override file [/data/vendor/nvcam/camera_overrides.isp] 5/16 CheckOverridesPermissions: stat(/data/vendor/nvcam/camera_overrides.isp) call failed LoadOverridesFile: looking for override file [/data/vendor/nvcam/settings/og02b10_front_H64A2B.isp] 6/16 CheckOverridesPermissions: stat(/data/vendor/nvcam/settings/og02b10_front_H64A2B.isp) call failed LoadOverridesFile: looking for override file [/opt/nvidia/nvcam/settings/og02b10_front_H64A2B.isp] 7/16 CheckOverridesPermissions: stat(/opt/nvidia/nvcam/settings/og02b10_front_H64A2B.isp) call failed LoadOverridesFile: looking for override file [/var/nvidia/nvcam/settings/og02b10_front_H64A2B.isp] 8/16 CheckOverridesPermissions: override file [/var/nvidia/nvcam/settings/og02b10_front_H64A2B.isp] has correct owner and mode ---- imager: Found override file [/var/nvidia/nvcam/settings/og02b10_front_H64A2B.isp]. ---- Imager: looking for override file [/mnt/factory/camera/factory.bin] 1/16 Imager: looking for override file [/Calib/factory.bin] 2/16 Imager: looking for override file [/Calib/calibration.bin] 3/16 Imager: looking for override file [(null)] 4/16 Imager: looking for override file [(null)] 5/16 Imager: looking for override file [(null)] 6/16 Imager: looking for override file [(null)] 7/16 Imager: looking for override file [(null)] 8/16 Imager: looking for override file [(null)] 9/16 Imager: looking for override file [(null)] 10/16 Imager: looking for override file [(null)] 11/16 Imager: looking for override file [(null)] 12/16 Imager: looking for override file [(null)] 13/16 Imager: looking for override file [(null)] 14/16 Imager: looking for override file [(null)] 15/16 Imager: looking for override file [(null)] 16/16 Imager: looking for override file [/data/vendor/nvcam/settings/factory.bin] 1/16 Imager: looking for override file [/data/vendor/nvcam/settings/og02b10_front_H64A2B.bin] 2/16 Imager: looking for override file [/opt/nvidia/nvcam/settings/og02b10_front_H64A2B.bin] 3/16 Imager: looking for override file [/var/nvidia/nvcam/settings/og02b10_front_H64A2B.bin] 4/16 Imager: looking for override file [(null)] 5/16 Imager: looking for override file [(null)] 6/16 Imager: looking for override file [(null)] 7/16 Imager: looking for override file [(null)] 8/16 Imager: looking for override file [(null)] 9/16 Imager: looking for override file [(null)] 10/16 Imager: looking for override file [(null)] 11/16 Imager: looking for override file [(null)] 12/16 Imager: looking for override file [(null)] 13/16 Imager: looking for override file [(null)] 14/16 Imager: looking for override file [(null)] 15/16 Imager: looking for override file [(null)] 16/16 NvPclCreateDriver: Found NvPcl Driver Hal dev_name match (v4l2_sensor) NvPclCreateDriver: Found a Driver name match (v4l2_sensor) NvPclConnectDrivers: hImager was NULL, creating new imager NvPclInitializeDrivers: v4l2_sensor ++++++++++++++++++ OFDPropertyGetString: could not read property [devnode-bus] OFDPropertyGetString: could not read property [use_decibel_gain] OFDPropertyGetString: could not read property [use_sensor_mode_id] OFDPropertyGetString: could not read property [delayed_gain] OFDPropertyCopyToLong: could not read property [has-eeprom] OFDPropertyGetString: could not read property [type] loadSubType: Sensor type missing in DT, 206 OFDPropertyCopyToLong: could not read property [set_mode_delay_ms] OFDPropertyCopyToLong: could not read property [mode0.vc_id] OFDPropertyCopyToLongLong: could not read property [mode0.serdes_pix_clk_hz] OFDPropertyCopyToLongLong: could not read property [mode0.exp_time_1h] OFDPropertyCopyToFloat: could not read property [mode0.gain_step_pitch] OFDPropertyCopyToLong: could not read property [mode0.embedded_metadata_width] OFDPropertyGetString: could not read property [mode0.x_start] OFDPropertyGetString: could not read property [mode0.y_start] OFDPropertyGetString: could not read property [mode0.x_end] OFDPropertyGetString: could not read property [mode0.y_end] OFDPropertyGetString: could not read property [mode0.h_scaling] OFDPropertyGetString: could not read property [mode0.v_scaling] initialize: Loaded Driver: 1 Modes Available-------------- NvPclInitializeDrivers: v4l2_sensor ------------------ NvPclOpen: ---------------------- CAM: serial no file already exists, skips storing againLSC: LSC surface is not based on full res! === nvgstcapture-1.0[8016]: CameraProvider initialized (0x7f886553c0)sourceRegistry[0] assigned ispRegistry[0] assigned Using Source GUID 0 Worker thread ViCsiHw frameComplete start Worker thread ViCsiHw frameStart start NvPclPowerOn: +++++++++++ NvPclPowerOn: ----------- Using ISP A NvPHSSendThroughputHints: sensorId=0, m_usecase=4, m_type=2, m_value=4294967295, m_timeout_ms=1000 CAM: serial no file already exists, skips storing againLSC: LSC surface is not based on full res! AC plugin not present: dlopen "acplugin.so", acplugin.so: cannot open shared object file: No such file or directory No library found, disabling AC plugin. Worker thread CaptureDispatcher start GST_ARGUS: Creating output stream CONSUMER: Waiting until producer is connected... GST_ARGUS: Available Sensor modes : GST_ARGUS: 1600 x 1300 FR = 59.999999 fps Duration = 16666667 ; Analog Gain range min 0.000001, max 511.000000; Exposure Range min 1000, max 65535000000000; GST_ARGUS: Running with following settings: Camera index = 0 Camera mode = 0 Output Stream W = 1600 H = 1300 seconds to Run = 0 Frame Rate = 59.999999 GST_ARGUS: PowerService: requested_clock_Hz=4032000 GST_ARGUS: Setup Complete, Starting captures for 0 seconds GST_ARGUS: Starting repeat capture requests. CONSUMER: Producer has connected; continuing. Session::updatePerfHints() updatePerfHints(): guid=0ll, CaptureIntent=1 updatePerfHints(): NvCameraCoreUseCase_Preview NvPHSSendThroughputHints: sensorId=0, m_usecase=4, m_type=1, m_value=30, m_timeout_ms=1000 NvPHSSendThroughputHints: sensorId=0, m_usecase=4, m_type=15, m_value=0, m_timeout_ms=1000 Must retain AR: in=1600x1300 out=640x480 enclosing=(0.00,0.00, 1.00,1.00) firstClip=(0.00,0.00, 1.08,1.00) No output buffers for 2 No output buffers for 1 InstructionList: + GraphSettings | SensorMode: 1600x1300 BayerS16RGGB 60.0fps | output 0: 640x480 BL U8_V8_ER 420SP | inputClipRect 0: (0.00,0.00, 1.00,1.00) | sharedIsp + Instruction List | id: 0 + 0: CCDataSetupStage | EstimatedIspOutLatencyFrames: 6 | NumConcurrentCaptures: 1 | UnprocessedYuvBufferMask: 0 + 1: ACSynchronizeStage + 2: AeAfApplyStage + 3: AcPluginStage | operation: opApply + 4: AcMergeStage | IspIn: [1600, 1300] | IspOut0: [1600, 1300] | IspOut1: [0, 0] | IspOut2: [640, 520] + 5: TempBufferAcquireStage | Buffer Index: 4 | BufferRequirements: 1600x1300 Pitch BayerS16RGGB + 6: TempBufferAcquireStage | Buffer Index: 5 | BufferRequirements: 1600x1 Pitch NonColor8 + 7: SensorCaptureStage | Master: 1 | Source GUID: 0 | Output Buffer: 4 | SensorMetadata Buffer: 5 + 8: TempBufferAcquireStage | Buffer Index: 2 | BufferRequirements: 1600x1300 BL U8_V8_ER 420SP + 9: StatsBufferAcquireStage | Buffer Index: 1 | BufferRequirements: 640x520 Pitch U8_V8_ER 420SP + 10: TempBufferAcquireStage | Buffer Index: 3 | BufferRequirements: 524288x1 Pitch NonColor8 + 11: MemoryToISPCaptureStage | Master: 1 | Input Buffer: 4 | Output A Buffer: 2 | Output Thumb Buffer: 1 | Output IspStats Buffer: 3 | Source GUID: 0 + 12: BufferReturnStage | Output A Buffer: 4 + 13: StatsUpdateStage | Output Meta Buffer: 5 | Output IspStats Buffer: 3 + 14: BufferReturnStage | Output A Buffer: 5 + 15: BufferReturnStage | Output A Buffer: 3 + 16: AcPluginStage | operation: opAnalyze + 17: AfAnalysisStage + 18: BlitStage | Input Buffer: 2 | Output Buffer: 0 | Filter: Smart | Transform: None | Src Rect: [0, 0, 1600, 1300] | Dst Rect: Not used + 19: MonitorStage + 20: ExifStage + 21: MakerNoteStage + 22: BufferReturnStage | Output A Buffer: 2 + 23: BufferReturnStage | Output A Buffer: 0 + 24: MetadataReturnStage + 25: PerfStatsStage Created fiber 0x7f34000b20 for CC 101 globalID 101 session 0 Thread 1 is working on CC 101 session 0 globalID 101 step 0 CC 101 session 0 completed step 0 in fiber 0x7f34000b20 cc 101(1) session 0 runCount=0 runIspOut=0, latest ccId=0 CC 101 session 0 completed step 1 in fiber 0x7f34000b20 NV AE and AfApply algorithms are active. CC 101 session 0 completed step 2 in fiber 0x7f34000b20 CC 101 session 0 completed step 3 in fiber 0x7f34000b20 Session::updatePerfHints() updatePerfHints(): guid=0ll, CaptureIntent=1 updatePerfHints(): NvCameraCoreUseCase_Preview NvPHSSendThroughputHints: sensorId=0, m_usecase=4, m_type=1, m_value=30, m_timeout_ms=1000 NvPHSSendThroughputHints: sensorId=0, m_usecase=4, m_type=15, m_value=0, m_timeout_ms=1000 Created fiber 0x7f34000dd0 for CC 102 globalID 102 session 0 Thread 2 is working on CC 102 session 0 globalID 102 step 0 CC 102 session 0 completed step 0 in fiber 0x7f34000dd0 cc 102(2) session 0 runCount=1 runIspOut=0, latest ccId=0 CC 102 session 0 completed step 1 in fiber 0x7f34000dd0 NV AE and AfApply algorithms are active. CC 102 session 0 completed step 2 in fiber 0x7f34000dd0 CC 102 session 0 completed step 3 in fiber 0x7f34000dd0 CC 102 session 0 stalled step 4 in fiber 0x7f34000dd0 FiberScheduler: cc 102, session 0 fiber 0x7f34000dd0 not ready to execute stalled on 0x7f887a8120 stage... Thread 2 getting next capture Thread 2 is waiting Thread 3 is waiting Session::updatePerfHints() updatePerfHints(): guid=0ll, CaptureIntent=1 updatePerfHints(): NvCameraCoreUseCase_Preview NvPHSSendThroughputHints: sensorId=0, m_usecase=4, m_type=1, m_value=30, m_timeout_ms=1000 NvPHSSendThroughputHints: sensorId=0, m_usecase=4, m_type=15, m_value=0, m_timeout_ms=1000 CC 101 session 0 completed step 4 in fiber 0x7f34000b20Thread 4 is working on CC 102 session 0 globalID 102 step 4 CC 102 session 0 completed step 4 in fiber 0x7f34000dd0 CC 102 session 0 completed step 5 in fiber 0x7f34000dd0 CC 102 session 0 completed step 6 in fiber 0x7f34000dd0 CC 102 session 0 stalled step 7 in fiber 0x7f34000dd0 FiberScheduler: cc 102, session 0 fiber 0x7f34000dd0 not ready to execute stalled on 0x7f887a91e0 stage... Thread 5 is waiting Thread 4 getting next capture Thread 4 is waiting CC 101 session 0 completed step 5 in fiber 0x7f34000b20 CC 101 session 0 completed step 6 in fiber 0x7f34000b20 Thread 6 is working on CC 102 session 0 globalID 102 step 7 CC 102 session 0 processing step 7 in fiber 0x7f34000dd0 FiberScheduler: cc 102, session 0, fiber 0x7f34000dd0 in progress... Thread 6 getting next capture Thread 7 is waiting Thread 6 is waiting CC 101 session 0 processing step 7 in fiber 0x7f34000b20 FiberScheduler: cc 101, session 0, fiber 0x7f34000b20 in progress... Thread 8 is waiting Thread 1 getting next capture Thread 1 is waiting NvPclSettingsUpdate: Sending Updated Settings through PCL NvPclSettingsApply: Applying last settings through PCL apply:+++++++++++++++++++++++ writeMode: Target mode Id(0): Resolution 1600x1300 (NvCamV4l2) Error BadParameter: 0x30314752 pixelFormat not found under current active buffer type (in /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function setActivePixelFormat(), line 1459) (NvOdmDevice) Error BadParameter: (propagating from dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorViCsi.cpp, function enableStreamingConfiguration(), line 2115) (NvOdmDevice) Error BadParameter: enableStreamingConfiguration FAILED (in dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorBase.cpp, function writeMode(), line 328) (NvOdmDevice) Error BadParameter: (propagating from dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorViCsi.cpp, function apply(), line 169) NvPclSettingsApply: Reading PCL settings NvPclSettingsUpdate: Sending Updated Settings through PCL NvPclSettingsApply: Applying last settings through PCL apply:+++++++++++++++++++++++ writeFrameRate: INPUT frameRate:30.000002 writeGain: INPUT gainCtrl:f42a3 analogGain:1.000100 writeExposure: INPUT expTime:0.033330 updateOutputSettings: OUTPUT frameRate:30.000002 updateOutputSettings: OUTPUT analogGain:1.000099 updateOutputSettings: OUTPUT expTime:0.033330 (NvCamV4l2) Error InvalidState: Invalid active Mode Size (in /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function streamControl(), line 1655) (NvOdmDevice) Error InvalidState: (propagating from dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorViCsi.cpp, function apply(), line 205) NvPclSettingsApply: Reading PCL settings PowerServiceHw:addRequest: table size: before: 0, after:1 request table for ISP 0: req[0]: output1 width=0, output1 height=0, output1 Bpp=0 req[0]: output2 width=0, output2 height=0, output2 Bpp=0 req[0]: input width=1600, input height=1300, input Bpp=10 req[0]: output width=1600, output height=1300, output Bpp=16 req[0]: input fps=60 req[0]: guID=0, stage type=MemIspCapture req[0]: clock=0 Hz, iso bw=0 KB/s, non-iso bw=518220 KB/s req[450]: timeout=0 PowerServiceHwIsp:setLaBw: m_bwVal_Iso=0 and m_bwVal_NonIso=518220 KBpS PowerServiceCore:setCameraBw: totalNonIsoBw=518220 NvPclSettingsUpdate: Sending Updated Settings through PCL NvPclSettingsApply: Applying last settings through PCL apply:+++++++++++++++++++++++ writeMode: Target mode Id(0): Resolution 1600x1300 (NvCamV4l2) Error BadParameter: 0x30314752 pixelFormat not found under current active buffer type (in /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function setActivePixelFormat(), line 1459) (NvOdmDevice) Error BadParameter: (propagating from dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorViCsi.cpp, function enableStreamingConfiguration(), line 2115) (NvOdmDevice) Error BadParameter: enableStreamingConfiguration FAILED (in dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorBase.cpp, function writeMode(), line 328) (NvOdmDevice) Error BadParameter: (propagating from dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorViCsi.cpp, function apply(), line 169) NvPclSettingsApply: Reading PCL settings NvPclSettingsUpdate: Sending Updated Settings through PCL NvPclSettingsApply: Applying last settings through PCL apply:+++++++++++++++++++++++ (NvCamV4l2) Error InvalidState: Invalid active Mode Size (in /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function streamControl(), line 1655) (NvOdmDevice) Error InvalidState: (propagating from dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorViCsi.cpp, function apply(), line 205) NvPclSettingsApply: Reading PCL settings NvPclSettingsUpdate: Sending Updated Settings through PCL NvPclSettingsApply: Applying last settings through PCL apply:+++++++++++++++++++++++ (NvCamV4l2) Error InvalidState: Invalid active Mode Size (in /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function streamControl(), line 1655) (NvOdmDevice) Error InvalidState: (propagating from dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorViCsi.cpp, function apply(), line 205) NvPclSettingsApply: Reading PCL settings NvPclSettingsUpdate: Sending Updated Settings through PCL NvPclSettingsApply: Applying last settings through PCL apply:+++++++++++++++++++++++ (NvCamV4l2) Error InvalidState: Invalid active Mode Size (in /dvs/git/dirty/git-master_linux/camera/utils/nvcamv4l2/v4l2_device.cpp, function streamControl(), line 1655) (NvOdmDevice) Error InvalidState: (propagating from dvs/git/dirty/git-master_linux/camera-partner/imager/src/devices/V4L2SensorViCsi.cpp, function apply(), line 205) NvPclSettingsApply: Reading PCL settings (NvCapture) Error Timeout: capture waiting for status timeout (in /dvs/git/dirty/git-master_linux/camera/capture/nvcapture/capture_hw_linux.c, function NvCaptureLinuxGetCaptureStatus(), line 362) (NvCapture) Error Timeout: (propagating from /dvs/git/dirty/git-master_linux/camera/capture/nvcapture/capture.c, function NvCaptureDequeue(), line 1055) SCF: Error Timeout: (propagating from src/services/capture/NvCaptureViCsiHw.cpp, function waitCsiFrameEnd(), line 887) SCF: Error InvalidState: Timeout waiting on frame end sensor guid 0, capture sequence ID = 1, channel = 1/1 (in src/services/capture/NvCaptureViCsiHw.cpp, function waitCsiFrameEnd(), line 894) SCF: Error InvalidState: Something went wrong with waiting on frame end (in src/services/capture/NvCaptureViCsiHw.cpp, function waitCsiFrameEnd(), line 975) SCF: Error InvalidState: Something went wrong with waiting on frame end (in src/services/capture/NvCaptureViCsiHw.cpp, function waitCsiFrameEnd(), line 975) SCF: Error InvalidState: Timeout waiting on frame start sensor guid 0, capture sequence ID = 1 (in src/services/capture/NvCaptureViCsiHw.cpp, function waitCsiFrameStart(), line 1002) SCF: Error InvalidState: Something went wrong with waiting on frame start (in src/services/capture/NvCaptureViCsiHw.cpp, function waitCsiFrameStart(), line 1057) SCF: Error InvalidState: Something went wrong with waiting on frame start (in src/services/capture/NvCaptureViCsiHw.cpp, function waitCsiFrameStart(), line 1057) FiberScheduler: cc 101, session 0, fiber 0x7f34000b20 aborted in async operation FiberScheduler: fiber 0x7f34000b20 exiting disposing CC 101 Session 0 Thread 9 is working on CC 103 session 0 globalID 103 step 0 Thread 10 is waiting Created fiber 0x7f34000f70 for CC 103 globalID 103 session 0 CC 103 session 0 completed step 0 in fiber 0x7f34000f70 cc 103(3) session 0 runCount=2 runIspOut=0, latest ccId=0 CC 103 session 0 completed step 1 in fiber 0x7f34000f70 NV AE and AfApply algorithms are active. CC 103 session 0 completed step 2 in fiber 0x7f34000f70 CC 103 session 0 completed step 3 in fiber 0x7f34000f70 CC 103 session 0 completed step 4 in fiber 0x7f34000f70 Session::updatePerfHints() updatePerfHints(): guid=0ll, CaptureIntent=1 updatePerfHints(): NvCameraCoreUseCase_Preview NvPHSSendThroughputHints: sensorId=0, m_usecase=4, m_type=1, m_value=30, m_timeout_ms=1000 NvPHSSendThroughputHints: sensorId=0, m_usecase=4, m_type=15, m_value=0, m_timeout_ms=1000 CaptureService cancelling request 1 FiberScheduler: cc 102, session 0, fiber 0x7f34000dd0 aborted in async operation FiberScheduler: fiber 0x7f34000dd0 exiting disposing CC 102 Session 0 Thread 11 is waiting CC 103 session 0 completed step 5 in fiber 0x7f34000f70 CC 103 session 0 completed step 6 in fiber 0x7f34000f70 SCF: Error Timeout: (propagating from src/services/capture/CaptureServiceDeviceViCsi.cpp, function waitCompletion(), line 334) SCF: Error Timeout: (propagating from src/services/capture/CaptureServiceDevice.cpp, function pause(), line 938) SCF: Error Timeout: (propagating from src/services/capture/CaptureServiceDevice.cpp, function handleCancelSourceRequests(), line 1019) SCF: Error Timeout: (propagating from src/services/capture/CaptureServiceDevice.cpp, function issueCaptures(), line 1047) SCF: Error Timeout: (propagating from src/common/Utils.cpp, function workerThread(), line 116) SCF: Error Timeout: Worker thread CaptureScheduler frameStart failed (in src/common/Utils.cpp, function workerThread(), line 133) CC 103 session 0 processing step 7 in fiber 0x7f34000f70 FiberScheduler: cc 103, session 0, fiber 0x7f34000f70 in progress... Thread 9 getting next capture Thread 9 is waiting Thread 12 is waiting