=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2019.06.05 13:51:29 =~=~=~=~=~=~=~=~=~=~=~= [0000.187] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-bcc33104) [0000.195] I> Default Heap @ [0xd486400 - 0xd488400] [0000.200] I> DMA Heap @ [0x85200000 - 0x86200000] [0000.205] I> bit @ 0xd480000 [0000.208] I> BR-BCT relocated to 0xd7020000 [0000.212] I> Boot-device: eMMC [0000.216] I> sdmmc bdev is already initialized [0000.220] I> pmic: reset reason (nverc) : 0x0 [0000.224] I> Reading GPT from 512 for device 00000003 [0000.230] I> Reading GPT from 8388096 for device 00000003 [0000.238] I> Found 14 partitions in 00000003 device [0000.242] I> Reading GPT from 512 for device 00010003 [0000.249] I> Found 29 partitions in 00010003 device [0000.254] W> No valid slot number is found in scratch register [0000.260] W> Return default slot: _a [0000.263] I> A/B: bin_type (16) slot 0 [0000.267] I> Loading partition bpmp-fw at 0xd7800000 [0000.272] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.277] I> Addr: 0xd7800000, start-block: 58761224, num_blocks: 1 [0000.292] I> Binary(16) of size 532656 is loaded @ 0xd7800000 [0000.298] W> No valid slot number is found in scratch register [0000.304] W> Return default slot: _a [0000.307] I> A/B: bin_type (17) slot 0 [0000.311] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.316] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.321] I> Addr: 0xd79f0000, start-block: 58763640, num_blocks: 1 [0000.335] I> Binary(17) of size 465760 is loaded @ 0xd798e200 [0000.511] I> BPMP-FW load address = 0xd7800000 [0000.515] I> BPMP-FW DTB load address = 0x5018e200 [0000.520] I> Loading SCE-FW ... [0000.523] W> No valid slot number is found in scratch register [0000.528] W> Return default slot: _a [0000.532] I> A/B: bin_type (12) slot 0 [0000.535] I> Loading partition sce-fw at 0xd7300000 [0000.540] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.546] I> Addr: 0xd7300000, start-block: 58765640, num_blocks: 1 [0000.554] I> Binary(12) of size 76592 is loaded @ 0xd7300000 [0000.560] I> Init SCE [0000.562] I> Copy BTCM section [0000.565] W> No valid slot number is found in scratch register [0000.571] W> Return default slot: _a [0000.574] I> A/B: bin_type (13) slot 0 [0000.578] I> Loading partition cpu-bootloader at 0x96000000 [0000.583] I> Reading two headers - addr:0x96000000 blocks:1 [0000.589] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.600] I> Binary(13) of size 294432 is loaded @ 0x96000000 [0000.606] W> No valid slot number is found in scratch register [0000.612] W> Return default slot: _a [0000.615] I> A/B: bin_type (20) slot 0 [0000.619] I> Loading partition bootloader-dtb at 0x8520f400 [0000.624] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.630] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.641] I> Binary(20) of size 280272 is loaded @ 0x8520f400 [0000.647] I> MB2-params(VA) @ 0xd7000000 [0000.651] I> CPUBL-params(VA) @ 0xd7000000 [0000.655] I> CPUBL-params(PA) @ 0x277000000 [0000.659] I> CPU-BL loaded @ PA 0x96000000 [0000.663] I> Loading TOS ... [0000.665] W> No valid slot number is found in scratch register [0000.671] W> Return default slot: _a [0000.674] I> A/B: bin_type (14) slot 0 [0000.678] I> Loading partition secure-os at 0x8530f600 [0000.683] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.689] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.697] I> Binary(14) of size 62688 is loaded @ 0x8530f600 [0000.703] I> Copying Monitor (length: 0xf2e0) from 0x8530f800 to 0x40000000 [0000.710] I> Erasing Monitor @ 0x8530f800 [0000.714] I> Unhalting SCE [0000.717] I> Primary Memory Start:80000000 Size:70000000 [0000.722] I> Extended Memory Start:f0110000 Size:185ef0000 [0000.729] I> Waypoint2-ACK: 0x52013158 [0000.732] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.2(release):27881aa NOTICE: BL31: Built : 10:30:28, Mar 25 2019 NOTICE: Trusty image missing. ERROR: Error initializing runtime service trusty_fast [0001.091] I> Welcome to Cboot [0001.093] I> Cboot Version: 00.00.2014.50-t186-3b8f9c00 [0001.098] I> CPU-BL Params @ 0x277000000 [0001.102] I> 0) Base:0x00000000 Size:0x00000000 [0001.107] I> 1) Base:0x277f00000 Size:0x00100000 [0001.111] I> 2) Base:0x277e00000 Size:0x00100000 [0001.116] I> 3) Base:0x277d00000 Size:0x00100000 [0001.120] I> 4) Base:0x277c00000 Size:0x00100000 [0001.125] I> 5) Base:0x277b00000 Size:0x00100000 [0001.129] I> 6) Base:0x277800000 Size:0x00200000 [0001.134] I> 7) Base:0x277400000 Size:0x00400000 [0001.138] I> 8) Base:0x277a00000 Size:0x00100000 [0001.143] I> 9) Base:0x277300000 Size:0x00100000 [0001.147] I> 10) Base:0x276800000 Size:0x00800000 [0001.152] I> 11) Base:0x30000000 Size:0x00040000 [0001.156] I> 12) Base:0xf0000000 Size:0x00100000 [0001.161] I> 13) Base:0x30040000 Size:0x00001000 [0001.165] I> 14) Base:0x30048000 Size:0x00001000 [0001.170] I> 15) Base:0x30049000 Size:0x00001000 [0001.174] I> 16) Base:0x3004a000 Size:0x00001000 [0001.178] I> 17) Base:0x3004b000 Size:0x00001000 [0001.183] I> 18) Base:0x3004c000 Size:0x00001000 [0001.187] I> 19) Base:0x3004d000 Size:0x00001000 [0001.192] I> 20) Base:0x3004e000 Size:0x00001000 [0001.196] I> 21) Base:0x3004f000 Size:0x00001000 [0001.201] I> 22) Base:0x00000000 Size:0x00000000 [0001.205] I> 23) Base:0xf0100000 Size:0x00010000 [0001.209] I> 24) Base:0x00000000 Size:0x00000000 [0001.214] I> 25) Base:0x00000000 Size:0x00000000 [0001.218] I> 26) Base:0x00000000 Size:0x00000000 [0001.223] I> 27) Base:0x00000000 Size:0x00000000 [0001.227] I> 28) Base:0x84400000 Size:0x00400000 [0001.232] I> 29) Base:0x30000000 Size:0x00010000 [0001.236] I> 30) Base:0x278000000 Size:0x08000000 [0001.240] I> 31) Base:0x00000000 Size:0x00000000 [0001.245] I> 32) Base:0x276000000 Size:0x00600000 [0001.249] I> 33) Base:0x80000000 Size:0x70000000 [0001.254] I> 34) Base:0xf0110000 Size:0x185ef0000 [0001.258] I> 35) Base:0x00000000 Size:0x00000000 [0001.263] I> 36) Base:0x00000000 Size:0x00000000 [0001.267] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.272] I> 38) Base:0x84000000 Size:0x00400000 [0001.276] I> 39) Base:0x96000000 Size:0x02400000 [0001.281] I> 40) Base:0x85000000 Size:0x01200000 [0001.285] I> 41) Base:0x277000000 Size:0x00280000 [0001.290] I> 42) Base:0x00000000 Size:0x00000000 [0001.294] I> 43) Base:0x00000000 Size:0x00000000 [0001.298] GIC-SPI Target CPU: 4 [0001.302] Interrupts Init done [0001.305] calling constructors [0001.308] initializing heap [0001.311] initializing threads [0001.314] initializing timers [0001.317] creating bootstrap completion thread [0001.322] top of bootstrap2() [0001.325] CPU: ARM Cortex A57 [0001.328] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.333] initializing platform [0001.336] I> Boot-device: eMMC [0001.340] I> sdmmc bdev is already initialized [0001.344] I> Reading GPT from 512 for device 00000003 [0001.350] I> Reading GPT from 8388096 for device 00000003 [0001.357] I> Found 14 partitions in 00000003 device [0001.361] I> Reading GPT from 512 for device 00010003 [0001.367] I> Found 29 partitions in 00010003 device [0001.372] W> opt-in fuse is not set, skip fuse_burning [0001.377] I> Bl_dtb @0x8520f400 [0001.380] I> gpio framework initialized [0001.384] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver [0001.391] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver [0001.398] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.407] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.415] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.423] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.430] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xec [0001.436] E> i2c dev write failed [0001.439] E> tca9539_device_init: failed to write polar reg [0001.445] E> tegrabl_tca9539_init: failed to init device! [0001.450] E> GPIO TCA9539 driver init failed [0001.566] I> decompressor handler not found [0001.573] I> fixed regulator driver initialized [0001.608] I> register 'maxim' power off handle [0001.614] I> virtual i2c enabled [0001.617] I> registered 'maxim,max77620' pmic [0001.622] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.633] I> Find /i2c@c250000's alias i2c7 [0001.637] I> Reading eeprom i2c=7 address=0x50 [0001.667] I> Device at /i2c@c250000:0x50 [0001.671] I> Reading eeprom i2c=7 address=0x57 [0001.700] I> Device at /i2c@c250000:0x57 [0001.705] I> Find /i2c@c240000's alias i2c1 [0001.709] I> Reading eeprom i2c=1 address=0x51 [0001.714] E> i2c dev read failed [0001.717] E> eeprom: Retry to read I2C slave device. [0001.722] E> i2c dev read failed [0001.725] E> eeprom: Failed to read I2C slave device [0001.730] I> Eeprom read failed 0x1a89800d [0001.735] I> Find /i2c@3160000's alias i2c0 [0001.739] I> Reading eeprom i2c=0 address=0x50 [0001.743] E> i2c dev read failed [0001.746] E> eeprom: Failed to read I2C slave device [0001.751] I> Eeprom read failed 0x1a89800d [0001.756] I> Find /i2c@3180000's alias i2c2 [0001.760] I> Reading eeprom i2c=2 address=0x54 [0001.764] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.796] I> Disabling gpio chip_id = 2, gpio pin = 9 [0001.801] I> Device at /i2c@3180000:0x54 [0001.805] I> create_pm_ids: id: 3310-1000-B02-E, len: 15 [0001.810] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.821] I> create_pm_ids: id: 2597-0000-500-C, len: 15 [0001.826] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.837] I> create_pm_ids: id: 3326-1000-000-M, len: 15 [0001.842] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0001.857] I> found one nvdisp nodes at offset = 104444 [0001.862] I> found one nvdisp nodes at offset = 105360 [0001.872] I> enabling 'vdd-hdmi' regulator [0001.886] I> regulator 'vdd-hdmi' already enabled [0001.891] I> hdmi cable connected [0001.898] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts [0001.908] I> setting 'vdd-1v8' regulator to 1800000 micro volts [0001.914] I> found one nvdisp nodes at offset = 106164 [0001.933] I> edid read success [0001.949] I> edid read success [0001.952] I> width = 640, height = 480, frequency = 25174825 [0001.958] I> width = 640, height = 480, frequency = 25174825 [0001.963] I> width = 640, height = 480, frequency = 25174825 [0001.968] I> width = 640, height = 480, frequency = 25174825 [0001.974] I> width = 1920, height = 1080, frequency = 148500000 [0001.980] I> width = 720, height = 480, frequency = 27000000 [0001.985] I> width = 640, height = 480, frequency = 25174825 [0001.991] I> width = 720, height = 480, frequency = 26973026 [0001.996] I> width = 720, height = 480, frequency = 26973026 [0002.002] I> width = 720, height = 576, frequency = 26973026 [0002.007] I> width = 720, height = 576, frequency = 26973026 [0002.012] I> width = 1280, height = 720, frequency = 74175824 [0002.018] I> width = 1280, height = 720, frequency = 74175824 [0002.024] I> width = 1920, height = 1080, frequency = 148351648 [0002.029] I> width = 1920, height = 1080, frequency = 148351648 [0002.035] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.045] I> hdmi_enable, starting HDMI initialisation [0002.452] I> hdmi_enable, HDMI initialisation complete [0002.462] initializing target [0002.465] calling apps_init() [0002.468] starting app android_boot_app [0002.472] I> Gpio keyboard init success [0002.476] I> Kernel type = Normal [0002.479] I> Loading kernel/boot.img from storage ... [0002.484] W> No valid slot number is found in scratch register [0002.490] W> Return default slot: _a [0002.493] I> A/B: bin_type (0) slot 0 [0002.497] I> Loading partition kernel at 0xa8000000 [0003.257] I> tegrabl_auth_payload: partition kernel (bin_type 0) [0003.264] W> No valid slot number is found in scratch register [0003.270] W> Return default slot: _a [0003.273] I> A/B: bin_type (1) slot 0 [0003.276] I> Loading partition kernel-dtb at 0x92000000 [0003.288] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1) [0003.295] I> Kernel DTB @ 0x92000000 [0003.299] I> Checking boot.img header magic ... [0003.303] I> [OK] [0003.305] I> Valid boot.img @ 0xa8000000 [0003.308] I> decompressor handler not found [0003.312] I> Copying kernel image (488498 bytes) from 0xa8000800 to 0x80080000 ... [0003.320] I> Done [0003.321] I> Move ramdisk (len: 0) from 0xa8078000 to 0x9d000000 [0003.329] I> Updated bpmp info to DTB [0003.334] I> Ramdisk: Base: 0x9d000000; Size: 0x0 [0003.339] I> Updated initrd info to DTB [0003.342] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.350] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0003.357] I> disabled_core_mask: 0xffffff0c [0003.361] W> No valid slot number is found in scratch register [0003.366] W> Return default slot: _a [0003.370] I> Active slot suffix: [0003.373] I> add_boot_slot_suffix: slot_suffix = [0003.377] I> add_serialno: Serial Num = 0422018064851 [0003.382] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x969f0000 lut_mem2=0x2008@0x969ed000 tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2.1 androidboot.serialno=0422018064851 bl_prof_dataptr=0x10000@0x277040000 sdhci_tegra.en_boot_part_access=1 [0003.426] I> Updated bootarg info to DTB [0003.430] E> "plugin-manager" doesn't exist, creating [0003.435] E> "odm-data" doesn't exist, creating [0003.441] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:a5:c9:9b [0003.447] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:a5:c9:9c [0003.453] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:a5:c9:9d [0003.459] E> "ids" doesn't exist, creating [0003.463] E> "connection" doesn't exist, creating [0003.468] E> "configs" doesn't exist, creating [0003.472] I> create_pm_ids: id: 3310-1000-B02-E, len: 15 [0003.477] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.488] I> create_pm_ids: id: 2597-0000-500-C, len: 15 [0003.493] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.504] I> create_pm_ids: id: 3326-1000-000-M, len: 15 [0003.509] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0003.520] I> Adding plugin-manager/ids/3310-1000-B02=/i2c@c250000:module@0x50 [0003.527] E> "i2c@c250000" doesn't exist, creating [0003.532] E> "module@0x50" doesn't exist, creating [0003.537] I> Adding plugin-manager/ids/2597-0000-500=/i2c@c250000:module@0x57 [0003.544] E> "module@0x57" doesn't exist, creating [0003.548] I> Adding plugin-manager/ids/3326-1000-000=/i2c@3180000:module@0x54 [0003.555] E> "i2c@3180000" doesn't exist, creating [0003.560] E> "module@0x54" doesn't exist, creating [0003.567] I> Adding plugin-manager/ids/3310-1000-B02-E [0003.574] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.579] I> Adding plugin-manager/configs/3310-power-config 00 [0003.585] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.591] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.597] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.603] I> Adding plugin-manager/configs/3310-display-config 00 [0003.609] E> "chip-id" doesn't exist, creating [0003.613] I> Adding plugin-manager/chip-id/A02P [0003.619] I> added [base:0x80000000, size:0x70000000] to /memory [0003.625] I> added [base:0xf0200000, size:0x185e00000] to /memory [0003.631] I> added [base:0x276600000, size:0x200000] to /memory [0003.637] E> WARNING: Failed to pass NS DRAM ranges to TOS [0003.642] I> Updated memory info to DTB [0003.648] E> "reset" doesn't exist, creating [0003.652] E> "pmc-reset-reason" doesn't exist, creating [0003.657] E> "pmic-reset-reason" doesn't exist, creating [0003.663] I> disabled_core_mask: 0xffffff0c [0003.674] I> Add serial number as DT property [0003.679] I> tegrabl_load_kernel_and_dtb: Done U-Boot 2016.07-geb5c15b (Mar 25 2019 - 10:30:25 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 213 bytes read in 99 ms (2 KiB/s) p2771-0000 eMMC boot options 1: primary kernel Enter choice: 1: primary kernel Retrieving file: /boot/Image 20947216 bytes read in 552 ms (36.2 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x969f0000 lut_mem2=0x2008@0x969ed000 tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2.1 androidboot.serialno=0422018064851 bl_prof_dataptr=0x10000@0x277040000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 ## Flattened Device Tree blob at 92000000 Booting using the fdt blob at 0x92000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000092000000, end 0000000092049665 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.159-tegra (buildbrain@mobile-u64-2317) (gcc version 4.8.5 (GCC) ) #1 SMP PREEMPT Mon Mar 25 10:33:48 PDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] earlycon: Early serial console at MMIO32 0x3100000 (options '') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] Found tegra_fbmem2: 00800000@969f0000 [ 0.000000] Found lut_mem2: 00002008@969ed000 [ 0.000000] Reserved memory: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc1f5f9a000 s31232 r8192 d30208 u69632 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2019936 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x969f0000 lut_mem2=0x2008@0x969ed000 tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2.1 androidboot.serialno=0422018064851 bl_prof_dataptr=0x10000@0x277040000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7967548K/8208384K available (11608K kernel code, 1812K rwdata, 5724K rodata, 1168K init, 693K bss, 175300K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc2000000 - 0xffffffbdc9da0000 ( 125 MB actual) [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f6800000 ( 8040 MB) [ 0.000000] .init : 0xffffffc00116e000 - 0xffffffc001292000 ( 1168 KB) [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc00116e000 ( 17336 KB) [ 0.000000] .data : 0xffffffc0012b5000 - 0xffffffc00147a110 ( 1813 KB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000002] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009860] Console: colour dummy device 80x25 [ 0.014521] console [tty0] enabled [ 0.018077] bootconsole [uart0] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.159-tegra (buildbrain@mobile-u64-2317) (gcc version 4.8.5 (GCC) ) #1 SMP PREEMPT Mon Mar 25 10:33:48 PDT 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] earlycon: Early serial console at MMIO32 0x3100000 (options '') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] Found tegra_fbmem2: 00800000@969f0000 [ 0.000000] Found lut_mem2: 00002008@969ed000 [ 0.000000] Reserved memory: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 17 pages/cpu @ffffffc1f5f9a000 s31232 r8192 d30208 u69632 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2019936 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0x2772e0000 gpt tegra_fbmem2=0x800000@0x969f0000 lut_mem2=0x2008@0x969ed000 tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2.1 androidboot.serialno=0422018064851 bl_prof_dataptr=0x10000@0x277040000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7967548K/8208384K available (11608K kernel code, 1812K rwdata, 5724K rodata, 1168K init, 693K bss, 175300K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) [ 0.000000] 0xffffffbdc2000000 - 0xffffffbdc9da0000 ( 125 MB actual) [ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB) [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f6800000 ( 8040 MB) [ 0.000000] .init : 0xffffffc00116e000 - 0xffffffc001292000 ( 1168 KB) [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc00116e000 ( 17336 KB) [ 0.000000] .data : 0xffffffc0012b5000 - 0xffffffc00147a110 ( 1813 KB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000002] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009860] Console: colour dummy device 80x25 [ 0.014521] console [tty0] enabled [ 0.018077] bootconsole [uart0] disabled [ 0.022180] kmemleak: Kernel memory leak detector disabled [ 0.022192] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022205] pid_max: default: 32768 minimum: 301 [ 0.022254] Security Framework initialized [ 0.022296] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022306] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022672] Initializing cgroup subsys io [ 0.022686] Initializing cgroup subsys memory [ 0.022704] Initializing cgroup subsys devices [ 0.022713] Initializing cgroup subsys freezer [ 0.022724] Initializing cgroup subsys net_cls [ 0.022733] Initializing cgroup subsys perf_event [ 0.022742] Initializing cgroup subsys net_prio [ 0.022753] Initializing cgroup subsys pids [ 0.022761] Initializing cgroup subsys debug [ 0.022909] CPU0 ipc=752 [ 0.022919] CPU1 ipc=1024 [ 0.022927] CPU2 ipc=1024 [ 0.022936] CPU3 ipc=752 [ 0.022946] CPU4 ipc=752 [ 0.022956] CPU5 ipc=752 [ 0.022996] ASID allocator initialised with 65536 entries [ 0.046405] tegra-id: chipid=21817. [ 0.046424] tegra-id: opt_subrevision=1. [ 0.046438] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.047118] DTS File Name: /home/frank/Work/TX2/tegratx2_r28-3_org/source/public_sources/kernel_src/kernel/kernel-4.4/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.047150] DTB Build time: Jun 5 2019 13:37:45 [ 0.062459] CPU1: Booted secondary processor [4e0f0030] [ 0.074114] CPU2: Booted secondary processor [4e0f0030] [ 0.085809] CPU3: Booted secondary processor [411fd073] [ 0.097803] CPU4: Booted secondary processor [411fd073] [ 0.109802] CPU5: Booted secondary processor [411fd073] [ 0.109868] Brought up 6 CPUs [ 0.109926] SMP: Total of 6 processors activated. [ 0.109938] CPU: All CPU(s) started at EL2 [ 0.110412] devtmpfs: initialized [ 0.137944] Initilizing CustomIPI irq domain [ 0.138135] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.138165] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 0.139041] pinctrl core: initialized pinctrl subsystem [ 0.139219] OS set in device tree is not L4T. [ 0.139418] regulator-dummy: no parameters [ 0.139525] Initializing plugin-manager [ 0.139579] Plugin module not found [ 0.139990] node /plugin-manager/soc-prod-a02-fragment match with chip-id A02P [ 0.140327] node /plugin-manager/fragement@0 match with odm-data enable-denver-wdt [ 0.140936] node /plugin-manager/fragement@4 match with odm-data enable-denver-wdt [ 0.142124] node /plugin-manager/fragment-sdwake-p3310-1000-300 match with board >=3310-1000-300 [ 0.142480] node /plugin-manager/fragement-pmon-p3310-1000-300 match with board >=3310-1000-300 [ 0.142735] node /plugin-manager/fragement-pmon-p3310-1000-800 match with board >=3310-1000-800 [ 0.142955] node /plugin-manager/fragment-devslp@0 match with board >=3310-1000-200 [ 0.143379] node /plugin-manager/fragment-500-pcie-config match with board >=3310-1000-500 [ 0.143822] node /plugin-manager/fragment-500-xusb-config match with board >=3310-1000-500 [ 0.144101] node /plugin-manager/fragment-500-e3325-pcie match with board >=3310-1000-500 [ 0.144118] node /plugin-manager/fragment-500-e3325-pcie match with odm-data enable-pcie-on-uphy-lane0 [ 0.144600] node /plugin-manager/fragment-p3310-c00-comm match with board >=3310-1000-800 [ 0.144850] node /plugin-manager/fragment-p3310-c00-pmic match with board >=3310-1000-800 [ 0.145070] node /plugin-manager/fragment-p3310-c01 match with board >=3310-1000-900 [ 0.145337] node /plugin-manager/fragment-p3310-c03 match with board >=3310-1000-B00 [ 0.146902] node /plugin-manager/fragment-e3326@0 match with board 3326-* [ 0.147987] node /plugin-manager/fragment-p3310-c00-camera match with board >=3310-1000-800 [ 0.149787] Adding domain adsp-pd to PM domain ape-pd [ 0.152204] NET: Registered protocol family 16 [ 0.153099] console [pstore-1] enabled [ 0.153112] pstore: Registered ramoops as persistent store backend [ 0.153126] ramoops: attached 0x200000@0x277080000, ecc: 0/0 [ 0.165345] cpuidle: using governor ladder [ 0.169808] cpuidle: using governor menu [ 0.170961] bpmp: waiting for handshake [ 0.170976] bpmp: handshake completed [ 0.171017] bpmp: synchronizing channels [ 0.171043] bpmp: channels synchronized [ 0.171055] bpmp: mail init ok [ 0.171419] vdso: 2 pages (1 code @ ffffffc0012bd000, 1 data @ ffffffc0012bc000) [ 0.171451] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.172426] atomic_pool_init():526: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.173839] tegra_powergate_init: DONE [ 0.173862] DTS File Name: /home/frank/Work/TX2/tegratx2_r28-3_org/source/public_sources/kernel_src/kernel/kernel-4.4/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts [ 0.173894] DTB Build time: Jun 5 2019 13:37:45 [ 0.174815] Tegra reboot handler registered. [ 0.175899] Registering Tegra186 clocks (this may take a while)...done [ 0.178033] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.178051] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.178065] arm-smmu 12000000.iommu: stage 1 translation [ 0.178078] arm-smmu 12000000.iommu: stage 2 translation [ 0.178091] arm-smmu 12000000.iommu: nested translation [ 0.178105] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.178125] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.178144] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.178159] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.178172] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.227177] arm-smmu 12000000.iommu: registered 67 master devices [ 0.232842] iommu: Adding device 3460000.sdhci to group 0 [ 0.233732] iommu: Adding device 3400000.sdhci to group 1 [ 0.237510] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.237943] iommu: Adding device 3160000.i2c to group 3 [ 0.238326] iommu: Adding device c240000.i2c to group 4 [ 0.238704] iommu: Adding device 3180000.i2c to group 5 [ 0.239087] iommu: Adding device 3190000.i2c to group 6 [ 0.239530] iommu: Adding device 31b0000.i2c to group 7 [ 0.239863] iommu: Adding device 31c0000.i2c to group 8 [ 0.240205] iommu: Adding device c250000.i2c to group 9 [ 0.240532] iommu: Adding device 31e0000.i2c to group 10 [ 0.242527] iommu: Adding device 3210000.spi to group 11 [ 0.242900] iommu: Adding device c260000.spi to group 12 [ 0.243218] iommu: Adding device 3240000.spi to group 13 [ 0.243994] iommu: Adding device 3100000.serial to group 14 [ 0.244314] iommu: Adding device 3110000.serial to group 15 [ 0.244634] iommu: Adding device c280000.serial to group 16 [ 0.244962] iommu: Adding device 3130000.serial to group 17 [ 0.246215] iommu: Adding device 2490000.ether_qos to group 18 [ 0.246837] iommu: Adding device b000000.rtcpu to group 19 [ 0.247325] iommu: Adding device c1a0000.aon to group 20 [ 0.248216] Wake73 for irq=42 [ 0.248524] iommu: Adding device smmu_test to group 21 [ 0.249035] mc: mapped MMIO address: 0xffffff8000560000 -> 0x2c10000 [ 0.249100] mc: mapped MMIO address: 0xffffff8000640000 -> 0x2c20000 [ 0.249141] mc: mapped MMIO address: 0xffffff8000660000 -> 0x2c30000 [ 0.249177] mc: mapped MMIO address: 0xffffff8000fa0000 -> 0x2c40000 [ 0.249230] mc: mapped MMIO address: 0xffffff8000fc0000 -> 0x2c50000 [ 0.249459] ecc-err: dram ecc disabled-MC_ECC_CONTROL:0x0000000c [ 0.250275] Wake76 for irq=199 [ 0.250301] Wake77 for irq=199 [ 0.250322] Wake78 for irq=199 [ 0.250343] Wake79 for irq=199 [ 0.250363] Wake80 for irq=199 [ 0.250383] Wake81 for irq=199 [ 0.250404] Wake82 for irq=199 [ 0.250590] iommu: Adding device 3530000.xhci to group 22 [ 0.250935] iommu: Adding device 3550000.xudc to group 23 [ 0.251718] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.252839] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.252879] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.252904] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.252928] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.253220] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.253260] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.253448] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.253508] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.253995] iommu: Adding device 13e10000.host1x to group 24 [ 0.254263] iommu: Adding device 13e10000.host1x:ctx0 to group 25 [ 0.254530] iommu: Adding device 13e10000.host1x:ctx1 to group 26 [ 0.254806] iommu: Adding device 13e10000.host1x:ctx2 to group 27 [ 0.255040] iommu: Adding device 13e10000.host1x:ctx3 to group 28 [ 0.255259] iommu: Adding device 13e10000.host1x:ctx4 to group 29 [ 0.255502] iommu: Adding device 13e10000.host1x:ctx5 to group 30 [ 0.255743] iommu: Adding device 13e10000.host1x:ctx6 to group 31 [ 0.255974] iommu: Adding device 13e10000.host1x:ctx7 to group 32 [ 0.256396] iommu: Adding device 150c0000.nvcsi to group 33 [ 0.256945] iommu: Adding device 15700000.vi to group 34 [ 0.257255] iommu: Adding device 15600000.isp to group 35 [ 0.257641] iommu: Adding device 15210000.nvdisplay to group 36 [ 0.257834] platform 15210000.nvdisplay: IOVA linear map 0x00000000969f0000(800000) [ 0.257876] platform 15210000.nvdisplay: IOVA linear map 0x00000000969ed000(3000) [ 0.258079] iommu: Adding device 15340000.vic to group 37 [ 0.258272] iommu: Adding device 154c0000.nvenc to group 38 [ 0.258522] iommu: Adding device 15480000.nvdec to group 39 [ 0.258826] iommu: Adding device 15380000.nvjpg to group 40 [ 0.259069] iommu: Adding device 15500000.tsec to group 41 [ 0.259254] iommu: Adding device 15100000.tsecb to group 42 [ 0.259936] iommu: Adding device 15810000.se to group 43 [ 0.260155] iommu: Adding device 15820000.se to group 44 [ 0.260341] iommu: Adding device 15830000.se to group 45 [ 0.260545] iommu: Adding device 15840000.se to group 46 [ 0.261062] iommu: Adding device 17000000.gp10b to group 47 [ 0.262405] tegra-reset 5000000.clock: registered 193 resets. [ 0.264445] iommu: Adding device d000000.bpmp to group 48 [ 0.264694] bpmp: ping status is 0 [ 0.264916] bpmp d000000.bpmp: firmware tag is 69fa4e41a01fc02a4db1adf71922a54c [ 0.265257] bpmp d000000.bpmp: probe ok [ 0.267907] iommu: Adding device 2600000.dma to group 49 [ 0.268747] GPIO line 459 (pcie-lane2-mux) hogged as output/low [ 0.268812] GPIO line 461 (cam0-rst) hogged as output/low [ 0.268887] GPIO line 456 (cam0-pwdn) hogged as output/low [ 0.268940] GPIO line 457 (cam1-rst) hogged as output/low [ 0.268991] GPIO line 426 (cam1-pwdn) hogged as output/low [ 0.269045] GPIO line 424 (wifi-enable) hogged as output/high [ 0.269102] GPIO line 445 (sdmmc-wake-input) hogged as input [ 0.269179] GPIO line 446 (sdmmc-wake-output) hogged as output/low [ 0.269285] gpiochip_add_data: registered GPIOs 320 to 511 on device: tegra-gpio [ 0.271129] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.271274] gpiochip_add_data: registered GPIOs 256 to 319 on device: tegra-gpio-aon [ 0.272135] iommu: Adding device 10003000.pcie-controller to group 50 [ 0.272417] iommu: Adding device sound to group 51 [ 0.274139] iommu: Adding device 3510000.hda to group 52 [ 0.275330] iommu: Adding device adsp_audio to group 53 [ 0.276823] iommu: Adding device 2993000.adsp to group 54 [ 0.286325] vdd-ac-bat: 5000 mV [ 0.288367] vdd-1v8-ap: 1800 mV [ 0.304933] SCSI subsystem initialized [ 0.305412] usbcore: registered new interface driver usbfs [ 0.305481] usbcore: registered new interface driver hub [ 0.305600] usbcore: registered new device driver usb [ 0.309474] GPIO line 241 (touch-rail-1) hogged as output/high [ 0.309926] GPIO line 242 (touch-rail-2) hogged as output/high [ 0.310035] gpiochip_add_data: registered GPIOs 240 to 255 on device: tca9539 [ 0.311430] GPIO line 228 (lcd-bias-en-rail) hogged as output/high [ 0.311536] gpiochip_add_data: registered GPIOs 224 to 239 on device: tca9539 [ 0.322529] media: Linux media interface: v0.10 [ 0.322638] Linux video capture interface: v2.00 [ 0.325677] pps_core: LinuxPPS API ver. 1 registered [ 0.325715] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.325779] PTP clock support registered [ 0.326824] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.326917] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.328475] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.330630] GPIO line 221 (spmic_gpio_input_5) hogged as input [ 0.330820] GPIO line 222 (spmic_gpio_input_6) hogged as input [ 0.330947] gpiochip_add_data: registered GPIOs 216 to 223 on device: max77620-gpio [ 0.338288] vddio-ddr: at 1125 mV [ 0.342122] avdd_dsi_csi: 1200 mV [ 0.346123] vdd-1v8: 1800 mV [ 0.350122] vdd-3v3-sys: 3300 mV [ 0.351233] spmic-ldo0: at 1800 mV [ 0.352061] spmic-ldo1: at 800 mV [ 0.354124] vddio-3v3: 3300 mV [ 0.354783] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.358126] vdd-rtc: at 800 mV [ 0.358934] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.362126] spmic-ldo6: at 1500 mV [ 0.365809] vdd-pex-1v00: 1000 mV [ 0.366395] dvdd-pex: 1000 mV [ 0.366658] max77620 4-003c: max77620 probe successful [ 0.366925] Advanced Linux Sound Architecture Driver Initialized. [ 0.367264] Bluetooth: Core ver 2.21 [ 0.367292] NET: Registered protocol family 31 [ 0.367304] Bluetooth: HCI device and connection manager initialized [ 0.367321] Bluetooth: HCI socket layer initialized [ 0.367335] Bluetooth: L2CAP socket layer initialized [ 0.367357] Bluetooth: SCO socket layer initialized [ 0.368046] en-vdd-sd: 3300 mV [ 0.368649] en-vdd-cam: 1800 mV [ 0.373803] vdd-hdmi: 5000 mV [ 0.373981] vdd-usb0-5v: 5000 mV [ 0.374151] vdd-usb1-5v: 5000 mV [ 0.377806] en-vdd-ts-1v8: 1800 mV [ 0.381804] en-vdd-ts-hv-3v3: 3300 mV [ 0.382318] en-vdd-disp-3v3: 3300 mV [ 0.382828] en-mdm-pwr-3v7: 3700 mV [ 0.383339] en-vdd-disp-1v8: 1800 mV [ 0.383854] en-vdd-cam-hv-2v8: 2800 mV [ 0.384375] en-vdd-cam-1v2: 1200 mV [ 0.384901] vdd-fan: 5000 mV [ 0.385010] vdd-3v3: 3300 mV [ 0.385733] dis-vdd-1v2: 1200 mV [ 0.385854] en-vdd-vcm-2v8: 2800 mV [ 0.386377] vdd-usb2-5v: 5000 mV [ 0.386500] vdd-sys-bl: 3300 mV [ 0.387023] en-vdd-sys: 1200 mV [ 0.390422] extcon-gpio-states external-connection:extcon@1: Cable state 1 [ 0.390850] clocksource: Switched to clocksource arch_sys_counter [ 0.409843] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.410111] nvmap: nvmap_override_cache_ops() set roc flush ops to replace cache ops by set/ways [ 0.410576] nvmap_page_pool_init: Total RAM pages: 2008271 [ 0.410594] nvmap_page_pool_init: nvmap page pool size: 251033 pages (980 MB) [ 0.410800] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.415319] Wake76 for irq=199 [ 0.415333] Wake77 for irq=199 [ 0.415345] Wake78 for irq=199 [ 0.415356] Wake79 for irq=199 [ 0.415366] Wake80 for irq=199 [ 0.415376] Wake81 for irq=199 [ 0.415386] Wake82 for irq=199 [ 0.416157] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.416354] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.416740] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.416819] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.416963] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.417105] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.417254] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.417551] isomgr_init(): iso emc max clk=1866000KHz [ 0.417563] isomgr_init(): max_iso_bw=26870400KB [ 0.417652] NET: Registered protocol family 2 [ 0.417954] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.418278] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.418969] TCP: Hash tables configured (established 65536 bind 65536) [ 0.419029] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.419161] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.419409] NET: Registered protocol family 1 [ 0.419619] RPC: Registered named UNIX socket transport module. [ 0.419634] RPC: Registered udp transport module. [ 0.419645] RPC: Registered tcp transport module. [ 0.419657] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.419776] Trying to unpack rootfs image as initramfs... [ 0.433969] host1x 13e10000.host1x: initialized [ 0.434855] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.437054] audit: initializing netlink subsys (disabled) [ 0.437087] audit: type=2000 audit(0.424:1): initialized [ 0.445288] io scheduler noop registered [ 0.445398] io scheduler cfq registered (default) [ 0.448385] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.449581] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 0.450652] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.451720] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.455178] tsec 15500000.tsec: initialized [ 0.456278] tsec 15100000.tsecb: initialized [ 0.458593] nvdec 15480000.nvdec: initialized [ 0.462262] falcon 15340000.vic: initialized [ 0.463254] falcon 154c0000.nvenc: initialized [ 0.464238] falcon 15380000.nvjpg: initialized [ 0.465025] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 0.465545] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 0.466059] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 0.466562] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 0.467109] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 0.467636] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 0.468170] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 0.468696] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 0.471436] DC OR NODE connected to /host1x/sor1 [ 0.471560] generic_infoframe_type: 0x87 [ 0.471573] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.471664] tegradc 15210000.nvdisplay: DT parsed successfully [ 0.471673] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 0.471677] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=1500000, max_bw=4687500 [ 0.471740] tegradc 15210000.nvdisplay: Display dc.ffffff8002320000 registered with id=0 [ 0.478932] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 0.478954] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 0.478971] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 0.479020] tegradc 15210000.nvdisplay: vblank syncpt # 7 for dc 1 [ 0.479036] tegradc 15210000.nvdisplay: vpulse3 syncpt # 8 for dc 1 [ 0.479176] tegra-adma 2930000.adma: Tegra ADMA driver register 10 channels [ 0.479925] tegradc 15210000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 0.481645] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 0.481994] kfuse 3830000.kfuse: initialized [ 0.482022] tegradc 15210000.nvdisplay: hdmi: no prod_list_hdmi_board, use default range [ 0.483439] tegradc 15210000.nvdisplay: probed [ 0.483712] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 0.484325] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.486306] console [ttyS0] disabled [ 0.486360] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 37, base_baud = 25500000) is a Tegra [ 2.669587] console [ttyS0] enabled [ 2.671606] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 2.672668] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 39, base_baud = 0) is a TEGRA_UART [ 2.672941] serial-tegra 3130000.serial: RX in PIO mode [ 2.673830] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 40, base_baud = 0) is a TEGRA_UART [ 2.683516] Console: switching to colour frame buffer device 240x67 [ 2.684941] brd: module loaded [ 2.689703] loop: module loaded [ 2.689961] nct1008_nct72 7-004c: find device tree node, parsing dt [ 2.689965] nct1008_nct72 7-004c: starting parse dt [ 2.690046] nct1008_nct72 7-004c: success parsing dt [ 2.690168] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 2.694716] gk20a 17000000.gp10b: failed to allocate secure buffer -12 [ 2.726952] tmp451: Enabled overheat logging at 104.00C [ 2.727114] nct1008_nct72 7-004c: nct1008_probe: initialized [ 2.729458] THERMAL EST: found 3 subdevs [ 2.729462] THERMAL EST num_resources: 0 [ 2.729465] [THERMAL EST subdev 0] [ 2.729470] [THERMAL EST subdev 1] [ 2.729473] [THERMAL EST subdev 2] [ 2.729772] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 2.729774] THERMAL EST: thz register success. [ 2.729905] THERMAL EST: end of probe, return err: 0 [ 2.729987] tegra_profiler: Branch: Dev [ 2.729989] tegra_profiler: Version: 1.121 [ 2.729991] tegra_profiler: Samples version: 42 [ 2.729993] tegra_profiler: IO version: 24 [ 2.730001] armv8_pmu: [0] arch: AA64 PmuV3 ARM CORTEX-A57, pmuver: 0x1 [ 2.730005] armv8_pmu: [1] arch: AA64 PmuV3 NVIDIA (Denver), pmuver: 0x1 [ 2.730009] armv8_pmu: [2] arch: AA64 PmuV3 NVIDIA (Denver), pmuver: 0x1 [ 2.730012] armv8_pmu: [3] arch: AA64 PmuV3 ARM CORTEX-A57, pmuver: 0x1 [ 2.730016] armv8_pmu: [4] arch: AA64 PmuV3 ARM CORTEX-A57, pmuver: 0x1 [ 2.730019] armv8_pmu: [5] arch: AA64 PmuV3 ARM CORTEX-A57, pmuver: 0x1 [ 2.730211] tegra_profiler: auth: init [ 2.734150] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.734161] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 2.735280] scsi host0: tegra_ahci [ 2.735708] scsi host1: tegra_ahci [ 2.735869] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 25 [ 2.735872] ata2: DUMMY [ 2.736873] spi-tegra114 3210000.spi: Static pin configuration used [ 2.737336] spi-tegra114 c260000.spi: Static pin configuration used [ 2.737756] spi-tegra114 3240000.spi: Static pin configuration used [ 2.738565] tun: Universal TUN/TAP device driver, 1.6 [ 2.738567] tun: (C) 1999-2004 Max Krasnyansky [ 2.738762] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.738764] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.738803] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 2.738805] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.739918] PPP generic driver version 2.4.2 [ 2.740046] PPP BSD Compression module registered [ 2.740053] PPP Deflate Compression module registered [ 2.740077] PPP MPPE Compression module registered [ 2.740088] NET: Registered protocol family 24 [ 2.740140] usbcore: registered new interface driver r8152 [ 2.740173] usbcore: registered new interface driver asix [ 2.740201] usbcore: registered new interface driver ax88179_178a [ 2.740230] usbcore: registered new interface driver cdc_ether [ 2.740265] usbcore: registered new interface driver smsc75xx [ 2.740290] usbcore: registered new interface driver net1080 [ 2.740316] usbcore: registered new interface driver cdc_subset [ 2.740342] usbcore: registered new interface driver zaurus [ 2.740390] usbcore: registered new interface driver cdc_ncm [ 2.740666] Wake76 for irq=199 [ 2.740669] Wake77 for irq=199 [ 2.740671] Wake78 for irq=199 [ 2.740673] Wake79 for irq=199 [ 2.740675] Wake80 for irq=199 [ 2.740677] Wake81 for irq=199 [ 2.740679] Wake82 for irq=199 [ 2.740740] tegra-xotg xotg: usb2 phy is not available yet [ 2.741480] usbcore: registered new interface driver cdc_acm [ 2.741483] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.741524] usbcore: registered new interface driver usb-storage [ 2.741582] usbcore: registered new interface driver usbserial [ 2.741608] usbcore: registered new interface driver ch341 [ 2.741628] usbserial: USB Serial support registered for ch341-uart [ 2.741653] usbcore: registered new interface driver cp210x [ 2.741670] usbserial: USB Serial support registered for cp210x [ 2.741696] usbcore: registered new interface driver ftdi_sio [ 2.741742] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.741767] usbcore: registered new interface driver option [ 2.741787] usbserial: USB Serial support registered for GSM modem (1-port) [ 2.741811] usbcore: registered new interface driver pl2303 [ 2.741828] usbserial: USB Serial support registered for pl2303 [ 2.742023] tegra-usb-cd usb_cd: otg phy is not available yet [ 2.743048] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b a5 c9 9d [ 2.743563] libphy: dwc_phy: probed [ 2.744320] tegra-xudc-new 3550000.xudc: usb2 phy is not available yet [ 2.807998] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 2.867136] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.869375] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.869393] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.869548] i2c /dev entries driver [ 2.870315] [OV5693]: probing v4l2 sensor. [ 3.054857] ata1: SATA link down (SStatus 0 SControl 300) [ 3.322339] tegradc 15210000.nvdisplay: fb registered [ 3.329064] PD DISP0 index2 UP [ 3.334231] PD DISP1 index3 UP [ 3.338763] PD DISP2 index4 UP [ 3.352398] Parent Clock set for DC plld2 [ 3.401412] tegradc 15210000.nvdisplay: hdmi: pclk:148351K, set prod-setting:prod_c_150M [ 3.547169] tegradc 15210000.nvdisplay: blank - normal [ 3.551661] tegradc 15210000.nvdisplay: blank - powerdown [ 3.610586] PD DISP2 index4 DOWN [ 3.611685] PD DISP1 index3 DOWN [ 3.612290] PD DISP0 index2 DOWN [ 3.644299] tegradc 15210000.nvdisplay: unblank [ 3.644389] PD DISP0 index2 UP [ 3.652721] PD DISP1 index3 UP [ 3.653297] PD DISP2 index4 UP [ 3.669160] Parent Clock set for DC plld2 [ 3.671670] tegradc 15210000.nvdisplay: hdmi: pclk:148500K, set prod-setting:prod_c_150M [ 3.675179] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 3.677124] FAN dev name: pwm-fan [ 3.677171] FAN:gpio request success. [ 3.677176] FAN: can't find tach_gpio [ 3.677198] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 3.677361] pwm_fan_driver pwm-fan: got pwm for fan [ 3.677365] pwm_fan_driver pwm-fan: tach period: 1000 [ 3.677663] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 3.677667] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 3.677670] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 3.677673] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 3.677676] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 3.677679] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 3.677682] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 3.677684] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 3.677688] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 3.677691] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 3.678461] device-mapper: uevent: version 1.0.3 [ 3.678647] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 3.679036] sdhci: Secure Digital Host Controller Interface driver [ 3.679037] sdhci: Copyright(c) Pierre Ossman [ 3.679041] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.679310] sdhci-tegra 3460000.sdhci: Parent select= pll_p rate=408000000 [ 3.679596] sdhci-tegra 3460000.sdhci: Parent select= pll_c4_out0 rate=196249804 [ 3.679832] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 3.714837] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.715043] sdhci-tegra 3440000.sdhci: Parent select= pll_p rate=408000000 [ 3.715255] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 3.750835] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.751075] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 3.751126] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 3.751206] sdhci-tegra 3400000.sdhci: Parent select= pll_p rate=408000000 [ 3.751230] sdhci-tegra 3400000.sdhci: wakeup init done, cd_irq: 256 [ 3.751451] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 3.752850] mmc0: MAN_BKOPS_EN bit is not set [ 3.761517] mmc0: Skipping tuning since strobe enabled [ 3.769840] mmc0: periodic cache flush enabled [ 3.769847] mmc0: new HS400 MMC card at address 0001 [ 3.770200] mmcblk0: mmc0:0001 032G34 29.1 GiB [ 3.770390] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB [ 3.770578] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB [ 3.770759] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB [ 3.772142] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 [ 3.794931] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 3.796633] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.796765] hidraw: raw HID events driver (C) Jiri Kosina [ 3.798214] usbcore: registered new interface driver usbhid [ 3.798215] usbhid: USB HID core driver [ 3.803361] Denver: backdoor interface is NOT available. [ 3.805172] coresight-tmc 8030000.etf: TMC initialized [ 3.806281] coresight-tmc 8050000.etr: TMC initialized [ 3.806643] coresight-tpiu 8060000.tpiu: TPIU initialized [ 3.807250] coresight-funnel 9010000.funnel_bccplex: FUNNEL initialized [ 3.807671] coresight-funnel 8010000.funnel_major: FUNNEL initialized [ 3.808065] coresight-funnel 8820000.funnel_minor: FUNNEL initialized [ 3.808493] coresight-replicator 8040000.replicator: REPLICATOR initialized [ 3.809095] coresight-etm4x 9840000.ptm: ETM 4.0 initialized [ 3.809626] coresight-etm4x 9940000.ptm: ETM 4.0 initialized [ 3.810150] coresight-etm4x 9a40000.ptm: ETM 4.0 initialized [ 3.810674] coresight-etm4x 9b40000.ptm: ETM 4.0 initialized [ 3.810699] Module initialized successfully [ 3.812769] mmc1: queuing unknown CIS tuple 0x80 (5 bytes) [ 3.813953] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xa0000000 [ 3.815254] tegra186-cam-rtcpu b000000.rtcpu: already unhalted [ 3.815992] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xa0110000-0xa011957f size=38272 [ 3.816370] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.816412] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00 [ 3.816453] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80 [ 3.816489] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480 [ 3.816524] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80 [ 3.816563] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180 [ 3.816597] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x384]=0x9180-0x9380 TX[1x384]=0x9380-0x9580 [ 3.816741] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (52) [ 3.816743] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 3.817798] tegra-ivc ivc-b000000.rtcpu:echo@0: ivc channel driver missing [ 3.817800] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: ivc channel driver missing [ 3.817803] tegra-ivc ivc-b000000.rtcpu:mods@32c0: ivc channel driver missing [ 3.817805] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivc channel driver missing [ 3.817807] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivc channel driver missing [ 3.817810] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: ivc channel driver missing [ 3.817812] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: ivc channel driver missing [ 3.817837] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=4 sha1=a8b1ecdd9615cd817a56df035be363fce3b0b88f [ 3.819284] random: nonblocking pool is initialized [ 3.823272] tegra-ivc-cdev ivc-b000000.rtcpu:echo@0: probing /dev/camchar-echo [ 3.824430] tegra-ivc-cdev ivc-b000000.rtcpu:dbg@7c00: probing /dev/camchar-dbg [ 3.824522] camchar: rtcpu character device driver loaded [ 3.828832] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.829067] register_ari_mca_banks: Registered MCA ROC:IOB [ 3.829158] register_ari_mca_banks: Registered MCA ROC:CCE [ 3.829491] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 3.829517] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 3.829541] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 3.829569] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 3.829592] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 3.829617] tegra18-bridge 2100000.axip2p: bridge probed OK [ 3.829640] tegra18-bridge 2110000.axip2p: bridge probed OK [ 3.829666] tegra18-bridge 2120000.axip2p: bridge probed OK [ 3.829689] tegra18-bridge 2130000.axip2p: bridge probed OK [ 3.829711] tegra18-bridge 2140000.axip2p: bridge probed OK [ 3.829734] tegra18-bridge 2150000.axip2p: bridge probed OK [ 3.829758] tegra18-bridge 2160000.axip2p: bridge probed OK [ 3.829781] tegra18-bridge 2170000.axip2p: bridge probed OK [ 3.829806] tegra18-bridge 2180000.axip2p: bridge probed OK [ 3.829829] tegra18-bridge 2190000.axip2p: bridge probed OK [ 3.829878] **** A57 ECC: Enabled [ 3.829880] tegra18_a57_serr_init: on CPU 5 a A57 Core [ 3.830020] parse_throttle_dt_data: Num cap clks = 4 [ 3.830022] parse_throttle_dt_data: clk=mcpu type=1 [ 3.830024] parse_throttle_dt_data: clk=bcpu type=2 [ 3.830030] parse_throttle_dt_data: clk=gpu type=4 [ 3.830032] parse_throttle_dt_data: clk=emc type=3 [ 3.830489] tegra_throttle_probe: probe successful. #cdevs=4 [ 3.830572] tegra18x_actmon d230000.actmon: in actmon_register()... [ 3.833000] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 3.833313] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 3.835362] tegra-se-nvhost 15810000.se: initialized [ 3.836573] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 3.837174] tegra-se-nvhost 15820000.se: initialized [ 3.838414] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 3.838985] tegra-se-nvhost 15830000.se: initialized [ 3.839905] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 3.840467] tegra-se-nvhost 15840000.se: initialized [ 3.841679] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 3.843939] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 3.847434] cpufreq: platform driver Initialization: pass [ 3.847582] tegra_cluster_clk e090000.cluster_clk_priv: in probe()... [ 3.847633] tegra_cluster_clk e090000.cluster_clk_priv: passed [ 3.847817] tegra186-padctl 3520000.pinctrl: padctl mmio start 0x0000000003520000 end 0x0000000003520fff [ 3.847822] tegra186-padctl 3520000.pinctrl: ao mmio start 0x0000000003540000 end 0x0000000003540fff [ 3.847858] tegra186-padctl 3520000.pinctrl: FUSE_SKU_USB_CALIB_0 0x2eb896 [ 3.847861] tegra186-padctl 3520000.pinctrl: FUSE_USB_CALIB_EXT_0 0x9 [ 3.849031] tegra186-padctl 3520000.pinctrl: using UTMI port 0 for otg [ 3.849517] tegra186-padctl 3520000.pinctrl: VBUS over-current detection enabled [ 3.850025] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supported [ 3.850359] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 3 not supported [ 3.851857] cpuidle: Initializing cpuidle driver init for Denver cluster [ 3.851966] cpuidle: Initializing cpuidle driver init for A57 cluster [ 3.852881] tachometer tegra-tachometer: Tachometer driver tegra-tachometer registered [ 3.852885] Tachometer driver initialized with pulse_per_rev: 2 and win_len: 2 [ 3.868076] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 3.868213] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 3.868537] OPE platform probe [ 3.868612] OPE platform probe successful [ 3.909405] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 3.909477] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 3.909547] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 3.909613] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 3.909682] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 3.909748] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 3.909819] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 3.909887] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 3.909954] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 3.910019] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 3.910087] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 3.910156] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 3.910221] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 3.910293] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 3.910360] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 3.910427] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 3.910495] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 3.910563] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 3.910629] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 3.910694] tegra-snd-t186ref-mobile-rt565x sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 3.932151] input: tegra-snd-t186ref-mobile-rt565x Headphone Jack as /devices/sound/sound/card1/input2 [ 3.933543] tegra-snd-t186ref-mobile-rt565x sound: codec-dai "dit-hifi" registered [ 3.933546] tegra-snd-t186ref-mobile-rt565x sound: This is a dummy codec [ 3.934042] GACT probability NOT on [ 3.934052] Mirror/redirect action on [ 3.934066] u32 classifier [ 3.934067] Actions configured [ 3.934117] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 3.934784] IPVS: Registered protocols () [ 3.934838] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 3.934906] IPVS: Creating netns size=1424 id=0 [ 3.934932] IPVS: ipvs loaded. [ 3.934937] IPVS: [rr] scheduler registered. [ 3.935008] ipip: IPv4 over IPv4 tunneling driver [ 3.935369] Initializing XFRM netlink socket [ 3.935686] NET: Registered protocol family 10 [ 3.936413] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.936472] NET: Registered protocol family 17 [ 3.936484] NET: Registered protocol family 15 [ 3.936508] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 3.936585] Bluetooth: RFCOMM socket layer initialized [ 3.936596] Bluetooth: RFCOMM ver 1.11 [ 3.936603] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.936607] Bluetooth: HIDP socket layer initialized [ 3.936612] 8021q: 802.1Q VLAN Support v1.8 [ 3.937234] Registered cp15_barrier emulation handler [ 3.937246] Registered setend emulation handler [ 3.939013] registered taskstats version 1 [ 3.942709] isp 15600000.isp: initialized [ 3.947151] nvcsi 150c0000.nvcsi: initialized [ 3.948260] Wake76 for irq=199 [ 3.948262] Wake77 for irq=199 [ 3.948262] Wake78 for irq=199 [ 3.948263] Wake79 for irq=199 [ 3.948264] Wake80 for irq=199 [ 3.948264] Wake81 for irq=199 [ 3.948265] Wake82 for irq=199 [ 3.948538] xhci-tegra 3530000.xhci: UTMI port 0 has OTG_CAP [ 3.948540] xhci-tegra 3530000.xhci: No USB3 port has OTG_CAP [ 3.971088] spi-tegra114 3210000.spi: Static pin configuration used [ 3.971229] xhci-tegra 3530000.xhci: Direct firmware load for tegra18x_xusb_firmware failed with error -2 [ 3.971231] xhci-tegra 3530000.xhci: Falling back to user helper [ 3.971679] spi-tegra114 c260000.spi: Static pin configuration used [ 3.972356] spi-tegra114 3240000.spi: Static pin configuration used [ 3.973023] tegra-xotg xotg: OTG rev:0200, ADP:0, SRP:1, HNP:1, RSP:0 [ 3.973057] tegra-xotg xotg: update_id_state: ID floating [ 3.973061] tegra-xotg xotg: update_vbus_state: VBUS detected [ 3.973075] tegra-xotg xotg: Nvidia XUSB OTG Controller [ 3.974739] tegra-xotg xotg: otg: gadget gadget registered [ 3.974741] tegra-xotg xotg: set gadget otg_caps from OTG controller [ 3.974743] tegra-xotg xotg: otg: host not registered yet [ 3.974744] tegra-xotg xotg: otg: start OTG finite state machine [ 3.974781] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.975288] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.976406] input: gpio-keys as /devices/gpio-keys/input/input3 [ 4.010929] tegra_rtc c2a0000.rtc: setting system clock to 2019-06-05 05:51:50 UTC (1559713910) [ 4.011940] mmc1 tuning done saved tap delay=63 [ 4.011943] mmc1: hw tuning done ... [ 4.011949] mmc1: tuning_window[0]: 0xfffffffe [ 4.011954] mmc1: tuning_window[1]: 0xfffff0ff [ 4.011960] mmc1: tuning_window[2]: 0xff8fffff [ 4.011965] mmc1: tuning_window[3]: 0x3fffffff [ 4.011969] mmc1: tuning_window[4]: 0x0 [ 4.011974] mmc1: tuning_window[5]: 0x0 [ 4.011978] mmc1: tuning_window[6]: 0x0 [ 4.011982] mmc1: tuning_window[7]: 0x0 [ 4.017778] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 4.017822] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 4.040779] bpmp: mounted debugfs mirror [ 4.041298] [dram-timers] DRAM derating cdev registered. [ 4.045616] spmic-ldo0: disabling [ 4.045788] spmic-ldo1: disabling [ 4.045931] en-vdd-sd: disabling [ 4.045932] en-vdd-cam: disabling [ 4.045934] vdd-usb0-5v: disabling [ 4.045935] vdd-usb1-5v: disabling [ 4.045938] en-vdd-disp-3v3: disabling [ 4.045939] en-mdm-pwr-3v7: disabling [ 4.045941] en-vdd-disp-1v8: disabling [ 4.045942] en-vdd-cam-hv-2v8: disabling [ 4.045943] en-vdd-cam-1v2: disabling [ 4.045945] vdd-fan: disabling [ 4.045946] vdd-3v3: disabling [ 4.045948] en-vdd-vcm-2v8: disabling [ 4.045950] vdd-usb2-5v: disabling [ 4.045951] vdd-sys-bl: disabling [ 4.045953] en-vdd-sys: disabling [ 4.052282] ALSA device list: [ 4.052284] #0: tegra-hda at 0x3518000 irq 400 [ 4.052285] #1: tegra-snd-t186ref-mobile-rt565x [ 4.054386] tegra-vi4 15700000.vi: initialized [ 4.055910] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi-2 bound [ 4.055914] tegra-vi4 15700000.vi: subdev ov5693 2-0036 bound [ 4.130883] tegra-usb-cd usb_cd: notification status (0x0, 0x1) [ 4.130887] tegra-usb-cd usb_cd: set current 0ma [ 4.130894] tegra-xudc-new 3550000.xudc: exiting ELPG [ 4.131872] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 4.131874] tegra-xudc-new 3550000.xudc: device mode on [ 6.563049] tegradc 15210000.nvdisplay: hdmi: plugged [ 6.566984] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.566999] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 6.567918] devtmpfs: mounted [ 6.568214] Freeing unused kernel memory: 1168K [ 6.568239] Freeing alternatives memory: 100K [ 6.573224] btb inv war enabled [ 6.625565] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 6.645656] systemd[1]: Detected architecture arm64. [ 6.661582] systemd[1]: Set hostname to . [ 6.776954] systemd[1]: Created slice System Slice. [ 6.785444] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.798280] systemd[1]: Listening on udev Control Socket. [ 6.807144] systemd[1]: Reached target Encrypted Volumes. [ 6.816468] systemd[1]: Created slice User and Session Slice. [ 6.825752] systemd[1]: Reached target Slices. [ 6.833674] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.843180] systemd[1]: Listening on Journal Audit Socket. [ 6.852790] systemd[1]: Created slice system-getty.slice. [ 6.863401] systemd[1]: Reached target User and Group Name Lookups. [ 6.873074] systemd[1]: Listening on LVM2 poll daemon socket. [ 6.882014] systemd[1]: Listening on LVM2 metadata daemon socket. [ 6.892433] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 6.901787] systemd[1]: Listening on Syslog Socket. [ 6.909769] systemd[1]: Reached target Swap. [ 6.919511] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 6.929334] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.939597] systemd[1]: Listening on udev Kernel Socket. [ 6.948286] systemd[1]: Listening on Journal Socket. [ 6.958731] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.971240] systemd[1]: Starting Journal Service... [ 6.978244] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 6.989478] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 7.004740] systemd[1]: Mounting RPC Pipe File System... [ 7.016138] systemd[1]: Mounting POSIX Message Queue File System... [ 7.028494] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 7.045086] systemd[1]: Mounting Debug File System... [ 7.060933] systemd[1]: Starting Load Kernel Modules... [ 7.070518] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.084116] systemd[1]: Started Braille Device Support. [ 7.098684] systemd[1]: Mounted RPC Pipe File System. [ 7.108160] systemd[1]: Mounted POSIX Message Queue File System. [ 7.118172] systemd[1]: Mounted Debug File System. [ 7.129125] systemd[1]: Started Journal Service. [ 7.345393] systemd-journald[247]: Received request to flush runtime journal from PID 1 [ 7.494441] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration [ 7.510122] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 7.520508] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes [ 7.529027] xhci-tegra 3530000.xhci: cannot find firmware....retry after 1 second [ 7.534331] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes [ 7.700017] dhd_module_init in [ 7.706283] tegra_net_perf_init: cannot get wifi sclk [ 7.714179] found wifi platform device bcmdhd_wlan [ 7.729561] wifi_platform_get_country_code_map: could not get country_code_map [ 7.740241] wifi_plat_dev_drv_probe:platform country code map is not available [ 7.749999] Power-up adapter 'DHD generic adapter' [ 7.757501] wifi_platform_set_power = 1 [ 7.956886] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 7.966838] wifi_platform_bus_enumerate device present 1 [ 7.992802] wifi_platform_bus_enumerate device present 0 [ 8.000890] F1 signature read @0x18000000=0x17214354 [ 8.006076] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 8.006560] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 8.006618] wifi_platform_get_mac_addr [ 8.013894] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211 [ 8.182606] wl_create_event_handler(): thread:wl_event_handler:240 started [ 8.182615] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xffffffc1e0301a70 [ 8.201266] dhd_attach(): thread:dhd_watchdog_thread:242 started [ 8.209433] dhd_attach(): thread:dhd_dpc:244 started [ 8.216584] dhd_attach(): thread:dhd_rxf:246 started [ 8.223502] dhd_deferred_work_init: work queue initialized [ 8.235072] Dongle Host Driver, version 1.201.82 (r) [ 8.235072] Compiled in drivers/net/wireless/bcmdhd on Mar 25 2019 at 10:32:37 [ 8.251681] tegra_sysfs_register [ 8.256763] Register interface [wlan0] MAC: 00:04:4b:a5:c9:9b [ 8.256763] [ 8.266669] dhd_prot_ioctl : bus is down. we have nothing to do [ 8.274552] sdhci-tegra 3440000.sdhci: Tuning already done, restoring the best tap value : 63 [ 8.285497] wifi_platform_set_power = 0 [ 8.430859] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 8.650674] xhci-tegra 3530000.xhci: Firmware timestamp: 2017-12-07 10:50:08 UTC, Version: 55.09 release [ 8.664410] xhci-tegra 3530000.xhci: xHCI Host Controller [ 8.672019] xhci-tegra 3530000.xhci: new USB bus registered, assigned bus number 1 [ 8.682502] xhci-tegra 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00010810 [ 8.682526] xhci-tegra 3530000.xhci: irq 59, io mem 0x03530000 [ 8.682620] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.682622] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.682625] usb usb1: Product: xHCI Host Controller [ 8.682626] usb usb1: Manufacturer: Linux 4.4.159-tegra xhci-hcd [ 8.682628] usb usb1: SerialNumber: 3530000.xhci [ 8.682989] hub 1-0:1.0: USB hub found [ 8.683010] hub 1-0:1.0: 4 ports detected [ 8.686881] xhci-tegra 3530000.xhci: xHCI Host Controller [ 8.686889] xhci-tegra 3530000.xhci: new USB bus registered, assigned bus number 2 [ 8.686991] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 8.686994] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.686996] usb usb2: Product: xHCI Host Controller [ 8.686998] usb usb2: Manufacturer: Linux 4.4.159-tegra xhci-hcd [ 8.686999] usb usb2: SerialNumber: 3530000.xhci [ 8.687254] hub 2-0:1.0: USB hub found [ 8.687272] hub 2-0:1.0: 3 ports detected [ 8.687632] tegra-xotg xotg: otg: host 3530000.xhci registered [ 8.719942] using random self ethernet address [ 8.719946] using random host ethernet address [ 8.730732] Mass Storage Function, version: 2009/09/11 [ 8.730737] LUN: removable file: (no medium) [ 8.735225] using random self ethernet address [ 8.735230] using random host ethernet address [ 8.740087] usb0: HOST MAC ce:b8:54:18:cb:0a [ 8.740132] usb0: MAC 86:c6:59:62:f8:de [ 8.740453] usb1: HOST MAC 0a:fb:73:1f:7a:29 [ 8.740468] usb1: MAC b2:be:82:29:2d:23 [ 8.740488] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 8.842917] tegra-pcie 10003000.pcie-controller: link 0 down, retrying [ 8.844933] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring [ 8.845226] tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00 [ 8.845229] pci_bus 0000:00: root bus resource [mem 0x50100000-0x57ffffff] [ 8.845232] pci_bus 0000:00: root bus resource [mem 0x58000000-0x7fffffff pref] [ 8.845234] pci_bus 0000:00: root bus resource [bus 00-ff] [ 8.845236] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 8.845261] pci 0000:00:03.0: [10de:10e6] type 01 class 0x060400 [ 8.845353] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 8.845501] iommu: Adding device 0000:00:03.0 to group 55 [ 8.845566] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 8.845711] pci 0000:01:00.0: [8086:3165] type 00 class 0x028000 [ 8.845780] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 8.845950] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 8.846104] iommu: Adding device 0000:01:00.0 to group 56 [ 8.846159] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 8.846189] pci 0000:00:03.0: BAR 8: assigned [mem 0x50100000-0x501fffff] [ 8.846192] pci 0000:01:00.0: BAR 0: assigned [mem 0x50100000-0x50101fff 64bit] [ 8.846213] pci 0000:00:03.0: PCI bridge to [bus 01] [ 8.846219] pci 0000:00:03.0: bridge window [mem 0x50100000-0x501fffff] [ 8.846282] pcieport 0000:00:03.0: enabling device (0000 -> 0002) [ 8.846362] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 8.846364] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 8.846370] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded [ 8.846443] aer 0000:00:03.0:pcie02: service driver aer loaded [ 8.884378] device usb0 entered promiscuous mode [ 8.888229] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 8.891178] device usb1 entered promiscuous mode [ 8.893995] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready [ 8.894000] l4tbr0: port 2(usb1) entered forwarding state [ 8.894009] l4tbr0: port 2(usb1) entered forwarding state [ 8.937038] android_work: did not send uevent (0 0 (null)) [ 9.001893] android_work: sent uevent USB_STATE=CONNECTED [ 9.006841] usb 1-2: new high-speed USB device number 2 using xhci-tegra [ 9.057111] android_work: sent uevent USB_STATE=DISCONNECTED [ 9.139579] usb 1-2: New USB device found, idVendor=14cd, idProduct=8601 [ 9.139582] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 9.139584] usb 1-2: Product: USB 2.0 Hub [ 9.139586] usb 1-2: Manufacturer: USB Device [ 9.140102] xhci-tegra 3530000.xhci: tegra_xhci_mbox_work mailbox command 6 [ 9.140346] hub 1-2:1.0: USB hub found [ 9.140460] hub 1-2:1.0: 4 ports detected [ 9.141804] android_work: sent uevent USB_STATE=CONNECTED [ 9.143937] configfs-gadget gadget: high-speed config #1: c [ 9.143962] tegra-xudc-new 3550000.xudc: ep 5 (type: 3, dir: in) enabled [ 9.143977] tegra-xudc-new 3550000.xudc: ep 3 (type: 2, dir: in) enabled [ 9.143993] tegra-xudc-new 3550000.xudc: ep 2 (type: 2, dir: out) enabled [ 9.144057] tegra-xudc-new 3550000.xudc: ep 9 (type: 3, dir: in) enabled [ 9.144072] tegra-xudc-new 3550000.xudc: ep 7 (type: 2, dir: in) enabled [ 9.144087] tegra-xudc-new 3550000.xudc: ep 4 (type: 2, dir: out) enabled [ 9.144113] tegra-xudc-new 3550000.xudc: ep 15 (type: 3, dir: in) enabled [ 9.144130] tegra-xudc-new 3550000.xudc: ep 11 (type: 2, dir: in) enabled [ 9.144149] tegra-xudc-new 3550000.xudc: ep 6 (type: 2, dir: out) enabled [ 9.144189] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 9.144263] l4tbr0: port 1(usb0) entered forwarding state [ 9.144297] l4tbr0: port 1(usb0) entered forwarding state [ 9.144365] android_work: sent uevent USB_STATE=CONFIGURED [ 9.144415] tegra-xudc-new 3550000.xudc: setup request failed: -95 [ 9.150220] tegra-xudc-new 3550000.xudc: ep 13 (type: 2, dir: in) enabled [ 9.150235] tegra-xudc-new 3550000.xudc: ep 8 (type: 2, dir: out) enabled [ 9.150296] IPv6: ADDRCONF(NETDEV_CHANGE): usb1: link becomes ready [ 9.250833] usb 1-3: new full-speed USB device number 3 using xhci-tegra [ 9.381153] usb 1-3: feature bit otg_vbus_off set [ 9.381158] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a [ 9.381161] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 9.381828] xhci-tegra 3530000.xhci: tegra_xhci_mbox_work mailbox command 6 [ 9.450858] usb 1-2.1: new low-speed USB device number 4 using xhci-tegra [ 9.555220] usb 1-2.1: New USB device found, idVendor=1bcf, idProduct=0005 [ 9.564985] usb 1-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 9.574226] usb 1-2.1: Product: USB Optical Mouse [ 9.581102] usb 1-2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 9.599550] input: USB Optical Mouse as /devices/3530000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/0003:1BCF:0005.0001/input/input4 [ 9.600079] hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-3530000.xhci-2.1/input0 [ 9.682847] usb 1-2.3: new low-speed USB device number 5 using xhci-tegra [ 9.784031] usb 1-2.3: New USB device found, idVendor=1a2c, idProduct=0e24 [ 9.787098] IPVS: Creating netns size=1424 id=1 [ 9.799967] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.799973] usb 1-2.3: Product: USB Keyboard [ 9.799975] usb 1-2.3: Manufacturer: SEM [ 9.800545] usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 9.800564] usb 1-2.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 9.803740] input: SEM USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.3/1-2.3:1.0/0003:1A2C:0E24.0002/input/input5 [ 9.813384] gk20a 17000000.gp10b: railgate is disabled. [ 9.859215] hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-3530000.xhci-2.3/input0 [ 9.862455] input: SEM USB Keyboard as /devices/3530000.xhci/usb1/1-2/1-2.3/1-2.3:1.1/0003:1A2C:0E24.0003/input/input6 [ 9.915068] hid-generic 0003:1A2C:0E24.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-3530000.xhci-2.3/input1 [ 9.958456] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.969464] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.987959] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.997932] [ 9.997932] Dongle Host Driver, version 1.201.82 (r) [ 9.997932] Compiled in drivers/net/wireless/bcmdhd on Mar 25 2019 at 10:32:37 [ 10.021587] wl_android_wifi_on in [ 10.021589] wifi_platform_set_power = 1 [ 10.032336] usbcore: registered new interface driver btusb [ 10.051171] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 10.060350] bluetooth hci0: Direct firmware load for intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq failed with error -2 [ 10.073334] bluetooth hci0: Falling back to user helper [ 10.293674] mmc1: queuing unknown CIS tuple 0x80 (5 bytes) [ 10.334633] xhci-tegra 3530000.xhci: tegra_xhci_mbox_work mailbox command 5 [ 10.341635] xhci-tegra 3530000.xhci: tegra_xhci_mbox_work ignore firmware MBOX_CMD_DEC_SSPI_CLOCK request [ 10.361828] tegradc 15210000.nvdisplay: blank - powerdown [ 10.362300] sdhci-tegra 3440000.sdhci: Tuning already done, restoring the best tap value : 63 [ 10.362681] F1 signature read @0x18000000=0x17214354 [ 10.365999] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2 [ 10.366469] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000 [ 10.417777] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. [ 10.427572] PD DISP2 index4 DOWN [ 10.427770] PD DISP1 index3 DOWN [ 10.427847] PD DISP0 index2 DOWN [ 10.478015] tegradc 15210000.nvdisplay: unblank [ 10.478028] PD DISP0 index2 UP [ 10.479642] PD DISP1 index3 UP [ 10.479733] PD DISP2 index4 UP [ 10.479773] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us) [ 10.480010] Enabling wake69 [ 10.480626] wifi_platform_get_mac_addr [ 10.481185] Parent Clock set for DC plld2 [ 10.482361] Firmware up: op_mode=0x0005, MAC=00:04:4b:a5:c9:9b [ 10.483153] tegradc 15210000.nvdisplay: hdmi: pclk:148500K, set prod-setting:prod_c_150M [ 10.489073] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23 [ 10.493557] Firmware version = wl0: May 23 2018 16:37:00 version 7.35.349.47 (r690136 CY) FWID 01-5a659ebd [ 10.495818] dhd_interworking_enable: failed to set WNM info, ret=-23 [ 10.496008] tegra_sysfs_on [ 10.525733] cfg80211: World regulatory domain updated: [ 10.525740] cfg80211: DFS Master region: unset [ 10.525741] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 10.525748] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.525752] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.525755] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 10.525759] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 10.525764] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 10.525768] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 10.525771] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 10.525774] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 11.010637] Bridge firewalling registered [ 11.128769] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.665840] tegradc 15210000.nvdisplay: unblank [ 11.735660] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 11.827471] CPU1: shutdown [ 11.830213] psci: CPU1 killed. [ 11.857195] CPU2: shutdown [ 11.860045] psci: CPU2 killed. [ 12.014756] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : P2P interface registered [ 12.035078] WLC_E_IF: NO_IF set, event Ignored Ubuntu 16.04 LTS jetson-0422018064851 ttyS0 jetson-0422018064851 login: nvidia (automatic login) Last login: Wed Jun 5 05:46:09 UTC 2019 on ttyS0 Welcome to Ubuntu 16.04 LTS (GNU/Linux 4.4.159-tegra aarch64) * Documentation: https://help.ubuntu.com/ 668 packages can be updated. 360 updates are security updates. nvidia@jetson-0422018064851:~$ [ 13.320114] fuse init (API version 7.23) [ 15.833323] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.838683] Bluetooth: BNEP socket layer initialized [ 15.959467] IPVS: Creating netns size=1424 id=2 [ 16.003475] tegradc 15210000.nvdisplay: unblank [ 17.223947] IPVS: Creating netns size=1424 id=3 [ 23.914866] l4tbr0: port 2(usb1) entered forwarding state [ 24.170847] l4tbr0: port 1(usb0) entered forwarding state