U-Boot SPL 2014.10-rc2 (Nov 23 2017 - 16:49:39) [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.40 (root@tim-pcpartner) (gcc version 4.9.0 (crosstool-NG hg+default-069f43a215cc) ) #1 SMP PREEMPT Thu Nov 27 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: jetson-tk1, model: NVIDIA Tegra124 PM375, serial: 0 [ 0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space [ 0.000000] Found tsec, start=0xf4900000 size=2000000 [ 0.000000] Tegra reserved memory: [ 0.000000] LP0: f46ff000 - f46ff80f [ 0.000000] Bootloader framebuffer: 00000000 - 00000000 [ 0.000000] Bootloader framebuffer2: 00000000 - 00000000 [ 0.000000] Framebuffer: f8500000 - f96fffff [ 0.000000] 2nd Framebuffer: f9700000 - fdefffff [ 0.000000] Carveout: 00000000 - 00000000 [ 0.000000] Vpr: 00000000 - 00000000 [ 0.000000] Tsec: f4900000 - f68fffff [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] DTS File Name: /home/tim/pcpartner/temp/tk1_r21-4/kernel/arch/arm/boot/dts/tegra124-jetson_tk1-pm375-000-c00-00.dts [ 0.000000] Tegra12: CPU Speedo value 2294, Soc Speedo value 2236, Gpu Speedo value 2059 [ 0.000000] Tegra12: CPU Speedo ID 5, Soc Speedo ID 0, Gpu Speedo ID 1 [ 0.000000] Tegra12: CPU Process ID 0,Soc Process ID 1,Gpu Process ID 0 [ 0.000000] Tegra Revision: A01 SKU: 0x87 CPU Process: 0 Core Process: 1 [ 0.000000] tegra: PLLP fixed rate: 408000000 [ 0.000000] tegra_clk_shared_bus_user_init: c2bus client se left ON [ 0.000000] tegra_clk_shared_bus_user_init: c4bus client vi left ON [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1044000000 [ 0.000000] Lowering sbus maximum rate from 420000000 to 372000000 [ 0.000000] Lowering vic03 maximum rate from 900000000 to 756000000 [ 0.000000] Lowering tsec maximum rate from 900000000 to 756000000 [ 0.000000] Lowering msenc maximum rate from 600000000 to 480000000 [ 0.000000] Lowering se maximum rate from 600000000 to 480000000 [ 0.000000] Lowering vde maximum rate from 600000000 to 480000000 [ 0.000000] Lowering host1x maximum rate from 500000000 to 408000000 [ 0.000000] Lowering vi maximum rate from 700000000 to 600000000 [ 0.000000] Lowering isp maximum rate from 700000000 to 600000000 [ 0.000000] Lowering c4bus maximum rate from 700000000 to 600000000 [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000 [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000 [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000 [ 0.000000] Lowering hdmi maximum rate from 594000000 to 297000000 [ 0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000 [ 0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000 [ 0.000000] Lowering gbus maximum rate from 1032000000 to 852000000 [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 2065500000 [ 0.000000] tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled [ 0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled [ 0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled [ 0.000000] Switching to timer-based delay loop [ 0.000000] tegra_powergate_init: DONE [ 0.000000] tegra12_plle_clk_enable: pll_e is already enabled [ 0.000000] PERCPU: Embedded 9 pages/cpu @c200f000 s15168 r8192 d13504 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 490768 [ 0.000000] Kernel command line: console=ttyS0,115200n8 console=tty1 no_console_suspend=1 lp0_vec=2064@0xf46ff000 mem=2015M@2048M memtype=2t [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1923MB = 1923MB total [ 0.000000] Memory: 1918948k/1918948k available, 144412k reserved, 1190908K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0bd8870 (12099 kB) [ 0.000000] .init : 0xc0bd9000 - 0xc0c58b40 ( 511 kB) [ 0.000000] .data : 0xc0c5a000 - 0xc0dbc45c (1418 kB) [ 0.000000] .bss : 0xc0dbc45c - 0xc0e47d9c ( 559 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:960 [ 0.000000] the number of interrupt controllers found is 5 [ 0.000000] Architected local timer running at 12.00MHz (phys). [ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns [ 0.000000] Ignoring duplicate/late registration of read_current_timer delay [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.002940] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=12000 [ 0.002996] pid_max: default: 32768 minimum: 301 [ 0.003296] Mount-cache hash table entries: 512 [ 0.025024] Initializing cgroup subsys debug [ 0.025061] Initializing cgroup subsys freezer [ 0.025135] CPU: Testing write buffer coherency: ok [ 0.025196] ftrace: allocating 31222 entries in 61 pages [ 0.066270] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.066311] Setting up static identity map for 0xc08b4240 - 0xc08b42d4 [ 0.070306] ftrace: Allocated trace_printk buffers [ 0.077931] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080948] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.083992] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.084176] Brought up 4 CPUs [ 0.084250] SMP: Total of 4 processors activated. [ 0.084267] CPU: All CPU(s) started in SVC mode. [ 0.085186] devtmpfs: initialized [ 0.094101] pinctrl core: initialized pinctrl subsystem [ 0.094439] regulator-dummy: no parameters [ 0.095147] NET: Registered protocol family 16 [ 0.097588] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.098858] tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver [ 0.100260] console [pstore-1] enabled [ 0.100297] ramoops: attached 0x200000@0xf8300000, ecc: 0/0 [ 0.100685] cpuidle: using governor ladder [ 0.100706] cpuidle: using governor menu [ 0.104501] ardbeg_camera_auxdata: update camera lookup table. [ 0.113182] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default [ 0.113581] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio [ 0.120361] Wake16 for irq=34 [ 0.122775] Wake58 for irq=81 [ 0.122842] Wake41 for irq=129 [ 0.122860] Wake43 for irq=129 [ 0.122905] Wake40 for irq=53 [ 0.122921] Wake42 for irq=53 [ 0.127101] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x02:0x43:0x00 [ 0.127182] board_info: id:sku:fab:major:minor = 0x0177:0x0000:0x02:0x43:0x00 [ 0.127242] Selecting UARTD as the debug console [ 0.127281] The debug console clock name is uartd [ 0.127549] ardbeg_modem_init: modem_id = 0 [ 0.130157] Clear bootloader IO dpd settings [ 0.130392] Loading jetson TK1 2GB SS EMC tables. [ 0.130634] tegra: pll_m is selected as scalable EMC clock source [ 0.130675] Lowering emc maximum rate from 1200000000 to 924000000 [ 0.130699] tegra: validated EMC DFS table [ 0.130825] ardbeg_edp_init: CPU regulator 12500 mA [ 0.375668] ardbeg_edp_init: GPU regulator 11400 mA [ 0.376602] swapper/0 isomgr_init(): iso emc max clk=924000KHz [ 0.376621] swapper/0 isomgr_init(): max_iso_bw=7392000KB[ 0.376956] ardbeg_touch_init init raydium touch [ 0.377114] Raydium - touch platform_id : 8 [ 0.460059] platform tegradc.0: IOVA linear map 0xf8500000(1200000) [ 0.463359] platform tegradc.0: IOVA linear map 0xf9700000(4800000) [ 0.468369] platform tegradc.1: IOVA linear map 0xf8500000(1200000) [ 0.471666] platform tegradc.1: IOVA linear map 0xf9700000(4800000) [ 0.472113] FUSE: cp_rev 0 ft_rev 0 [ 0.472287] tegra11_soctherem_oc_int_init(): OC interrupts are not enabled [ 0.472687] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.472716] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.473005] mc-err: Started MC error interface! [ 0.483988] bio: create slab at 0 [ 0.485822] reg-fixed-voltage 0.regulator: Consumer c1 does not have device name [ 0.485856] reg-fixed-voltage 0.regulator: Consumer c2 does not have device name [ 0.485984] vdd-ac-bat: 8400 mV [ 0.486144] reg-fixed-voltage 1.regulator: Consumer c1 does not have device name [ 0.486176] reg-fixed-voltage 1.regulator: Consumer c2 does not have device name [ 0.486296] vdd-3v3-aon: 3300 mV [ 0.486445] reg-fixed-voltage 8.regulator: Consumer c1 does not have device name [ 0.486476] reg-fixed-voltage 8.regulator: Consumer c2 does not have device name [ 0.486505] reg-fixed-voltage 8.regulator: Consumer c3 does not have device name [ 0.486539] reg-fixed-voltage 8.regulator: Consumer c6 does not have device name [ 0.486567] reg-fixed-voltage 8.regulator: Consumer c7 does not have device name [ 0.486594] reg-fixed-voltage 8.regulator: Consumer c8 does not have device name [ 0.486621] reg-fixed-voltage 8.regulator: Consumer c9 does not have device name [ 0.486648] reg-fixed-voltage 8.regulator: Consumer c10 does not have device name [ 0.486676] reg-fixed-voltage 8.regulator: Consumer c11 does not have device name [ 0.486705] reg-fixed-voltage 8.regulator: Consumer c12 does not have device name [ 0.486840] reg-3v3-supply: 3300 mV [ 0.488430] vgaarb: loaded [ 0.489038] SCSI subsystem initialized [ 0.489421] usbcore: registered new interface driver usbfs [ 0.489484] usbcore: registered new interface driver hub [ 0.489599] usbcore: registered new device driver usb [ 0.492441] as3722 4-0040: AS3722 ID: ID1:ID2:ID3 = 0x0c:0x01:0x15 [ 0.492470] as3722 4-0040: Final OTP version 1V21 [ 0.497261] gpiochip_add: registered GPIOs 1016 to 1023 on device: as3722-gpio [ 0.497459] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.497515] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.497565] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.497596] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.497626] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.497655] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.497708] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.497739] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.497768] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.497798] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.497827] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name [ 0.497856] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.497886] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name [ 0.497948] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.497978] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.498007] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.498037] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.498068] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.498100] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name [ 0.498129] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.498158] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name [ 0.498206] as3722-regulator as3722-regulator.0: Consumer c11 does not have device name [ 0.498237] as3722-regulator as3722-regulator.0: Consumer c12 does not have device name [ 0.498266] as3722-regulator as3722-regulator.0: Consumer c13 does not have device name [ 0.498295] as3722-regulator as3722-regulator.0: Consumer c14 does not have device name [ 0.498324] as3722-regulator as3722-regulator.0: Consumer c15 does not have device name [ 0.498374] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.498404] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.498453] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.498482] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.498512] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.498540] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name [ 0.498569] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name [ 0.498598] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name [ 0.498628] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name [ 0.498657] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name [ 0.498686] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.498740] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.498769] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.498854] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name [ 0.498883] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name [ 0.498912] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name [ 0.498963] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.499011] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.499041] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.499070] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.499122] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.499151] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.499230] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.499278] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.499308] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.499377] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name [ 0.499406] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name [ 0.499435] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name [ 0.500350] vdd-cpu: 650 <--> 1300 mV at 1000 mV 3500 mA [ 0.501113] vdd-core: applied init 1150000uV constraint [ 0.501714] vdd-core: 700 <--> 1350 mV at 1150 mV 3500 mA [ 0.502897] vddio-ddr: at 1350 mV [ 0.503224] as3722-sd3: no parameters [ 0.503811] avdd-pll-pex: 1050 mV [ 0.505022] vdd-1v8: at 1800 mV [ 0.505374] vdd-gpu: applied init 1000000uV constraint [ 0.506249] vdd-gpu: 650 <--> 1200 mV at 1000 mV 3500 mA [ 0.506757] avdd-pll: at 1050 mV at 300 mA [ 0.508025] vdd-cam: 1800 mV at 150 mA [ 0.508698] avdd-dsi-csi: at 1200 mV at 150 mA [ 0.509911] vdd-rtc: 800 mV at 150 mA [ 0.510389] avdd-cam: 2800 mV at 150 mA [ 0.510880] vdd-1v2-cam: 1175 mV at 150 mA [ 0.511244] vddio-sdmmc-2: 1800 <--> 3300 mV at 150 mA [ 0.511760] vdd-1v1-cam: 1275 mV at 150 mA [ 0.512716] avdd-spi: 3300 mV at 150 mA [ 0.513214] vdd-2v7-cam: 2800 mV at 150 mA [ 0.513747] vpp-fuse: 1800 mV at 150 mA [ 0.514807] Linux video capture interface: v2.00 [ 0.515903] Advanced Linux Sound Architecture Driver Initialized. [ 0.516345] ardbeg_wifi_power: 1 [ 0.616696] usb0-vbus: 5000 mV [ 0.617002] usb1-usb2-vbus: 5000 mV [ 0.617307] vdd-hdmi: 5000 mV [ 0.617587] avdd-hdmi-pll: 3300 mV [ 0.617635] avdd-hdmi-pll: supplied by avdd-pll-pex [ 0.617799] reg-fixed-sync-voltage 6.regulator: Consumer c1 does not have device name [ 0.617937] vdd-lcd-bl: 3300 mV [ 0.618107] reg-fixed-sync-voltage 7.regulator: Consumer c1 does not have device name [ 0.618277] vdd-lcd-bl-en: 5000 mV [ 0.618427] reg-fixed-sync-voltage 9.regulator: Consumer c3 does not have device name [ 0.618542] reg-5v0-supply: 5000 mV [ 0.618720] reg-fixed-sync-voltage a.regulator: Consumer c1 does not have device name [ 0.618751] reg-fixed-sync-voltage a.regulator: Consumer c2 does not have device name [ 0.618780] reg-fixed-sync-voltage a.regulator: Consumer c3 does not have device name [ 0.618825] reg-fixed-sync-voltage a.regulator: Consumer c10 does not have device name [ 0.618854] reg-fixed-sync-voltage a.regulator: Consumer c11 does not have device name [ 0.618883] reg-fixed-sync-voltage a.regulator: Consumer c12 does not have device name [ 0.618910] reg-fixed-sync-voltage a.regulator: Consumer c13 does not have device name [ 0.618938] reg-fixed-sync-voltage a.regulator: Consumer c14 does not have device name [ 0.618966] reg-fixed-sync-voltage a.regulator: Consumer c15 does not have device name [ 0.619110] reg-1v8-supply: 1800 mV [ 0.619431] reg-fixed-sync-voltage b.regulator: Consumer c1 does not have device name [ 0.619583] reg-dcdc-1v2: 1200 mV [ 0.619752] reg-fixed-sync-voltage c.regulator: Consumer c7 does not have device name [ 0.619783] reg-fixed-sync-voltage c.regulator: Consumer c8 does not have device name [ 0.620343] as3722-gpio2-supply: 3300 mV [ 0.620548] reg-fixed-sync-voltage d.regulator: Consumer c1 does not have device name [ 0.621065] as3722-gpio4-supply: 3300 mV [ 0.621373] sdmmc-en-supply: 3300 mV [ 0.621626] vdd-cdc-1v2-aud: 1200 mV [ 0.621780] reg-fixed-sync-voltage 10.regulator: Consumer c1 does not have device name [ 0.621813] reg-fixed-sync-voltage 10.regulator: Consumer c2 does not have device name [ 0.621841] reg-fixed-sync-voltage 10.regulator: Consumer c3 does not have device name [ 0.621965] reg-aon-1v8: 1800 mV [ 0.622130] reg-fixed-sync-voltage 11.regulator: Consumer c1 does not have device name [ 0.622245] reg-aon-1v2: 1200 mV [ 0.625233] as3722-adc-extcon as3722-adc-extcon.2: USB-Host is disconnected [ 0.628664] tegra: started io power detection dynamic control [ 0.628688] tegra: NO_IO_POWER setting 0x0 [ 0.628712] Switching to clocksource arch_sys_counter [ 0.649914] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.650097] nvmap_page_pool_init: Total MB RAM: 1889 [ 0.650120] nvmap_page_pool_init: nvmap page pool size: 60479 pages (236 MB) [ 0.650278] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.650454] iram: dma coherent mem declare 0x40001000,258048 [ 0.651296] misc nvmap: created heap iram base 0x40001000 size (252KiB) [ 0.651449] nvmap:inner cache maint threshold=2097152 [ 0.661132] Wake39 for irq=52 [ 0.661232] tegra-otg tegra-otg: otg transceiver registered [ 0.661582] NET: Registered protocol family 2 [ 0.662266] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.662468] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.662658] TCP: Hash tables configured (established 8192 bind 8192) [ 0.662715] TCP: reno registered [ 0.662739] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.662814] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.663113] NET: Registered protocol family 1 [ 0.663503] RPC: Registered named UNIX socket transport module. [ 0.663526] RPC: Registered udp transport module. [ 0.663544] RPC: Registered tcp transport module. [ 0.663562] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.663859] tegra-fuse tegra-fuse: Fuse driver initialized succesfully [ 0.668966] host1x host1x: initialized [ 0.670301] CPU PMU: probing PMU on CPU 0 [ 0.670335] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.670956] tegra_throttle : init passed [ 0.671069] Tegra cpuquiet initialized: disabled [ 0.671202] cpu-tegra: init EDP limit: 2065 MHz [ 0.672177] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 0.672548] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 0.672792] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type MEM-therm [ 0.673022] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.674515] bounce pool size: 64 pages [ 0.675923] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.676353] fuse init (API version 7.22) [ 0.676589] msgmni has been set to 1453 [ 0.678619] io scheduler noop registered (default) [ 0.880028] PCIE: port 0: link down, retrying [ 1.080185] PCIE: port 0: link down, retrying [ 1.280342] PCIE: port 0: link down, retrying [ 1.280361] PCIE: port 0: link down, ignoring [ 1.285529] PCI host bridge to bus 0000:00 [ 1.285556] pci_bus 0000:00: root bus resource [mem 0x32100000-0x3fffffff] [ 1.285583] pci_bus 0000:00: root bus resource [mem 0x12100000-0x320fffff pref] [ 1.285611] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 1.285635] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.286031] PCI: bus0: Fast back to back transfers disabled [ 1.286058] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.287832] PCI: bus1: Fast back to back transfers disabled [ 1.288161] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.288188] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.288430] pcieport 0000:00:00.0: BAR 8: assigned [mem 0x32100000-0x321fffff] [ 1.288463] pcieport 0000:00:00.0: BAR 9: assigned [mem 0x12100000-0x121fffff 64bit pref] [ 1.288495] pcieport 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 1.288524] pci 0000:01:00.0: BAR 4: assigned [mem 0x12100000-0x12103fff 64bit pref] [ 1.288569] pci 0000:01:00.0: BAR 2: assigned [mem 0x32100000-0x32100fff 64bit] [ 1.288612] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.288641] pcieport 0000:00:00.0: PCI bridge to [bus 01] [ 1.288665] pcieport 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 1.288691] pcieport 0000:00:00.0: bridge window [mem 0x32100000-0x321fffff] [ 1.288720] pcieport 0000:00:00.0: bridge window [mem 0x12100000-0x121fffff 64bit pref] [ 1.288760] PCIE: No Link speed change happened [ 1.289318] pwm-backlight pwm-backlight: unable to request PWM, trying legacy API [ 1.289422] sysedp_create_consumer: unable to create pwm-backlight, no consumer_data for pwm-backlight found [ 1.290327] tsec tsec: initialized [ 1.291833] isp isp.0: initialized [ 1.292814] isp isp.1: initialized [ 1.294356] falcon vic03.0: initialized [ 1.295533] falcon msenc: initialized [ 1.510859] tegradc tegradc.0: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 1.693108] tegra_edid_read_block: checksum failed [ 1.863521] tegra_edid_read_block: checksum failed [ 2.033869] tegra_edid_read_block: checksum failed [ 2.204190] tegra_edid_read_block: checksum failed [ 2.374576] tegra_edid_read_block: checksum failed [ 2.544968] tegra_edid_read_block: checksum failed [ 2.715342] tegra_edid_read_block: checksum failed [ 2.885706] tegra_edid_read_block: checksum failed [ 3.056007] tegra_edid_read_block: checksum failed [ 3.226343] tegra_edid_read_block: checksum failed [ 3.226807] tegradc tegradc.0: dp: Failed to get EDID data [ 3.267048] tegradc tegradc.0: probed [ 3.267579] tegradc tegradc.0: fb registered [ 3.267657] tegradc tegradc.0: dp: DPAUX_DP_AUXSTAT:0x10000000 HPD:plugged [ 3.273498] gpio wake4 for gpio=111 [ 3.301335] tegradc tegradc.1: nominal-pclk:297000000 parent:594000000 div:2.0 pclk:297000000 294030000~323730000 [ 3.302636] tegradc tegradc.1: probed [ 3.390173] Console: switching to colour frame buffer device 480x135 [ 3.473241] tegradc tegradc.1: fb registered [ 3.473358] hdmi_state_machine_worker (tid edb07080): state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 3.473546] hdmi_state_machine_set_state_l: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 3.476610] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels [ 3.477434] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.478847] serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra [ 3.513121] hdmi_state_machine_worker (tid edb07080): state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 3.513127] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 3.584666] hdmi_state_machine_worker (tid edb07080): state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 3.639431] panel size 60 by 34 [ 4.441944] dp: DPAUX_DP_AUXSTAT:0x00000000 HPD:unplugged [ 4.441948] dp: hpd unplugged [ 4.973969] dp: DPAUX_DP_AUXSTAT:0x10000000 HPD:plugged [ 4.973973] dp: hpd plugged [ 5.832924] console [ttyS0] enabled [ 5.833054] tegradc tegradc.1: nominal-pclk:297000000 parent:594000000 div:2.0 pclk:297000000 294030000~323730000 [ 5.833569] serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA [ 5.833895] serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA [ 5.834191] serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA [ 5.842971] brd: module loaded [ 5.846189] loop: module loaded [ 5.846488] nct1008_nct72 0-004c: success in enabling rail vdd_nct72 [ 5.850203] gpio wake35 for gpio=70 [ 5.850276] nct1008_nct72 0-004c: nct1008_probe: initialized [ 5.850900] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 5.851927] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 5.853847] tegra_profiler: Branch: Dev [ 5.853850] tegra_profiler: Version: 1.103 [ 5.853854] tegra_profiler: Samples version: 34 [ 5.853857] tegra_profiler: IO version: 18 [ 5.853863] armv7_pmu: arch: Cortex A15, type: 4, ver: 0 [ 5.854038] tegra_profiler: auth: init [ 5.854423] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0 [ 5.855874] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode [ 5.855886] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pmp pio slum part sadm apst [ 5.857073] scsi0 : tegra-sata [ 5.857457] scsi1 : tegra-sata [ 5.857696] ata1: SATA max UDMA/133 irq 55 [ 5.857700] ata2: DUMMY [ 5.859702] tun: Universal TUN/TAP device driver, 1.6 [ 5.859706] tun: (C) 1999-2004 Max Krasnyansky [ 5.859960] usbcore: registered new interface driver asix [ 5.860005] usbcore: registered new interface driver ax88179_178a [ 5.860043] usbcore: registered new interface driver cdc_ether [ 5.860100] usbcore: registered new interface driver smsc95xx [ 5.860137] usbcore: registered new interface driver cdc_subset [ 5.860202] usbcore: registered new interface driver cdc_ncm [ 5.860220] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.860431] ehci-pci: EHCI PCI platform driver [ 5.860701] tegra_xusb_read_usb_calib: usb_calib0 = 0x02c6838d [ 5.861144] usbcore: registered new interface driver usb-storage [ 5.861245] usbcore: registered new interface driver usbserial [ 5.861284] usbcore: registered new interface driver option [ 5.861316] usbserial: USB Serial support registered for GSM modem (1-port) [ 5.861350] usbcore: registered new interface driver pl2303 [ 5.861379] usbserial: USB Serial support registered for pl2303 [ 5.861384] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012) [ 5.861540] tegra USB phy - inst[0] platform info: [ 5.861543] port_otg: yes [ 5.861545] has_hostpc: yes [ 5.861548] phy_interface: USB_PHY_INTF_UTMI [ 5.861551] op_mode: TEGRA_USB_OPMODE_DEVICE [ 5.861554] qc2_voltage: 0 [ 5.861557] vbus_pmu_irq: 0 [ 5.861559] vbus_gpio: -1 [ 5.861562] charging: disabled [ 5.861565] remote_wakeup: disabled [ 5.866941] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled [ 5.870060] as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0 [ 5.870067] as3722-rtc as3722-rtc.1: RTC interrupt 449 [ 5.872738] i2c /dev entries driver [ 5.873980] virtual_init [ 5.875977] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os [ 5.876754] tegra_dtv_probe: probing dtv. [ 5.877125] setup_stream: bufsize = 4096, bufnum = 4 [ 5.877125] ar0832_init: ++ [ 5.877485] i2c-core: driver [max77387] using legacy suspend method [ 5.877489] i2c-core: driver [max77387] using legacy resume method [ 5.877540] i2c-core: driver [as364x] using legacy suspend method [ 5.877543] i2c-core: driver [as364x] using legacy resume method [ 5.877691] [IMX135] sensor driver loading [ 5.877740] [IMX179] sensor driver loading [ 5.877810] [imx132] sensor driver loading [ 5.877849] [AR0330] sensor driver loading [ 5.877894] [ar0261] sensor driver loading [ 5.878728] usbcore: registered new interface driver uvcvideo [ 5.878730] USB Video Class driver (1.1.1) [ 5.879650] zram: Created 1 device(s) ... [ 5.880758] tegra_wdt tegra_wdt.0: last reset is due to power on reset [ 5.880948] WDT heartbeat enabled on probe [ 5.880952] tegra_wdt_probe done [ 5.881270] sdhci: Secure Digital Host Controller Interface driver [ 5.881273] sdhci: Copyright(c) Pierre Ossman [ 5.881276] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.881663] sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required. [ 5.881849] sdhci-tegra sdhci-tegra.3: Speedo value 2236 [ 5.881856] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1150 [ 6.017811] otg state changed: SUSPEND --> PERIPHERAL [ 6.162831] ata1: SATA link down (SStatus 0 SControl 300) [ 6.460820] handle_check_edid_l: audio_switch 1 [ 6.465459] Display connected, hpd_switch 1 [ 6.469733] handle_check_edid_l: setting audio and infoframes [ 6.475640] hdmi_state_machine_set_state_l: switching from state 2 (Check EDID) to state 4 (Enabled) [ 6.484959] hdmi_state_machine_worker (tid edb07080): state 4 (Enabled), hpd 1, pending_hpd_evt 0 [ 6.494371] mmc0: no vqmmc regulator found [ 6.494388] mmc0: no vmmc regulator found [ 6.494392] mmc0: Invalid maximum block size, assuming 512 bytes [ 6.517819] sysedp_create_consumer: unable to create sdhci-tegra.3, no consumer_data for sdhci-tegra.3 found [ 6.517820] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA [ 6.518745] sdhci-tegra sdhci-tegra.2: Speedo value 2236 [ 6.518753] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1150 [ 6.583823] mmc0: BKOPS_EN bit is not set [ 6.588938] sdhci-tegra sdhci-tegra.3: Found T2T coeffs data [ 6.588947] sdhci-tegra sdhci-tegra.3: 200MHz tap hole coeffs found [ 7.172673] **********Auto tuning windows************* [ 7.187623] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 7.202817] win[0]: 13(0) - 85(1) [ 7.215822] win[1]: 98(0) - 169(1) [ 7.215878] mmc1: no vqmmc regulator found [ 7.215896] mmc1: no vmmc regulator found [ 7.215900] mmc1: Invalid maximum block size, assuming 512 bytes [ 7.237824] sysedp_create_consumer: unable to create sdhci-tegra.2, no consumer_data for sdhci-tegra.2 found [ 7.237825] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA [ 7.308737] win[2]: 182(0) - 253(1) [ 7.308857] gpio wake56 for gpio=170 [ 7.312292] tegra-se tegra12-se: tegra_se_probe: complete [ 7.314962] usbcore: registered new interface driver usbhid [ 7.314964] usbhid: USB HID core driver [ 7.315421] tegra-hier-ictlr tegra-hier-ictlr: probed [ 7.316877] hda-intel tegra30-hda: chipset global capabilities = 0x2403 [ 7.320325] hda-intel tegra30-hda: codec_mask = 0x8 [ 7.320499] hda-intel tegra30-hda: Enable delay in RIRB handling [ 7.322815] hda-intel tegra30-hda: codec #3 probed OK [ 7.394819] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1 [ 7.474886] *************************************** [ 7.490085] ********tuning windows after inserting holes***** [ 7.506178] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 7.522021] win[0]:13(0) - 44(2) [ 7.535549] win[1]:46(2) - 85(1) [ 7.549010] win[2]:98(0) - 128(2) [ 7.562475] win[3]:130(2) - 169(1) [ 7.576011] win[4]:182(0) - 212(2) [ 7.589484] win[5]:214(2) - 253(1) [ 7.602904] *********************************************** [ 7.618457] **********Tuning values********* [ 7.632622] **estimated values** [ 7.645638] T2T_Vmax 57, T2T_Vmin 80, 1'st_hole_Vmax 47, UI_Vmax 87 [ 7.661716] **Calculated values** [ 7.674803] T2T_Vmax 59, 1'st_hole_Vmax 45, UI_Vmax 84 [ 7.689711] T2T_Vmin 59, 1'st_hole_Vmin 45, UI_Vmin 84 [ 7.703807] HDMI: detected monitor LG Ultra HD at connection type HDMI [ 7.703812] HDMI: available speakers: FL/FR [ 7.703823] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24 [ 7.704488] usbcore: registered new interface driver snd-usb-audio [ 7.705151] MAX98090 driver built on Nov 23 2017 at 16:56:28 [ 7.709249] tegra_offload_platform probe successfull. [ 7.709253] succefully registered offload ops [ 7.813812] *********************************** [ 7.828120] ***********final tuning windows********** [ 7.842884] win[0]: 29 - 35 [ 7.855400] win[1]: 56 - 69 [ 7.867821] win[2]: 114 - 113 [ 7.880424] win[3]: 146 - 153 [ 7.893010] win[4]: 198 - 192 [ 7.905586] win[5]: 235 - 237 [ 7.918122] ******************************** [ 7.931971] best tap win - (56-69), best tap value 62 prev_best_tap 0 [ 7.971417] tegra30_avp_audio_platform_probe successful. [ 7.971418] rt5639 0-001c: read 0xfd=0x6 [ 8.013276] rt5639 0-001c: ASoC: mux INR Mux has no paths [ 8.028211] rt5639 0-001c: ASoC: mux INL Mux has no paths [ 8.044029] gpio wake49 for gpio=143 [ 8.531782] **********Auto tuning windows************* [ 8.546448] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 8.561463] win[0]: 13(0) - 85(1) [ 8.574280] win[1]: 98(0) - 170(1) [ 8.587124] win[2]: 181(0) - 253(1) [ 8.600071] *************************************** [ 8.614465] ********tuning windows after inserting holes***** [ 8.629792] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE [ 8.644895] win[0]:13(0) - 45(2) [ 8.657781] win[1]:47(2) - 85(1) [ 8.670592] win[2]:98(0) - 130(2) [ 8.683444] win[3]:132(2) - 170(1) [ 8.696339] win[4]:181(0) - 215(2) [ 8.709220] win[5]:217(2) - 253(1) [ 8.722074] *********************************************** [ 8.737217] **********Tuning values********* [ 8.750975] **estimated values** [ 8.763672] T2T_Vmax 57, T2T_Vmin 80, 1'st_hole_Vmax 47, UI_Vmax 87 [ 8.779443] **Calculated values** [ 8.792225] T2T_Vmax 58, 1'st_hole_Vmax 46, UI_Vmax 85 [ 8.806812] T2T_Vmin 58, 1'st_hole_Vmin 46, UI_Vmin 86 [ 8.821383] *********************************** [ 8.835362] ***********final tuning windows********** [ 8.849887] win[0]: 30 - 36 [ 8.862118] win[1]: 57 - 68 [ 8.874348] win[2]: 115 - 116 [ 8.886725] win[3]: 148 - 153 [ 8.899127] win[4]: 198 - 196 [ 8.911521] win[5]: 239 - 236 [ 8.923896] ******************************** [ 8.937506] best tap win - (57-68), best tap value 62 prev_best_tap 62 [ 8.953382] sdhci-tegra sdhci-tegra.3: sdhci_tegra_verify_best_tap: tuning freq 200000000hz, best tap 62 [ 8.974592] mmc0: new HS200 MMC card at address 0001 [ 8.989184] mmcblk mmc0:0001: Card claimed for testing. [ 9.004146] mmcblk0: mmc0:0001 CJNB4R 58.2 GiB [ 9.018336] mmcblk0rpmb: mmc0:0001 CJNB4R partition 3 4.00 MiB [ 9.035424] Alternate GPT is invalid, using primary GPT. [ 9.050244] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 9.059813] rt5639 0-001c: rt5639_headset_detect RT5639_PWR_ANLG1(0x63) = 0xa814 [ 9.060038] rt5639 0-001c: rt5639_headset_detect RT5639_IRQ_CTRL2(0xbe) = 0x0 [ 9.122353] rt5639 0-001c: rt5639_headset_detect jack_type = 2 [ 9.138110] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> tegra30-i2s.1 mapping ok [ 9.156758] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-spdif mapping ok [ 9.175167] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-i2s.3 mapping ok [ 9.193426] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> dit-hifi mapping ok [ 9.211483] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> dit-hifi mapping ok [ 9.229224] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback [ 9.246359] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture [ 9.263346] tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok [ 9.282517] compress asoc: snd-soc-dummy-dai <-> tegra-offload-compr mapping ok [ 9.300268] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback [ 9.317472] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture [ 9.334490] tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok [ 9.353851] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> tegra30-i2s.1 mapping ok [ 9.375466] input: tegra-rt5639 Headphone Jack as /devices/platform/tegra-snd-rt5639.0/sound/card1/input0 [ 9.395958] sysedp_create_consumer: unable to create speaker, no consumer_data for speaker found [ 9.405466] oprofile: using timer interrupt. [ 9.429578] GACT probability NOT on [ 9.442820] Mirror/redirect action on [ 9.456192] u32 classifier [ 9.468510] Actions configured [ 9.481505] Netfilter messages via NETLINK v0.30. [ 9.495860] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 9.512015] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 9.528664] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 9.544382] xt_time: kernel timezone is -0000 [ 9.558601] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.573622] arp_tables: (C) 2002 David S. Miller [ 9.587837] TCP: cubic registered [ 9.600868] NET: Registered protocol family 10 [ 9.615512] mip6: Mobile IPv6 [ 9.627920] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.642875] sit: IPv6 over IPv4 tunneling driver [ 9.657742] NET: Registered protocol family 17 [ 9.671523] NET: Registered protocol family 15 [ 9.685282] Bridge firewalling registered [ 9.698623] NET: Registered protocol family 35 [ 9.712369] NET: Registered protocol family 37 [ 9.726058] NET: Registered protocol family 41 [ 9.741080] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 9.781345] Registering SWP/SWPB emulation handler [ 9.795410] last reset is due to power on reset [ 9.795410] [ 9.819852] Disabling clocks left on by bootloader: [ 9.833881] audio_2x [ 9.845422] audio [ 9.856604] audio4 [ 9.867852] audio3 [ 9.879043] audio2 [ 9.890175] audio1 [ 9.901260] audio0 [ 9.912368] hdmi_audio [ 9.923700] entropy [ 9.934739] dsi2-fixed [ 9.946011] dsi1-fixed [ 9.957257] mipi-cal-fixed [ 9.968801] nor [ 9.979320] trace [ 9.989970] sdmmc4_ddr [ 10.001005] sdmmc3_ddr [ 10.012025] cclk_lp [ 10.022744] pll_x_out0 [ 10.033731] pll_m_out1 [ 10.044816] tegra_dvfs: vdd_cpu connected to regulator [ 10.058433] tegra_dvfs: vdd_core connected to regulator [ 10.072142] tegra_dvfs: vdd_gpu connected to regulator [ 10.086920] tegra_dvfs: registered vdd_cpu simon notifier [ 10.101000] cpu_cold cooling device is registered [ 10.114305] cpu_hot cooling device is registered [ 10.114390] Tegra CPU DFLL is initialized with use_dfll = 1 [ 10.114452] CPU rate: 696 MHz [ 10.291453] tegra dvfs: tegra sysfs cap interface is initialized [ 10.305526] tegra dvfs: tegra sysfs gpu & emc interface is initialized [ 10.320157] tegra dvfs: registered vdd_gpu simon notifier [ 10.334113] tegra_actmon.emc: Completed initialization (0) [ 10.347865] tegra_actmon.avp: Completed initialization (0) [ 10.361497] tegra_mon.cpu_emc: Completed initialization (0) [ 10.378006] reg-aon-1v2: incomplete constraints, leaving on [ 10.391717] reg-aon-1v8: incomplete constraints, leaving on [ 10.405398] sdmmc-en-supply: incomplete constraints, leaving on [ 10.419297] as3722-gpio4-supply: incomplete constraints, leaving on [ 10.433564] reg-dcdc-1v2: incomplete constraints, leaving on [ 10.447167] reg-5v0-supply: incomplete constraints, leaving on [ 10.461149] vdd-lcd-bl-en: incomplete constraints, leaving on [ 10.475094] vdd-lcd-bl: incomplete constraints, leaving on [ 10.488824] usb1-usb2-vbus: incomplete constraints, leaving on [ 10.502952] usb0-vbus: incomplete constraints, leaving on [ 10.516690] vpp-fuse: incomplete constraints, leaving on [ 10.530352] vdd-2v7-cam: incomplete constraints, leaving on [ 10.544267] avdd-spi: incomplete constraints, leaving on [ 10.557908] vdd-1v1-cam: incomplete constraints, leaving on [ 10.571823] vddio-sdmmc-2: incomplete constraints, leaving on [ 10.585931] vdd-1v2-cam: incomplete constraints, leaving on [ 10.599923] avdd-cam: incomplete constraints, leaving on [ 10.613656] avdd-dsi-csi: incomplete constraints, leaving on [ 10.627743] vdd-cam: incomplete constraints, leaving on [ 10.641389] as3722-sd3: incomplete constraints, leaving on [ 10.655321] vdd-3v3-aon: incomplete constraints, leaving on [ 10.669366] vdd-ac-bat: incomplete constraints, leaving on [ 10.683354] regulator-dummy: incomplete constraints, leaving on [ 10.698567] gpio wake51 for gpio=128 [ 10.710934] input: gpio-keys.3 as /devices/platform/gpio-keys.3/input/input1 [ 10.727414] as3722-rtc as3722-rtc.1: setting system clock to 2000-01-01 01:37:32 UTC (946690652) [ 10.745815] ALSA device list: [ 10.755385] #0: HDA NVIDIA Tegra at 0x70038000 irq 113 [ 10.767417] #1: tegra-rt5639 [ 10.778375] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 10.794107] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 10.995293] EXT4-fs (mmcblk0p1): 8 orphan inodes deleted [ 11.008568] EXT4-fs (mmcblk0p1): recovery complete [ 11.030366] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 11.046699] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 11.063168] devtmpfs: mounted [ 11.074675] Freeing unused kernel memory: 508K (c0bd9000 - c0c58000) [ 11.300183] init: plymouth-upstart-bridge main process (131) terminated with status 1 [ 11.319254] init: plymouth-upstart-bridge main process ended, respawning [ 11.383604] init: plymouth-upstart-bridge main process (141) terminated with status 1 [ 11.400988] init: plymouth-upstart-bridge main process ended, respawning [ 11.423223] init: ureadahead main process (134) terminated with status 5 [ 11.470501] init: plymouth-upstart-bridge main process (146) terminated with status 1 [ 11.487750] init: plymouth-upstart-bridge main process ended, respawning * Starting Mount filesystems on boot[ OK ] * Starting Signal sysvinit that the rootfs is mounted[ OK ] * Starting Clean /tmp directory[ OK ] * Starting Populate and link to /run filesystem[ OK ] * Stopping Populate and link to /run filesystem[ OK ] * Stopping Clean /tmp directory[ OK ] * Stopping Track if upstart is running in a container[ OK ] * Starting Initialize or finalize resolvconf[ OK ] * Starting Signal sysvinit that virtual filesystems are mounted[ OK ] * Starting Signal sysvinit that virtual filesystems are mounted[ OK ] * Starting Bridge udev events into upstart[ OK ] * Starting Signal sysvinit that local filesystems are mounted[ OK ] * Starting device node and kernel event manager[ OK ] * Starting Signal sysvinit that remote filesystems are mounted[ OK ] * Stopping Mount filesystems on boot[ OK ] * Starting NFSv4 id <-> name mapper[ OK ] * Starting flush early job output to logs[ OK ] * Starting NVIDIA specific init script[ OK ] * Starting load modules from /etc/modules[ OK ] * Starting cold plug devices[ OK ] * Starting log initial device creation[ OK ] * Starting D-Bus system message bus[ OK ] * Stopping load modules from /etc/modules[ OK ] * Stopping flush early job output to logs[ OK ] * Starting SystemD login management service[ OK ] * Starting NFSv4 id <-> name mapper[ OK ] * Stopping NVIDIA specific init script[ OK ] * Starting bluetooth daemon[ OK ] * Stopping rpcsec_gss daemon[ OK ] * Starting system logging daemon[ OK ] * Stopping NVIDIA specific first-boot script[ OK ] * Starting set console font[ OK ] * Starting NFSv4 id <-> name mapper[ OK ] * Stopping set console font[ OK ] * Starting userspace bootsplash[ OK ] * Starting Send an event to indicate plymouth is up[ OK ] * Starting CUPS printing spooler/server[ OK ] * Starting mDNS/DNS-SD daemon[ OK ] * Starting Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ] * Stopping userspace bootsplash[ OK ] * Stopping Send an event to indicate plymouth is up[ OK ] * Stopping cold plug devices[ OK ] * Stopping log initial device creation[ OK ] * Starting NFSv4 id <-> name mapper[ OK ] * Stopping Reload cups, upon starting avahi-daemon to make sure remote queues are populated[ OK ] * Starting configure network device security[ OK ] * Starting cups-browsed - Bonjour remote printer browsing daemon[ OK ] * Starting enable remaining boot-time encrypted block devices[ OK ] * Starting NFSv4 id <-> name mapper[ OK ] * Starting System V initialisation compatibility[ OK ] * Starting modem connection manager[ OK ] * Starting configure network device security[ OK ] * Starting configure virtual network devices[ OK ] [ OK ]rting early crypto disks... * Starting configure network device security[ OK ] * Starting NFSv4 id <-> name mapper[ OK ] [ OK ]ting up X socket directories... * Starting configure network device[ OK ] * Starting network connection manager[ OK ] * Stopping System V initialisation compatibility[ OK ] * speech-dispatcher disabled; edit /etc/default/speech-dispatcher [ OK ]rting NTP server ntpd saned disabled; edit /etc/default/saned * Starting System V runlevel compatibility[ OK ] * Starting OpenSSH server[ OK ] * Starting save kernel messages[ OK ] tk1v2_1_7ss numid=97,iface=MIXER,name='Stereo ADC MIXL ADC2 Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off * Starting crash report submission daemon[ OK ] * Starting anac(h)ronistic cron[ OK ] * Starting regular background program processing daemon[ OK ] numid=95,iface=MIXER,name='Stereo ADC MIXR ADC2 Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off * Stopping save kernel messages[ OK ] numid=127,iface=MIXER,name='Int Mic Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off numid=17,iface=MIXER,name='ADC Capture Switch' ; type=BOOLEAN,access=rw------,values=2 : values=on,on numid=116,iface=MIXER,name='RECMIXL BST1 Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off numid=110,iface=MIXER,name='RECMIXR BST1 Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off numid=115,iface=MIXER,name='RECMIXL BST2 Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on numid=109,iface=MIXER,name='RECMIXR BST2 Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on numid=103,iface=MIXER,name='Stereo ADC L1 Mux' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'DIG MIX' ; Item #1 'ADC' : values=1 numid=102,iface=MIXER,name='Stereo ADC R1 Mux' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'DIG MIX' ; Item #1 'ADC' : values=1 * Starting NFSv4 id <-> name mapper[ OK ] numid=96,iface=MIXER,name='Stereo ADC MIXL ADC1 Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on numid=94,iface=MIXER,name='Stereo ADC MIXR ADC1 Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on * Starting automatic crash report generation[ OK ] numid=97,iface=MIXER,name='Stereo ADC MIXL ADC2 Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off numid=95,iface=MIXER,name='Stereo ADC MIXR ADC2 Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off numid=12,iface=MIXER,name='IN1 Mode Control' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'Single ended' ; Item #1 'Differential' : values=0 numid=14,iface=MIXER,name='IN2 Mode Control' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'Single ended' ; Item #1 'Differential' : values=0 numid=126,iface=MIXER,name='Mic Jack Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on * Stopping Restore Sound Card State[ OK ] Ubuntu 14.04.1 LTS tegra-ubuntu ttyS0 tegra-ubuntu login: ubuntu (automatic login) Last login: Sat Jan 1 01:04:33 UTC 2000 on ttyS0 Welcome to Ubuntu 14.04.1 LTS (GNU/Linux 3.10.40 armv7l) * Documentation: https://help.ubuntu.com/ [ 16.206450] 20171123.gk20a_pmu_enable_elpg()... [ 16.208664] 20171123.gk20a_pmu_enable_elpg()... [ 16.261016] 20171123.gk20a_pmu_enable_elpg()... [ 16.266989] 20171123.gk20a_pmu_enable_elpg()... [ 16.374664] 20171123.gk20a_pmu_enable_elpg()... [ 16.380067] 20171123.gk20a_pmu_enable_elpg()... ubuntu@tegra-ubuntu:~$ [ 17.154128] 20171123.gk20a_pmu_enable_elpg()... [ 17.283105] 20171123.gk20a_pmu_enable_elpg()... [ 17.288097] 20171123.gk20a_pmu_enable_elpg()... [ 17.661567] 20171123.gk20a_pmu_enable_elpg()... [ 17.666524] 20171123.gk20a_pmu_enable_elpg()... [ 17.838791] 20171123.gk20a_pmu_enable_elpg()... [ 17.843776] 20171123.gk20a_pmu_enable_elpg()... [ 17.856079] 20171123.gk20a_pmu_enable_elpg()... [ 17.861063] 20171123.gk20a_pmu_enable_elpg()... [ 17.866000] 20171123.gk20a_pmu_enable_elpg()... [ 18.749889] 20171123.gk20a_pmu_enable_elpg()... [ 18.753798] 20171123.gk20a_pmu_enable_elpg()... [ 18.759598] 20171123.gk20a_pmu_enable_elpg()... [ 18.787980] 20171123.gk20a_pmu_enable_elpg()... [ 18.796509] 20171123.gk20a_pmu_enable_elpg()... [ 18.814853] 20171123.gk20a_pmu_enable_elpg()... [ 18.819744] 20171123.gk20a_pmu_enable_elpg()... [ 18.824499] 20171123.gk20a_pmu_enable_elpg()... [ 19.230587] 20171123.gk20a_pmu_enable_elpg()... [ 19.239349] 20171123.gk20a_pmu_enable_elpg()... [ 19.286987] 20171123.gk20a_pmu_enable_elpg()... [ 19.293485] 20171123.gk20a_pmu_enable_elpg()... [ 19.326617] 20171123.gk20a_pmu_enable_elpg()... [ 19.331453] 20171123.gk20a_pmu_enable_elpg()... [ 19.336237] 20171123.gk20a_pmu_enable_elpg()... [ 19.566994] 20171123.gk20a_pmu_enable_elpg()... [ 19.572442] 20171123.gk20a_pmu_enable_elpg()... [ 30.398015] gk20a gk20a.0: gr_gk20a_wait_idle: timeout, ctxsw busy : 0, gr busy : 1 ubuntu@tegra-ubuntu:~$