[0002.498] Add serial number:1423721003946 as DT property [0002.505] Applying platform configs [0002.512] platform-init is not present. Skipping [0002.516] calling apps_init() [0002.522] Couldn't find GPT header [0002.527] Proceeding to Cold Boot [0002.530] starting app android_boot_app [0002.534] Device state: unlocked [0002.537] display console init [0002.545] could not find regulator [0002.548] hdmi cable connected [0002.564] edid read success [0002.579] edid read success [0002.582] widthDT entry for leds-pwm not found [0002.589] = 640, height = 480, frequency = 25174825 [0002.594] width = 640, height = 480, frequency = 25174825 [0002.600] width = 2560, height = 1440, frequency = 241500000 [0002.605] width = 1920, height = 1080, frequency = 148500000 [0002.611] width = 1920, height = 1080, frequency = 148351648 [0002.617] width = 1280, height = 720, frequency = 74175824 [0002.622] width = 720, height = 480, frequency = 26973026 [0002.627] width = 720, height = 480, frequency = 26973026 [0002.633] width = 640, height = 480, frequency = 25174825 [0002.638] width = 720, height = 576, frequency = 26973026 [0002.644] width = 720, height = 576, frequency = 26973026 [0002.649] width = 1280, height = 720, frequency = 74175824 [0002.654] width = 1920, height = 1080, frequency = 148351648 [0002.660] Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.668] tmds-config node not found [0002.672] pmc_set_io_pad_voltage: Error -2 retrieving platform-io-pad-voltagepropsetting 'avdd-io-hdmi-dp' regulator to 1050000 micro volts [0002.687] setting 'vdd-1v8' regulator to 1800000 micro volts [0002.694] could not find regulator [0002.698] could not find regulator [0002.701] could not find regulator [0002.729] using default cmu settings [0002.733] dc_hdmi_enable, starting HDMI initialisation [0002.739] dc_hdmi_enable, HDMI initialisation complete [0002.744] list and configure display window [0002.753] display console init completed [0002.764] subnode volume_up is not found ! [0002.768] subnode back is not found ! [0002.771] subnode volume_down is not found ! [0002.775] subnode menu is not found ! [0002.779] Gpio keyboard init success [0002.860] found decompressor handler: lz4-legacy [0002.874] decompressing blob (type 1)... [0002.944] load_bmp_blob: panelresolution=1080 type=3 [0002.949] -------> se_aes_verify_sbk_clear: 747 [0002.953] se_aes_verify_sbk_clear: Error [0002.957] SE operation failed [0002.960] bl_battery_charging: connected to external power supply [0002.972] device_query_partition_size: failed to open partition spiflash0:MSC ! [0002.979] MSC Partition not found [0002.986] device_query_partition_size: failed to open partition spiflash0:USP ! [0002.993] USP partition read failed! [0002.997] blob_init: blob-partition USP header read failed [0003.002] android_boot Unable to update recovery partition [0003.007] kfs_getpartname: name = LNX [0003.011] Loading kernel from LNX [0003.020] Found 19 BFS partitions in "spiflash0" [0003.342] load kernel from storage [0003.347] decompressor handler not found [0003.613] Successfully loaded kernel and ramdisk images [0003.619] board ID = D78, board SKU = 0 [0003.623] sdmmc node status = okay [0003.627] sdcard instance = 0 [0003.629] sdmmc cd-inverted [0003.632] sdcard gpio handle 0x5b [0003.635] sdcard gpio pin 0xc9 [0003.638] sdcard gpio flags 0x0 [0003.641] vmmc-supply 0x9d [0003.644] cd_gpio_pin = 201 [0003.647] pin_state = 0 [0003.649] Found sdcard [0003.651] SD-card IS present ... [0003.654] load_and_boot_kernel: SD card detected OK [0003.660] load_bmp_blob: panelresolution=1080 type=3 [0004.154] display bmp image done [0004.157] NCK carveout not present [0004.161] Skipping dts_overrides [0004.164] NCK carveout not present [0004.173] Find /i2c@7000c000's alias i2c0 [0004.177] get eeprom at 1-a0, size 256, type 0 [0004.186] Find /i2c@7000c500's alias i2c2 [0004.190] get eeprom at 3-a0, size 256, type 0 [0004.194] get eeprom at 3-ae, size 256, type 0 [0004.198] pm_ids_update: Updating 1,a0, size 256, type 0 [0004.204] I2C slave not started [0004.207] I2C write failed [0004.209] Writing offset failed [0004.212] eeprom_init: EEPROM read failed [0004.216] pm_ids_update: eeprom init failed [0004.221] pm_ids_update: Updating 3,a0, size 256, type 0 [0004.251] pm_ids_update: The pm board id is 3448-0000-402 [0004.257] Adding plugin-manager/ids/3448-0000-402=/i2c@7000c500:module@0x50 [0004.266] pm_ids_update: pm id update successful [0004.270] pm_ids_update: Updating 3,ae, size 256, type 0 [0004.301] pm_ids_update: The pm board id is 3449-0000-400 [0004.307] Adding plugin-manager/ids/3449-0000-400=/i2c@7000c500:module@0x57 [0004.315] pm_ids_update: pm id update successful [0004.345] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0004.351] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB [0004.359] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0004.365] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB [0004.373] updating /chosen/nvidia,ethernet-mac node 48:b0:2d:5b:cc:3c [0004.379] Plugin Manager: Parse ODM data 0x000a4000 [0004.392] shim_cmdline_install: /chosen/bootargs: earlycon=uart8250,mmio32,0x70006000 [0004.400] Add serial number:1423721003946 as DT property [0004.409] "bpmp" doesn't exist, creating [0004.414] Updated bpmp info to DTB [0004.419] Updated initrd info to DTB [0004.423] "proc-board" doesn't exist, creating [0004.429] Updated board info to DTB [0004.432] "pmu-board" doesn't exist, creating [0004.438] Updated board info to DTB [0004.441] "display-board" doesn't exist, creating [0004.447] Updated board info to DTB [0004.451] "reset" doesn't exist, creating [0004.455] Updated reset info to DTB [0004.459] Cmdline: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt tegra_fbmem=0x800000@0x92ca9000 is_hdmi_initialised=1 [0004.498] DTB cmdline: earlycon=uart8250,mmio32,0x70006000 [0004.504] boot image cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [0004.517] Updated bootarg info to DTB [0004.520] Adding uuid 00000001643174410400000004fd8540 to DT [0004.526] Adding eks info 0 to DT [0004.532] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7 [0004.538] Updated memory info to DTB [0004.545] set vdd_core voltage to 1075 mv [0004.549] setting 'vdd-core' regulator to 1075000 micro volts [0004.555] Found secure-pmc; disable BPMP U-Boot 2020.04-g4335beb (Feb 19 2022 - 08:56:35 -0800) SoC: tegra210 Model: NVIDIA Jetson Nano Developer Kit Board: NVIDIA P3450-0000 DRAM: 4 GiB MMC: sdhci@700b0000: 1, sdhci@700b0600: 0 Loading Environment from SPI Flash... SF: Detected mx25u3235f with page size 256 Bytes, erase size 4 KiB, total 4 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2 1 0 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 845 bytes read in 27 ms (30.3 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 7160133 bytes read in 332 ms (20.6 MiB/s) Retrieving file: /boot/Image 34484232 bytes read in 1507 ms (21.8 MiB/s) append: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt tegra_fbmem=0x800000@0x92ca9000 is_hdmi_initialised=1 earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 ## Flattened Device Tree blob at 83100000 Booting using the fdt blob at 0x83100000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000083100000, end 000000008317ced3 copying carveout for /host1x@50000000/dc@54200000... copying carveout for /host1x@50000000/dc@54240000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5496-d5000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:13:06 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] Found tegra_fbmem: 00800000@92ca9000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 1.171484] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.342979] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.343044] imx219 7-0010: board setup failed [ 1.366850] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.366909] imx219 8-0010: board setup failed [ 2.044250] cgroup: cgroup2: unknown option "nsdelegate" [ 3.101339] using random self ethernet address [ 3.106262] using random host ethernet address [ 3.468159] random: crng init done [ 3.471593] random: 7 urandom warning(s) missed due to ratelimiting [ 3.546527] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2 [ 3.555884] iwlwifi 0000:01:00.0: Falling back to user helper [ 3.571993] using random self ethernet address [ 3.576509] using random host ethernet address [ 4.044074] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2 [ 4.055159] iwlwifi 0000:01:00.0: Falling back to user helper [ 4.102002] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2 [ 4.102005] iwlwifi 0000:01:00.0: Falling back to user helper [ 4.103422] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2 [ 4.103425] iwlwifi 0000:01:00.0: Falling back to user helper [ 4.518859] thermal thermal_zone6: failed to read out thermal zone (-5) [ 14.521166] Please complete system configuration setup on desktop to proceed... [ 315.002760] Bridge firewalling registered [ 327.419867] using random self ethernet address [ 327.424453] using random host ethernet address [ 327.755030] using random self ethernet address [ 327.759500] using random host ethernet address Ubuntu 18.04.5 LTS ion-desktop ttyS0 ion-desktop login: