[0421_10:24:37][ OK ] Stopped target Sound Card. [0421_10:24:37][ OK ] Stopped target Bluetooth. [0421_10:24:37] Stopping Daemon for power management... [0421_10:24:37][ OK ] Stopped target Timers. [0421_10:24:37][ OK ] Stopped Discard unused blocks once a week. [0421_10:24:37][ OK ] Stopped Clean PHP session files every 30 mins. [0421_10:24:37][ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch. [0421_10:24:37][ OK ] Stopped Daily Cleanup of Temporary Directories. [0421_10:24:37] Stopping Session 1 of user scala. [0421_10:24:37][ OK ] Stopped target RPC Port Mapper. [0421_10:24:37][ Stopping Serial Getty on ttyS0... [0421_10:24:37] Stopping User Manager for UID 1000... [0421_10:24:37] Stopping Save/Restore Sound Card State... [0421_10:24:37][ OK ] Stopped Daily apt upgrade and clean activities. [0421_10:24:37][ OK ] Stopped Daily apt download activities. [0421_10:24:37] Stopping Regular background program processing daemon... [0421_10:24:37] Stopping Bluetooth service... [0421_10:24:37] Stopping Argus daemon... [0421_10:24:37][ OK ] Stopped Regular background program processing daemon. [0421_10:24:37][ OK ] Stopped Run anacron jobs. [0421_10:24:37][ OK ] Stopped System Logging Service. [0421_10:24:37][ OK ] Stopped Disk Manager. [0421_10:24:37][ OK ] Stopped Authorization Manager. [0421_10:24:37][ OK ] Stopped Display Low memory warning. [0421_10:24:37][ OK ] Stopped PHS daemon. [0421_10:24:37][ OK ] Stopped NVS-SERVICE Embedded Sensor HAL Daemon. [0421_10:24:37][ OK ] Stopped Argus daemon. [0421_10:24:37][ OK ] Stopped /usr/local/bin/bt_enable.sh Compatibility. [0421_10:24:38][ OK ] Stopped OpenBSD Secure Shell server. [0421_10:24:38][ OK ] Stopped Serial Getty on ttyS0. [0421_10:24:38][ OK ] Stopped Serial Getty on ttyGS0. [0421_10:24:38][ OK ] Stopped Getty on tty1. [0421_10:24:38][ OK ] Stopped ACPI event daemon. [0421_10:24:38][ OK ] Stopped Bluetooth service. [0421_10:24:38][ OK ] Stopped User Manager for UID 1000. [0421_10:24:38][ OK ] Stopped Daemon for power management. [0421_10:24:38][ OK ] Stopped Save/Restore Sound Card State. [0421_10:24:38][ OK ] Stopped Session 1 of user scala. [0421_10:24:38][ OK ] Stopped LSB: Set sysfs variables from /etc/sysfs.conf. [0421_10:24:38][ OK ] Removed slice User Slice of scala. [0421_10:24:38] Stopping Login Service... [0421_10:24:38][ OK ] Removed slice system-getty.slice. [0421_10:24:38][ OK ] Removed slice system-serial\x2dgetty.slice. [0421_10:24:38][ OK ] Stopped Trigger anacron every hour. [0421_10:24:38][ OK ] Stopped target System Time Synchronized. [0421_10:24:38][ OK ] Stopped Login Service. [0421_10:24:38][ OK ] Stopped LSB: service and resource monitoring daemon. [0421_10:24:38][ OK ] Stopped LSB: Brings up/down network automatically. [0421_10:24:40][ OK ] Stopped target Network is Online. [0421_10:24:40][ OK ] Stopped Display manager for automatic session logins. [0421_10:24:40] Stopping Permit User Sessions... [0421_10:24:40][ OK ] Stopped Permit User Sessions. [0421_10:24:40][ OK ] Stopped target Remote File Systems. [0421_10:24:40][ OK ] Stopped target Remote File Systems (Pre). [0421_10:24:40][ OK ] Stopped target Network. [0421_10:24:40] Stopping WPA supplicant... [0421_10:24:40] Stopping Raise network interfaces... [0421_10:24:40] Stopping Network Name Resolution... [0421_10:24:40][ OK ] Stopped Raise network interfaces[ 46.717125] [dhd-wlan0] wl_android_wifi_off : in g_wifi_on=1, on_failure=1 [0421_10:24:40]. [0421_10:24:40][ 46.727795] [dhd-wlan0] wl_android_wifi_off : out [0421_10:24:40][ OK ] Stopped Network Name Resolution. [0421_10:24:40][ OK ] Stopped WPA supplicant. [0421_10:24:40] Stopping D-Bus System Message Bus... [0421_10:24:40][ OK ] Stopped target Network (Pre). [0421_10:24:40][ OK ] Stopped D-Bus System Message Bus. [0421_10:24:42][ OK ] Stopped Configure USB flashing port for device mode. [0421_10:24:42][ OK ] Stopped target Basic System. [0421_10:24:42][ OK ] Stopped target Sockets. [0421_10:24:42][ OK ] Closed Syslog Socket. [0421_10:24:42][ OK ] Closed ACPID Listen Socket. [0421_10:24:43][ OK ] Closed D-Bus System Message Bus Socket. [0421_10:24:43][ OK ] Stopped target Paths. [0421_10:24:43][ OK ] Stopped resolvconf-pull-resolved.path. [0421_10:24:43][ OK ] Stopped ACPI Events Check. [0421_10:24:43][ OK ] Stopped target Slices. [0421_10:24:43][ OK ] Removed slice User and Session Slice. [0421_10:24:43][ OK ] Stopped target System Initialization. [0421_10:24:43] Stopping Network Time Synchronization... [0421_10:24:43] Stopping Update UTMP about System Boot/Shutdown... [0421_10:24:43][ OK ] Stopped target Local Encrypted Volumes. [0421_10:24:43][ OK ] Stopped Forward Password Requests to Wall Directory Watch. [0421_10:24:43][ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [0421_10:24:43][ OK ] Stopped Apply Kernel Variables. [0421_10:24:43][ OK ] Stopped Load Kernel Modules. [0421_10:24:43] Stopping Load/Save Random Seed... [0421_10:24:43][ OK ] Stopped Network Time Synchronization. [0421_10:24:43][ OK ] Stopped Load/Save Random Seed. [0421_10:24:43][ OK ] Stopped Update UTMP about System Boot/Shutdown. [0421_10:24:43][ OK ] Stopped Create Volatile Files and Directories. [0421_10:24:43][ OK ] Stopped target Local File Systems. [0421_10:24:43] Unmounting /run/user/1000... [0421_10:24:43][ OK ] Unmounted /run/user/1000. [0421_10:24:43][ OK ] Stopped target Local File Systems (Pre). [0421_10:24:43][ OK ] Stopped Create Static Device Nodes in /dev. [0421_10:24:43][ OK ] Stopped Remount Root and Kernel File Systems. [0421_10:24:43][ OK ] Stopped target Swap. [0421_10:24:43][ OK ] Reached target Shutdown. [0421_10:24:43] Deactivating swap /dev/zram0... [0421_10:24:43] Deactivating swap /dev/zram3... [0421_10:24:43] Deactivating swap /dev/zram2... [0421_10:24:43] Deactivating swap /dev/zram1... [0421_10:24:43][ OK ] Deactivated swap /dev/zram0. [0421_10:24:43][ OK ] Deactivated swap /dev/zram3. [0421_10:24:43][ OK ] Deactivated swap /dev/zram2. [0421_10:24:43][ OK ] Deactivated swap /dev/zram1. [0421_10:24:43][ OK ] Reached target Unmount All Filesystems. [0421_10:24:43][ OK ] Reached target Final Step. [0421_10:24:43] Starting Power-Off... [0421_10:24:43][ 49.835054] systemd-shutdow: 35 output lines suppressed due to ratelimiting [0421_10:24:44][ 50.502776] tegra-xusb 70090000.xusb: Host not halted after 16000 microseconds. [0421_10:24:44][ 50.552242] IRQ10 no longer affine to CPU1 [0421_10:24:44][ 50.556611] CPU1: shutdown [0421_10:24:44][ 50.598798] IRQ11 no longer affine to CPU2 [0421_10:24:44][ 50.603345] CPU2: shutdown [0421_10:24:44][ 50.640473] IRQ12 no longer affine to CPU3 [0421_10:24:44][ 50.645472] CPU3: shutdown [0421_10:24:44][ 50.651752] reboot: Power down [0421_10:24:49][0000.203] [L4T TegraBoot] (version 00.00.2018.01-l4t-43566ac1) [0421_10:24:49][0000.209] Processing in cold boot mode Bootloader 2 [0421_10:24:49][0000.213] A02 Bootrom Patch rev = 1023 [0421_10:24:49][0000.217] Power-up reason: pmc por [0421_10:24:49][0000.220] No Battery Present [0421_10:24:49][0000.223] pmic max77620 reset reason [0421_10:24:49][0000.226] pmic max77620 NVERC : 0x10 [0421_10:24:49][0000.229] RamCode = 0 [0421_10:24:49][0000.232] Platform has DDR4 type RAM [0421_10:24:49][0000.235] max77620 disabling SD1 Remote Sense [0421_10:24:49][0000.239] Setting DDR voltage to 1125mv [0421_10:24:49][0000.243] Serial Number of Pmic Max77663: 0x280869 [0421_10:24:49][0000.251] Entering ramdump check [0421_10:24:49][0000.254] Get RamDumpCarveOut = 0x0 [0421_10:24:49][0000.257] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8 [0421_10:24:49][0000.262] Last reboot was clean, booting normally! [0421_10:24:49][0000.267] Sdram initialization is successful [0421_10:24:49][0000.271] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000 [0421_10:24:49][0000.277] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000 [0421_10:24:49][0000.283] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000 [0421_10:24:49][0000.289] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000 [0421_10:24:49][0000.295] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000 [0421_10:24:49][0000.300] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000 [0421_10:24:49][0000.306] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000 [0421_10:24:49][0000.312] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000 [0421_10:24:49][0000.328] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000 [0421_10:24:49][0000.334] Platform-DebugCarveout: 0 [0421_10:24:49][0000.338] Nck Carveout Base=0x00000000ff080000 Size=0x00200000 [0421_10:24:49][0000.343] Read GPT from (0:3) [0421_10:24:49][0000.358] Csd NumOfBlocks=0 [0421_10:24:49][0000.367] Using GPT Primary to query partitions [0421_10:24:49][0000.371] Read PT from (0:3) [0421_10:24:49][0000.376] Using BFS PT to query partitions [0421_10:24:49][0000.380] PT: Partition RP5 NOT found ! [0421_10:24:49][0000.384] Warning: Find Partition via PT Failed [0421_10:24:49][0000.388] Load RPB failed, skip RPB. [0421_10:24:49][0000.576] *** Booting BFS0. [0421_10:24:49][0000.579] PT: Partition LNX NOT found ! [0421_10:24:50][0001.163] *** Booting KFS0. [0421_10:24:50][0001.166] Loading Tboot-CPU binary [0421_10:24:50][0001.173] Verifying TBC in SecurePKC mode [0421_10:24:50][0001.182] Bootloader load address is 0xa0000000, entry address is 0xa0000258 [0421_10:24:50][0001.189] Bootloader downloaded successfully. [0421_10:24:50][0001.193] Downloaded Tboot-CPU binary to 0xa0000258 [0421_10:24:50][0001.198] MAX77620_GPIO5 configured [0421_10:24:50][0001.201] CPU power rail is up [0421_10:24:50][0001.204] CPU clock enabled [0421_10:24:50][0001.208] Performing RAM repair [0421_10:24:50][0001.211] Updating A64 Warmreset Address to 0xa00002e9 [0421_10:24:50][0001.216] Loading NvTbootBootloaderDTB [0421_10:24:50][0001.233] Verifying NvTbootBootloaderDTB in SecurePKC mode [0421_10:24:50][0001.296] Bootloader DTB Load Address: 0x83000000 [0421_10:24:50][0001.300] Loading NvTbootKernelDTB [0421_10:24:50][0001.317] Verifying NvTbootKernelDTB in SecurePKC mode [0421_10:24:50][0001.379] Kernel DTB Load Address: 0x83100000 [0421_10:24:50][0001.385] Loading cboot binary [0421_10:24:50][0001.396] Verifying EBT in SecurePKC mode [0421_10:24:50][0001.428] Bootloader load address is 0x92c00000, entry address is 0x92c00258 [0421_10:24:50][0001.435] Bootloader downloaded successfully. [0421_10:24:50][0001.440] PT: Partition NCT NOT found ! [0421_10:24:50][0001.443] Warning: Find Partition via PT Failed [0421_10:24:50][0001.448] Next binary entry address: 0x92c00258 [0421_10:24:50][0001.452] BoardId: 3448 [0421_10:24:50][0001.457] Overriding pmu board id with proc board id [0421_10:24:50][0001.462] Display board id is not available [0421_10:24:50][0001.473] Verifying SC7EntryFw in SecurePKC mode [0421_10:24:50][0001.526] /bpmp deleted [0421_10:24:50][0001.528] SC7EntryFw header found loaded at 0xff700000 [0421_10:24:51][0001.721] OVR2 PMIC [0421_10:24:51][0001.722] Bpmp FW successfully loaded [0421_10:24:51][0001.727] WB0 init successfully at 0xff780000 [0421_10:24:51][0001.731] Set NvDecSticky Bits [0421_10:24:51][0001.735] GSC2 address ff53fffc value c0edbbcc [0421_10:24:51][0001.741] GSC MC Settings done [0421_10:24:51][0001.745] TOS Image length 53680 [0421_10:24:51][0001.748] Monitor size 53680 [0421_10:24:51][0001.751] OS size 0 [0421_10:24:51][0001.756] Secure Os PKC Verification Success! [0421_10:24:51][0001.761] TOS image cipher info: plaintext [0421_10:24:51][0001.764] Loading and Validation of Secure OS Successful [0421_10:24:51][0001.780] SC7 Entry Firmware - 0xff700000, 0x4000 [0421_10:24:51][0001.785] NvTbootPackSdramParams: start. [0421_10:24:51][0001.790] NvTbootPackSdramParams: done. [0421_10:24:51][0001.794] Tegraboot started after 132230 us [0421_10:24:51][0001.798] Basic modules init took 1369613 us [0421_10:24:51][0001.802] Sec Bootdevice Read Time = 541 ms, Read Size = 14461 KB [0421_10:24:51][0001.808] Sec Bootdevice Write Time = 0 ms, Write Size = 0 KB [0421_10:24:51][0001.813] Next stage binary read took 7382 us [0421_10:24:51][0001.818] Validation of images took -19282 us [0421_10:24:51][0001.822] Carveout took 0 us [0421_10:24:51][0001.824] CPU initialization took 347350 us [0421_10:24:51][0001.828] Total time taken by TegraBoot 1705063 us [0421_10:24:51] [0421_10:24:51][0001.833] Starting CPU & Halting co-processor [0421_10:24:51] [0421_10:24:51]64NOTICE: BL31: v1.3(release):fe06da916 [0421_10:24:51]NOTICE: BL31: Built : 18:04:17, Apr 8 2020 [0421_10:24:51]ERROR: Error initializing runtime service trusty_fast [0421_10:24:51][0001.952] Tboot-cpu rollback check passed, continue to boot.. [0421_10:24:51][0001.961] RamCode = 0 [0421_10:24:51][0001.965] LPDDR4 Training: Read DT: Number of tables = 2 [0421_10:24:51][0001.970] EMC Training (SRC-freq: 204000; DST-freq: 1600000) [0421_10:24:51][0001.983] EMC Training Successful [0421_10:24:51][0001.986] 408000 not found in DVFS table [0421_10:24:51][0001.993] RamCode = 0 [0421_10:24:51][0001.996] DT Write: emc-table@204000 succeeded [0421_10:24:51][0002.002] DT Write: emc-table@1600000 succeeded [0421_10:24:51][0002.006] LPDDR4 Training: Write DT: Number of tables = 2 [0421_10:24:51][0002.063] [0421_10:24:51][0002.064] Debug Init done [0421_10:24:51][0002.067] Marked DTB cacheable [0421_10:24:51][0002.070] Bootloader DTB loaded at 0x83000000 [0421_10:24:51][0002.075] Marked DTB cacheable [0421_10:24:51][0002.078] Kernel DTB loaded at 0x83100000 [0421_10:24:51][0002.082] DeviceTree Init done [0421_10:24:51][0002.097] Pinmux applied successfully [0421_10:24:51][0002.102] gicd_base: 0x50041000 [0421_10:24:51][0002.105] gicc_base: 0x50042000 [0421_10:24:51][0002.108] Interrupts Init done [0421_10:24:51][0002.112] Using base:0x60005090 & irq:208 for tick-timer [0421_10:24:51][0002.117] Using base:0x60005098 for delay-timer [0421_10:24:51][0002.122] platform_init_timer: DONE [0421_10:24:51][0002.125] Timer(tick) Init done [0421_10:24:51][0002.129] osc freq = 38400 khz [0421_10:24:51][0002.133] [0421_10:24:51][0002.134] Welcome to L4T Cboot [0421_10:24:51][0002.137] [0421_10:24:51][0002.138] Cboot Version: 00.00.2018.01-t210-40c3ff9c [0421_10:24:51][0002.143] calling constructors [0421_10:24:51][0002.146] initializing heap [0421_10:24:51][0002.149] initializing threads [0421_10:24:51][0002.152] initializing timers [0421_10:24:51][0002.155] creating bootstrap completion thread [0421_10:24:51][0002.159] top of bootstrap2() [0421_10:24:51][0002.162] CPU: ARM Cortex A57 [0421_10:24:51][0002.165] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000 [0421_10:24:51][0002.170] initializing platform [0421_10:24:51][0002.224] Config for emmc ddr50 mode completed [0421_10:24:51][0002.228] sdmmc bdev is already initialized [0421_10:24:51][0002.232] Enable APE clock [0421_10:24:51][0002.235] Un-powergate APE partition [0421_10:24:51][0002.238] of_register: registering tegra_udc to of_hal [0421_10:24:51][0002.243] of_register: registering inv20628-driver to of_hal [0421_10:24:51][0002.249] of_register: registering ads1015-driver to of_hal [0421_10:24:51][0002.255] of_register: registering lp8557-bl-driver to of_hal [0421_10:24:51][0002.260] of_register: registering bq2419x_charger to of_hal [0421_10:24:51][0002.266] of_register: registering bq27441_fuel_gauge to of_hal [0421_10:24:51][0002.278] gpio framework initialized [0421_10:24:51][0002.281] of_register: registering tca9539_gpio to of_hal [0421_10:24:51][0002.286] of_register: registering tca9539_gpio to of_hal [0421_10:24:51][0002.292] of_register: registering i2c_bus_driver to of_hal [0421_10:24:51][0002.297] of_register: registering i2c_bus_driver to of_hal [0421_10:24:51][0002.303] of_register: registering i2c_bus_driver to of_hal [0421_10:24:51][0002.308] pmic framework initialized [0421_10:24:51][0002.312] of_register: registering max77620_pmic to of_hal [0421_10:24:51][0002.317] regulator framework initialized [0421_10:24:51][0002.321] of_register: registering tps65132_bl_driver to of_hal [0421_10:24:51][0002.327] initializing target [0421_10:24:51][0002.333] gpio_driver_register: register 'tegra_gpio_driver' driver [0421_10:24:51][0002.344] fixed regulator driver initialized [0421_10:24:51][0002.361] initializing OF layer [0421_10:24:51][0002.364] NCK carveout not present [0421_10:24:51][0002.368] Skipping dts_overrides [0421_10:24:51][0002.372] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0421_10:24:51][0002.389] I2C Bus Init done [0421_10:24:51][0002.391] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0421_10:24:51][0002.402] I2C Bus Init done [0421_10:24:51][0002.405] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0421_10:24:51][0002.415] I2C Bus Init done [0421_10:24:51][0002.418] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0421_10:24:51][0002.428] I2C Bus Init done [0421_10:24:51][0002.431] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0421_10:24:51][0002.441] I2C Bus Init done [0421_10:24:51][0002.444] of_children_init: Ops found for compatible string maxim,max77620 [0421_10:24:51][0002.454] max77620_init using irq 118 [0421_10:24:51][0002.459] register 'maxim,max77620' pmic [0421_10:24:51][0002.463] gpio_driver_register: register 'max77620-gpio' driver [0421_10:24:51][0002.469] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0421_10:24:51][0002.480] I2C Bus Init done [0421_10:24:51][0002.484] NCK carveout not present [0421_10:24:51][0002.494] Find /i2c@7000c000's alias i2c0 [0421_10:24:51][0002.497] get eeprom at 1-a0, size 256, type 0 [0421_10:24:51][0002.506] Find /i2c@7000c500's alias i2c2 [0421_10:24:51][0002.510] get eeprom at 3-a0, size 256, type 0 [0421_10:24:51][0002.515] get eeprom at 3-ae, size 256, type 0 [0421_10:24:51][0002.519] pm_ids_update: Updating 1,a0, size 256, type 0 [0421_10:24:51][0002.524] I2C slave not started [0421_10:24:51][0002.527] I2C write failed [0421_10:24:51][0002.530] Writing offset failed [0421_10:24:51][0002.533] eeprom_init: EEPROM read failed [0421_10:24:51][0002.537] pm_ids_update: eeprom init failed [0421_10:24:51][0002.541] pm_ids_update: Updating 3,a0, size 256, type 0 [0421_10:24:51][0002.571] pm_ids_update: The pm board id is 3448-0002-401 [0421_10:24:51][0002.578] Adding plugin-manager/ids/3448-0002-401=/i2c@7000c500:module@0x50 [0421_10:24:51][0002.586] pm_ids_update: pm id update successful [0421_10:24:51][0002.590] pm_ids_update: Updating 3,ae, size 256, type 0 [0421_10:24:51][0002.596] I2C slave not started [0421_10:24:51][0002.599] I2C write failed [0421_10:24:51][0002.601] Writing offset failed [0421_10:24:51][0002.604] eeprom_init: EEPROM read failed [0421_10:24:51][0002.608] pm_ids_update: eeprom init failed [0421_10:24:52][0002.639] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0421_10:24:52][0002.644] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB [0421_10:24:52][0002.653] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0421_10:24:52][0002.658] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB [0421_10:24:52][0002.667] updating /chosen/nvidia,ethernet-mac node 48:b0:2d:3e:61:6b [0421_10:24:52][0002.674] Plugin Manager: Parse ODM data 0x00094000 [0421_10:24:52][0002.684] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [0421_10:24:52][0002.705] Find /i2c@7000c000's alias i2c0 [0421_10:24:52][0002.709] get eeprom at 1-a0, size 256, type 0 [0421_10:24:52][0002.718] Find /i2c@7000c500's alias i2c2 [0421_10:24:52][0002.722] get eeprom at 3-a0, size 256, type 0 [0421_10:24:52][0002.726] get eeprom at 3-ae, size 256, type 0 [0421_10:24:52][0002.731] pm_ids_update: Updating 1,a0, size 256, type 0 [0421_10:24:52][0002.736] I2C slave not started [0421_10:24:52][0002.739] I2C write failed [0421_10:24:52][0002.742] Writing offset failed [0421_10:24:52][0002.745] eeprom_init: EEPROM read failed [0421_10:24:52][0002.748] pm_ids_update: eeprom init failed [0421_10:24:52][0002.753] pm_ids_update: Updating 3,a0, size 256, type 0 [0421_10:24:52][0002.783] pm_ids_update: The pm board id is 3448-0002-401 [0421_10:24:52][0002.789] Adding plugin-manager/ids/3448-0002-401=/i2c@7000c500:module@0x50 [0421_10:24:52][0002.796] pm_ids_update: pm id update successful [0421_10:24:52][0002.801] pm_ids_update: Updating 3,ae, size 256, type 0 [0421_10:24:52][0002.806] I2C slave not started [0421_10:24:52][0002.809] I2C write failed [0421_10:24:52][0002.812] Writing offset failed [0421_10:24:52][0002.815] eeprom_init: EEPROM read failed [0421_10:24:52][0002.819] pm_ids_update: eeprom init failed [0421_10:24:52][0002.849] Add serial number:1423321070622 as DT property [0421_10:24:52][0002.857] Applying platform configs [0421_10:24:52][0002.863] platform-init is not present. Skipping [0421_10:24:52][0002.868] calling apps_init() [0421_10:24:52][0002.884] Found 17 GPT partitions in "sdmmc3_user" [0421_10:24:52][0002.889] Proceeding to Cold Boot [0421_10:24:52][0002.892] starting app android_boot_app [0421_10:24:52][0002.896] Cboot RB passed, continue to boot.. [0421_10:24:52][0002.900] Device state: unlocked [0421_10:24:52][0002.903] display console init [0421_10:24:52][0002.912] could not find regulator [0421_10:24:52][0002.915] hdmi cable connected [0421_10:24:52][0002.930] edid read success [0421_10:24:52][0002.948] DT entry for leds-pwm not found [0421_10:24:52][0002.952] edid read success [0421_10:24:52][0002.955] width = 640, height = 480, frequency = 25174825 [0421_10:24:52][0002.960] width = 1920, height = 1080, frequency = 148500000 [0421_10:24:52][0002.966] width = 1360, height = 768, frequency = 85500000 [0421_10:24:52][0002.971] width = 1920, height = 540, frequency = 74250000 [0421_10:24:52][0002.977] width = 1920, height = 1080, frequency = 148351648 [0421_10:24:52][0002.982] width = 1920, height = 1080, frequency = 148351648 [0421_10:24:52][0002.988] width = 1280, height = 720, frequency = 74175824 [0421_10:24:52][0002.993] width = 1280, height = 720, frequency = 74175824 [0421_10:24:52][0002.999] width = 720, height = 480, frequency = 26973026 [0421_10:24:52][0003.004] width = 720, height = 480, frequency = 26973026 [0421_10:24:52][0003.010] width = 720, height = 576, frequency = 26973026 [0421_10:24:52][0003.015] width = 1920, height = 1080, frequency = 74175824 [0421_10:24:52][0003.021] width = 1920, height = 1080, frequency = 74175824 [0421_10:24:52][0003.026] width = 1920, height = 1080, frequency = 74175824 [0421_10:24:52][0003.032] width = 640, height = 480, frequency = 25174825 [0421_10:24:52][0003.037] Best mode Width = 1920, Height = 1080, freq = 148351648 [0421_10:24:52][0003.045] tmds-config node not found [0421_10:24:52][0003.049] pmc_set_io_pad_voltage: Error -2 retrieving platform-io-pad-voltagepropsetting 'avdd-io-hdmi-dp' regulator to 1050000 micro volts [0421_10:24:52][0003.064] setting 'vdd-1v8' regulator to 1800000 micro volts [0421_10:24:52][0003.071] could not find regulator [0421_10:24:52][0003.075] could not find regulator [0421_10:24:52][0003.078] could not find regulator [0421_10:24:52][0003.106] using default cmu settings [0421_10:24:52][0003.110] dc_hdmi_enable, starting HDMI initialisation [0421_10:24:52][0003.116] dc_hdmi_enable, HDMI initialisation complete [0421_10:24:52][0003.121] list and configure display window [0421_10:24:52][0003.130] display console init completed [0421_10:24:52][0003.141] subnode volume_up is not found ! [0421_10:24:52][0003.145] subnode back is not found ! [0421_10:24:52][0003.148] subnode volume_down is not found ! [0421_10:24:52][0003.153] subnode menu is not found ! [0421_10:24:52][0003.156] Gpio keyboard init success [0421_10:24:52][0003.203] found decompressor handler: lz4-legacy [0421_10:24:52][0003.218] decompressing blob (type 1)... [0421_10:24:52][0003.250] load_bmp_blob: panelresolution=1080 type=3 [0421_10:24:52][0003.300] decompressor handler not found [0421_10:24:52][0003.304] load_firmware_blob: Firmware blob loaded, entries=2 [0421_10:24:52][0003.309] SE operation failed [0421_10:24:52][0003.312] bl_battery_charging: connected to external power supply [0421_10:24:52][0003.320] xusb is supported [0421_10:24:52][0003.326] error while finding nvidia,portmap [0421_10:24:53][0003.830] xusb blob version 0 size 124416 [0421_10:24:53][0003.834] firmware size 124416 [0421_10:24:53][0003.839] Firmware timestamp: 0x5da88fc3, Version: 50.25 release [0421_10:24:53][0003.855] xhci0: 64 bytes context size, 32-bit DMA [0421_10:24:53][0003.895] usbus0: 5.0Gbps Super Speed USB v3.0 [0421_10:24:53][0003.915] uhub0: on usbus0 [0421_10:24:53][0004.565] uhub0: 9 ports with 9 removable, self powered [0421_10:24:54][0005.565] failed to get HID devices [0421_10:24:54][0005.568] failed to init xhci or no usb device attached [0421_10:25:25][0000.233] [L4T TegraBoot] (version 00.00.2018.01-l4t-43566ac1) [0421_10:25:25][0000.239] Processing in cold boot mode Bootloader 2 [0421_10:25:25][0000.244] A02 Bootrom Patch rev = 1023 [0421_10:25:25][0000.247] Power-up reason: pmc por [0421_10:25:25][0000.250] No Battery Present [0421_10:25:25][0000.253] pmic max77620 reset reason [0421_10:25:25][0000.256] pmic max77620 NVERC : 0x10 [0421_10:25:25][0000.260] RamCode = 0 [0421_10:25:25][0000.262] Platform has DDR4 type RAM [0421_10:25:25][0000.265] max77620 disabling SD1 Remote Sense [0421_10:25:25][0000.270] Setting DDR voltage to 1125mv [0421_10:25:25][0000.274] Serial Number of Pmic Max77663: 0x280869 [0421_10:25:25][0000.281] Entering ramdump check [0421_10:25:25][0000.284] Get RamDumpCarveOut = 0x0 [0421_10:25:25][0000.287] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8 [0421_10:25:25][0000.293] Last reboot was clean, booting normally! [0421_10:25:25][0000.297] Sdram initialization is successful [0421_10:25:25][0000.301] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000 [0421_10:25:25][0000.307] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000 [0421_10:25:25][0000.313] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000 [0421_10:25:25][0000.319] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000 [0421_10:25:25][0000.325] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000 [0421_10:25:25][0000.331] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000 [0421_10:25:25][0000.337] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000 [0421_10:25:25][0000.342] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000 [0421_10:25:26][0000.359] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000 [0421_10:25:26][0000.365] Platform-DebugCarveout: 0 [0421_10:25:26][0000.368] Nck Carveout Base=0x00000000ff080000 Size=0x00200000 [0421_10:25:26][0000.374] Read GPT from (0:3) [0421_10:25:26][0000.389] Csd NumOfBlocks=0 [0421_10:25:26][0000.397] Using GPT Primary to query partitions [0421_10:25:26][0000.401] Read PT from (0:3) [0421_10:25:26][0000.406] Using BFS PT to query partitions [0421_10:25:26][0000.410] PT: Partition RP5 NOT found ! [0421_10:25:26][0000.414] Warning: Find Partition via PT Failed [0421_10:25:26][0000.418] Load RPB failed, skip RPB. [0421_10:25:26][0000.607] *** Booting BFS0. [0421_10:25:26][0000.609] PT: Partition LNX NOT found ! [0421_10:25:26][0001.192] *** Booting KFS0. [0421_10:25:26][0001.195] Loading Tboot-CPU binary [0421_10:25:26][0001.202] Verifying TBC in SecurePKC mode [0421_10:25:26][0001.211] Bootloader load address is 0xa0000000, entry address is 0xa0000258 [0421_10:25:26][0001.218] Bootloader downloaded successfully. [0421_10:25:26][0001.222] Downloaded Tboot-CPU binary to 0xa0000258 [0421_10:25:26][0001.227] MAX77620_GPIO5 configured [0421_10:25:26][0001.231] CPU power rail is up [0421_10:25:26][0001.233] CPU clock enabled [0421_10:25:26][0001.237] Performing RAM repair [0421_10:25:26][0001.240] Updating A64 Warmreset Address to 0xa00002e9 [0421_10:25:26][0001.245] Loading NvTbootBootloaderDTB [0421_10:25:26][0001.262] Verifying NvTbootBootloaderDTB in SecurePKC mode [0421_10:25:26][0001.325] Bootloader DTB Load Address: 0x83000000 [0421_10:25:26][0001.330] Loading NvTbootKernelDTB [0421_10:25:27][0001.346] Verifying NvTbootKernelDTB in SecurePKC mode [0421_10:25:27][0001.408] Kernel DTB Load Address: 0x83100000 [0421_10:25:27][0001.414] Loading cboot binary [0421_10:25:27][0001.425] Verifying EBT in SecurePKC mode [0421_10:25:27][0001.457] Bootloader load address is 0x92c00000, entry address is 0x92c00258 [0421_10:25:27][0001.464] Bootloader downloaded successfully. [0421_10:25:27][0001.469] PT: Partition NCT NOT found ! [0421_10:25:27][0001.473] Warning: Find Partition via PT Failed [0421_10:25:27][0001.477] Next binary entry address: 0x92c00258 [0421_10:25:27][0001.481] BoardId: 3448 [0421_10:25:27][0001.486] Overriding pmu board id with proc board id [0421_10:25:27][0001.491] Display board id is not available [0421_10:25:27][0001.502] Verifying SC7EntryFw in SecurePKC mode [0421_10:25:27][0001.555] /bpmp deleted [0421_10:25:27][0001.557] SC7EntryFw header found loaded at 0xff700000 [0421_10:25:27][0001.750] OVR2 PMIC [0421_10:25:27][0001.752] Bpmp FW successfully loaded [0421_10:25:27][0001.756] WB0 init successfully at 0xff780000 [0421_10:25:27][0001.760] Set NvDecSticky Bits [0421_10:25:27][0001.764] GSC2 address ff53fffc value c0edbbcc [0421_10:25:27][0001.770] GSC MC Settings done [0421_10:25:27][0001.773] TOS Image length 53680 [0421_10:25:27][0001.777] Monitor size 53680 [0421_10:25:27][0001.779] OS size 0 [0421_10:25:27][0001.785] Secure Os PKC Verification Success! [0421_10:25:27][0001.789] TOS image cipher info: plaintext [0421_10:25:27][0001.793] Loading and Validation of Secure OS Successful [0421_10:25:27][0001.809] SC7 Entry Firmware - 0xff700000, 0x4000 [0421_10:25:27][0001.814] NvTbootPackSdramParams: start. [0421_10:25:27][0001.819] NvTbootPackSdramParams: done. [0421_10:25:27][0001.823] Tegraboot started after 163324 us [0421_10:25:27][0001.827] Basic modules init took 1368275 us [0421_10:25:27][0001.831] Sec Bootdevice Read Time = 539 ms, Read Size = 14461 KB [0421_10:25:27][0001.837] Sec Bootdevice Write Time = 0 ms, Write Size = 0 KB [0421_10:25:27][0001.842] Next stage binary read took 7382 us [0421_10:25:27][0001.846] Validation of images took -19283 us [0421_10:25:27][0001.850] Carveout took 1 us [0421_10:25:27][0001.853] CPU initialization took 347019 us [0421_10:25:27][0001.857] Total time taken by TegraBoot 1703394 us [0421_10:25:27] [0421_10:25:27][0001.862] Starting CPU & Halting co-processor [0421_10:25:27] [0421_10:25:27]64NOTICE: BL31: v1.3(release):fe06da916 [0421_10:25:27]NOTICE: BL31: Built : 18:04:17, Apr 8 2020 [0421_10:25:27]ERROR: Error initializing runtime service trusty_fast [0421_10:25:27][0001.981] Tboot-cpu rollback check passed, continue to boot.. [0421_10:25:27][0001.989] RamCode = 0 [0421_10:25:27][0001.994] LPDDR4 Training: Read DT: Number of tables = 2 [0421_10:25:27][0001.999] EMC Training (SRC-freq: 204000; DST-freq: 1600000) [0421_10:25:27][0002.012] EMC Training Successful [0421_10:25:27][0002.015] 408000 not found in DVFS table [0421_10:25:27][0002.022] RamCode = 0 [0421_10:25:27][0002.025] DT Write: emc-table@204000 succeeded [0421_10:25:27][0002.030] DT Write: emc-table@1600000 succeeded [0421_10:25:27][0002.035] LPDDR4 Training: Write DT: Number of tables = 2 [0421_10:25:27][0002.093] [0421_10:25:27][0002.094] Debug Init done [0421_10:25:27][0002.096] Marked DTB cacheable [0421_10:25:27][0002.099] Bootloader DTB loaded at 0x83000000 [0421_10:25:27][0002.104] Marked DTB cacheable [0421_10:25:27][0002.107] Kernel DTB loaded at 0x83100000 [0421_10:25:27][0002.111] DeviceTree Init done [0421_10:25:27][0002.127] Pinmux applied successfully [0421_10:25:27][0002.131] gicd_base: 0x50041000 [0421_10:25:27][0002.134] gicc_base: 0x50042000 [0421_10:25:27][0002.137] Interrupts Init done [0421_10:25:27][0002.142] Using base:0x60005090 & irq:208 for tick-timer [0421_10:25:27][0002.147] Using base:0x60005098 for delay-timer [0421_10:25:27][0002.151] platform_init_timer: DONE [0421_10:25:27][0002.155] Timer(tick) Init done [0421_10:25:27][0002.158] osc freq = 38400 khz [0421_10:25:27][0002.163] [0421_10:25:27][0002.164] Welcome to L4T Cboot [0421_10:25:27][0002.167] [0421_10:25:27][0002.168] Cboot Version: 00.00.2018.01-t210-40c3ff9c [0421_10:25:27][0002.173] calling constructors [0421_10:25:27][0002.176] initializing heap [0421_10:25:27][0002.178] initializing threads [0421_10:25:27][0002.181] initializing timers [0421_10:25:27][0002.184] creating bootstrap completion thread [0421_10:25:27][0002.189] top of bootstrap2() [0421_10:25:27][0002.191] CPU: ARM Cortex A57 [0421_10:25:27][0002.194] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000 [0421_10:25:27][0002.199] initializing platform [0421_10:25:27][0002.253] Config for emmc ddr50 mode completed [0421_10:25:27][0002.257] sdmmc bdev is already initialized [0421_10:25:27][0002.262] Enable APE clock [0421_10:25:27][0002.264] Un-powergate APE partition [0421_10:25:27][0002.268] of_register: registering tegra_udc to of_hal [0421_10:25:27][0002.273] of_register: registering inv20628-driver to of_hal [0421_10:25:27][0002.278] of_register: registering ads1015-driver to of_hal [0421_10:25:27][0002.284] of_register: registering lp8557-bl-driver to of_hal [0421_10:25:27][0002.290] of_register: registering bq2419x_charger to of_hal [0421_10:25:27][0002.295] of_register: registering bq27441_fuel_gauge to of_hal [0421_10:25:27][0002.307] gpio framework initialized [0421_10:25:27][0002.310] of_register: registering tca9539_gpio to of_hal [0421_10:25:27][0002.316] of_register: registering tca9539_gpio to of_hal [0421_10:25:27][0002.321] of_register: registering i2c_bus_driver to of_hal [0421_10:25:27][0002.327] of_register: registering i2c_bus_driver to of_hal [0421_10:25:27][0002.332] of_register: registering i2c_bus_driver to of_hal [0421_10:25:27][0002.338] pmic framework initialized [0421_10:25:27][0002.341] of_register: registering max77620_pmic to of_hal [0421_10:25:27][0002.347] regulator framework initialized [0421_10:25:27][0002.351] of_register: registering tps65132_bl_driver to of_hal [0421_10:25:27][0002.357] initializing target [0421_10:25:27][0002.362] gpio_driver_register: register 'tegra_gpio_driver' driver [0421_10:25:28][0002.373] fixed regulator driver initialized [0421_10:25:28][0002.391] initializing OF layer [0421_10:25:28][0002.394] NCK carveout not present [0421_10:25:28][0002.397] Skipping dts_overrides [0421_10:25:28][0002.401] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0421_10:25:28][0002.418] I2C Bus Init done [0421_10:25:28][0002.421] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0421_10:25:28][0002.431] I2C Bus Init done [0421_10:25:28][0002.434] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0421_10:25:28][0002.444] I2C Bus Init done [0421_10:25:28][0002.447] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0421_10:25:28][0002.457] I2C Bus Init done [0421_10:25:28][0002.460] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0421_10:25:28][0002.470] I2C Bus Init done [0421_10:25:28][0002.473] of_children_init: Ops found for compatible string maxim,max77620 [0421_10:25:28][0002.483] max77620_init using irq 118 [0421_10:25:28][0002.488] register 'maxim,max77620' pmic [0421_10:25:28][0002.493] gpio_driver_register: register 'max77620-gpio' driver [0421_10:25:28][0002.499] of_children_init: Ops found for compatible string nvidia,tegra210-i2c [0421_10:25:28][0002.509] I2C Bus Init done [0421_10:25:28][0002.513] NCK carveout not present [0421_10:25:28][0002.523] Find /i2c@7000c000's alias i2c0 [0421_10:25:28][0002.527] get eeprom at 1-a0, size 256, type 0 [0421_10:25:28][0002.536] Find /i2c@7000c500's alias i2c2 [0421_10:25:28][0002.540] get eeprom at 3-a0, size 256, type 0 [0421_10:25:28][0002.544] get eeprom at 3-ae, size 256, type 0 [0421_10:25:28][0002.548] pm_ids_update: Updating 1,a0, size 256, type 0 [0421_10:25:28][0002.554] I2C slave not started [0421_10:25:28][0002.557] I2C write failed [0421_10:25:28][0002.559] Writing offset failed [0421_10:25:28][0002.562] eeprom_init: EEPROM read failed [0421_10:25:28][0002.566] pm_ids_update: eeprom init failed [0421_10:25:28][0002.570] pm_ids_update: Updating 3,a0, size 256, type 0 [0421_10:25:28][0002.601] pm_ids_update: The pm board id is 3448-0002-401 [0421_10:25:28][0002.607] Adding plugin-manager/ids/3448-0002-401=/i2c@7000c500:module@0x50 [0421_10:25:28][0002.615] pm_ids_update: pm id update successful [0421_10:25:28][0002.620] pm_ids_update: Updating 3,ae, size 256, type 0 [0421_10:25:28][0002.625] I2C slave not started [0421_10:25:28][0002.628] I2C write failed [0421_10:25:28][0002.631] Writing offset failed [0421_10:25:28][0002.634] eeprom_init: EEPROM read failed [0421_10:25:28][0002.638] pm_ids_update: eeprom init failed [0421_10:25:28][0002.668] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0421_10:25:28][0002.674] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB [0421_10:25:28][0002.682] eeprom_get_mac: EEPROM invalid MAC address (all 0xff) [0421_10:25:28][0002.688] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB [0421_10:25:28][0002.697] updating /chosen/nvidia,ethernet-mac node 48:b0:2d:3e:61:6b [0421_10:25:28][0002.703] Plugin Manager: Parse ODM data 0x00094000 [0421_10:25:28][0002.713] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 fbcon=map:0 net.ifnames=0 sdhci_tegra.en_boot_part_access=1 [0421_10:25:28][0002.734] Find /i2c@7000c000's alias i2c0 [0421_10:25:28][0002.738] get eeprom at 1-a0, size 256, type 0 [0421_10:25:28][0002.747] Find /i2c@7000c500's alias i2c2 [0421_10:25:28][0002.751] get eeprom at 3-a0, size 256, type 0 [0421_10:25:28][0002.756] get eeprom at 3-ae, size 256, type 0 [0421_10:25:28][0002.760] pm_ids_update: Updating 1,a0, size 256, type 0 [0421_10:25:28][0002.765] I2C slave not started [0421_10:25:28][0002.768] I2C write failed [0421_10:25:28][0002.771] Writing offset failed [0421_10:25:28][0002.774] eeprom_init: EEPROM read failed [0421_10:25:28][0002.778] pm_ids_update: eeprom init failed [0421_10:25:28][0002.782] pm_ids_update: Updating 3,a0, size 256, type 0 [0421_10:25:28][0002.812] pm_ids_update: The pm board id is 3448-0002-401 [0421_10:25:28][0002.819] Adding plugin-manager/ids/3448-0002-401=/i2c@7000c500:module@0x50 [0421_10:25:28][0002.826] pm_ids_update: pm id update successful [0421_10:25:28][0002.830] pm_ids_update: Updating 3,ae, size 256, type 0 [0421_10:25:28][0002.835] I2C slave not started [0421_10:25:28][0002.838] I2C write failed [0421_10:25:28][0002.841] Writing offset failed [0421_10:25:28][0002.844] eeprom_init: EEPROM read failed [0421_10:25:28][0002.848] pm_ids_update: eeprom init failed [0421_10:25:28][0002.878] Add serial number:1423321070622 as DT property [0421_10:25:28][0002.886] Applying platform configs [0421_10:25:28][0002.893] platform-init is not present. Skipping [0421_10:25:28][0002.897] calling apps_init() [0421_10:25:28][0002.913] Found 17 GPT partitions in "sdmmc3_user" [0421_10:25:28][0002.918] Proceeding to Cold Boot [0421_10:25:28][0002.921] starting app android_boot_app [0421_10:25:28][0002.925] Cboot RB passed, continue to boot.. [0421_10:25:28][0002.929] Device state: unlocked [0421_10:25:28][0002.932] display console init [0421_10:25:28][0002.941] could not find regulator [0421_10:25:28][0002.944] hdmi cable connected [0421_10:25:28][0002.960] edid read success [0421_10:25:28][0002.978] DT entry for leds-pwm not found [0421_10:25:28][0002.981] edid read success [0421_10:25:28][0002.984] width = 640, height = 480, frequency = 25174825 [0421_10:25:28][0002.990] width = 1920, height = 1080, frequency = 148500000 [0421_10:25:28][0002.995] width = 1360, height = 768, frequency = 85500000 [0421_10:25:28][0003.001] width = 1920, height = 540, frequency = 74250000 [0421_10:25:28][0003.006] width = 1920, height = 1080, frequency = 148351648 [0421_10:25:28][0003.012] width = 1920, height = 1080, frequency = 148351648 [0421_10:25:28][0003.017] width = 1280, height = 720, frequency = 74175824 [0421_10:25:28][0003.023] width = 1280, height = 720, frequency = 74175824 [0421_10:25:28][0003.028] width = 720, height = 480, frequency = 26973026 [0421_10:25:28][0003.034] width = 720, height = 480, frequency = 26973026 [0421_10:25:28][0003.039] width = 720, height = 576, frequency = 26973026 [0421_10:25:28][0003.044] width = 1920, height = 1080, frequency = 74175824 [0421_10:25:28][0003.050] width = 1920, height = 1080, frequency = 74175824 [0421_10:25:28][0003.056] width = 1920, height = 1080, frequency = 74175824 [0421_10:25:28][0003.061] width = 640, height = 480, frequency = 25174825 [0421_10:25:28][0003.067] Best mode Width = 1920, Height = 1080, freq = 148351648 [0421_10:25:28][0003.074] tmds-config node not found [0421_10:25:28][0003.078] pmc_set_io_pad_voltage: Error -2 retrieving platform-io-pad-voltagepropsetting 'avdd-io-hdmi-dp' regulator to 1050000 micro volts [0421_10:25:28][0003.093] setting 'vdd-1v8' regulator to 1800000 micro volts [0421_10:25:28][0003.101] could not find regulator [0421_10:25:28][0003.104] could not find regulator [0421_10:25:28][0003.107] could not find regulator [0421_10:25:28][0003.136] using default cmu settings [0421_10:25:28][0003.139] dc_hdmi_enable, starting HDMI initialisation [0421_10:25:28][0003.145] dc_hdmi_enable, HDMI initialisation complete [0421_10:25:28][0003.150] list and configure display window [0421_10:25:28][0003.159] display console init completed [0421_10:25:28][0003.170] subnode volume_up is not found ! [0421_10:25:28][0003.174] subnode back is not found ! [0421_10:25:28][0003.178] subnode volume_down is not found ! [0421_10:25:28][0003.182] subnode menu is not found ! [0421_10:25:28][0003.186] Gpio keyboard init success [0421_10:25:28][0003.233] found decompressor handler: lz4-legacy [0421_10:25:28][0003.247] decompressing blob (type 1)... [0421_10:25:28][0003.280] load_bmp_blob: panelresolution=1080 type=3 [0421_10:25:28][0003.329] decompressor handler not found [0421_10:25:28][0003.333] load_firmware_blob: Firmware blob loaded, entries=2 [0421_10:25:28][0003.339] SE operation failed [0421_10:25:28][0003.342] bl_battery_charging: connected to external power supply [0421_10:25:28][0003.349] xusb is supported [0421_10:25:28][0003.355] error while finding nvidia,portmap [0421_10:25:29][0003.859] xusb blob version 0 size 124416 [0421_10:25:29][0003.863] firmware size 124416 [0421_10:25:29][0003.868] Firmware timestamp: 0x5da88fc3, Version: 50.25 release [0421_10:25:29][0003.884] xhci0: 64 bytes context size, 32-bit DMA [0421_10:25:29][0003.924] usbus0: 5.0Gbps Super Speed USB v3.0 [0421_10:25:29][0003.944] uhub0: on usbus0 [0421_10:25:30][0004.594] uhub0: 9 ports with 9 removable, self powered [0421_10:25:31][0005.594] failed to get HID devices [0421_10:25:31][0005.598] failed to init xhci or no usb device attached