[0000.116] C> I2C command failed [0000.119] C> block index = (4) and rail_id = (1) [0000.124] C> Addr: Reg = [0xe8:0x07]: 336166925 [0000.128] C> I2C command failed [0000.131] C> block index = (5) and rail_id = (1) [0000.136] C> Addr: Reg = [0xe8:0x07]: 336166925 [0000.237] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-7d3edb9d) [0000.246] I> bit @ 0xd480000 [0000.249] I> Boot-device: eMMC [0000.256] I> sdmmc bdev is already initialized [0000.261] I> pmic: reset reason (nverc) : 0x44 [0000.292] I> Found 18 partitions in SDMMC_BOOT (instance 3) [0000.311] I> Found 32 partitions in SDMMC_USER (instance 3) [0000.317] W> No valid slot number is found in scratch register [0000.323] W> Return default slot: _a [0000.326] I> A/B: bin_type (16) slot 0 [0000.330] I> Loading partition bpmp-fw at 0xd7800000 [0000.335] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.340] I> Addr: 0xd7800000, start-block: 29417480, num_blocks: 1 [0000.365] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.370] W> No valid slot number is found in scratch register [0000.376] W> Return default slot: _a [0000.380] I> A/B: bin_type (17) slot 0 [0000.383] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.388] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.394] I> Addr: 0xd79f0000, start-block: 29419896, num_blocks: 1 [0000.415] I> Binary(17) of size 314896 is loaded @ 0xd79b3000 [0000.537] I> Loading SCE-FW ... [0000.540] W> No valid slot number is found in scratch register [0000.546] W> Return default slot: _a [0000.549] I> A/B: bin_type (12) slot 0 [0000.553] I> Loading partition sce-fw at 0xd7300000 [0000.558] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.563] I> Addr: 0xd7300000, start-block: 29423992, num_blocks: 1 [0000.582] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.588] I> Init SCE [0000.590] I> Loading APE-FW ... [0000.593] W> No valid slot number is found in scratch register [0000.599] W> Return default slot: _a [0000.602] I> A/B: bin_type (11) slot 0 [0000.606] I> Loading partition adsp-fw at 0xd7400000 [0000.611] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.616] I> Addr: 0xd7400000, start-block: 29401096, num_blocks: 1 [0000.635] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.641] I> Copy BTCM section [0000.644] W> No valid slot number is found in scratch register [0000.650] W> Return default slot: _a [0000.653] I> A/B: bin_type (13) slot 0 [0000.657] I> Loading partition cpu-bootloader at 0x96000000 [0000.662] I> Reading two headers - addr:0x96000000 blocks:1 [0000.668] I> Addr: 0x96000000, start-block: 29380616, num_blocks: 1 [0000.688] I> Binary(13) of size 283728 is loaded @ 0x96000000 [0000.694] W> No valid slot number is found in scratch register [0000.700] W> Return default slot: _a [0000.703] I> A/B: bin_type (20) slot 0 [0000.707] I> Loading partition bootloader-dtb at 0x8520f400 [0000.712] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.718] I> Addr: 0x8520f400, start-block: 29382664, num_blocks: 1 [0000.740] I> Binary(20) of size 363968 is loaded @ 0x8520f400 [0000.746] W> No valid slot number is found in scratch register [0000.751] W> Return default slot: _a [0000.755] I> A/B: bin_type (14) slot 0 [0000.758] I> Loading partition secure-os at 0x8530f600 [0000.763] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.769] I> Addr: 0x8530f600, start-block: 29384712, num_blocks: 1 [0000.790] I> Binary(14) of size 312752 is loaded @ 0x8530f600 [0000.797] I> TOS boot-params @ 0x85000000 [0000.801] I> TOS params prepared [0000.804] I> Loading EKS ... [0000.807] I> A/B: bin_type (15) slot 0 [0000.811] I> Loading partition eks at 0x8590f800 [0000.815] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.821] I> Addr: 0x8590f800, start-block: 29397000, num_blocks: 1 [0000.839] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.845] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.850] I> Copied encrypted keys [0000.854] I> boot profiler @ 0x175844000 [0000.857] I> boot profiler for TOS @ 0x175844000 [0000.862] I> Unhalting SCE [0000.865] I> Primary Memory Start:80000000 Size:70000000 [0000.870] I> Extended Memory Start:f0110000 Size:856f0000 [0000.877] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):23b153a63 NOTICE: BL31: Built : 22:43:09, Dec 9 2019 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! keystore-demo: 141: Hello world from keystore-demo app keystore-demo: 207: main: EKB contents match expected value exit called, thread 0xffffffffea87ad58, name trusty_app_2_7d18fc60-e9fc-11e8 platform_bootstrap_epilog: trusty bootstrap complete [0001.183] I> Welcome to Cboot [0001.185] I> Cboot Version: t186-c3c778fb [0001.189] I> CPU-BL Params @ 0x175800000 [0001.193] I> 0) Base:0x00000000 Size:0x00000000 [0001.197] I> 1) Base:0x177f00000 Size:0x00100000 [0001.202] I> 2) Base:0x177e00000 Size:0x00100000 [0001.206] I> 3) Base:0x177d00000 Size:0x00100000 [0001.211] I> 4) Base:0x177c00000 Size:0x00100000 [0001.215] I> 5) Base:0x177b00000 Size:0x00100000 [0001.220] I> 6) Base:0x177800000 Size:0x00200000 [0001.225] I> 7) Base:0x177400000 Size:0x00400000 [0001.229] I> 8) Base:0x177a00000 Size:0x00100000 [0001.234] I> 9) Base:0x177300000 Size:0x00100000 [0001.238] I> 10) Base:0x176800000 Size:0x00800000 [0001.243] I> 11) Base:0x30000000 Size:0x00040000 [0001.247] I> 12) Base:0xf0000000 Size:0x00100000 [0001.251] I> 13) Base:0x30040000 Size:0x00001000 [0001.256] I> 14) Base:0x30048000 Size:0x00001000 [0001.260] I> 15) Base:0x30049000 Size:0x00001000 [0001.265] I> 16) Base:0x3004a000 Size:0x00001000 [0001.269] I> 17) Base:0x3004b000 Size:0x00001000 [0001.274] I> 18) Base:0x3004c000 Size:0x00001000 [0001.278] I> 19) Base:0x3004d000 Size:0x00001000 [0001.282] I> 20) Base:0x3004e000 Size:0x00001000 [0001.287] I> 21) Base:0x3004f000 Size:0x00001000 [0001.291] I> 22) Base:0x00000000 Size:0x00000000 [0001.296] I> 23) Base:0xf0100000 Size:0x00010000 [0001.300] I> 24) Base:0x00000000 Size:0x00000000 [0001.305] I> 25) Base:0x00000000 Size:0x00000000 [0001.309] I> 26) Base:0x00000000 Size:0x00000000 [0001.313] I> 27) Base:0x00000000 Size:0x00000000 [0001.318] I> 28) Base:0x84400000 Size:0x00400000 [0001.322] I> 29) Base:0x30000000 Size:0x00010000 [0001.327] I> 30) Base:0x178000000 Size:0x08000000 [0001.331] I> 31) Base:0x00000000 Size:0x00000000 [0001.336] I> 32) Base:0x176000000 Size:0x00600000 [0001.340] I> 33) Base:0x80000000 Size:0x70000000 [0001.345] I> 34) Base:0xf0110000 Size:0x856f0000 [0001.349] I> 35) Base:0x00000000 Size:0x00000000 [0001.354] I> 36) Base:0x00000000 Size:0x00000000 [0001.358] I> 37) Base:0x1772e0000 Size:0x00020000 [0001.362] I> 38) Base:0x84000000 Size:0x00400000 [0001.367] I> 39) Base:0x96000000 Size:0x02000000 [0001.371] I> 40) Base:0x85000000 Size:0x01200000 [0001.376] I> 41) Base:0x175800000 Size:0x00500000 [0001.380] I> 42) Base:0x00000000 Size:0x00000000 [0001.385] I> 43) Base:0x00000000 Size:0x00000000 [0001.389] GIC-SPI Target CPU: 4 [0001.392] Interrupts Init done [0001.396] calling constructors [0001.399] initializing heap [0001.401] initializing threads [0001.405] initializing timers [0001.408] creating bootstrap completion thread [0001.413] top of bootstrap2() [0001.416] CPU: ARM Cortex A57 [0001.419] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.424] initializing platform [0001.427] I> Bl_dtb @0x8520f400 [0001.430] I> gpio framework initialized [0001.437] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.447] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.454] I> GPIO framework and drivers are initialized. [0001.459] I> Boot-device: eMMC [0001.467] I> sdmmc bdev is already initialized [0001.497] I> Found 18 partitions in SDMMC_BOOT (instance 3) [0001.515] I> Found 32 partitions in SDMMC_USER (instance 3) [0001.520] W> opt-in fuse is not set, skip fuse_burning [0001.525] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.531] W> No valid slot number is found in scratch register [0001.536] W> Return default slot: _a [0001.540] I> A/B: bin_type (21) slot 0 [0001.543] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.561] I> Kernel_dtb @0x80000000 [0001.564] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.572] E> I2C: slave not found in slaves. [0001.576] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.584] E> I2C_DEV: Failed to send register address 0x00000004. [0001.590] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.599] E> tca9539_device_init: failed to write polar reg [0001.604] E> tegrabl_tca9539_init: failed to init device! [0001.610] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.616] E> I2C: slave not found in slaves. [0001.620] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.628] E> I2C_DEV: Failed to send register address 0x00000004. [0001.634] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0001.643] E> tca9539_device_init: failed to write polar reg [0001.649] E> tegrabl_tca9539_init: failed to init device! [0001.657] I> fixed regulator driver initialized [0001.690] I> register 'maxim' power off handle [0001.696] I> virtual i2c enabled [0001.699] I> registered 'maxim,max77620' pmic [0001.703] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.716] I> Find /i2c@c250000's alias i2c7 [0001.720] I> Reading eeprom i2c=7 address=0x50 [0001.750] I> Device at /i2c@c250000:0x50 [0001.753] I> Reading eeprom i2c=7 address=0x57 [0001.758] E> I2C: slave not found in slaves. [0001.762] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.770] E> I2C_DEV: Failed to send register address 0x00000000. [0001.776] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0001.785] E> eeprom: Failed to read I2C slave device [0001.790] I> Eeprom read failed 0x3526070d [0001.794] I> Find /i2c@c240000's alias i2c1 [0001.798] I> Reading eeprom i2c=1 address=0x51 [0001.804] E> I2C: slave not found in slaves. [0001.808] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.815] E> I2C_DEV: Failed to send register address 0x00000000. [0001.821] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.831] E> eeprom: Retry to read I2C slave device. [0001.836] E> I2C: slave not found in slaves. [0001.840] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.847] E> I2C_DEV: Failed to send register address 0x00000000. [0001.853] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.863] E> eeprom: Failed to read I2C slave device [0001.868] I> Eeprom read failed 0x3526070d [0001.872] I> Find /i2c@3160000's alias i2c0 [0001.876] I> Reading eeprom i2c=0 address=0x50 [0001.880] E> I2C: slave not found in slaves. [0001.885] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.892] E> I2C_DEV: Failed to send register address 0x00000000. [0001.898] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0001.908] E> eeprom: Failed to read I2C slave device [0001.912] I> Eeprom read failed 0x3526070d [0001.917] I> Find /i2c@3180000's alias i2c2 [0001.921] I> Reading eeprom i2c=2 address=0x54 [0001.925] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.930] C> GPIO driver for chip_id 0x2 could not be found [0001.936] E> cam_eeprom_read: Can't get gpio driver [0001.940] I> Eeprom read failed 0x4d4d000d [0001.944] I> Reading eeprom i2c=2 address=0x57 [0001.948] I> Enabling gpio chip_id = 2, gpio pin = 9 [0001.953] C> GPIO driver for chip_id 0x2 could not be found [0001.959] E> cam_eeprom_read: Can't get gpio driver [0001.963] I> Eeprom read failed 0x4d4d000d [0001.967] I> create_pm_ids: id: 3489-0888-300-H, len: 15 [0001.972] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.007] I> enabling 'vdd-hdmi' regulator [0002.011] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.020] E> cannot find any other nvdisp nodes [0002.024] E> no valid display unit config found in dtb [0002.030] W> display init failed [0002.033] initializing target [0002.036] calling apps_init() [0002.039] starting app kernel_boot_app [0002.062] I> found decompressor handler: lz4-legacy [0002.066] I> decompressing BMP blob ... [0002.076] I> Kernel type = Normal [0002.079] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.094] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.101] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.107] I> ########## Fixed storage boot ########## [0002.112] I> Loading kernel from partition ... [0002.117] W> No valid slot number is found in scratch register [0002.122] W> Return default slot: _a [0002.126] I> A/B: bin_type (24) slot 0 [0002.141] I> Boot image size read from image header: f2f08 [0002.147] I> Boot image load address: 0x0x80400000 [0002.151] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.094] I> Validate kernel ... [0003.097] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.105] I> kernel-dtb is already loaded [0003.109] I> Validate kernel-dtb ... [0003.112] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.120] I> Checking boot.img header magic ... [0003.124] I> [OK] [0003.126] I> Kernel hdr @0x80400000 [0003.129] I> Kernel dtb @0x80000000 [0003.132] I> decompressor handler not found [0003.136] I> Copying kernel image (477882 bytes) from 0x80400800 to 0x80800000 ... [0003.144] I> Done [0003.145] I> Move ramdisk (len: 0) from 0x80475800 to 0x94830000 [0003.153] I> Updated bpmp info to DTB [0003.159] I> Ramdisk: Base: 0x94830000; Size: 0x0 [0003.163] I> Updated initrd info to DTB [0003.167] W> WARN: Fail to override "console=none" in commandline [0003.173] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.180] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.187] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.194] I> disabled_core_mask: 0xffffff0c [0003.198] W> No valid slot number is found in scratch register [0003.204] W> Return default slot: _a [0003.207] I> Active slot suffix: [0003.210] I> add_boot_slot_suffix: slot_suffix = [0003.215] I> Linux Cmdline: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 [0003.251] I> Updated bootarg info to DTB [0003.255] W> MAC addr invalid! [0003.258] E> Failed to get WIFI MAC address [0003.262] W> MAC addr invalid! [0003.265] E> Failed to get Bluetooth MAC address [0003.269] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:e4:e2:70 [0003.276] E> Found no plugin manager ids in source DT [0003.280] W> Add plugin manager ids from board info [0003.285] E> "plugin-manager" doesn't exist, creating [0003.290] E> "ids" doesn't exist, creating [0003.294] E> "connection" doesn't exist, creating [0003.299] E> "configs" doesn't exist, creating [0003.303] I> create_pm_ids: id: 3489-0888-300-H, len: 15 [0003.308] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.319] I> Adding plugin-manager/ids/3489-0888-300=/i2c@c250000:module@0x50 [0003.326] E> "i2c@c250000" doesn't exist, creating [0003.331] E> "module@0x50" doesn't exist, creating [0003.338] I> Adding plugin-manager/ids/3489-0888-300-H [0003.345] I> Adding plugin-manager/configs/3489-mem-type 00 [0003.350] I> Adding plugin-manager/configs/3489-power-config 00 [0003.356] I> Adding plugin-manager/configs/3489-misc-config 00 [0003.362] I> Adding plugin-manager/configs/3489-modem-config 00 [0003.368] I> Adding plugin-manager/configs/3489-touch-config 00 [0003.374] I> Adding plugin-manager/configs/3489-display-config 00 [0003.380] I> Adding plugin-manager/cvm [0003.384] E> "chip-id" doesn't exist, creating [0003.388] I> Adding plugin-manager/chip-id/A02P [0003.393] E> "odm-data" doesn't exist, creating [0003.397] I> Adding /chosen/plugin-manager/odm-data [0003.407] I> added [base:0x80000000, size:0x70000000] to /memory [0003.413] I> added [base:0xf0200000, size:0x85600000] to /memory [0003.419] I> added [base:0x175e00000, size:0x200000] to /memory [0003.424] I> added [base:0x176600000, size:0x200000] to /memory [0003.430] I> added [base:0x177000000, size:0x200000] to /memory [0003.436] I> Updated memory info to DTB [0003.440] E> add_disp_param: failed to get display params for du=0 [0003.448] E> "reset" doesn't exist, creating [0003.452] E> "pmc-reset-reason" doesn't exist, creating [0003.458] E> "pmic-reset-reason" doesn't exist, creating [0003.464] I> Adding ecid(00000001645ca442080000000cfb0280) to DT [0003.470] I> disabled_core_mask: 0xffffff0c [0003.483] I> Add serial number:1422219046829 as DT property [0003.492] I> Plugin-manager override starting [0003.497] I> node /plugin-manager/fragement@0 matches [0003.507] I> node /plugin-manager/fragement@4 matches [0003.553] I> node /plugin-manager/fragment-p3310-c00-camera matches [0003.579] I> Disable plugin-manager status in FDT [0003.583] I> Plugin-manager override finished successfully [0003.588] I> tegrabl_load_kernel_and_dtb: Done [0003.593] E> tegrabl_display_clear: display is not initialized [0003.598] W> Boot logo display failed... [0003.602] I> Kernel EP: 0x80800000, DTB: 0x80000000 U-Boot 2016.07-g0536cf2a27 (Dec 09 2019 - 22:43:10 -0800) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 3.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 733 bytes read in 132 ms (4.9 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 5565140 bytes read in 209 ms (25.4 MiB/s) Retrieving file: /boot/Image 34191368 bytes read in 853 ms (38.2 MiB/s) append: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000080000000, end 000000008005dd5b Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-1935) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Dec 9 22:52:02 PST 2019 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 85600000 [ 0.000000] OF: fdt: - 175e00000 , 200000 [ 0.000000] OF: fdt: - 176600000 , 200000 [ 0.000000] OF: fdt: - 177000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.521650] pca953x 0-0074: failed reading register [ 0.522435] pca953x 0-0077: failed reading register [ 1.083473] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.146071] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517 [ 1.402812] FAN: coudln't get the regulator [ 1.443866] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 1.444225] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 1.733455] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.747091] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 1.755562] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 3.955893] cgroup: cgroup2: unknown option "nsdelegate" [ 4.427336] tegra_cec 3960000.tegra_cec: timeout in tegra_cec_native_write_l:172. [ 4.549147] tegra-xusb-padctl 3520000.xusb_padctl: failed to setup XUSB ports: -517 [ 5.142160] random: crng init done [ 5.145590] random: 7 urandom warning(s) missed due to ratelimiting [ 6.372328] CPU1: shutdown [ 6.445257] CPU2: shutdown Ubuntu 18.04.3 LTS michung-desktop ttyS0 michung-desktop login: