[0000.060] I> MB1 (version: 0.23.0.0-t234-54845784-92215740) [0000.066] I> t234-A01-0-Silicon (0x12347) Prod [0000.070] I> Boot-mode : Coldboot [0000.073] I> Emulation: [0000.075] I> Entry timestamp: 0x00000000 [0000.079] I> last_boot_error: 0x0 [0000.082] I> BR-BCT: preprod_dev_sign: 0 [0000.086] I> rst_source: 0x0, rst_level: 0x0 [0000.090] I> Task: CRC check (0x5001cf71) [0000.094] I> Skip CRC check as records_integrity fuse is not burned [0000.100] I> Task: Crypto init (0x5001c0d9) [0000.104] I> Task: Secure debug controls (0x5000cb19) [0000.109] I> Task: strap war set (0x5000b739) [0000.113] I> strap value(0x4000401) set to 0x4000401 [0000.118] I> Task: Initialize SOC Therm (0x5001a509) [0000.123] I> Task: Program NV master stream id (0x5000cad1) [0000.128] I> Task: Verify boot mode (0xd482021) [0000.134] I> Task: Alias fuses (0x50010749) [0000.139] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.146] I> Task: Print SKU type (0x5000fba9) [0000.150] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.156] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.160] I> FUSE_OPT_TPC_DISABLE = 0x00000000 [0000.164] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.168] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.173] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.177] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.181] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.185] I> FUSE_SKU_INFO_0 = 0xd0 [0000.188] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.192] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.196] I> SKU: Prod [0000.198] I> Task: Boost clocks (0x50013db1) [0000.202] I> Initializing PLLC2 for AXI_CBB. [0000.207] I> AXI_CBB : src = 35, divisor = 0 [0000.211] I> Task: Voltage monitor (0x50013dbd) [0000.215] I> VMON: Vmon re-calibration and fine tuning done [0000.220] I> Task: UPHY init (0x5000da39) [0000.225] E> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.231] I> Task: Boot device init (0x50000a3d) [0000.235] I> Boot_device: QSPI_FLASH instance: 0 [0000.240] I> Qspi clock source : pllc_out0 [0000.244] I> QSPI Flash: Macronix 64MB [0000.247] I> QSPI-0l initialized successfully [0000.252] I> Task: TSC init (0x5001ed35) [0000.256] I> Task: Load membct (0x5001190d) [0000.260] I> RAM_CODE 0x4000401 [0000.263] I> Loading MEM-BCT to SysRAM [0000.266] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.272] I> Slot: 0 [0000.274] I> Binary[0] block-0 (partition size: 0x40000) [0000.279] I> get_binary_info: Binary name: MEM-BCT-0 [0000.284] I> Size of crypto header is 8192 [0000.288] I> BCH load address is : 0x40050000 [0000.292] I> Size of crypto header is 8192 [0000.296] I> BCH of MEM-BCT-0 read from storage [0000.300] I> BCH address is : 0x40050000 [0000.304] I> MEM-BCT-0 header integrity check is success [0000.309] I> Binary magic in BCH component 0 is MEM0 [0000.314] I> component binary type is 0 [0000.318] I> MEM-BCT-0 binary is read from storage [0000.323] I> MEM-BCT-0 binary integrity check is success [0000.328] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.335] I> RAM_CODE 0x4000401 [0000.340] I> RAM_CODE 0x4000401 [0000.344] I> Task: Load Page retirement list (0x50011139) [0000.349] I> Task: SDRAM params override (0x50011b79) [0000.354] I> Task: Save mem-bct info (0x50014071) [0000.359] I> Task: Carveout allocate (0x500140d5) [0000.363] I> RCM blob carveout will not be allocated [0000.368] I> ECC region[0]: Start:0x0, End:0x0 [0000.372] I> ECC region[1]: Start:0x0, End:0x0 [0000.377] I> ECC region[2]: Start:0x0, End:0x0 [0000.381] I> ECC region[3]: Start:0x0, End:0x0 [0000.385] I> ECC region[4]: Start:0x0, End:0x0 [0000.390] I> Non-ECC region[0]: Start:0x80000000, End:0x880000000 [0000.395] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.400] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.405] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.409] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.419] I> allocated(CO:44) base:0x849800000 size:0x36800000 align: 0x100000 [0000.426] I> allocated(CO:31) base:0x840000000 size:0x8000000 align: 0x8000000 [0000.433] I> allocated(CO:39) base:0x83a000000 size:0x6000000 align: 0x200000 [0000.440] I> allocated(CO:20) base:0x838000000 size:0x2000000 align: 0x2000000 [0000.447] I> allocated(CO:24) base:0x836000000 size:0x2000000 align: 0x2000000 [0000.454] I> allocated(CO:28) base:0x834000000 size:0x2000000 align: 0x2000000 [0000.462] I> allocated(CO:29) base:0x832000000 size:0x2000000 align: 0x2000000 [0000.469] I> allocated(CO:43) base:0x830000000 size:0x2000000 align: 0x200000 [0000.476] I> allocated(CO:22) base:0x848000000 size:0x1000000 align: 0x1000000 [0000.483] I> allocated(CO:41) base:0x82f000000 size:0x1000000 align: 0x100000 [0000.490] I> allocated(CO:02) base:0x849000000 size:0x800000 align: 0x800000 [0000.497] I> allocated(CO:03) base:0x82e800000 size:0x800000 align: 0x800000 [0000.504] I> allocated(CO:06) base:0x82e000000 size:0x800000 align: 0x800000 [0000.511] I> allocated(CO:10) base:0x82d800000 size:0x800000 align: 0x800000 [0000.518] I> allocated(CO:56) base:0x82d000000 size:0x800000 align: 0x200000 [0000.524] I> allocated(CO:07) base:0x82cc00000 size:0x400000 align: 0x400000 [0000.531] I> allocated(CO:33) base:0x82c800000 size:0x400000 align: 0x200000 [0000.538] I> allocated(CO:47) base:0x82c400000 size:0x400000 align: 0x200000 [0000.545] I> allocated(CO:72) base:0x82c200000 size:0x200000 align: 0x10000 [0000.552] I> allocated(CO:01) base:0x82c100000 size:0x100000 align: 0x100000 [0000.559] I> allocated(CO:04) base:0x82c000000 size:0x100000 align: 0x100000 [0000.566] I> allocated(CO:05) base:0x82bf00000 size:0x100000 align: 0x100000 [0000.573] I> allocated(CO:08) base:0x82be00000 size:0x100000 align: 0x100000 [0000.580] I> allocated(CO:09) base:0x82bd00000 size:0x100000 align: 0x100000 [0000.587] I> allocated(CO:15) base:0x82bc00000 size:0x100000 align: 0x100000 [0000.594] I> allocated(CO:17) base:0x82bb00000 size:0x100000 align: 0x100000 [0000.600] I> allocated(CO:23) base:0x82ba00000 size:0x100000 align: 0x100000 [0000.607] I> allocated(CO:27) base:0x82b900000 size:0x100000 align: 0x100000 [0000.614] I> allocated(CO:42) base:0x82b800000 size:0x100000 align: 0x100000 [0000.621] I> allocated(CO:54) base:0x82b780000 size:0x80000 align: 0x80000 [0000.628] I> allocated(CO:26) base:0x82b740000 size:0x40000 align: 0x2000 [0000.635] I> allocated(CO:48) base:0x82b720000 size:0x20000 align: 0x10000 [0000.641] I> allocated(CO:69) base:0x82b700000 size:0x20000 align: 0x10000 [0000.648] I> allocated(CO:34) base:0x82b6f0000 size:0x10000 align: 0x10000 [0000.655] I> allocated(CO:35) base:0x82b6e0000 size:0x10000 align: 0x10000 [0000.662] I> allocated(CO:49) base:0x82b6d0000 size:0x10000 align: 0x10000 [0000.668] I> allocated(CO:50) base:0x82b6c0000 size:0x10000 align: 0x10000 [0000.675] I> allocated(CO:52) base:0x82b6b0000 size:0x10000 align: 0x10000 [0000.682] I> Task: Thermal check (0x5001fba1) [0000.686] I> max_chip_limit = 115 [0000.689] I> min_chip_limit = -30 [0000.692] I> max temp read = 55 [0000.695] I> min temp read = 51 [0000.698] I> Task: Update FSI SCR with thermal fuse data (0x5001fc3d) [0000.705] I> Task: Enable WDT 5th expiry (0x5001f929) [0000.709] I> Task: Disable WDT globally (0x5001f965) [0000.714] I> Task: I2C register (0x50000a31) [0000.718] I> Task: Reset FSI (0x50013db9) [0000.722] I> Task: Pinmux init (0x50013219) [0000.727] I> Task: Prod config init (0x50013631) [0000.731] I> Task: Pad voltage init (0x500132a5) [0000.736] I> Task: Prod init (0x500136d5) [0000.739] I> Task: Common rail init (0x50013bd1) [0000.744] W> Thermal config not found in BCT [0000.748] W> Generic i2c config not found in BCT [0000.753] W> Platform rail config not found in BCT [0000.758] W> DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.766] W> MEMIO rail config not found in BCT [0000.770] I> Task: Mem clock src (0x500119c5) [0000.775] I> Task: Misc. board config (0x50013c29) [0000.779] W> Platform config not found in BCT [0000.784] I> Task: SDRAM init (0x500119c9) [0000.790] I> SDRAM-params @ 0xd485000 [0000.794] I> MSS code-drop: NvBootSdramInit [0000.798] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision: 8 [0000.805] I> MSS CAR: Init PLLM [0000.808] I> MSS CAR: Init PLLHUB [0000.813] I> Encryption: MTS: en, TX: dis, VPR: dis, GSC: en [0000.825] I> mb1_sdram_init Done ! [0000.828] I> SDRAM Size in Total 0x800000000 [0000.832] I> Task: Dram Ecc scrub (0x50011261) [0000.836] I> Task: DRAM alias check (0x50011b71) [0000.867] I> Task: Program NSDRAM carveout (0x50014921) [0000.874] I> NSDRAM carveout encryption is disabled [0000.879] I> Program NSDRAM carveout [0000.883] I> Task: Register checker (0x50011b75) [0000.892] I> Task: Enable clock-mon (0x5001ed25) [0000.908] I> FMON: Fmon re-programming done [0000.913] I> Task: Mapper init (0x5001d451) [0000.918] I> Task: SC7 Context Init (0x5001f02d) [0000.924] I> Task: CCPLEX IST init (0x5000d335) [0000.930] I> Task: CPU WP0 (0x5000c635) [0000.935] I> Loading MCE [0000.938] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.944] I> Slot: 0 [0000.946] I> Binary[8] block-0 (partition size: 0x80000) [0000.952] I> get_binary_info: Binary name: MCE [0000.957] I> Size of crypto header is 8192 [0000.962] I> BCH load address is : 0x4003e000 [0000.967] I> Size of crypto header is 8192 [0000.972] I> BCH of MCE read from storage [0000.976] I> BCH address is : 0x4003e000 [0000.981] I> MCE header integrity check is success [0000.987] I> Binary magic in BCH component 0 is MTSM [0000.992] I> component binary type is 8 [0000.996] I> Size of crypto header is 8192 [0001.002] I> MCE binary is read from storage [0001.008] I> MCE binary integrity check is success [0001.013] I> Binary MCE loaded successfully at 0x40000000 (0x2c080) [0001.021] I> Size of crypto header is 8192 [0001.035] I> Size of crypto header is 8192 [0001.040] I> Sending WP0 mailbox command to PSC [0001.050] I> Task: MB1 fixed firewalls (0x5001e55d) [0001.070] I> Task: Load bpmp-fw (0x5001e801) [0001.075] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.081] I> Slot: 0 [0001.083] I> Binary[15] block-0 (partition size: 0x180000) [0001.090] I> get_binary_info: Binary name: BPMP_FW [0001.095] I> Size of crypto header is 8192 [0001.099] I> BCH load address is : 0x807fe000 [0001.105] I> Size of crypto header is 8192 [0001.110] I> BCH of BPMP_FW read from storage [0001.114] I> BCH address is : 0x807fe000 [0001.120] I> BPMP_FW header integrity check is success [0001.125] I> Binary magic in BCH component 0 is BPMF [0001.131] I> component binary type is 15 [0001.135] I> Size of crypto header is 8192 [0001.150] I> BPMP_FW binary is read from storage [0001.157] I> BPMP_FW binary integrity check is success [0001.163] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xfb3c0) [0001.171] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.177] I> Slot: 0 [0001.179] I> Binary[16] block-10000 (partition size: 0x400000) [0001.186] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.191] I> Size of crypto header is 8192 [0001.196] I> BCH load address is : 0x807fc000 [0001.201] I> Size of crypto header is 8192 [0001.206] I> BCH of BPMP_FW_DTB read from storage [0001.211] I> BCH address is : 0x807fc000 [0001.217] I> BPMP_FW_DTB header integrity check is success [0001.223] I> Binary magic in BCH component 0 is BPMD [0001.228] I> component binary type is 16 [0001.232] I> Size of crypto header is 8192 [0001.238] I> BPMP_FW_DTB binary is read from storage [0001.244] I> BPMP_FW_DTB binary integrity check is success [0001.250] I> Binary BPMP_FW_DTB loaded successfully at 0x807db9f0 (0x204c0) [0001.259] I> Task: Load psc-fw (0x5001ea0d) [0001.265] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.270] I> Slot: 0 [0001.273] I> Binary[17] block-0 (partition size: 0xc0000) [0001.279] I> get_binary_info: Binary name: PSC_FW [0001.284] I> Size of crypto header is 8192 [0001.289] I> BCH load address is : 0x80ffe000 [0001.294] I> Size of crypto header is 8192 [0001.299] I> BCH of PSC_FW read from storage [0001.303] I> BCH address is : 0x80ffe000 [0001.309] I> PSC_FW header integrity check is success [0001.314] I> Binary magic in BCH component 0 is PFWP [0001.320] I> component binary type is 17 [0001.324] I> Size of crypto header is 8192 [0001.334] I> PSC_FW binary is read from storage [0001.340] I> PSC_FW binary integrity check is success [0001.345] I> Binary PSC_FW loaded successfully at 0x80000000 (0x7d000) [0001.354] I> Task: Load nvdec-fw (0x5001ea81) [0001.359] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.365] I> Slot: 0 [0001.368] I> Binary[7] block-0 (partition size: 0x100000) [0001.374] I> get_binary_info: Binary name: NVDEC [0001.379] I> Size of crypto header is 8192 [0001.383] I> BCH load address is : 0x800fe000 [0001.389] I> Size of crypto header is 8192 [0001.394] I> BCH of NVDEC read from storage [0001.398] I> BCH address is : 0x800fe000 [0001.404] I> NVDEC header integrity check is success [0001.409] I> Binary magic in BCH component 0 is NDEC [0001.414] I> component binary type is 7 [0001.418] I> Size of crypto header is 8192 [0001.425] I> NVDEC binary is read from storage [0001.431] I> NVDEC binary integrity check is success [0001.436] I> Binary NVDEC loaded successfully at 0x80000000 (0x35000) [0001.447] I> Task: Load tsec-fw (0x5001ec6d) [0001.452] I> TSEC-FW load support not enabled [0001.457] I> Task: Program misc carveouts (0x5001445d) [0001.463] I> Program IPC carveouts [0001.470] I> Task: GPIO interrupt map (0x50013cc5) [0001.476] I> Task: SC7 context save (0x5001f161) [0001.482] I> NV_SC7 Context addr: 0xa0000000 [0001.488] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.493] I> Slot: 0 [0001.496] I> Binary[27] block-0 (partition size: 0x100000) [0001.502] I> get_binary_info: Binary name: BR_BCT [0001.507] I> Size of crypto header is 8192 [0001.512] I> Size of crypto header is 8192 [0001.517] I> BR_BCT binary is read from storage [0001.522] I> BR_BCT binary integrity check is success [0001.527] I> Binary BR_BCT loaded successfully at 0xa0000000 (0x2000) [0001.535] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.541] I> Slot: 0 [0001.543] I> Binary[13] block-0 (partition size: 0x30000) [0001.549] I> get_binary_info: Binary name: SC7-FW [0001.554] I> Size of crypto header is 8192 [0001.559] I> Size of crypto header is 8192 [0001.563] I> BCH load address is : 0xa0002000 [0001.569] I> Size of crypto header is 8192 [0001.574] I> BCH of SC7-FW read from storage [0001.578] I> BCH address is : 0xa0002000 [0001.584] I> SC7-FW header integrity check is success [0001.589] I> Binary magic in BCH component 0 is WB0B [0001.595] I> component binary type is 13 [0001.599] I> Size of crypto header is 8192 [0001.605] I> SC7-FW binary is read from storage [0001.611] I> SC7-FW binary integrity check is success [0001.616] I> Binary SC7-FW loaded successfully at 0xa0004000 (0x25460) [0001.624] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.630] I> Slot: 0 [0001.632] I> Binary[22] block-0 (partition size: 0x30000) [0001.638] I> get_binary_info: Binary name: PSC_RF [0001.644] I> Size of crypto header is 8192 [0001.648] I> Size of crypto header is 8192 [0001.653] I> BCH load address is : 0xa0029460 [0001.658] I> Size of crypto header is 8192 [0001.663] I> BCH of PSC_RF read from storage [0001.668] I> BCH address is : 0xa0029460 [0001.673] I> PSC_RF header integrity check is success [0001.678] I> Binary magic in BCH component 0 is PSCR [0001.684] I> component binary type is 22 [0001.688] I> Size of crypto header is 8192 [0001.694] I> PSC_RF binary is read from storage [0001.699] I> PSC_RF binary integrity check is success [0001.705] I> Binary PSC_RF loaded successfully at 0xa002b460 (0x1bd20) [0001.725] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.731] I> Slot: 0 [0001.733] I> Binary[14] block-0 (partition size: 0x20000) [0001.739] I> get_binary_info: Binary name: MB2_RF [0001.744] I> Size of crypto header is 8192 [0001.749] I> Size of crypto header is 8192 [0001.753] I> BCH load address is : 0xa008e240 [0001.759] I> Size of crypto header is 8192 [0001.764] I> BCH of MB2_RF read from storage [0001.768] I> BCH address is : 0xa008e240 [0001.774] I> MB2_RF header integrity check is success [0001.779] I> Binary magic in BCH component 0 is MB2R [0001.784] I> component binary type is 14 [0001.789] I> Size of crypto header is 8192 [0001.795] I> MB2_RF binary is read from storage [0001.800] I> MB2_RF binary integrity check is success [0001.805] I> Binary MB2_RF loaded successfully at 0xa0090240 (0x1bdc0) [0001.814] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.821] I> SC7 context fuse-bypass data is empty [0001.829] I> SC7 context save done [0001.833] I> Task: Load MB2/Applet/FSKP (0x5000d451) [0001.839] I> Loading MB2 [0001.842] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.848] I> Slot: 0 [0001.850] I> Binary[6] block-0 (partition size: 0x80000) [0001.856] I> get_binary_info: Binary name: MB2 [0001.861] I> Size of crypto header is 8192 [0001.866] I> BCH load address is : 0x8007e000 [0001.871] I> Size of crypto header is 8192 [0001.876] I> BCH of MB2 read from storage [0001.880] I> BCH address is : 0x8007e000 [0001.886] I> MB2 header integrity check is success [0001.891] I> Binary magic in BCH component 0 is MB2B [0001.896] I> component binary type is 6 [0001.900] I> Size of crypto header is 8192 [0001.909] I> MB2 binary is read from storage [0001.915] I> MB2 binary integrity check is success [0001.920] I> Binary MB2 loaded successfully at 0x80000000 (0x686c0) [0001.928] I> Task: Map CCPLEX SHARED carveout (0x5000d521) [0001.935] I> Task: Prepare MB2 params (0x5000d5dd) [0001.944] I> MB2-params @ 0x40060000 [0001.952] I> BR-BCT Boot Chain Fields [0001.956] I> u32_non_gpio_select_boot_chain : 0 [0001.961] I> u32_num_boot_chains : 2 [0001.966] I> bf_bl_gpio_select_boot_chain_1b : 0 [0001.972] I> Task: Dram ecc test (0x500112cd) [0001.978] I> Task: Misc NV security settings (0x5000ced5) [0001.984] I> NVDEC sticky bits programming done [0001.989] I> Task: Disable/Reload WDT (0x5001f991) [0001.995] I> Programmed SLCG global override := 0x0 [0002.000] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-e33bc3dc) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x001f15e9 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0x82d000000, size:0x800000] I> Task: ARI update carveout TZDRAM (0x50001e6c) I> Task: Enable hot-plug capability (0x50020e7c) I> Task: PSC mailbox init (0x50011ed0) I> Task: Crypto init (0x5000513c) I> Task: Enable GP-SE clock (0x50001fd0) I> Task: I2C register (0x50001e30) I> Task: Map CCPLEX_INTERWORLD_SHMEM carveout (0x50001e18) I> Task: Boot device init (0x50001d60) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> Task: Partition Manager Init (0x50001d5c) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 12 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x50017428) I> Task: Load AUXP FWs (0x50020a1c) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-55040 (partition size: 0x90000), name: A_spe-fw I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-56192 (partition size: 0x100000), name: A_rce-fw I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0x82be00000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 5242880 I> Binary@ device:3/0 block-44800 (partition size: 0x500000), name: A_dce-fw I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0x82bb00000 I> dce : oem authentication of header done I> dce : meta-blob integrity check is success. I> dce : will be decompressed at 0x838000000 I> version 1 Bin 1 BCheckSum 0 content_size 0 Content ChkSum 1 reserved_00 0 I> Reserved10 0 BlockMaxSize 5 Reserved11 0 I> dce : decompressed to 9464000 bytes I> dce: plain binary integrity check is success I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-58240 (partition size: 0x200000), name: A_adsp-fw I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0x838000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-9472 (partition size: 0x40000), name: A_xusb-fw I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0x82cc00000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0x82bf00000 I> Task: Carveout setup (0x50019c94) I> Program remaining OEM carveouts I> Task: Enable FSITHERM (0x50011da4) I> Task: Enable FSI VMON (0x50011944) I> FSI VMON: FSI Vmon re-calibration and fine tuning done I> Task: Validate FSI Therm readings (0x5001199c) I> FSITHERM max temp = 52 I> FSITHERM min temp = 50 I> Task: Restore XUSB sec (0x50001d30) I> Task: Enable FSI SE clock (0x5001232c) I> Enable FSI-SE clock and 10ms delay... I> Task: Initialize SBSA UART CAR (0x50001f34) I> Task: Initialize CPUBL Params (0x50013384) I> CPUBL-params @ 0x834000000 I> Task: Prepare eeprom data (0x50013140) I> Task: OEM firewalls (0x5001df14) W> mb2_unpowergate_ape: skip! APE is in unpowergated state I> OEM firewalls configured I> Task: Unhalt AUXPs (0x50020c84) I> Unhalting SPE.. I> Enabling combined UART ����spe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 2e3d77fae66a40ac8e7a91531ae7d9b3 spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler �� I> Task: Trigger mailbox for PSC-BL1 exit (0x50011f50) I> Sending opcode 0x4d420802 to psc ��INFO: Entering psc_monitor_init! INFO: GSC22 BOM:0x848000000 SIZE:0x1000000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: e061f86-9e1f578-2508c43-dev-t234 INFO: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 ��I> Received ACK from psc I> Task: Sta��INFO: MONITOR: user task addr:0x848022000, blob offset:0x00020000 �� ��rt secure NOR provision (0x50014924) I> Task: Load FSI keyblob (0x50012368) I> Skipping FSI key blob copy I> Task: Unhalt AUXPs (0x50020c8c) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x5001347c) I> Task: Load TOS (0x50013b38) I> Task: Load and authenticate registered FWs (0x50017428) I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_cpu��[ 2.360676] Camera-FW on t234-rce-safe started ��INFO: MONITOR: populated user images:19 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. ��bpmp: init bpmp: base binary md5 is eac3805��TCU early console ena��26d68ff45ffc86d0feae98e88 bpmp: combined binary md5 is 888a114dda6bea50b6c6bb��bled. ��224445ac85 bpmp: firmware tag is 888a114dda6bea50b6c6-eac380526d6 initialized vwdt initialized mail_early initialized fuse initialized vfrel initialized hwwdt initialized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 471 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized thermal initialized soctherm initialized tj_init initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors initialized vrmon initialized regulator �� ��-bootloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-24832 (partition size: 0x380000), name: A_cpu-bootloader��initialized avfs_clk_platform initialized powergate �� ��initialized dvs initialized clk_mach_config initialized pm initialized suspend initialized strap initialized emc initialized emc_mrq initialized clk_cal initialized uphy_dt initialized uphy_mrq initialized uphy ��I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-32000 (partition size: 0x400000), name: A_secure-os ��initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized oc_mrq initialized reset_mrq initialized mail_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq initialized mce_dbell missing prod DT calibration data for 199 fmons initialized clk_sync_fmon_post ��I> MB2-params @ 0x40060000 ��initialized clk_cal_late initialized noc_late initialized dmce initialized cvc ��I> cpubl: Authentication Finalize Do��initialized avfs_clk_mach_post initialized pm_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late handling unreferenced clks enable adspneon enable can1_core enable can1_host enable can2_core enable can2_host enable mss_encrypt enable maud enable nvdec enable pllg_ref enable dsi_core enable aza_2xbit enable pllc4_muxed enable xusb_ss enable xusb_fs enable xusb_falcon enable xusb_core_mux enable dsi_lp enable sdmmc_legacy_tm ��[ 2.600430] Camera-FW on t234-rce-safe ready SHA1=7a10e461 (crt 13.249 ms,��initialized clk_mach_post initialized pg_post initialized regulator_post initialized profile initialized fuse_late initialized mrq�� total boot 262.318 m�� initialized patrol_scrubber initialized extras_post bpmp: init complete ��s) ��ne I> Binary cpubl loaded successfully at 0x82c400000 ��DCE: FW Boot Done ��I> tos: Authentication Finalize Done I> Binary tos loaded successfully at 0x831e06000 I> Relocating OP-TEE dtb from: 0x831eff700 to 0x82b700000, size: 0x996 I> [0] START: 0x80000000, SIZE: 0x7ab600000 I> [1] START: 0x82c400000, SIZE: 0x400000 I> [2] START: 0x82d000000, SIZE: 0x800000 I> Setting NS memory ranges to OP-TEE dtb finished. I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_eks I> Size of partition: 262144 I> Binary@ device:3/0 block-44288 (partition size: 0x40000), name: A_eks I> eks: Authentication Finalize Done I> Binary eks loaded successfully at 0x82d000400 I> EKB detected (length: 0x410) @ VA:0x82d000400 I> Task: Prepare TOS params (0x50013ab0) I> Setting EKB blob info to OPTEE dtb finished. I> Setting OPTEE arg3: 0x82b700000 I> Task: OEM SC7 context save (0x500146bc) I> oem sc7 context saved I> Task: Disable MSS perf stats (0x50020d18) I> Task: Program display sticky bits (0x50020c94) I> Task: Storage device deinit (0x50001ed8) I> Task: SMMU external bypass disable (0x50011eb4) I> Task: SMMU init (0x50011dd0) I> Task: Program CBB PCIE AMAP regions (0x50014b08) I> Task: Program GICv3 registers (0x50020db8) I> Task: Audit firewall settings (0x5001e1c0) I> Task: Bootchain failure check (0x500026a4) I> Current Boot-Chain Slot: 0 I> BR-BCT Boot-Chain is 0, and status is 1. Set UPDATE_BRBCT bit to 0 I> MB2 finished ��NOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: I/TC: Non-secure external DT found I/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 03:23:19 UTC 2022 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: WARNING: Test OEM keys are being used! I/TC: This is only for TZ-SE testing and should NOT be used for a shipping product! E/TC:00 0 jetson_user_key_pta_init:700 jetson_user_key_pta_init: Failed (f0100006). E/TC:00 0 call_initcalls:43 Initcall __text_start + 0x000dab50 failed I/TC: Primary CPU switching to normal world boot �� Jetson UEFI firmware (version r35.0-66ea1afc-dirty built on 2022-10-28T20:38:25+08:00) L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ��I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot I/TC: Secondary CPU 8 initializing I/TC: Secondary CPU 8 switching to normal world boot I/TC: Secondary CPU 9 initializing I/TC: Secondary CPU 9 switching to normal world boot I/TC: Secondary CPU 10 initializing I/TC: Secondary CPU 10 switching to normal world boot I/TC: Secondary CPU 11 initializing I/TC: Secondary CPU 11 switching to normal world boot ��[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.104-tegra (zhidao@ubuntu) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld 2 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: Jetson AGX Orin [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x804d88f18 SMBIOS=0xffff0000 SMBIOS 3.0=0x7fffa0000 MEMATTR=0x8040ee018 ESRT=0x8022a6f98 RNG=0x827885718 ME [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000008022a6f98 to 0x00000008022a6fd0. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000817800000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000835ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fffdffff] [ 0.000000] node 0: [mem 0x00000000fffe0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000007ffc43fff] [ 0.000000] node 0: [mem 0x00000007ffc44000-0x00000007ffdeefff] [ 0.000000] node 0: [mem 0x00000007ffdef000-0x00000007fff8ffff] [ 0.000000] node 0: [mem 0x00000007fff90000-0x00000007fffaffff] [ 0.000000] node 0: [mem 0x00000007fffb0000-0x00000007ffffffff] [ 0.000000] node 0: [mem 0x0000000800000000-0x00000008021bffff] [ 0.000000] node 0: [mem 0x00000008021c0000-0x0000000803ebffff] [ 0.000000] node 0: [mem 0x0000000803ec0000-0x000000080404ffff] [ 0.000000] node 0: [mem 0x0000000804050000-0x00000008040bffff] [ 0.000000] node 0: [mem 0x00000008040c0000-0x00000008040dffff] [ 0.000000] node 0: [mem 0x00000008040e0000-0x00000008040fffff] [ 0.000000] node 0: [mem 0x0000000804100000-0x000000080431ffff] [ 0.000000] node 0: [mem 0x0000000804320000-0x000000080432ffff] [ 0.000000] node 0: [mem 0x0000000804330000-0x00000008043cffff] [ 0.000000] node 0: [mem 0x00000008043d0000-0x000000080449ffff] [ 0.000000] node 0: [mem 0x00000008044a0000-0x00000008047fffff] [ 0.000000] node 0: [mem 0x0000000804800000-0x000000080480ffff] [ 0.000000] node 0: [mem 0x0000000804810000-0x000000080489ffff] [ 0.000000] node 0: [mem 0x00000008048a0000-0x0000000804d2ffff] [ 0.000000] node 0: [mem 0x0000000804d30000-0x0000000804d5ffff] [ 0.000000] node 0: [mem 0x0000000804d60000-0x0000000804ecffff] [ 0.000000] node 0: [mem 0x0000000804ed0000-0x0000000804f6ffff] [ 0.000000] node 0: [mem 0x0000000804f70000-0x000000080506ffff] [ 0.000000] node 0: [mem 0x0000000805070000-0x000000080510ffff] [ 0.000000] node 0: [mem 0x0000000805110000-0x00000008051bffff] [ 0.000000] node 0: [mem 0x00000008051c0000-0x000000080525ffff] [ 0.000000] node 0: [mem 0x0000000805260000-0x0000000805c6ffff] [ 0.000000] node 0: [mem 0x0000000805c70000-0x0000000805e4ffff] [ 0.000000] node 0: [mem 0x0000000805e50000-0x000000082783ffff] [ 0.000000] node 0: [mem 0x0000000827840000-0x000000082788ffff] [ 0.000000] node 0: [mem 0x0000000827890000-0x000000082b6affff] [ 0.000000] node 0: [mem 0x000000082c400000-0x000000082c7fffff] [ 0.000000] node 0: [mem 0x0000000834000000-0x0000000835ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000835ffffff] [ 0.000000] On node 0, zone Normal: 336 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7925040 [ 0.000000] Kernel command line: root=PARTUUID=303de5be-8188-45f1-83a2-76a45488e562 rw rootwait rootfstype=ext4 mminit_loglevel=4 co [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB) [ 0.000000] Memory: 30994764K/32205504K available (18176K kernel code, 3162K rwdata, 7160K rodata, 3968K init, 1093K bss, 948596K re) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000002] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000750] Console: colour dummy device 80x25 [ 0.000932] printk: console [tty0] enabled [ 0.000968] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000976] pid_max: default: 32768 minimum: 301 [ 0.001038] LSM: Security Framework initializing [ 0.001061] Yama: becoming mindful. [ 0.001078] SELinux: Initializing. [ 0.001162] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.001209] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.003037] rcu: Hierarchical SRCU implementation. [ 0.003121] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.003657] DTS File Name: /home/zhidao/jenkins-workspace/workspace/MOGOOS-OS-A744/A744/Kernel_src/kernel/kernel-5.10/arch/arm64/boos [ 0.003666] DTB Build time: Nov 4 2022 13:18:30 [ 0.005090] Tegra Revision: A01 SKU: 0xd0 CPU Process: 0 SoC Process: 0 [ 0.005210] Remapping and enabling EFI services. [ 0.006413] smp: Bringing up secondary CPUs ... [ 0.035076] Detected PIPT I-cache on CPU1 [ 0.035112] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.035139] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.063750] Detected PIPT I-cache on CPU2 [ 0.063760] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.063774] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.092344] Detected PIPT I-cache on CPU3 [ 0.092353] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.092367] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.122980] Detected PIPT I-cache on CPU4 [ 0.123002] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c0000 [ 0.123027] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.151652] Detected PIPT I-cache on CPU5 [ 0.151662] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e0000 [ 0.151677] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.180270] Detected PIPT I-cache on CPU6 [ 0.180282] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f500000 [ 0.180297] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.208898] Detected PIPT I-cache on CPU7 [ 0.208908] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f520000 [ 0.208922] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.239548] Detected PIPT I-cache on CPU8 [ 0.239568] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f540000 [ 0.239593] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.268218] Detected PIPT I-cache on CPU9 [ 0.268228] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f560000 [ 0.268243] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.297453] Detected PIPT I-cache on CPU10 [ 0.297463] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f580000 [ 0.297479] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.326680] Detected PIPT I-cache on CPU11 [ 0.326690] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a0000 [ 0.326706] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.326761] smp: Brought up 1 node, 12 CPUs [ 0.326827] SMP: Total of 12 processors activated. [ 0.326831] CPU features: detected: Privileged Access Never [ 0.326833] CPU features: detected: LSE atomic instructions [ 0.326836] CPU features: detected: User Access Override [ 0.326838] CPU features: detected: 32-bit EL0 Support [ 0.326841] CPU features: detected: Common not Private translations [ 0.326844] CPU features: detected: RAS Extension Support [ 0.326846] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.326850] CPU features: detected: CRC32 instructions [ 0.326852] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.360315] CPU: All CPU(s) started at EL2 [ 0.362539] devtmpfs: initialized [ 0.377055] Registered cp15_barrier emulation handler [ 0.377066] Registered setend emulation handler [ 0.377071] KASLR enabled [ 0.377186] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.377199] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.378767] pinctrl core: initialized pinctrl subsystem [ 0.379258] SMBIOS 3.0.0 present. [ 0.379264] DMI: /, BIOS r35.0-66ea1afc-dirty 10/28/2022 [ 0.379508] NET: Registered protocol family 16 [ 0.380343] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.380546] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.380741] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.380767] audit: initializing netlink subsys (disabled) [ 0.380850] audit: type=2000 audit(0.380:1): state=initialized audit_enabled=0 res=1 [ 0.381012] thermal_sys: Registered thermal governor 'step_wise' [ 0.381014] thermal_sys: Registered thermal governor 'power_allocator' [ 0.381018] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.383070] cpuidle: using governor menu [ 0.383183] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.383299] ASID allocator initialised with 32768 entries [ 0.383387] Serial: AMBA PL011 UART driver [ 0.384943] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.384966] Tegra reboot handler registered. [ 0.403719] mc: mapped MMIO address: 0xffff8000111f0000 -> 0x2c10000 [ 0.403733] mc: mapped MMIO address: 0xffff800011210000 -> 0x2c20000 [ 0.403740] mc: mapped MMIO address: 0xffff800011230000 -> 0x2c30000 [ 0.403747] mc: mapped MMIO address: 0xffff800011250000 -> 0x2c40000 [ 0.403754] mc: mapped MMIO address: 0xffff800011270000 -> 0x2c50000 [ 0.403761] mc: mapped MMIO address: 0xffff800011290000 -> 0x2b80000 [ 0.403768] mc: mapped MMIO address: 0xffff8000112b0000 -> 0x2b90000 [ 0.403774] mc: mapped MMIO address: 0xffff8000112d0000 -> 0x2ba0000 [ 0.403780] mc: mapped MMIO address: 0xffff8000112f0000 -> 0x2bb0000 [ 0.403787] mc: mapped MMIO address: 0xffff800011310000 -> 0x1700000 [ 0.403794] mc: mapped MMIO address: 0xffff800011330000 -> 0x1710000 [ 0.403800] mc: mapped MMIO address: 0xffff800011350000 -> 0x1720000 [ 0.403806] mc: mapped MMIO address: 0xffff800011370000 -> 0x1730000 [ 0.403813] mc: mapped MMIO address: 0xffff800011390000 -> 0x1740000 [ 0.403819] mc: mapped MMIO address: 0xffff8000113b0000 -> 0x1750000 [ 0.403825] mc: mapped MMIO address: 0xffff8000113d0000 -> 0x1760000 [ 0.403835] mc: mapped MMIO address: 0xffff8000113f0000 -> 0x1770000 [ 0.403843] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.403866] mc-err: mcerr ops are set to t23x [ 0.404134] tegra234-cbb 13a00000.cbb-fabric: secure_irq = 21 [ 0.404195] tegra234-cbb c600000.aon-fabric: secure_irq = 22 [ 0.404234] tegra234-cbb d600000.bpmp-fabric: secure_irq = 23 [ 0.404273] tegra234-cbb de00000.dce-fabric: secure_irq = 24 [ 0.404315] tegra234-cbb be00000.rce-fabric: secure_irq = 25 [ 0.404355] tegra234-cbb b600000.sce-fabric: secure_irq = 26 [ 0.404587] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 91, base_baud = 0) is a SBSA [ 1.687030] printk: console [ttyAMA0] enabled [ 1.695397] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 1.702102] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 1.708801] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.715499] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.724015] ACPI: Interpreter disabled. [ 1.728916] vdd-av1v1-hub: supplied by vdd-5v-sys [ 1.733749] vbusA-cvb: supplied by vdd-5v-sys [ 1.738201] vbusB-cvb: supplied by vdd-5v-sys [ 1.742661] vdd-usbc1-vbus: supplied by vdd-5v-sys [ 1.747602] vdd-usbc2-vbus: supplied by vdd-5v-sys [ 1.752730] iommu: Default domain type: Translated [ 1.757645] eventlib_kernel: keventlib is initialized, test id: 0 [ 1.763897] SCSI subsystem initialized [ 1.767705] usbcore: registered new interface driver usbfs [ 1.773200] usbcore: registered new interface driver hub [ 1.778522] usbcore: registered new device driver usb [ 1.783759] mc: Linux media interface: v0.10 [ 1.788035] videodev: Linux video capture interface: v2.00 [ 1.793669] pps_core: LinuxPPS API ver. 1 registered [ 1.798632] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.807766] PTP clock support registered [ 1.811879] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 1.819040] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 1.826691] Registered efivars operations [ 1.831181] FPGA manager framework [ 1.834603] Advanced Linux Sound Architecture Driver Initialized. [ 1.840935] Bluetooth: Core ver 2.22 [ 1.844516] NET: Registered protocol family 31 [ 1.848958] Bluetooth: HCI device and connection manager initialized [ 1.855314] Bluetooth: HCI socket layer initialized [ 1.860191] Bluetooth: L2CAP socket layer initialized [ 1.865248] Bluetooth: SCO socket layer initialized [ 1.870595] camchar: rtcpu character device driver loaded [ 1.876220] clocksource: Switched to clocksource arch_sys_counter [ 2.030970] VFS: Disk quotas dquot_6.6.0 [ 2.034937] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.041944] pnp: PnP ACPI: disabled [ 2.047170] la/ptsa driver initialized. [ 2.051056] NET: Registered protocol family 2 [ 2.055607] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.065297] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 2.074038] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.082328] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 2.090156] TCP: Hash tables configured (established 262144 bind 65536) [ 2.096860] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.103790] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.111228] NET: Registered protocol family 1 [ 2.115830] RPC: Registered named UNIX socket transport module. [ 2.121764] RPC: Registered udp transport module. [ 2.126467] RPC: Registered tcp transport module. [ 2.131167] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.137616] PCI: CLS 0 bytes, default 64 [ 2.141632] Trying to unpack rootfs image as initramfs... [ 2.256120] Freeing initrd memory: 8196K [ 2.262252] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 2.270195] kvm [1]: IPA Size Limit: 48 bits [ 2.274624] kvm [1]: VHE mode initialized successfully [ 2.280422] Initialise system trusted keyrings [ 2.284933] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 2.293374] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.299440] NFS: Registering the id_resolver key type [ 2.304504] Key type id_resolver registered [ 2.308686] Key type id_legacy registered [ 2.312726] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.319433] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.326840] ntfs: driver 2.1.32 [Flags: R/W]. [ 2.342855] NET: Registered protocol family 38 [ 2.347303] Key type asymmetric registered [ 2.351400] Asymmetric key parser 'x509' registered [ 2.356291] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 2.363747] io scheduler mq-deadline registered [ 2.368277] io scheduler kyber registered [ 2.376132] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 2.381738] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 2.387325] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 2.392911] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 2.400954] tegra_dc_assign_hw_data: no matching compatible node [ 2.406972] tegradccommon module_init failed [ 2.411243] tegradc module_init failed [ 2.415240] EINJ: ACPI disabled. [ 2.419963] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 2.426843] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 2.432154] tegra-pmc: ### PMC reset level: L0 [ 2.436594] tegra-pmc: ### PMC reset status reg: 0x0 [ 2.442748] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.455949] random: fast init done [ 2.456128] printk: console [ttyTCU0] enabled [ 4.125381] arm-smmu 12000000.iommu: probing hardware configuration... [ 4.133389] arm-smmu 12000000.iommu: SMMUv2 with: [ 4.138237] arm-smmu 12000000.iommu: stage 1 translation [ 4.143799] arm-smmu 12000000.iommu: stage 2 translation [ 4.149348] arm-smmu 12000000.iommu: nested translation [ 4.154796] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 4.162215] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 only) [ 4.170921] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 4.177633] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.184328] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.191790] arm-smmu 10000000.iommu: probing hardware configuration... [ 4.198484] arm-smmu 10000000.iommu: SMMUv2 with: [ 4.203321] arm-smmu 10000000.iommu: stage 1 translation [ 4.208862] arm-smmu 10000000.iommu: stage 2 translation [ 4.214395] arm-smmu 10000000.iommu: nested translation [ 4.219862] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 4.227278] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 only) [ 4.235962] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 4.242658] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.249351] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.256468] arm-smmu 8000000.iommu: probing hardware configuration... [ 4.263081] arm-smmu 8000000.iommu: SMMUv2 with: [ 4.267820] arm-smmu 8000000.iommu: stage 1 translation [ 4.273263] arm-smmu 8000000.iommu: stage 2 translation [ 4.278705] arm-smmu 8000000.iommu: nested translation [ 4.284075] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 4.291415] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 4.299978] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 4.306600] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 4.313210] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 4.320471] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 4.330629] tegra_profiler: version: 1.147, samples/io: 49/28 [ 4.336595] tegra_profiler: auth: init [ 4.340706] nvsciipc: loaded module [ 4.345212] tegra23x-qspi 3270000.spi: Adding to iommu group 0 [ 4.351383] tegra23x-qspi 3270000.spi: Node prod has invalid entries [ 4.357907] tegra23x-qspi 3270000.spi: Node prod: Child has not proper setting [ 4.365317] tegra23x-qspi 3270000.spi: Node spi: Faild to read the Prod Setting. [ 4.372918] tegra23x-qspi 3270000.spi: Prod settings list not found [ 4.379421] tegra23x-qspi 3270000.spi: Failed to get reset control: -517 [ 4.386863] tun: Universal TUN/TAP device driver, 1.6 [ 4.392113] CAN device driver interface [ 4.396116] mttcan c310000.mttcan: Missing controller reset [ 4.401877] mttcan c310000.mttcan: probe failed [ 4.406640] mttcan c320000.mttcan: Missing controller reset [ 4.412425] mttcan c320000.mttcan: probe failed [ 4.417771] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 4.425188] hns3: Copyright (c) 2017 Huawei Corporation. [ 4.430679] e1000e: Intel(R) PRO/1000 Network Driver [ 4.435772] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.441875] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.447407] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.453312] PPP generic driver version 2.4.2 [ 4.457759] PPP BSD Compression module registered [ 4.462605] PPP Deflate Compression module registered [ 4.467804] PPP MPPE Compression module registered [ 4.472760] usbcore: registered new interface driver r8152 [ 4.478401] usbcore: registered new interface driver asix [ 4.483964] usbcore: registered new interface driver ax88179_178a [ 4.490229] usbcore: registered new interface driver cdc_ether [ 4.496228] usbcore: registered new interface driver net1080 [ 4.502040] usbcore: registered new interface driver cdc_subset [ 4.508116] usbcore: registered new interface driver zaurus [ 4.513845] usbcore: registered new interface driver cdc_ncm [ 4.519671] usbcore: registered new interface driver aqc111 [ 4.525564] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.531950] ohci-pci: OHCI PCI platform driver [ 4.536532] ohci-platform: OHCI generic platform driver [ 4.542201] tegra-xusb 3610000.xhci: Adding to iommu group 1 [ 4.548537] usbcore: registered new interface driver uas [ 4.554013] usbcore: registered new interface driver usb-storage [ 4.560335] tegra-xudc 3550000.xudc: Adding to iommu group 2 [ 4.566408] mousedev: PS/2 mouse device common for all mice [ 4.572157] usbcore: registered new interface driver xpad [ 4.579563] tegra_rtc c2a0000.rtc: registered as rtc1 [ 4.585025] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:19 UTC (19) [ 4.593255] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 4.599664] i2c /dev entries driver [ 4.603364] tegra-i2c 3160000.i2c: Adding to iommu group 3 [ 4.609159] tegra-i2c c240000.i2c: Adding to iommu group 3 [ 4.614867] tegra-i2c 3180000.i2c: Adding to iommu group 3 [ 4.620551] tegra-i2c 3190000.i2c: Adding to iommu group 3 [ 4.626217] tegra-i2c 31b0000.i2c: Adding to iommu group 3 [ 4.631891] tegra-i2c 31c0000.i2c: Adding to iommu group 3 [ 4.637581] tegra-i2c c250000.i2c: Adding to iommu group 3 [ 4.643274] tegra-i2c 31e0000.i2c: Adding to iommu group 3 [ 4.651751] mogo spi reg conf [ 4.654839] mogo spi reg conf success [ 4.659240] device-mapper: uevent: version 1.0.3 [ 4.664056] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 4.673871] sdhci: Secure Digital Host Controller Interface driver [ 4.680215] sdhci: Copyright(c) Pierre Ossman [ 4.684681] Synopsys Designware Multimedia Card Interface Driver [ 4.690910] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.697048] sdhci-tegra 3460000.sdhci: Adding to iommu group 4 [ 4.697355] sdhci-tegra 3400000.sdhci: Adding to iommu group 5 [ 4.697387] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 4.703462] tegra-bpmp bpmp: firmware: 888a114dda6bea50b6c6-eac380526d6 [ 4.724576] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 [ 4.730172] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x81 [ 4.741102] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0 [ 4.747023] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful ��debugfs initialized ��[ 5.977002] hid: raw HID events driver (C) Jiri Kosina [ 5.983058] usbcore: registered new interface driver usbhid [ 5.988808] usbhid: USB HID core driver [ 5.993807] tegra-dce d800000.dce: Adding to iommu group 6 [ 6.000665] dce: dce_ipc_channel_init:314 Invalid Channel State [0x0] for ch_type [2] [ 6.009455] tegra234-aon c000000.aon: Adding to iommu group 7 [ 6.015674] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 6.016954] c000000.aon:hsp: probed [ 6.024669] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [0]. Ignored... [ 6.037121] tegra234-aon c000000.aon: init done [ 6.037141] dce: dce_admin_send_cmd_ver:413 version : [0x2] err : [0x0] [ 6.042051] tegra23x-psc e860000.psc: Adding to iommu group 8 [ 6.049274] dce: dce_admin_setup_clients_ipc:542 Channel Reset Complete for Type [1] ... [ 6.049279] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [1]. Ignored... [ 6.049288] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [1]. Ignored... [ 6.055207] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____) [ 6.063050] dce: dce_admin_setup_clients_ipc:518 Get queue info failed for [2] [ 6.063658] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x2] [ 6.071879] tegra23x-psc e860000.psc: init done [ 6.080651] dce: dce_admin_setup_clients_ipc:542 Channel Reset Complete for Type [3] ... [ 6.080652] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [3]. Ignored... [ 6.080667] dce: dce_admin_ipc_handle_signal:89 Spurious signal on channel: [3]. Ignored... [ 6.087344] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 9 [ 6.095211] dce: dce_start_boot_flow:100 DCE_BOOT_DONE [ 6.104150] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 6.158680] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 6.167865] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 6.179489] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 6.190673] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 6.202382] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xf0 [ 6.214963] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-00 [ 6.227797] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 6.239743] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (143) [ 6.246579] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 6.254962] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=7a10e4613e151d2bf1df37dd80d456800f5b94d0 [ 6.268363] t19x_cache tegra-cache: probed [ 6.272765] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 6.286283] optee: probing for conduit method. [ 6.290872] optee: revision 3.16 (65cc2218) [ 6.290968] optee: dynamic shared memory is enabled [ 6.300394] optee: initialized driver [ 6.315937] nvpmodel: initialized successfully [ 6.320616] tegra_hv: get_hvd: not initialized yet [ 6.325562] user_ivc_mempool: hypervisor not present [ 6.331248] usbcore: registered new interface driver snd-usb-audio [ 6.338258] u32 classifier [ 6.341055] input device check on [ 6.344814] Actions configured [ 6.348423] Initializing XFRM netlink socket [ 6.353155] NET: Registered protocol family 10 [ 6.358983] Segment Routing with IPv6 [ 6.362801] NET: Registered protocol family 17 [ 6.367394] NET: Registered protocol family 15 [ 6.372017] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if yo. [ 6.385378] can: controller area network core [ 6.389921] NET: Registered protocol family 29 [ 6.394500] can: raw protocol [ 6.397565] can: broadcast manager protocol [ 6.401872] can: netlink gateway - max_hops=1 [ 6.406963] Bluetooth: RFCOMM socket layer initialized [ 6.412280] Bluetooth: RFCOMM ver 1.11 [ 6.416148] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 6.422246] Bluetooth: HIDP socket layer initialized [ 6.427782] 9pnet: Installing 9P2000 support [ 6.432245] Key type dns_resolver registered [ 6.437265] registered taskstats version 1 [ 6.441496] Loading compiled-in X.509 certificates [ 6.450248] Loaded X.509 cert 'Build time autogenerated kernel key: f24b60fa9ffc000a68258f58938f821ca6462614' [ 6.460722] tegra194-pcie 14100000.pcie: Adding to iommu group 10 [ 6.472596] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.479639] tegra194-pcie 14160000.pcie: Adding to iommu group 11 [ 6.490986] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.497797] tegra194-pcie 141a0000.pcie: Adding to iommu group 12 [ 6.509169] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 6.537428] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 13 [ 6.547743] host1x 13e40000.host1x: Adding to iommu group 14 [ 7.563457] t23x_init_gating_regs: Timed out waiting for syncpt ram init! [ 7.580302] host1x 13e40000.host1x: initialized [ 7.585290] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 15 [ 7.593392] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000) [ 7.605328] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 16 [ 7.613383] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000) [ 7.625345] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 17 [ 7.633388] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000) [ 7.645357] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 18 [ 7.653455] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 7.665427] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 19 [ 7.673483] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 7.685442] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 20 [ 7.693505] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 7.705456] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 21 [ 7.713511] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 7.725455] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 22 [ 7.733521] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 7.745465] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 23 [ 7.753534] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000) [ 7.765511] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 24 [ 7.773581] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000) [ 7.785532] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 25 [ 7.793598] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000) [ 7.805554] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 26 [ 7.813614] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000) [ 7.825559] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 27 [ 7.833603] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000) [ 7.845541] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 28 [ 7.853585] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000) [ 7.865510] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 29 [ 7.873595] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000) [ 7.885530] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 30 [ 7.893583] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000) [ 7.905565] falcon 15340000.vic: Adding to iommu group 31 [ 7.916116] falcon 15340000.vic: initialized [ 7.920763] falcon 15380000.nvjpg: Adding to iommu group 32 [ 7.929671] falcon 15380000.nvjpg: initialized [ 7.934378] falcon 15540000.nvjpg1: Adding to iommu group 33 [ 7.943351] falcon 15540000.nvjpg1: initialized [ 7.948150] falcon 154c0000.nvenc: Adding to iommu group 34 [ 7.958864] falcon 154c0000.nvenc: initialized [ 7.963573] falcon 15a50000.ofa: Adding to iommu group 35 [ 7.972678] falcon 15a50000.ofa: initialized [ 7.977205] nvdec 15480000.nvdec: Adding to iommu group 36 [ 7.988588] nvdec 15480000.nvdec: initialized [ 7.993189] tsec 15500000.tsec: Adding to iommu group 37 [ 8.003087] tsec 15500000.tsec: initialized [ 8.009702] gic 2a41000.agic-controller: GIC IRQ controller registered [ 8.025868] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 8.040046] gpio-396 (camera-control-output-low): hogged as output/low [ 8.046800] gpio-397 (camera-control-output-low): hogged as output/low [ 8.053560] gpio-487 (camera-control-output-low): hogged as output/low [ 8.060329] gpio-486 (camera-control-output-low): hogged as output/low [ 8.068035] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 8.075228] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 8.082202] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 8.088630] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 8.095029] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 8.101211] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 8.109322] misc tegra_camera_ctrl: tegra_camera_isomgr_register: some fields not in DT. [ 8.117662] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 8.126200] tegra194-isp5 14800000.isp: Adding to iommu group 38 [ 8.134935] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 8.144544] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 8.151088] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 8.160335] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 8.169581] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 8.178810] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 8.188052] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 8.197283] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 8.206514] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 8.215754] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound [ 8.225120] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 39 [ 8.233187] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 40 [ 8.241222] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 8.251134] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 8.257952] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 8.267894] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 8.274692] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 8.285056] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 8.291982] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: Adding to iommu group 41 [ 8.300680] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx0: initialized (streamid=18, iommu=smmu.0x0000000008000000) [ 8.312070] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: Adding to iommu group 42 [ 8.320755] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx1: initialized (streamid=19, iommu=smmu.0x0000000008000000) [ 8.332123] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: Adding to iommu group 43 [ 8.340808] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx2: initialized (streamid=20, iommu=smmu.0x0000000008000000) [ 8.352177] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: Adding to iommu group 44 [ 8.360875] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx3: initialized (streamid=21, iommu=smmu.0x0000000008000000) [ 8.372252] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: Adding to iommu group 45 [ 8.380951] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx4: initialized (streamid=22, iommu=smmu.0x0000000008000000) [ 8.392319] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: Adding to iommu group 46 [ 8.401044] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx5: initialized (streamid=23, iommu=smmu.0x0000000008000000) [ 8.412404] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: Adding to iommu group 47 [ 8.421105] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx6: initialized (streamid=24, iommu=smmu.0x0000000008000000) [ 8.432469] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: Adding to iommu group 48 [ 8.441172] pva_iommu_context_dev 16000000.pva0:pva0_niso1_ctx7: initialized (streamid=25, iommu=smmu.0x0000000008000000) [ 8.452554] pva 16000000.pva0: Adding to iommu group 49 [ 8.477552] pva 16000000.pva0: initialized [ 8.487851] nvdla 15880000.nvdla0: Adding to iommu group 50 [ 8.501484] nvdla 15880000.nvdla0: initialized [ 8.507601] nvdla 158c0000.nvdla1: Adding to iommu group 51 [ 8.521687] nvdla 158c0000.nvdla1: initialized [ 8.527805] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 3 [ 8.534710] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 8.542179] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 8.548828] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 8.555595] serial-tegra 3100000.serial: Adding to iommu group 3 [ 8.562251] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 13, base_baud = 0) is a TEGRA_UART [ 8.571911] serial-tegra 3130000.serial: Adding to iommu group 3 [ 8.578410] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 89, base_baud = 0) is a TEGRA_UART [ 8.588008] serial-tegra 3140000.serial: Adding to iommu group 3 [ 8.594487] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 90, base_baud = 0) is a TEGRA_UART [ 8.604107] tegra23x-qspi 3270000.spi: Node prod has invalid entries [ 8.610657] tegra23x-qspi 3270000.spi: Node prod: Child has not proper setting [ 8.618101] tegra23x-qspi 3270000.spi: Node spi: Faild to read the Prod Setting. [ 8.625725] tegra23x-qspi 3270000.spi: Prod settings list not found [ 8.640316] Message RAM Configuration [ 8.640316] | base addr |0x0c312000| [ 8.640316] | sidfc_flssa |0x00000000| [ 8.640316] | xidfc_flesa |0x00000040| [ 8.640316] | rxf0c_f0sa |0x000000c0| [ 8.640316] | rxf1c_f1sa |0x000009c0| [ 8.640316] | rxbc_rbsa |0x000009c0| [ 8.640316] | txefc_efsa |0x000009c0| [ 8.640316] | txbc_tbsa |0x00000a40| [ 8.640316] | tmc_tmsa |0x00000ec0| [ 8.640316] | mram size |0x00001000| [ 8.685009] Release 3.2.3 from 09.06.2018 [ 8.689627] net can0: mttcan device registered (regs=(____ptrval____), irq=140) [ 8.699653] Message RAM Configuration [ 8.699653] | base addr |0x0c322000| [ 8.699653] | sidfc_flssa |0x00000000| [ 8.699653] | xidfc_flesa |0x00000040| [ 8.699653] | rxf0c_f0sa |0x000000c0| [ 8.699653] | rxf1c_f1sa |0x000009c0| [ 8.699653] | rxbc_rbsa |0x000009c0| [ 8.699653] | txefc_efsa |0x000009c0| [ 8.699653] | txbc_tbsa |0x00000a40| [ 8.699653] | tmc_tmsa |0x00000ec0| [ 8.699653] | mram size |0x00001000| [ 8.744338] Release 3.2.3 from 09.06.2018 [ 8.748621] net can1: mttcan device registered (regs=(____ptrval____), irq=141) [ 8.774296] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 8.784068] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.789649] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 8.798281] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 8.807907] tegra-xusb 3610000.xhci: irq 261, io mem 0x03610000 [ 8.814337] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 8.822850] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.830289] usb usb1: Product: xHCI Host Controller [ 8.835312] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 8.841589] usb usb1: SerialNumber: 3610000.xhci [ 8.846965] hub 1-0:1.0: USB hub found [ 8.850855] hub 1-0:1.0: 4 ports detected [ 8.855201] tegra-xusb 3610000.xhci: xHCI Host Controller [ 8.860764] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 8.868563] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 8.876083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 8.884595] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.892039] usb usb2: Product: xHCI Host Controller [ 8.897060] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 8.903336] usb usb2: SerialNumber: 3610000.xhci [ 8.908529] hub 2-0:1.0: USB hub found [ 8.912414] hub 2-0:1.0: 4 ports detected [ 8.918178] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 8.930248] max96712 2-0029: [MAX96712]: probing GMSL Deserializer [ 8.965100] max96712 2-0029: max96712_probe: success [ 8.970436] max96712 2-006b: [MAX96712]: probing GMSL Deserializer [ 9.005186] max96712 2-006b: max96712_probe: success [ 9.116461] max9295a 2-0040: max9295a_sensing_config: pen gmsl link0, change 9295a address from 0x80 to 0x82 [ 9.232851] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2be = 10 [ 9.240551] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x318 = 5e [ 9.249276] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d6 = 0 [ 10.273559] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d6 = 10 [ 10.281346] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x0 = 82 [ 10.288458] max9295a 2-0040: max9295a_sensing_config: pen gmsl link0, change 9295a address from 0x80 to 0x84 [ 10.405657] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2be = 10 [ 10.413456] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x318 = 5e [ 10.421098] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d3 = 0 [ 11.429349] tegra-xusb 3610000.xhci: entering ELPG done [ 11.456907] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d3 = 10 [ 11.464598] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x0 = 84 [ 11.471711] max9295a 2-0040: max9295a_sensing_config: pen gmsl link0, change 9295a address from 0x80 to 0x86 [ 11.589324] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2be = 10 [ 11.597705] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x318 = 5e [ 11.605904] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d6 = 0 [ 12.641829] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d6 = 10 [ 12.650207] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x0 = 86 [ 12.657343] max9295a 2-0040: max9295a_sensing_config: pen gmsl link0, change 9295a address from 0x80 to 0x88 [ 12.773664] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2be = 10 [ 12.782046] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x318 = 5e [ 12.790431] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d3 = 0 [ 13.825408] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d3 = 10 [ 13.833161] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x0 = 88 [ 13.840513] max9295a 2-0040: max9295a_sensing_config: pen gmsl link0, change 9295a address from 0x80 to 0x62 [ 14.881117] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2be = 10 [ 14.888850] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x318 = 5e [ 14.896507] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d3 = 0 [ 15.937116] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d3 = 10 [ 15.944829] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x0 = 62 [ 15.951944] max9295a 2-0040: max9295a_sensing_config: pen gmsl link0, change 9295a address from 0x80 to 0x64 [ 16.992607] random: crng init done [ 16.996940] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2be = 10 [ 17.005368] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x318 = 5e [ 17.013729] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d3 = 0 [ 18.049114] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d3 = 10 [ 18.056930] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x0 = 64 [ 18.064047] max9295a 2-0040: max9295a_sensing_config: pen gmsl link0, change 9295a address from 0x80 to 0x66 [ 19.105124] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2be = 10 [ 19.112829] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x318 = 5e [ 19.120492] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d3 = 0 [ 20.161133] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d3 = 10 [ 20.168833] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x0 = 66 [ 20.175935] max9295a 2-0040: max9295a_sensing_config: pen gmsl link0, change 9295a address from 0x80 to 0x68 [ 21.217495] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2be = 10 [ 21.225253] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x318 = 5e [ 21.232907] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d3 = 0 [ 22.274012] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x2d3 = 10 [ 22.281786] max9295a 2-0040: max9295_write_reg:i2c write failed, 0x0 = 68 [ 22.288901] max9295a 2-0040: max9295a_sensing_config: continue to config 96712 [ 23.533463] max9295a 2-0040: --------------- max9295a_sensing_config over --------------- [ 23.542180] max9295a 2-0040: max9295a_probe: success [ 23.547543] max9295a 2-0042: max9295a_probe: success [ 23.552880] max9295a 2-0043: max9295a_probe: success [ 23.558172] max9295a 2-0044: max9295a_probe: success [ 23.563461] max9295a 2-0045: max9295a_probe: success [ 23.568822] mogo_imx390 2-001b: probing v4l2 sensor. [ 23.573939] mogo_imx390 2-001b: 8M driver called [ 23.578939] mogo_imx390 2-001b: tegracam sensor driver:imx390_v2.0.6 [ 23.585545] mogo_imx390 2-001b: priv->g_ctx.ser_reg = 0x42 -----mogo----- [ 23.593180] mogo_imx390 2-001b: str_value = a, priv->g_ctx.serdes_csi_link = 1 [ 23.736644] tegra-camrtc-capture-vi tegra-capture-vi: subdev mogo_imx390 2-001b bound [ 23.752389] mogo_imx390 2-001b: Detected IMX390 sensor [ 23.757864] mogo_imx390 2-001c: probing v4l2 sensor. [ 23.762982] mogo_imx390 2-001c: 8M driver called [ 23.767910] debugfs: Directory 'imx390_a' with parent '/' already present! [ 23.775006] mogo_imx390 2-001c: tegracam sensor driver:imx390_v2.0.6 [ 23.781573] mogo_imx390 2-001c: priv->g_ctx.ser_reg = 0x43 -----mogo----- [ 23.789214] mogo_imx390 2-001c: str_value = b, priv->g_ctx.serdes_csi_link = 2 [ 23.904569] tegra-camrtc-capture-vi tegra-capture-vi: subdev mogo_imx390 2-001c bound [ 23.914837] mogo_imx390 2-001c: Detected IMX390 sensor [ 23.920346] mogo_imx390 2-001d: probing v4l2 sensor. [ 23.925471] mogo_imx390 2-001d: 2M driver called [ 23.930406] mogo_imx390 2-001d: tegracam sensor driver:imx390_v2.0.6 [ 23.936973] mogo_imx390 2-001d: priv->g_ctx.ser_reg = 0x44 -----mogo----- [ 23.944616] mogo_imx390 2-001d: str_value = c, priv->g_ctx.serdes_csi_link = 3 [ 24.060558] tegra-camrtc-capture-vi tegra-capture-vi: subdev mogo_imx390 2-001d bound [ 24.070430] mogo_imx390 2-001d: Detected IMX390 sensor [ 24.075943] mogo_imx390 2-001e: probing v4l2 sensor. [ 24.081072] mogo_imx390 2-001e: 2M driver called [ 24.086025] debugfs: Directory 'imx390_c' with parent '/' already present! [ 24.093117] mogo_imx390 2-001e: tegracam sensor driver:imx390_v2.0.6 [ 24.099699] mogo_imx390 2-001e: priv->g_ctx.ser_reg = 0x45 -----mogo----- [ 24.107335] mogo_imx390 2-001e: str_value = d, priv->g_ctx.serdes_csi_link = 4 [ 24.220548] tegra-camrtc-capture-vi tegra-capture-vi: subdev mogo_imx390 2-001e bound [ 24.229742] mogo_imx390 2-001e: Detected IMX390 sensor [ 24.235191] mogo_imx390 2-002b: probing v4l2 sensor. [ 24.240305] mogo_imx390 2-002b: 2M driver called [ 24.245234] mogo_imx390 2-002b: tegracam sensor driver:imx390_v2.0.6 [ 24.251797] mogo_imx390 2-002b: priv->g_ctx.ser_reg = 0x32 -----mogo----- [ 24.259435] mogo_imx390 2-002b: ser_i2c == NULL -----mogo----- [ 24.266065] mogo_imx390 2-002b: board setup failed [ 24.271069] mogo_imx390 2-002b: board setup failed [ 24.276152] mogo_imx390 2-002c: probing v4l2 sensor. [ 24.281267] mogo_imx390 2-002c: 2M driver called [ 24.286201] mogo_imx390 2-002c: tegracam sensor driver:imx390_v2.0.6 [ 24.292764] mogo_imx390 2-002c: priv->g_ctx.ser_reg = 0x33 -----mogo----- [ 24.300384] mogo_imx390 2-002c: ser_i2c == NULL -----mogo----- [ 24.307014] mogo_imx390 2-002c: board setup failed [ 24.311964] mogo_imx390 2-002c: board setup failed [ 24.317033] mogo_imx390 2-002d: probing v4l2 sensor. [ 24.322146] mogo_imx390 2-002d: 2M driver called [ 24.327051] mogo_imx390 2-002d: tegracam sensor driver:imx390_v2.0.6 [ 24.333615] mogo_imx390 2-002d: priv->g_ctx.ser_reg = 0x34 -----mogo----- [ 24.341233] mogo_imx390 2-002d: ser_i2c == NULL -----mogo----- [ 24.347879] mogo_imx390 2-002d: board setup failed [ 24.352838] mogo_imx390 2-002d: board setup failed [ 24.357906] mogo_imx390 2-002e: probing v4l2 sensor. [ 24.363020] mogo_imx390 2-002e: 2M driver called [ 24.367938] mogo_imx390 2-002e: tegracam sensor driver:imx390_v2.0.6 [ 24.374497] mogo_imx390 2-002e: priv->g_ctx.ser_reg = 0x35 -----mogo----- [ 24.382122] mogo_imx390 2-002e: ser_i2c == NULL -----mogo----- [ 24.388767] mogo_imx390 2-002e: board setup failed [ 24.393720] mogo_imx390 2-002e: board setup failed [ 24.398799] max9295a 2-0032: max9295a_probe: success [ 24.404102] max9295a 2-0033: max9295a_probe: success [ 24.409398] max9295a 2-0034: max9295a_probe: success [ 24.414710] max9295a 2-0035: max9295a_probe: success [ 24.428940] max96752 8-002a: [MAX96752]: probing GMSL Deserializer [ 24.429114] max96781 8-0040: [MAX96781]: probing GMSL Deserializer [ 24.442181] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 2033000 KHz, changing to: 2035200 KHz [ 24.456269] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 2011000 KHz, changing to: 2035200 KHz [ 24.470315] cpufreq: cpufreq_online: CPU8: Running at unlisted initial frequency: 2003000 KHz, changing to: 2035200 KHz [ 24.482681] tegra194-cpufreq e000000.ccplex: probed with ICC [ 24.489685] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 24.498564] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 24.505743] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 24.510313] mmc0: CQHCI version 5.10 [ 24.514440] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 24.526835] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 24.535863] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 24.550142] irq: IRQ328: trimming hierarchy from :interrupt-controller@f400000-1 [ 24.551072] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 24.557806] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 328 [ 24.654787] mmc0: Command Queue Engine enabled [ 24.659364] mmc0: periodic cache flush enabled [ 24.663951] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 24.670964] mmcblk0: mmc0:0001 G1M15M 59.3 GiB [ 24.675832] mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (511:0) [ 24.693560] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 25.644803] tegra194-pcie 14100000.pcie: Phy link never came up [ 25.650973] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 25.657785] pci_bus 0001:00: root bus resource [bus 00-ff] [ 25.663431] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x30100000-0x301fffff]) [ 25.673278] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff]) [ 25.684120] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 25.692059] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 25.698403] pci 0001:00:00.0: PME# supported from D0 D3hot [ 25.711689] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 25.717089] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 25.726038] pcieport 0001:00:00.0: Adding to iommu group 10 [ 25.731985] pcieport 0001:00:00.0: PME: Signaling with IRQ 51 [ 25.738270] pcieport 0001:00:00.0: AER: enabled with IRQ 51 [ 25.744252] pci_bus 0001:01: busn_res: [bus 01-ff] is released [ 25.750331] pci 0001:00:00.0: Removing from iommu group 10 [ 25.755980] pci_bus 0001:00: busn_res: [bus 00-ff] is released [ 25.763751] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 25.771307] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 25.778493] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 25.787195] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 25.795884] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 26.913794] tegra194-pcie 14160000.pcie: Phy link never came up [ 26.919949] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 26.926760] pci_bus 0004:00: root bus resource [bus 00-ff] [ 26.932404] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x36100000-0x361fffff]) [ 26.942520] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff]) [ 26.953350] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 26.961277] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 26.967612] pci 0004:00:00.0: PME# supported from D0 D3hot [ 26.980595] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 26.985996] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 26.994910] pcieport 0004:00:00.0: Adding to iommu group 11 [ 27.000838] pcieport 0004:00:00.0: PME: Signaling with IRQ 53 [ 27.007126] pcieport 0004:00:00.0: AER: enabled with IRQ 53 [ 27.013099] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 27.019188] pci 0004:00:00.0: Removing from iommu group 11 [ 27.024840] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 27.032431] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 27.039119] vdd-3v3-pcie: supplied by vdd-3v3-sys [ 27.044152] avdd-cam-2v8: supplied by vdd-3v3-sys [ 27.049087] vdd-dp: supplied by vdd-3v3-sys [ 27.053536] vdd-3v3-sd: supplied by vdd-3v3-sys [ 27.058495] dsi-vdd-1v8-bl-en: supplied by vdd-1v8-sys [ 27.066331] tegra194-isp5 14800000.isp: initialized [ 27.075665] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 27.082104] (NULL device *): fops function table already registered [ 27.089495] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 27.096035] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 27.102401] mogo_imx390 2-002b: probing v4l2 sensor. [ 27.107514] mogo_imx390 2-002b: 2M driver called [ 27.112420] mogo_imx390 2-002b: tegracam sensor driver:imx390_v2.0.6 [ 27.118961] mogo_imx390 2-002b: priv->g_ctx.ser_reg = 0x32 -----mogo----- [ 27.126594] mogo_imx390 2-002b: str_value = a, priv->g_ctx.serdes_csi_link = 1 [ 27.268392] tegra-camrtc-capture-vi tegra-capture-vi: subdev mogo_imx390 2-002b bound [ 27.277102] mogo_imx390 2-002b: Detected IMX390 sensor [ 27.282455] mogo_imx390 2-002c: probing v4l2 sensor. [ 27.287567] mogo_imx390 2-002c: 2M driver called [ 27.292451] debugfs: Directory 'imx390_e' with parent '/' already present! [ 27.299540] mogo_imx390 2-002c: tegracam sensor driver:imx390_v2.0.6 [ 27.306076] mogo_imx390 2-002c: priv->g_ctx.ser_reg = 0x33 -----mogo----- [ 27.313702] mogo_imx390 2-002c: str_value = b, priv->g_ctx.serdes_csi_link = 2 [ 27.428389] tegra-camrtc-capture-vi tegra-capture-vi: subdev mogo_imx390 2-002c bound [ 27.437611] mogo_imx390 2-002c: Detected IMX390 sensor [ 27.442959] mogo_imx390 2-002d: probing v4l2 sensor. [ 27.448070] mogo_imx390 2-002d: 2M driver called [ 27.452965] mogo_imx390 2-002d: tegracam sensor driver:imx390_v2.0.6 [ 27.459511] mogo_imx390 2-002d: priv->g_ctx.ser_reg = 0x34 -----mogo----- [ 27.467140] mogo_imx390 2-002d: str_value = c, priv->g_ctx.serdes_csi_link = 3 [ 27.580390] tegra-camrtc-capture-vi tegra-capture-vi: subdev mogo_imx390 2-002d bound [ 27.589587] mogo_imx390 2-002d: Detected IMX390 sensor [ 27.594946] mogo_imx390 2-002e: probing v4l2 sensor. [ 27.600057] mogo_imx390 2-002e: 2M driver called [ 27.604946] debugfs: Directory 'imx390_g' with parent '/' already present! [ 27.612035] mogo_imx390 2-002e: tegracam sensor driver:imx390_v2.0.6 [ 27.618591] mogo_imx390 2-002e: priv->g_ctx.ser_reg = 0x35 -----mogo----- [ 27.626232] mogo_imx390 2-002e: str_value = d, priv->g_ctx.serdes_csi_link = 4 [ 27.740383] tegra-camrtc-capture-vi tegra-capture-vi: subdev mogo_imx390 2-002e bound [ 27.749035] mogo_imx390 2-002e: Detected IMX390 sensor [ 27.754983] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 27.755058] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 27.776223] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 328 [ 27.877389] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 27.884586] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 27.893284] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 27.901975] tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000 [ 28.016361] tegra194-pcie 141a0000.pcie: Link up [ 28.022800] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 28.029618] pci_bus 0005:00: root bus resource [bus 00-ff] [ 28.035265] pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3a100000-0x3a1fffff]) [ 28.045382] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff] (bus address [0x40000000-0x47ffffff]) [ 28.056225] pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref] [ 28.064143] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 28.070457] pci 0005:00:00.0: PME# supported from D0 D3hot [ 28.080266] pci 0005:01:00.0: [144d:a809] type 00 class 0x010802 [ 28.086617] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 28.098844] pci 0005:00:00.0: BAR 14: assigned [mem 0x2b28000000-0x2b280fffff] [ 28.106290] pci 0005:01:00.0: BAR 0: assigned [mem 0x2b28000000-0x2b28003fff 64bit] [ 28.114254] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 28.119631] pci 0005:00:00.0: bridge window [mem 0x2b28000000-0x2b280fffff] [ 28.126993] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 28.135739] pci 0005:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 28.144666] pcieport 0005:00:00.0: Adding to iommu group 12 [ 28.150606] pcieport 0005:00:00.0: PME: Signaling with IRQ 55 [ 28.156907] pcieport 0005:00:00.0: AER: enabled with IRQ 55 [ 28.162933] nvme 0005:01:00.0: Adding to iommu group 12 [ 28.168711] nvme nvme0: pci function 0005:01:00.0 [ 28.173769] nvme 0005:01:00.0: enabling device (0000 -> 0002) [ 28.174068] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 28.186288] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 28.187865] nvme nvme0: Shutdown timeout set to 8 seconds [ 28.193130] nvethernet 6810000.ethernet: Adding to iommu group 52 [ 28.204782] nvethernet 6810000.ethernet: failed to read skip mac reset flag, default 0 [ 28.212973] nvethernet 6810000.ethernet: failed to read MDIO address [ 28.216008] nvme nvme0: allocated 64 MiB host memory buffer. [ 28.219557] nvethernet 6810000.ethernet: setting to default DMA bit mask [ 28.233129] nvethernet 6810000.ethernet: failed to get phy reset gpio error: -2 [ 28.245494] nvethernet 6810000.ethernet: Ethernet MAC address: 48:b0:2d:82:b8:30 [ 28.253614] nvethernet 6810000.ethernet: Macsec not enabled [ 28.259355] nvethernet 6810000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 28.270972] nvethernet 6810000.ethernet: eth0 (HW ver: 31) created with 10 DMA channels [ 28.279338] nvethernet 6910000.ethernet: Adding to iommu group 53 [ 28.286111] nvethernet 6910000.ethernet: failed to read skip mac reset flag, default 0 [ 28.286112] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 28.300564] nvethernet 6910000.ethernet: failed to read MDIO address [ 28.307110] nvethernet 6910000.ethernet: setting to default DMA bit mask [ 28.311940] nvme nvme0: 12/0/0 default/read/poll queues [ 28.314787] nvethernet 6910000.ethernet: failed to get phy reset gpio error: -2 [ 28.331667] nvme0n1: p1 [ 28.332059] nvethernet 6910000.ethernet: Ethernet MAC address: 48:b0:2d:82:b8:31 [ 28.342227] nvethernet 6910000.ethernet: Macsec not enabled [ 28.347975] nvethernet 6910000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 28.357480] nvethernet 6910000.ethernet: eth1 (HW ver: 31) created with 10 DMA channels [ 28.365847] nvethernet 6a10000.ethernet: Adding to iommu group 54 [ 28.372527] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 28.372617] nvethernet 6a10000.ethernet: failed to read skip mac reset flag, default 0 [ 28.386990] nvethernet 6a10000.ethernet: failed to read MDIO address [ 28.393549] nvethernet 6a10000.ethernet: setting to default DMA bit mask [ 28.401186] nvethernet 6a10000.ethernet: failed to get phy reset gpio error: -2 [ 28.413675] nvethernet 6a10000.ethernet: Ethernet MAC address: 48:b0:2d:82:b8:32 [ 28.421585] nvethernet 6a10000.ethernet: Macsec not enabled [ 28.427330] nvethernet 6a10000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 28.436872] nvethernet 6a10000.ethernet: eth2 (HW ver: 31) created with 10 DMA channels [ 28.445221] nvethernet 6b10000.ethernet: Adding to iommu group 55 [ 28.451771] nvethernet 6b10000.ethernet: failed to read skip mac reset flag, default 0 [ 28.451990] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 28.459938] nvethernet 6b10000.ethernet: failed to read MDIO address [ 28.459944] nvethernet 6b10000.ethernet: setting to default DMA bit mask [ 28.480235] nvethernet 6b10000.ethernet: failed to get phy reset gpio error: -2 [ 28.491974] nvethernet 6b10000.ethernet: Ethernet MAC address: 48:b0:2d:82:b8:33 [ 28.499879] nvethernet 6b10000.ethernet: Macsec not enabled [ 28.505616] nvethernet 6b10000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 28.515142] nvethernet 6b10000.ethernet: eth3 (HW ver: 31) created with 10 DMA channels [ 28.523668] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 28.530508] irq: IRQ343: trimming hierarchy from :pmc@c360000 [ 28.536484] irq: IRQ344: trimming hierarchy from :interrupt-controller@f400000-1 [ 28.544167] irq: IRQ345: trimming hierarchy from :pmc@c360000 [ 28.550124] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 28.557438] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 28.564086] tegra-se-nvhost 15810000.se: Adding to iommu group 56 [ 28.570822] tegra-se-nvhost 15810000.se: initialized [ 28.586875] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 28.593372] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 28.596282] tegra-se-nvhost 15820000.se: Adding to iommu group 57 [ 28.606330] tegra-se-nvhost 15820000.se: initialized [ 28.613162] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 28.619692] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 28.620288] tegra-se-nvhost 15840000.se: Adding to iommu group 58 [ 28.632629] tegra-se-nvhost 15840000.se: initialized [ 28.638944] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 28.645474] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 28.648775] tegra_actmon d230000.actmon: in actmon_register()... [ 28.658255] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 28.664889] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 28.673352] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 28.679809] hvc_sysfs: hypervisor is not present ��WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpusysclk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc1clk WARNING: clock_disable: clk_power_ungate on gated domain 35 for gpc0clk ��[ 28.816424] ALSA device list: [ 28.819480] No soundcards found. [ 28.823551] Freeing unused kernel memory: 3968K [ 28.828293] Run /init as init process [ 28.831625] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 28.851683] Root device found: PARTUUID=303de5be-8188-45f1-83a2-76a45488e562 [ 29.311805] EXT4-fs (mmcblk0p1): 5 orphan inodes deleted [ 29.317289] EXT4-fs (mmcblk0p1): recovery complete [ 29.333034] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 29.344033] Rootfs mounted over PARTUUID=303de5be-8188-45f1-83a2-76a45488e562 [ 29.371374] Switching from initrd to actual rootfs [ 29.480972] systemd[1]: System time before build time, advancing clock. [ 29.537259] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTM) [ 29.560956] systemd[1]: Detected architecture arm64. [ 29.600857] systemd[1]: Set hostname to . [ 29.761272] systemd[1]: /lib/systemd/system/node_exporter.service:3: Invalid URL, ignoring: node_exporter [ 29.771136] systemd[1]: /lib/systemd/system/node_exporter.service:3: Invalid URL, ignoring: Monitoring [ 29.780779] systemd[1]: /lib/systemd/system/node_exporter.service:3: Invalid URL, ignoring: System [ 29.845210] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 29.855043] systemd[1]: Reached target Slices. [ 29.859727] systemd[1]: Reached target Swap. [ 29.864425] systemd[1]: Listening on RPCbind Server Activation Socket. [ 29.871296] systemd[1]: Listening on fsck to fsckd communication Socket. [ 29.878307] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 29.885259] systemd[1]: Listening on Journal Audit Socket. [ 29.891035] systemd[1]: Listening on Journal Socket (/dev/log). [ 29.897278] systemd[1]: Listening on Journal Socket. [ 29.902547] systemd[1]: Listening on udev Control Socket. [ 29.908220] systemd[1]: Listening on udev Kernel Socket. [ 29.913926] systemd[1]: dev-hugepages.mount: unit configures an IP firewall, but the local system does not support BPF/cgroup firewa. [ 29.926727] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 29.936837] systemd[1]: Mounting Huge Pages File System... [ 29.943628] systemd[1]: Mounting POSIX Message Queue File System... [ 29.951100] systemd[1]: Mounting Kernel Debug File System... [ 29.958040] systemd[1]: Mounting Kernel Trace File System... [ 29.965177] systemd[1]: Starting Journal Service... [ 29.971281] systemd[1]: Starting Set the console keyboard layout... [ 29.978836] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 29.988720] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 29.997496] systemd[1]: Started Nameserver information manager. [ 30.003971] systemd[1]: Reached target Network (Pre). [ 30.010583] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 30.019968] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 30.022052] systemd[1]: Starting Load Kernel Modules... [ 30.035681] irq: IRQ346: trimming hierarchy from :pmc@c360000 [ 30.036500] systemd[1]: Starting Remount Root and Kernel File Systems... [ 30.043360] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 30.054106] pps pps0: new PPS source pps-gpio.-1 [ 30.058892] pps pps0: Registered IRQ 346 as PPS source [ 30.064506] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 30.065566] systemd[1]: Starting udev Coldplug all Devices... [ 30.078177] systemd[1]: Started Journal Service. [ 30.116027] systemd-journald[324]: Received client request to flush runtime journal. [ 30.147621] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 30.154465] tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x000000082f000000,16777216 [ 30.164080] tegra-carveouts tegra-carveouts: assigned reserved memory node fsi-carveout [ 30.172341] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x0000000849800000,914358272 [ 30.182012] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 30.182021] nvmap_page_pool_init: Total RAM pages: 7817268 [ 30.182024] nvmap_page_pool_init: nvmap page pool size: 977158 pages (3817 MB) [ 30.203448] nvmap_background_zero_thread: PP zeroing thread starting. [ 30.203528] misc nvmap: created heap vpr base 0x0000000849800000 size (892928KiB) [ 30.220978] misc nvmap: created heap fsi base 0x000000082f000000 size (16384KiB) [ 30.228993] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.537064] nvidia: loading out-of-tree module taints kernel. [ 31.544400] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 31.558077] nv_platform 13800000.display: Adding to iommu group 59 [ 31.574249] platform 13800000.display:nvdisplay-niso: Adding to iommu group 60 [ 31.574640] spi-tegra114 3210000.spi: Adding to iommu group 3 [ 31.583583] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.589920] NVRM: loading NVIDIA UNIX Open Kernel Module for aarch64 35.1.0 Release Build (buildbrain@mobile-u64-5273-d7000) Wed2 [ 31.593918] spi-tegra114 c260000.spi: Adding to iommu group 3 [ 31.596068] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.596549] spi-tegra114 3230000.spi: Adding to iommu group 3 [ 31.613329] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 16 channels [ 31.635712] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.642894] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.664754] cpu-throttle-alert cooling device registered. [ 31.671007] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.676757] gpu-throttle-alert cooling device registered. [ 31.683443] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.683730] cv0-throttle-alert cooling device registered. [ 31.695770] cv1-throttle-alert cooling device registered. [ 31.701514] cv2-throttle-alert cooling device registered. [ 31.707333] soc0-throttle-alert cooling device registered. [ 31.713204] soc1-throttle-alert cooling device registered. [ 31.713447] irq: IRQ347: trimming hierarchy from :pmc@c360000 [ 31.719577] soc2-throttle-alert cooling device registered. [ 31.724818] nct1008_nct72 4-004c: starting parse dt [ 31.725055] nct1008_nct72 4-004c: !!!Found deprecated property!!! [ 31.730689] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.732062] hot-surface-alert cooling device registered. [ 31.735658] nct1008_nct72 4-004c: success parsing dt [ 31.742261] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.748409] nct1008_nct72 4-004c: success in enabling tmp451 VDD rail [ 31.777065] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.807938] nct1008_nct72 4-004c: LOC shutdown limit 107 [ 31.814215] nct1008_nct72 4-004c: EXT shutdown limit 107 [ 31.831583] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.838187] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.841298] nvadsp 2993000.adsp: Adding to iommu group 61 [ 31.850216] nvadsp 2993000.adsp: in probe()... [ 31.855420] nvadsp 2993000.adsp: nvadsp_app_module_probe [ 31.856750] nct1008_nct72 4-004c: initial LOC temp: 52000 [ 31.867382] nct1008_nct72 4-004c: initial EXT temp: 59000 [ 31.867939] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.874088] nct1008_nct72 4-004c: hi_b:-4, lo_b:0 [ 31.886369] nct1008_nct72 4-004c: nct1008_probe: initialized [ 31.894431] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.984086] tegra-hda 3510000.hda: Adding to iommu group 62 [ 31.996971] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 31.998341] qspi_mtd spi6.0: MX25U51279G (65536 Kbytes) [ 32.008982] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x4000000 (64MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 32.028399] tegra-asoc: sound: Adding to iommu group 61 [ 32.067726] tegra210-adsp aconnect@2a41000:adsp_audio: Adding to iommu group 61 [ 32.075619] tegra210_adsp_audio_probe: platform probe started [ 32.082115] tegra210-adsp tegra210-adsp: Default param-type to BYTE for mp3-dec1 [ 32.090279] tegra210-adsp tegra210-adsp: Default param-type to BYTE for spkprot [ 32.098474] tegra210-adsp tegra210-adsp: Default param-type to BYTE for src [ 32.106329] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aac-dec1 [ 32.114773] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aec [ 32.115033] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 32.122445] tegra210-adsp tegra210-adsp: Default param-type to BYTE for wire [ 32.129087] 1 fixed-partitions partitions found on MTD device spi6.0 [ 32.136221] tegra210-adsp tegra210-adsp: adma channel page address dt entry not found [ 32.136818] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 32.142295] Creating 1 MTD partitions on "spi6.0": [ 32.142298] 0x000000000000-0x000004000000 : "Whole_flash0" [ 32.168270] tegra210-adsp tegra210-adsp: using adma channel page 0 [ 32.174972] nvadsp 2993000.adsp: ADSP OS firmware already loaded [ 32.175688] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 32.180100] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=3 as /devices/platform/3510000.hda/sound/card0/input1 [ 32.180169] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=7 as /devices/platform/3510000.hda/sound/card0/input2 [ 32.180231] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=8 as /devices/platform/3510000.hda/sound/card0/input3 [ 32.180278] input: NVIDIA Jetson AGX Orin HDA HDMI/DP,pcm=9 as /devices/platform/3510000.hda/sound/card0/input4 [ 32.230005] cryptd: max_cpu_qlen set to 1000 [ 32.237296] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 32.252457] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 32.261903] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 32.270205] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 32.279794] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 32.423425] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 32.512299] tegra210-adsp tegra210-adsp: Loaded app wire [ 32.517787] tegra210-adsp tegra210-adsp: Loaded app apm [ 32.523176] tegra210-adsp tegra210-adsp: Loaded app adma [ 32.528665] tegra210-adsp tegra210-adsp: Loaded app adma_tx [ 32.534414] nvadsp_set_adma_dump_reg: callback for adma reg dump is sent to 00000000764eaaa5 [ 32.568144] tegra210-adsp tegra210-adsp: Tegra210 ADSP driver successfully registered [ 32.576803] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 33.637360] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 4000000 0 [ 33.637360] [ 33.685787] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 33.955458] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 33.975143] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517 [ 34.629278] tegra-xudc 3550000.xudc: failed to get usbphy-0: -517