[0000.274] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-03715cad) [0000.282] I> Boot-device: eMMC [0000.289] I> sdmmc bdev is already initialized [0000.294] I> pmic: reset reason (nverc) : 0x44 [0000.327] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.347] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.353] W> No valid slot number is found in scratch register [0000.359] W> Return default slot: _a [0000.362] I> A/B: bin_type (16) slot 0 [0000.366] I> Loading partition bpmp-fw at 0xd7800000 [0000.371] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.376] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.401] I> Binary(16) of size 534416 is loaded @ 0xd7800000 [0000.406] W> No valid slot number is found in scratch register [0000.412] W> Return default slot: _a [0000.415] I> A/B: bin_type (17) slot 0 [0000.419] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.424] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.430] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.455] I> Binary(17) of size 604720 is loaded @ 0xd796c400 [0000.684] I> Loading SCE-FW ... [0000.688] W> No valid slot number is found in scratch register [0000.693] W> Return default slot: _a [0000.697] I> A/B: bin_type (12) slot 0 [0000.700] I> Loading partition sce-fw at 0xd7300000 [0000.705] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.710] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.730] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.735] I> Init SCE [0000.738] I> Loading APE-FW ... [0000.741] W> No valid slot number is found in scratch register [0000.746] W> Return default slot: _a [0000.750] I> A/B: bin_type (11) slot 0 [0000.753] I> Loading partition adsp-fw at 0xd7400000 [0000.758] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.764] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.783] I> Binary(11) of size 77216 is loaded @ 0xd7400000 [0000.788] I> Copy BTCM section [0000.791] W> No valid slot number is found in scratch register [0000.797] W> Return default slot: _a [0000.800] I> A/B: bin_type (13) slot 0 [0000.804] I> Loading partition cpu-bootloader at 0x96000000 [0000.810] I> Reading two headers - addr:0x96000000 blocks:1 [0000.815] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.836] I> Binary(13) of size 302064 is loaded @ 0x96000000 [0000.842] W> No valid slot number is found in scratch register [0000.847] W> Return default slot: _a [0000.851] I> A/B: bin_type (20) slot 0 [0000.854] I> Loading partition bootloader-dtb at 0x8520f400 [0000.860] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.865] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.887] I> Binary(20) of size 374528 is loaded @ 0x8520f400 [0000.893] W> No valid slot number is found in scratch register [0000.898] W> Return default slot: _a [0000.902] I> A/B: bin_type (14) slot 0 [0000.905] I> Loading partition secure-os at 0x8530f600 [0000.911] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.916] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.938] I> Binary(14) of size 394672 is loaded @ 0x8530f600 [0000.946] I> TOS boot-params @ 0x85000000 [0000.950] I> TOS params prepared [0000.953] I> Loading EKS ... [0000.955] I> A/B: bin_type (15) slot 0 [0000.959] I> Loading partition eks at 0x8590f800 [0000.963] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.969] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0000.988] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0000.993] I> EKB detected (length: 0x400) @ 0x8590f800 [0000.998] I> Copied encrypted keys [0001.002] I> boot profiler @ 0x275844000 [0001.006] I> boot profiler for TOS @ 0x275844000 [0001.011] I> Unhalting SCE [0001.013] I> Primary Memory Start:80000000 Size:70000000 [0001.018] I> Extended Memory Start:f0110000 Size:1856f0000 [0001.025] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):5b49e7f80 NOTICE: BL31: Built : 14:43:06, Jan 15 2021 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 197: key_mgnt_processing ....... hwkey-agent: 189: Setting EKB key 0 to slot 14 hwkey-agent: 167: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.398] I> Welcome to Cboot [0001.400] I> Cboot Version: t186-28749d1d [0001.404] I> CPU-BL Params @ 0x275800000 [0001.408] I> 0) Base:0x00000000 Size:0x00000000 [0001.412] I> 1) Base:0x277f00000 Size:0x00100000 [0001.417] I> 2) Base:0x277e00000 Size:0x00100000 [0001.421] I> 3) Base:0x277d00000 Size:0x00100000 [0001.426] I> 4) Base:0x277c00000 Size:0x00100000 [0001.430] I> 5) Base:0x277b00000 Size:0x00100000 [0001.435] I> 6) Base:0x277800000 Size:0x00200000 [0001.439] I> 7) Base:0x277400000 Size:0x00400000 [0001.444] I> 8) Base:0x277a00000 Size:0x00100000 [0001.449] I> 9) Base:0x277300000 Size:0x00100000 [0001.453] I> 10) Base:0x276800000 Size:0x00800000 [0001.458] I> 11) Base:0x30000000 Size:0x00040000 [0001.462] I> 12) Base:0xf0000000 Size:0x00100000 [0001.466] I> 13) Base:0x30040000 Size:0x00001000 [0001.471] I> 14) Base:0x30048000 Size:0x00001000 [0001.475] I> 15) Base:0x30049000 Size:0x00001000 [0001.480] I> 16) Base:0x3004a000 Size:0x00001000 [0001.484] I> 17) Base:0x3004b000 Size:0x00001000 [0001.489] I> 18) Base:0x3004c000 Size:0x00001000 [0001.493] I> 19) Base:0x3004d000 Size:0x00001000 [0001.497] I> 20) Base:0x3004e000 Size:0x00001000 [0001.502] I> 21) Base:0x3004f000 Size:0x00001000 [0001.506] I> 22) Base:0x00000000 Size:0x00000000 [0001.511] I> 23) Base:0xf0100000 Size:0x00010000 [0001.515] I> 24) Base:0x00000000 Size:0x00000000 [0001.520] I> 25) Base:0x00000000 Size:0x00000000 [0001.524] I> 26) Base:0x00000000 Size:0x00000000 [0001.528] I> 27) Base:0x00000000 Size:0x00000000 [0001.533] I> 28) Base:0x84400000 Size:0x00400000 [0001.537] I> 29) Base:0x30000000 Size:0x00010000 [0001.542] I> 30) Base:0x278000000 Size:0x08000000 [0001.546] I> 31) Base:0x00000000 Size:0x00000000 [0001.551] I> 32) Base:0x276000000 Size:0x00600000 [0001.555] I> 33) Base:0x80000000 Size:0x70000000 [0001.560] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.564] I> 35) Base:0x00000000 Size:0x00000000 [0001.569] I> 36) Base:0x00000000 Size:0x00000000 [0001.573] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.578] I> 38) Base:0x84000000 Size:0x00400000 [0001.582] I> 39) Base:0x96000000 Size:0x02000000 [0001.586] I> 40) Base:0x85000000 Size:0x01200000 [0001.591] I> 41) Base:0x275800000 Size:0x00500000 [0001.595] I> 42) Base:0x00000000 Size:0x00000000 [0001.600] I> 43) Base:0x00000000 Size:0x00000000 [0001.604] GIC-SPI Target CPU: 4 [0001.608] Interrupts Init done [0001.611] calling constructors [0001.614] initializing heap [0001.617] initializing threads [0001.620] initializing timers [0001.623] creating bootstrap completion thread [0001.628] top of bootstrap2() [0001.631] CPU: ARM Cortex A57 [0001.634] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.639] initializing platform [0001.642] I> Bl_dtb @0x8520f400 [0001.645] I> gpio framework initialized [0001.652] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.662] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.669] I> GPIO framework and drivers are initialized. [0001.675] I> Boot-device: eMMC [0001.682] I> sdmmc bdev is already initialized [0001.712] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.730] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.735] W> opt-in fuse is not set, skip fuse_burning [0001.740] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.746] W> No valid slot number is found in scratch register [0001.752] W> Return default slot: _a [0001.761] I> A/B: bin_type (21) slot 0 [0001.765] I> Loading kernel-dtb from partition [0001.769] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.786] I> Kernel_dtb @0x80000000 [0001.790] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.800] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.807] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.816] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' driver [0001.827] I> fixed regulator driver initialized [0001.860] I> register 'maxim' power off handle [0001.866] I> virtual i2c enabled [0001.869] I> registered 'maxim,max77620' pmic [0001.873] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.887] I> Find /i2c@c250000's alias i2c7 [0001.891] I> Reading eeprom i2c=7 address=0x50 [0001.920] I> Device at /i2c@c250000:0x50 [0001.924] I> Reading eeprom i2c=7 address=0x57 [0001.952] I> Device at /i2c@c250000:0x57 [0001.957] I> Find /i2c@c240000's alias i2c1 [0001.961] I> Reading eeprom i2c=1 address=0x51 [0001.966] E> I2C: slave not found in slaves. [0001.970] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0001.978] E> I2C_DEV: Failed to send register address 0x00000000. [0001.984] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0001.993] E> eeprom: Retry to read I2C slave device. [0001.998] E> I2C: slave not found in slaves. [0002.002] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.010] E> I2C_DEV: Failed to send register address 0x00000000. [0002.016] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.025] E> eeprom: Failed to read I2C slave device [0002.030] I> Eeprom read failed 0x3526070d [0002.035] I> Find /i2c@3160000's alias i2c0 [0002.039] I> Reading eeprom i2c=0 address=0x50 [0002.043] E> I2C: slave not found in slaves. [0002.047] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.055] E> I2C_DEV: Failed to send register address 0x00000000. [0002.061] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0002.070] E> eeprom: Failed to read I2C slave device [0002.075] I> Eeprom read failed 0x3526070d [0002.080] I> Find /i2c@3180000's alias i2c2 [0002.084] I> Reading eeprom i2c=2 address=0x54 [0002.088] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.119] I> Disabling gpio chip_id = 2, gpio pin = 9 [0002.124] I> Device at /i2c@3180000:0x54 [0002.128] I> Reading eeprom i2c=2 address=0x57 [0002.132] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.137] E> I2C: slave not found in slaves. [0002.142] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.149] E> I2C_DEV: Failed to send register address 0x00000000. [0002.155] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 2. [0002.165] E> eeprom: Failed to read I2C slave device [0002.169] I> Disabling gpio chip_id = 2, gpio pin = 9 [0002.175] I> Eeprom read failed 0x00000000 [0002.178] I> create_pm_ids: id: 3310-1000-D00-L, len: 15 [0002.184] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.195] I> create_pm_ids: id: 2597-0000-900-E, len: 15 [0002.200] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.211] I> create_pm_ids: id: 3326-1000-000-M, len: 15 [0002.216] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0002.251] I> enabling 'vdd-hdmi' regulator [0002.266] I> regulator 'vdd-hdmi' already enabled [0002.271] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.277] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.286] E> cannot find any other nvdisp nodes [0002.291] E> no valid display unit config found in dtb [0002.296] W> display init failed [0002.299] initializing target [0002.303] calling apps_init() [0002.306] starting app kernel_boot_app [0002.329] I> found decompressor handler: lz4-legacy [0002.334] I> decompressing BMP blob ... [0002.346] I> Kernel type = Normal [0002.350] I> Loading kernel-bootctrl from partition [0002.354] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.371] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.378] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.385] I> ########## Fixed storage boot ########## [0002.389] W> No valid slot number is found in scratch register [0002.395] W> Return default slot: _a [0002.398] I> A/B: bin_type (24) slot 0 [0002.414] I> Boot image size read from image header: 97de5 [0002.419] I> Boot image load address: 0x80400000 [0002.424] I> Loading kernel from partition [0002.428] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.476] I> Validate kernel ... [0003.479] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.487] I> Checking boot.img header magic ... [0003.492] I> [OK] [0003.493] I> kernel-dtb is already loaded [0003.497] I> Validate kernel-dtb ... [0003.501] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.508] I> Kernel hdr @0x80400000 [0003.511] I> Kernel dtb @0x80000000 [0003.515] I> decompressor handler not found [0003.519] I> Copying kernel image (622053 bytes) from 0x80400800 to 0x80600000 ... [0003.526] I> Done [0003.528] I> Move ramdisk (len: 0) from 0x80498800 to 0x947d0000 [0003.535] I> Updated bpmp info to DTB [0003.542] I> Ramdisk: Base: 0x947d0000; Size: 0x0 [0003.546] I> Updated initrd info to DTB [0003.550] W> WARN: Fail to override "console=none" in commandline [0003.556] I> Active rootfs suffix: [0003.559] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.566] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.573] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.581] I> disabled_core_mask: 0xffffff0c [0003.585] W> No valid slot number is found in scratch register [0003.590] W> Return default slot: _a [0003.594] I> Active slot suffix: [0003.597] I> add_boot_slot_suffix: slot_suffix = [0003.601] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=PARTUUID=8363108c-d01b-49b1-ba0a-f6aa8a4202f8 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.652] I> Updated bootarg info to DTB [0003.655] I> eeprom_get_mac_addr: MAC (type: 0): 48:b0:2d:0f:4d:6b [0003.662] I> eeprom_get_mac_addr: MAC (type: 1): 48:b0:2d:0f:4d:6c [0003.668] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:0f:4d:6d [0003.674] E> Found no plugin manager ids in source DT [0003.679] W> Add plugin manager ids from board info [0003.684] W> "plugin-manager" doesn't exist, creating [0003.689] W> "ids" doesn't exist, creating [0003.693] W> "connection" doesn't exist, creating [0003.697] W> "configs" doesn't exist, creating [0003.702] I> create_pm_ids: id: 3310-1000-D00-L, len: 15 [0003.707] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.718] I> create_pm_ids: id: 2597-0000-900-E, len: 15 [0003.723] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.734] I> create_pm_ids: id: 3326-1000-000-M, len: 15 [0003.739] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93 [0003.750] I> Adding plugin-manager/ids/3310-1000-D00=/i2c@c250000:module@0x50 [0003.757] W> "i2c@c250000" doesn't exist, creating [0003.762] W> "module@0x50" doesn't exist, creating [0003.767] I> Adding plugin-manager/ids/2597-0000-900=/i2c@c250000:module@0x57 [0003.774] W> "module@0x57" doesn't exist, creating [0003.779] I> Adding plugin-manager/ids/3326-1000-000=/i2c@3180000:module@0x54 [0003.786] W> "i2c@3180000" doesn't exist, creating [0003.791] W> "module@0x54" doesn't exist, creating [0003.798] I> Adding plugin-manager/ids/3310-1000-D00-L [0003.805] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.810] I> Adding plugin-manager/configs/3310-power-config 00 [0003.816] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.822] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.828] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.834] I> Adding plugin-manager/configs/3310-display-config 00 [0003.840] I> Adding plugin-manager/cvm [0003.844] W> "chip-id" doesn't exist, creating [0003.848] I> Adding plugin-manager/chip-id/A02P [0003.853] W> "odm-data" doesn't exist, creating [0003.858] I> Adding /chosen/plugin-manager/odm-data [0003.867] I> added [base:0x80000000, size:0x70000000] to /memory [0003.873] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.879] I> added [base:0x275e00000, size:0x200000] to /memory [0003.885] I> added [base:0x276600000, size:0x200000] to /memory [0003.891] I> added [base:0x277000000, size:0x200000] to /memory [0003.896] I> Updated memory info to DTB [0003.901] E> add_disp_param: failed to get display params for du=0 [0003.909] W> "reset" doesn't exist, creating [0003.913] W> "pmc-reset-reason" doesn't exist, creating [0003.919] W> "pmic-reset-reason" doesn't exist, creating [0003.925] I> Adding ecid(00000001646e158614000000110501c0) to DT [0003.931] I> disabled_core_mask: 0xffffff0c [0003.943] I> Add serial number:1422520039069 as DT property [0003.952] I> Plugin-manager override starting [0003.958] I> node /plugin-manager/fragement@0 matches [0003.968] I> node /plugin-manager/fragement@4 matches [0003.981] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0004.001] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0004.010] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0004.019] I> node /plugin-manager/fragment-devslp@0 matches [0004.032] I> node /plugin-manager/fragment-500-pcie-config matches [0004.046] I> node /plugin-manager/fragment-500-xusb-config matches [0004.069] I> node /plugin-manager/fragment-p3310-c00-comm matches [0004.083] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0004.094] I> node /plugin-manager/fragment-p3310-c01 matches [0004.107] I> node /plugin-manager/fragment-p3310-c03 matches [0004.141] I> node /plugin-manager/fragment-e3326@0 matches [0004.223] I> node /plugin-manager/fragment-p3310-c00-camera matches [0004.250] I> Disable plugin-manager status in FDT [0004.255] I> Plugin-manager override finished successfully [0004.260] I> tegrabl_load_kernel_and_dtb: Done [0004.264] E> tegrabl_display_clear: display is not initialized [0004.270] W> Boot logo display failed... [0004.274] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2020.04-g6b630d64fd (Jan 15 2021 - 14:41:30 -0800) SoC: tegra186 Model: NVIDIA P2771-0000-500 Board: NVIDIA P2771-0000 DRAM: 7.8 GiB MMC: sdhci@3400000: 1, sdhci@3460000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: Warning: ethernet@2490000 using MAC address from ROM eth0: ethernet@2490000 Hit any key to stop autoboot: 2  1  0 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 734 bytes read in 44 ms (15.6 KiB/s) 1: primary kernel Retrieving file: /boot/initrd 7236790 bytes read in 823 ms (8.4 MiB/s) Retrieving file: /boot/Image 34338824 bytes read in 3790 ms (8.6 MiB/s) append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=PARTUUID=8363108c-d01b-49b1-ba0a-f6aa8a4202f8 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 isolcpus=1-2 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 quiet ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) ERROR: reserving fdt memory region failed (addr=0 size=0) Using Device Tree in place at 0000000080000000, end 0000000080060699 copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000... copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000... Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.201-tegra (buildbrain@mobile-u64-4551) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Fri Jan 15 14:54:23 PST 2021 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 3.533442] cgroup: cgroup2: unknown option "nsdelegate" [ 5.820916] random: crng init done [ 5.824320] random: 7 urandom warning(s) missed due to ratelimiting [ 11.594909] using random self ethernet address [ 11.602355] using random host ethernet address [ 14.252689] using random self ethernet address [ 14.257401] using random host ethernet address [ 17.539468] CPU1: shutdown [ 17.588054] CPU2: shutdown Ubuntu 18.04.5 LTS nvidia-sd-card ttyS0 nvidia-sd-card login: