## Test config file for BurnInTest Linux command line version ## Use '#' to comment out lines, remove the comment to enable an option ## Double ## have been used for explanations of each section/paramter ## Single # have been used to comment out optional paramters/tests ## Note that only 14 lines of tests can be displayed on the main window ## due to console size limits ## Logging ## Comment out the section to turn logging off ## Location (path) of log file LogFilename /tmp/ ## Log prefix LogPrefix BiTLog2 ## Format - Ascii|HTML|Certificate Format Ascii ## Logging detail level - summary|normal LogDetailLevel normal ## Trace level - None (0) | Activity Trace 1 (1)| Activity Trace 2 (2) TraceLevel 0 ##maximum number of lines for file MaxFileLines 1000 ## Logging mode - single file or multiples with timestamp ## - ClearAppend Clear results & append (single file) ## - AccumulateAppend Clear results & append (single file) ## - ClearNew Clear results and overwrite existing (single file) ## - Timestamp Create new timestamped files (multiple files) LogMode ClearAppend ## Pre Test Action # ##Action before tests start - None, Warn and ExternalWait - currently only None and ExternalWait are valid #Action ##If using ExternalWait this is the path of the file or script to launch and wait for the end of it's execution #ExternalPath /path/to/file # ## Post Test Action # ##Auto stop action when tests have passed Stop, RunApp, Reboot #AutoStopPassed Stop ##Manual stop action when tests have passed Stop, RunApp #ManualStopPassed Stop ##If using AutoStopPassed RunApp this is the path of the file or script to launch before exiting #ExternalPathPassed /path/to/file ##If using AutoStopPassed RunApp this is the parameters to pass to the application being launched #ExternalParamsPassed paramters #UseSystemBeepPassed #DisplayResultsPassed ##Auto stop action when tests have failed Stop, RunApp, Reboot #AutoStopFailed Stop ##Manual stop action when tests have failed Stop, RunApp #ManualStopFailed Stop ##If using AutoStopPassed RunApp this is the path of the file or script to launch before exiting #ExternalPathFailed /path/to/file ##If using AutoStopPassed RunApp this is the parameters to pass to the application being launched #ExternalParamsFailed paramters #UseSystemBeepFailed #DisplayResultsFailed # # ## CustomerName #CustomerName Name ## TechnicianName #TechnicianName Name ## MachineType - One line description of the machine type #MachineType Type ## MachineSerial - Custom serial for this machine #MachineSerial Serial1234 ## MachineID - Management console machine ID. Needs to be a minimum of 8 characters, maximum of 15 #MachineID Test1234 ## Notes - Ones line description of extra notes #Notes One line of notes # ## Duty cycles ## Auto stop after XXX minutes AutoStopMinutes 15 ## Auto stop after XXX cycles AutoStopCycles 0 ## Duty cycle load for each test, 1-100 CPU 100 CDDVD 100 Memory 100 Serial 100 Disk 100 Network 100 USB 100 Sound 100 ## Memory section #Test pattern - Cycle, Sequence, Binary1, Binary2, Zeros, Ones Cycle ## Disk section - Have a section for each device to test ## Global disk test settings ##TestAllDisks - Test all detected partitions, uncomment to use #TestAllDisks ##TestAllRAWDisks - Test all detected RAW (unpartitioned) disks, uncomment to use #TestAllRAWDisks ##When using Test all - File size as % of disk space 1-15% #FileSize 1 ##When using Test all - Cyclic, Sequential, HighLow, Binary1, Binary2, Zeros, Ones, Random, RandomSeeking #TestMode Cyclic ## Individual disk settings ## Test a device ## The device to be tested Device /dev/sda1 ## The test mode - Cyclic, Sequential, HighLow, Binary1, Binary2, Zeros, Ones, Random, RandomSeeking TestMode Cyclic ##File size as % of disk space 1-15% FileSize 1 ## Duty cycle override, 0 - 100 #DutyCycleOverride 0 ## Seek count #SeekCount 100 ##CPU-Math ##Comment out the matching test name if you don't want the tests run ##General Operations Test General ##Floating Point Unit test FPU ##Extension instructions - NEON NEON ##Prime Number Test Prime ## Network ## Have an IP keyword (up to 4) for each destination IP to test. The IP specified should be an address external ## to the system under test that can respond to ping requests. IP 127.0.0.1 ## Bad packet ratio ## - Set to 0 for every bad packet to generate and error ## - Set to a 1-99 range for an error to be generated once the bad packet ratio reaches this level BadPacketRatio 2 ## Timeout - ms time before connection times out, 100 - 200000 TimeOut 2000 ## Uncomment TestAllNICs to bind each entered IP to a different network card #TestAllNICs ## CD-RW/DVD - Have a section for each device to test # # ## Device to test #Device /dev/hdc ## Test mode - Music CD playback (Music), Data CD Read and Verify (Data), PassMark Test CD/DVD (Passmark), No CD (No) #TestMode Passmark ## Additional seek - uncomment and edit the seek value if necessary, only valid for PassMark Test CD/DVD 0-1000 #Seek 100 # ## Device to test #Device /dev/hdd ## Test mode - Music CD playback (Music), Data CD Read and Verify (Data), PassMark## Test CD/DVD (Passmark), No CD (No) #TestMode Music ## Additional seek - uncomment and edit the seek value if necessary, only valid for PassMark Test CD/DVD 0-1000 #Seek 100 # # ## Serial Port - Have a section for each device to test # # ## Device to test - ttys0, ttys1 etc to ttys63 #Device ttys0 ## Test Mode - Loopback or Detect #TestMode Loopback # # ## Device to test - ttys0, ttys1 etc to ttys63 #Device ttys1 ## Test Mode - Loopback or Detect #TestMode Detect # ## Disable RTS/CTS and DSR/DTR #DisableRTS ## Send and receive timeout, 100-30000 ms #SendReceive 3500 ## Baud rate - 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, ## Cycle to 115200 (Cycle115), 230400, Cycle to 230400 (Cycle230), 460800,921600 #BaudRate 115200 # ## USB test section # #NumUSB 2 #RunUSB2Benchmark # ## Sound section # ## Maximum distortion allowed before and error is logged, allowed values 1-20 #MaxDistortion 5 ## Sound device name to test - plughw, default or other sound alias, should be left as plughw in most cases #SoundDevName plughw # ##Plugin tests ##Uncomment 'RunSeparately' and 'IgnoreTimeout' when required and have section for each plugin to run (up to 5 ) # ##Run each plugin separately (default will run at the same time) #RunSeparately ##Ignore no-operations timeout #IgnoreTimeout # ## Enter the path of the plugin application to run here #Path /path/to/plugin ## Uncomment 'PreTest' to run as a pre test plugin #PreTest # # ## Errors ## Action to take on error - Continue (Continue), Beep and continue (Beep), Stop tests (Stop) ActionOnError Continue ## Management Console # ##Management console server address eg http://localhost/htdocs/mgtconsolemsghandler.php #Server http://192.168.2.2/bitconsole/mgtconsolemsghandler.php ## HTTP authentication username #Username user ## HTTP authentication password #Password passwd #