******************** EGA ******************** ----PSoC mode active---- PSoC Version : 0.7 , Creation Date :14-9-2021 Powerup sequence in progress... GPU is present... enable vdd_12v & vdd_5v... vdd_12v & vdd_5v OK... GPU module enabled... Wait for carrier power on command... carrier power on command received... enable 3v3 + 1v8... 3v3 & 1v8 OK... Wait for GPU to power HDMI... enable HDMI 5v... HDMI 5v OK... System power stable! Powerup sequence successful... EGA board initialization completed ----GPU mode active---- * Enter WAKEUPPSOC to return to PSOC mode ÿâ [0000.425] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet leve l 2 from HW fuses. [0000.434] I> MB1 (prd-version: 1.5.1.6-t194-41334769-1740dd39) [0000.439] I> Boot-mode: Coldboot [0000.442] I> Chip revision : A02P [0000.445] I> Bootrom patch version : 15 (correctly patched) [0000.450] I> ATE fuse revision : 0x200 [0000.454] I> Ram repair fuse : 0x0 [0000.457] I> Ram Code : 0x2 [0000.459] I> rst_source : 0x0 [0000.462] I> rst_level : 0x0 [0000.466] I> Boot-device: eMMC [0000.480] I> sdmmc DDR50 mode [0000.485] W> No valid slot number is found in scratch register [0000.490] W> Return default slot: _a [0000.493] I> Active Boot chain : 0 [0000.497] I> Boot-device: eMMC [0000.500] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.508] I> Temperature = 23500 [0000.511] W> Skipping boost for clk: BPMP_CPU_NIC [0000.515] W> Skipping boost for clk: BPMP_APB [0000.519] W> Skipping boost for clk: AXI_CBB [0000.523] W> Skipping boost for clk: AON_CPU_NIC [0000.528] W> Skipping boost for clk: CAN1 [0000.531] W> Skipping boost for clk: CAN2 [0000.536] I> Boot-device: eMMC [0000.538] I> Boot-device: eMMC [0000.548] I> Sdmmc: HS400 mode enabled [0000.552] I> ECC region[0]: Start:0x0, End:0x0 [0000.556] I> ECC region[1]: Start:0x0, End:0x0 [0000.561] I> ECC region[2]: Start:0x0, End:0x0 [0000.565] I> ECC region[3]: Start:0x0, End:0x0 [0000.569] I> ECC region[4]: Start:0x0, End:0x0 [0000.573] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.579] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.583] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.588] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.592] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.598] E> FAILED: Thermal config [0000.605] E> FAILED: MEMIO rail config [0000.623] I> Boot-device: eMMC [0000.633] I> sdmmc bdev is already initialized [0000.705] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ÿâ [0000.713] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-feba59 43) [0000.714] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.715] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.715] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.721] W> device prod register failed [0000.725] I> Boot-device: eMMC [0000.728] I> Boot_device: SDMMC_BOOT instance: 3 [0000.734] I> sdmmc-3 params source = boot args [0000.737] I> sdmmc bdev is already initialized [0000.741] I> sdmmc-3 params source = boot args [0000.749] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0000.756] I> Found 42 partitions in SDMMC_USER (instance 3) [0000.757] W> No valid slot number is found in scratch register [0000.762] W> Return default slot: _a [0000.765] I> Active Boot chain : 0 [0000.769] I> parsing oem signed section of bpmp-fw header done [0000.774] I> bpmp-fw binary init read from storage [0000.779] I> oem authentication of bpmp-fw header done [0000.786] I> bpmp-fw binary done read from storage [0000.788] I> bpmp-fw: Authentication init Done [0000.793] I> parsing oem signed section of cpubl header done [0000.798] I> cpubl binary init read from storage [0000.803] I> bpmp-fw: Authentication Finalize Done [0000.807] I> oem authentication of cpubl header done [0000.812] I> cpubl binary done read from storage [0000.816] I> cpubl: Authentication init Done [0000.821] I> parsing oem signed section of rce header done [0000.826] I> rce binary init read from storage [0000.830] I> Relocating BR-BCT [0000.833] I> cpubl: Authentication Finalize Done [0000.838] I> oem authentication of rce header done [0000.842] I> rce binary done read from storage [0000.846] I> rce: Authentication init Done [0000.851] I> parsing oem signed section of ape header done [0000.856] I> ape binary init read from storage [0000.860] I> rce: Authentication Finalize Done [0000.865] I> oem authentication of ape header done [0000.869] I> ape binary done read from storage [0000.873] I> ape: Authentication init Done [0000.878] I> parsing oem signed section of tos header done [0000.883] I> tos binary init read from storage [0000.887] I> ape: Authentication Finalize Done [0000.892] I> oem authentication of tos header done [0000.896] I> tos binary done read from storage [0000.900] I> tos: Authentication init Done [0000.904] I> parsing oem signed section of bpmp-fw-dtb header done [0000.910] I> bpmp-fw-dtb binary init read from storage [0000.915] I> tos: Authentication Finalize Done [0000.921] I> oem authentication of bpmp-fw-dtb header done [0000.927] I> bpmp-fw-dtb binary done read from storage [0000.930] I> bpmp-fw-dtb: Authentication init Done [0000.935] I> parsing oem signed section of cpubl-dtb header done [0000.940] I> cpubl-dtb binary init read from storage [0000.945] I> bpmp-fw-dtb: Authentication Finalize Done [0000.982] I> oem authentication of cpubl-dtb header done [0000.983] I> cpubl-dtb binary done read from storage [0000.983] I> cpubl-dtb: Authentication init Done [0000.985] I> parsing oem signed section of eks header done [0000.986] I> eks binary init read from storage [0000.986] I> cpubl-dtb: Authentication Finalize Done [0000.987] I> oem authentication of eks header done [0000.991] I> eks binary done read from storage [0000.995] I> eks: Authentication init Done [0000.999] I> eks: Authentication Finalize Done [0001.003] I> EKB detected (length: 0x410) @ VA:0x5270a400 ÿäNOTICE: BL31: v1.3(release):5b49e7f80 NOTICE: BL31: Built : 08:38:54, Feb 19 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 197: key_mgnt_processing ....... hwkey-agent: 189: Setting EKB key 0 to slot 14 hwkey-agent: 167: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete ÿâ welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 392 clocks registered WARNING: pll_c4 has no dyn ramp clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized ÿá ÿâmrq initialized ÿá[0001.504] I> Welcome to Cbootÿâfmon_post initialized ÿá [0001.505] I> Cboot Version: t194-9efcbc4f [0001.505] I> CPU-BL Params @ 0xf2820000 [0001.506] I> 0) Base:0x00000000 Size:0x00000000 [0001.510] I> 1) Base:0xf1100000 Size:0x00100000 [0001.514] I> 2) Base:0xf2000000 Size:0x00200000 [0001.518] I> 3) Base:0xf1200000 Size:0x00200000 ÿâclk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster1: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized clk_debugfs initialized ÿá[0001.523] I> 4) Base:0xf1000000 Size:0x00100000 [0001.602] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.607] I> 6) Base:0xf3800000 Size:0x00400000 [0001.611] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.616] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.620] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.625] I> 10) Base:0xf3000000 Size:0x00800000 [0001.629] I> 11) Base:0x40000000 Size:0x00040000 [0001.634] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.638] I> 13) Base:0x40046000 Size:0x00002000 [0001.643] I> 14) Base:0x40048000 Size:0x00002000 ÿâemc_debugfs initialized dvs_debugfs initialized ÿá[0001.647] I> 15) Base:0xac000000 Size:0x00004000ÿâfmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ÿá [0001.702] I> 16) Base:0x4004a000 Size:0x00002000 [0001.707] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.711] I> 18) Base:0x4004c000 Size:0x00002000 [0001.716] I> 19) Base:0xf2200000 Size:0x00600000 [0001.720] I> 20) Base:0x4004e000 Size:0x00002000 [0001.725] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.729] I> 22) Base:0x00000000 Size:0x00000000 [0001.733] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.738] I> 24) Base:0xf6000000 Size:0x02000000 [0001.742] I> 25) Base:0x40050000 Size:0x00002000 [0001.747] I> 26) Base:0x40040000 Size:0x00006000 [0001.751] I> 27) Base:0xf1800000 Size:0x00400000 [0001.756] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.760] I> 29) Base:0xf1400000 Size:0x00400000 [0001.765] I> 30) Base:0x00000000 Size:0x00000000 [0001.769] I> 31) Base:0x00000000 Size:0x00000000 [0001.774] I> 32) Base:0xf8000000 Size:0x08000000 [0001.778] I> 33) Base:0x00000000 Size:0x00000000 [0001.783] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.787] I> 35) Base:0xab000000 Size:0x01000000 [0001.791] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.796] I> 37) Base:0xf2800000 Size:0x00800000 [0001.800] I> 38) Base:0x80000000 Size:0x20000000 [0001.805] I> 39) Base:0xb0000000 Size:0x08000000 [0001.809] I> 40) Base:0x00000000 Size:0x00000000 [0001.814] I> 41) Base:0x00000000 Size:0x00000000 [0001.818] I> 42) Base:0x00000000 Size:0x00000000 [0001.823] I> 43) Base:0x00000000 Size:0x00000000 [0001.827] I> 44) Base:0x00000000 Size:0x00000000 [0001.832] I> 45) Base:0x00000000 Size:0x00000000 [0001.836] GIC-SPI Target CPU: 0 [0001.839] Interrupts Init done [0001.842] calling constructors [0001.845] initializing heap [0001.847] I> Heap: [0xa06945e8 ... 0xab000000] [0001.852] initializing threads [0001.855] initializing timers [0001.857] creating bootstrap completion thread [0001.862] top of bootstrap2() [0001.865] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.869] initializing platform [0001.872] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.878] W> device prod register failed [0001.881] I> Bl_dtb @0xaaf00000 [0001.888] W> "plugin-manager" doesn't exist, creating [0001.889] W> "ids" doesn't exist, creating [0001.894] W> "connection" doesn't exist, creating [0001.898] W> "configs" doesn't exist, creating [0001.911] I> Find /i2c@3160000's alias i2c0 [0001.911] I> Reading eeprom i2c=0 address=0x50 [0001.937] I> Device at /i2c@3160000:0x50 [0001.937] I> Reading eeprom i2c=0 address=0x56 [0001.938] E> I2C: slave not found in slaves. [0001.938] E> I2C: Could not write 0 bytes to slave: 0x00ac with repeat start tr ue. [0001.939] E> I2C_DEV: Failed to send register address 0x00000000. [0001.939] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xac at 0x00000000 via instance 0. [0001.947] E> eeprom: Failed to read I2C slave device [0001.952] I> Eeprom read failed 0x3526070d [0001.957] I> Find /i2c@3180000's alias i2c2 [0001.960] I> Reading eeprom i2c=2 address=0x54 [0001.965] E> I2C: slave not found in slaves. [0001.968] E> I2C: Could not write 0 bytes to slave: 0x00a8 with repeat start tr ue. [0001.976] E> I2C_DEV: Failed to send register address 0x00000000. [0001.981] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa8 at 0x00000000 via instance 2. [0001.991] E> eeprom: Failed to read I2C slave device [0001.996] I> Eeprom read failed 0x3526070d [0002.000] I> Reading eeprom i2c=2 address=0x57 [0002.004] E> I2C: slave not found in slaves. [0002.008] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start tr ue. [0002.016] E> I2C_DEV: Failed to send register address 0x00000000. [0002.022] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0002.031] E> eeprom: Failed to read I2C slave device [0002.036] I> Eeprom read failed 0x3526070d [0002.040] I> Reading eeprom i2c=2 address=0x52 [0002.044] E> I2C: slave not found in slaves. [0002.048] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start tr ue. [0002.056] E> I2C_DEV: Failed to send register address 0x00000000. [0002.062] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 2. [0002.071] E> eeprom: Failed to read I2C slave device [0002.076] I> Eeprom read failed 0x3526070d [0002.081] I> Find /i2c@c240000's alias i2c1 [0002.084] I> Reading eeprom i2c=1 address=0x52 [0002.090] E> I2C: slave not found in slaves. [0002.092] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start tr ue. [0002.100] E> I2C_DEV: Failed to send register address 0x00000000. [0002.106] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0002.115] E> eeprom: Retry to read I2C slave device. [0002.120] E> I2C: slave not found in slaves. [0002.124] E> I2C: Could not write 0 bytes to slave: 0x00a4 with repeat start tr ue. [0002.132] E> I2C_DEV: Failed to send register address 0x00000000. [0002.138] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa4 at 0x00000000 via instance 1. [0002.147] E> eeprom: Failed to read I2C slave device [0002.152] I> Eeprom read failed 0x3526070d [0002.156] I> Reading eeprom i2c=1 address=0x50 [0002.160] E> I2C: slave not found in slaves. [0002.164] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start tr ue. [0002.172] E> I2C_DEV: Failed to send register address 0x00000000. [0002.178] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.187] E> eeprom: Retry to read I2C slave device. [0002.192] E> I2C: slave not found in slaves. [0002.196] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start tr ue. [0002.204] E> I2C_DEV: Failed to send register address 0x00000000. [0002.209] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0002.219] E> eeprom: Failed to read I2C slave device [0002.224] I> Eeprom read failed 0x3526070d [0002.228] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.233] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00 ,touch-config:00,display-config:00,, len: 93 [0002.244] I> Adding plugin-manager/ids/2888-0004-400=/i2c@3160000:module@0x50 [0002.252] W> "i2c@3160000" doesn't exist, creating [0002.256] W> "module@0x50" doesn't exist, creating [0002.263] I> Adding plugin-manager/cvm [0002.264] W> "chip-id" doesn't exist, creating [0002.268] I> Adding plugin-manager/chip-id/A02P [0002.273] I> Plugin-manager override starting [0002.278] I> node /plugin-manager/fragement-tegra-wdt-en matches [0002.287] I> node /plugin-manager/fragement-soft-wdt matches [0002.295] I> node /plugin-manager/fragment-pcie-c5-rp matches [0002.300] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0002.314] I> Disable plugin-manager status in FDT [0002.314] I> Plugin-manager override finished successfully [0002.315] I> gpio framework initialized [0002.317] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driv er [0002.322] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.328] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.337] W> fetch_driver_phandle_from_dt: failed to get node with compatible t i,tca9539 [0002.344] W> fetch_driver_phandle_from_dt: failed to get node with compatible n xp,tca9539 [0002.350] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.356] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.364] W> fetch_driver_phandle_from_dt: failed to get node with compatible t i,tca9539 [0002.372] W> fetch_driver_phandle_from_dt: failed to get node with compatible n xp,tca9539 [0002.378] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.386] I> fixed regulator driver initialized [0002.395] I> register 'maxim' power off handle [0002.396] I> virtual i2c enabled [0002.396] I> registered 'maxim,max20024' pmic [0002.400] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.407] I> Boot-device: eMMC [0002.410] I> Boot_device: SDMMC_BOOT instance: 3 [0002.418] I> sdmmc-3 params source = boot args [0002.419] I> create_pm_ids: id: 2888-0004-400-L, len: 15 [0002.424] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00 ,touch-config:00,display-config:00,, len: 93 [0002.435] I> sdmmc bdev is already initialized [0002.439] I> sdmmc-3 params source = boot args [0002.469] I> Found 17 partitions in SDMMC_BOOT (instance 3) [0002.482] I> Found 42 partitions in SDMMC_USER (instance 3) [0002.492] I> enabling 'vdd-hdmi-5v0' regulator [0002.497] I> regulator 'vdd-hdmi-5v0' already enabled [0002.497] I> hdmi cable connected [0002.499] W> set volts not configured for 'vdd-1v0' [0002.501] W> set volts not configured for 'vdd-1v8-hs' [0002.505] E> invalid display type [0002.509] E> invalid display type [0002.510] E> cannot find any other nvdisp nodes [0002.526] I> edid read success [0002.538] I> edid read success [0002.538] I> width = 640, height = 480, frequency = 25174825 [0002.539] I> width = 640, height = 480, frequency = 25174825 [0002.539] I> width = 640, height = 480, frequency = 25174825 [0002.540] I> width = 640, height = 480, frequency = 25174825 [0002.540] I> width = 1920, height = 1080, frequency = 148500000 [0002.544] I> Best mode Width = 640, Height = 480, freq = 25174825 [0002.554] I> hdmi_enable, starting HDMI initialisation [0002.559] I> hdmi_enable, HDMI initialisation complete [0002.562] I> Load in CBoot Boot Options partition and parse it [0002.571] E> Error -9 when finding node with path /boot-configuration [0002.572] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file . [0002.579] I> Using default boot order [0002.582] I> boot-dev-order :- [0002.585] I> 1.sd [0002.587] I> 2.usb [0002.589] I> 3.nvme [0002.591] I> 4.emmc [0002.593] I> 5.net [0002.595] I> Hit any key to stop autoboot: 4 3 2 1 [0004.602] initializing target [0004.602] calling apps_init() [0004.603] starting app kernel_boot_app [0004.622] I> found decompressor handler: lz4-legacy [0004.623] I> decompressing BMP blob ... [0004.635] I> Kernel type = Normal [0004.635] I> Loading kernel-bootctrl from partition [0004.635] I> Loading partition kernel-bootctrl at 0xa4410000 from device(0x1) [0004.642] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.642] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.643] I> ########## SD (0) boot ########## [0004.643] I> No sdcard [0004.645] I> -0 params source = [0004.648] E> Blockdev open: exit error [0004.652] E> SD boot failed, err: 724238353 [0004.656] I> ########## USB (0) boot ########## [0004.665] W> No valid slot number is found in scratch register [0004.666] W> Return default slot: _a [0004.681] I> USB Firmware Version: 60.06 release [0004.737] I> regulator of usb2-0 already enabled [0004.743] I> regulator of usb2-1 already enabled [0004.750] I> regulator of usb2-2 already enabled [0004.760] I> enabling 'vdd-5v-sata' regulator [0005.827] I> USB 2.0 port 4 new low-speed USB device detected [0005.829] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa9410000, cmd_ring.dma = 0xa9410040 [0005.930] I> Start to enumerate device [0005.931] W> handle_command_completion_event: WARNING: Command was not successf ully completed (0x11) [0006.934] W> xusbh_wait_irq: Timed out! status = 0x00 [0007.938] W> xusbh_wait_irq: Timed out! status = 0x00 [0007.938] E> Failed to enumerate USB device [0007.938] E> failed to start xhci controller [0007.939] E> Error in init of XUSB host driver, err: 7979000c [0007.939] W> Failed to initialize device 5-0 [0007.939] E> USB boot failed, err: 2037973004 [0007.940] I> ########## Fixed storage boot ########## [0007.951] I> Already published: 00010003 [0007.951] I> Look for boot partition [0007.952] I> Fallback: assuming 0th partition is boot partition [0007.957] I> Detect filesystem [0007.984] I> Loading extlinux.conf ... [0007.985] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0008.021] I> L4T boot options [0008.022] I> [1]: "primary kernel" [0008.022] I> Enter choice: [0011.023] I> Continuing with default option: 1 [0011.023] I> Loading kernel sig file from rootfs ... [0011.023] I> rootfs path: /sdmmc_user/boot/Image.sig [0011.051] I> Loading kernel binary from rootfs ... [0011.052] I> rootfs path: /sdmmc_user/boot/Image [0011.272] I> overload load_size to 34338824 (from 34338832) [0011.294] I> Validate kernel ... [0011.294] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0011.607] I> Encryption fuse is not ON [0011.624] I> No kernel-dtb binary path [0011.624] W> No valid slot number is found in scratch register [0011.624] W> Return default slot: _a [0011.625] I> A/B: bin_type (38) slot 0 [0011.625] I> Loading kernel-dtb from partition [0011.625] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0011.634] I> Validate kernel-dtb ... [0011.634] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0011.639] I> Encryption fuse is not ON [0011.641] I> Loading ramdisk from rootfs ... [0011.644] I> Loading initrd sig file from rootfs ... [0011.649] I> rootfs path: /sdmmc_user/boot/initrd.sig [0011.672] I> Loading initrd binary from rootfs ... [0011.672] I> rootfs path: /sdmmc_user/boot/initrd [0011.730] I> overload load_size to 7236840 (from 7236848) [0011.733] I> Validate initrd ... [0011.733] I> T19x: Authenticate initrd (bin_type: 49), max size 0x4000000 [0011.799] I> Encryption fuse is not ON [0011.813] I> Kernel hdr @0xa4410000 [0011.813] I> Kernel dtb @0x90000000 [0011.813] I> decompressor handler not found [0011.814] I> Copying kernel image (34338824 bytes) from 0xa4410000 to 0x8008000 0 ... [0011.824] I> Done [0011.825] I> Updated bpmp info to DTB [0011.826] I> Ramdisk: Base: 0x92000000; Size: 0x6e6ce8 [0011.827] I> Updated initrd info to DTB [0011.827] W> WARN: Fail to override "console=none" in commandline [0011.828] I> Active rootfs suffix: [0011.829] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display param s [0011.836] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display param s [0011.844] W> No valid slot number is found in scratch register [0011.849] W> Return default slot: _a [0011.853] I> Active slot suffix: [0011.856] I> add_boot_slot_suffix: slot_suffix = [0011.860] I> Linux Cmdline: console=ttyTCU0,115200 video=tegrafb no_console_sus pend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_ fbmem=0x140000@0xa06a0000 lut_mem=0x2008@0xa069a000 usbcore.old_scheme_first=1 t egraid=19.1.2.0.0 maxcpus=8 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resiz e sdhci_tegra.en_boot_part_access=1 [0011.892] I> Updated bootarg info to DTB [0011.895] W> MAC addr invalid! [0011.898] E> Failed to get WIFI MAC address [0011.902] W> MAC addr invalid! [0011.905] E> Failed to get Bluetooth MAC address [0011.910] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:18:52:68 [0011.916] W> "plugin-manager" doesn't exist, creating [0011.921] I> Adding /chosen/plugin-manager/cvm [0011.925] W> "chip-id" doesn't exist, creating [0011.929] I> Adding /chosen/plugin-manager/chip-id [0011.934] W> "configs" doesn't exist, creating [0011.938] I> Adding /chosen/plugin-manager/configs [0011.943] W> "ids" doesn't exist, creating [0011.947] I> Adding /chosen/plugin-manager/ids [0011.951] W> "odm-data" doesn't exist, creating [0011.956] I> Adding /chosen/plugin-manager/odm-data [0011.964] W> "memory" doesn't exist, creating [0011.965] I> [0] START: 0x80000000, END: 0xac000000 [0011.969] I> [1] START: 0xac004000, END: 0xf0ad0000 [0011.974] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0011.979] I> dram_block larger than 80000000 [0011.983] I> [3] START: 0x100000000, END: 0x880000000 [0011.988] I> added [base:0x80000000, size:0x2c000000] to /memory [0011.993] I> added [base:0xac200000, size:0x44800000] to /memory [0011.999] I> added [base:0x100000000, size:0x780000000] to /memory [0012.006] I> Updated memory info to DTB [0012.009] E> add_disp_param: failed to get display params for du=1 [0012.015] W> "reset" doesn't exist, creating [0012.020] I> Adding ecid(00000001647057062400000019ff8100) to DT [0012.025] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0012.030] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0012.034] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0012.039] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0012.044] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0012.049] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0012.053] I> NVG: Logical CPU: 6; MPIDR: 0x80000300 [0012.058] I> NVG: Logical CPU: 7; MPIDR: 0x80000301 [0012.064] W> "misc-data" doesn't exist, creating [0012.067] I> Boot-device: eMMC [0012.070] I> Add boot-sdmmc to plugin-manager/misc-data [0012.075] I> Add storage-sdmmc to plugin-manager/misc-data [0012.081] W> Unknown storage device [0012.085] I> Add serial number:1422720010085 as DT property [0012.090] I> Plugin-manager override starting [0012.094] I> node /plugin-manager/fragement-tegra-wdt-en matches [0012.101] I> node /plugin-manager/fragement-soft-wdt matches [0012.108] I> node /plugin-manager/fragment-pcie-c5-rp matches [0012.113] I> node /plugin-manager/fragment-tegra-ufs-lane10 matches [0012.125] I> Disable plugin-manager status in FDT [0012.125] I> Plugin-manager override finished successfully [0012.127] I> tegrabl_load_kernel_and_dtb: Done [0012.136] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.201-tegra (buildbrain@mobile-u64-5285-d7000) (g cc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065 c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Fri Feb 19 08:42:04 P ST 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 780000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00140000@a06a0000 [ 0.000000] Found lut_mem: 00002008@a069a000 [ 1.790714] ucsi_ccg 1-0008: read version failed [ 1.790862] ucsi_ccg 1-0008: get_fw_info fail,, err=-121 ÿâWARNING: pll_d3 has no dyn ramp ÿá[ 2.359421] rt5659 7-001a: Device with ID register ffffff80 is not rt5659 [ 2.464384] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 2.464622] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.331407] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 4.331649] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.346027] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 4.346264] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 4.751608] cgroup: cgroup2: unknown option "nsdelegate" [ 5.061999] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 5.062049] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 5.176708] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 5.176918] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 5.191548] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 5.191777] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 5.980623] Could not get extcon-dev /xudc@3550000:vbus(0) [ 5.981891] Could not get extcon-dev /host1x/nvdisplay@15210000:typec0(0) [ 5.982790] Could not get extcon-dev /host1x/nvdisplay@15220000:typec1(1) [ 5.984401] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 5.984650] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 5.989460] Could not get extcon-dev /xhci@3610000:id(0) [ 5.993229] Could not get extcon-dev /xudc@3550000:vbus(0) [ 5.995461] Could not get extcon-dev /host1x/nvdisplay@15210000:typec0(0) [ 5.995670] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 5.995710] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 5.996511] Could not get extcon-dev /host1x/nvdisplay@15220000:typec1(1) [ 6.080344] random: crng init done [ 6.080468] random: 7 urandom warning(s) missed due to ratelimiting [ 7.104488] CPU4: shutdown [ 7.113171] Could not get extcon-dev /xhci@3610000:id(0) [ 7.116916] Could not get extcon-dev /xudc@3550000:vbus(0) [ 7.119061] tegra-asoc: sound: ASoC: CODEC DAI rt5659-aif1 not registered [ 7.119268] tegra-asoc: sound: snd_soc_register_card failed (-517) [ 7.120277] Could not get extcon-dev /host1x/nvdisplay@15210000:typec0(0) [ 7.120808] Could not get extcon-dev /host1x/nvdisplay@15220000:typec1(1) [ 7.167509] CPU5: shutdown [ 7.254809] CPU6: shutdown [ 7.307523] CPU7: shutdown