[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.253-tegra (su@suchb) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #4 SMP PREEMPT Fri Nov 5 11:45:25 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Found tegra_fbmem2: 00800000@96088000 [ 0.000000] Found lut_mem2: 00002008@96085000 [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] On node 0 totalpages: 2053117 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 521725 pages, LIFO batch:31 [ 0.000000] Normal zone: 24008 pages used for memmap [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2020917 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= tegra_fbmem2=0x800000@0x96088000 lut_mem2=0x2008@0x96085000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 no_console_suspend boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus= [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29724(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7270336K/8212468K available (15358K kernel code, 2962K rwdata, 6624K rodata, 8640K init, 610K bss, 188468K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009600000 ( 6656 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e70000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e70000 - 0xffffff800a154808 ( 2963 KB) [ 0.000000] .bss : 0xffffff800a154808 - 0xffffff800a1ed0b4 ( 611 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001073] Console: colour dummy device 80x25 [ 0.001079] console [tty0] enabled [ 0.001082] bootconsole [uart8250] disabled [ 0.001090] kmemleak: Kernel memory leak detector disabled [ 0.001100] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.001107] pid_max: default: 32768 minimum: 301 [ 0.001412] Security Framework initialized [ 0.001565] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.001570] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002157] ftrace: allocating 47138 entries in 185 pages [ 0.124684] sched-energy: Sched-energy-costs installed from DT [ 0.124694] ASID allocator initialised with 65536 entries [ 0.161322] tegra-id: chipid=21817. [ 0.161328] tegra-id: opt_subrevision=1. [ 0.161345] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.161353] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.161359] DTB Build time: Nov 5 2021 11:45:13 [ 0.210649] CPU1: Booted secondary processor [4e0f0030] [ 0.242059] CPU2: Booted secondary processor [4e0f0030] [ 0.273071] CPU3: Booted secondary processor [411fd073] [ 0.305038] CPU4: Booted secondary processor [411fd073] [ 0.337023] CPU5: Booted secondary processor [411fd073] [ 0.337079] Brought up 6 CPUs [ 0.337083] SMP: Total of 6 processors activated. [ 0.337088] CPU features: detected feature: 32-bit EL0 Support [ 0.339131] CPU: All CPU(s) started at EL2 [ 0.339277] alternatives: patching kernel code [ 0.376154] devtmpfs: initialized [ 0.402864] Initilizing CustomIPI irq domain [ 0.403008] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.403018] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.411624] pinctrl core: initialized pinctrl subsystem [ 0.411871] OS set in device tree is not L4T. [ 0.412098] regulator-dummy: no parameters [ 0.412255] Initializing plugin-manager [ 0.412320] Plugin module not found [ 0.412359] Plugin-manager status disabled [ 0.413639] NET: Registered protocol family 16 [ 0.414868] pstore: using zlib compression [ 0.414882] console [pstore-1] enabled [ 0.414885] pstore: Registered ramoops as persistent store backend [ 0.414888] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.432603] cpuidle: using governor menu [ 0.433637] bpmp: waiting for handshake [ 0.433640] bpmp: handshake completed [ 0.433654] bpmp: synchronizing channels [ 0.433671] bpmp: channels synchronized [ 0.433674] bpmp: mail init ok [ 0.435281] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.435286] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.435291] arm-smmu 12000000.iommu: stage 1 translation [ 0.435294] arm-smmu 12000000.iommu: stage 2 translation [ 0.435297] arm-smmu 12000000.iommu: nested translation [ 0.435304] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.435309] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.435314] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.435319] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.435322] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.437255] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e74000) [ 0.437268] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.440166] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.441316] Registering BPMP clocks... [ 0.441408] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.441908] Serial: AMBA PL011 UART driver [ 0.443089] tegra_powergate_init: DONE [ 0.443096] DTS File Name: arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.443102] DTB Build time: Nov 5 2021 11:45:13 [ 0.444491] Tegra reboot handler registered. [ 0.445740] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.445800] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.445813] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.445816] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1 [ 0.445818] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.445966] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.445977] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.446264] iommu: Adding device 3460000.sdhci to group 0 [ 0.446916] iommu: Adding device 3400000.sdhci to group 1 [ 0.447953] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.447966] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.448376] iommu: Adding device 3160000.i2c to group 3 [ 0.448793] iommu: Adding device c240000.i2c to group 4 [ 0.449142] iommu: Adding device 3180000.i2c to group 5 [ 0.449473] iommu: Adding device 3190000.i2c to group 6 [ 0.449865] iommu: Adding device 31b0000.i2c to group 7 [ 0.450172] iommu: Adding device 31c0000.i2c to group 8 [ 0.450483] iommu: Adding device c250000.i2c to group 9 [ 0.450791] iommu: Adding device 31e0000.i2c to group 10 [ 0.452273] iommu: Adding device 3210000.spi to group 11 [ 0.452584] iommu: Adding device c260000.spi to group 12 [ 0.452894] iommu: Adding device 3240000.spi to group 13 [ 0.453577] iommu: Adding device 3100000.serial to group 14 [ 0.453898] iommu: Adding device 3110000.serial to group 15 [ 0.454197] iommu: Adding device c280000.serial to group 16 [ 0.454502] iommu: Adding device 3130000.serial to group 17 [ 0.454823] iommu: Adding device c290000.serial to group 18 [ 0.456059] iommu: Adding device 2490000.ether_qos to group 19 [ 0.456080] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.456926] iommu: Adding device b000000.rtcpu to group 20 [ 0.458853] iommu: Adding device 13e10000.host1x to group 21 [ 0.459148] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.459438] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.459729] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.460027] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.460319] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.460601] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.460900] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.461225] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.461663] iommu: Adding device 150c0000.nvcsi to group 30 [ 0.462242] iommu: Adding device 15700000.vi to group 31 [ 0.462557] iommu: Adding device 15600000.isp to group 32 [ 0.462777] iommu: Adding device 15200000.dc_common to group 33 [ 0.462865] platform 15200000.dc_common: OF IOVA linear map 0x96088000 size (0x800000) [ 0.462900] platform 15200000.dc_common: OF IOVA linear map 0x96085000 size (0x2008) [ 0.463342] iommu: Adding device 15210000.nvdisplay to group 34 [ 0.463664] iommu: Adding device 15340000.vic to group 35 [ 0.463862] iommu: Adding device 154c0000.nvenc to group 36 [ 0.464058] iommu: Adding device 15480000.nvdec to group 37 [ 0.464367] iommu: Adding device 15380000.nvjpg to group 38 [ 0.464558] iommu: Adding device 15500000.tsec to group 39 [ 0.464773] iommu: Adding device 15100000.tsecb to group 40 [ 0.465428] iommu: Adding device 15810000.se to group 41 [ 0.465627] iommu: Adding device 15820000.se to group 42 [ 0.465816] iommu: Adding device 15830000.se to group 43 [ 0.466010] iommu: Adding device 15840000.se to group 44 [ 0.466801] iommu: Adding device smmu_test to group 45 [ 0.467374] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c10000 [ 0.467386] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.467396] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.467406] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c40000 [ 0.467415] mc: mapped MMIO address: 0xffffff800b130000 -> 0x2c50000 [ 0.467423] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.467434] mc-err: mcerr ops are set to t18x [ 0.467575] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.468583] iommu: Adding device 3530000.xhci to group 46 [ 0.468594] arm-smmu: forcing sodev map for 3530000.xhci [ 0.468998] iommu: Adding device 3550000.xudc to group 47 [ 0.469010] arm-smmu: forcing sodev map for 3550000.xudc [ 0.469721] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.469729] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.469734] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.470327] iommu: Adding device 17000000.gp10b to group 48 [ 0.471291] tegra-reset 5000000.clock: registered 193 resets. [ 0.473276] iommu: Adding device d000000.bpmp to group 49 [ 0.473479] bpmp: ping status is 0 [ 0.473579] bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f [ 0.475551] bpmp d000000.bpmp: probe ok [ 0.478396] iommu: Adding device 2600000.dma to group 50 [ 0.479223] gpio gpiochip0: gpio-line-names specifies 180 line names but there are 192 lines on the chip [ 0.479724] GPIO line 460 (wifi_over_pcie) hogged as output/low [ 0.479760] GPIO line 456 (camera-control-output-low) hogged as output/high [ 0.479793] GPIO line 426 (camera-control-output-low) hogged as output/high [ 0.479824] GPIO line 461 (camera-control-output-low) hogged as output/high [ 0.479854] GPIO line 457 (camera-control-output-low) hogged as output/high [ 0.479884] GPIO line 424 (wifi-enable) hogged as output/high [ 0.479913] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.479942] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.480276] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.483920] gpio gpiochip1: gpio-line-names specifies 60 line names but there are 64 lines on the chip [ 0.484038] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.484422] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.486031] iommu: Adding device 10003000.pcie-controller to group 51 [ 0.486048] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.486358] iommu: Adding device sound to group 52 [ 0.486687] iommu: Adding device 3510000.hda to group 53 [ 0.493961] iommu: Adding device c1a0000.aon to group 54 [ 0.494396] vdd-ac-bat: 5000 mV [ 0.496064] vdd-1v8-ap: 1800 mV [ 0.498207] random: fast init done [ 0.524035] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.550472] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.552903] SCSI subsystem initialized [ 0.554019] libata version 3.00 loaded. [ 0.555544] usbcore: registered new interface driver usbfs [ 0.555886] usbcore: registered new interface driver hub [ 0.556127] usbcore: registered new device driver usb [ 0.570466] GPIO line 240 (lcd-bias-rails) hogged as output/low [ 0.572152] GPIO line 241 (lcd-bias-rails) hogged as output/low [ 0.573810] GPIO line 242 (lcd-bias-rails) hogged as output/low [ 0.575503] GPIO line 243 (lcd-bias-rails) hogged as output/low [ 0.577180] GPIO line 244 (lcd-bias-rails) hogged as output/low [ 0.579036] GPIO line 245 (lcd-bias-rails) hogged as output/low [ 0.580852] GPIO line 246 (lcd-bias-rails) hogged as output/low [ 0.582709] GPIO line 247 (lcd-bias-rails) hogged as output/low [ 0.584436] GPIO line 248 (lcd-bias-rails) hogged as output/low [ 0.586148] GPIO line 249 (lcd-bias-rails) hogged as output/low [ 0.588091] GPIO line 250 (lcd-bias-rails) hogged as output/low [ 0.589874] GPIO line 251 (lcd-bias-rails) hogged as output/low [ 0.591967] GPIO line 252 (lcd-bias-rails) hogged as output/low [ 0.593355] GPIO line 253 (lcd-bias-rails) hogged as output/low [ 0.594702] GPIO line 254 (lcd-bias-rails) hogged as output/low [ 0.595959] GPIO line 255 (lcd-bias-rails) hogged as output/low [ 0.597580] gpiochip_setup_dev: registered GPIOs 240 to 255 on device: gpiochip2 (tca9539) [ 0.599421] tegra-i2c 3160000.i2c: no acknowledge from address 0x77 [ 0.599501] pca953x 0-0077: failed reading register [ 0.599956] pca953x: probe of 0-0077 failed with error -121 [ 0.630275] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.637188] vddio-ddr: at 1125 mV [ 0.641083] avdd_dsi_csi: 1200 mV [ 0.645088] vdd-1v8: 1800 mV [ 0.648625] vdd-3v3-sys: 3300 mV [ 0.649505] spmic-ldo0: at 1800 mV [ 0.650232] spmic-ldo1: at 800 mV [ 0.652604] vddio-3v3: 3300 mV [ 0.653347] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.656608] vdd-rtc: at 800 mV [ 0.657218] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.660606] spmic-ldo6: at 1500 mV [ 0.664608] vdd-pex-1v00: 1000 mV [ 0.665239] dvdd-pex: 1000 mV [ 0.667568] GPIO line 237 (spmic_gpio_input) hogged as input [ 0.667717] GPIO line 238 (spmic_gpio_input) hogged as input [ 0.668043] gpiochip_setup_dev: registered GPIOs 232 to 239 on device: gpiochip3 (max77620-gpio) [ 0.668226] max77620 4-003c: max77620 probe successful [ 0.668641] media: Linux media interface: v0.10 [ 0.668671] Linux video capture interface: v2.00 [ 0.671288] pps_core: LinuxPPS API ver. 1 registered [ 0.671291] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.671302] PTP clock support registered [ 0.671481] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.671690] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.671714] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.672929] trusty trusty: trusty version: Built: 12:20:14 Jul 26 2021 [ 0.672942] trusty trusty: selected api version: 3 (requested 3) [ 0.673710] Advanced Linux Sound Architecture Driver Initialized. [ 0.674084] Bluetooth: Core ver 2.22 [ 0.674112] NET: Registered protocol family 31 [ 0.674115] Bluetooth: HCI device and connection manager initialized [ 0.674121] Bluetooth: HCI socket layer initialized [ 0.674125] Bluetooth: L2CAP socket layer initialized [ 0.674137] Bluetooth: SCO socket layer initialized [ 0.674851] en-vdd-sd: 3300 mV [ 0.675064] en-vdd-cam: 1800 mV [ 0.675257] vdd-hdmi: 5000 mV [ 0.675467] vdd-usb0-5v: 5000 mV [ 0.675672] vdd-usb1-5v: 5000 mV [ 0.675875] en-vdd-ts-1v8: 1800 mV [ 0.676082] en-vdd-ts-hv-3v3: 3300 mV [ 0.676292] en-vdd-disp-3v3: 3300 mV [ 0.676513] en-mdm-pwr-3v7: 3700 mV [ 0.676764] en-vdd-disp-1v8: 1800 mV [ 0.676990] en-vdd-cam-hv-2v8: 2800 mV [ 0.679273] en-vdd-cam-1v2: 1200 mV [ 0.680697] vdd-fan: 5000 mV [ 0.682222] vdd-3v3: 3300 mV [ 0.683844] dis-vdd-1v2: 1200 mV [ 0.685372] en-vdd-vcm-2v8: 2800 mV [ 0.687077] vdd-usb2-5v: 5000 mV [ 0.688615] vdd-sys-bl: 3300 mV [ 0.690051] en-vdd-sys: 1200 mV [ 0.700007] camchar: rtcpu character device driver loaded [ 0.702468] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.706388] extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1 [ 0.713921] clocksource: Switched to clocksource arch_sys_counter [ 0.890727] VFS: Disk quotas dquot_6.6.0 [ 0.891627] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.894158] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.894773] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.894882] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.894886] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.894896] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.894901] nvmap_page_pool_init: Total RAM pages: 2006000 [ 0.894904] nvmap_page_pool_init: nvmap page pool size: 250750 pages (979 MB) [ 0.894960] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.895399] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.913296] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.957106] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.958242] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.959894] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.960304] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.960849] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.961406] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.962386] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.963012] la/ptsa driver initialized. [ 0.963095] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.963165] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.967923] NET: Registered protocol family 2 [ 0.976105] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.979805] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.983372] TCP: Hash tables configured (established 65536 bind 65536) [ 0.983793] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.984725] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.988703] NET: Registered protocol family 1 [ 0.992364] RPC: Registered named UNIX socket transport module. [ 0.992429] RPC: Registered udp transport module. [ 0.992482] RPC: Registered tcp transport module. [ 0.992532] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.992643] PCI: CLS 0 bytes, default 64 [ 0.993651] Trying to unpack rootfs image as initramfs... [ 1.904120] Freeing initrd memory: 7068K [ 1.973654] host1x 13e10000.host1x: initialized [ 1.982556] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.998173] audit: initializing netlink subsys (disabled) [ 1.998342] audit: type=2000 audit(1.892:1): initialized [ 2.000902] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 2.055250] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.071694] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.078017] 9p: Installing v9fs 9p2000 file system support [ 2.095860] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 2.096197] io scheduler noop registered [ 2.098922] io scheduler cfq registered (default) [ 2.114805] gic 2a41000.agic-controller: GIC IRQ controller registered [ 2.325459] iommu: Adding device aconnect@2a41000:adsp_audio to group 55 [ 2.399617] iommu: Adding device 2993000.adsp to group 56 [ 2.402261] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 2.415669] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 2.425799] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.429391] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 2.432701] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.436369] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 2.447610] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 2.450828] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 2.451993] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 2.454459] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 2.455569] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 2.456259] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1000000, vi_iso_bw=3750000, max_bw=3750000 [ 2.466387] tsec 15500000.tsec: initialized [ 2.469701] tsec 15100000.tsecb: initialized [ 2.481079] nvdec 15480000.nvdec: initialized [ 2.500251] falcon 15340000.vic: initialized [ 2.505082] falcon 154c0000.nvenc: initialized [ 2.509015] falcon 15380000.nvjpg: initialized [ 2.527330] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 2.536114] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 2.542647] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 2.548979] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 2.555105] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 2.562635] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 2.568621] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 2.574692] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 2.590761] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=392 [ 2.590972] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 2.591619] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 2.591709] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 2.592589] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 2.592719] tegra_cec 3960000.tegra_cec: probed [ 2.593309] tegradccommon 15200000.dc_common: host1x channel mapped [ 2.593317] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 2.593358] tegradccommon 15200000.dc_common: dma mapping done [ 2.628966] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 2.631261] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 2.631382] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 2.632707] kfuse 3830000.kfuse: initialized [ 2.638446] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 2.657496] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.668276] console [ttyS0] disabled [ 2.668552] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra [ 2.673963] console [ttyS0] enabled [ 2.678954] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 2.682152] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 2.685580] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 2.688766] c290000.serial: ttyTHS6 at MMIO 0xc290000 (irq = 40, base_baud = 0) is a TEGRA_UART [ 2.694168] [drm] Initialized [ 2.737078] brd: module loaded [ 2.755416] loop: module loaded [ 2.755737] tegra_profiler: version: 1.145, samples/io: 49/28 [ 2.756515] tegra_profiler: auth: init [ 2.758755] nct1008_nct72 7-004c: starting parse dt [ 2.759177] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 2.759210] nct1008_nct72 7-004c: success parsing dt [ 2.759546] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 2.760768] THERMAL EST: found 3 subdevs [ 2.760798] THERMAL EST num_resources: 0 [ 2.760824] [THERMAL EST subdev 0] [ 2.760873] [THERMAL EST subdev 1] [ 2.761067] [THERMAL EST subdev 2] [ 2.762476] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 2.762497] THERMAL EST: thz register success. [ 2.762944] THERMAL EST: end of probe, return err: 0 [ 2.766854] sd: No Scsi addr parsed to reserve index [ 2.766981] hisi_sas: driver version v1.6 [ 2.778018] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.778068] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 2.781372] scsi host0: tegra_ahci [ 2.784856] scsi host1: tegra_ahci [ 2.785483] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 2.785548] ata2: DUMMY [ 2.797740] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 2.798394] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 2.808292] libphy: Fixed MDIO Bus: probed [ 2.811150] tun: Universal TUN/TAP device driver, 1.6 [ 2.811210] tun: (C) 1999-2004 Max Krasnyansky [ 2.813801] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.814047] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.814295] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 2.814346] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.814536] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 2.814586] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 2.814786] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 2.814836] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.826524] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 2.833370] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 2.834582] nct1008_nct72 7-004c: initial LOC temp: 30000 [ 2.834966] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 1a fc 7a [ 2.835128] Using phyrst_lpmode = 0 from DT [ 2.835172] nct1008_nct72 7-004c: initial EXT temp: 32000 [ 2.835725] libphy: dwc_phy: probed [ 2.836637] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 2.837239] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 2.837648] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 2.838416] nct1008_nct72 7-004c: nct1008_probe: initialized [ 2.845784] PPP generic driver version 2.4.2 [ 2.846695] PPP BSD Compression module registered [ 2.846759] PPP Deflate Compression module registered [ 2.846937] PPP MPPE Compression module registered [ 2.846991] NET: Registered protocol family 24 [ 2.847239] usbcore: registered new interface driver r8152 [ 2.847452] usbcore: registered new interface driver asix [ 2.847754] usbcore: registered new interface driver ax88179_178a [ 2.847941] usbcore: registered new interface driver cdc_ether [ 2.848111] usbcore: registered new interface driver net1080 [ 2.848499] usbcore: registered new interface driver cdc_subset [ 2.848671] usbcore: registered new interface driver zaurus [ 2.848915] usbcore: registered new interface driver cdc_ncm [ 2.849728] VFIO - User Level meta-driver version: 0.3 [ 2.856290] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.856356] ehci-pci: EHCI PCI platform driver [ 2.856510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.856546] ohci-pci: OHCI PCI platform driver [ 2.856735] ohci-platform: OHCI generic platform driver [ 2.872208] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 2.877270] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eaf3e800 id [ 2.879734] usbcore: registered new interface driver uas [ 2.879979] usbcore: registered new interface driver usb-storage [ 2.880611] usbcore: registered new interface driver usbserial [ 2.882188] tegra-xusb 3530000.xhci: Firmware timestamp: 2020-07-06 13:39:28 UTC, Version: 55.18 release [ 2.889451] tegra-xudc-new 3550000.xudc: device count: 1 [ 2.890503] tegra-xudc-new 3550000.xudc: vbus state: 1 [ 2.908190] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 2.910654] tegra-xusb 3530000.xhci: xHCI Host Controller [ 2.910763] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 2.911827] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 2.912083] tegra-xusb 3530000.xhci: irq 72, io mem 0x03530000 [ 2.913131] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.913162] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.913187] usb usb1: Product: xHCI Host Controller [ 2.913210] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 2.913232] usb usb1: SerialNumber: 3530000.xhci [ 2.915065] hub 1-0:1.0: USB hub found [ 2.915233] hub 1-0:1.0: 4 ports detected [ 2.916805] tegra-xusb 3530000.xhci: xHCI Host Controller [ 2.916851] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 2.917765] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.917794] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.917817] usb usb2: Product: xHCI Host Controller [ 2.918001] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 2.918025] usb usb2: SerialNumber: 3530000.xhci [ 2.919950] hub 2-0:1.0: USB hub found [ 2.920087] hub 2-0:1.0: 3 ports detected [ 2.922825] Wake76 for irq=199 [ 2.922890] Wake77 for irq=199 [ 2.922940] Wake78 for irq=199 [ 2.923004] Wake79 for irq=199 [ 2.923051] Wake80 for irq=199 [ 2.923101] Wake81 for irq=199 [ 2.923147] Wake82 for irq=199 [ 2.923301] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 2.923426] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 3.102553] ata1: SATA link down (SStatus 0 SControl 300) [ 3.122192] tegra-usb-cd usb_cd: notification status (0x0, 0x7) [ 3.122220] tegra-usb-cd usb_cd: connected to CDP [ 3.122265] tegra-xudc-new 3550000.xudc: device mode on: 0 [ 3.122420] tegra-xudc-new 3550000.xudc: active: 0 => 1 [ 3.125360] mousedev: PS/2 mouse device common for all mice [ 3.125429] usbcore: registered new interface driver xpad [ 3.203982] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.207622] Wake73 for irq=42 [ 3.209510] rtc rtc1: alarm rtc device [ 3.209673] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.209753] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.210527] i2c /dev entries driver [ 3.224195] ov5693_sdi1 0-0036: probing v4l2 sensor. [ 3.224236] ov5693_sdi1 0-0036: -->suchb:tegracam_device_register. [ 3.225699] ov5693_sdi1 0-0036: tegracam sensor driver:ov5693_sdi1_v2.0.6 [ 3.225727] ov5693_sdi1 0-0036: -->suchb: board_setup. [ 3.242022] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 3.264223] usb 1-2: New USB device found, idVendor=0424, idProduct=2807 [ 3.264256] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.264278] usb 1-2: Product: USB2807 Hub [ 3.264298] usb 1-2: Manufacturer: Microchip [ 3.267889] hub 1-2:1.0: USB hub found [ 3.268140] hub 1-2:1.0: 7 ports detected [ 3.322664] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 3.382442] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 3.403942] usb 2-1: New USB device found, idVendor=0424, idProduct=5807 [ 3.403975] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.403999] usb 2-1: Product: USB5807 Hub [ 3.404019] usb 2-1: Manufacturer: Microchip [ 3.407994] hub 2-1:1.0: USB hub found [ 3.408298] hub 2-1:1.0: 7 ports detected [ 3.558040] usb 1-2.2: new high-speed USB device number 3 using tegra-xusb [ 3.575897] ov5693_sdi1 0-0036: -->suchb: tegracam_v4l2subdev_register. [ 3.580926] ov5693_sdi2 8-001f: probing v4l2 sensor. [ 3.580966] ov5693_sdi2 8-001f: -->suchb:tegracam_device_register. [ 3.581836] ov5693_sdi2 8-001f: tegracam sensor driver:ov5693_sdi2_v2.0.6 [ 3.581973] ov5693_sdi2 8-001f: -->suchb: board_setup. [ 3.595068] usb 1-2.2: New USB device found, idVendor=0bda, idProduct=5411 [ 3.595103] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.595126] usb 1-2.2: Product: 4-Port USB 2.0 Hub [ 3.595146] usb 1-2.2: Manufacturer: Generic [ 3.599277] hub 1-2.2:1.0: USB hub found [ 3.600602] hub 1-2.2:1.0: 4 ports detected [ 3.622031] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 3.622061] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 3.686177] usb 1-2.3: new high-speed USB device number 4 using tegra-xusb [ 3.707929] usb 1-2.3: New USB device found, idVendor=0424, idProduct=2640 [ 3.707961] usb 1-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.711009] hub 1-2.3:1.0: USB hub found [ 3.711239] hub 1-2.3:1.0: 3 ports detected [ 3.744915] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 3.747028] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 3.787160] usb 2-1.2: new SuperSpeed USB device number 3 using tegra-xusb [ 3.823411] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=0411 [ 3.823443] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.823466] usb 2-1.2: Product: 4-Port USB 3.0 Hub [ 3.823485] usb 2-1.2: Manufacturer: Generic [ 3.834502] hub 2-1.2:1.0: USB hub found [ 3.835913] hub 2-1.2:1.0: 4 ports detected [ 3.894132] usb 1-2.2.1: new low-speed USB device number 5 using tegra-xusb [ 3.921396] usb 1-2.2.1: New USB device found, idVendor=046d, idProduct=c31d [ 3.921428] usb 1-2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.921448] usb 1-2.2.1: Product: USB Keyboard [ 3.921469] usb 1-2.2.1: Manufacturer: Logitech [ 3.930253] ov5693_sdi2 8-001f: -->suchb: tegracam_v4l2subdev_register. [ 3.932375] ov5693_av 2-0036: probing v4l2 sensor. [ 3.932413] ov5693_av 2-0036: -->suchb:tegracam_device_register. [ 3.933221] ov5693_av 2-0036: tegracam sensor driver:ov5693_av_v2.0.6 [ 3.933248] ov5693_av 2-0036: -->suchb: board_setup. [ 3.998057] usb 1-2.3.1: new high-speed USB device number 6 using tegra-xusb [ 4.024769] usb 1-2.3.1: New USB device found, idVendor=0424, idProduct=4050 [ 4.024800] usb 1-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.024822] usb 1-2.3.1: Product: Ultra Fast Media Reader [ 4.024840] usb 1-2.3.1: Manufacturer: Generic [ 4.024859] usb 1-2.3.1: SerialNumber: 000000264001 [ 4.027467] usb-storage 1-2.3.1:1.0: USB Mass Storage device detected [ 4.028874] scsi host2: usb-storage 1-2.3.1:1.0 [ 4.098106] usb 1-2.2.2: new full-speed USB device number 7 using tegra-xusb [ 4.122353] usb 1-2.2.2: New USB device found, idVendor=046d, idProduct=c534 [ 4.122386] usb 1-2.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.122407] usb 1-2.2.2: Product: USB Receiver [ 4.122426] usb 1-2.2.2: Manufacturer: Logitech [ 4.161990] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 4.198580] usb 2-1.2.4: new SuperSpeed USB device number 4 using tegra-xusb [ 4.220454] usb 2-1.2.4: New USB device found, idVendor=0bda, idProduct=8153 [ 4.220486] usb 2-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 4.220508] usb 2-1.2.4: Product: USB 10/100/1000 LAN [ 4.220527] usb 2-1.2.4: Manufacturer: Realtek [ 4.220651] usb 2-1.2.4: SerialNumber: 001000001 [ 4.297799] ov5693_av 2-0036: -->suchb: tegracam_v4l2subdev_register. [ 4.300555] usb 1-2.2.3: new high-speed USB device number 8 using tegra-xusb [ 4.301945] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 4.321531] parse_throttle_dt_data: Num cap clks = 4 [ 4.321602] parse_throttle_dt_data: clk=mcpu type=1 [ 4.321657] parse_throttle_dt_data: clk=bcpu type=2 [ 4.321719] parse_throttle_dt_data: clk=gpu type=4 [ 4.321770] parse_throttle_dt_data: clk=emc type=3 [ 4.324652] tegra_throttle_probe: probe successful. #cdevs=4 [ 4.327328] FAN dev name: pwm-fan [ 4.327577] FAN:gpio request success. [ 4.327654] FAN: can't find tach_gpio [ 4.327750] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 4.328841] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 4.328871] pwm_fan_driver pwm-fan: tach period: 1000 [ 4.330203] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 4.330233] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 4.330273] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 4.330296] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 4.330317] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 4.330338] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 4.330358] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 4.330379] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 4.330513] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 4.330536] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 4.332614] usb 1-2.2.3: New USB device found, idVendor=0b95, idProduct=772b [ 4.332645] usb 1-2.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.332668] usb 1-2.2.3: Product: AX88772C [ 4.332689] usb 1-2.2.3: Manufacturer: ASIX Elec. Corp. [ 4.332817] usb 1-2.2.3: SerialNumber: 0018DA [ 4.336846] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 4.344191] device-mapper: uevent: version 1.0.3 [ 4.348487] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.350027] CPU EMC frequency mapping table: from device tree [ 4.361761] cpufreq: platform driver Initialization: pass [ 4.362516] cpuidle: Initializing cpuidle driver init for Denver cluster [ 4.362642] cpuidle: Initializing cpuidle driver init for A57 cluster [ 4.363478] sdhci: Secure Digital Host Controller Interface driver [ 4.363489] sdhci: Copyright(c) Pierre Ossman [ 4.363509] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.364992] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 4.366976] CMDQ: cmdq_platfm_init successful [ 4.368190] CQE: CMD_TIMING bit set for R1B DCMD [ 4.371997] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 4.376661] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 4.376718] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 4.377472] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 4.379329] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 259 [ 4.384581] tegra-se-nvhost 15810000.se: initialized [ 4.385798] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 4.386743] tegra-se-nvhost 15820000.se: initialized [ 4.387796] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 4.388388] tegra-se-nvhost 15830000.se: initialized [ 4.389201] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 4.390159] tegra-se-nvhost 15840000.se: initialized [ 4.391131] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 4.392121] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.392244] hidraw: raw HID events driver (C) Jiri Kosina [ 4.395678] input: Logitech USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.0/0003:046D:C31D.0001/input/input0 [ 4.402507] usb 2-1.2.4: reset SuperSpeed USB device number 4 using tegra-xusb [ 4.409890] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.417923] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.425998] gpio tegra-gpio wake71 for gpio=125(P:5) [ 4.426059] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 4.454182] hid-generic 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3530000.xhci-2.2.1/input0 [ 4.455716] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 4.460523] input: Logitech USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.2/1-2.2.1/1-2.2.1:1.1/0003:046D:C31D.0002/input/input1 [ 4.466561] r8152 2-1.2.4:1.0 eth1: v2.09.00 (2017/08/21) [ 4.466567] r8152 2-1.2.4:1.0 eth1: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4.470799] mmc0: periodic cache flush enabled [ 4.470811] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.471344] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 4.471606] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 4.471915] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 4.472157] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 4.477639] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 4.518360] hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3530000.xhci-2.2.1/input1 [ 4.519901] input: Logitech USB Receiver as /devices/3530000.xhci/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.0/0003:046D:C534.0003/input/input2 [ 4.568685] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 4.578899] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3530000.xhci-2.2.2/input0 [ 4.581928] input: Logitech USB Receiver as /devices/3530000.xhci/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.1/0003:046D:C534.0004/input/input3 [ 4.642290] hid-generic 0003:046D:C534.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3530000.xhci-2.2.2/input1 [ 4.642417] usbcore: registered new interface driver usbhid [ 4.642420] usbhid: USB HID core driver [ 4.647269] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 4.650270] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 4.650643] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.650889] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 4.651396] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 4.653561] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 4.653700] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 4.653860] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 4.653972] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 4.654181] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 4.654678] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (53) [ 4.654682] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 4.655650] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=c73bbe92930645be44530c166eb578bfbb9499c3 [ 4.657351] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.657917] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.658296] register_ari_mca_banks: Registered MCA ROC:IOB [ 4.658582] register_ari_mca_banks: Registered MCA ROC:CCE [ 4.659302] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659305] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 4.659308] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 4.659357] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659359] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 4.659361] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 4.659407] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659409] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 4.659411] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 4.659455] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659457] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 4.659459] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 4.659516] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659518] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 4.659520] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 4.659569] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659574] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 4.659576] tegra18-bridge 2100000.axip2p: bridge probed OK [ 4.659619] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659624] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 4.659626] tegra18-bridge 2110000.axip2p: bridge probed OK [ 4.659668] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659673] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 4.659675] tegra18-bridge 2120000.axip2p: bridge probed OK [ 4.659717] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659722] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 4.659724] tegra18-bridge 2130000.axip2p: bridge probed OK [ 4.659767] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659770] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 4.659772] tegra18-bridge 2140000.axip2p: bridge probed OK [ 4.659818] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659823] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 4.659825] tegra18-bridge 2150000.axip2p: bridge probed OK [ 4.659868] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659873] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 4.659875] tegra18-bridge 2160000.axip2p: bridge probed OK [ 4.659918] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659924] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 4.659926] tegra18-bridge 2170000.axip2p: bridge probed OK [ 4.659971] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.659976] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 4.659978] tegra18-bridge 2180000.axip2p: bridge probed OK [ 4.660021] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 4.660025] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 4.660027] tegra18-bridge 2190000.axip2p: bridge probed OK [ 4.660089] **** A57 ECC: Enabled [ 4.660091] tegra18_a57_serr_init: on CPU 3 a A57 Core [ 4.660158] tegra18x_actmon d230000.actmon: in actmon_register()... [ 4.660657] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 4.661980] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 4.662099] denver_knobs_init:MTS_VERSION:53679346 [ 4.664704] nvpmodel: initialized successfully [ 4.667147] trusty-virtio trusty:virtio: initializing [ 4.667398] trusty_ipc virtio0: vring0: va(pa) ffffffc1e7954000(0) qsz 32 notifyid 1 [ 4.667410] trusty_ipc virtio0: vring1: va(pa) ffffffc1e7956000(0) qsz 32 notifyid 2 [ 4.667529] trusty-virtio trusty:virtio: initializing done [ 4.667636] trusty_ipc virtio0: is online [ 4.669939] usbcore: registered new interface driver snd-usb-audio [ 4.672307] mmc1: Applying tuning correction [ 4.672342] mmc1: Tap value after applying correction 59 [ 4.672350] mmc1: hw tuning done ... [ 4.679532] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.679578] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input4 [ 4.679799] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input5 [ 4.759236] asix 1-2.2.3:1.0 eth2: register 'asix' at usb-3530000.xhci-2.2.3, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:d1:44:34 [ 4.803131] OPE platform probe [ 4.803294] OPE platform probe successful [ 4.884259] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 4.884352] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 4.884430] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 4.884504] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 4.884580] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 4.884666] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 4.884739] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 4.884815] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 4.884932] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 4.885008] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 4.885096] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 4.885175] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 4.885251] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 4.885324] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 4.885395] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 4.885475] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 4.885567] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 4.885641] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 4.885718] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 4.885791] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 4.911913] u32 classifier [ 4.911919] Actions configured [ 4.912017] Initializing XFRM netlink socket [ 4.913662] NET: Registered protocol family 10 [ 4.915108] NET: Registered protocol family 17 [ 4.915124] NET: Registered protocol family 15 [ 4.915335] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.915455] Bluetooth: RFCOMM socket layer initialized [ 4.915477] Bluetooth: RFCOMM ver 1.11 [ 4.915483] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.915493] Bluetooth: HIDP socket layer initialized [ 4.915526] 9pnet: Installing 9P2000 support [ 4.915568] Key type dns_resolver registered [ 4.915955] Registered cp15_barrier emulation handler [ 4.915971] Registered setend emulation handler [ 4.917380] registered taskstats version 1 [ 4.920628] isp 15600000.isp: initialized [ 4.925276] nvcsi 150c0000.nvcsi: initialized [ 4.926567] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 4.929588] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 4.929621] generic_infoframe_type: 0x87 [ 4.929674] tegradc 15210000.nvdisplay: DT parsed successfully [ 4.929790] tegradc 15210000.nvdisplay: Display dc.ffffff800d390000 registered with id=0 [ 4.930333] Wake83 for irq=51 [ 4.930419] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 4.930504] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 4.930594] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 4.930740] input: gpio-keys as /devices/gpio-keys/input/input6 [ 4.933873] tegra-vi4 15700000.vi: initialized [ 4.935072] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--3 bound [ 4.935093] tegra-vi4 15700000.vi: subdev ov5693_sdi1 0-0036 bound [ 4.935884] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound [ 4.935891] tegra-vi4 15700000.vi: subdev ov5693_sdi2 8-001f bound [ 4.936656] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 4.936663] tegra-vi4 15700000.vi: subdev ov5693_av 2-0036 bound [ 4.938799] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 4.938803] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 4.938804] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 4.938962] tegradc 15210000.nvdisplay: vblank syncpt # 12 for dc 1 [ 4.938965] tegradc 15210000.nvdisplay: vpulse3 syncpt # 13 for dc 1 [ 4.939780] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 4.942638] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 4.942645] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 4.944834] tegradc 15210000.nvdisplay: probed [ 4.950959] Console: switching to colour frame buffer device 240x67 [ 4.951089] tegradc 15210000.nvdisplay: fb registered [ 4.951422] gpio tegra-gpio wake21 for gpio=121(P:1) [ 4.951939] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 4.952017] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 4.952090] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 4.953594] Parent Clock set for DC plld2 [ 4.962904] tegra_rtc c2a0000.rtc: setting system clock to 2021-11-10 03:36:30 UTC (1636515390) [ 4.963940] mmcblk mmc0:0001: Card claimed for testing. [ 4.965076] tegra-pcie 10003000.pcie-controller: link 2 down, retrying [ 4.966096] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring [ 4.999727] bpmp: mounted debugfs mirror [ 5.001086] bwmgr: missing cdev-type property [ 5.007490] ALSA device list: [ 5.007500] #0: tegra-hda at 0x3518000 irq 385 [ 5.007503] #1: tegra-snd-t186ref-mobile-rt565x [ 5.007765] tegradc 15210000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 5.008269] tegradc 15210000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 5.008280] tegradc 15210000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 5.008795] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 5.008799] Extcon AUX1(HDMI) enable [ 5.011059] Freeing unused kernel memory: 8640K [ 5.030712] scsi 2:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.76 PQ: 0 ANSI: 0 [ 5.032343] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 5.050572] Root device found: mmcblk0p1 [ 5.053308] Found dev node: /dev/mmcblk0p1 [ 5.075058] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.078576] Rootfs mounted over mmcblk0p1 [ 5.106413] Switching from initrd to actual rootfs [ 5.110207] tegradc 15210000.nvdisplay: blank - powerdown [ 5.117687] random: crng init done [ 5.158070] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 5.158073] Extcon AUX1(HDMI) disable [ 5.168558] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 5.168858] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails [ 5.180241] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 5.180340] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 5.180899] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 5.197371] tegradc 15210000.nvdisplay: unblank [ 5.198171] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.198274] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.198374] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 5.199844] Parent Clock set for DC plld2 [ 5.203922] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 5.205360] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 5.209178] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 5.209182] Extcon AUX1(HDMI) enable [ 5.222163] tegradc 15210000.nvdisplay: sync windows ret = 246 [ 5.222247] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 5.222251] Extcon HDMI: HPD enabled [ 5.222291] tegradc 15210000.nvdisplay: hdmi: plugged [ 5.247464] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.299039] cgroup: cgroup2: unknown option "nsdelegate" [ 5.326141] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.329717] systemd[1]: Detected architecture arm64. [ 5.432036] systemd[1]: Set hostname to . [ 5.556527] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 5.556553] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 5.768614] systemd[1]: Created slice User and Session Slice. [ 5.778253] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.778377] systemd[1]: Reached target Swap. [ 5.778754] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.780618] systemd[1]: Created slice System Slice. [ 5.830874] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 6.114232] systemd-journald[2400]: Received request to flush runtime journal from PID 1 [ 6.998724] gpio tegra-gpio wake18 for gpio=101(M:5) [ 7.003390] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.019595] bcpu-throttle-alert cooling device registered. [ 7.039049] using random self ethernet address [ 7.043577] using random host ethernet address [ 7.046450] mcpu-throttle-alert cooling device registered. [ 7.063228] gpu-throttle-alert cooling device registered. [ 7.163346] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 7.408786] dhd_module_init in [ 7.408849] found wifi platform device bcmdhd_wlan [ 7.410150] wifi_platform_get_country_code_map: could not get country_code_map [ 7.410156] wifi_plat_dev_drv_probe:platform country code map is not available [ 7.410180] Power-up adapter 'DHD generic adapter' [ 7.410188] wifi_platform_set_power = 1 [ 7.602360] Mass Storage Function, version: 2009/09/11 [ 7.602366] LUN: removable file: (no medium) [ 7.612368] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7.617887] wifi_platform_bus_enumerate device present 1 [ 7.622801] br0: port 1(eth0) entered blocking state [ 7.622808] br0: port 1(eth0) entered disabled state [ 7.624398] using random self ethernet address [ 7.628971] using random host ethernet address [ 7.630357] device eth0 entered promiscuous mode [ 7.674654] rndis0: HOST MAC 96:68:08:a8:aa:34 [ 7.674680] rndis0: MAC 96:68:08:a8:aa:35 [ 7.677969] usb0: HOST MAC 96:68:08:a8:aa:36 [ 7.677994] usb0: MAC 96:68:08:a8:aa:37 [ 7.678021] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 7.690558] l4tbr0: port 1(rndis0) entered blocking state [ 7.690562] l4tbr0: port 1(rndis0) entered disabled state [ 7.690717] device rndis0 entered promiscuous mode [ 7.709229] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 7.725165] wifi_platform_bus_enumerate device present 0 [ 7.742750] l4tbr0: port 2(usb0) entered blocking state [ 7.742754] l4tbr0: port 2(usb0) entered disabled state [ 7.742901] device usb0 entered promiscuous mode [ 7.754430] F1 signature read @0x18000000=0x17214354 [ 7.755218] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 7.820994] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 7.823155] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 7.853686] wifi_platform_get_mac_addr [ 7.858661] android_work: did not send uevent (0 0 (null)) [ 7.859846] ids dhd_log_netlink_init [ 7.886425] wl_event_handler : [ 7.886434] tsk Enter, tsk = 0xffffffc1d2741a90 [ 7.886443] wl_create_event_handler(): thread:wl_event_handler:1562 started [ 7.902125] dhd_attach(): thread:dhd_watchdog_thread:156d started [ 7.903033] dhd_attach(): thread:dhd_dpc:1570 started [ 7.909992] dhd_attach(): thread:dhd_rxf:1572 started [ 7.910001] dhd_deferred_work_init: work queue initialized [ 7.926566] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 7.927872] android_work: sent uevent USB_STATE=CONNECTED [ 7.928003] Register interface [wlan0] MAC: 48:b0:2d:1a:fc:78 [ 7.928008] dhd_prot_ioctl : bus is down. we have nothing to do [ 7.929296] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 59 [ 7.935081] wifi_platform_set_power = 0 [ 7.938661] android_work: sent uevent USB_STATE=DISCONNECTED [ 7.994593] br0: port 2(eth1) entered blocking state [ 7.994598] br0: port 2(eth1) entered disabled state [ 7.994784] device eth1 entered promiscuous mode [ 8.005408] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 8.031760] android_work: sent uevent USB_STATE=CONNECTED [ 8.037971] configfs-gadget gadget: high-speed config #1: c [ 8.038005] tegra-xudc-new 3550000.xudc: ep 5 (type: 3, dir: in) enabled [ 8.038021] tegra-xudc-new 3550000.xudc: ep 3 (type: 2, dir: in) enabled [ 8.038036] tegra-xudc-new 3550000.xudc: ep 2 (type: 2, dir: out) enabled [ 8.038122] tegra-xudc-new 3550000.xudc: ep 9 (type: 3, dir: in) enabled [ 8.038138] tegra-xudc-new 3550000.xudc: ep 7 (type: 2, dir: in) enabled [ 8.038152] tegra-xudc-new 3550000.xudc: ep 4 (type: 2, dir: out) enabled [ 8.038188] tegra-xudc-new 3550000.xudc: ep 15 (type: 3, dir: in) enabled [ 8.038242] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready [ 8.038387] android_work: sent uevent USB_STATE=CONFIGURED [ 8.038432] tegra-xudc-new 3550000.xudc: ep 11 (type: 2, dir: in) enabled [ 8.038447] tegra-xudc-new 3550000.xudc: ep 6 (type: 2, dir: out) enabled [ 8.041500] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 8.041517] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 8.041670] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 8.042867] tegra-xudc-new 3550000.xudc: ep 13 disabled [ 8.042963] tegra-xudc-new 3550000.xudc: ep 8 disabled [ 8.059991] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 8.060010] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 8.351337] zram: Added device: zram0 [ 8.360467] zram: Added device: zram1 [ 8.366425] zram: Added device: zram2 [ 8.366888] zram: Added device: zram3 [ 8.367278] zram: Added device: zram4 [ 8.369958] zram: Added device: zram5 [ 8.405803] zram0: detected capacity change from 0 to 686055424 [ 8.421801] Adding 669972k swap on /dev/zram0. Priority:5 extents:1 across:669972k SS [ 8.424540] zram1: detected capacity change from 0 to 686055424 [ 8.442542] Adding 669972k swap on /dev/zram1. Priority:5 extents:1 across:669972k SS [ 8.445184] zram2: detected capacity change from 0 to 686055424 [ 8.457136] Adding 669972k swap on /dev/zram2. Priority:5 extents:1 across:669972k SS [ 8.460102] zram3: detected capacity change from 0 to 686055424 [ 8.475442] Adding 669972k swap on /dev/zram3. Priority:5 extents:1 across:669972k SS [ 8.492333] zram4: detected capacity change from 0 to 686055424 [ 8.504961] Adding 669972k swap on /dev/zram4. Priority:5 extents:1 across:669972k SS [ 8.507720] zram5: detected capacity change from 0 to 686055424 [ 8.524197] Adding 669972k swap on /dev/zram5. Priority:5 extents:1 across:669972k SS [ 8.670886] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 8.671664] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 8.898615] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 8.901650] asix 1-2.2.3:1.0 eth2: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 9.968526] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.968839] Dongle Host Driver, version 1.201.82 (r) Compiled from [ 9.968854] wl_android_wifi_on in [ 9.968861] wifi_platform_set_power = 1 [ 10.455308] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 59 [ 10.460726] F1 signature read @0x18000000=0x17214354 [ 10.484029] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 10.490697] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 10.697289] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 10.762758] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 10.763005] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 10.763064] gpio tegra-gpio-aon wake69 for gpio=59(FF:3) [ 10.763066] Enabling wake69 [ 10.764226] wifi_platform_get_mac_addr [ 10.765808] Firmware up: op_mode=0x0005, MAC=48:b0:2d:1a:fc:78 [ 10.769957] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob [ 10.769992] Skipping the clm download. len:0 memblk: (null) [ 10.772090] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 10.776761] Firmware version = wl0: Jul 21 2020 16:35:45 version 7.35.349.94 (r726700 CY) FWID 01-aa356e32 [ 10.778999] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 10.895077] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : [ 10.895080] P2P interface registered [ 10.907372] WLC_E_IF: NO_IF set, event Ignored [ 10.916595] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.209946] Bridge firewalling registered [ 17.231331] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 17.465426] l4tbr0: port 2(usb0) entered blocking state [ 17.465431] l4tbr0: port 2(usb0) entered forwarding state [ 17.465493] l4tbr0: port 1(rndis0) entered blocking state [ 17.465497] l4tbr0: port 1(rndis0) entered forwarding state [ 17.465565] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready [ 17.465581] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready [ 17.584129] Netfilter messages via NETLINK v0.30. [ 17.586034] ctnetlink v0.93: registering with nfnetlink. [ 17.827337] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 35.910002] spmic-ldo0: disabling [ 35.910240] spmic-ldo1: disabling [ 35.910425] en-vdd-sd: disabling [ 35.910429] en-vdd-cam: disabling [ 35.910432] vdd-usb0-5v: disabling [ 35.910435] vdd-usb1-5v: disabling [ 35.910439] en-vdd-disp-3v3: disabling [ 35.910442] en-mdm-pwr-3v7: disabling [ 35.910445] en-vdd-disp-1v8: disabling [ 35.910448] en-vdd-cam-hv-2v8: disabling [ 35.910451] en-vdd-cam-1v2: disabling [ 35.910454] vdd-fan: disabling [ 35.910457] vdd-3v3: disabling [ 35.910460] en-vdd-vcm-2v8: disabling [ 35.910463] vdd-usb2-5v: disabling [ 35.910466] vdd-sys-bl: disabling [ 35.910469] en-vdd-sys: disabling [ 817.952634] tegradc 15210000.nvdisplay: unblank [ 821.115320] fuse init (API version 7.26) [ 824.965324] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 824.965339] Bluetooth: BNEP socket layer initialized [ 825.953788] tegradc 15210000.nvdisplay: unblank [ 861.065522] tegradc 15210000.nvdisplay: blank - powerdown [ 861.123703] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 861.123711] Extcon AUX1(HDMI) disable [ 861.146582] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 861.146748] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 861.147523] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 861.147909] tegradc 15210000.nvdisplay: unblank [ 861.152665] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 861.152805] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 861.152933] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 861.155342] Parent Clock set for DC plld2 [ 861.163141] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 861.164637] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 861.170349] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 861.170354] Extcon AUX1(HDMI) enable [ 861.170931] tegradc 15210000.nvdisplay: unblank [ 874.698769] tegradc 15210000.nvdisplay: blank - powerdown [ 874.765219] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 874.765230] Extcon AUX1(HDMI) disable [ 874.794825] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 874.794962] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 874.797807] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 874.798632] tegradc 15210000.nvdisplay: unblank [ 874.802134] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 874.804459] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 874.804676] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 874.812919] Parent Clock set for DC plld2 [ 874.816720] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 874.821258] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 874.826435] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 874.826446] Extcon AUX1(HDMI) enable [ 874.827687] tegradc 15210000.nvdisplay: unblank [ 908.224812] tegradc 15210000.nvdisplay: blank - powerdown [ 908.288660] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 908.288662] Extcon AUX1(HDMI) disable [ 908.309963] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 908.310040] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 908.310494] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 908.310640] tegradc 15210000.nvdisplay: unblank [ 908.311231] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 908.311314] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 908.311395] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 908.312675] Parent Clock set for DC plld2 [ 908.315962] tegradc 15210000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 908.317175] tegradc 15210000.nvdisplay: hdmi: get YCC quant from EDID. [ 908.327511] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 908.327512] Extcon AUX1(HDMI) enable [ 908.327605] tegradc 15210000.nvdisplay: unblank [11873.489549] usb 1-2.2.3: USB disconnect, device number 8 [11873.491508] asix 1-2.2.3:1.0 eth2: unregister 'asix' usb-3530000.xhci-2.2.3, ASIX AX88772B USB 2.0 Ethernet [11875.794823] usb 2-1.2.3: new SuperSpeed USB device number 5 using tegra-xusb [11875.820262] usb 2-1.2.3: New USB device found, idVendor=05e3, idProduct=0749 [11875.820290] usb 2-1.2.3: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [11875.820309] usb 2-1.2.3: Product: USB3.0 Card Reader [11875.820324] usb 2-1.2.3: Manufacturer: Generic [11875.820339] usb 2-1.2.3: SerialNumber: 000000001536 [11875.828881] usb-storage 2-1.2.3:1.0: USB Mass Storage device detected [11875.829097] scsi host3: usb-storage 2-1.2.3:1.0 [11876.832156] scsi 3:0:0:0: Direct-Access Generic MassStorageClass 1536 PQ: 0 ANSI: 6 [11877.045797] scsi 3:0:0:1: Direct-Access Generic MassStorageClass 1536 PQ: 0 ANSI: 6 [11877.055196] sd 3:0:0:0: [sdb] Attached SCSI removable disk [11877.405471] sd 3:0:0:1: [sdc] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB) [11877.610283] sd 3:0:0:1: [sdc] Write Protect is off [11877.615230] sd 3:0:0:1: [sdc] Mode Sense: 21 00 00 00 [11877.616278] sd 3:0:0:1: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [11877.639746] sdc: sdc1 [11877.642573] sd 3:0:0:1: [sdc] Attached SCSI removable disk [11889.299497] usb 2-1.2.3: Disable of device-initiated U1 failed. [11889.307826] usb 2-1.2.3: Disable of device-initiated U2 failed. [11890.007365] usb 2-1.2.3: USB disconnect, device number 5 [11892.398252] usb 1-2.2.3: new high-speed USB device number 9 using tegra-xusb [11892.433074] usb 1-2.2.3: New USB device found, idVendor=0b95, idProduct=772b [11892.433106] usb 1-2.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [11892.433125] usb 1-2.2.3: Product: AX88772C [11892.433139] usb 1-2.2.3: Manufacturer: ASIX Elec. Corp. [11892.433156] usb 1-2.2.3: SerialNumber: 0018DA [11892.863203] asix 1-2.2.3:1.0 eth2: register 'asix' at usb-3530000.xhci-2.2.3, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:d1:44:34 [11893.040370] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [11893.041887] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [11895.892458] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [11895.897413] asix 1-2.2.3:1.0 eth2: link up, 100Mbps, full-duplex, lpa 0xCDE1 [11899.857781] usb 1-2.2.3: USB disconnect, device number 9 [11899.861783] asix 1-2.2.3:1.0 eth2: unregister 'asix' usb-3530000.xhci-2.2.3, ASIX AX88772B USB 2.0 Ethernet [11905.454376] usb 1-2.2.3: new high-speed USB device number 10 using tegra-xusb [11905.477145] usb 1-2.2.3: New USB device found, idVendor=0781, idProduct=5591 [11905.477173] usb 1-2.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [11905.477193] usb 1-2.2.3: Product: Ultra USB 3.0 [11905.477208] usb 1-2.2.3: Manufacturer: SanDisk [11905.477225] usb 1-2.2.3: SerialNumber: 4C530001310612100195 [11905.481337] usb-storage 1-2.2.3:1.0: USB Mass Storage device detected [11905.486539] scsi host3: usb-storage 1-2.2.3:1.0 [11906.496119] scsi 3:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 [11906.504876] sd 3:0:0:0: [sdb] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB) [11906.513445] sd 3:0:0:0: [sdb] Write Protect is off [11906.518454] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00 [11906.519007] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [11906.540413] sdb: sdb4 [11906.542181] sd 3:0:0:0: [sdb] Attached SCSI removable disk