[BEGIN] 2021/5/21 11:03:00 bash-4.3# ? [0000.024] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Chip revision : A02P [0000.044] I> Bootrom patch version : 15 (correctly patched) [0000.049] I> ATE fuse revision : 0x200 [0000.053] I> Ram repair fuse : 0x0 [0000.056] I> Ram Code : 0x0 [0000.058] I> rst_source : 0x0 [0000.061] I> rst_level : 0x0 [0000.065] I> Boot-device: QSPI [0000.067] I> Qspi flash params source = brbct [0000.071] I> Qspi using bpmp-dma [0000.074] I> Qspi clock source : pllp [0000.078] I> QSPI Flash Size = 32 MB [0000.081] I> Qspi initialized successfully [0000.085] I> Active Boot chain : 0 [0000.088] I> Boot-device: QSPI [0000.091] I> Qspi flash params source = brbct [0000.097] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 30000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.112] W> Skipping boost for clk: BPMP_APB [0000.116] W> Skipping boost for clk: AXI_CBB [0000.120] W> Skipping boost for clk: AON_CPU_NIC [0000.124] W> Skipping boost for clk: CAN1 [0000.128] W> Skipping boost for clk: CAN2 [0000.132] I> Boot-device: QSPI [0000.135] I> Boot-device: QSPI [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi using bpmp-dma [0000.145] I> Qspi clock source : pllc_out0 [0000.149] I> Qspi reinitialized [0000.152] I> Qspi flash params source = mb1bct [0000.157] I> ECC region[0]: Start:0x0, End:0x0 [0000.161] I> ECC region[1]: Start:0x0, End:0x0 [0000.165] I> ECC region[2]: Start:0x0, End:0x0 [0000.170] I> ECC region[3]: Start:0x0, End:0x0 [0000.174] I> ECC region[4]: Start:0x0, End:0x0 [0000.178] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.184] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.188] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.192] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.197] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.202] E> FAILED: Thermal config [0000.210] E> FAILED: MEMIO rail config [0000.220] I> Boot-device: QSPI [0000.223] I> Qspi flash params source = mb1bct [0000.232] I> Qspi flash params source = mb1bct [0000.243] I> Qspi flash params source = mb1bct [0000.310] I> Qspi flash params source = mb1bct [0000.319] I> Qspi flash params source = mb1bct [0000.346] I> Qspi flash params source = mb1bct [0000.358] I> MB1 done ??n enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ? ?000.366] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-aa987a31) [0000.367] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.367] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.368] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.374] W> device prod register failed [0000.378] I> Boot-device: QSPI [0000.380] I> Boot_device: QSPI_FLASH instance: 0 [0000.386] I> QSPI Flash Size = 32 MB [0000.388] I> Qspi initialized successfully [0000.392] I> qspi flash-0 params source = boot args [0000.774] I> sdmmc DDR50 mode [0000.776] I> sdmmc-3 params source = safe params [0000.780] I> Found 47 partitions in QSPI_FLASH (instance 0) [0000.781] W> Cannot find any partition table for 00000003 [0000.786] I> Found 11 partitions in SDMMC_USER (instance 3) [0000.788] I> Active Boot chain : 0 [0000.789] I> parsing oem signed section of bpmp-fw header done [0000.789] I> bpmp-fw binary init read from storage [0000.790] I> oem authentication of bpmp-fw header done [0000.803] I> bpmp-fw binary done read from storage [0000.803] I> bpmp-fw: Authentication init Done [0000.804] I> parsing oem signed section of cpubl header done [0000.805] I> cpubl binary init read from storage [0000.810] I> bpmp-fw: Authentication Finalize Done [0000.815] I> oem authentication of cpubl header done [0000.822] I> cpubl binary done read from storage [0000.824] I> cpubl: Authentication init Done [0000.828] I> parsing oem signed section of rce header done [0000.833] I> rce binary init read from storage [0000.838] I> Relocating BR-BCT [0000.840] I> cpubl: Authentication Finalize Done [0000.845] I> oem authentication of rce header done [0000.850] I> rce binary done read from storage [0000.854] I> rce: Authentication init Done [0000.858] I> parsing oem signed section of ape header done [0000.863] I> ape binary init read from storage [0000.867] I> rce: Authentication Finalize Done [0000.872] I> oem authentication of ape header done [0000.876] I> ape binary done read from storage [0000.880] I> ape: Authentication init Done [0000.885] I> parsing oem signed section of tos header done [0000.890] I> tos binary init read from storage [0000.894] I> ape: Authentication Finalize Done [0000.899] I> oem authentication of tos header done [0000.905] I> tos binary done read from storage [0000.907] I> tos: Authentication init Done [0000.912] I> parsing oem signed section of bpmp-fw-dtb header done [0000.917] I> bpmp-fw-dtb binary init read from storage [0000.922] I> tos: Authentication Finalize Done [0000.928] I> oem authentication of bpmp-fw-dtb header done [0000.932] I> bpmp-fw-dtb binary done read from storage [0000.937] I> bpmp-fw-dtb: Authentication init Done [0000.942] I> parsing oem signed section of cpubl-dtb header done [0000.947] I> cpubl-dtb binary init read from storage [0000.952] I> bpmp-fw-dtb: Authentication Finalize Done [0000.999] I> oem authentication of cpubl-dtb header done [0001.000] I> cpubl-dtb binary done read from storage [0001.000] I> cpubl-dtb: Authentication init Done [0001.001] I> parsing oem signed section of eks header done [0001.002] I> eks binary init read from storage [0001.002] I> cpubl-dtb: Authentication Finalize Done [0001.003] I> oem authentication of eks header done [0001.008] I> eks binary done read from storage [0001.012] I> eks: Authentication init Done [0001.016] I> eks: Authentication Finalize Done [0001.020] I> EKB detected (length: 0x410) @ VA:0x52714400 ??TICE: BL31: v1.3(release):fe06da916 NOTICE: BL31: Built : 18:06:49, Apr 8 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete ? welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized ? ?001.361] I> Welcome to Cboot??q initialized WARNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized ? [0001.362] I> Cboot Version: t194-d00c695c [0001.364] I> CPU-BL Params @ 0xf2820000 [0001.367] I> 0) Base:0x00000000 Size:0x00000000 [0001.372] I> 1) Base:0xf1100000 Size:0x00100000 [0001.376] I> 2) Base:0xf2000000 Size:0x00200000 [0001.381] I> 3) Base:0xf1200000 Size:0x00200000 ??k_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized dvs_debugfs initialized fmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ??001.385] I> 4) Base:0xf1000000 Size:0x00100000 [0001.529] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.534] I> 6) Base:0xf3800000 Size:0x00400000 [0001.538] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.542] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.547] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.551] I> 10) Base:0xf3000000 Size:0x00800000 [0001.556] I> 11) Base:0x40000000 Size:0x00040000 [0001.560] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.565] I> 13) Base:0x40046000 Size:0x00002000 [0001.569] I> 14) Base:0x40048000 Size:0x00002000 [0001.574] I> 15) Base:0xac000000 Size:0x00004000 [0001.578] I> 16) Base:0x4004a000 Size:0x00002000 [0001.583] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.587] I> 18) Base:0x4004c000 Size:0x00002000 [0001.592] I> 19) Base:0xf2200000 Size:0x00600000 [0001.596] I> 20) Base:0x4004e000 Size:0x00002000 [0001.600] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.605] I> 22) Base:0x00000000 Size:0x00000000 [0001.609] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.614] I> 24) Base:0xf6000000 Size:0x02000000 [0001.618] I> 25) Base:0x40050000 Size:0x00002000 [0001.623] I> 26) Base:0x40040000 Size:0x00006000 [0001.627] I> 27) Base:0xf1800000 Size:0x00400000 [0001.632] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.636] I> 29) Base:0xf1400000 Size:0x00400000 [0001.641] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.645] I> 31) Base:0x00000000 Size:0x00000000 [0001.650] I> 32) Base:0xf8000000 Size:0x08000000 [0001.654] I> 33) Base:0x00000000 Size:0x00000000 [0001.659] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.663] I> 35) Base:0xab000000 Size:0x01000000 [0001.667] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.672] I> 37) Base:0xf2800000 Size:0x00800000 [0001.676] I> 38) Base:0x80000000 Size:0x20000000 [0001.681] I> 39) Base:0xb0000000 Size:0x08000000 [0001.685] I> 40) Base:0x00000000 Size:0x00000000 [0001.690] I> 41) Base:0x00000000 Size:0x00000000 [0001.694] I> 42) Base:0x00000000 Size:0x00000000 [0001.699] I> 43) Base:0x00000000 Size:0x00000000 [0001.703] I> 44) Base:0x00000000 Size:0x00000000 [0001.708] I> 45) Base:0x00000000 Size:0x00000000 [0001.712] GIC-SPI Target CPU: 0 [0001.715] Interrupts Init done [0001.718] calling constructors [0001.721] initializing heap [0001.723] I> Heap: [0xa06905a8 ... 0xab000000] [0001.728] initializing threads [0001.731] initializing timers [0001.733] creating bootstrap completion thread [0001.738] top of bootstrap2() [0001.740] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.745] initializing platform [0001.748] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.754] W> device prod register failed [0001.757] I> Bl_dtb @0xaaf00000 [0001.763] E> "plugin-manager" doesn't exist, creating [0001.765] E> "ids" doesn't exist, creating [0001.769] E> "connection" doesn't exist, creating [0001.774] E> "configs" doesn't exist, creating [0001.782] I> Find /i2c@3160000's alias i2c0 [0001.782] I> Reading eeprom i2c=0 address=0x50 [0001.812] I> Device at /i2c@3160000:0x50 [0001.812] I> Reading eeprom i2c=0 address=0x57 [0001.812] E> I2C: slave not found in slaves. [0001.813] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.814] E> I2C_DEV: Failed to send register address 0x00000000. [0001.814] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. [0001.822] E> eeprom: Failed to read I2C slave device [0001.826] I> Eeprom read failed 0x3526070d [0001.832] I> Find /i2c@c240000's alias i2c1 [0001.834] I> Reading eeprom i2c=1 address=0x50 [0001.840] E> I2C: slave not found in slaves. [0001.843] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.851] E> I2C_DEV: Failed to send register address 0x00000000. [0001.856] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.866] E> eeprom: Retry to read I2C slave device. [0001.871] E> I2C: slave not found in slaves. [0001.875] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.883] E> I2C_DEV: Failed to send register address 0x00000000. [0001.888] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.898] E> eeprom: Failed to read I2C slave device [0001.902] I> Eeprom read failed 0x3526070d [0001.906] I> create_pm_ids: id: 3668-0001-200-G, len: 15 [0001.911] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.923] I> Adding plugin-manager/ids/3668-0001-200=/i2c@3160000:module@0x50 [0001.930] E> "i2c@3160000" doesn't exist, creating [0001.934] E> "module@0x50" doesn't exist, creating [0001.941] I> Adding plugin-manager/cvm [0001.943] E> "chip-id" doesn't exist, creating [0001.947] I> Adding plugin-manager/chip-id/A02P [0001.951] I> Plugin-manager override starting [0001.957] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.965] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.970] I> node /plugin-manager/fragement-tegra-sdhci-sd-dis matches [0001.978] I> Disable plugin-manager status in FDT [0001.979] I> Plugin-manager override finished successfully [0001.983] I> gpio framework initialized [0001.987] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.995] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0002.002] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.009] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.016] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.023] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.030] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.036] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.044] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.051] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.058] I> fixed regulator driver initialized [0002.066] I> register 'maxim' power off handle [0002.066] I> virtual i2c enabled [0002.069] I> registered 'maxim,max20024' pmic [0002.074] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.080] I> Boot-device: QSPI [0002.083] I> Boot_device: QSPI_FLASH instance: 0 [0002.088] I> QSPI source rate = 204000 Khz [0002.091] I> Requested rate for QSPI clock = 34000 Khz [0002.096] I> BPMP-set rate for QSPI clk = 34000 Khz [0002.101] I> QSPI Flash Size = 32 MB [0002.104] I> Qspi initialized successfully [0002.108] I> qspi flash-0 params source = boot args [0002.113] I> create_pm_ids: id: 3668-0001-200-G, len: 15 [0002.118] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.133] I> sdmmc-3 params source = safe params [0002.135] I> Found 47 partitions in QSPI_FLASH (instance 0) [0002.155] W> Cannot find any partition table for 00000003 [0002.168] I> Found 11 partitions in SDMMC_USER (instance 3) [0002.175] I> regulator 'vdd-hdmi-5v0' already enabled [0002.178] I> regulator 'vdd-hdmi-5v0' already enabled [0002.179] I> hdmi cable connected [0002.180] E> set volts not configured for 'vdd-1v0' [0002.181] E> set volts not configured for 'vdd-1v8-hs' [0002.184] E> invalid display type [0002.185] E> cannot find any other nvdisp nodes [0002.200] I> edid read success [0002.212] I> edid read success [0002.213] I> width = 640, height = 480, frequency = 25174825 [0002.213] I> width = 640, height = 480, frequency = 25174825 [0002.213] I> width = 640, height = 480, frequency = 25174825 [0002.214] I> width = 640, height = 480, frequency = 25174825 [0002.214] I> width = 1366, height = 768, frequency = 85500000 [0002.218] I> width = 720, height = 576, frequency = 27000000 [0002.223] I> width = 720, height = 480, frequency = 26973026 [0002.229] I> width = 720, height = 480, frequency = 26973026 [0002.234] I> width = 720, height = 576, frequency = 26973026 [0002.240] I> width = 720, height = 576, frequency = 26973026 [0002.245] I> width = 1280, height = 720, frequency = 74175824 [0002.251] I> width = 1280, height = 720, frequency = 74175824 [0002.257] I> width = 1920, height = 1080, frequency = 148351648 [0002.262] I> width = 1920, height = 1080, frequency = 148351648 [0002.268] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.278] I> hdmi_enable, starting HDMI initialisation [0002.283] I> hdmi_enable, HDMI initialisation complete [0002.294] I> Load in CBoot Boot Options partition and parse it [0002.296] E> Error -9 when finding node with path /boot-configuration [0002.296] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.304] I> Hit any key to stop autoboot: 4 3 2 1 [0004.311] initializing target [0004.311] calling apps_init() [0004.312] starting app kernel_boot_app [0004.318] I> found decompressor handler: lz4-legacy [0004.318] I> decompressing BMP blob ... [0004.322] I> Kernel type = Normal [0004.322] I> Loading kernel-bootctrl from partition [0004.323] I> Loading partition kernel-bootctrl at 0xa4ac0000 from device(0x1) [0004.331] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.331] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.332] I> ########## SD boot ########## [0004.337] I> Found sdcard [0004.340] E> set volts not configured for 'vddio-emmc-3v3' [0004.349] E> Error in command_complete 18001 int_status [0004.349] E> Sending CMD_SD_SEND_IF_COND failed [0004.363] W> Error opening sdcard-2 [0004.364] I> -0 params source = [0004.364] E> Failed to initialize device 6-0 [0004.364] E> SD boot failed, err: 252643078 [0004.368] I> ########## USB boot ########## [0004.384] I> USB Firmware Version: 60.06 release [0004.439] I> regulator of usb2-0 already enabled [0004.443] I> regulator of usb2-1 already enabled [0004.448] I> enabling 'vdd-usb2-5v' regulator [0005.512] I> USB 2.0 port 2 new high-speed USB device detected [0005.513] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9f800, cmd_ring.dma = 0xa0e9f840 [0005.514] E> slot id is 1 [0005.515] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9f800, cmd_ring.dma = 0xa0e9f840 [0005.522] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9f800, cmd_ring.dma = 0xa0e9f840 [0005.524] I> [0005.525] I> Enumerated USB Device 0bda:5411 [0005.529] I> [0005.530] E> Enumerated device doesn't belong to MSD class or protocol is not bulk-only!! [0005.538] E> USBMSD: Failed to initialize Enumerated USB device either not an MSD device or supported protoco[0005.548] E> USBMSD: Failed to open usbmsd open, 0. [0005.553] E> Error opening USBMSD driver 0, err: 7c7c0312 [0005.558] E> Failed to initialize device 5-0 [0005.562] E> USB boot failed, err: 2088502034 [0005.566] I> ########## Fixed storage boot ########## [0005.571] I> Already published: 00010003 [0005.575] I> Look for boot partition [0005.578] I> Fallback: assuming 0th partition is boot partition [0005.584] I> Detect filesystem [0005.611] I> Loading extlinux.conf ... [0005.611] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0005.648] I> L4T boot options [0005.648] I> [1]: "primary kernel" [0005.649] I> Enter choice: [0008.650] I> Continuing with default option: 1 [0008.650] I> Loading kernel sig file from rootfs ... [0008.650] I> rootfs path: /sdmmc_user/boot/Image.sig [0008.669] I> Loading kernel binary from rootfs ... [0008.669] I> rootfs path: /sdmmc_user/boot/Image [0009.084] I> Validate kernel ... [0009.084] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0009.396] E> digest on binary did not match!! [0009.397] C> OEM authentication of kernel payload failed! [0009.397] W> Failed to validate kernel binary (err=1077936152, fail=0) [0009.397] W> Security fuse not burned, ignore validation failure [0009.405] I> No kernel-dtb binary path [0009.405] I> A/B: bin_type (38) slot 0 [0009.405] I> Loading kernel-dtb from partition [0009.406] I> Loading partition kernel-dtb at 0x91000000 from device(0x1) [0009.423] I> Validate kernel-dtb ... [0009.423] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0009.426] I> Loading ramdisk from rootfs ... [0009.427] I> rootfs path: /sdmmc_user/boot/initrd [0009.507] I> Kernel hdr @0xa4ac0000 [0009.507] I> Kernel dtb @0x90000000 [0009.508] I> decompressor handler not found [0009.508] I> Copying kernel image (34408456 bytes) from 0xa4ac0000 to 0x80080000 ... [0009.518] I> Done [0009.519] I> Updated bpmp info to DTB [0009.520] I> Ramdisk: Base: 0x92000000; Size: 0x54ec8f [0009.520] I> Updated initrd info to DTB [0009.521] W> WARN: Fail to override "console=none" in commandline [0009.521] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0009.527] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0009.535] I> Active slot suffix: [0009.538] I> add_boot_slot_suffix: slot_suffix = 0xa0696000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0009.580] I> Updated bootarg info to DTB [0009.583] W> MAC addr invalid! [0009.586] E> Failed to get WIFI MAC address [0009.590] W> MAC addr invalid! [0009.593] E> Failed to get Bluetooth MAC address [0009.598] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:05:c5:d2 [0009.604] E> "plugin-manager" doesn't exist, creating [0009.609] I> Adding /chosen/plugin-manager/cvm [0009.613] E> "chip-id" doesn't exist, creating [0009.617] I> Adding /chosen/plugin-manager/chip-id [0009.622] E> "configs" doesn't exist, creating [0009.626] I> Adding /chosen/plugin-manager/configs [0009.631] E> "ids" doesn't exist, creating [0009.635] I> Adding /chosen/plugin-manager/ids [0009.639] E> "odm-data" doesn't exist, creating [0009.643] I> Adding /chosen/plugin-manager/odm-data [0009.650] E> "memory" doesn't exist, creating [0009.653] I> [0] START: 0x80000000, END: 0xac000000 [0009.657] I> [1] START: 0xac004000, END: 0xf09d0000 [0009.662] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0009.666] I> dram_block larger than 80000000 [0009.671] I> [3] START: 0x100000000, END: 0x280000000 [0009.675] I> added [base:0x80000000, size:0x2c000000] to /memory [0009.681] I> added [base:0xac200000, size:0x44600000] to /memory [0009.687] I> added [base:0x100000000, size:0x180000000] to /memory [0009.694] I> Updated memory info to DTB [0009.697] E> add_disp_param: failed to get display params for du=1 [0009.703] E> "reset" doesn't exist, creating [0009.708] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0009.712] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0009.716] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0009.721] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0009.726] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0009.731] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0009.735] I> Deleted cpu@6 node in DT [0009.739] I> Deleted cpu@7 node in DT [0009.743] I> Deleted cluster3 node in FDT [0009.747] I> Update arm-pmu in FDT [0009.750] I> - update property: interrupts [0009.753] I> - update property: interrupt-affinity [0009.759] E> "misc-data" doesn't exist, creating [0009.763] I> Boot-device: QSPI [0009.765] W> Unknown boot device [0009.768] I> Add storage-qspi to plugin-manager/misc-data [0009.774] W> Unknown storage device [0009.777] I> Add serial number:1421720026747 as DT property [0009.783] I> Plugin-manager override starting [0009.787] I> node /plugin-manager/fragment-pcie-c5-rp matches [0009.794] I> node /plugin-manager/fragement-tegra-wdt-en matches [0009.800] I> node /plugin-manager/fragement-tegra-sdhci-sd-dis matches [0009.807] I> Disable plugin-manager status in FDT [0009.809] I> Plugin-manager override finished successfully [0009.815] I> tegrabl_load_kernel_and_dtb: Done [0009.837] I> QSPI: erasing sectors from 176 - 176 [0009.837] I> QSPI: recoverying tail blocks from 22536 - 22656 [0010.864] I> QSPI: erasing sectors from 177 - 177 [0010.865] I> QSPI: recoverying tail blocks from 22664 - 22784 [0011.897] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (root@lv) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #8 SMP PREEMPT Mon May 11 11:01:35 CST 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069c000 [ 0.000000] Found lut_mem: 00002008@a0696000 ??RNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: pll_d2 has no dyn ramp WARNING: at platform/drivers/pg/pg-gpu-t194.c:185 WARNING: at platform/drivers/pg/pg-gpu-t194.c:185 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 ?? 1.949893] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.949943] imx219 9-0010: board setup failed [ 1.973821] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.973874] imx219 10-0010: board setup failed [ 4.116003] cgroup: cgroup2: unknown option "nsdelegate" ??RNING: at platform/drivers/pg/pg-gpu-t194.c:185 WARNING: at platform/drivers/pg/pg-gpu-t194.c:185 ?? 4.693555] random: crng init done [ 4.693712] random: 7 urandom warning(s) missed due to ratelimiting [ 5.819036] mc-err: (255) csr_pcie5r: EMEM address decode error [ 5.819227] mc-err: status = 0x200640e2; addr = 0xffffffff00; hi_adr_reg=ff08 [ 5.819395] mc-err: secure: yes, access-type: read [ 5.819622] mc-err: mcerr: unknown intr source intstatus = 0x00000000, intstatus_1 = 0x00000000 [ 5.819646] t19x-arm-smmu 12000000.iommu: Unhandled context fault: smmu1, iova=0x4ffe36000, fsynr=0x210003, cb=1, sid=91(0x5b - PCIE5), pgd=2610b4003, pud=2610b4003, pmd=2610b5003, pte=0 [ 5.820277] mc-err: (255) csr_pcie5r: EMEM address decode error [ 5.820431] mc-err: status = 0x200640e2; addr = 0xffffffff00; hi_adr_reg=ff08 [ 5.820599] mc-err: secure: yes, access-type: read [ 5.820751] mc-err: mcerr: unknown intr source intstatus = 0x00000000, intstatus_1 = 0x00000000 [ 5.820770] t19x-arm-smmu 12000000.iommu: Unhandled context fault: smmu1, iova=0x4ffe36000, fsynr=0x210003, cb=1, sid=91(0x5b - PCIE5), pgd=2610b4003, pud=2610b4003, pmd=2610b5003, pte=0 [ 5.821728] mc-err: Too many MC errors; throttling prints [ 5.822118] t19x-arm-smmu 12000000.iommu: Unhandled context fault: smmu1, iova=0x4ffe36000, fsynr=0x210003, cb=1, sid=91(0x5b - PCIE5), pgd=2610b4003, pud=2610b4003, pmd=2610b5003, pte=0 [ 5.837325] t19x-arm-smmu 12000000.iommu: Unhandled context fault: smmu1, iova=0x4ffe36000, fsynr=0x210003, cb=1, sid=91(0x5b - PCIE5), pgd=2610b4003, pud=2610b4003, pmd=2610b5003, pte=0 [ 5.854062] t19x-arm-smmu 12000000.iommu: Unhandled context fault: smmu1, iova=0x4ffe36000, fsynr=0x210003, cb=1, sid=91(0x5b - PCIE5), pgd=2610b4003, pud=2610b4003, pmd=2610b5003, pte=0 [ 5.870868] t19x-arm-smmu 12000000.iommu: Unhandled context fault: smmu1, iova=0x4ffe36000, fsynr=0x210003, cb=1, sid=91(0x5b - PCIE5), pgd=2610b4003, pud=2610b4003, pmd=2610b5003, pte=0 [ 5.956233] t19x-arm-smmu 12000000.iommu: Unhandled context fault: smmu1, iova=0x4ffbd7000, fsynr=0x210003, cb=1, sid=91(0x5b - PCIE5), pgd=2610b4003, pud=2610b4003, pmd=24ff44003, pte=0 [ 6.096454] systemd: 41 output lines suppressed due to ratelimiting [ 8.112351] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 8.112783] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 8.260305] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got invalid poll event 16 on pipe (fd=61) [ 8.260582] systemd[1]: proc-sys-fs-binfmt_misc.automount: Failed with result 'resources'. [ 9.094665] using random self ethernet address [ Ubuntu 18.04.5 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 22.620935] mc-err: (255) csr_pcie5r1: EMEM address decode error [ 22.621080] mc-err: status = 0x200640ef; addr = 0xffffffff00; hi_adr_reg=ff08 [ 22.621211] mc-err: secure: yes, access-type: read [ 22.621311] mc-err: mcerr: unknown intr source intstatus = 0x00000000, intstatus_1 = 0x00000000 [ 22.621356] t19x-arm-smmu 12000000.iommu: Unhandled context fault: smmu1, iova=0x4ffbdf000, fsynr=0x210003, cb=1, sid=91(0x5b - PCIE5), pgd=2610b4003, pud=2610b4003, pmd=24ff44003, pte=0 [ 39.103687] t19x-arm-smmu 12000000.iommu: Unhandled context fault: smmu0, iova=0x4fd93f000, fsynr=0x10003, cb=1, sid=91(0x5b - PCIE5), pgd=2610b4003, pud=2610b4003, pmd=203e16003, pte=0 [ 39.104454] mc-err: (255) csr_pcie5r: EMEM address decode error [ 39.104582] mc-err: status = 0x200640e2; addr = 0xffffffff00; hi_adr_reg=ff08 [ 39.104745] mc-err: secure: yes, access-type: read [ 39.104856] mc-err: mcerr: unknown intr source intstatus = 0x00000000, intstatus_1 = 0x00000000 Ubuntu 18.04.5 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: NVIDIA Password: Login incorrect nvidia-desktop login: nvidia Password: Last login: 5 20 10:47:55 CST 2021 from 192.168.55.101 on pts/3 Welcome to Ubuntu 18.04.5 LTS (GNU/Linux 4.9.140-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 6 updates can be applied immediately. 1 of these updates is a standard security update. To see these additional updates run: apt list --upgradable *** System restart required *** nvidia@nvidia-desktop:~$ sudo reboot [ 354.803737] watchdog: watchdog0: watchdog did not stop! [ 354.811556] systemd-shutdow: 20 output lines suppressed due to ratelimiting ??RNING: at platform/drivers/pg/pg-gpu-t194.c:185 ?? 355.291448] reboot: Restarting system ?LShutdown state requested 1 Rebooting system ... ? [0000.024] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 1.5.1.3-t194-41334769-d2a21c57) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Chip revision : A02P [0000.044] I> Bootrom patch version : 15 (correctly patched) [0000.049] I> ATE fuse revision : 0x200 [0000.053] I> Ram repair fuse : 0x0 [0000.056] I> Ram Code : 0x0 [0000.058] I> rst_source : 0xb [0000.061] I> rst_level : 0x1 [0000.065] I> Boot-device: QSPI [0000.067] I> Qspi flash params source = brbct [0000.071] I> Qspi using bpmp-dma [0000.074] I> Qspi clock source : pllp [0000.078] I> QSPI Flash Size = 32 MB [0000.081] I> Qspi initialized successfully [0000.085] I> Active Boot chain : 1 [0000.088] I> Boot-device: QSPI [0000.091] I> Qspi flash params source = brbct [0000.097] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.103] I> Temperature = 39000 [0000.106] W> Skipping boost for clk: BPMP_CPU_NIC [0000.111] W> Skipping boost for clk: BPMP_APB [0000.115] W> Skipping boost for clk: AXI_CBB [0000.119] W> Skipping boost for clk: AON_CPU_NIC [0000.123] W> Skipping boost for clk: CAN1 [0000.127] W> Skipping boost for clk: CAN2 [0000.131] I> Boot-device: QSPI [0000.134] I> Boot-device: QSPI [0000.136] I> Qspi flash params source = mb1bct [0000.141] I> Qspi using bpmp-dma [0000.143] I> Qspi clock source : pllc_out0 [0000.147] I> Qspi reinitialized [0000.150] I> Qspi flash params source = mb1bct [0000.156] I> ECC region[0]: Start:0x0, End:0x0 [0000.160] I> ECC region[1]: Start:0x0, End:0x0 [0000.164] I> ECC region[2]: Start:0x0, End:0x0 [0000.168] I> ECC region[3]: Start:0x0, End:0x0 [0000.172] I> ECC region[4]: Start:0x0, End:0x0 [0000.176] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.182] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.186] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.191] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.195] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.201] E> FAILED: Thermal config [0000.208] E> FAILED: MEMIO rail config [0000.218] I> Boot-device: QSPI [0000.221] I> Qspi flash params source = mb1bct [0000.230] I> Qspi flash params source = mb1bct [0000.242] I> Qspi flash params source = mb1bct [0000.309] I> Qspi flash params source = mb1bct [0000.318] I> Qspi flash params source = mb1bct [0000.345] I> Qspi flash params source = mb1bct [0000.356] I> MB1 done ??n enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init ? ?000.365] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-389501e9) [0000.365] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.366] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.366] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.372] W> device prod register failed [0000.376] I> Boot-device: QSPI [0000.379] I> Boot_device: QSPI_FLASH instance: 0 [0000.384] I> QSPI Flash Size = 32 MB [0000.390] I> Qspi initialized successfully [0000.391] I> qspi flash-0 params source = boot args [0000.717] I> sdmmc DDR50 mode [0000.719] I> sdmmc-3 params source = safe params [0000.723] I> Found 47 partitions in QSPI_FLASH (instance 0) [0000.725] W> Cannot find any partition table for 00000003 [0000.727] I> Found 11 partitions in SDMMC_USER (instance 3) [0000.728] I> Active Boot chain : 1 [0000.729] I> parsing oem signed section of bpmp-fw header done [0000.729] I> bpmp-fw binary init read from storage [0000.730] I> oem authentication of bpmp-fw header done [0000.744] I> bpmp-fw binary done read from storage [0000.744] I> bpmp-fw: Authentication init Done [0000.745] I> parsing oem signed section of cpubl header done [0000.749] I> cpubl binary init read from storage [0000.753] I> bpmp-fw: Authentication Finalize Done [0000.758] I> oem authentication of cpubl header done [0000.765] I> cpubl binary done read from storage [0000.767] I> cpubl: Authentication init Done [0000.772] I> parsing oem signed section of rce header done [0000.777] I> rce binary init read from storage [0000.781] I> Relocating BR-BCT [0000.784] I> cpubl: Authentication Finalize Done [0000.789] I> oem authentication of rce header done [0000.793] I> rce binary done read from storage [0000.797] I> rce: Authentication init Done [0000.802] I> parsing oem signed section of ape header done [0000.807] I> ape binary init read from storage [0000.811] I> rce: Authentication Finalize Done [0000.815] I> oem authentication of ape header done [0000.820] I> ape binary done read from storage [0000.824] I> ape: Authentication init Done [0000.828] I> parsing oem signed section of tos header done [0000.833] I> tos binary init read from storage [0000.838] I> ape: Authentication Finalize Done [0000.842] I> oem authentication of tos header done [0000.848] I> tos binary done read from storage [0000.851] I> tos: Authentication init Done [0000.855] I> parsing oem signed section of bpmp-fw-dtb header done [0000.861] I> bpmp-fw-dtb binary init read from storage [0000.866] I> tos: Authentication Finalize Done [0000.872] I> oem authentication of bpmp-fw-dtb header done [0000.875] I> bpmp-fw-dtb binary done read from storage [0000.880] I> bpmp-fw-dtb: Authentication init Done [0000.885] I> parsing oem signed section of cpubl-dtb header done [0000.891] I> cpubl-dtb binary init read from storage [0000.896] I> bpmp-fw-dtb: Authentication Finalize Done [0000.953] I> oem authentication of cpubl-dtb header done [0000.954] I> cpubl-dtb binary done read from storage [0000.955] I> cpubl-dtb: Authentication init Done [0000.956] I> parsing oem signed section of eks header done [0000.956] I> eks binary init read from storage [0000.957] I> cpubl-dtb: Authentication Finalize Done [0000.958] I> oem authentication of eks header done [0000.962] I> eks binary done read from storage [0000.966] I> eks: Authentication init Done [0000.970] I> eks: Authentication Finalize Done [0000.974] I> EKB detected (length: 0x410) @ VA:0x52714400 ??TICE: BL31: v1.3(release):de895fd9e NOTICE: BL31: Built : 20:51:20, Oct 27 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete ? welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is 57f8a77779f848bf2ecf21dabee5645f tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized mrq initialized ? ?001.317] I> Welcome to Cboot ??RNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized ??001.317] I> Cboot Version: t194-aad9d75e [0001.319] I> CPU-BL Params @ 0xf2820000 [0001.323] I> 0) Base:0x00000000 Size:0x00000000 [0001.327] I> 1) Base:0xf1100000 Size:0x00100000 ??k_set_parent failed for clk can1, parent pll_aon (-22) clk_set_parent failed for clk can2, parent pll_aon (-22) clk_set_parent failed for clk dmic5, parent pll_aon (-22) clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_set_parent failed for clk spi2, parent pll_aon (-22) clk_set_parent failed for clk pwm4, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized dvs_debugfs initialized fmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ??001.331] I> 2) Base:0xf2000000 Size:0x00200000 [0001.511] I> 3) Base:0xf1200000 Size:0x00200000 [0001.516] I> 4) Base:0xf1000000 Size:0x00100000 [0001.520] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.524] I> 6) Base:0xf3800000 Size:0x00400000 [0001.529] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.533] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.538] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.542] I> 10) Base:0xf3000000 Size:0x00800000 [0001.547] I> 11) Base:0x40000000 Size:0x00040000 [0001.551] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.556] I> 13) Base:0x40046000 Size:0x00002000 [0001.560] I> 14) Base:0x40048000 Size:0x00002000 [0001.565] I> 15) Base:0xac000000 Size:0x00004000 [0001.569] I> 16) Base:0x4004a000 Size:0x00002000 [0001.574] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.578] I> 18) Base:0x4004c000 Size:0x00002000 [0001.582] I> 19) Base:0xf2200000 Size:0x00600000 [0001.587] I> 20) Base:0x4004e000 Size:0x00002000 [0001.591] I> 21) Base:0xf09d0000 Size:0x0000c000 [0001.596] I> 22) Base:0x00000000 Size:0x00000000 [0001.600] I> 23) Base:0xf09e0000 Size:0x00020000 [0001.605] I> 24) Base:0xf6000000 Size:0x02000000 [0001.609] I> 25) Base:0x40050000 Size:0x00002000 [0001.614] I> 26) Base:0x40040000 Size:0x00006000 [0001.618] I> 27) Base:0xf1800000 Size:0x00400000 [0001.623] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.627] I> 29) Base:0xf1400000 Size:0x00400000 [0001.632] I> 30) Base:0xf0a00000 Size:0x00100000 [0001.636] I> 31) Base:0x00000000 Size:0x00000000 [0001.640] I> 32) Base:0xf8000000 Size:0x08000000 [0001.645] I> 33) Base:0x00000000 Size:0x00000000 [0001.649] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.654] I> 35) Base:0xab000000 Size:0x01000000 [0001.658] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.663] I> 37) Base:0xf2800000 Size:0x00800000 [0001.667] I> 38) Base:0x80000000 Size:0x20000000 [0001.672] I> 39) Base:0xb0000000 Size:0x08000000 [0001.676] I> 40) Base:0x00000000 Size:0x00000000 [0001.681] I> 41) Base:0x00000000 Size:0x00000000 [0001.685] I> 42) Base:0x00000000 Size:0x00000000 [0001.690] I> 43) Base:0x00000000 Size:0x00000000 [0001.694] I> 44) Base:0x00000000 Size:0x00000000 [0001.698] I> 45) Base:0x00000000 Size:0x00000000 [0001.703] GIC-SPI Target CPU: 0 [0001.706] Interrupts Init done [0001.709] calling constructors [0001.712] initializing heap [0001.714] I> Heap: [0xa0691568 ... 0xab000000] [0001.719] initializing threads [0001.722] initializing timers [0001.724] creating bootstrap completion thread [0001.729] top of bootstrap2() [0001.731] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.736] initializing platform [0001.739] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.744] W> device prod register failed [0001.748] I> Bl_dtb @0xaaf00000 [0001.754] W> "plugin-manager" doesn't exist, creating [0001.756] W> "ids" doesn't exist, creating [0001.760] W> "connection" doesn't exist, creating [0001.765] W> "configs" doesn't exist, creating [0001.775] I> Find /i2c@3160000's alias i2c0 [0001.775] I> Reading eeprom i2c=0 address=0x50 [0001.802] I> Device at /i2c@3160000:0x50 [0001.803] I> Reading eeprom i2c=0 address=0x57 [0001.803] E> I2C: slave not found in slaves. [0001.804] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0001.805] E> I2C_DEV: Failed to send register address 0x00000000. [0001.805] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 0. [0001.812] E> eeprom: Failed to read I2C slave device [0001.817] I> Eeprom read failed 0x3526070d [0001.823] I> Find /i2c@c240000's alias i2c1 [0001.825] I> Reading eeprom i2c=1 address=0x50 [0001.831] E> I2C: slave not found in slaves. [0001.834] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.842] E> I2C_DEV: Failed to send register address 0x00000000. [0001.847] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.857] E> eeprom: Retry to read I2C slave device. [0001.861] E> I2C: slave not found in slaves. [0001.865] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.873] E> I2C_DEV: Failed to send register address 0x00000000. [0001.879] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.888] E> eeprom: Failed to read I2C slave device [0001.893] I> Eeprom read failed 0x3526070d [0001.897] I> create_pm_ids: id: 3668-0001-200-G, len: 15 [0001.902] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.913] I> Adding plugin-manager/ids/3668-0001-200=/i2c@3160000:module@0x50 [0001.921] W> "i2c@3160000" doesn't exist, creating [0001.925] W> "module@0x50" doesn't exist, creating [0001.932] I> Adding plugin-manager/cvm [0001.933] W> "chip-id" doesn't exist, creating [0001.938] I> Adding plugin-manager/chip-id/A02P [0001.942] I> Plugin-manager override starting [0001.947] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.956] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.960] I> node /plugin-manager/fragement-tegra-sdhci-sd-dis matches [0001.969] I> Disable plugin-manager status in FDT [0001.969] I> Plugin-manager override finished successfully [0001.974] I> gpio framework initialized [0001.979] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.986] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.993] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0002.000] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.008] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.014] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.020] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0002.028] E> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0002.035] E> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0002.042] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0002.049] I> fixed regulator driver initialized [0002.058] I> register 'maxim' power off handle [0002.059] I> virtual i2c enabled [0002.060] I> registered 'maxim,max20024' pmic [0002.064] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0002.071] I> Boot-device: QSPI [0002.074] I> Boot_device: QSPI_FLASH instance: 0 [0002.079] I> QSPI source rate = 204000 Khz [0002.082] I> Requested rate for QSPI clock = 34000 Khz [0002.087] I> BPMP-set rate for QSPI clk = 34000 Khz [0002.092] I> QSPI Flash Size = 32 MB [0002.100] I> Qspi initialized successfully [0002.100] I> qspi flash-0 params source = boot args [0002.104] I> create_pm_ids: id: 3668-0001-200-G, len: 15 [0002.109] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.124] I> sdmmc-3 params source = safe params [0002.126] I> Found 47 partitions in QSPI_FLASH (instance 0) [0002.146] W> Cannot find any partition table for 00000003 [0002.159] I> Found 11 partitions in SDMMC_USER (instance 3) [0002.167] I> regulator 'vdd-hdmi-5v0' already enabled [0002.172] I> regulator 'vdd-hdmi-5v0' already enabled [0002.172] I> hdmi cable connected [0002.174] W> set volts not configured for 'vdd-1v0' [0002.175] W> set volts not configured for 'vdd-1v8-hs' [0002.178] E> invalid display type [0002.179] E> cannot find any other nvdisp nodes [0002.194] I> edid read success [0002.207] I> edid read success [0002.207] I> width = 640, height = 480, frequency = 25174825 [0002.208] I> width = 640, height = 480, frequency = 25174825 [0002.208] I> width = 640, height = 480, frequency = 25174825 [0002.208] I> width = 640, height = 480, frequency = 25174825 [0002.209] I> width = 1366, height = 768, frequency = 85500000 [0002.212] I> width = 720, height = 576, frequency = 27000000 [0002.218] I> width = 720, height = 480, frequency = 26973026 [0002.223] I> width = 720, height = 480, frequency = 26973026 [0002.229] I> width = 720, height = 576, frequency = 26973026 [0002.234] I> width = 720, height = 576, frequency = 26973026 [0002.240] I> width = 1280, height = 720, frequency = 74175824 [0002.246] I> width = 1280, height = 720, frequency = 74175824 [0002.251] I> width = 1920, height = 1080, frequency = 148351648 [0002.257] I> width = 1920, height = 1080, frequency = 148351648 [0002.263] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.273] I> hdmi_enable, starting HDMI initialisation [0002.278] I> hdmi_enable, HDMI initialisation complete [0002.287] I> Load in CBoot Boot Options partition and parse it [0002.288] E> Error -9 when finding node with path /boot-configuration [0002.291] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.298] I> Hit any key to stop autoboot: 4 3 2 1 [0004.306] initializing target [0004.306] calling apps_init() [0004.307] starting app kernel_boot_app [0004.313] I> found decompressor handler: lz4-legacy [0004.313] I> decompressing BMP blob ... [0004.317] I> Kernel type = Normal [0004.317] I> Loading kernel-bootctrl from partition [0004.317] I> Loading partition kernel-bootctrl at 0xa4ac0000 from device(0x1) [0004.327] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0004.328] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.328] I> ########## SD boot ########## [0004.332] W> Error: failed to get sd-card params [0004.336] I> -0 params source = [0004.339] E> Failed to initialize device 6-0 [0004.343] E> SD boot failed, err: 252641293 [0004.347] I> ########## USB boot ########## [0004.363] I> USB Firmware Version: 60.06 release [0004.418] I> regulator of usb2-0 already enabled [0004.423] I> regulator of usb2-1 already enabled [0004.427] I> regulator of usb2-2 already enabled [0005.493] I> USB 2.0 port 2 new high-speed USB device detected [0005.495] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9f800, cmd_ring.dma = 0xa0e9f840 [0005.596] I> Start to enumerate device [0005.597] W> WARNING: event and command not matching, cmd_trb_ptr = 0xa0e9f800, cmd_ring.dma = 0xa0e9f840 [0005.604] I> [0005.604] I> Enumerated USB Device 0bda:5411 [0005.604] I> [0005.606] I> Hub: [0005.606] I> Downstream ports : 4 [0005.606] I> Power switching : Ganged [0005.606] I> Compound device : No [0005.607] I> Over-current protection : Global [0005.609] I> Hub avg delay : 4 ns [0005.613] I> Set interface = 1 (alt setting) [0005.618] I> Enable hub ports [0005.627] I> Device detected on port 3 [0005.628] I> Device detected on port 4 [0006.139] I> Reset port 3 [0006.193] I> Port 3 device is low speed, skip enumeration [0006.196] I> Reset port 4 [0006.250] I> Port 4 device is low speed, skip enumeration [0006.251] E> Enumerated device doesn't belong to MSD class or protocol is not bulk-only!! [0006.251] E> USBMSD: Failed to initialize Enumerated USB device either not an MSD device or supported protoco[0006.252] E> USBMSD: Failed to open usbmsd open, 0. [0006.253] E> Error opening USBMSD driver 0, err: 7c7c0312 [0006.258] E> Failed to initialize device 5-0 [0006.262] E> USB boot failed, err: 2088502034 [0006.266] I> ########## Fixed storage boot ########## [0006.271] I> Already published: 00010003 [0006.275] I> Look for boot partition [0006.278] I> Fallback: assuming 0th partition is boot partition [0006.284] I> Detect filesystem [0006.311] I> Loading extlinux.conf ... [0006.312] I> rootfs path: /sdmmc_user/boot/extlinux/extlinux.conf [0006.348] I> L4T boot options [0006.349] I> [1]: "primary kernel" [0006.349] I> Enter choice: [0009.350] I> Continuing with default option: 1 [0009.350] I> Loading kernel sig file from rootfs ... [0009.350] I> rootfs path: /sdmmc_user/boot/Image.sig [0009.369] I> Loading kernel binary from rootfs ... [0009.369] I> rootfs path: /sdmmc_user/boot/Image [0009.784] I> Validate kernel ... [0009.785] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0010.097] E> digest on binary did not match!! [0010.097] C> OEM authentication of kernel payload failed! [0010.097] W> Failed to validate kernel binary (err=1077936152, fail=0) [0010.098] W> Security fuse not burned, ignore validation failure [0010.105] I> No kernel-dtb binary path [0010.105] I> A/B: bin_type (38) slot 1 [0010.106] I> Loading kernel-dtb_b from partition [0010.106] I> Loading partition kernel-dtb_b at 0x91000000 from device(0x1) [0010.123] I> Validate kernel-dtb ... [0010.123] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0010.126] I> Loading ramdisk from rootfs ... [0010.127] I> rootfs path: /sdmmc_user/boot/initrd [0010.208] I> Kernel hdr @0xa4ac0000 [0010.208] I> Kernel dtb @0x90000000 [0010.208] I> decompressor handler not found [0010.208] I> Copying kernel image (34408456 bytes) from 0xa4ac0000 to 0x80080000 ... [0010.219] I> Done [0010.219] I> Updated bpmp info to DTB [0010.220] I> Ramdisk: Base: 0x92000000; Size: 0x54ec8f [0010.221] I> Updated initrd info to DTB [0010.221] W> WARN: Fail to override "console=none" in commandline [0010.222] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0010.228] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0010.235] I> Active slot suffix: _b [0010.238] I> add_boot_slot_suffix: slot_suffix = _b ot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0010.273] I> Updated bootarg info to DTB [0010.277] W> MAC addr invalid! [0010.280] E> Failed to get WIFI MAC address [0010.284] W> MAC addr invalid! [0010.286] E> Failed to get Bluetooth MAC address [0010.291] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:05:c5:d2 [0010.297] W> "plugin-manager" doesn't exist, creating [0010.302] I> Adding /chosen/plugin-manager/cvm [0010.306] W> "chip-id" doesn't exist, creating [0010.310] I> Adding /chosen/plugin-manager/chip-id [0010.315] W> "configs" doesn't exist, creating [0010.319] I> Adding /chosen/plugin-manager/configs [0010.324] W> "ids" doesn't exist, creating [0010.328] I> Adding /chosen/plugin-manager/ids [0010.332] W> "odm-data" doesn't exist, creating [0010.337] I> Adding /chosen/plugin-manager/odm-data [0010.344] W> "memory" doesn't exist, creating [0010.346] I> [0] START: 0x80000000, END: 0xac000000 [0010.350] I> [1] START: 0xac004000, END: 0xf09d0000 [0010.355] I> [2] START: 0xf09dc000, END: 0xf09e0000 [0010.360] I> dram_block larger than 80000000 [0010.364] I> [3] START: 0x100000000, END: 0x280000000 [0010.369] I> added [base:0x80000000, size:0x2c000000] to /memory [0010.375] I> added [base:0xac200000, size:0x44600000] to /memory [0010.380] I> added [base:0x100000000, size:0x180000000] to /memory [0010.387] I> Updated memory info to DTB [0010.390] E> add_disp_param: failed to get display params for du=1 [0010.396] W> "reset" doesn't exist, creating [0010.401] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0010.405] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0010.410] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0010.414] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0010.419] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0010.424] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0010.429] I> Deleted cpu@6 node in DT [0010.432] I> Deleted cpu@7 node in DT [0010.436] I> Deleted cluster3 node in FDT [0010.440] I> Update arm-pmu in FDT [0010.443] I> - update property: interrupts [0010.447] I> - update property: interrupt-affinity [0010.452] W> "misc-data" doesn't exist, creating [0010.456] I> Boot-device: QSPI [0010.459] W> Unknown boot device [0010.462] I> Add storage-qspi to plugin-manager/misc-data [0010.467] W> Unknown storage device [0010.471] I> Add serial number:1421720026747 as DT property [0010.477] I> Plugin-manager override starting [0010.480] I> node /plugin-manager/fragment-pcie-c5-rp matches [0010.487] I> node /plugin-manager/fragement-tegra-wdt-en matches [0010.493] I> node /plugin-manager/fragement-tegra-sdhci-sd-dis matches [0010.500] I> Disable plugin-manager status in FDT [0010.502] I> Plugin-manager override finished successfully [0010.508] I> tegrabl_load_kernel_and_dtb: Done [0010.530] I> QSPI: erasing sectors from 176 - 176 [0010.530] I> QSPI: recoverying tail blocks from 22536 - 22656 [0011.175] I> QSPI: erasing sectors from 177 - 177 [0011.175] I> QSPI: recoverying tail blocks from 22664 - 22784 [0011.829] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (root@lv) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #8 SMP PREEMPT Mon May 11 11:01:35 CST 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069c000 [ 0.000000] Found lut_mem: 00002008@a0698000 ??RNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: pll_d2 has no dyn ramp WARNING: at platform/drivers/pg/pg-gpu-t194.c:185 WARNING: at platform/drivers/pg/pg-gpu-t194.c:185 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 WARNING: at platform/drivers/pg/pg-cv-t194.c:73 ?? 1.977911] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.977958] imx219 9-0010: board setup failed [ 2.001887] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.001935] imx219 10-0010: board setup failed bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell [END] 2021/5/21 11:10:33