nvidia@Jetson:~$ sudo nvbootctrl -t rootfs dump-slots-info [sudo] password for nvidia: Current rootfs slot: A Active rootfs slot: A num_slots: 2 slot: 0, retry_count: 3, status: normal slot: 1, retry_count: 3, status: normal nvidia@Jetson:~$ sudo rm -rf /lib nvidia@Jetson:~$ �� [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.5.0.0-t194-41334769-d9272b5a) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x2 [0000.061] I> rst_source: 0x0, rst_level: 0x0 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.107] I> Temperature = 33000 [0000.110] W> Skipping boost for clk: BPMP_CPU_NIC [0000.115] W> Skipping boost for clk: BPMP_APB [0000.119] W> Skipping boost for clk: AXI_CBB [0000.123] W> Skipping boost for clk: AON_CPU_NIC [0000.127] W> Skipping boost for clk: CAN1 [0000.131] W> Skipping boost for clk: CAN2 [0000.135] I> Boot-device: QSPI (instance: 0) [0000.139] I> Qspi flash params source = mb1bct [0000.143] I> Qspi clock source : pllc_out0 [0000.147] I> Qspi-0 reinitialized [0000.150] I> Qspi flash params source = mb1bct [0000.163] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.170] W> Thermal config not found in BCT [0000.178] W> MEMIO rail config not found in BCT [0000.190] I> Qspi flash params source = mb1bct [0000.203] I> Qspi flash params source = mb1bct [0000.237] I> Qspi flash params source = mb1bct [0000.801] I> Qspi flash params source = mb1bct [0000.818] I> Qspi flash params source = mb1bct [0000.857] W> Platform config not found in BCT [0000.884] I> Qspi flash params source = mb1bct [0000.910] I> MB1 done ����main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init �� [0000.919] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-78ae5a2a) [0000.920] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.920] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.921] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.927] W> device prod register failed [0000.930] I> gpio framework initialized [0000.934] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.941] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.949] I> No valid sdcard_params in mb1_bct [0000.953] I> Boot_device: QSPI_FLASH instance: 0 [0000.958] I> qspi flash-0 params source = boot args [0000.963] I> QSPI-0l initialized successfully [0000.967] I> sdmmc-3 params source = safe params [0001.406] I> sdmmc DDR50 mode [0001.424] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.441] W> Cannot find any partition table for 00000003 [0001.442] > PARTITION_MANAGER: Failed to publish partition. [0001.458] I> Found 23 partitions in SDMMC_USER (instance 3) [0001.459] I> Active Boot chain : 0 [0002.141] I> Relocating BR-BCT [0002.142] > DEVICE_PROD: device prod is not initialized. [0002.454] I> Relocating OP-TEE dtb from: 0x6bfff240 to 0x70050000, size: 1008 [0002.454] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.455] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.455] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.456] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.456] I> dram_block larger than 80000000 [0002.459] I> [4] START: 0x100000000, SIZE: 0x380000000 [0002.470] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.473] I> found decompressor handler: lz4 [0002.865] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.867] I> Setting EKB blob info to OPTEE dtb finished. ��NOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:29, Jan 24 2023 I/TC: �� bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ��I/TC: Non-��clk_early initialized ��secur��mail_early initialized ��e��fuse initialized hwwdt initialized �� exte��t194_ec_get_ec_list: found 45 ecs ��rnal DT fo��ec initialized ��u��vmon_setup_monitors: found 3 monitors vmon initialized ��adc initialized fmon_populate_monitors: found 73 monitors �� ��fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ��I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:��clk_dt_late initialized ��2��noc_late initialized pm_post initialized dbells initialized ��0:4��dmce initialized ��2��cvc initialized �� UTC 2023 aa��avfs_clk_mach_post initialized ��rch64��avfs_clk_platform_post initialized �� ��cvc_late initialized regulator_post initialized ��I/��rm initialized console_late initialized clk_dt_post initialized mc_reg initialized ��TC: WARNING: This OP-TEE configuration��pg_post initialized profile initialized fuse_late initialized extras_post initialized entering main console loop ] bpmp: init complete �� might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot �� [0003.494] I> Welcome to NVDisp-Init [0003.495] I> NVDisp-Init version: t194-709c0123 [0003.495] I> CPU-BL Params @ 0xca020000 [0003.495] I> 0) Base:0x00000000 Size:0x00000000 [0003.496] I> 1) Base:0xc8300000 Size:0x00100000 [0003.496] I> 2) Base:0xc9800000 Size:0x00200000 [0003.496] I> 3) Base:0xc8600000 Size:0x00200000 [0003.499] I> 4) Base:0xc8200000 Size:0x00100000 [0003.503] I> 5) Base:0xc8100000 Size:0x00100000 [0003.508] I> 6) Base:0xc9400000 Size:0x00400000 [0003.512] I> 7) Base:0xc9000000 Size:0x00400000 [0003.517] I> 8) Base:0xc8000000 Size:0x00100000 [0003.521] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.526] I> 10) Base:0xca800000 Size:0x00800000 [0003.530] I> 11) Base:0x40000000 Size:0x00040000 [0003.534] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.539] I> 13) Base:0x40046000 Size:0x00002000 [0003.543] I> 14) Base:0x40048000 Size:0x00002000 [0003.548] I> 15) Base:0xaf000000 Size:0x00004000 [0003.552] I> 16) Base:0x4004a000 Size:0x00002000 [0003.557] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.561] I> 18) Base:0x4004c000 Size:0x00002000 [0003.566] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.570] I> 20) Base:0x4004e000 Size:0x00002000 [0003.575] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.579] I> 22) Base:0x00000000 Size:0x00000000 [0003.584] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.588] I> 24) Base:0xcc000000 Size:0x02000000 [0003.593] I> 25) Base:0x40050000 Size:0x00002000 [0003.597] I> 26) Base:0x40040000 Size:0x00006000 [0003.601] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.606] I> 28) Base:0xc8400000 Size:0x00200000 [0003.610] I> 29) Base:0xc8800000 Size:0x00400000 [0003.615] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.619] I> 31) Base:0x00000000 Size:0x00000000 [0003.624] I> 32) Base:0xf8000000 Size:0x08000000 [0003.628] I> 33) Base:0xce000000 Size:0x2a000000 [0003.633] I> 34) Base:0xcb000000 Size:0x01000000 [0003.637] I> 35) Base:0xae000000 Size:0x01000000 [0003.642] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.646] I> 37) Base:0xca000000 Size:0x00800000 [0003.651] I> 38) Base:0x80000000 Size:0x20000000 [0003.655] I> 39) Base:0xb0000000 Size:0x08000000 [0003.659] I> 40) Base:0x00000000 Size:0x00000000 [0003.664] I> 41) Base:0x00000000 Size:0x00000000 [0003.668] I> 42) Base:0x00000000 Size:0x00000000 [0003.673] I> 43) Base:0x00000000 Size:0x00000000 [0003.677] I> 44) Base:0x00000000 Size:0x00000000 [0003.682] I> 45) Base:0x00000000 Size:0x00000000 [0003.686] GIC-SPI Target CPU: 0 [0003.689] Interrupts Init done [0003.692] calling constructors [0003.695] initializing heap [0003.698] I> Heap: [0xa0960000 ... 0xadf00000] [0003.702] initializing threads [0003.705] initializing timers [0003.708] creating bootstrap completion thread [0003.712] top of bootstrap2() [0003.715] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.719] initializing platform [0003.722] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.728] W> device prod register failed [0003.731] I> Bl_dtb @0xadf00000 [0003.734] I> gpio framework initialized [0003.745] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.750] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.756] I> fixed regulator driver initialized [0003.772] I> register 'maxim' power off handle [0003.774] I> virtual i2c enabled [0003.774] I> registered 'maxim,max20024' pmic [0003.775] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.776] I> Boot-device: QSPI [0003.779] I> Boot_device: QSPI_FLASH instance: 0 [0003.783] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.794] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.801] I> QSPI source rate = 204000 Khz [0003.804] I> Requested rate for QSPI clock = 34000 Khz [0003.809] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.814] I> tx_clk_tap_delay : 0 [0003.817] I> rx_clk_tap_delay : 16 [0003.820] I> QSPI Flash Size = 32 MB [0003.828] I> Qspi initialized successfully [0003.828] I> qspi flash-0 params source = boot args [0003.833] W> No board IDs available [0003.836] E> Failed to get board id info! [0003.841] I> sdmmc-3 params source = safe params [0003.849] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.850] W> Cannot find any partition table for 00000003 [0003.855] E> Failed to publish 00000003 [0003.859] I> Found 23 partitions in SDMMC_USER (instance 3) [0003.878] I> regulator 'vdd-hdmi-5v0' already enabled [0003.884] I> regulator 'vdd-hdmi-5v0' already enabled [0003.884] E> tegrabl_display_init_regulator: hdmi cable is not connected [0003.884] E> tegrabl_display_get_pdata, failed to parse dtb settings [0003.887] E> cannot find any other nvdisp nodes [0003.891] E> no valid display unit config found in dtb [0003.898] W> display init failed [0003.899] initializing target [0003.901] calling apps_init() [0003.904] starting app kernel_boot_app [0003.908] I> Kernel type = Normal Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** ...... L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ��I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ��[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6348-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Tue Jan 24 3 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x459daab18 SMBIOS=0xc7db0000 SMBIOS 3.0=0x458980000 MEMATTR=0x45917a018 ESRT=0x45896f618 RNG=0x47c55dd18 MEMRESERVE=0x459183f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000045896f618 to 0x000000045896f650. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000047fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000045855dfff] [ 0.000000] node 0: [mem 0x000000045855e000-0x0000000458712fff] [ 0.000000] node 0: [mem 0x0000000458713000-0x000000045896ffff] [ 0.000000] node 0: [mem 0x0000000458970000-0x000000045898ffff] [ 0.000000] node 0: [mem 0x0000000458990000-0x0000000458c6ffff] [ 0.000000] node 0: [mem 0x0000000458c70000-0x0000000458cbffff] [ 0.000000] node 0: [mem 0x0000000458cc0000-0x000000045911ffff] [ 0.000000] node 0: [mem 0x0000000459120000-0x000000045914ffff] [ 0.000000] node 0: [mem 0x0000000459150000-0x000000045918ffff] [ 0.000000] node 0: [mem 0x0000000459190000-0x00000004591affff] [ 0.000000] node 0: [mem 0x00000004591b0000-0x000000045928ffff] [ 0.000000] node 0: [mem 0x0000000459290000-0x000000045932ffff] [ 0.000000] node 0: [mem 0x0000000459330000-0x000000045934ffff] [ 0.000000] node 0: [mem 0x0000000459350000-0x000000045939ffff] [ 0.000000] node 0: [mem 0x00000004593a0000-0x00000004593effff] [ 0.000000] node 0: [mem 0x00000004593f0000-0x00000004597fffff] [ 0.000000] node 0: [mem 0x0000000459800000-0x000000045984ffff] [ 0.000000] node 0: [mem 0x0000000459850000-0x000000045989ffff] [ 0.000000] node 0: [mem 0x00000004598a0000-0x0000000459d7ffff] [ 0.000000] node 0: [mem 0x0000000459d80000-0x0000000459d8ffff] [ 0.000000] node 0: [mem 0x0000000459d90000-0x0000000459efffff] [ 0.000000] node 0: [mem 0x0000000459f00000-0x0000000459f9ffff] [ 0.000000] node 0: [mem 0x0000000459fa0000-0x000000045a09ffff] [ 0.000000] node 0: [mem 0x000000045a0a0000-0x000000045a13ffff] [ 0.000000] node 0: [mem 0x000000045a140000-0x000000045a1effff] [ 0.000000] node 0: [mem 0x000000045a1f0000-0x000000045a28ffff] [ 0.000000] node 0: [mem 0x000000045a290000-0x000000045ab9ffff] [ 0.000000] node 0: [mem 0x000000045aba0000-0x000000045ad7ffff] [ 0.000000] node 0: [mem 0x000000045ad80000-0x000000047c50ffff] [ 0.000000] node 0: [mem 0x000000047c510000-0x000000047c55ffff] [ 0.000000] node 0: [mem 0x000000047c560000-0x000000047fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000047fffffff] [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3903653 [ 0.000000] Kernel command line: root=PARTUUID=6ac019ac-23e9-481e-b11b-632234d2fdd1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 15189272K/15862464K available (18432K kernel code, 3168K rwdata, 7164K rodata, 3968K init, 1110K bss, 607656K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000724] Console: colour dummy device 80x25 [ 0.002206] printk: console [tty0] enabled [ 0.002268] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002303] pid_max: default: 32768 minimum: 301 [ 0.002488] LSM: Security Framework initializing [ 0.002551] Yama: becoming mindful. [ 0.002595] SELinux: Initializing. [ 0.002751] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.002797] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.005967] rcu: Hierarchical SRCU implementation. [ 0.006249] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006924] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006973] DTB Build time: Jan 24 2023 15:26:08 [ 0.009644] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009905] Remapping and enabling EFI services. [ 0.011750] smp: Bringing up secondary CPUs ... [ 0.040732] Detected PIPT I-cache on CPU1 [ 0.040842] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071919] Detected PIPT I-cache on CPU2 [ 0.072078] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101612] Detected PIPT I-cache on CPU3 [ 0.101758] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131410] Detected PIPT I-cache on CPU4 [ 0.131524] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161065] Detected PIPT I-cache on CPU5 [ 0.161212] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161589] smp: Brought up 1 node, 6 CPUs [ 0.161928] SMP: Total of 6 processors activated. [ 0.162012] CPU features: detected: Privileged Access Never [ 0.162044] CPU features: detected: LSE atomic instructions [ 0.162066] CPU features: detected: User Access Override [ 0.162089] CPU features: detected: 32-bit EL0 Support [ 0.162111] CPU features: detected: RAS Extension Support [ 0.162131] CPU features: detected: CRC32 instructions [ 0.162152] CPU features: detected: 32-bit EL1 Support [ 0.231556] CPU: All CPU(s) started at EL2 [ 0.238068] devtmpfs: initialized [ 0.290249] Registered cp15_barrier emulation handler [ 0.290393] Registered setend emulation handler [ 0.290421] KASLR enabled [ 0.290696] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290739] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291989] pinctrl core: initialized pinctrl subsystem [ 0.293046] SMBIOS 3.0.0 present. [ 0.293081] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 2.1-32413640 01/24/2023 [ 0.293721] NET: Registered protocol family 16 [ 0.295909] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.296869] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298168] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298243] audit: initializing netlink subsys (disabled) [ 0.298530] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.298985] thermal_sys: Registered thermal governor 'step_wise' [ 0.298991] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299015] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.301184] cpuidle: using governor menu [ 0.301475] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301988] ASID allocator initialised with 32768 entries [ 0.302267] Serial: AMBA PL011 UART driver [ 0.305655] Tegra reboot handler registered. [ 0.384205] mc: mapped MMIO address: 0xffff800010880000 -> 0x2c10000 [ 0.384281] mc: mapped MMIO address: 0xffff8000108a0000 -> 0x2c20000 [ 0.384324] mc: mapped MMIO address: 0xffff8000108c0000 -> 0x2c30000 [ 0.384364] mc: mapped MMIO address: 0xffff8000108e0000 -> 0x2c40000 [ 0.384404] mc: mapped MMIO address: 0xffff800010900000 -> 0x2c50000 [ 0.384444] mc: mapped MMIO address: 0xffff800010920000 -> 0x2b80000 [ 0.384483] mc: mapped MMIO address: 0xffff800010940000 -> 0x2b90000 [ 0.384522] mc: mapped MMIO address: 0xffff800010960000 -> 0x2ba0000 [ 0.384566] mc: mapped MMIO address: 0xffff800010980000 -> 0x2bb0000 [ 0.384616] mc: mapped MMIO address: 0xffff8000109a0000 -> 0x1700000 [ 0.384675] mc: mapped MMIO address: 0xffff8000109c0000 -> 0x1710000 [ 0.384731] mc: mapped MMIO address: 0xffff8000109e0000 -> 0x1720000 [ 0.384782] mc: mapped MMIO address: 0xffff800010a00000 -> 0x1730000 [ 0.384821] mc: mapped MMIO address: 0xffff800010a20000 -> 0x1740000 [ 0.384860] mc: mapped MMIO address: 0xffff800010a40000 -> 0x1750000 [ 0.384899] mc: mapped MMIO address: 0xffff800010a60000 -> 0x1760000 [ 0.384954] mc: mapped MMIO address: 0xffff800010a80000 -> 0x1770000 [ 0.385066] mc-err: mcerr ops are set to t19x [ 0.400275] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.400314] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.400340] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.400366] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.407085] ACPI: Interpreter disabled. [ 0.408436] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.409907] iommu: Default domain type: Translated [ 0.409998] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.410384] SCSI subsystem initialized [ 0.410598] usbcore: registered new interface driver usbfs [ 0.410655] usbcore: registered new interface driver hub [ 0.410704] usbcore: registered new device driver usb [ 0.411297] mc: Linux media interface: v0.10 [ 0.411345] videodev: Linux video capture interface: v2.00 [ 0.411791] pps_core: LinuxPPS API ver. 1 registered [ 0.411813] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.411851] PTP clock support registered [ 0.412117] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.412452] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.412548] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.413327] Registered efivars operations [ 0.413723] FPGA manager framework [ 0.413847] Advanced Linux Sound Architecture Driver Initialized. [ 0.414501] Bluetooth: Core ver 2.22 [ 0.414546] NET: Registered protocol family 31 [ 0.414565] Bluetooth: HCI device and connection manager initialized [ 0.414591] Bluetooth: HCI socket layer initialized [ 0.414618] Bluetooth: L2CAP socket layer initialized [ 0.414649] Bluetooth: SCO socket layer initialized [ 0.417582] camchar: rtcpu character device driver loaded [ 0.418756] clocksource: Switched to clocksource arch_sys_counter [ 0.822080] VFS: Disk quotas dquot_6.6.0 [ 0.822176] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.822646] pnp: PnP ACPI: disabled [ 0.836507] la/ptsa driver initialized. [ 0.836662] NET: Registered protocol family 2 [ 0.837037] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.851267] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.851529] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.852211] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.852896] TCP: Hash tables configured (established 131072 bind 65536) [ 0.853106] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.853341] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.853760] NET: Registered protocol family 1 [ 0.854637] RPC: Registered named UNIX socket transport module. [ 0.854676] RPC: Registered udp transport module. [ 0.854698] RPC: Registered tcp transport module. [ 0.854720] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.854802] PCI: CLS 0 bytes, default 64 [ 0.855126] Trying to unpack rootfs image as initramfs... [ 1.115876] Freeing initrd memory: 8208K [ 1.121445] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.121873] kvm [1]: IPA Size Limit: 40 bits [ 1.122299] kvm [1]: vgic interrupt IRQ9 [ 1.122690] kvm [1]: VHE mode initialized successfully [ 1.124029] Initialise system trusted keyrings [ 1.124277] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 1.129075] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.129675] NFS: Registering the id_resolver key type [ 1.129705] Key type id_resolver registered [ 1.129746] Key type id_legacy registered [ 1.129817] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.129836] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.129882] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.137821] NET: Registered protocol family 38 [ 1.137843] Key type asymmetric registered [ 1.137854] Asymmetric key parser 'x509' registered [ 1.137898] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.138108] io scheduler mq-deadline registered [ 1.138121] io scheduler kyber registered [ 1.142803] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.145193] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.145278] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.145376] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.145433] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.145510] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.149930] scrncapt: init (heads:4 wins:6 planes:4) [ 1.149999] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.150817] EINJ: ACPI disabled. [ 1.153272] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.153290] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 1.153301] tegra-pmc: ### PMC reset level: L0 [ 1.153311] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.153366] tegra-pmc: PMC Prod config success [ 1.157598] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.162003] random: fast init done [ 1.162109] printk: console [ttyTCU0] enabled [ 2.646459] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.651027] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.655626] arm-smmu 10000000.iommu: stage 1 translation [ 2.661288] arm-smmu 10000000.iommu: stage 2 translation [ 2.666565] arm-smmu 10000000.iommu: nested translation [ 2.672157] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.679331] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.687842] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.692286] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.699088] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.706674] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.712133] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.716592] arm-smmu 12000000.iommu: stage 1 translation [ 2.722105] arm-smmu 12000000.iommu: stage 2 translation [ 2.727544] arm-smmu 12000000.iommu: nested translation [ 2.732955] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.740389] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.749199] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.753277] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.759823] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.767272] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.776961] tegra_profiler: version: 1.150, samples/io: 50/29 [ 2.780251] tegra_profiler: auth: init [ 2.784734] THERMAL EST: found 3 subdevs [ 2.788168] THERMAL EST num_resources: 0 [ 2.791765] [THERMAL EST subdev 0] [ 2.795334] [THERMAL EST subdev 1] [ 2.798732] [THERMAL EST subdev 2] [ 2.801718] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.808549] THERMAL EST: thz register success. [ 2.812451] THERMAL EST: end of probe, return err: 0 [ 2.817675] nvsciipc: loaded module [ 2.824291] tun: Universal TUN/TAP device driver, 1.6 [ 2.827360] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.833492] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.839044] e1000e: Intel(R) PRO/1000 Network Driver [ 2.844247] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.850052] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.855368] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.861678] PPP generic driver version 2.4.2 [ 2.866019] PPP BSD Compression module registered [ 2.870600] PPP Deflate Compression module registered [ 2.875853] PPP MPPE Compression module registered [ 2.880621] usbcore: registered new interface driver r8152 [ 2.886106] usbcore: registered new interface driver asix [ 2.891458] usbcore: registered new interface driver ax88179_178a [ 2.897816] usbcore: registered new interface driver cdc_ether [ 2.903509] usbcore: registered new interface driver net1080 [ 2.909365] usbcore: registered new interface driver cdc_subset [ 2.915149] usbcore: registered new interface driver zaurus [ 2.920841] usbcore: registered new interface driver cdc_ncm [ 2.926797] usbcore: registered new interface driver aqc111 [ 2.932143] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.938246] ohci-pci: OHCI PCI platform driver [ 2.942555] ohci-platform: OHCI generic platform driver [ 2.948276] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.954636] usbcore: registered new interface driver uas [ 2.959095] usbcore: registered new interface driver usb-storage [ 2.964939] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.971115] mousedev: PS/2 mouse device common for all mice [ 2.976253] usbcore: registered new interface driver xpad [ 2.984012] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.986978] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.994785] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.001273] i2c /dev entries driver [ 3.004387] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.010296] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.015445] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.021112] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.026178] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.031921] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.037092] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.048922] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 3.049864] device-mapper: uevent: version 1.0.3 [ 3.054305] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.064228] cpuidle: Initializing cpuidle driver [ 3.068289] sdhci: Secure Digital Host Controller Interface driver [ 3.073102] sdhci: Copyright(c) Pierre Ossman [ 3.077536] Synopsys Designware Multimedia Card Interface Driver [ 3.083709] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.089889] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.090494] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.103089] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.121592] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x2 [ 3.131111] vdd-1v0: supplied by regulator-dummy [ 3.136660] vdd-1v8-hs: supplied by regulator-dummy [ 3.141563] vdd-1v8-ls: supplied by regulator-dummy [ 3.146483] vdd-1v8-ao: supplied by regulator-dummy [ 3.150466] vddio-ddr-1v1: supplied by regulator-dummy [ 3.155264] vdd-rtc: supplied by regulator-dummy [ 3.157035] spmic-ldo1: supplied by regulator-dummy [ 3.158635] vdd-ao-3v3: supplied by regulator-dummy [ 3.165230] vddio-emmc-3v3: supplied by regulator-dummy [ 3.171659] spmic-ldo4: supplied by regulator-dummy [ 3.173328] vdd-usb-3v3: supplied by regulator-dummy [ 3.179937] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.186491] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.192381] spmic-ldo8: supplied by vdd-1v8-ls [ 3.194190] gpio-510 (gpio_default): hogged as output/high [ 3.195998] gpio-511 (gpio_default): hogged as output/high [ 3.198668] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.335108] max77686-rtc max77620-rtc: registered as rtc0 [ 3.336324] max77620-power max20024-power: Event recorder REG_NVERC : 0x40 [ 3.336584] max77620 4-003c: max77620 probe successful ��rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ��[ 4.057483] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.058316] hid: raw HID events driver (C) Jiri Kosina [ 4.058941] usbcore: registered new interface driver usbhid [ 4.059099] usbhid: USB HID core driver [ 4.060979] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.062022] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ��[ 27.320285] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.395899] Camera-FW on t194-rce-safe ready SHA1=01b72e3c (crt 0.775 ms, total boot 76.418 ms) ��[ 4.147364] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.147907] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.148869] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.149440] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.151060] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.151711] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.152251] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.153401] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (48) [ 4.153776] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.156851] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=01b72e3c1b59ab02ad8c842bed3160278b410129 [ 4.164775] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.171306] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.175217] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.181392] denver_knobs_init:MTS_VERSION:55637613 [ 4.195146] t19x_cache tegra-cache: probed [ 4.197662] optee: probing for conduit method. [ 4.198492] optee: revision 3.19 (18d0f61b) [ 4.200022] optee: dynamic shared memory is enabled [ 4.201939] optee: initialized driver [ 4.209040] nvpmodel: initialized successfully [ 4.210124] tegra_hv: get_hvd: not initialized yet [ 4.214518] user_ivc_mempool: hypervisor not present [ 4.220632] usbcore: registered new interface driver snd-usb-audio [ 4.227089] u32 classifier [ 4.228498] input device check on [ 4.232208] Actions configured [ 4.235539] Initializing XFRM netlink socket [ 4.240385] NET: Registered protocol family 10 [ 4.247475] Segment Routing with IPv6 [ 4.248120] NET: Registered protocol family 17 [ 4.252125] NET: Registered protocol family 15 [ 4.256802] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.270222] Bluetooth: RFCOMM socket layer initialized [ 4.275074] Bluetooth: RFCOMM ver 1.11 [ 4.278708] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.284823] Bluetooth: HIDP socket layer initialized [ 4.290274] 9pnet: Installing 9P2000 support [ 4.294064] Key type dns_resolver registered [ 4.299692] registered taskstats version 1 [ 4.302425] Loading compiled-in X.509 certificates [ 4.315464] Loaded X.509 cert 'Build time autogenerated kernel key: d2e6b29ce3ba3f3d31103e414d71889f8474be7b' [ 4.318434] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.328160] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.330352] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.339195] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.347566] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.462918] tegra194-pcie 14160000.pcie: Link up [ 4.466446] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.466634] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.466866] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.467164] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.467359] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.467738] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.468187] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.480883] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.481310] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.481723] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.483619] pci 0004:01:00.0: supports D1 D2 [ 4.483772] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.496404] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.496807] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.497117] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.497492] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.497901] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.498066] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.498305] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.505185] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.513395] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.523922] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.527987] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.533962] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.541424] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.550181] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.551658] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.559787] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.568563] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.683623] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.684176] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.684445] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.684679] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.684996] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.685309] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.685690] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.686101] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.707271] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.707705] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.709608] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.711120] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.712514] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.714411] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.715520] pci 0005:00:00.0: Removing from iommu group 7 [ 5.715804] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.750109] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.774744] host1x 13e10000.host1x: initialized [ 5.776385] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.777333] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.778732] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.779606] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.781009] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.781559] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.782902] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.783525] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.784472] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.785067] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.793539] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.800738] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.810642] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.818018] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.827612] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.834732] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.845220] falcon 15340000.vic: Adding to iommu group 17 [ 5.859251] falcon 15340000.vic: initialized [ 5.860309] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.866248] falcon 15380000.nvjpg: initialized [ 5.867093] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.878271] falcon 154c0000.nvenc: initialized [ 5.879137] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.887868] falcon 15a80000.nvenc1: initialized [ 5.888712] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.900659] nvdec 15480000.nvdec: initialized [ 5.901292] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.911219] nvdec 15140000.nvdec1: initialized [ 5.911752] tsec 15500000.tsec: Adding to iommu group 18 [ 5.917138] tsec 15500000.tsec: initialized [ 5.917594] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.924982] tsec 15100000.tsecb: initialized [ 5.929656] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.961491] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.977944] gpio-374 (wifi-enable): hogged as output/high [ 5.978266] gpio-431 (camera-control-output-low): hogged as output/low [ 5.978509] gpio-432 (camera-control-output-low): hogged as output/low [ 5.980176] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.982035] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.982664] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.984307] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.985444] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.987166] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.992689] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.000906] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.008217] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.020435] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.024667] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.030652] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.039507] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.048945] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.056395] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.063666] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.070127] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.079446] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.085881] pva 16000000.pva0: Adding to iommu group 22 [ 6.111959] pva 16000000.pva0: initialized [ 6.117012] pva 16800000.pva1: Adding to iommu group 23 [ 6.129104] pva 16800000.pva1: initialized [ 6.134740] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.148440] nvdla 15880000.nvdla0: initialized [ 6.149729] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.158125] nvdla 158c0000.nvdla1: initialized [ 6.162328] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=62 [ 6.162733] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.163234] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.163523] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.163747] tegradc 15200000.display: Adding to iommu group 26 [ 6.163757] tegradc 15210000.display: Adding to iommu group 26 [ 6.164045] tegradccommon 15200000.display-hub: dma mapping done [ 6.164600] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.176357] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.181057] tegra_cec 3960000.tegra_cec: probed [ 6.186577] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.191656] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.199326] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.204495] kfuse 3830000.kfuse: initialized [ 6.209151] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.214908] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.222119] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.228012] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.237466] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.242972] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.251701] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.257582] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.277516] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.277879] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.280622] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.289106] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.297673] tegra-xusb 3610000.xhci: irq 187, io mem 0x03610000 [ 6.303992] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.311850] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.319027] usb usb1: Product: xHCI Host Controller [ 6.323740] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.330037] usb usb1: SerialNumber: 3610000.xhci [ 6.335474] hub 1-0:1.0: USB hub found [ 6.338585] hub 1-0:1.0: 4 ports detected [ 6.343387] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.348013] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.355883] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.363518] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.371191] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.378452] usb usb2: Product: xHCI Host Controller [ 6.383676] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.389883] usb usb2: SerialNumber: 3610000.xhci [ 6.395229] hub 2-0:1.0: USB hub found [ 6.398072] hub 2-0:1.0: 4 ports detected [ 6.439122] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.444486] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.445842] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.446027] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.459973] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1901000 KHz, changing to: 1907200 KHz [ 6.461073] tegra194-cpufreq ccplex: probed with BWMGR [ 6.462245] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.462667] irq: IRQ261: trimming hierarchy from :pmc@c360000 [ 6.464783] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.469987] tegra194-vi5 15c10000.vi: initialized [ 6.471649] tegradc 15210000.display: disp0 connected to head1->sor [ 6.471991] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.472741] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.474084] mmc0: CQHCI version 5.10 [ 6.477596] tegradc 15210000.display: DT parsed successfully [ 6.483711] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.487343] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.487513] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.492909] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.501158] generic_infoframe_type: 0x87 [ 6.508945] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.515300] tegradc 15200000.display: DT parsed successfully [ 6.521865] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.525560] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.532420] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.539498] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.544679] nvethernet 2490000.ethernet: Failed to read DMA Tx ring size, using default [1024] [ 6.544685] nvethernet 2490000.ethernet: Failed to read DMA Tx ring size, using default [1024] [ 6.550810] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.552907] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.558863] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.558874] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.559291] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.559298] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.584712] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.591876] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:76:3c:e1 [ 6.598762] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.616405] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.621581] nvethernet 2490000.ethernet: Macsec not supported [ 6.622900] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.628586] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.635885] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.644797] tegradc 15200000.display: probed [ 6.648506] irq: IRQ264: trimming hierarchy from :interrupt-controller@3881000 [ 6.654788] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.676730] mmc0: Command Queue Engine enabled [ 6.677715] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.683371] mmc0: periodic cache flush enabled [ 6.689049] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.695092] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.695683] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.734771] Console: switching to colour frame buffer device 80x30 [ 6.734788] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.735324] tegra-se-nvhost 15810000.se: initialized [ 6.740837] tegradc 15200000.display: fb registered [ 6.740890] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.745437] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 [ 6.753776] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.758158] tegradc 15210000.display: disp1 connected to head1->sor [ 6.763715] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.765964] random: crng init done [ 6.773259] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.780211] tegra-se-nvhost 15820000.se: initialized [ 6.785784] tegradc 15210000.display: DT parsed successfully [ 6.793912] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.795313] tegradc 15210000.display: Display dc.00000000380527a8 registered with id=1 [ 6.802728] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.807003] tegradc 15210000.display: vblank syncpt # 13 for dc 1 [ 6.813390] tegra-se-nvhost 15830000.se: initialized [ 6.819261] tegradc 15210000.display: vpulse3 syncpt # 14 for dc 1 [ 6.828741] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.838321] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.839919] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.844455] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.878759] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.883645] usb 1-2: Manufacturer: Generic [ 6.888255] tegra-se-nvhost 15840000.se: initialized [ 6.889652] hub 1-2:1.0: USB hub found [ 6.889657] tegradc 15210000.display: probed [ 6.894509] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.897508] hub 1-2:1.0: 4 ports detected [ 6.901935] tegra_actmon d230000.actmon: in actmon_register()... [ 6.917006] tegradc 15210000.display: fb registered [ 6.917157] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.925436] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.927828] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.934468] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.934478] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.955487] tegradc 15210000.display: blank - powerdown [ 6.956103] hvc_sysfs: hypervisor is not present [ 6.960730] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.960734] Extcon DP: HPD disabled [ 6.960744] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.967613] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.973342] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.973348] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.029019] ALSA device list: [ 7.029120] No soundcards found. [ 7.030131] Freeing unused kernel memory: 3968K [ 7.030391] Run /init as init process [ 7.040877] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.041131] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.041308] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.041456] usb 2-3: Manufacturer: Generic [ 7.053890] hub 2-3:1.0: USB hub found [ 7.056091] hub 2-3:1.0: 4 ports detected [ 7.086075] Root device found: PARTUUID=6ac019ac-23e9-481e-b11b-632234d2fdd1 ��WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ��[ 7.162811] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.206811] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.206970] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.311954] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.312176] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.312333] usb 1-3: Product: Bluetooth Radio [ 7.312434] usb 1-3: Manufacturer: Realtek [ 7.312542] usb 1-3: SerialNumber: 00e04c000001 [ 7.621860] EXT4-fs (mmcblk0p1): 17 orphan inodes deleted [ 7.622006] EXT4-fs (mmcblk0p1): recovery complete [ 7.626914] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.637860] Rootfs mounted over PARTUUID=6ac019ac-23e9-481e-b11b-632234d2fdd1 [ 7.674443] Switching from initrd to actual rootfs [ 7.685025] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 [ 7.685227] CPU: 1 PID: 1 Comm: chroot Not tainted 5.10.104-tegra #1 [ 7.685365] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 2.1-32413640 01/24/2023 [ 7.685619] Call trace: [ 7.685683] dump_backtrace+0x0/0x1d0 [ 7.685759] show_stack+0x30/0x40 [ 7.685832] dump_stack+0xd8/0x138 [ 7.685902] panic+0x17c/0x384 [ 7.685979] do_exit+0xaa8/0xab0 [ 7.686061] do_group_exit+0x4c/0xb0 [ 7.686136] __arm64_sys_exit_group+0x28/0x30 [ 7.686228] el0_svc_common.constprop.0+0x80/0x1d0 [ 7.686327] do_el0_svc+0x38/0xb0 [ 7.686401] el0_svc+0x1c/0x30 [ 7.686469] el0_sync_handler+0xa8/0xb0 [ 7.686551] el0_sync+0x16c/0x180 [ 7.686623] SMP: stopping secondary CPUs [ 7.686716] Kernel Offset: 0x494c6e950000 from 0xffff800010000000 [ 7.687033] PHYS_OFFSET: 0xffffbd0040000000 [ 7.687348] CPU features: 0x8240002,03802a30 [ 7.687658] Memory Limit: none [ 7.688636] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 ]--- �� [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.5.0.0-t194-41334769-d9272b5a) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x2 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 42500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.189] I> Qspi flash params source = mb1bct [0000.202] I> Qspi flash params source = mb1bct [0000.236] I> Qspi flash params source = mb1bct [0000.800] I> Qspi flash params source = mb1bct [0000.817] I> Qspi flash params source = mb1bct [0000.856] W> Platform config not found in BCT [0000.883] I> Qspi flash params source = mb1bct [0000.908] I> MB1 done ����main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init �� [0000.918] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-78ae5a2a) [0000.918] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.919] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.920] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.925] W> device prod register failed [0000.929] I> gpio framework initialized [0000.933] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.940] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.948] I> No valid sdcard_params in mb1_bct [0000.952] I> Boot_device: QSPI_FLASH instance: 0 [0000.957] I> qspi flash-0 params source = boot args [0000.962] I> QSPI-0l initialized successfully [0000.965] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 23 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.043] I> Relocating BR-BCT [0002.044] > DEVICE_PROD: device prod is not initialized. [0002.355] I> Relocating OP-TEE dtb from: 0x6bfff240 to 0x70050000, size: 1008 [0002.356] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.357] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.357] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.358] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.358] I> dram_block larger than 80000000 [0002.360] I> [4] START: 0x100000000, SIZE: 0x380000000 [0002.372] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.375] I> found decompressor handler: lz4 [0002.766] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.767] I> Setting EKB blob info to OPTEE dtb finished. ��NOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:29, Jan 24 2023 I/TC: �� bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ��I/TC: Non-��clk_early initialized ��secu��mail_early initialized ��re��fuse initialized hwwdt initialized �� ext��t194_ec_get_ec_list: found 45 ecs ��ernal DT fo��ec initialized ��u��vmon_setup_monitors: found 3 monitors vmon initialized ��adc initialized fmon_populate_monitors: found 73 monitors �� ��fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ��I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:��clk_dt_late initialized noc_late initialized ��2��pm_post initialized dbells initialized ��0:4��dmce initialized ��2��cvc initialized �� UTC 2023 aa��avfs_clk_mach_post initialized ��rch64��avfs_clk_platform_post initialized �� ��cvc_late initialized regulator_post initialized ��I/��rm initialized console_late initialized clk_dt_post initialized mc_reg initialized ��TC: WARNING: This OP-TEE configuration��pg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] �� might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot �� [0003.394] I> Welcome to NVDisp-Init [0003.395] I> NVDisp-Init version: t194-709c0123 [0003.395] I> CPU-BL Params @ 0xca020000 [0003.395] I> 0) Base:0x00000000 Size:0x00000000 [0003.395] I> 1) Base:0xc8300000 Size:0x00100000 [0003.396] I> 2) Base:0xc9800000 Size:0x00200000 [0003.396] I> 3) Base:0xc8600000 Size:0x00200000 [0003.399] I> 4) Base:0xc8200000 Size:0x00100000 [0003.403] I> 5) Base:0xc8100000 Size:0x00100000 [0003.408] I> 6) Base:0xc9400000 Size:0x00400000 [0003.412] I> 7) Base:0xc9000000 Size:0x00400000 [0003.417] I> 8) Base:0xc8000000 Size:0x00100000 [0003.421] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.425] I> 10) Base:0xca800000 Size:0x00800000 [0003.430] I> 11) Base:0x40000000 Size:0x00040000 [0003.434] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.439] I> 13) Base:0x40046000 Size:0x00002000 [0003.443] I> 14) Base:0x40048000 Size:0x00002000 [0003.448] I> 15) Base:0xaf000000 Size:0x00004000 [0003.452] I> 16) Base:0x4004a000 Size:0x00002000 [0003.457] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.461] I> 18) Base:0x4004c000 Size:0x00002000 [0003.466] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.470] I> 20) Base:0x4004e000 Size:0x00002000 [0003.475] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.479] I> 22) Base:0x00000000 Size:0x00000000 [0003.483] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.488] I> 24) Base:0xcc000000 Size:0x02000000 [0003.492] I> 25) Base:0x40050000 Size:0x00002000 [0003.497] I> 26) Base:0x40040000 Size:0x00006000 [0003.501] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.506] I> 28) Base:0xc8400000 Size:0x00200000 [0003.510] I> 29) Base:0xc8800000 Size:0x00400000 [0003.515] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.519] I> 31) Base:0x00000000 Size:0x00000000 [0003.524] I> 32) Base:0xf8000000 Size:0x08000000 [0003.528] I> 33) Base:0xce000000 Size:0x2a000000 [0003.533] I> 34) Base:0xcb000000 Size:0x01000000 [0003.537] I> 35) Base:0xae000000 Size:0x01000000 [0003.541] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.546] I> 37) Base:0xca000000 Size:0x00800000 [0003.550] I> 38) Base:0x80000000 Size:0x20000000 [0003.555] I> 39) Base:0xb0000000 Size:0x08000000 [0003.559] I> 40) Base:0x00000000 Size:0x00000000 [0003.564] I> 41) Base:0x00000000 Size:0x00000000 [0003.568] I> 42) Base:0x00000000 Size:0x00000000 [0003.573] I> 43) Base:0x00000000 Size:0x00000000 [0003.577] I> 44) Base:0x00000000 Size:0x00000000 [0003.582] I> 45) Base:0x00000000 Size:0x00000000 [0003.586] GIC-SPI Target CPU: 0 [0003.589] Interrupts Init done [0003.592] calling constructors [0003.595] initializing heap [0003.597] I> Heap: [0xa0960000 ... 0xadf00000] [0003.602] initializing threads [0003.605] initializing timers [0003.607] creating bootstrap completion thread [0003.612] top of bootstrap2() [0003.615] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.619] initializing platform [0003.622] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.628] W> device prod register failed [0003.631] I> Bl_dtb @0xadf00000 [0003.634] I> gpio framework initialized [0003.645] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.650] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.656] I> fixed regulator driver initialized [0003.673] I> register 'maxim' power off handle [0003.675] I> virtual i2c enabled [0003.675] I> registered 'maxim,max20024' pmic [0003.675] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.676] I> Boot-device: QSPI [0003.679] I> Boot_device: QSPI_FLASH instance: 0 [0003.683] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.694] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.701] I> QSPI source rate = 204000 Khz [0003.704] I> Requested rate for QSPI clock = 34000 Khz [0003.709] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.714] I> tx_clk_tap_delay : 0 [0003.717] I> rx_clk_tap_delay : 16 [0003.720] I> QSPI Flash Size = 32 MB [0003.728] I> Qspi initialized successfully [0003.728] I> qspi flash-0 params source = boot args [0003.733] W> No board IDs available [0003.735] E> Failed to get board id info! [0003.742] I> sdmmc-3 params source = safe params [0003.748] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.750] W> Cannot find any partition table for 00000003 [0003.754] E> Failed to publish 00000003 [0003.759] I> Found 23 partitions in SDMMC_USER (instance 3) [0003.778] I> regulator 'vdd-hdmi-5v0' already enabled [0003.785] I> regulator 'vdd-hdmi-5v0' already enabled [0003.785] E> tegrabl_display_init_regulator: hdmi cable is not connected [0003.786] E> tegrabl_display_get_pdata, failed to parse dtb settings [0003.787] E> cannot find any other nvdisp nodes [0003.790] E> no valid display unit config found in dtb [0003.798] W> display init failed [0003.799] initializing target [0003.801] calling apps_init() [0003.804] starting app kernel_boot_app [0003.808] I> Kernel type = Normal Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** ...... L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ��I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ��[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6348-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Tue Jan 24 3 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x459daab18 SMBIOS=0xc7db0000 SMBIOS 3.0=0x458980000 MEMATTR=0x45917a018 ESRT=0x4591b2698 RNG=0x47c55dd18 MEMRESERVE=0x459183f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000004591b2698 to 0x00000004591b26d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000047fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000045855dfff] [ 0.000000] node 0: [mem 0x000000045855e000-0x0000000458712fff] [ 0.000000] node 0: [mem 0x0000000458713000-0x000000045896ffff] [ 0.000000] node 0: [mem 0x0000000458970000-0x000000045898ffff] [ 0.000000] node 0: [mem 0x0000000458990000-0x0000000458c6ffff] [ 0.000000] node 0: [mem 0x0000000458c70000-0x0000000458cbffff] [ 0.000000] node 0: [mem 0x0000000458cc0000-0x000000045911ffff] [ 0.000000] node 0: [mem 0x0000000459120000-0x000000045914ffff] [ 0.000000] node 0: [mem 0x0000000459150000-0x000000045918ffff] [ 0.000000] node 0: [mem 0x0000000459190000-0x00000004591affff] [ 0.000000] node 0: [mem 0x00000004591b0000-0x000000045928ffff] [ 0.000000] node 0: [mem 0x0000000459290000-0x000000045932ffff] [ 0.000000] node 0: [mem 0x0000000459330000-0x000000045934ffff] [ 0.000000] node 0: [mem 0x0000000459350000-0x000000045939ffff] [ 0.000000] node 0: [mem 0x00000004593a0000-0x00000004593effff] [ 0.000000] node 0: [mem 0x00000004593f0000-0x00000004597fffff] [ 0.000000] node 0: [mem 0x0000000459800000-0x000000045984ffff] [ 0.000000] node 0: [mem 0x0000000459850000-0x000000045989ffff] [ 0.000000] node 0: [mem 0x00000004598a0000-0x0000000459d7ffff] [ 0.000000] node 0: [mem 0x0000000459d80000-0x0000000459d8ffff] [ 0.000000] node 0: [mem 0x0000000459d90000-0x0000000459efffff] [ 0.000000] node 0: [mem 0x0000000459f00000-0x0000000459f9ffff] [ 0.000000] node 0: [mem 0x0000000459fa0000-0x000000045a09ffff] [ 0.000000] node 0: [mem 0x000000045a0a0000-0x000000045a13ffff] [ 0.000000] node 0: [mem 0x000000045a140000-0x000000045a1effff] [ 0.000000] node 0: [mem 0x000000045a1f0000-0x000000045a28ffff] [ 0.000000] node 0: [mem 0x000000045a290000-0x000000045ab9ffff] [ 0.000000] node 0: [mem 0x000000045aba0000-0x000000045ad7ffff] [ 0.000000] node 0: [mem 0x000000045ad80000-0x000000047c50ffff] [ 0.000000] node 0: [mem 0x000000047c510000-0x000000047c55ffff] [ 0.000000] node 0: [mem 0x000000047c560000-0x000000047fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000047fffffff] [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3903653 [ 0.000000] Kernel command line: root=PARTUUID=6ac019ac-23e9-481e-b11b-632234d2fdd1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 15189276K/15862464K available (18432K kernel code, 3168K rwdata, 7164K rodata, 3968K init, 1110K bss, 607652K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000773] Console: colour dummy device 80x25 [ 0.002164] printk: console [tty0] enabled [ 0.002228] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002265] pid_max: default: 32768 minimum: 301 [ 0.002461] LSM: Security Framework initializing [ 0.002537] Yama: becoming mindful. [ 0.002589] SELinux: Initializing. [ 0.002751] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.002799] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.006098] rcu: Hierarchical SRCU implementation. [ 0.006336] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007045] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007122] DTB Build time: Jan 24 2023 15:26:08 [ 0.009796] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010054] Remapping and enabling EFI services. [ 0.011411] smp: Bringing up secondary CPUs ... [ 0.041433] Detected PIPT I-cache on CPU1 [ 0.041532] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070838] Detected PIPT I-cache on CPU2 [ 0.070984] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100341] Detected PIPT I-cache on CPU3 [ 0.100433] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.129859] Detected PIPT I-cache on CPU4 [ 0.130030] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.159496] Detected PIPT I-cache on CPU5 [ 0.159640] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160217] smp: Brought up 1 node, 6 CPUs [ 0.160378] SMP: Total of 6 processors activated. [ 0.160476] CPU features: detected: Privileged Access Never [ 0.160500] CPU features: detected: LSE atomic instructions [ 0.160513] CPU features: detected: User Access Override [ 0.160526] CPU features: detected: 32-bit EL0 Support [ 0.160569] CPU features: detected: RAS Extension Support [ 0.160582] CPU features: detected: CRC32 instructions [ 0.160595] CPU features: detected: 32-bit EL1 Support [ 0.238375] CPU: All CPU(s) started at EL2 [ 0.247019] devtmpfs: initialized [ 0.295452] Registered cp15_barrier emulation handler [ 0.295611] Registered setend emulation handler [ 0.295638] KASLR enabled [ 0.295877] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.295901] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.297245] pinctrl core: initialized pinctrl subsystem [ 0.298254] SMBIOS 3.0.0 present. [ 0.298282] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 2.1-32413640 01/24/2023 [ 0.298877] NET: Registered protocol family 16 [ 0.301177] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.302269] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.303568] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.303633] audit: initializing netlink subsys (disabled) [ 0.303936] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.304397] thermal_sys: Registered thermal governor 'step_wise' [ 0.304404] thermal_sys: Registered thermal governor 'power_allocator' [ 0.304420] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.306594] cpuidle: using governor menu [ 0.307508] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.307986] ASID allocator initialised with 32768 entries [ 0.308218] Serial: AMBA PL011 UART driver [ 0.311900] Tegra reboot handler registered. [ 0.381916] mc: mapped MMIO address: 0xffff800010880000 -> 0x2c10000 [ 0.381956] mc: mapped MMIO address: 0xffff8000108a0000 -> 0x2c20000 [ 0.381981] mc: mapped MMIO address: 0xffff8000108c0000 -> 0x2c30000 [ 0.382004] mc: mapped MMIO address: 0xffff8000108e0000 -> 0x2c40000 [ 0.382028] mc: mapped MMIO address: 0xffff800010900000 -> 0x2c50000 [ 0.382049] mc: mapped MMIO address: 0xffff800010920000 -> 0x2b80000 [ 0.382072] mc: mapped MMIO address: 0xffff800010940000 -> 0x2b90000 [ 0.382094] mc: mapped MMIO address: 0xffff800010960000 -> 0x2ba0000 [ 0.382174] mc: mapped MMIO address: 0xffff800010980000 -> 0x2bb0000 [ 0.382215] mc: mapped MMIO address: 0xffff8000109a0000 -> 0x1700000 [ 0.382238] mc: mapped MMIO address: 0xffff8000109c0000 -> 0x1710000 [ 0.382288] mc: mapped MMIO address: 0xffff8000109e0000 -> 0x1720000 [ 0.382322] mc: mapped MMIO address: 0xffff800010a00000 -> 0x1730000 [ 0.382347] mc: mapped MMIO address: 0xffff800010a20000 -> 0x1740000 [ 0.382372] mc: mapped MMIO address: 0xffff800010a40000 -> 0x1750000 [ 0.382397] mc: mapped MMIO address: 0xffff800010a60000 -> 0x1760000 [ 0.382422] mc: mapped MMIO address: 0xffff800010a80000 -> 0x1770000 [ 0.382514] mc-err: mcerr ops are set to t19x [ 0.394998] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395028] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395043] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395083] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.403987] ACPI: Interpreter disabled. [ 0.405714] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.407460] iommu: Default domain type: Translated [ 0.407571] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.408129] SCSI subsystem initialized [ 0.408354] usbcore: registered new interface driver usbfs [ 0.408418] usbcore: registered new interface driver hub [ 0.408471] usbcore: registered new device driver usb [ 0.409051] mc: Linux media interface: v0.10 [ 0.409099] videodev: Linux video capture interface: v2.00 [ 0.409576] pps_core: LinuxPPS API ver. 1 registered [ 0.409593] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.409624] PTP clock support registered [ 0.409955] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.410582] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.410682] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.411662] Registered efivars operations [ 0.412154] FPGA manager framework [ 0.412294] Advanced Linux Sound Architecture Driver Initialized. [ 0.413054] Bluetooth: Core ver 2.22 [ 0.413128] NET: Registered protocol family 31 [ 0.413145] Bluetooth: HCI device and connection manager initialized [ 0.413166] Bluetooth: HCI socket layer initialized [ 0.413208] Bluetooth: L2CAP socket layer initialized [ 0.413239] Bluetooth: SCO socket layer initialized [ 0.415133] camchar: rtcpu character device driver loaded [ 0.416148] clocksource: Switched to clocksource arch_sys_counter [ 0.831794] VFS: Disk quotas dquot_6.6.0 [ 0.831936] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.832382] pnp: PnP ACPI: disabled [ 0.846583] la/ptsa driver initialized. [ 0.846795] NET: Registered protocol family 2 [ 0.847151] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.861728] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.861910] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.862625] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.863261] TCP: Hash tables configured (established 131072 bind 65536) [ 0.863450] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.863687] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.864061] NET: Registered protocol family 1 [ 0.864958] RPC: Registered named UNIX socket transport module. [ 0.864991] RPC: Registered udp transport module. [ 0.865006] RPC: Registered tcp transport module. [ 0.865020] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.865054] PCI: CLS 0 bytes, default 64 [ 0.865432] Trying to unpack rootfs image as initramfs... [ 1.141744] Freeing initrd memory: 8208K [ 1.146917] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.147385] kvm [1]: IPA Size Limit: 40 bits [ 1.147906] kvm [1]: vgic interrupt IRQ9 [ 1.148522] kvm [1]: VHE mode initialized successfully [ 1.150208] Initialise system trusted keyrings [ 1.150577] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 1.157522] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.158358] NFS: Registering the id_resolver key type [ 1.158419] Key type id_resolver registered [ 1.158435] Key type id_legacy registered [ 1.158544] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.158568] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.158625] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.168725] NET: Registered protocol family 38 [ 1.168751] Key type asymmetric registered [ 1.168766] Asymmetric key parser 'x509' registered [ 1.168816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.169066] io scheduler mq-deadline registered [ 1.169084] io scheduler kyber registered [ 1.175054] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.178228] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.178309] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.178379] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.178447] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.178515] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.184239] scrncapt: init (heads:4 wins:6 planes:4) [ 1.184361] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.185409] EINJ: ACPI disabled. [ 1.188639] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.188669] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.188684] tegra-pmc: ### PMC reset level: L1 [ 1.188724] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.188770] tegra-pmc: PMC Prod config success [ 1.193876] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.217783] random: fast init done [ 1.222498] printk: console [ttyTCU0] enabled [ 2.683028] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.687645] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.692511] arm-smmu 10000000.iommu: stage 1 translation [ 2.697769] arm-smmu 10000000.iommu: stage 2 translation [ 2.703458] arm-smmu 10000000.iommu: nested translation [ 2.708546] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.715716] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.726639] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.729358] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.735705] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.743607] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.748703] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.753428] arm-smmu 12000000.iommu: stage 1 translation [ 2.759196] arm-smmu 12000000.iommu: stage 2 translation [ 2.764362] arm-smmu 12000000.iommu: nested translation [ 2.770049] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.777224] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.787818] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.790345] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.796655] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.804368] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.813870] tegra_profiler: version: 1.150, samples/io: 50/29 [ 2.817333] tegra_profiler: auth: init [ 2.821317] THERMAL EST: found 3 subdevs [ 2.825002] THERMAL EST num_resources: 0 [ 2.828595] [THERMAL EST subdev 0] [ 2.832171] [THERMAL EST subdev 1] [ 2.835308] [THERMAL EST subdev 2] [ 2.838826] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.845333] THERMAL EST: thz register success. [ 2.849522] THERMAL EST: end of probe, return err: 0 [ 2.854742] nvsciipc: loaded module [ 2.862015] tun: Universal TUN/TAP device driver, 1.6 [ 2.864578] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.870587] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.876164] e1000e: Intel(R) PRO/1000 Network Driver [ 2.881086] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.886900] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.892455] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.898653] PPP generic driver version 2.4.2 [ 2.902629] PPP BSD Compression module registered [ 2.907436] PPP Deflate Compression module registered [ 2.912448] PPP MPPE Compression module registered [ 2.917721] usbcore: registered new interface driver r8152 [ 2.923203] usbcore: registered new interface driver asix [ 2.928541] usbcore: registered new interface driver ax88179_178a [ 2.934414] usbcore: registered new interface driver cdc_ether [ 2.940355] usbcore: registered new interface driver net1080 [ 2.945960] usbcore: registered new interface driver cdc_subset [ 2.951986] usbcore: registered new interface driver zaurus [ 2.957738] usbcore: registered new interface driver cdc_ncm [ 2.963377] usbcore: registered new interface driver aqc111 [ 2.969048] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.975343] ohci-pci: OHCI PCI platform driver [ 2.979381] ohci-platform: OHCI generic platform driver [ 2.985295] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.991849] usbcore: registered new interface driver uas [ 2.995680] usbcore: registered new interface driver usb-storage [ 3.002105] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.007830] mousedev: PS/2 mouse device common for all mice [ 3.013087] usbcore: registered new interface driver xpad [ 3.021108] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.023542] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.031655] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.038129] i2c /dev entries driver [ 3.041267] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.047082] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.052706] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.057731] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.063470] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.068635] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.074022] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.087630] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 3.088414] device-mapper: uevent: version 1.0.3 [ 3.090885] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.101751] cpuidle: Initializing cpuidle driver [ 3.105466] sdhci: Secure Digital Host Controller Interface driver [ 3.110170] sdhci: Copyright(c) Pierre Ossman [ 3.114611] Synopsys Designware Multimedia Card Interface Driver [ 3.120820] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.126454] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.127099] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.139984] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.158418] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x2 [ 3.167027] vdd-1v0: supplied by regulator-dummy [ 3.172455] vdd-1v8-hs: supplied by regulator-dummy [ 3.177241] vdd-1v8-ls: supplied by regulator-dummy [ 3.181978] vdd-1v8-ao: supplied by regulator-dummy [ 3.185723] vddio-ddr-1v1: supplied by regulator-dummy [ 3.190034] vdd-rtc: supplied by regulator-dummy [ 3.191611] spmic-ldo1: supplied by regulator-dummy [ 3.192743] vdd-ao-3v3: supplied by regulator-dummy [ 3.198800] vddio-emmc-3v3: supplied by regulator-dummy [ 3.204878] spmic-ldo4: supplied by regulator-dummy [ 3.205998] vdd-usb-3v3: supplied by regulator-dummy [ 3.212021] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.218159] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.223539] spmic-ldo8: supplied by vdd-1v8-ls [ 3.224960] gpio-510 (gpio_default): hogged as output/high [ 3.226807] gpio-511 (gpio_default): hogged as output/high [ 3.233595] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.371872] max77686-rtc max77620-rtc: registered as rtc0 [ 3.372866] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.373174] max77620 4-003c: max77620 probe successful ��rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ��[ 4.067641] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.068750] hid: raw HID events driver (C) Jiri Kosina [ 4.069378] usbcore: registered new interface driver usbhid [ 4.069540] usbhid: USB HID core driver [ 4.071256] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.072383] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ��[ 27.228075] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.303540] Camera-FW on t194-rce-safe ready SHA1=01b72e3c (crt 0.774 ms, total boot 76.269 ms) ��[ 4.157537] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.158068] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.158973] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.159638] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.161084] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.161670] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.162218] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.163438] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (48) [ 4.163652] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.165348] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=01b72e3c1b59ab02ad8c842bed3160278b410129 [ 4.173827] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.180962] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.184819] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.191783] denver_knobs_init:MTS_VERSION:55637613 [ 4.203799] t19x_cache tegra-cache: probed [ 4.206938] optee: probing for conduit method. [ 4.207774] optee: revision 3.19 (18d0f61b) [ 4.209072] optee: dynamic shared memory is enabled [ 4.212936] optee: initialized driver [ 4.219503] nvpmodel: initialized successfully [ 4.220052] tegra_hv: get_hvd: not initialized yet [ 4.224730] user_ivc_mempool: hypervisor not present [ 4.230984] usbcore: registered new interface driver snd-usb-audio [ 4.237262] u32 classifier [ 4.238707] input device check on [ 4.242624] Actions configured [ 4.246136] Initializing XFRM netlink socket [ 4.250884] NET: Registered protocol family 10 [ 4.257096] Segment Routing with IPv6 [ 4.258308] NET: Registered protocol family 17 [ 4.262354] NET: Registered protocol family 15 [ 4.267034] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.280625] Bluetooth: RFCOMM socket layer initialized [ 4.285282] Bluetooth: RFCOMM ver 1.11 [ 4.288901] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.295011] Bluetooth: HIDP socket layer initialized [ 4.300447] 9pnet: Installing 9P2000 support [ 4.304459] Key type dns_resolver registered [ 4.309550] registered taskstats version 1 [ 4.312829] Loading compiled-in X.509 certificates [ 4.325880] Loaded X.509 cert 'Build time autogenerated kernel key: d2e6b29ce3ba3f3d31103e414d71889f8474be7b' [ 4.328884] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.339036] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.340974] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.349471] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.357501] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.472286] tegra194-pcie 14160000.pcie: Link up [ 4.475553] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.475763] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.475913] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.476194] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.476423] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.476780] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.477209] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.487363] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.487930] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.488541] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.490023] pci 0004:01:00.0: supports D1 D2 [ 4.490167] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.499133] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.499524] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.499783] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.500457] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.500735] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.500983] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.507158] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.514492] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.522744] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.533063] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.538326] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.543424] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.550290] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.558783] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.560996] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.569173] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.577871] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.692722] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.693335] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.693508] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.693681] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.693896] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.694102] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.694434] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.694825] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.708774] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.709325] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.711180] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.712779] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.714100] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.715691] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.716584] pci 0005:00:00.0: Removing from iommu group 7 [ 5.716870] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.746703] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.768623] host1x 13e10000.host1x: initialized [ 5.770436] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.771305] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.772751] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.773474] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.774502] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.775153] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.776113] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.776831] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.786238] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.792669] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.802890] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.809839] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.819937] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.826586] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.836713] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.843800] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.853836] falcon 15340000.vic: Adding to iommu group 17 [ 5.867531] falcon 15340000.vic: initialized [ 5.868467] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.873400] falcon 15380000.nvjpg: initialized [ 5.873988] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.886558] falcon 154c0000.nvenc: initialized [ 5.887343] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.896528] falcon 15a80000.nvenc1: initialized [ 5.897115] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.908380] nvdec 15480000.nvdec: initialized [ 5.908936] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.917983] nvdec 15140000.nvdec1: initialized [ 5.918569] tsec 15500000.tsec: Adding to iommu group 18 [ 5.924534] tsec 15500000.tsec: initialized [ 5.925048] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.933522] tsec 15100000.tsecb: initialized [ 5.937326] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.965231] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.978509] gpio-374 (wifi-enable): hogged as output/high [ 5.978840] gpio-431 (camera-control-output-low): hogged as output/low [ 5.979103] gpio-432 (camera-control-output-low): hogged as output/low [ 5.980817] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.982542] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.983131] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.984953] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.990111] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.996042] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.001649] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.009409] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.017397] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.028489] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.034213] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.039898] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.048648] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.058028] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.065649] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.072965] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.078976] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.088632] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.095103] pva 16000000.pva0: Adding to iommu group 22 [ 6.120189] pva 16000000.pva0: initialized [ 6.125722] pva 16800000.pva1: Adding to iommu group 23 [ 6.144674] pva 16800000.pva1: initialized [ 6.148630] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.161293] nvdla 15880000.nvdla0: initialized [ 6.162499] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.170540] nvdla 158c0000.nvdla1: initialized [ 6.172877] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.173126] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.173480] tegradccommon 15200000.display-hub: dma mapping done [ 6.175106] tegradc 15200000.display: Adding to iommu group 26 [ 6.177000] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.177374] generic_infoframe_type: 0x87 [ 6.177632] tegradc 15200000.display: DT parsed successfully [ 6.177891] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.185195] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=62 [ 6.186433] tegradc 15210000.display: Adding to iommu group 26 [ 6.191266] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.193332] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.202655] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.208914] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.216620] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.222367] tegra_cec 3960000.tegra_cec: probed [ 6.230568] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.243626] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.244230] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.249225] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.255080] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.268609] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.269555] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.274129] kfuse 3830000.kfuse: initialized [ 6.285966] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.286272] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.294368] tegradc 15210000.display: disp0 connected to head1->sor [ 6.298935] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.299579] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.305334] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.312647] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.317932] tegradc 15210000.display: DT parsed successfully [ 6.326463] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.333405] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.353924] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.362818] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.368655] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.387214] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.387592] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.391837] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.400026] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.408438] tegra-xusb 3610000.xhci: irq 187, io mem 0x03610000 [ 6.415574] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.423104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.430166] usb usb1: Product: xHCI Host Controller [ 6.434810] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.441390] usb usb1: SerialNumber: 3610000.xhci [ 6.446689] hub 1-0:1.0: USB hub found [ 6.450027] hub 1-0:1.0: 4 ports detected [ 6.454618] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.459119] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.466958] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.474666] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.482506] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.489490] usb usb2: Product: xHCI Host Controller [ 6.494728] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.500684] usb usb2: SerialNumber: 3610000.xhci [ 6.506034] hub 2-0:1.0: USB hub found [ 6.509188] hub 2-0:1.0: 4 ports detected [ 6.548773] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.553650] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.554725] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.554907] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.569043] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.570019] tegra194-cpufreq ccplex: probed with BWMGR [ 6.571155] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.571761] irq: IRQ261: trimming hierarchy from :pmc@c360000 [ 6.573784] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.579112] tegra194-vi5 15c10000.vi: initialized [ 6.580198] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.581374] generic_infoframe_type: 0x87 [ 6.581924] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.583017] mmc0: CQHCI version 5.10 [ 6.585623] tegradc 15200000.display: DT parsed successfully [ 6.591933] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.595314] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.601026] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.601037] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.609725] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.612028] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.617068] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.623601] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.623605] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.623966] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.630308] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.638658] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.639905] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.646293] nvethernet 2490000.ethernet: Failed to read DMA Tx ring size, using default [1024] [ 6.652913] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.655600] tegradc 15200000.display: probed [ 6.661030] nvethernet 2490000.ethernet: Failed to read DMA Tx ring size, using default [1024] [ 6.698591] mmc0: Command Queue Engine enabled [ 6.712222] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.715565] mmc0: periodic cache flush enabled [ 6.724513] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.724556] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.724589] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.725941] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:76:3c:e1 [ 6.725988] nvethernet 2490000.ethernet: Macsec not supported [ 6.727223] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.728550] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.728700] irq: IRQ264: trimming hierarchy from :interrupt-controller@3881000 [ 6.728714] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.728832] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.729293] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.729422] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.733270] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 [ 6.829750] Console: switching to colour frame buffer device 80x30 [ 6.830680] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.835545] tegradc 15200000.display: fb registered [ 6.835600] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.843445] tegra-se-nvhost 15810000.se: initialized [ 6.847188] tegradc 15210000.display: disp1 connected to head1->sor [ 6.857819] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.863757] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.870215] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.877067] tegradc 15210000.display: DT parsed successfully [ 6.883876] tegra-se-nvhost 15820000.se: initialized [ 6.888928] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.889000] tegradc 15210000.display: vblank syncpt # 14 for dc 1 [ 6.896035] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.901509] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.909377] tegradc 15210000.display: probed [ 6.914397] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.931202] tegradc 15210000.display: fb registered [ 6.931916] tegra-se-nvhost 15830000.se: initialized [ 6.938408] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.939736] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.939742] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.939749] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.942096] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.949138] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.956885] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.964330] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.964338] usb 1-2: Manufacturer: Generic [ 6.970348] tegra-se-nvhost 15840000.se: initialized [ 6.977716] hub 1-2:1.0: USB hub found [ 6.984945] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.990439] hub 1-2:1.0: 4 ports detected [ 6.995081] tegra_actmon d230000.actmon: in actmon_register()... [ 7.022546] tegradc 15210000.display: blank - powerdown [ 7.022688] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.028045] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.028049] Extcon DP: HPD disabled [ 7.028054] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.028087] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.033898] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.041766] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.045028] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.046021] hvc_sysfs: hypervisor is not present [ 7.085723] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.092970] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.100318] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.105051] usb 2-3: Manufacturer: Generic [ 7.113208] ALSA device list: [ 7.113289] No soundcards found. [ 7.116665] Freeing unused kernel memory: 3968K [ 7.119994] hub 2-3:1.0: USB hub found [ 7.120572] Run /init as init process [ 7.126171] hub 2-3:1.0: 4 ports detected [ 7.188646] Root device found: PARTUUID=6ac019ac-23e9-481e-b11b-632234d2fdd1 ��WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ��[ 7.212196] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.296199] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.296366] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.361496] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.361689] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.361843] usb 1-3: Product: Bluetooth Radio [ 7.361951] usb 1-3: Manufacturer: Realtek [ 7.362038] usb 1-3: SerialNumber: 00e04c000001 [ 7.450071] random: crng init done [ 7.654979] EXT4-fs (mmcblk0p1): recovery complete [ 7.655128] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.665782] Rootfs mounted over PARTUUID=6ac019ac-23e9-481e-b11b-632234d2fdd1 [ 7.700910] Switching from initrd to actual rootfs [ 7.711307] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 [ 7.711499] CPU: 1 PID: 1 Comm: chroot Not tainted 5.10.104-tegra #1 [ 7.711630] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 2.1-32413640 01/24/2023 [ 7.711892] Call trace: [ 7.711957] dump_backtrace+0x0/0x1d0 [ 7.712032] show_stack+0x30/0x40 [ 7.712104] dump_stack+0xd8/0x138 [ 7.712174] panic+0x17c/0x384 [ 7.712242] do_exit+0xaa8/0xab0 [ 7.712313] do_group_exit+0x4c/0xb0 [ 7.712387] __arm64_sys_exit_group+0x28/0x30 [ 7.712480] el0_svc_common.constprop.0+0x80/0x1d0 [ 7.712581] do_el0_svc+0x38/0xb0 [ 7.712653] el0_svc+0x1c/0x30 [ 7.712716] el0_sync_handler+0xa8/0xb0 [ 7.712797] el0_sync+0x16c/0x180 [ 7.712869] SMP: stopping secondary CPUs [ 7.712968] Kernel Offset: 0x5a9dbefc0000 from 0xffff800010000000 [ 7.713329] PHYS_OFFSET: 0xffffe95640000000 [ 7.713625] CPU features: 0x8240002,03802a30 [ 7.713940] Memory Limit: none [ 7.714917] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 ]--- �� [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.5.0.0-t194-41334769-d9272b5a) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x2 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 46000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.188] I> Qspi flash params source = mb1bct [0000.201] I> Qspi flash params source = mb1bct [0000.235] I> Qspi flash params source = mb1bct [0000.799] I> Qspi flash params source = mb1bct [0000.816] I> Qspi flash params source = mb1bct [0000.855] W> Platform config not found in BCT [0000.882] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ����main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init �� [0000.917] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-78ae5a2a) [0000.918] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.918] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.919] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.925] W> device prod register failed [0000.928] I> gpio framework initialized [0000.932] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.939] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.947] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.956] I> qspi flash-0 params source = boot args [0000.961] I> QSPI-0l initialized successfully [0000.965] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 23 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.043] I> Relocating BR-BCT [0002.044] > DEVICE_PROD: device prod is not initialized. [0002.356] I> Relocating OP-TEE dtb from: 0x6bfff240 to 0x70050000, size: 1008 [0002.357] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.357] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.358] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.358] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.358] I> dram_block larger than 80000000 [0002.361] I> [4] START: 0x100000000, SIZE: 0x380000000 [0002.372] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.375] I> found decompressor handler: lz4 [0002.766] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.768] I> Setting EKB blob info to OPTEE dtb finished. ��NOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:29, Jan 24 2023 I/TC: �� bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ��I/TC: Non-��clk_early initialized ��secur��mail_early initialized ��e��fuse initialized hwwdt initialized �� exte��t194_ec_get_ec_list: found 45 ecs ��rnal DT fou��ec initialized vmon_setup_monitors: found 3 monitors vmon initialized ��adc initialized �� ��fmon_populate_monitors: found 73 monitors ����fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ��I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:��clk_dt_late initialized ��2��noc_late initialized ��0��pm_post initialized dbells initialized ��:42��dmce initialized �� ��cvc initialized ��UTC 2023 aar��avfs_clk_mach_post initialized ��ch64��avfs_clk_platform_post initialized �� ��cvc_late initialized regulator_post initialized ��I/T��rm initialized console_late initialized clk_dt_post initialized mc_reg initialized ��C: WARNING: This OP-TEE configuration ��pg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ��might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot �� [0003.396] I> Welcome to NVDisp-Init [0003.396] I> NVDisp-Init version: t194-709c0123 [0003.397] I> CPU-BL Params @ 0xca020000 [0003.397] I> 0) Base:0x00000000 Size:0x00000000 [0003.397] I> 1) Base:0xc8300000 Size:0x00100000 [0003.398] I> 2) Base:0xc9800000 Size:0x00200000 [0003.398] I> 3) Base:0xc8600000 Size:0x00200000 [0003.400] I> 4) Base:0xc8200000 Size:0x00100000 [0003.405] I> 5) Base:0xc8100000 Size:0x00100000 [0003.409] I> 6) Base:0xc9400000 Size:0x00400000 [0003.414] I> 7) Base:0xc9000000 Size:0x00400000 [0003.418] I> 8) Base:0xc8000000 Size:0x00100000 [0003.423] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.427] I> 10) Base:0xca800000 Size:0x00800000 [0003.432] I> 11) Base:0x40000000 Size:0x00040000 [0003.436] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.441] I> 13) Base:0x40046000 Size:0x00002000 [0003.445] I> 14) Base:0x40048000 Size:0x00002000 [0003.450] I> 15) Base:0xaf000000 Size:0x00004000 [0003.454] I> 16) Base:0x4004a000 Size:0x00002000 [0003.458] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.463] I> 18) Base:0x4004c000 Size:0x00002000 [0003.467] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.472] I> 20) Base:0x4004e000 Size:0x00002000 [0003.476] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.481] I> 22) Base:0x00000000 Size:0x00000000 [0003.485] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.490] I> 24) Base:0xcc000000 Size:0x02000000 [0003.494] I> 25) Base:0x40050000 Size:0x00002000 [0003.499] I> 26) Base:0x40040000 Size:0x00006000 [0003.503] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.508] I> 28) Base:0xc8400000 Size:0x00200000 [0003.512] I> 29) Base:0xc8800000 Size:0x00400000 [0003.516] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.521] I> 31) Base:0x00000000 Size:0x00000000 [0003.525] I> 32) Base:0xf8000000 Size:0x08000000 [0003.530] I> 33) Base:0xce000000 Size:0x2a000000 [0003.534] I> 34) Base:0xcb000000 Size:0x01000000 [0003.539] I> 35) Base:0xae000000 Size:0x01000000 [0003.543] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.548] I> 37) Base:0xca000000 Size:0x00800000 [0003.552] I> 38) Base:0x80000000 Size:0x20000000 [0003.557] I> 39) Base:0xb0000000 Size:0x08000000 [0003.561] I> 40) Base:0x00000000 Size:0x00000000 [0003.566] I> 41) Base:0x00000000 Size:0x00000000 [0003.570] I> 42) Base:0x00000000 Size:0x00000000 [0003.574] I> 43) Base:0x00000000 Size:0x00000000 [0003.579] I> 44) Base:0x00000000 Size:0x00000000 [0003.583] I> 45) Base:0x00000000 Size:0x00000000 [0003.588] GIC-SPI Target CPU: 0 [0003.591] Interrupts Init done [0003.594] calling constructors [0003.597] initializing heap [0003.599] I> Heap: [0xa0960000 ... 0xadf00000] [0003.604] initializing threads [0003.606] initializing timers [0003.609] creating bootstrap completion thread [0003.614] top of bootstrap2() [0003.616] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.621] initializing platform [0003.624] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.629] W> device prod register failed [0003.633] I> Bl_dtb @0xadf00000 [0003.636] I> gpio framework initialized [0003.647] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.652] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.659] I> fixed regulator driver initialized [0003.676] I> register 'maxim' power off handle [0003.679] I> virtual i2c enabled [0003.679] I> registered 'maxim,max20024' pmic [0003.679] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.680] I> Boot-device: QSPI [0003.680] I> Boot_device: QSPI_FLASH instance: 0 [0003.685] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.695] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.703] I> QSPI source rate = 204000 Khz [0003.706] I> Requested rate for QSPI clock = 34000 Khz [0003.711] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.716] I> tx_clk_tap_delay : 0 [0003.719] I> rx_clk_tap_delay : 16 [0003.722] I> QSPI Flash Size = 32 MB [0003.730] I> Qspi initialized successfully [0003.730] I> qspi flash-0 params source = boot args [0003.735] W> No board IDs available [0003.737] E> Failed to get board id info! [0003.743] I> sdmmc-3 params source = safe params [0003.750] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.752] W> Cannot find any partition table for 00000003 [0003.756] E> Failed to publish 00000003 [0003.761] I> Found 23 partitions in SDMMC_USER (instance 3) [0003.785] I> regulator 'vdd-hdmi-5v0' already enabled [0003.791] I> regulator 'vdd-hdmi-5v0' already enabled [0003.792] E> tegrabl_display_init_regulator: hdmi cable is not connected [0003.792] E> tegrabl_display_get_pdata, failed to parse dtb settings [0003.793] E> cannot find any other nvdisp nodes [0003.794] E> no valid display unit config found in dtb [0003.800] W> display init failed [0003.800] initializing target [0003.803] calling apps_init() [0003.806] starting app kernel_boot_app [0003.810] I> Kernel type = Normal Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** ...... L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ��I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ��[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6348-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Tue Jan 24 3 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x459daab18 SMBIOS=0xc7db0000 SMBIOS 3.0=0x458980000 MEMATTR=0x45917a018 ESRT=0x45896f618 RNG=0x47c55dd18 MEMRESERVE=0x459183f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000045896f618 to 0x000000045896f650. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000047fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000045855dfff] [ 0.000000] node 0: [mem 0x000000045855e000-0x0000000458712fff] [ 0.000000] node 0: [mem 0x0000000458713000-0x000000045896ffff] [ 0.000000] node 0: [mem 0x0000000458970000-0x000000045898ffff] [ 0.000000] node 0: [mem 0x0000000458990000-0x0000000458c6ffff] [ 0.000000] node 0: [mem 0x0000000458c70000-0x0000000458cbffff] [ 0.000000] node 0: [mem 0x0000000458cc0000-0x000000045911ffff] [ 0.000000] node 0: [mem 0x0000000459120000-0x000000045914ffff] [ 0.000000] node 0: [mem 0x0000000459150000-0x000000045918ffff] [ 0.000000] node 0: [mem 0x0000000459190000-0x00000004591affff] [ 0.000000] node 0: [mem 0x00000004591b0000-0x000000045928ffff] [ 0.000000] node 0: [mem 0x0000000459290000-0x000000045932ffff] [ 0.000000] node 0: [mem 0x0000000459330000-0x000000045934ffff] [ 0.000000] node 0: [mem 0x0000000459350000-0x000000045939ffff] [ 0.000000] node 0: [mem 0x00000004593a0000-0x00000004593effff] [ 0.000000] node 0: [mem 0x00000004593f0000-0x00000004597fffff] [ 0.000000] node 0: [mem 0x0000000459800000-0x000000045984ffff] [ 0.000000] node 0: [mem 0x0000000459850000-0x000000045989ffff] [ 0.000000] node 0: [mem 0x00000004598a0000-0x0000000459d7ffff] [ 0.000000] node 0: [mem 0x0000000459d80000-0x0000000459d8ffff] [ 0.000000] node 0: [mem 0x0000000459d90000-0x0000000459efffff] [ 0.000000] node 0: [mem 0x0000000459f00000-0x0000000459f9ffff] [ 0.000000] node 0: [mem 0x0000000459fa0000-0x000000045a09ffff] [ 0.000000] node 0: [mem 0x000000045a0a0000-0x000000045a13ffff] [ 0.000000] node 0: [mem 0x000000045a140000-0x000000045a1effff] [ 0.000000] node 0: [mem 0x000000045a1f0000-0x000000045a28ffff] [ 0.000000] node 0: [mem 0x000000045a290000-0x000000045ab9ffff] [ 0.000000] node 0: [mem 0x000000045aba0000-0x000000045ad7ffff] [ 0.000000] node 0: [mem 0x000000045ad80000-0x000000047c50ffff] [ 0.000000] node 0: [mem 0x000000047c510000-0x000000047c55ffff] [ 0.000000] node 0: [mem 0x000000047c560000-0x000000047fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000047fffffff] [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3903653 [ 0.000000] Kernel command line: root=PARTUUID=6ac019ac-23e9-481e-b11b-632234d2fdd1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 15189276K/15862464K available (18432K kernel code, 3168K rwdata, 7164K rodata, 3968K init, 1110K bss, 607652K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000006] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000782] Console: colour dummy device 80x25 [ 0.002250] printk: console [tty0] enabled [ 0.002314] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002350] pid_max: default: 32768 minimum: 301 [ 0.002528] LSM: Security Framework initializing [ 0.002586] Yama: becoming mindful. [ 0.002634] SELinux: Initializing. [ 0.002810] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.002865] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.006025] rcu: Hierarchical SRCU implementation. [ 0.006281] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007197] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007266] DTB Build time: Jan 24 2023 15:26:08 [ 0.010300] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010544] Remapping and enabling EFI services. [ 0.011840] smp: Bringing up secondary CPUs ... [ 0.044586] Detected PIPT I-cache on CPU1 [ 0.044695] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074277] Detected PIPT I-cache on CPU2 [ 0.074375] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103984] Detected PIPT I-cache on CPU3 [ 0.104137] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133989] Detected PIPT I-cache on CPU4 [ 0.134102] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163747] Detected PIPT I-cache on CPU5 [ 0.163977] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164336] smp: Brought up 1 node, 6 CPUs [ 0.164514] SMP: Total of 6 processors activated. [ 0.164586] CPU features: detected: Privileged Access Never [ 0.164612] CPU features: detected: LSE atomic instructions [ 0.164626] CPU features: detected: User Access Override [ 0.164639] CPU features: detected: 32-bit EL0 Support [ 0.164652] CPU features: detected: RAS Extension Support [ 0.164664] CPU features: detected: CRC32 instructions [ 0.164678] CPU features: detected: 32-bit EL1 Support [ 0.231660] CPU: All CPU(s) started at EL2 [ 0.238546] devtmpfs: initialized [ 0.286942] Registered cp15_barrier emulation handler [ 0.287070] Registered setend emulation handler [ 0.287096] KASLR enabled [ 0.287344] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287370] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288585] pinctrl core: initialized pinctrl subsystem [ 0.289528] SMBIOS 3.0.0 present. [ 0.289561] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 2.1-32413640 01/24/2023 [ 0.290185] NET: Registered protocol family 16 [ 0.292267] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.293222] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294468] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294524] audit: initializing netlink subsys (disabled) [ 0.294876] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295277] thermal_sys: Registered thermal governor 'step_wise' [ 0.295283] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295299] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297852] cpuidle: using governor menu [ 0.298236] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298685] ASID allocator initialised with 32768 entries [ 0.298928] Serial: AMBA PL011 UART driver [ 0.302126] Tegra reboot handler registered. [ 0.373657] mc: mapped MMIO address: 0xffff800010880000 -> 0x2c10000 [ 0.373705] mc: mapped MMIO address: 0xffff8000108a0000 -> 0x2c20000 [ 0.373757] mc: mapped MMIO address: 0xffff8000108c0000 -> 0x2c30000 [ 0.373787] mc: mapped MMIO address: 0xffff8000108e0000 -> 0x2c40000 [ 0.373831] mc: mapped MMIO address: 0xffff800010900000 -> 0x2c50000 [ 0.373860] mc: mapped MMIO address: 0xffff800010920000 -> 0x2b80000 [ 0.373887] mc: mapped MMIO address: 0xffff800010940000 -> 0x2b90000 [ 0.373913] mc: mapped MMIO address: 0xffff800010960000 -> 0x2ba0000 [ 0.373939] mc: mapped MMIO address: 0xffff800010980000 -> 0x2bb0000 [ 0.373965] mc: mapped MMIO address: 0xffff8000109a0000 -> 0x1700000 [ 0.373991] mc: mapped MMIO address: 0xffff8000109c0000 -> 0x1710000 [ 0.374017] mc: mapped MMIO address: 0xffff8000109e0000 -> 0x1720000 [ 0.374051] mc: mapped MMIO address: 0xffff800010a00000 -> 0x1730000 [ 0.374078] mc: mapped MMIO address: 0xffff800010a20000 -> 0x1740000 [ 0.374105] mc: mapped MMIO address: 0xffff800010a40000 -> 0x1750000 [ 0.374130] mc: mapped MMIO address: 0xffff800010a60000 -> 0x1760000 [ 0.374181] mc: mapped MMIO address: 0xffff800010a80000 -> 0x1770000 [ 0.374301] mc-err: mcerr ops are set to t19x [ 0.385878] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.385906] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.385918] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.385930] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.394553] ACPI: Interpreter disabled. [ 0.396204] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.397958] iommu: Default domain type: Translated [ 0.398063] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.398581] SCSI subsystem initialized [ 0.398820] usbcore: registered new interface driver usbfs [ 0.398907] usbcore: registered new interface driver hub [ 0.398958] usbcore: registered new device driver usb [ 0.399625] mc: Linux media interface: v0.10 [ 0.399679] videodev: Linux video capture interface: v2.00 [ 0.400110] pps_core: LinuxPPS API ver. 1 registered [ 0.400126] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400183] PTP clock support registered [ 0.400501] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.400941] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401038] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.401892] Registered efivars operations [ 0.402430] FPGA manager framework [ 0.402548] Advanced Linux Sound Architecture Driver Initialized. [ 0.403125] Bluetooth: Core ver 2.22 [ 0.403174] NET: Registered protocol family 31 [ 0.403186] Bluetooth: HCI device and connection manager initialized [ 0.403222] Bluetooth: HCI socket layer initialized [ 0.403234] Bluetooth: L2CAP socket layer initialized [ 0.403270] Bluetooth: SCO socket layer initialized [ 0.405723] camchar: rtcpu character device driver loaded [ 0.406811] clocksource: Switched to clocksource arch_sys_counter [ 0.816745] VFS: Disk quotas dquot_6.6.0 [ 0.816844] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.817315] pnp: PnP ACPI: disabled [ 0.831652] la/ptsa driver initialized. [ 0.831830] NET: Registered protocol family 2 [ 0.832130] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.846493] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.846711] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.847448] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.848073] TCP: Hash tables configured (established 131072 bind 65536) [ 0.848228] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.848470] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.848844] NET: Registered protocol family 1 [ 0.849802] RPC: Registered named UNIX socket transport module. [ 0.849825] RPC: Registered udp transport module. [ 0.849835] RPC: Registered tcp transport module. [ 0.849845] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.849876] PCI: CLS 0 bytes, default 64 [ 0.850083] Trying to unpack rootfs image as initramfs... [ 1.037964] Freeing initrd memory: 8208K [ 1.041612] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.041905] kvm [1]: IPA Size Limit: 40 bits [ 1.042304] kvm [1]: vgic interrupt IRQ9 [ 1.042858] kvm [1]: VHE mode initialized successfully [ 1.044214] Initialise system trusted keyrings [ 1.044500] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 1.049322] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.049998] NFS: Registering the id_resolver key type [ 1.050027] Key type id_resolver registered [ 1.050037] Key type id_legacy registered [ 1.050133] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.050151] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.050203] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.057943] NET: Registered protocol family 38 [ 1.057963] Key type asymmetric registered [ 1.057974] Asymmetric key parser 'x509' registered [ 1.058015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.058210] io scheduler mq-deadline registered [ 1.058244] io scheduler kyber registered [ 1.062371] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.064467] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.064526] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.064573] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.064630] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.064694] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.068772] scrncapt: init (heads:4 wins:6 planes:4) [ 1.069174] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.069779] EINJ: ACPI disabled. [ 1.072061] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.072085] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.072095] tegra-pmc: ### PMC reset level: L1 [ 1.072104] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.072166] tegra-pmc: PMC Prod config success [ 1.076440] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.080704] random: fast init done [ 1.081481] printk: console [ttyTCU0] enabled [ 2.564404] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.569589] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.574205] arm-smmu 10000000.iommu: stage 1 translation [ 2.579354] arm-smmu 10000000.iommu: stage 2 translation [ 2.585111] arm-smmu 10000000.iommu: nested translation [ 2.590192] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.597364] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.606748] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.611009] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.617317] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.625140] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.630353] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.635077] arm-smmu 12000000.iommu: stage 1 translation [ 2.640852] arm-smmu 12000000.iommu: stage 2 translation [ 2.646010] arm-smmu 12000000.iommu: nested translation [ 2.651705] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.658617] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.667858] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.672010] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.678557] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.685675] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.695747] tegra_profiler: version: 1.150, samples/io: 50/29 [ 2.698687] tegra_profiler: auth: init [ 2.703037] THERMAL EST: found 3 subdevs [ 2.706633] THERMAL EST num_resources: 0 [ 2.710246] [THERMAL EST subdev 0] [ 2.713564] [THERMAL EST subdev 1] [ 2.717231] [THERMAL EST subdev 2] [ 2.720217] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.726621] THERMAL EST: thz register success. [ 2.731177] THERMAL EST: end of probe, return err: 0 [ 2.736469] nvsciipc: loaded module [ 2.742600] tun: Universal TUN/TAP device driver, 1.6 [ 2.745481] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.752249] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.757547] e1000e: Intel(R) PRO/1000 Network Driver [ 2.762484] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.768808] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.773850] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.779899] PPP generic driver version 2.4.2 [ 2.784534] PPP BSD Compression module registered [ 2.789103] PPP Deflate Compression module registered [ 2.794331] PPP MPPE Compression module registered [ 2.799082] usbcore: registered new interface driver r8152 [ 2.804846] usbcore: registered new interface driver asix [ 2.809917] usbcore: registered new interface driver ax88179_178a [ 2.816041] usbcore: registered new interface driver cdc_ether [ 2.822035] usbcore: registered new interface driver net1080 [ 2.827855] usbcore: registered new interface driver cdc_subset [ 2.833892] usbcore: registered new interface driver zaurus [ 2.839601] usbcore: registered new interface driver cdc_ncm [ 2.845263] usbcore: registered new interface driver aqc111 [ 2.850935] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.856733] ohci-pci: OHCI PCI platform driver [ 2.861310] ohci-platform: OHCI generic platform driver [ 2.866806] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.873000] usbcore: registered new interface driver uas [ 2.877592] usbcore: registered new interface driver usb-storage [ 2.883415] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.889320] mousedev: PS/2 mouse device common for all mice [ 2.894472] usbcore: registered new interface driver xpad [ 2.902494] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.905229] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.913269] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.919741] i2c /dev entries driver [ 2.923128] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.928565] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.933964] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.939379] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.944909] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.950436] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.955880] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.967959] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.968527] device-mapper: uevent: version 1.0.3 [ 2.972790] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.982892] cpuidle: Initializing cpuidle driver [ 2.986550] sdhci: Secure Digital Host Controller Interface driver [ 2.991822] sdhci: Copyright(c) Pierre Ossman [ 2.996009] Synopsys Designware Multimedia Card Interface Driver [ 3.002184] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.008216] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.008880] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.021538] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.040830] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x2 [ 3.049712] vdd-1v0: supplied by regulator-dummy [ 3.055094] vdd-1v8-hs: supplied by regulator-dummy [ 3.059896] vdd-1v8-ls: supplied by regulator-dummy [ 3.064548] vdd-1v8-ao: supplied by regulator-dummy [ 3.068287] vddio-ddr-1v1: supplied by regulator-dummy [ 3.072560] vdd-rtc: supplied by regulator-dummy [ 3.074155] spmic-ldo1: supplied by regulator-dummy [ 3.075318] vdd-ao-3v3: supplied by regulator-dummy [ 3.081377] vddio-emmc-3v3: supplied by regulator-dummy [ 3.087510] spmic-ldo4: supplied by regulator-dummy [ 3.088682] vdd-usb-3v3: supplied by regulator-dummy [ 3.094818] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.100990] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.106597] spmic-ldo8: supplied by vdd-1v8-ls [ 3.107946] gpio-510 (gpio_default): hogged as output/high [ 3.109200] gpio-511 (gpio_default): hogged as output/high [ 3.115044] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.253565] max77686-rtc max77620-rtc: registered as rtc0 [ 3.254803] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.255108] max77620 4-003c: max77620 probe successful ��rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ��[ 3.979811] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.980949] hid: raw HID events driver (C) Jiri Kosina [ 3.981741] usbcore: registered new interface driver usbhid [ 3.981902] usbhid: USB HID core driver [ 3.984351] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.985694] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ��[ 27.121436] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.195517] Camera-FW on t194-rce-safe ready SHA1=01b72e3c (crt 0.774 ms, total boot 74.885 ms) ��[ 4.069671] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.070211] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.071074] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.071690] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.073373] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.074219] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.074712] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.076186] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (48) [ 4.076517] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.079696] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=01b72e3c1b59ab02ad8c842bed3160278b410129 [ 4.086264] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.094125] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.097857] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.104208] denver_knobs_init:MTS_VERSION:55637613 [ 4.117626] t19x_cache tegra-cache: probed [ 4.121929] optee: probing for conduit method. [ 4.122720] optee: revision 3.19 (18d0f61b) [ 4.123728] optee: dynamic shared memory is enabled [ 4.125746] optee: initialized driver [ 4.131980] nvpmodel: initialized successfully [ 4.132656] tegra_hv: get_hvd: not initialized yet [ 4.136929] user_ivc_mempool: hypervisor not present [ 4.143622] usbcore: registered new interface driver snd-usb-audio [ 4.149483] u32 classifier [ 4.151009] input device check on [ 4.154524] Actions configured [ 4.158016] Initializing XFRM netlink socket [ 4.162955] NET: Registered protocol family 10 [ 4.169350] Segment Routing with IPv6 [ 4.170457] NET: Registered protocol family 17 [ 4.174729] NET: Registered protocol family 15 [ 4.178887] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.192577] Bluetooth: RFCOMM socket layer initialized [ 4.197507] Bluetooth: RFCOMM ver 1.11 [ 4.201328] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.206938] Bluetooth: HIDP socket layer initialized [ 4.213060] 9pnet: Installing 9P2000 support [ 4.216600] Key type dns_resolver registered [ 4.221836] registered taskstats version 1 [ 4.225084] Loading compiled-in X.509 certificates [ 4.238609] Loaded X.509 cert 'Build time autogenerated kernel key: d2e6b29ce3ba3f3d31103e414d71889f8474be7b' [ 4.240848] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.250513] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.252757] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.261280] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.269958] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.386940] tegra194-pcie 14160000.pcie: Link up [ 4.390737] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.391190] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.391442] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.391769] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.391944] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.392401] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.392856] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.405531] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.406090] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.406581] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.408309] pci 0004:01:00.0: supports D1 D2 [ 4.408472] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.421118] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.421455] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.421800] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.422364] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.422724] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.423022] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.423358] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.429129] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.437395] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.448303] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.452396] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.458254] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.465399] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.475256] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.475698] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.484248] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.492355] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.607965] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.608721] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.608938] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.609147] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.609421] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.609604] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.610044] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.610460] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.626681] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.627061] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.628801] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.629902] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.631479] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.633002] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.633835] pci 0005:00:00.0: Removing from iommu group 7 [ 5.634154] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.664041] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.685073] host1x 13e10000.host1x: initialized [ 5.686393] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.687331] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.688360] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.688997] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.689986] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.690525] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.691517] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.692028] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.701068] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.708054] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.717818] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.725272] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.734909] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.742177] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.751751] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.758857] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.768716] falcon 15340000.vic: Adding to iommu group 17 [ 5.782513] falcon 15340000.vic: initialized [ 5.783448] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.788947] falcon 15380000.nvjpg: initialized [ 5.789520] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.801889] falcon 154c0000.nvenc: initialized [ 5.802487] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.811957] falcon 15a80000.nvenc1: initialized [ 5.812503] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.823535] nvdec 15480000.nvdec: initialized [ 5.824074] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.833524] nvdec 15140000.nvdec1: initialized [ 5.834243] tsec 15500000.tsec: Adding to iommu group 18 [ 5.839898] tsec 15500000.tsec: initialized [ 5.840413] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.849581] tsec 15100000.tsecb: initialized [ 5.853280] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.878907] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.890957] gpio-374 (wifi-enable): hogged as output/high [ 5.891242] gpio-431 (camera-control-output-low): hogged as output/low [ 5.891505] gpio-432 (camera-control-output-low): hogged as output/low [ 5.893403] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.895385] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.896007] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.900364] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.905446] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.911380] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.917027] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.925234] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.932490] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.943936] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.949298] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.955271] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.963873] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.973282] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.980738] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.988802] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.994219] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.003997] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.010138] pva 16000000.pva0: Adding to iommu group 22 [ 6.036355] pva 16000000.pva0: initialized [ 6.041258] pva 16800000.pva1: Adding to iommu group 23 [ 6.059659] pva 16800000.pva1: initialized [ 6.063968] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.077018] nvdla 15880000.nvdla0: initialized [ 6.078215] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.086674] nvdla 158c0000.nvdla1: initialized [ 6.089196] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=62 [ 6.089513] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.090002] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.090374] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.090399] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.091304] tegradccommon 15200000.display-hub: dma mapping done [ 6.091334] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.094114] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.099647] tegra_cec 3960000.tegra_cec: probed [ 6.107986] tegradc 15200000.display: Adding to iommu group 26 [ 6.108079] tegradc 15210000.display: Adding to iommu group 26 [ 6.108247] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.110731] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.112047] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.112136] generic_infoframe_type: 0x87 [ 6.112291] tegradc 15200000.display: DT parsed successfully [ 6.112380] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.139038] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.145155] kfuse 3830000.kfuse: initialized [ 6.152750] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.152758] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.165528] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.174226] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.181418] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.187516] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.188129] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.207496] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.213832] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.228939] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.230722] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.236828] tegradc 15210000.display: disp0 connected to head1->sor [ 6.241913] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.247530] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.257652] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.263982] tegradc 15210000.display: DT parsed successfully [ 6.270312] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.275275] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.294200] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.301375] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.306670] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.315208] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.323924] tegra-xusb 3610000.xhci: irq 187, io mem 0x03610000 [ 6.330510] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.337920] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.345481] usb usb1: Product: xHCI Host Controller [ 6.350159] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.356525] usb usb1: SerialNumber: 3610000.xhci [ 6.362262] hub 1-0:1.0: USB hub found [ 6.365025] hub 1-0:1.0: 4 ports detected [ 6.369585] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.374332] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.381949] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.389678] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.397514] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.404758] usb usb2: Product: xHCI Host Controller [ 6.409756] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.416236] usb usb2: SerialNumber: 3610000.xhci [ 6.421398] hub 2-0:1.0: USB hub found [ 6.424771] hub 2-0:1.0: 4 ports detected [ 6.465460] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.470650] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.472019] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.472199] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.486732] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.487765] tegra194-cpufreq ccplex: probed with BWMGR [ 6.488926] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.489542] irq: IRQ261: trimming hierarchy from :pmc@c360000 [ 6.491792] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.499591] tegra194-vi5 15c10000.vi: initialized [ 6.500784] mmc0: CQHCI version 5.10 [ 6.500869] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.501130] generic_infoframe_type: 0x87 [ 6.503076] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.504527] tegradc 15200000.display: DT parsed successfully [ 6.510669] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.516056] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.524505] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.538686] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.545588] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.552124] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.558669] nvethernet 2490000.ethernet: Failed to read DMA Tx ring size, using default [1024] [ 6.566805] nvethernet 2490000.ethernet: Failed to read DMA Tx ring size, using default [1024] [ 6.575497] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.582899] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.583863] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.586838] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.590253] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.598449] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.612741] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.621112] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.626816] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.627089] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.635681] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:76:3c:e1 [ 6.642200] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.654911] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.662074] nvethernet 2490000.ethernet: Macsec not supported [ 6.672555] tegradc 15200000.display: probed [ 6.676912] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.688494] Console: switching to colour frame buffer device 80x30 [ 6.689457] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.694361] tegradc 15200000.display: fb registered [ 6.704981] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.706525] mmc0: Command Queue Engine enabled [ 6.710833] irq: IRQ265: trimming hierarchy from :interrupt-controller@3881000 [ 6.715006] mmc0: periodic cache flush enabled [ 6.715021] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.722200] tegradc 15210000.display: disp1 connected to head1->sor [ 6.722300] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.723658] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.725403] tegra-se-nvhost 15810000.se: initialized [ 6.727242] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.732156] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.732724] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.733110] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.733557] tegra-se-nvhost 15820000.se: initialized [ 6.735711] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.736180] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.736852] tegra-se-nvhost 15830000.se: initialized [ 6.738257] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.738730] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.739451] tegra-se-nvhost 15840000.se: initialized [ 6.739625] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.746116] tegradc 15210000.display: DT parsed successfully [ 6.750429] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 [ 6.754179] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.757216] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.763490] tegra_actmon d230000.actmon: in actmon_register()... [ 6.774240] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.781764] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.786723] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.793138] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.807063] tegradc 15210000.display: probed [ 6.811028] hvc_sysfs: hypervisor is not present [ 6.825912] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.857739] ALSA device list: [ 6.857803] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.863928] No soundcards found. [ 6.920756] tegradc 15210000.display: fb registered [ 6.920785] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.924508] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.924514] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.924520] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.943826] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.945296] usb 1-2: Manufacturer: Generic [ 6.962050] tegradc 15210000.display: blank - powerdown [ 6.967550] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.967554] Extcon DP: HPD disabled [ 6.967557] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.967571] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.976689] Freeing unused kernel memory: 3968K [ 6.979048] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.985675] Run /init as init process [ 6.985820] hub 1-2:1.0: USB hub found [ 6.992144] hub 1-2:1.0: 4 ports detected [ 6.999784] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.999805] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.999809] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.999812] usb 2-3: Manufacturer: Generic [ 7.011997] hub 2-3:1.0: USB hub found [ 7.025151] hub 2-3:1.0: 4 ports detected [ 7.099527] Root device found: PARTUUID=6ac019ac-23e9-481e-b11b-632234d2fdd1 [ 7.106862] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.107062] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ��WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ��[ 7.138825] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.288057] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.288249] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.288397] usb 1-3: Product: Bluetooth Radio [ 7.288494] usb 1-3: Manufacturer: Realtek [ 7.288592] usb 1-3: SerialNumber: 00e04c000001 [ 7.355284] random: crng init done [ 7.565443] EXT4-fs (mmcblk0p1): recovery complete [ 7.565595] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.576992] Rootfs mounted over PARTUUID=6ac019ac-23e9-481e-b11b-632234d2fdd1 [ 7.611612] Switching from initrd to actual rootfs [ 7.622200] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 [ 7.622403] CPU: 3 PID: 1 Comm: chroot Not tainted 5.10.104-tegra #1 [ 7.622540] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 2.1-32413640 01/24/2023 [ 7.622803] Call trace: [ 7.622868] dump_backtrace+0x0/0x1d0 [ 7.622944] show_stack+0x30/0x40 [ 7.623021] dump_stack+0xd8/0x138 [ 7.623092] panic+0x17c/0x384 [ 7.623160] do_exit+0xaa8/0xab0 [ 7.623231] do_group_exit+0x4c/0xb0 [ 7.623307] __arm64_sys_exit_group+0x28/0x30 [ 7.623399] el0_svc_common.constprop.0+0x80/0x1d0 [ 7.623503] do_el0_svc+0x38/0xb0 [ 7.623596] el0_svc+0x1c/0x30 [ 7.623661] el0_sync_handler+0xa8/0xb0 [ 7.623744] el0_sync+0x16c/0x180 [ 7.623827] SMP: stopping secondary CPUs [ 7.623924] Kernel Offset: 0x2ef114330000 from 0xffff800010000000 [ 7.624217] PHYS_OFFSET: 0xffff9fafc0000000 [ 7.624497] CPU features: 0x8240002,03802a30 [ 7.624812] Memory Limit: none [ 7.625814] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 ]--- �� [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.5.0.0-t194-41334769-d9272b5a) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x2 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 48000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.189] I> Qspi flash params source = mb1bct [0000.202] I> Qspi flash params source = mb1bct [0000.236] I> Qspi flash params source = mb1bct [0000.800] I> Qspi flash params source = mb1bct [0000.817] I> Qspi flash params source = mb1bct [0000.856] W> Platform config not found in BCT [0000.883] I> Qspi flash params source = mb1bct [0000.908] I> MB1 done ����main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init �� [0000.918] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-78ae5a2a) [0000.919] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.919] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.920] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.926] W> device prod register failed [0000.929] I> gpio framework initialized [0000.933] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.940] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.948] I> No valid sdcard_params in mb1_bct [0000.952] I> Boot_device: QSPI_FLASH instance: 0 [0000.957] I> qspi flash-0 params source = boot args [0000.962] I> QSPI-0l initialized successfully [0000.966] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 23 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.044] I> Relocating BR-BCT [0002.045] > DEVICE_PROD: device prod is not initialized. [0002.357] I> Relocating OP-TEE dtb from: 0x6bfff240 to 0x70050000, size: 1008 [0002.358] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.358] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.359] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.359] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.359] I> dram_block larger than 80000000 [0002.362] I> [4] START: 0x100000000, SIZE: 0x380000000 [0002.373] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.377] I> found decompressor handler: lz4 [0002.766] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.767] I> Setting EKB blob info to OPTEE dtb finished. ��NOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:29, Jan 24 2023 I/TC: �� bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ��I/TC: Non-��clk_early initialized ��secu��mail_early initialized ��re��fuse initialized hwwdt initialized �� exte��t194_ec_get_ec_list: found 45 ecs ��rnal DT fou��ec initialized vmon_setup_monitors: found 3 monitors vmon initialized ��adc initialized fmon_populate_monitors: found 73 monitors �� ��fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ��I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:��clk_dt_late initialized ��2��noc_late initialized pm_post initialized dbells initialized ��0:42��dmce initialized cvc initialized �� UTC 2023 aa��avfs_clk_mach_post initialized ��rch64��avfs_clk_platform_post initialized �� ��cvc_late initialized regulator_post initialized ��I/��rm initialized console_late initialized clk_dt_post initialized mc_reg initialized ��TC: WARNING: This OP-TEE configuratio��pg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ��n might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot �� [0003.395] I> Welcome to NVDisp-Init [0003.395] I> NVDisp-Init version: t194-709c0123 [0003.396] I> CPU-BL Params @ 0xca020000 [0003.396] I> 0) Base:0x00000000 Size:0x00000000 [0003.396] I> 1) Base:0xc8300000 Size:0x00100000 [0003.396] I> 2) Base:0xc9800000 Size:0x00200000 [0003.397] I> 3) Base:0xc8600000 Size:0x00200000 [0003.399] I> 4) Base:0xc8200000 Size:0x00100000 [0003.404] I> 5) Base:0xc8100000 Size:0x00100000 [0003.408] I> 6) Base:0xc9400000 Size:0x00400000 [0003.413] I> 7) Base:0xc9000000 Size:0x00400000 [0003.417] I> 8) Base:0xc8000000 Size:0x00100000 [0003.422] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.426] I> 10) Base:0xca800000 Size:0x00800000 [0003.431] I> 11) Base:0x40000000 Size:0x00040000 [0003.435] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.439] I> 13) Base:0x40046000 Size:0x00002000 [0003.444] I> 14) Base:0x40048000 Size:0x00002000 [0003.448] I> 15) Base:0xaf000000 Size:0x00004000 [0003.453] I> 16) Base:0x4004a000 Size:0x00002000 [0003.457] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.462] I> 18) Base:0x4004c000 Size:0x00002000 [0003.466] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.471] I> 20) Base:0x4004e000 Size:0x00002000 [0003.475] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.480] I> 22) Base:0x00000000 Size:0x00000000 [0003.484] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.489] I> 24) Base:0xcc000000 Size:0x02000000 [0003.493] I> 25) Base:0x40050000 Size:0x00002000 [0003.497] I> 26) Base:0x40040000 Size:0x00006000 [0003.502] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.506] I> 28) Base:0xc8400000 Size:0x00200000 [0003.511] I> 29) Base:0xc8800000 Size:0x00400000 [0003.515] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.520] I> 31) Base:0x00000000 Size:0x00000000 [0003.524] I> 32) Base:0xf8000000 Size:0x08000000 [0003.529] I> 33) Base:0xce000000 Size:0x2a000000 [0003.533] I> 34) Base:0xcb000000 Size:0x01000000 [0003.538] I> 35) Base:0xae000000 Size:0x01000000 [0003.542] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.547] I> 37) Base:0xca000000 Size:0x00800000 [0003.551] I> 38) Base:0x80000000 Size:0x20000000 [0003.555] I> 39) Base:0xb0000000 Size:0x08000000 [0003.560] I> 40) Base:0x00000000 Size:0x00000000 [0003.564] I> 41) Base:0x00000000 Size:0x00000000 [0003.569] I> 42) Base:0x00000000 Size:0x00000000 [0003.573] I> 43) Base:0x00000000 Size:0x00000000 [0003.578] I> 44) Base:0x00000000 Size:0x00000000 [0003.582] I> 45) Base:0x00000000 Size:0x00000000 [0003.587] GIC-SPI Target CPU: 0 [0003.590] Interrupts Init done [0003.593] calling constructors [0003.595] initializing heap [0003.598] I> Heap: [0xa0960000 ... 0xadf00000] [0003.602] initializing threads [0003.605] initializing timers [0003.608] creating bootstrap completion thread [0003.612] top of bootstrap2() [0003.615] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.620] initializing platform [0003.623] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.628] W> device prod register failed [0003.632] I> Bl_dtb @0xadf00000 [0003.635] I> gpio framework initialized [0003.646] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.651] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.659] I> fixed regulator driver initialized [0003.670] I> register 'maxim' power off handle [0003.672] I> virtual i2c enabled [0003.672] I> registered 'maxim,max20024' pmic [0003.672] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.676] I> Boot-device: QSPI [0003.679] I> Boot_device: QSPI_FLASH instance: 0 [0003.684] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.694] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.702] I> QSPI source rate = 204000 Khz [0003.705] I> Requested rate for QSPI clock = 34000 Khz [0003.710] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.715] I> tx_clk_tap_delay : 0 [0003.717] I> rx_clk_tap_delay : 16 [0003.721] I> QSPI Flash Size = 32 MB [0003.729] I> Qspi initialized successfully [0003.729] I> qspi flash-0 params source = boot args [0003.733] W> No board IDs available [0003.736] E> Failed to get board id info! [0003.742] I> sdmmc-3 params source = safe params [0003.749] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.751] W> Cannot find any partition table for 00000003 [0003.755] E> Failed to publish 00000003 [0003.760] I> Found 23 partitions in SDMMC_USER (instance 3) [0003.779] I> regulator 'vdd-hdmi-5v0' already enabled [0003.786] I> regulator 'vdd-hdmi-5v0' already enabled [0003.786] E> tegrabl_display_init_regulator: hdmi cable is not connected [0003.787] E> tegrabl_display_get_pdata, failed to parse dtb settings [0003.788] E> cannot find any other nvdisp nodes [0003.791] E> no valid display unit config found in dtb [0003.799] W> display init failed [0003.799] initializing target [0003.802] calling apps_init() [0003.805] starting app kernel_boot_app [0003.808] I> Kernel type = Normal Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** ...... Switching the bootchain. Resetting the system in 2 seconds. ����Shutdown state requested 1 Rebooting system ... �� [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.5.0.0-t194-41334769-d9272b5a) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x2 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 47000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.189] I> Qspi flash params source = mb1bct [0000.202] I> Qspi flash params source = mb1bct [0000.236] I> Qspi flash params source = mb1bct [0000.800] I> Qspi flash params source = mb1bct [0000.816] I> Qspi flash params source = mb1bct [0000.856] W> Platform config not found in BCT [0000.883] I> Qspi flash params source = mb1bct [0000.908] I> MB1 done ����main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init �� [0000.917] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-78ae5a2a) [0000.918] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.919] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.920] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.925] W> device prod register failed [0000.929] I> gpio framework initialized [0000.933] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.940] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.948] I> No valid sdcard_params in mb1_bct [0000.952] I> Boot_device: QSPI_FLASH instance: 0 [0000.956] I> qspi flash-0 params source = boot args [0000.962] I> QSPI-0l initialized successfully [0000.965] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 23 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.041] I> Relocating BR-BCT [0002.042] > DEVICE_PROD: device prod is not initialized. [0002.354] I> Relocating OP-TEE dtb from: 0x6bfff240 to 0x70050000, size: 1008 [0002.355] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.355] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.356] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.356] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.356] I> dram_block larger than 80000000 [0002.359] I> [4] START: 0x100000000, SIZE: 0x380000000 [0002.370] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.373] I> found decompressor handler: lz4 [0002.764] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.765] I> Setting EKB blob info to OPTEE dtb finished. ��NOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:29, Jan 24 2023 I/TC: �� bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ��I/TC: Non-s��clk_early initialized ��ecur��mail_early initialized ��e ��fuse initialized hwwdt initialized ��exte��t194_ec_get_ec_list: found 45 ecs ��rnal DT fou��ec initialized vmon_setup_monitors: found 3 monitors vmon initialized ��nd ��adc initialized fmon_populate_monitors: found 73 monitors ����fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ��I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:��clk_dt_late initialized ��2��noc_late initialized ��0��pm_post initialized dbells initialized ��:42��dmce initialized �� ��cvc initialized ��UTC 2023 aar��avfs_clk_mach_post initialized ��ch64��avfs_clk_platform_post initialized �� ��cvc_late initialized regulator_post initialized ��I/T��rm initialized console_late initialized clk_dt_post initialized mc_reg initialized ��C: WARNING: This OP-TEE configuration ��pg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ��might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot �� [0003.394] I> Welcome to NVDisp-Init [0003.394] I> NVDisp-Init version: t194-709c0123 [0003.394] I> CPU-BL Params @ 0xca020000 [0003.395] I> 0) Base:0x00000000 Size:0x00000000 [0003.395] I> 1) Base:0xc8300000 Size:0x00100000 [0003.395] I> 2) Base:0xc9800000 Size:0x00200000 [0003.395] I> 3) Base:0xc8600000 Size:0x00200000 [0003.398] I> 4) Base:0xc8200000 Size:0x00100000 [0003.403] I> 5) Base:0xc8100000 Size:0x00100000 [0003.407] I> 6) Base:0xc9400000 Size:0x00400000 [0003.411] I> 7) Base:0xc9000000 Size:0x00400000 [0003.416] I> 8) Base:0xc8000000 Size:0x00100000 [0003.420] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.425] I> 10) Base:0xca800000 Size:0x00800000 [0003.429] I> 11) Base:0x40000000 Size:0x00040000 [0003.434] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.438] I> 13) Base:0x40046000 Size:0x00002000 [0003.443] I> 14) Base:0x40048000 Size:0x00002000 [0003.447] I> 15) Base:0xaf000000 Size:0x00004000 [0003.452] I> 16) Base:0x4004a000 Size:0x00002000 [0003.456] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.461] I> 18) Base:0x4004c000 Size:0x00002000 [0003.465] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.469] I> 20) Base:0x4004e000 Size:0x00002000 [0003.474] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.478] I> 22) Base:0x00000000 Size:0x00000000 [0003.483] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.487] I> 24) Base:0xcc000000 Size:0x02000000 [0003.492] I> 25) Base:0x40050000 Size:0x00002000 [0003.496] I> 26) Base:0x40040000 Size:0x00006000 [0003.501] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.505] I> 28) Base:0xc8400000 Size:0x00200000 [0003.510] I> 29) Base:0xc8800000 Size:0x00400000 [0003.514] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.519] I> 31) Base:0x00000000 Size:0x00000000 [0003.523] I> 32) Base:0xf8000000 Size:0x08000000 [0003.527] I> 33) Base:0xce000000 Size:0x2a000000 [0003.532] I> 34) Base:0xcb000000 Size:0x01000000 [0003.536] I> 35) Base:0xae000000 Size:0x01000000 [0003.541] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.545] I> 37) Base:0xca000000 Size:0x00800000 [0003.550] I> 38) Base:0x80000000 Size:0x20000000 [0003.554] I> 39) Base:0xb0000000 Size:0x08000000 [0003.559] I> 40) Base:0x00000000 Size:0x00000000 [0003.563] I> 41) Base:0x00000000 Size:0x00000000 [0003.568] I> 42) Base:0x00000000 Size:0x00000000 [0003.572] I> 43) Base:0x00000000 Size:0x00000000 [0003.577] I> 44) Base:0x00000000 Size:0x00000000 [0003.581] I> 45) Base:0x00000000 Size:0x00000000 [0003.585] GIC-SPI Target CPU: 0 [0003.588] Interrupts Init done [0003.591] calling constructors [0003.594] initializing heap [0003.597] I> Heap: [0xa0960000 ... 0xadf00000] [0003.601] initializing threads [0003.604] initializing timers [0003.607] creating bootstrap completion thread [0003.611] top of bootstrap2() [0003.614] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.619] initializing platform [0003.622] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.627] W> device prod register failed [0003.631] I> Bl_dtb @0xadf00000 [0003.634] I> gpio framework initialized [0003.644] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.649] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.656] I> fixed regulator driver initialized [0003.673] I> register 'maxim' power off handle [0003.675] I> virtual i2c enabled [0003.676] I> registered 'maxim,max20024' pmic [0003.676] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.677] I> Boot-device: QSPI [0003.678] I> Boot_device: QSPI_FLASH instance: 0 [0003.682] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.693] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.700] I> QSPI source rate = 204000 Khz [0003.703] I> Requested rate for QSPI clock = 34000 Khz [0003.709] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.713] I> tx_clk_tap_delay : 0 [0003.716] I> rx_clk_tap_delay : 16 [0003.719] I> QSPI Flash Size = 32 MB [0003.727] I> Qspi initialized successfully [0003.728] I> qspi flash-0 params source = boot args [0003.732] W> No board IDs available [0003.735] E> Failed to get board id info! [0003.741] I> sdmmc-3 params source = safe params [0003.748] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.749] W> Cannot find any partition table for 00000003 [0003.754] E> Failed to publish 00000003 [0003.758] I> Found 23 partitions in SDMMC_USER (instance 3) [0003.780] I> regulator 'vdd-hdmi-5v0' already enabled [0003.786] I> regulator 'vdd-hdmi-5v0' already enabled [0003.787] E> tegrabl_display_init_regulator: hdmi cable is not connected [0003.787] E> tegrabl_display_get_pdata, failed to parse dtb settings [0003.789] E> cannot find any other nvdisp nodes [0003.790] E> no valid display unit config found in dtb [0003.797] W> display init failed [0003.798] initializing target [0003.801] calling apps_init() [0003.804] starting app kernel_boot_app [0003.807] I> Kernel type = Normal Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. Rebooting to new boot chain ����Shutdown state requested 1 Rebooting system ... �� [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.5.0.0-t194-41334769-d9272b5a) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x2 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 1 [0000.089] I> BR-BCT Boot-Chain: 1, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 46500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.188] I> Qspi flash params source = mb1bct [0000.202] I> Qspi flash params source = mb1bct [0000.235] I> Qspi flash params source = mb1bct [0000.800] I> Qspi flash params source = mb1bct [0000.816] I> Qspi flash params source = mb1bct [0000.856] W> Platform config not found in BCT [0000.882] I> Qspi flash params source = mb1bct [0000.908] I> MB1 done ����main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init �� [0000.917] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-78ae5a2a) [0000.918] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.918] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.919] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.925] W> device prod register failed [0000.929] I> gpio framework initialized [0000.932] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.940] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.947] I> No valid sdcard_params in mb1_bct [0000.952] I> Boot_device: QSPI_FLASH instance: 0 [0000.956] I> qspi flash-0 params source = boot args [0000.962] I> QSPI-0l initialized successfully [0000.965] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 23 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 1 [0001.911] I> Relocating BR-BCT [0001.912] > DEVICE_PROD: device prod is not initialized. [0002.014] I> Relocating OP-TEE dtb from: 0x6bfff240 to 0x70050000, size: 1008 [0002.015] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.015] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.016] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.016] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.016] I> dram_block larger than 80000000 [0002.019] I> [4] START: 0x100000000, SIZE: 0x380000000 [0002.030] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.033] I> found decompressor handler: lz4 [0002.435] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.436] I> Setting EKB blob info to OPTEE dtb finished. ��NOTICE: BL31: v2.6(release):6363e7382 NOTICE: BL31: Built : 15:09:29, Jan 24 2023 I/TC: �� bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ��I/TC: Non-��clk_early initialized ��secu��mail_early initialized ��re��fuse initialized hwwdt initialized �� exte��t194_ec_get_ec_list: found 45 ecs ��rnal DT fo��ec initialized ��u��vmon_setup_monitors: found 3 monitors vmon initialized ��adc initialized fmon_populate_monitors: found 73 monitors �� ��fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ��I/TC: OP-TEE version: 3.19 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue Jan 24 23:��clk_dt_late initialized ��2��noc_late initialized pm_post initialized dbells initialized ��0:4��dmce initialized ��2��cvc initialized �� UTC 2023 aa��avfs_clk_mach_post initialized ��rch64��avfs_clk_platform_post initialized �� ��cvc_late initialized regulator_post initialized ��I/��rm initialized console_late initialized clk_dt_post initialized mc_reg initialized ��TC: WARNING: This OP-TEE configuration��pg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] �� might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot �� [0003.064] I> Welcome to NVDisp-Init [0003.064] I> NVDisp-Init version: t194-709c0123 [0003.065] I> CPU-BL Params @ 0xca020000 [0003.065] I> 0) Base:0x00000000 Size:0x00000000 [0003.065] I> 1) Base:0xc8300000 Size:0x00100000 [0003.066] I> 2) Base:0xc9800000 Size:0x00200000 [0003.066] I> 3) Base:0xc8600000 Size:0x00200000 [0003.068] I> 4) Base:0xc8200000 Size:0x00100000 [0003.073] I> 5) Base:0xc8100000 Size:0x00100000 [0003.077] I> 6) Base:0xc9400000 Size:0x00400000 [0003.082] I> 7) Base:0xc9000000 Size:0x00400000 [0003.086] I> 8) Base:0xc8000000 Size:0x00100000 [0003.091] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.095] I> 10) Base:0xca800000 Size:0x00800000 [0003.100] I> 11) Base:0x40000000 Size:0x00040000 [0003.104] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.109] I> 13) Base:0x40046000 Size:0x00002000 [0003.113] I> 14) Base:0x40048000 Size:0x00002000 [0003.118] I> 15) Base:0xaf000000 Size:0x00004000 [0003.122] I> 16) Base:0x4004a000 Size:0x00002000 [0003.126] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.131] I> 18) Base:0x4004c000 Size:0x00002000 [0003.135] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.140] I> 20) Base:0x4004e000 Size:0x00002000 [0003.144] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.149] I> 22) Base:0x00000000 Size:0x00000000 [0003.153] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.158] I> 24) Base:0xcc000000 Size:0x02000000 [0003.162] I> 25) Base:0x40050000 Size:0x00002000 [0003.167] I> 26) Base:0x40040000 Size:0x00006000 [0003.171] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.176] I> 28) Base:0xc8400000 Size:0x00200000 [0003.180] I> 29) Base:0xc8800000 Size:0x00400000 [0003.184] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.189] I> 31) Base:0x00000000 Size:0x00000000 [0003.193] I> 32) Base:0xf8000000 Size:0x08000000 [0003.198] I> 33) Base:0xce000000 Size:0x2a000000 [0003.202] I> 34) Base:0xcb000000 Size:0x01000000 [0003.207] I> 35) Base:0xae000000 Size:0x01000000 [0003.211] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.216] I> 37) Base:0xca000000 Size:0x00800000 [0003.220] I> 38) Base:0x80000000 Size:0x20000000 [0003.225] I> 39) Base:0xb0000000 Size:0x08000000 [0003.229] I> 40) Base:0x00000000 Size:0x00000000 [0003.234] I> 41) Base:0x00000000 Size:0x00000000 [0003.238] I> 42) Base:0x00000000 Size:0x00000000 [0003.242] I> 43) Base:0x00000000 Size:0x00000000 [0003.247] I> 44) Base:0x00000000 Size:0x00000000 [0003.251] I> 45) Base:0x00000000 Size:0x00000000 [0003.256] GIC-SPI Target CPU: 0 [0003.259] Interrupts Init done [0003.262] calling constructors [0003.265] initializing heap [0003.267] I> Heap: [0xa0960000 ... 0xadf00000] [0003.272] initializing threads [0003.274] initializing timers [0003.277] creating bootstrap completion thread [0003.282] top of bootstrap2() [0003.284] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.289] initializing platform [0003.292] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.297] W> device prod register failed [0003.301] I> Bl_dtb @0xadf00000 [0003.304] I> gpio framework initialized [0003.315] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.320] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.326] I> fixed regulator driver initialized [0003.339] I> register 'maxim' power off handle [0003.341] I> virtual i2c enabled [0003.342] I> registered 'maxim,max20024' pmic [0003.342] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.345] I> Boot-device: QSPI [0003.348] I> Boot_device: QSPI_FLASH instance: 0 [0003.353] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.363] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.371] I> QSPI source rate = 204000 Khz [0003.374] I> Requested rate for QSPI clock = 34000 Khz [0003.379] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.384] I> tx_clk_tap_delay : 0 [0003.387] I> rx_clk_tap_delay : 16 [0003.390] I> QSPI Flash Size = 32 MB [0003.398] I> Qspi initialized successfully [0003.398] I> qspi flash-0 params source = boot args [0003.402] W> No board IDs available [0003.405] E> Failed to get board id info! [0003.411] I> sdmmc-3 params source = safe params [0003.418] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.420] W> Cannot find any partition table for 00000003 [0003.424] E> Failed to publish 00000003 [0003.429] I> Found 23 partitions in SDMMC_USER (instance 3) [0003.450] I> regulator 'vdd-hdmi-5v0' already enabled [0003.455] I> regulator 'vdd-hdmi-5v0' already enabled [0003.456] E> tegrabl_display_init_regulator: hdmi cable is not connected [0003.456] E> tegrabl_display_get_pdata, failed to parse dtb settings [0003.457] E> cannot find any other nvdisp nodes [0003.460] E> no valid display unit config found in dtb [0003.468] W> display init failed [0003.468] initializing target [0003.471] calling apps_init() [0003.474] starting app kernel_boot_app [0003.478] I> Kernel type = Normal Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) Jetson UEFI firmware (version 2.1-32413640 built on 2023-01-24T23:12:27+00:00) ESC to enter Setup. F11 to enter Boot Manager Menu. Enter to continue boot. ** WARNING: Test Key is used. ** ...... L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ��I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ��[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6348-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Tue Jan 24 3 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x459daab18 SMBIOS=0xc7db0000 SMBIOS 3.0=0x458980000 MEMATTR=0x45917a018 ESRT=0x4591b2618 RNG=0x47c55dd18 MEMRESERVE=0x459183f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000004591b2618 to 0x00000004591b2650. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000047fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000045855dfff] [ 0.000000] node 0: [mem 0x000000045855e000-0x0000000458712fff] [ 0.000000] node 0: [mem 0x0000000458713000-0x000000045896ffff] [ 0.000000] node 0: [mem 0x0000000458970000-0x000000045898ffff] [ 0.000000] node 0: [mem 0x0000000458990000-0x0000000458c6ffff] [ 0.000000] node 0: [mem 0x0000000458c70000-0x0000000458cbffff] [ 0.000000] node 0: [mem 0x0000000458cc0000-0x000000045911ffff] [ 0.000000] node 0: [mem 0x0000000459120000-0x000000045914ffff] [ 0.000000] node 0: [mem 0x0000000459150000-0x000000045918ffff] [ 0.000000] node 0: [mem 0x0000000459190000-0x00000004591affff] [ 0.000000] node 0: [mem 0x00000004591b0000-0x000000045928ffff] [ 0.000000] node 0: [mem 0x0000000459290000-0x000000045932ffff] [ 0.000000] node 0: [mem 0x0000000459330000-0x000000045934ffff] [ 0.000000] node 0: [mem 0x0000000459350000-0x000000045939ffff] [ 0.000000] node 0: [mem 0x00000004593a0000-0x00000004593effff] [ 0.000000] node 0: [mem 0x00000004593f0000-0x00000004597fffff] [ 0.000000] node 0: [mem 0x0000000459800000-0x000000045984ffff] [ 0.000000] node 0: [mem 0x0000000459850000-0x000000045989ffff] [ 0.000000] node 0: [mem 0x00000004598a0000-0x0000000459d7ffff] [ 0.000000] node 0: [mem 0x0000000459d80000-0x0000000459d8ffff] [ 0.000000] node 0: [mem 0x0000000459d90000-0x0000000459efffff] [ 0.000000] node 0: [mem 0x0000000459f00000-0x0000000459f9ffff] [ 0.000000] node 0: [mem 0x0000000459fa0000-0x000000045a09ffff] [ 0.000000] node 0: [mem 0x000000045a0a0000-0x000000045a13ffff] [ 0.000000] node 0: [mem 0x000000045a140000-0x000000045a1effff] [ 0.000000] node 0: [mem 0x000000045a1f0000-0x000000045a28ffff] [ 0.000000] node 0: [mem 0x000000045a290000-0x000000045ab9ffff] [ 0.000000] node 0: [mem 0x000000045aba0000-0x000000045ad7ffff] [ 0.000000] node 0: [mem 0x000000045ad80000-0x000000047c50ffff] [ 0.000000] node 0: [mem 0x000000047c510000-0x000000047c55ffff] [ 0.000000] node 0: [mem 0x000000047c560000-0x000000047fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000047fffffff] [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3903653 [ 0.000000] Kernel command line: root=PARTUUID=311343f0-ad87-41ef-8d22-84597bf8f501 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 15189280K/15862464K available (18432K kernel code, 3168K rwdata, 7164K rodata, 3968K init, 1110K bss, 607648K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000806] Console: colour dummy device 80x25 [ 0.002269] printk: console [tty0] enabled [ 0.002342] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002379] pid_max: default: 32768 minimum: 301 [ 0.002543] LSM: Security Framework initializing [ 0.002600] Yama: becoming mindful. [ 0.002648] SELinux: Initializing. [ 0.002830] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.002882] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.006418] rcu: Hierarchical SRCU implementation. [ 0.006665] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007687] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007757] DTB Build time: Jan 24 2023 15:26:08 [ 0.010930] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011224] Remapping and enabling EFI services. [ 0.012927] smp: Bringing up secondary CPUs ... [ 0.044090] Detected PIPT I-cache on CPU1 [ 0.044200] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074775] Detected PIPT I-cache on CPU2 [ 0.074926] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104511] Detected PIPT I-cache on CPU3 [ 0.104658] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134310] Detected PIPT I-cache on CPU4 [ 0.134477] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164170] Detected PIPT I-cache on CPU5 [ 0.164314] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164856] smp: Brought up 1 node, 6 CPUs [ 0.165035] SMP: Total of 6 processors activated. [ 0.165115] CPU features: detected: Privileged Access Never [ 0.165155] CPU features: detected: LSE atomic instructions [ 0.165170] CPU features: detected: User Access Override [ 0.165184] CPU features: detected: 32-bit EL0 Support [ 0.165198] CPU features: detected: RAS Extension Support [ 0.165211] CPU features: detected: CRC32 instructions [ 0.165225] CPU features: detected: 32-bit EL1 Support [ 0.238016] CPU: All CPU(s) started at EL2 [ 0.245031] devtmpfs: initialized [ 0.294359] Registered cp15_barrier emulation handler [ 0.294493] Registered setend emulation handler [ 0.294517] KASLR enabled [ 0.294782] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.294810] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296024] pinctrl core: initialized pinctrl subsystem [ 0.297081] SMBIOS 3.0.0 present. [ 0.297122] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 2.1-32413640 01/24/2023 [ 0.297757] NET: Registered protocol family 16 [ 0.300034] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.301001] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.302272] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.302334] audit: initializing netlink subsys (disabled) [ 0.302581] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.303046] thermal_sys: Registered thermal governor 'step_wise' [ 0.303052] thermal_sys: Registered thermal governor 'power_allocator' [ 0.303066] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.305678] cpuidle: using governor menu [ 0.306223] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.306702] ASID allocator initialised with 32768 entries [ 0.306956] Serial: AMBA PL011 UART driver [ 0.310460] Tegra reboot handler registered. [ 0.389256] mc: mapped MMIO address: 0xffff800010880000 -> 0x2c10000 [ 0.389299] mc: mapped MMIO address: 0xffff8000108a0000 -> 0x2c20000 [ 0.389323] mc: mapped MMIO address: 0xffff8000108c0000 -> 0x2c30000 [ 0.389351] mc: mapped MMIO address: 0xffff8000108e0000 -> 0x2c40000 [ 0.389374] mc: mapped MMIO address: 0xffff800010900000 -> 0x2c50000 [ 0.389397] mc: mapped MMIO address: 0xffff800010920000 -> 0x2b80000 [ 0.389420] mc: mapped MMIO address: 0xffff800010940000 -> 0x2b90000 [ 0.389443] mc: mapped MMIO address: 0xffff800010960000 -> 0x2ba0000 [ 0.389485] mc: mapped MMIO address: 0xffff800010980000 -> 0x2bb0000 [ 0.389509] mc: mapped MMIO address: 0xffff8000109a0000 -> 0x1700000 [ 0.389548] mc: mapped MMIO address: 0xffff8000109c0000 -> 0x1710000 [ 0.389571] mc: mapped MMIO address: 0xffff8000109e0000 -> 0x1720000 [ 0.389614] mc: mapped MMIO address: 0xffff800010a00000 -> 0x1730000 [ 0.389640] mc: mapped MMIO address: 0xffff800010a20000 -> 0x1740000 [ 0.389663] mc: mapped MMIO address: 0xffff800010a40000 -> 0x1750000 [ 0.389685] mc: mapped MMIO address: 0xffff800010a60000 -> 0x1760000 [ 0.389707] mc: mapped MMIO address: 0xffff800010a80000 -> 0x1770000 [ 0.389791] mc-err: mcerr ops are set to t19x [ 0.401571] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.401596] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.401609] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.401621] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.408417] ACPI: Interpreter disabled. [ 0.409604] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.411005] iommu: Default domain type: Translated [ 0.411074] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.411464] SCSI subsystem initialized [ 0.411619] usbcore: registered new interface driver usbfs [ 0.411656] usbcore: registered new interface driver hub [ 0.411696] usbcore: registered new device driver usb [ 0.412167] mc: Linux media interface: v0.10 [ 0.412200] videodev: Linux video capture interface: v2.00 [ 0.412537] pps_core: LinuxPPS API ver. 1 registered [ 0.412549] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.412569] PTP clock support registered [ 0.412811] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.413117] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.413211] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.413833] Registered efivars operations [ 0.414315] FPGA manager framework [ 0.414428] Advanced Linux Sound Architecture Driver Initialized. [ 0.415011] Bluetooth: Core ver 2.22 [ 0.415048] NET: Registered protocol family 31 [ 0.415060] Bluetooth: HCI device and connection manager initialized [ 0.415074] Bluetooth: HCI socket layer initialized [ 0.415089] Bluetooth: L2CAP socket layer initialized [ 0.415109] Bluetooth: SCO socket layer initialized [ 0.416447] camchar: rtcpu character device driver loaded [ 0.417165] clocksource: Switched to clocksource arch_sys_counter [ 0.704476] VFS: Disk quotas dquot_6.6.0 [ 0.704574] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.704907] pnp: PnP ACPI: disabled [ 0.714554] la/ptsa driver initialized. [ 0.714666] NET: Registered protocol family 2 [ 0.714907] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.724408] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.724570] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.725046] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.725522] TCP: Hash tables configured (established 131072 bind 65536) [ 0.725651] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.725817] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.726088] NET: Registered protocol family 1 [ 0.727002] RPC: Registered named UNIX socket transport module. [ 0.727033] RPC: Registered udp transport module. [ 0.727048] RPC: Registered tcp transport module. [ 0.727061] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.727084] PCI: CLS 0 bytes, default 64 [ 0.727411] Trying to unpack rootfs image as initramfs... [ 1.005972] Freeing initrd memory: 8208K [ 1.010736] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.011208] kvm [1]: IPA Size Limit: 40 bits [ 1.011701] kvm [1]: vgic interrupt IRQ9 [ 1.012313] kvm [1]: VHE mode initialized successfully [ 1.013988] Initialise system trusted keyrings [ 1.014333] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 1.021503] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.022589] NFS: Registering the id_resolver key type [ 1.022626] Key type id_resolver registered [ 1.022640] Key type id_legacy registered [ 1.022734] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.022757] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.022796] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.034742] NET: Registered protocol family 38 [ 1.034768] Key type asymmetric registered [ 1.034783] Asymmetric key parser 'x509' registered [ 1.034850] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.035132] io scheduler mq-deadline registered [ 1.035152] io scheduler kyber registered [ 1.041107] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.043800] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.043878] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.043946] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.044014] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.044082] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.049603] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.049678] scrncapt: init (heads:4 wins:6 planes:4) [ 1.050684] EINJ: ACPI disabled. [ 1.054093] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.054118] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.054157] tegra-pmc: ### PMC reset level: L1 [ 1.054170] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.054218] tegra-pmc: PMC Prod config success [ 1.060067] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.066003] random: fast init done [ 1.066275] printk: console [ttyTCU0] enabled [ 2.549935] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.554163] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.558998] arm-smmu 10000000.iommu: stage 1 translation [ 2.564342] arm-smmu 10000000.iommu: stage 2 translation [ 2.569735] arm-smmu 10000000.iommu: nested translation [ 2.575048] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.582217] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.594213] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.595569] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.602158] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.610030] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.615195] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.619676] arm-smmu 12000000.iommu: stage 1 translation [ 2.625437] arm-smmu 12000000.iommu: stage 2 translation [ 2.630852] arm-smmu 12000000.iommu: nested translation [ 2.636026] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.643463] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.654691] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.656556] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.662887] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.670621] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.680399] tegra_profiler: version: 1.150, samples/io: 50/29 [ 2.683329] tegra_profiler: auth: init [ 2.687588] THERMAL EST: found 3 subdevs [ 2.691240] THERMAL EST num_resources: 0 [ 2.695080] [THERMAL EST subdev 0] [ 2.698147] [THERMAL EST subdev 1] [ 2.701815] [THERMAL EST subdev 2] [ 2.704784] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.711518] THERMAL EST: thz register success. [ 2.715761] THERMAL EST: end of probe, return err: 0 [ 2.720774] nvsciipc: loaded module [ 2.728370] tun: Universal TUN/TAP device driver, 1.6 [ 2.730803] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.736841] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.742183] e1000e: Intel(R) PRO/1000 Network Driver [ 2.747061] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.753138] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.758699] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.764870] PPP generic driver version 2.4.2 [ 2.768929] PPP BSD Compression module registered [ 2.773411] PPP Deflate Compression module registered [ 2.778655] PPP MPPE Compression module registered [ 2.783671] usbcore: registered new interface driver r8152 [ 2.789442] usbcore: registered new interface driver asix [ 2.794768] usbcore: registered new interface driver ax88179_178a [ 2.800636] usbcore: registered new interface driver cdc_ether [ 2.806861] usbcore: registered new interface driver net1080 [ 2.812444] usbcore: registered new interface driver cdc_subset [ 2.818482] usbcore: registered new interface driver zaurus [ 2.824182] usbcore: registered new interface driver cdc_ncm [ 2.829604] usbcore: registered new interface driver aqc111 [ 2.835509] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.841341] ohci-pci: OHCI PCI platform driver [ 2.845874] ohci-platform: OHCI generic platform driver [ 2.851516] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.858337] usbcore: registered new interface driver uas [ 2.861911] usbcore: registered new interface driver usb-storage [ 2.868350] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.874069] mousedev: PS/2 mouse device common for all mice [ 2.879340] usbcore: registered new interface driver xpad [ 2.887481] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.890091] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.897611] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.904441] i2c /dev entries driver [ 2.907757] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.913335] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.918867] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.924320] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.929464] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.935111] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.940243] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.954809] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.955618] device-mapper: uevent: version 1.0.3 [ 2.957618] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.967984] cpuidle: Initializing cpuidle driver [ 2.971811] sdhci: Secure Digital Host Controller Interface driver [ 2.976154] sdhci: Copyright(c) Pierre Ossman [ 2.980607] Synopsys Designware Multimedia Card Interface Driver [ 2.987084] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.992865] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.993786] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.006171] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.035950] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x2 [ 3.045809] vdd-1v0: supplied by regulator-dummy [ 3.051539] vdd-1v8-hs: supplied by regulator-dummy [ 3.056474] vdd-1v8-ls: supplied by regulator-dummy [ 3.061449] vdd-1v8-ao: supplied by regulator-dummy [ 3.065436] vddio-ddr-1v1: supplied by regulator-dummy [ 3.070088] vdd-rtc: supplied by regulator-dummy [ 3.071946] spmic-ldo1: supplied by regulator-dummy [ 3.073376] vdd-ao-3v3: supplied by regulator-dummy [ 3.079603] vddio-emmc-3v3: supplied by regulator-dummy [ 3.086109] spmic-ldo4: supplied by regulator-dummy [ 3.087512] vdd-usb-3v3: supplied by regulator-dummy [ 3.093845] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.100257] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.105911] spmic-ldo8: supplied by vdd-1v8-ls [ 3.107461] gpio-510 (gpio_default): hogged as output/high [ 3.108807] gpio-511 (gpio_default): hogged as output/high [ 3.111782] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.247705] max77686-rtc max77620-rtc: registered as rtc0 [ 3.248798] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.249148] max77620 4-003c: max77620 probe successful ��rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ��[ 4.105350] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.106707] hid: raw HID events driver (C) Jiri Kosina [ 4.107852] usbcore: registered new interface driver usbhid [ 4.108005] usbhid: USB HID core driver [ 4.110535] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.111868] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ��[ 26.923257] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.996775] Camera-FW on t194-rce-safe ready SHA1=01b72e3c (crt 0.776 ms, total boot 74.323 ms) ��[ 4.195614] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.196379] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.197825] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.198763] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.200629] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.201487] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.202092] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.203754] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (48) [ 4.204180] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.206638] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=01b72e3c1b59ab02ad8c842bed3160278b410129 [ 4.211417] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.218527] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.223395] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.230668] denver_knobs_init:MTS_VERSION:55637613 [ 4.242701] t19x_cache tegra-cache: probed [ 4.245774] optee: probing for conduit method. [ 4.246936] optee: revision 3.19 (18d0f61b) [ 4.248877] optee: dynamic shared memory is enabled [ 4.251658] optee: initialized driver [ 4.257540] nvpmodel: initialized successfully [ 4.258112] tegra_hv: get_hvd: not initialized yet [ 4.262480] user_ivc_mempool: hypervisor not present [ 4.269383] usbcore: registered new interface driver snd-usb-audio [ 4.275194] u32 classifier [ 4.276157] input device check on [ 4.280061] Actions configured [ 4.283549] Initializing XFRM netlink socket [ 4.288440] NET: Registered protocol family 10 [ 4.295777] Segment Routing with IPv6 [ 4.296022] NET: Registered protocol family 17 [ 4.300125] NET: Registered protocol family 15 [ 4.304751] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.318775] Bluetooth: RFCOMM socket layer initialized [ 4.323102] Bluetooth: RFCOMM ver 1.11 [ 4.326751] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.332775] Bluetooth: HIDP socket layer initialized [ 4.338784] 9pnet: Installing 9P2000 support [ 4.341983] Key type dns_resolver registered [ 4.348065] registered taskstats version 1 [ 4.350365] Loading compiled-in X.509 certificates [ 4.364999] Loaded X.509 cert 'Build time autogenerated kernel key: d2e6b29ce3ba3f3d31103e414d71889f8474be7b' [ 4.367039] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.377571] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.378282] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.387161] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.395235] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.513444] tegra194-pcie 14160000.pcie: Link up [ 4.517129] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.517560] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.517724] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.518034] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.518236] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.518625] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.519075] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.531356] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.531847] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.532279] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.534043] pci 0004:01:00.0: supports D1 D2 [ 4.534238] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.544139] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.544556] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.544894] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.545617] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.545969] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.546159] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.548256] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.555894] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.564278] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.575072] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.579256] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.585292] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.591708] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.602621] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.603018] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.610737] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.619491] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.737426] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.738322] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.738526] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.738732] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.738988] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.739262] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.739684] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.740098] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.756683] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.756939] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.758915] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.760107] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.762519] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.764024] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.764976] pci 0005:00:00.0: Removing from iommu group 7 [ 5.765349] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.800966] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.826484] host1x 13e10000.host1x: initialized [ 5.828376] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.829451] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.830794] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.831573] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.832595] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.833346] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.834514] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.835066] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.836110] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.837349] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.847663] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.854400] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.864361] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.871614] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.881829] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.888663] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.898290] falcon 15340000.vic: Adding to iommu group 17 [ 5.913124] falcon 15340000.vic: initialized [ 5.914267] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.919956] falcon 15380000.nvjpg: initialized [ 5.920590] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.931312] falcon 154c0000.nvenc: initialized [ 5.931910] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.941479] falcon 15a80000.nvenc1: initialized [ 5.942106] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.954617] nvdec 15480000.nvdec: initialized [ 5.955217] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.964734] nvdec 15140000.nvdec1: initialized [ 5.965460] tsec 15500000.tsec: Adding to iommu group 18 [ 5.970576] tsec 15500000.tsec: initialized [ 5.971108] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.978909] tsec 15100000.tsecb: initialized [ 5.982728] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.010930] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.025123] gpio-374 (wifi-enable): hogged as output/high [ 6.025477] gpio-431 (camera-control-output-low): hogged as output/low [ 6.025847] gpio-432 (camera-control-output-low): hogged as output/low [ 6.027567] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.029558] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.030164] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.031549] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.035093] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.040981] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.046781] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.054850] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.062174] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.073596] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.078727] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.084722] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.093606] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.102671] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.110233] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.117745] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.123642] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.133598] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.139528] pva 16000000.pva0: Adding to iommu group 22 [ 6.166585] pva 16000000.pva0: initialized [ 6.171721] pva 16800000.pva1: Adding to iommu group 23 [ 6.190444] pva 16800000.pva1: initialized [ 6.195189] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.209127] nvdla 15880000.nvdla0: initialized [ 6.210545] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.219002] nvdla 158c0000.nvdla1: initialized [ 6.222244] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=62 [ 6.222638] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.222652] tegradc 15200000.display: Adding to iommu group 26 [ 6.223270] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.224649] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.225946] tegradc 15210000.display: Adding to iommu group 26 [ 6.227112] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.227304] tegra_cec 3960000.tegra_cec: probed [ 6.227339] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.228106] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.232094] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.240085] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.245122] tegradccommon 15200000.display-hub: dma mapping done [ 6.252166] kfuse 3830000.kfuse: initialized [ 6.262885] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.268864] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.275768] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.282084] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.291254] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.296631] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.305499] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.311442] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.330992] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.331381] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.334730] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.342673] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.351538] tegra-xusb 3610000.xhci: irq 187, io mem 0x03610000 [ 6.358045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.365461] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.372619] usb usb1: Product: xHCI Host Controller [ 6.377854] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.384149] usb usb1: SerialNumber: 3610000.xhci [ 6.390112] hub 1-0:1.0: USB hub found [ 6.392686] hub 1-0:1.0: 4 ports detected [ 6.397710] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.401869] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.409767] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.417341] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.425056] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.432284] usb usb2: Product: xHCI Host Controller [ 6.437528] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.443738] usb usb2: SerialNumber: 3610000.xhci [ 6.449412] hub 2-0:1.0: USB hub found [ 6.451934] hub 2-0:1.0: 4 ports detected [ 6.494627] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.500879] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.502297] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.502569] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.517357] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1902000 KHz, changing to: 1907200 KHz [ 6.518476] tegra194-cpufreq ccplex: probed with BWMGR [ 6.519528] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.520061] irq: IRQ261: trimming hierarchy from :pmc@c360000 [ 6.522049] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.528359] tegra194-vi5 15c10000.vi: initialized [ 6.529431] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.529703] generic_infoframe_type: 0x87 [ 6.529891] tegradc 15200000.display: DT parsed successfully [ 6.530999] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.533744] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.535427] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.536396] mmc0: CQHCI version 5.10 [ 6.540475] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.548041] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.548057] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.556565] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.560183] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.563796] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.567821] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.576213] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.584345] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.592485] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.597026] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.597045] nvethernet 2490000.ethernet: Failed to read DMA Tx ring size, using default [1024] [ 6.604551] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.607098] tegradc 15200000.display: probed [ 6.611217] nvethernet 2490000.ethernet: Failed to read DMA Tx ring size, using default [1024] [ 6.644792] mmc0: Command Queue Engine enabled [ 6.657249] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.658454] mmc0: periodic cache flush enabled [ 6.661206] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.666864] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.666871] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.702858] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.703186] Console: switching to colour frame buffer device 80x30 [ 6.703442] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:76:3c:e1 [ 6.703484] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.703629] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.707411] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 [ 6.709309] tegradc 15200000.display: fb registered [ 6.709392] irq: IRQ262: trimming hierarchy from :pmc@c360000 [ 6.755397] nvethernet 2490000.ethernet: Macsec not supported [ 6.755913] tegradc 15210000.display: disp1 connected to head1->sor [ 6.767392] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.774538] tegradc 15210000.display: DT parsed successfully [ 6.780305] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.788466] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.788568] tegradc 15210000.display: vblank syncpt # 11 for dc 1 [ 6.797141] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.802466] tegradc 15210000.display: vpulse3 syncpt # 12 for dc 1 [ 6.808021] irq: IRQ265: trimming hierarchy from :interrupt-controller@3881000 [ 6.821678] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.829220] tegradc 15210000.display: probed [ 6.829672] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.839189] tegradc 15210000.display: fb registered [ 6.840794] tegra-se-nvhost 15810000.se: initialized [ 6.844997] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.847884] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.847892] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.847899] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.854026] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.857247] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.857252] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.857263] usb 1-2: Manufacturer: Generic [ 6.864902] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.873922] hub 1-2:1.0: USB hub found [ 6.878113] tegra-se-nvhost 15820000.se: initialized [ 6.884757] hub 1-2:1.0: 4 ports detected [ 6.892865] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.924849] tegradc 15210000.display: blank - powerdown [ 6.925355] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.930067] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.930071] Extcon DP: HPD disabled [ 6.930075] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.930113] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.936914] tegra-se-nvhost 15830000.se: initialized [ 6.944836] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.962064] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.967182] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.986532] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.993147] tegra-se-nvhost 15840000.se: initialized [ 6.998918] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.005119] tegra_actmon d230000.actmon: in actmon_register()... [ 7.007411] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.009499] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.017571] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.023672] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.030149] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.030175] usb 2-3: Manufacturer: Generic [ 7.040993] hub 2-3:1.0: USB hub found [ 7.043781] hvc_sysfs: hypervisor is not present [ 7.049262] hub 2-3:1.0: 4 ports detected [ 7.079154] ALSA device list: [ 7.079252] No soundcards found. [ 7.080380] Freeing unused kernel memory: 3968K [ 7.080652] Run /init as init process [ 7.125303] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.139722] Root device found: PARTUUID=311343f0-ad87-41ef-8d22-84597bf8f501 ��WARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ��[ 7.233216] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.233412] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.274479] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.274680] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.274853] usb 1-3: Product: Bluetooth Radio [ 7.274950] usb 1-3: Manufacturer: Realtek [ 7.275042] usb 1-3: SerialNumber: 00e04c000001 [ 7.608130] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.618710] Rootfs mounted over PARTUUID=311343f0-ad87-41ef-8d22-84597bf8f501 [ 7.653681] Switching from initrd to actual rootfs [ 7.671982] random: crng init done [ 7.796951] systemd[1]: System time before build time, advancing clock. [ 8.216537] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFU) [ 8.219009] systemd[1]: Detected architecture arm64. [ 8.256044] systemd[1]: Set hostname to . [ 9.047608] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 9.048114] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 9.052671] systemd[1]: Created slice system-modprobe.slice. [ 9.054622] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 9.056050] systemd[1]: Created slice User and Session Slice. [ 9.056779] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.058559] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.059263] systemd[1]: Reached target User and Group Name Lookups. [ 9.059639] systemd[1]: Reached target Slices. [ 9.060023] systemd[1]: Reached target Swap. [ 9.061366] systemd[1]: Listening on RPCbind Server Activation Socket. [ 9.062253] systemd[1]: Listening on Syslog Socket. [ 9.063110] systemd[1]: Listening on fsck to fsckd communication Socket. [ 9.063744] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 9.065289] systemd[1]: Listening on Journal Audit Socket. [ 9.066172] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.067134] systemd[1]: Listening on Journal Socket. [ 9.069583] systemd[1]: Listening on udev Control Socket. [ 9.074689] systemd[1]: Listening on udev Kernel Socket. [ 9.084839] systemd[1]: Mounting Huge Pages File System... [ 9.090713] systemd[1]: Mounting POSIX Message Queue File System... [ 9.096764] systemd[1]: Mounting RPC Pipe File System... [ 9.102781] systemd[1]: Mounting Kernel Debug File System... [ 9.108742] systemd[1]: Mounting Kernel Trace File System... [ 9.117316] systemd[1]: Starting Journal Service... [ 9.123695] systemd[1]: Starting Set the console keyboard layout... [ 9.129831] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 9.135188] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 9.135847] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 9.147952] systemd[1]: Starting Load Kernel Module efi_pstore... [ 9.154269] systemd[1]: Starting Load Kernel Module pstore_blk... [ 9.162122] systemd[1]: Starting Load Kernel Module pstore_zone... [ 9.167718] systemd[1]: Starting Load Kernel Module ramoops... [ 9.172853] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 9.179518] systemd[1]: Started Nameserver information manager. [ 9.180968] systemd[1]: Reached target Network (Pre). [ 9.187297] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 9.202507] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 9.240749] systemd[1]: Starting Load Kernel Modules... [ 9.246420] systemd[1]: Starting Remount Root and Kernel File Systems... [ 9.251491] systemd[1]: Starting udev Coldplug all Devices... [ 9.260927] systemd[1]: Mounted Huge Pages File System. [ 9.262161] systemd[1]: Mounted POSIX Message Queue File System. [ 9.263176] systemd[1]: Mounted RPC Pipe File System. [ 9.264091] systemd[1]: Mounted Kernel Debug File System. [ 9.274710] systemd[1]: Mounted Kernel Trace File System. [ 9.288037] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 9.313932] systemd[1]: modprobe@chromeos_pstore.service: Succeeded. [ 9.323481] systemd[1]: Finished Load Kernel Module chromeos_pstore. [ 9.333974] systemd[1]: modprobe@efi_pstore.service: Succeeded. [ 9.336495] systemd[1]: Finished Load Kernel Module efi_pstore. [ 9.338757] systemd[1]: modprobe@pstore_blk.service: Succeeded. [ 9.341011] systemd[1]: Finished Load Kernel Module pstore_blk. [ 9.341335] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 9.345808] systemd[1]: modprobe@pstore_zone.service: Succeeded. [ 9.354830] systemd[1]: Finished Load Kernel Module pstore_zone. [ 9.372485] systemd[1]: modprobe@ramoops.service: Succeeded. [ 9.375700] systemd[1]: Finished Load Kernel Module ramoops. [ 9.377225] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 9.378774] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 9.379044] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 9.379281] nvmap_page_pool_init: Total RAM pages: 3816748 [ 9.379469] nvmap_page_pool_init: nvmap page pool size: 477093 pages (1863 MB) [ 9.380110] nvmap_background_zero_thread: PP zeroing thread starting. [ 9.380805] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 9.381247] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 9.381463] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 9.383102] systemd[1]: Finished Remount Root and Kernel File Systems. [ 9.406156] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 9.406663] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 9.417578] systemd[1]: Starting Load/Save Random Seed... [ 9.424693] systemd[1]: Starting Create System Users... [ 9.497886] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 9.497886] [ 9.522530] systemd[1]: Finished Set the console keyboard layout. [ 9.525510] systemd[1]: nvfb-udev.service: Succeeded. [ 9.529018] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 9.546951] systemd[1]: Finished Load/Save Random Seed. [ 9.566022] systemd[1]: Finished Load Kernel Modules. [ 9.567752] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 9.573496] systemd[1]: Mounting Kernel Configuration File System... [ 9.579821] systemd[1]: Started OP-TEE Client Supplicant. [ 9.585139] systemd[1]: Starting Apply Kernel Variables... [ 9.590499] systemd[1]: Mounted Kernel Configuration File System. [ 9.627440] systemd[1]: Finished Create System Users. [ 9.635118] systemd[1]: Starting Create Static Device Nodes in /dev... [ 11.220870] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 11.230711] imx219 9-0010: board setup failed [ 11.230945] imx219: probe of 9-0010 failed with error -121 [ 11.242211] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 11.247639] imx219 10-0010: board setup failed [ 11.247860] imx219: probe of 10-0010 failed with error -121 [ 12.255609] using random self ethernet address [ 12.255943] using random host ethernet address [ 14.054894] using random self ethernet address [ 14.056173] using random host ethernet address [ 34.960577] IRQ266: set affinity failed(-22). [ 34.961338] CPU4: shutdown [ 35.018471] IRQ266: set affinity failed(-22). [ 35.019743] CPU5: shutdown [ 37.638140] nvidia: loading out-of-tree module taints kernel. Ubuntu 20.04.5 LTS Jetson ttyTCU0 Jetson login: nvidia (automatic login) Welcome to Ubuntu 20.04.5 LTS (GNU/Linux 5.10.104-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 12 updates can be applied immediately. 8 of these updates are standard security updates. To see these additional updates run: apt list --upgradable The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. To run a command as administrator (user "root"), use "sudo ". See "man sudo_root" for details. nvidia@Jetson:~$ sudo nvbootctrl -t rootfs dump-slots-info [sudo] password for nvidia: Current rootfs slot: B Active rootfs slot: B num_slots: 2 slot: 0, retry_count: 0, status: unbootable slot: 1, retry_count: 3, status: normal nvidia@Jetson:~$