[0000.140] C> I2C command failed [0000.143] C> block index = (4) and rail_id = (1) [0000.148] C> Addr: Reg = [0xe8:0x07]: 336166925 [0000.265] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3) [0000.273] I> Default Heap @ [0xd486400 - 0xd488400] [0000.278] I> DMA Heap @ [0x85200000 - 0x86200000] [0000.283] I> bit @ 0xd480000 [0000.286] I> BR-BCT relocated to 0xd7020000 [0000.290] I> Boot-device: eMMC [0000.294] I> sdmmc bdev is already initialized [0000.298] I> pmic: reset reason (nverc) : 0x40 [0000.303] I> Reading GPT from 512 for device 00000003 [0000.309] I> Reading GPT from 8388096 for device 00000003 [0000.316] I> Found 13 partitions in 00000003 device [0000.320] I> Reading GPT from 512 for device 00010003 [0000.327] I> Found 29 partitions in 00010003 device [0000.333] W> No valid slot number is found in scratch register [0000.338] W> Return default slot: _a [0000.342] I> A/B: bin_type (16) slot 0 [0000.345] I> Loading partition bpmp-fw at 0xd7800000 [0000.350] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.356] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1 [0000.371] I> Binary(16) of size 529040 is loaded @ 0xd7800000 [0000.376] W> No valid slot number is found in scratch register [0000.382] W> Return default slot: _a [0000.385] I> A/B: bin_type (17) slot 0 [0000.389] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.394] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.400] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1 [0000.413] I> Binary(17) of size 465760 is loaded @ 0xd798e200 [0000.589] I> BPMP-FW load address = 0xd7800000 [0000.593] I> BPMP-FW DTB load address = 0x5018e200 [0000.598] I> Loading SCE-FW ... [0000.601] W> No valid slot number is found in scratch register [0000.607] W> Return default slot: _a [0000.610] I> A/B: bin_type (12) slot 0 [0000.614] I> Loading partition sce-fw at 0xd7300000 [0000.618] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.624] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1 [0000.633] I> Binary(12) of size 76592 is loaded @ 0xd7300000 [0000.638] I> Init SCE [0000.641] I> Copy BTCM section [0000.643] W> No valid slot number is found in scratch register [0000.649] W> Return default slot: _a [0000.653] I> A/B: bin_type (13) slot 0 [0000.656] I> Loading partition cpu-bootloader at 0x96000000 [0000.662] I> Reading two headers - addr:0x96000000 blocks:1 [0000.667] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1 [0000.678] I> Binary(13) of size 282736 is loaded @ 0x96000000 [0000.684] W> No valid slot number is found in scratch register [0000.690] W> Return default slot: _a [0000.693] I> A/B: bin_type (20) slot 0 [0000.697] I> Loading partition bootloader-dtb at 0x8520f400 [0000.702] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.708] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1 [0000.718] I> Binary(20) of size 229872 is loaded @ 0x8520f400 [0000.724] I> MB2-params(VA) @ 0xd7000000 [0000.728] I> CPUBL-params(VA) @ 0xd7000000 [0000.732] I> CPUBL-params(PA) @ 0x277000000 [0000.736] I> CPU-BL loaded @ PA 0x96000000 [0000.740] I> Loading TOS ... [0000.743] W> No valid slot number is found in scratch register [0000.748] W> Return default slot: _a [0000.752] I> A/B: bin_type (14) slot 0 [0000.755] I> Loading partition secure-os at 0x8530f600 [0000.761] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.766] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1 [0000.774] I> Binary(14) of size 62576 is loaded @ 0x8530f600 [0000.780] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000 [0000.787] I> Erasing Monitor @ 0x8530f800 [0000.792] I> Unhalting SCE [0000.794] I> Primary Memory Start:80000000 Size:70000000 [0000.799] I> Extended Memory Start:f0110000 Size:185ef0000 [0000.806] I> Waypoint2-ACK: 0x52012714 [0000.810] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.2(release):e1e4477 NOTICE: BL31: Built : 00:08:30, May 17 2018 NOTICE: Trusty image missing. ERROR: Error initializing runtime service trusty_fast [0001.170] I> Welcome to Cboot [0001.173] I> Cboot Version: 00.00.2014.50-t186-0c600f85 [0001.178] I> CPU-BL Params @ 0x277000000 [0001.181] I> 0) Base:0x00000000 Size:0x00000000 [0001.186] I> 1) Base:0x277f00000 Size:0x00100000 [0001.190] I> 2) Base:0x277e00000 Size:0x00100000 [0001.195] I> 3) Base:0x277d00000 Size:0x00100000 [0001.199] I> 4) Base:0x277c00000 Size:0x00100000 [0001.204] I> 5) Base:0x277b00000 Size:0x00100000 [0001.208] I> 6) Base:0x277800000 Size:0x00200000 [0001.213] I> 7) Base:0x277400000 Size:0x00400000 [0001.218] I> 8) Base:0x277a00000 Size:0x00100000 [0001.222] I> 9) Base:0x277300000 Size:0x00100000 [0001.227] I> 10) Base:0x276800000 Size:0x00800000 [0001.231] I> 11) Base:0x30000000 Size:0x00040000 [0001.235] I> 12) Base:0xf0000000 Size:0x00100000 [0001.240] I> 13) Base:0x30040000 Size:0x00001000 [0001.244] I> 14) Base:0x30048000 Size:0x00001000 [0001.249] I> 15) Base:0x30049000 Size:0x00001000 [0001.253] I> 16) Base:0x3004a000 Size:0x00001000 [0001.258] I> 17) Base:0x3004b000 Size:0x00001000 [0001.262] I> 18) Base:0x3004c000 Size:0x00001000 [0001.267] I> 19) Base:0x3004d000 Size:0x00001000 [0001.271] I> 20) Base:0x3004e000 Size:0x00001000 [0001.275] I> 21) Base:0x3004f000 Size:0x00001000 [0001.280] I> 22) Base:0x00000000 Size:0x00000000 [0001.284] I> 23) Base:0xf0100000 Size:0x00010000 [0001.289] I> 24) Base:0x00000000 Size:0x00000000 [0001.293] I> 25) Base:0x00000000 Size:0x00000000 [0001.298] I> 26) Base:0x00000000 Size:0x00000000 [0001.302] I> 27) Base:0x00000000 Size:0x00000000 [0001.306] I> 28) Base:0x84400000 Size:0x00400000 [0001.311] I> 29) Base:0x30000000 Size:0x00010000 [0001.315] I> 30) Base:0x278000000 Size:0x08000000 [0001.320] I> 31) Base:0x00000000 Size:0x00000000 [0001.324] I> 32) Base:0x276000000 Size:0x00600000 [0001.329] I> 33) Base:0x80000000 Size:0x70000000 [0001.333] I> 34) Base:0xf0110000 Size:0x185ef0000 [0001.338] I> 35) Base:0x00000000 Size:0x00000000 [0001.342] I> 36) Base:0x00000000 Size:0x00000000 [0001.347] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.351] I> 38) Base:0x84000000 Size:0x00400000 [0001.355] I> 39) Base:0x96000000 Size:0x02400000 [0001.360] I> 40) Base:0x85000000 Size:0x01200000 [0001.364] I> 41) Base:0x277000000 Size:0x00280000 [0001.369] I> 42) Base:0x00000000 Size:0x00000000 [0001.373] I> 43) Base:0x00000000 Size:0x00000000 [0001.378] GIC-SPI Target CPU: 4 [0001.381] Interrupts Init done [0001.384] calling constructors [0001.387] initializing heap [0001.390] initializing threads [0001.393] initializing timers [0001.396] creating bootstrap completion thread [0001.401] top of bootstrap2() [0001.404] CPU: ARM Cortex A57 [0001.407] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.412] initializing platform [0001.416] I> Boot-device: eMMC [0001.419] I> sdmmc bdev is already initialized [0001.424] I> Reading GPT from 512 for device 00000003 [0001.429] I> Reading GPT from 8388096 for device 00000003 [0001.436] I> Found 13 partitions in 00000003 device [0001.441] I> Reading GPT from 512 for device 00010003 [0001.447] I> Found 29 partitions in 00010003 device [0001.451] W> opt-in fuse is not set, skip fuse_burning [0001.456] I> Bl_dtb @0x8520f400 [0001.459] I> gpio framework initialized [0001.463] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver [0001.470] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver [0001.478] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.485] E> i2c dev write failed [0001.488] E> tca9539_device_init: failed to write polar reg [0001.493] E> tegrabl_tca9539_init: failed to init device! [0001.499] E> GPIO TCA9539 driver init failed [0001.615] I> decompressor handler not found [0001.622] I> fixed regulator driver initialized [0001.653] I> register 'maxim' power off handle [0001.658] I> virtual i2c enabled [0001.661] I> registered 'maxim,max77620' pmic [0001.666] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.676] I> Find /i2c@c250000's alias i2c7 [0001.680] I> Reading eeprom i2c=7 address=0x50 [0001.710] I> Device at /i2c@c250000:0x50 [0001.714] I> Reading eeprom i2c=7 address=0x57 [0001.718] E> i2c dev read failed [0001.722] E> eeprom: Failed to read I2C slave device [0001.726] I> Eeprom read failed 0x1a89800d [0001.731] I> Find /i2c@c240000's alias i2c1 [0001.735] I> Reading eeprom i2c=1 address=0x51 [0001.740] E> i2c dev read failed [0001.743] E> eeprom: Retry to read I2C slave device. [0001.749] E> i2c dev read failed [0001.752] E> eeprom: Failed to read I2C slave device [0001.757] I> Eeprom read failed 0x1a89800d [0001.761] I> Find /i2c@3160000's alias i2c0 [0001.765] I> Reading eeprom i2c=0 address=0x50 [0001.795] I> Device at /i2c@3160000:0x50 [0001.799] I> Find /i2c@3180000's alias i2c2 [0001.803] I> Reading eeprom i2c=2 address=0x54 [0001.807] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.812] C> GPIO driver for chip_id 0x2 could not be found [0001.818] E> cam_eeprom_read: Can't get gpio driver [0001.822] I> Eeprom read failed 0x2693400d [0001.826] I> create_pm_ids: id: 3310-1000-B02-E, len: 15 [0001.831] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.842] I> create_pm_ids: id: XXzX-N9ey-RXX-X, len: 15 [0001.847] I> config: mem-type:d0,power-config:5b,misc-config:07,modem-config:33,touch-config:1b,display-config:a5,, len: 93 [0001.862] I> found one nvdisp nodes at offset = 94564 [0001.867] I> found one nvdisp nodes at offset = 95480 [0001.877] E> could not find regulator [0001.880] I> found one nvdisp nodes at offset = 96284 [0001.885] I> no valid display unit config found in dtb [0001.890] W> display init failed [0001.893] initializing target [0001.896] calling apps_init() [0001.899] starting app android_boot_app [0001.903] I> Gpio keyboard init success [0001.907] I> Kernel type = Normal [0001.910] I> Loading kernel/boot.img from storage ... [0001.915] W> No valid slot number is found in scratch register [0001.921] W> Return default slot: _a [0001.924] I> A/B: bin_type (0) slot 0 [0001.927] I> Loading partition kernel at 0xa8000000 [0002.688] I> tegrabl_auth_payload: partition kernel (bin_type 0) [0002.694] W> No valid slot number is found in scratch register [0002.700] W> Return default slot: _a [0002.704] I> A/B: bin_type (1) slot 0 [0002.707] I> Loading partition kernel-dtb at 0x92000000 [0002.719] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1) [0002.726] I> Kernel DTB @ 0x92000000 [0002.729] I> Checking boot.img header magic ... [0002.733] I> [OK] [0002.735] I> Valid boot.img @ 0xa8000000 [0002.739] I> decompressor handler not found [0002.743] I> Copying kernel image (487766 bytes) from 0xa8000800 to 0x80080000 ... [0002.750] I> Done [0002.752] I> Move ramdisk (len: 0) from 0xa8078000 to 0x9d000000 [0002.759] I> Updated bpmp info to DTB [0002.764] I> Ramdisk: Base: 0x9d000000; Size: 0x0 [0002.768] I> Updated initrd info to DTB [0002.772] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.779] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.787] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0002.794] I> disabled_core_mask: 0xffffff0c [0002.798] W> No valid slot number is found in scratch register [0002.803] W> Return default slot: _a [0002.807] I> Active slot suffix: [0002.810] I> add_boot_slot_suffix: slot_suffix = [0002.814] I> add_serialno: Serial Num = 0422918066067 [0002.819] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0x2772e0000 gpt tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2.1 androidboot.serialno=0422918066067 bl_prof_dataptr=0x10000@0x277040000 sdhci_tegra.en_boot_part_access=1 [0002.858] I> Updated bootarg info to DTB [0002.862] E> "plugin-manager" doesn't exist, creating [0002.867] E> "odm-data" doesn't exist, creating [0002.873] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:c5:59:a9 [0002.879] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:c5:59:aa [0002.885] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:c5:59:ab [0002.891] E> "ids" doesn't exist, creating [0002.895] E> "connection" doesn't exist, creating [0002.900] E> "configs" doesn't exist, creating [0002.904] I> create_pm_ids: id: 3310-1000-B02-E, len: 15 [0002.909] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.920] I> create_pm_ids: id: XXzX-N9ey-RXX-X, len: 15 [0002.925] I> config: mem-type:d0,power-config:5b,misc-config:07,modem-config:33,touch-config:1b,display-config:a5,, len: 93 [0002.936] I> Adding plugin-manager/ids/3310-1000-B02=/i2c@c250000:module@0x50 [0002.943] E> "i2c@c250000" doesn't exist, creating [0002.948] E> "module@0x50" doesn't exist, creating [0002.952] I> Adding plugin-manager/ids/XXzX-N9ey-RXX=/i2c@3160000:module@0x50 [0002.959] E> "i2c@3160000" doesn't exist, creating [0002.964] E> "module@0x50" doesn't exist, creating [0002.970] I> Adding plugin-manager/ids/3310-1000-B02-E [0002.977] I> Adding plugin-manager/configs/3310-mem-type 00 [0002.982] I> Adding plugin-manager/configs/3310-power-config 00 [0002.988] I> Adding plugin-manager/configs/3310-misc-config 00 [0002.994] I> Adding plugin-manager/configs/3310-modem-config 00 [0002.999] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.005] I> Adding plugin-manager/configs/3310-display-config 00 [0003.011] E> "chip-id" doesn't exist, creating [0003.016] I> Adding plugin-manager/chip-id/A02P [0003.021] I> added [base:0x80000000, size:0x70000000] to /memory [0003.027] I> added [base:0xf0200000, size:0x185e00000] to /memory [0003.033] I> added [base:0x276600000, size:0x200000] to /memory [0003.039] E> WARNING: Failed to pass NS DRAM ranges to TOS [0003.044] I> Updated memory info to DTB [0003.049] E> "reset" doesn't exist, creating [0003.053] E> "pmc-reset-reason" doesn't exist, creating [0003.059] E> "pmic-reset-reason" doesn't exist, creating [0003.064] I> disabled_core_mask: 0xffffff0c [0003.074] I> Add serial number as DT property [0003.079] I> tegrabl_load_kernel_and_dtb: Done [0003.083] E> tegrabl_display_clear: display is not initialized [0003.089] W> Boot logo display failed... U-Boot 2016.07.1.0.1 (Aug 14 2018 - 19:38:32 +0800) TEGRA186 Model: CZTEK_tg3 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 400 bytes read in 70 ms (4.9 KiB/s) L4T boot options 1: primary kernel 2: secondary kernel Enter choice: 1: primary kernel Retrieving file: /boot/initrd 0 bytes read in 47 ms (0 Bytes/s) Retrieving file: /boot/Image_tg3_282 19238200 bytes read in 511 ms (35.9 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0x2772e0000 gpt tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2.1 androidboot.serialno=0422918066067 bl_prof_dataptr=0x10000@0x277040000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 ## Flattened Device Tree blob at 92000000 Booting using the fdt blob at 0x92000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000092000000, end 000000009203dd18 Starting kernel ... [ 0.540845] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 0.548239] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 0.843617] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 1.176486] tn40xx: Tehuti Network Driver, 0.3.6.16.2.1 [ 1.182640] tn40xx: Supported phys : MV88X3310 QT2025 TLK10232 AQR105 MUSTANG [ 1.228479] systemd[1]: Mounted Configuration File System. [ 1.237003] systemd[1]: Started Journal Service. [ 1.241487] tegra-usb-cd usb_cd: notification status (0x0, 0x1) [ 1.241490] tegra-usb-cd usb_cd: set current 0ma [ 1.241498] tegra-xudc-new 3550000.xudc: exiting ELPG [ 1.242400] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 1.242402] tegra-xudc-new 3550000.xudc: device mode on [ 1.249427] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 1.330390] systemd-journald[262]: Received request to flush runtime journal from PID 1 [ 1.631390] get adc-ready[0] gpio failed [ 1.632396] random: nonblocking pool is initialized [ 1.663294] get adc-ready[1] gpio failed [ 1.669437] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 1.678666] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 1.686331] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ 1.686335] pci_bus 0000:00: root bus resource [mem 0x50100000-0x57ffffff] [ 1.686338] pci_bus 0000:00: root bus resource [mem 0x58000000-0x7fffffff pref] [ 1.686340] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.686342] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 1.686370] pci 0000:00:01.0: [10de:10e5] type 01 class 0x060400 [ 1.686464] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.686640] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.686798] pci 0000:01:00.0: [1fc9:4027] type 00 class 0x020000 [ 1.686902] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit pref] [ 1.687061] pci 0000:01:00.0: supports D1 D2 [ 1.687063] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.687285] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.687353] pci 0000:00:01.0: BAR 9: assigned [mem 0x58000000-0x580fffff 64bit pref] [ 1.687357] pci 0000:01:00.0: BAR 0: assigned [mem 0x58000000-0x5800ffff 64bit pref] [ 1.687371] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.687380] pci 0000:00:01.0: bridge window [mem 0x58000000-0x580fffff 64bit pref] [ 1.687557] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.687559] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.687564] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 1.687636] aer 0000:00:01.0:pcie02: service driver aer loaded [ 1.687866] tn40xx 0000:01:00.0: enabling device (0000 -> 0002) [ 1.687919] tn40xx: srom 0x0 HWver 16 build 0 lane# 4 max_pl 0x0 mrrs 0x2 [ 1.698835] xhci-tegra 3530000.xhci: cannot find firmware....retry after 1 second [ 1.710296] get mipi2osdir0 gpio failed [ 1.710298] get mipi2osenb0 gpio failed [ 1.729940] camId[0]: check adc ref calibration crc failed [ 1.731553] camId[0]: po res calibration crc failed [ 1.743887] get mipi2osdir1 gpio failed [ 1.743888] get mipi2osenb1 gpio failed [ 1.761125] camId[1]: check adc ref calibration crc failed [ 1.762723] camId[1]: po res calibration crc failed [ 1.825245] get csi-extend-connect gpio failed [ 1.828939] get i2cpullup[0] gpio failed [ 1.828940] get i2cpp[0] gpio failed [ 1.829489] camid[0]: read current calibration extend data failed[1] or pmic mode dismacth[0xb1] [ 1.917431] tn40xx: PHY detected on port 0 ID=2B09AB - MV88X3310 (A1) 10Gbps 10GBase-T [ 2.304303] using random self ethernet address [ 2.309621] using random host ethernet address [ 2.327182] Mass Storage Function, version: 2009/09/11 [ 2.332994] LUN: removable file: (no medium) [ 2.336364] get po-sel[1] gpio failed [ 2.336366] get i2cpullup[1] gpio failed [ 2.336367] get i2cpp[1] gpio failed [ 2.336929] camid[1]: read current calibration extend data failed[1] or pmic mode dismacth[0xb1] [ 2.367731] using random self ethernet address [ 2.372773] using random host ethernet address [ 2.384885] usb0: HOST MAC 2e:0b:ea:ed:f0:e0 [ 2.390169] usb0: MAC be:5e:c5:e1:b2:b8 [ 2.398012] usb1: HOST MAC f6:81:dd:c4:28:ff [ 2.415547] usb1: MAC f2:7a:12:4b:12:35 [ 2.415573] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 2.699159] xhci-tegra 3530000.xhci: Firmware timestamp: 2017-12-07 10:50:08 UTC, Version: 55.09 release [ 2.712673] xhci-tegra 3530000.xhci: xHCI Host Controller [ 2.719183] xhci-tegra 3530000.xhci: new USB bus registered, assigned bus number 1 [ 2.729606] xhci-tegra 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00010810 [ 2.729629] xhci-tegra 3530000.xhci: irq 57, io mem 0x03530000 [ 2.729722] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.729725] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.729727] usb usb1: Product: xHCI Host Controller [ 2.729728] usb usb1: Manufacturer: Linux 4.4.38 xhci-hcd [ 2.729730] usb usb1: SerialNumber: 3530000.xhci [ 2.730034] hub 1-0:1.0: USB hub found [ 2.730053] hub 1-0:1.0: 4 ports detected [ 2.749458] xhci-tegra 3530000.xhci: xHCI Host Controller [ 2.749466] xhci-tegra 3530000.xhci: new USB bus registered, assigned bus number 2 [ 2.749586] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.749589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.749591] usb usb2: Product: xHCI Host Controller [ 2.749593] usb usb2: Manufacturer: Linux 4.4.38 xhci-hcd [ 2.749594] usb usb2: SerialNumber: 3530000.xhci [ 2.749862] hub 2-0:1.0: USB hub found [ 2.749882] hub 2-0:1.0: 3 ports detected [ 2.750263] tegra-xotg xotg: otg: host 3530000.xhci registered [ 2.849566] xhci-tegra 3530000.xhci: entering ELPG [ 2.852071] xhci-tegra 3530000.xhci: entering ELPG done [ 3.008680] IPVS: Creating netns size=1424 id=1 [ 3.087100] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.096540] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.198849] gk20a 17000000.gp10b: railgate is disabled. [ 3.353315] tegradc 15210000.nvdisplay: blank - powerdown [ 4.417490] tegra-usb-cd usb_cd: notification status (0x1, 0x20) [ 4.423513] tegra-usb-cd usb_cd: connected to non-standard charger [ 4.429714] tegra-usb-cd usb_cd: set current 500ma [ 4.469287] fuse init (API version 7.23) [ 4.852120] cfg80211: World regulatory domain updated: [ 4.857269] cfg80211: DFS Master region: unset [ 4.861634] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4.871374] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.879375] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.887447] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 4.895452] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 4.904924] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 4.914397] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 4.922495] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 4.930496] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 5.345496] tn40xx: MV88X3310 initdata applied [ 5.350082] tn40xx: MV88X3310 I/D version is 0.3.3.0 [ 5.551481] tn40xx: fw 0xe [ 5.554209] tn40xx: eth1, Port A [ 5.557450] tn40xx: 1 1fc9:4027:1fc9:3015 [ 5.561465] tn40xx: detected 1 cards, 1 loaded [ 5.565934] tegra-pcie 10003000.pcie-controller: speed change : Gen-1 -> Gen-2 [ 5.634792] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 5.640659] 8021q: adding VLAN 0 to HW filter on device eth1 Ubuntu 16.04 LTS 721QN045 ttyS0 721QN045 login: [ 7.638173] IPVS: Creating netns size=1424 id=2 [ 7.938438] IPVS: Creating netns size=1424 id=3