�� [0000.024] W> RATCHET: MB1 binary ratchet value 4 is too large than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 1.5.1.9-t194-41334769-73a9b7ef) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Chip revision : A02P [0000.044] I> Bootrom patch version : 15 (correctly patched) [0000.049] I> ATE fuse revision : 0x200 [0000.053] I> Ram repair fuse : 0x0 [0000.056] I> Ram Code : 0x0 [0000.059] I> rst_source : 0x0 [0000.061] I> rst_level : 0x0 [0000.065] I> Boot-device: QSPI [0000.067] I> Qspi flash params source = brbct [0000.072] I> Qspi using bpmp-dma [0000.075] I> Qspi clock source : pllp [0000.078] I> QSPI Flash Size = 32 MB [0000.081] I> Qspi initialized successfully [0000.085] I> Active Boot chain : 0 [0000.089] I> Boot-device: QSPI [0000.091] I> Qspi flash params source = brbct [0000.097] W> MB1_PLATFORM_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 38500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.112] W> Skipping boost for clk: BPMP_APB [0000.116] W> Skipping boost for clk: AXI_CBB [0000.120] W> Skipping boost for clk: AON_CPU_NIC [0000.124] W> Skipping boost for clk: CAN1 [0000.128] W> Skipping boost for clk: CAN2 [0000.132] I> Boot-device: QSPI [0000.135] I> Boot-device: QSPI [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi using bpmp-dma [0000.145] I> Qspi clock source : pllc_out0 [0000.149] I> Qspi reinitialized [0000.152] I> Qspi flash params source = mb1bct [0000.157] I> ECC region[0]: Start:0x0, End:0x0 [0000.161] I> ECC region[1]: Start:0x0, End:0x0 [0000.166] I> ECC region[2]: Start:0x0, End:0x0 [0000.170] I> ECC region[3]: Start:0x0, End:0x0 [0000.174] I> ECC region[4]: Start:0x0, End:0x0 [0000.178] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.184] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.188] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.193] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.197] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.202] E> FAILED: Thermal config [0000.210] E> FAILED: MEMIO rail config [0000.220] I> Boot-device: QSPI [0000.223] I> Qspi flash params source = mb1bct [0000.232] I> Qspi flash params source = mb1bct [0000.243] I> Qspi flash params source = mb1bct [0000.310] I> Qspi flash params source = mb1bct [0000.319] I> Qspi flash params source = mb1bct [0000.350] I> Qspi flash params source = mb1bct [0000.362] I> MB1 done ����main enter SPE VERSION #: R01.00.14 Created: Sep 19 2018 @ 11:03:21 HW Function test Start Scheduler. in late init �� [0000.370] I> Welcome to MB2(TBoot-BPMP) (version: 00.00.2018.32-mobile-6fc80c72) [0000.371] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.371] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.372] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.378] W> device prod register failed [0000.381] I> gpio framework initialized [0000.385] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.392] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.400] I> sdcard_params [0, 55, 0, 50] in mb1_bct [0000.405] I> Boot-device: QSPI [0000.408] I> Boot_device: QSPI_FLASH instance: 0 [0000.413] I> QSPI Flash Size = 32 MB [0000.419] I> Qspi initialized successfully [0000.420] I> qspi flash-0 params source = boot args [0000.424] I> Found sdcard [0000.554] I> sdmmc SDR mode [0000.569] I> sdcard-0 params source = mb1 bct [0000.572] I> Found 47 partitions in QSPI_FLASH (instance 0) [0000.584] I> Found 19 partitions in SDCARD (instance 0) [0000.585] I> Active Boot chain : 0 [0000.586] I> parsing oem signed section of bpmp-fw header done [0000.587] I> bpmp-fw binary init read from storage [0000.588] I> oem authentication of bpmp-fw header done [0000.600] I> bpmp-fw binary done read from storage [0000.601] I> bpmp-fw: Authentication init Done [0000.602] I> parsing oem signed section of cpubl header done [0000.603] I> cpubl binary init read from storage [0000.603] I> bpmp-fw: Authentication Finalize Done [0000.607] I> oem authentication of cpubl header done [0000.615] I> cpubl binary done read from storage [0000.616] I> cpubl: Authentication init Done [0000.620] I> parsing oem signed section of rce header done [0000.625] I> rce binary init read from storage [0000.630] I> Relocating BR-BCT [0000.633] I> cpubl: Authentication Finalize Done [0000.637] I> oem authentication of rce header done [0000.642] I> rce binary done read from storage [0000.646] I> rce: Authentication init Done [0000.650] I> parsing oem signed section of ape header done [0000.655] I> ape binary init read from storage [0000.659] I> rce: Authentication Finalize Done [0000.664] I> oem authentication of ape header done [0000.668] I> ape binary done read from storage [0000.673] I> ape: Authentication init Done [0000.677] I> parsing oem signed section of tos header done [0000.682] I> tos binary init read from storage [0000.686] I> ape: Authentication Finalize Done [0000.691] I> oem authentication of tos header done [0000.697] I> tos binary done read from storage [0000.699] I> tos: Authentication init Done [0000.704] I> parsing oem signed section of bpmp-fw-dtb header done [0000.709] I> bpmp-fw-dtb binary init read from storage [0000.714] I> tos: Authentication Finalize Done [0000.720] I> oem authentication of bpmp-fw-dtb header done [0000.726] I> bpmp-fw-dtb binary done read from storage [0000.729] I> bpmp-fw-dtb: Authentication init Done [0000.734] I> parsing oem signed section of cpubl-dtb header done [0000.740] I> cpubl-dtb binary init read from storage [0000.744] I> bpmp-fw-dtb: Authentication Finalize Done [0000.829] I> oem authentication of cpubl-dtb header done [0000.830] I> cpubl-dtb binary done read from storage [0000.830] I> cpubl-dtb: Authentication init Done [0000.831] I> parsing oem signed section of eks header done [0000.832] I> eks binary init read from storage [0000.832] I> cpubl-dtb: Authentication Finalize Done [0000.833] I> oem authentication of eks header done [0000.838] I> eks binary done read from storage [0000.842] I> eks: Authentication init Done [0000.846] I> eks: Authentication Finalize Done [0000.850] I> EKB detected (length: 0x410) @ VA:0x52700400 ��NOTICE: BL31: v1.3(release):b5eeb33f7 NOTICE: BL31: Built : 08:55:29, Feb 19 2022 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 41: hwkey-agent is running!! hwkey-agent: 347: key_mgnt_processing ....... hwkey-agent: 255: Setting EKB key 0 to slot 14 hwkey-agent: 178: Init hweky-agent services!! luks-srv: 40: luks-srv is running!! luks-srv: 157: Init luks-srv IPC services!! platform_bootstrap_epilog: trusty bootstrap complete �� welcome to lk calling constructors initializing heap creating bootstrap completion thread top of bootstrap2() initializing platform bpmp: platform_init tag is e73a758761f0c6d24a1e69a2ac6b5035 tag_show initialized dt initialized mail initialized chipid initialized fuse initialized sku initialized speedo initialized ec_get_ec_list: found 45 ecs ec initialized ec_mrq initialized vmon_populate_monitors: found 3 monitors vmon initialized adc initialized fmon_populate_monitors: found 73 monitors fmon initialized fmon_mrq initialized reset initialized nvhs initialized 391 clocks registered clk_mrq_init: mrq handler registered clk initialized nvlink initialized io_dpd initialized io_dpd initialized thermal initialized i2c5 controller initialized initialized i2c mrq handling i2c initialized regulator initialized avfs_clk_platform_init: bad clk id in clock@cluster1_avfs avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized pg_late initialized strap initialized tag initialized emc initialized clk_dt initialized avfs_ccplex_platform initialized tj_max: dt node not found tj_init initialized uphy_mrq_init: mrq handler registered uphy_dt initialized uphy initialized safereg_init: period 80 ms ec_late initialized �� [0001.210] I> Welcome to Cboot��mrq initialized WARNING: no registered clock for FMON_NAFLL_CLUSTER1 (id 281) fmon_post initialized �� [0001.211] I> Cboot Version: t194-63226c45 [0001.213] I> CPU-BL Params @ 0xf2820000 [0001.216] I> 0) Base:0x00000000 Size:0x00000000 [0001.221] I> 1) Base:0xf1100000 Size:0x00100000 ��clk_set_parent failed for clk i2c2, parent pll_aon (-22) clk_set_parent failed for clk i2c8, parent pll_aon (-22) clk_dt_late initialized machine_check initialized pm_post initialized dbells initialized avfs_clk_platform_post initialized dmce initialized cvc initialized ccplex_avfs_hw_init: nafll_cluster0: not monitored ccplex_avfs_hw_init: nafll_cluster2: not monitored ccplex_avfs_hw_init: nafll_cluster3: not monitored avfs_clk_mach_post initialized regulator_post initialized rm initialized sc7_diag initialized thermal_test initialized serial_late initialized clk_post initialized clk_dt_post initialized mc_reg initialized pg_post initialized dyn_modules initialized sku_debugfs initialized speedo_debugfs initialized adc_debugfs initialized Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 Failed to register PTO counter for id 281 clk_debugfs initialized emc_debugfs initialized dvs_debugfs initialized fmon_debugfs_init_one: no clock debugfs node to attach FMON_NAFLL_CLUSTER1 fmon_debugfs initialized vmon_debugfs initialized pg_debugfs initialized profile_fs initialized debugfs_cons initialized mail_fs initialized profile initialized cvc_debugfs initialized dmce_debugfs initialized ec_debugfs initialized rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_debugfs initialized soctherm_debug initialized gr_reader initialized mods initialized dt_fs initialized debugfs_mrq initialized debug_mrq initialized debug_safereg initialized initializing target calling apps_init() starting app shell entering main console loop ] ��[0001.225] I> 2) Base:0xf2000000 Size:0x00200000 [0001.380] I> 3) Base:0xf1200000 Size:0x00200000 [0001.384] I> 4) Base:0xf1000000 Size:0x00100000 [0001.388] I> 5) Base:0xf0f00000 Size:0x00100000 [0001.393] I> 6) Base:0xf3800000 Size:0x00400000 [0001.397] I> 7) Base:0xf1c00000 Size:0x00400000 [0001.402] I> 8) Base:0xf0e00000 Size:0x00100000 [0001.406] I> 9) Base:0xf0d00000 Size:0x00100000 [0001.411] I> 10) Base:0xf3000000 Size:0x00800000 [0001.415] I> 11) Base:0x40000000 Size:0x00040000 [0001.420] I> 12) Base:0xf0c00000 Size:0x00100000 [0001.424] I> 13) Base:0x40046000 Size:0x00002000 [0001.429] I> 14) Base:0x40048000 Size:0x00002000 [0001.433] I> 15) Base:0xac000000 Size:0x00004000 [0001.438] I> 16) Base:0x4004a000 Size:0x00002000 [0001.442] I> 17) Base:0xf0b00000 Size:0x00100000 [0001.446] I> 18) Base:0x4004c000 Size:0x00002000 [0001.451] I> 19) Base:0xf2200000 Size:0x00600000 [0001.455] I> 20) Base:0x4004e000 Size:0x00002000 [0001.460] I> 21) Base:0xf0ad0000 Size:0x0000c000 [0001.464] I> 22) Base:0x00000000 Size:0x00000000 [0001.469] I> 23) Base:0xf0ae0000 Size:0x00020000 [0001.473] I> 24) Base:0xf6000000 Size:0x02000000 [0001.478] I> 25) Base:0x40050000 Size:0x00002000 [0001.482] I> 26) Base:0x40040000 Size:0x00006000 [0001.487] I> 27) Base:0xf1800000 Size:0x00400000 [0001.491] I> 28) Base:0xf4c00000 Size:0x01400000 [0001.496] I> 29) Base:0xf1400000 Size:0x00400000 [0001.500] I> 30) Base:0x00000000 Size:0x00000000 [0001.504] I> 31) Base:0x00000000 Size:0x00000000 [0001.509] I> 32) Base:0xf8000000 Size:0x08000000 [0001.513] I> 33) Base:0x00000000 Size:0x00000000 [0001.518] I> 34) Base:0xf3c00000 Size:0x01000000 [0001.522] I> 35) Base:0xab000000 Size:0x01000000 [0001.527] I> 36) Base:0xa0000000 Size:0x0b000000 [0001.531] I> 37) Base:0xf2800000 Size:0x00800000 [0001.536] I> 38) Base:0x80000000 Size:0x20000000 [0001.540] I> 39) Base:0xb0000000 Size:0x08000000 [0001.545] I> 40) Base:0x00000000 Size:0x00000000 [0001.549] I> 41) Base:0x00000000 Size:0x00000000 [0001.554] I> 42) Base:0x00000000 Size:0x00000000 [0001.558] I> 43) Base:0x00000000 Size:0x00000000 [0001.562] I> 44) Base:0x00000000 Size:0x00000000 [0001.567] I> 45) Base:0x00000000 Size:0x00000000 [0001.571] GIC-SPI Target CPU: 0 [0001.574] Interrupts Init done [0001.577] calling constructors [0001.580] initializing heap [0001.583] I> Heap: [0xa0699b80 ... 0xab000000] [0001.587] initializing threads [0001.590] initializing timers [0001.593] creating bootstrap completion thread [0001.597] top of bootstrap2() [0001.600] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0001.604] initializing platform [0001.607] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0001.613] W> device prod register failed [0001.617] I> Bl_dtb @0xaaf00000 [0001.622] W> "plugin-manager" doesn't exist, creating [0001.625] W> "ids" doesn't exist, creating [0001.629] W> "connection" doesn't exist, creating [0001.633] W> "configs" doesn't exist, creating [0001.645] E> failed to read label property for node 158736: 13 [0001.647] E> failed to read reg property for node 158800: 13 [0001.650] E> failed to read reg property for node 158852: 13 [0001.655] E> failed to read reg property for node 158936: 13 [0001.661] I> Find /i2c@3160000's alias i2c0 [0001.664] I> Reading eeprom i2c=0 address=0x50 [0001.693] I> Device at /i2c@3160000:0x50 [0001.693] I> Reading eeprom i2c=0 address=0x57 [0001.718] I> Device at /i2c@3160000:0x57 [0001.720] I> Find /i2c@c240000's alias i2c1 [0001.720] I> Reading eeprom i2c=1 address=0x50 [0001.722] E> I2C: slave not found in slaves. [0001.722] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.723] E> I2C_DEV: Failed to send register address 0x00000000. [0001.723] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.732] E> eeprom: Retry to read I2C slave device. [0001.737] E> I2C: slave not found in slaves. [0001.741] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0001.749] E> I2C_DEV: Failed to send register address 0x00000000. [0001.754] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 1. [0001.764] E> eeprom: Failed to read I2C slave device [0001.769] I> Eeprom read failed 0x3526070d [0001.773] I> create_pm_ids: id: 3668-0000-200-H, len: 15 [0001.778] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.789] I> create_pm_ids: id: 3509-0000-100-G, len: 15 [0001.794] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0001.805] I> Adding plugin-manager/ids/3668-0000-200=/i2c@3160000:module@0x50 [0001.812] W> "i2c@3160000" doesn't exist, creating [0001.817] W> "module@0x50" doesn't exist, creating [0001.821] I> Adding plugin-manager/ids/3509-0000-100=/i2c@3160000:module@0x57 [0001.828] W> "module@0x57" doesn't exist, creating [0001.834] I> Adding plugin-manager/cvm [0001.837] W> "chip-id" doesn't exist, creating [0001.841] I> Adding plugin-manager/chip-id/A02P [0001.845] I> Plugin-manager override starting [0001.850] I> node /plugin-manager/fragment-pcie-c5-rp matches [0001.858] I> node /plugin-manager/fragement-tegra-wdt-en matches [0001.864] I> node /plugin-manager/fragement-tegra-sdhci-emmc-dis matches [0001.872] I> Disable plugin-manager status in FDT [0001.872] I> Plugin-manager override finished successfully [0001.877] I> gpio framework initialized [0001.882] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0001.889] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0001.896] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x46 [0001.903] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.911] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.918] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.924] I> tegrabl_tca9539_init: i2c bus: 1, slave addr: 0x44 [0001.931] W> fetch_driver_phandle_from_dt: failed to get node with compatible ti,tca9539 [0001.939] W> fetch_driver_phandle_from_dt: failed to get node with compatible nxp,tca9539 [0001.946] W> tegrabl_tca9539_init: failed to fetch phandle from dt [0001.953] I> fixed regulator driver initialized [0001.960] I> register 'maxim' power off handle [0001.961] I> virtual i2c enabled [0001.963] I> registered 'maxim,max20024' pmic [0001.968] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0001.974] I> Boot-device: QSPI [0001.977] I> Boot_device: QSPI_FLASH instance: 0 [0001.982] I> QSPI source rate = 204000 Khz [0001.985] I> Requested rate for QSPI clock = 34000 Khz [0001.991] I> BPMP-set rate for QSPI clk = 34000 Khz [0001.995] I> QSPI Flash Size = 32 MB [0002.003] I> Qspi initialized successfully [0002.003] I> qspi flash-0 params source = boot args [0002.007] I> create_pm_ids: id: 3668-0000-200-H, len: 15 [0002.012] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.023] I> create_pm_ids: id: 3509-0000-100-G, len: 15 [0002.029] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.040] I> Found sdcard [0002.044] I> enabling 'vdd-sdmmc1-sw' regulator [0002.050] I> regulator 'vdd-sdmmc1-sw' already enabled [0002.078] I> sdmmc SDR mode [0002.092] I> sdcard-0 params source = DT-BL [0002.094] I> Found 47 partitions in QSPI_FLASH (instance 0) [0002.102] I> Found 19 partitions in SDCARD (instance 0) [0002.110] I> regulator 'vdd-hdmi-5v0' already enabled [0002.114] I> regulator 'vdd-hdmi-5v0' already enabled [0002.114] I> hdmi cable connected [0002.116] W> set volts not configured for 'vdd-1v0' [0002.117] W> set volts not configured for 'vdd-1v8-hs' [0002.117] I> retrieved tmds range from prod_list_hdmi_soc [0002.121] E> invalid display type [0002.122] E> cannot find any other nvdisp nodes [0002.137] I> edid read success [0002.149] I> edid read success [0002.150] I> width = 640, height = 480, frequency = 25174825 [0002.150] I> width = 640, height = 480, frequency = 25174825 [0002.151] I> width = 1920, height = 1080, frequency = 148500000 [0002.151] I> width = 1920, height = 1080, frequency = 148500000 [0002.151] I> width = 1920, height = 1080, frequency = 148351648 [0002.156] I> width = 1280, height = 720, frequency = 74175824 [0002.161] I> width = 720, height = 480, frequency = 26973026 [0002.167] I> width = 720, height = 480, frequency = 26973026 [0002.172] I> width = 640, height = 480, frequency = 25174825 [0002.178] I> width = 1920, height = 1080, frequency = 148351648 [0002.184] I> width = 720, height = 576, frequency = 26973026 [0002.189] I> width = 1280, height = 720, frequency = 74175824 [0002.195] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0002.205] I> hdmi_enable, starting HDMI initialisation [0002.210] I> hdmi_enable, HDMI initialisation complete [0002.220] I> Load in CBoot Boot Options partition and parse it [0002.220] E> Error -9 when finding node with path /boot-configuration [0002.223] E> tegrabl_cbo_parse_info: "boot-configuration" not found in CBO file. [0002.230] I> Using default boot order [0002.234] I> boot-dev-order :- [0002.237] I> 1.sd [0002.238] I> 2.usb [0002.240] I> 3.nvme [0002.242] I> 4.emmc [0002.244] I> 5.net [0002.246] I> Hit any key to stop autoboot: 4 3 2 1 [0004.254] initializing target [0004.254] calling apps_init() [0004.255] starting app kernel_boot_app [0004.261] I> found decompressor handler: lz4-legacy [0004.261] I> decompressing BMP blob ... [0004.265] I> Kernel type = Normal [0004.265] I> ########## SD (0) boot ########## [0004.266] I> Found sdcard [0004.268] I> regulator 'vdd-sdmmc1-sw' already enabled [0004.272] I> regulator 'vdd-sdmmc1-sw' already enabled [0004.299] I> sdmmc SDR mode [0004.313] I> sdcard-0 params source = DT-BL [0004.313] I> Already published: 00060000 [0004.314] I> Look for boot partition [0004.314] I> Fallback: assuming 0th partition is boot partition [0004.314] I> Detect filesystem [0004.335] I> Loading kernel-bootctrl from partition [0004.335] E> Cannot find partition kernel-bootctrl [0004.336] E> Cannot open partition kernel-bootctrl [0004.336] W> tegrabl_get_kernel_bootctrl: failed to read primary bootctrl data [0004.337] I> Loading kernel-bootctrl_b from partition [0004.337] E> Cannot find partition kernel-bootctrl_b [0004.341] E> Cannot open partition kernel-bootctrl_b [0004.345] W> tegrabl_get_kernel_bootctrl: failed to read recovery bootctrl data [0004.353] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0004.360] I> Loading extlinux.conf ... [0004.363] I> Loading extlinux.conf binary from rootfs ... [0004.368] I> rootfs path: /sd/boot/extlinux/extlinux.conf [0004.382] I> ext4_open_file:666: '/boot/extlinux/extlinux.conf' lookup failed [0004.382] E> file /sd/boot/extlinux/extlinux.conf open failed!! [0004.386] W> Failed to load extlinux.conf binary from rootfs (err=202113041) [0004.393] E> Failed to find/load /boot/extlinux/extlinux.conf [0004.399] I> Loading kernel ... [0004.402] I> No kernel binary path [0004.405] I> Continue to load from partition ... [0004.410] I> A/B: bin_type (37) slot 0 [0004.413] I> Loading kernel from partition [0004.417] I> Loading partition kernel at 0xa4ad0000 from device(0x6) [0009.866] I> Validate kernel ... [0009.866] I> T19x: Authenticate kernel (bin_type: 37), max size 0x5000000 [0010.249] I> Encryption fuse is not ON [0010.281] I> Checking boot.img header magic ... [0010.281] I> [OK] [0010.282] I> Loading kernel-dtb ... [0010.282] I> No kernel-dtb binary path [0010.282] I> Continue to load from partition ... [0010.282] I> A/B: bin_type (38) slot 0 [0010.283] I> Loading kernel-dtb from partition [0010.283] I> Loading partition kernel-dtb at 0x91000000 from device(0x6) [0010.330] I> Validate kernel-dtb ... [0010.330] I> T19x: Authenticate kernel-dtb (bin_type: 38), max size 0x400000 [0010.333] I> Encryption fuse is not ON [0010.334] I> Kernel hdr @0xa4ad0000 [0010.335] I> Kernel dtb @0x90000000 [0010.335] I> decompressor handler not found [0010.335] I> Copying kernel image (33700352 bytes) from 0xa4ad0800 to 0x80080000 ... [0010.345] I> Done [0010.345] I> Move ramdisk (len: 8393747) from 0xa6af4800 to 0x92000000 [0010.349] I> Updated bpmp info to DTB [0010.350] I> Ramdisk: Base: 0x92000000; Size: 0x801413 [0010.354] I> Updated initrd info to DTB [0010.358] W> WARN: Fail to override "console=none" in commandline [0010.364] I> Active rootfs suffix: [0010.367] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0010.374] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display params [0010.381] I> Active slot suffix: [0010.384] I> add_boot_slot_suffix: slot_suffix = [0010.389] I> Linux Cmdline: console=ttyTCU0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06aa000 lut_mem=0x2008@0xa06a5000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [0010.428] I> Updated bootarg info to DTB [0010.432] W> MAC addr invalid! [0010.435] E> Failed to get WIFI MAC address [0010.439] W> MAC addr invalid! [0010.442] E> Failed to get Bluetooth MAC address [0010.446] I> eeprom_get_mac_addr: MAC (type: 2): 48:b0:2d:07:7b:69 [0010.453] W> "plugin-manager" doesn't exist, creating [0010.458] I> Adding /chosen/plugin-manager/cvm [0010.462] W> "chip-id" doesn't exist, creating [0010.466] I> Adding /chosen/plugin-manager/chip-id [0010.471] W> "configs" doesn't exist, creating [0010.475] I> Adding /chosen/plugin-manager/configs [0010.480] W> "ids" doesn't exist, creating [0010.484] I> Adding /chosen/plugin-manager/ids [0010.488] W> "odm-data" doesn't exist, creating [0010.492] I> Adding /chosen/plugin-manager/odm-data [0010.500] W> "memory" doesn't exist, creating [0010.502] I> [0] START: 0x80000000, END: 0xac000000 [0010.506] I> [1] START: 0xac004000, END: 0xf0ad0000 [0010.510] I> [2] START: 0xf0adc000, END: 0xf0ae0000 [0010.515] I> dram_block larger than 80000000 [0010.519] I> [3] START: 0x100000000, END: 0x280000000 [0010.524] I> added [base:0x80000000, size:0x2c000000] to /memory [0010.530] I> added [base:0xac200000, size:0x44800000] to /memory [0010.536] I> added [base:0x100000000, size:0x180000000] to /memory [0010.543] I> Updated memory info to DTB [0010.546] E> add_disp_param: failed to get display params for du=1 [0010.552] W> "reset" doesn't exist, creating [0010.556] I> Adding ecid(00000001646dd5c42400000012030080) to DT [0010.562] I> NVG: Logical CPU: 0; MPIDR: 0x80000000 [0010.566] I> NVG: Logical CPU: 1; MPIDR: 0x80000001 [0010.571] I> NVG: Logical CPU: 2; MPIDR: 0x80000100 [0010.576] I> NVG: Logical CPU: 3; MPIDR: 0x80000101 [0010.581] I> NVG: Logical CPU: 4; MPIDR: 0x80000200 [0010.585] I> NVG: Logical CPU: 5; MPIDR: 0x80000201 [0010.590] I> Deleted cpu@6 node in DT [0010.594] I> Deleted cpu@7 node in DT [0010.597] I> Deleted cluster3 node in FDT [0010.601] I> Update arm-pmu in FDT [0010.604] I> - update property: interrupts [0010.608] I> - update property: interrupt-affinity [0010.614] W> "misc-data" doesn't exist, creating [0010.617] I> Boot-device: QSPI [0010.620] W> Unknown boot device [0010.623] I> Add storage-qspi to plugin-manager/misc-data [0010.629] W> Unknown storage device [0010.632] I> Add serial number:1421920021566 as DT property [0010.638] I> Plugin-manager override starting [0010.642] I> node /plugin-manager/fragment-pcie-c5-rp matches [0010.647] I> node /plugin-manager/fragement-tegra-wdt-en matches [0010.656] I> node /plugin-manager/fragement-tegra-sdhci-emmc-dis matches [0010.660] I> Removing prop mmc0 from aliases [0010.663] E> Failed to delete prop mmc0 from /aliases [0010.668] E> Failed to overlay property [0010.673] E> Failed to update /aliases from /plugin-manager/fragement-tegra-sdhci-emmc-dis/override@1/_overlay_/ [0010.682] E> failed to override fragment: 2c434 [0010.686] E> Failed to handle /plugin-manager/fragement-tegra-sdhci-emmc-dis Error(1701117987) [0010.695] I> Disable plugin-manager status in FDT [0010.699] I> Plugin-manager override finished with Error [0010.705] I> tegrabl_load_kernel_and_dtb: Done [0010.727] I> Kernel EP: 0x80080000, DTB: 0x90000000 [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.65-tegra (buildbrain@mobile-u64-5414-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Mon May 16 20:58:07 PDT 2022 [ 0.000000] OF: fdt: memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: UEFI not found. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a06a4fff] [ 0.000000] node 0: [mem 0x00000000a06a5000-0x00000000a06a6fff] [ 0.000000] node 0: [mem 0x00000000a06a8000-0x00000000a06a9fff] [ 0.000000] node 0: [mem 0x00000000a06aa000-0x00000000a0ea9fff] [ 0.000000] node 0: [mem 0x00000000a0eaa000-0x00000000abffffff] [ 0.000000] node 0: [mem 0x00000000ac200000-0x00000000f07fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000ec800000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 31 pages/cpu s90008 r8192 d28776 u126976 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2001383 [ 0.000000] Kernel command line: console=ttyTCU0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06aa000 lut_mem=0x2008@0xa06a5000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000dc800000-0x00000000ec800000] (256MB) [ 0.000000] Memory: 7607348K/8132604K available (18496K kernel code, 3214K rwdata, 7092K rodata, 3968K init, 1070K bss, 459720K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x378/0x4f4 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001026] Console: colour dummy device 80x25 [ 0.002686] printk: console [tty0] enabled [ 0.002799] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002848] pid_max: default: 32768 minimum: 301 [ 0.003022] LSM: Security Framework initializing [ 0.003183] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003249] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.007450] rcu: Hierarchical SRCU implementation. [ 0.007876] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.008723] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0000-p3509-0000.dts [ 0.008771] DTB Build time: May 16 2022 21:09:42 [ 0.012061] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.012381] EFI services will not be available. [ 0.013005] smp: Bringing up secondary CPUs ... [ 0.017450] Detected PIPT I-cache on CPU1 [ 0.017549] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.020613] Detected PIPT I-cache on CPU2 [ 0.020769] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.022393] Detected PIPT I-cache on CPU3 [ 0.022490] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.024101] Detected PIPT I-cache on CPU4 [ 0.024294] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.025775] Detected PIPT I-cache on CPU5 [ 0.025921] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.026205] smp: Brought up 1 node, 6 CPUs [ 0.026472] SMP: Total of 6 processors activated. [ 0.026496] CPU features: detected: Privileged Access Never [ 0.026515] CPU features: detected: LSE atomic instructions [ 0.026531] CPU features: detected: User Access Override [ 0.026568] CPU features: detected: 32-bit EL0 Support [ 0.026584] CPU features: detected: RAS Extension Support [ 0.026600] CPU features: detected: CRC32 instructions [ 0.026637] CPU features: detected: 32-bit EL1 Support [ 0.127968] CPU: All CPU(s) started at EL2 [ 0.134266] devtmpfs: initialized [ 0.185621] Registered cp15_barrier emulation handler [ 0.185740] Registered setend emulation handler [ 0.185776] KASLR disabled due to lack of seed [ 0.186280] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.186341] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.188038] pinctrl core: initialized pinctrl subsystem [ 0.188344] OS set in device tree is not L4T. [ 0.188848] DMI not present or invalid. [ 0.189719] NET: Registered protocol family 16 [ 0.193171] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.193920] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.195012] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.195098] audit: initializing netlink subsys (disabled) [ 0.195455] audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1 [ 0.197183] printk: console [ramoops-1] enabled [ 0.197206] pstore: Registered ramoops as persistent store backend [ 0.197227] ramoops: using 0x200000@0xf0800000, ecc: 0 [ 0.197838] thermal_sys: Registered thermal governor 'step_wise' [ 0.197845] thermal_sys: Registered thermal governor 'power_allocator' [ 0.197867] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.200131] cpuidle: using governor menu [ 0.201188] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.201600] ASID allocator initialised with 65536 entries [ 0.201932] Serial: AMBA PL011 UART driver [ 0.205724] Tegra reboot handler registered. [ 0.205884] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0000-p3509-0000.dts [ 0.205926] DTB Build time: May 16 2022 21:09:42 [ 0.292374] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.292686] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.292874] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.293075] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.293296] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.296310] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c10000 [ 0.296362] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c20000 [ 0.296409] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c30000 [ 0.296453] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c40000 [ 0.296497] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c50000 [ 0.296543] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2b80000 [ 0.296626] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2b90000 [ 0.296668] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2ba0000 [ 0.296706] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2bb0000 [ 0.296742] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1700000 [ 0.296779] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1710000 [ 0.296838] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1720000 [ 0.296886] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1730000 [ 0.296924] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1740000 [ 0.296957] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1750000 [ 0.296989] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1760000 [ 0.297026] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1770000 [ 0.297133] mc-err: mcerr ops are set to t19x [ 0.314453] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.314495] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.314523] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.314549] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.322653] ACPI: Interpreter disabled. [ 0.324087] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.325606] iommu: Default domain type: Translated [ 0.325687] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.326118] SCSI subsystem initialized [ 0.326332] usbcore: registered new interface driver usbfs [ 0.326385] usbcore: registered new interface driver hub [ 0.326457] usbcore: registered new device driver usb [ 0.326955] mc: Linux media interface: v0.10 [ 0.326998] videodev: Linux video capture interface: v2.00 [ 0.327398] pps_core: LinuxPPS API ver. 1 registered [ 0.327418] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.327447] PTP clock support registered [ 0.327774] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.328101] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.328181] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.329164] FPGA manager framework [ 0.330602] trusty trusty: trusty version: Built: 08:57:16 Feb 19 2022 [ 0.330685] trusty trusty: selected api version: 3 (requested 3) [ 0.358547] Advanced Linux Sound Architecture Driver Initialized. [ 0.359259] Bluetooth: Core ver 2.22 [ 0.359307] NET: Registered protocol family 31 [ 0.359326] Bluetooth: HCI device and connection manager initialized [ 0.359348] Bluetooth: HCI socket layer initialized [ 0.359367] Bluetooth: L2CAP socket layer initialized [ 0.359394] Bluetooth: SCO socket layer initialized [ 0.361099] camchar: rtcpu character device driver loaded [ 0.363025] clocksource: Switched to clocksource arch_sys_counter [ 0.761631] VFS: Disk quotas dquot_6.6.0 [ 0.761717] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.762059] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.762644] pnp: PnP ACPI: disabled [ 0.764131] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 0.764181] nvmap_page_pool_init: Total RAM pages: 1918221 [ 0.764200] nvmap_page_pool_init: nvmap page pool size: 239777 pages (936 MB) [ 0.764533] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.775618] la/ptsa driver initialized. [ 0.775798] NET: Registered protocol family 2 [ 0.776035] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.782660] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.782750] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.783223] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.783856] TCP: Hash tables configured (established 65536 bind 65536) [ 0.783980] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.784110] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.784398] NET: Registered protocol family 1 [ 0.785287] RPC: Registered named UNIX socket transport module. [ 0.785323] RPC: Registered udp transport module. [ 0.785343] RPC: Registered tcp transport module. [ 0.785362] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.785404] PCI: CLS 0 bytes, default 64 [ 0.785618] Trying to unpack rootfs image as initramfs... [ 1.048124] Freeing initrd memory: 8196K [ 1.054220] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.054639] kvm [1]: IPA Size Limit: 40 bits [ 1.055275] kvm [1]: vgic interrupt IRQ9 [ 1.055784] kvm [1]: VHE mode initialized successfully [ 1.057445] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.062382] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.063175] NFS: Registering the id_resolver key type [ 1.063243] Key type id_resolver registered [ 1.063265] Key type id_legacy registered [ 1.063345] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.063371] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.063432] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.073488] NET: Registered protocol family 38 [ 1.073537] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239) [ 1.073783] io scheduler mq-deadline registered [ 1.073834] io scheduler kyber registered [ 1.079399] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.081971] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.082046] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.082115] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.082182] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.082258] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.087752] scrncapt: init (heads:4 wins:6 planes:4) [ 1.087987] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.088881] EINJ: ACPI disabled. [ 1.091825] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.091887] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 1.091906] tegra-pmc: ### PMC reset level: L0 [ 1.091922] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.091992] tegra-pmc: PMC Prod config success [ 1.097139] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.208794] random: fast init done [ 1.211997] printk: console [ttyTCU0] enabled [ 2.514791] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.519412] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.524115] arm-smmu 10000000.iommu: stage 1 translation [ 2.529392] arm-smmu 10000000.iommu: stage 2 translation [ 2.535135] arm-smmu 10000000.iommu: nested translation [ 2.540244] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.547416] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.557403] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.560607] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.567422] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.574779] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.580466] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.585192] arm-smmu 12000000.iommu: stage 1 translation [ 2.590439] arm-smmu 12000000.iommu: stage 2 translation [ 2.596122] arm-smmu 12000000.iommu: nested translation [ 2.601551] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.608738] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.618819] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.621862] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.628412] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.635610] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.645530] tegra_profiler: version: 1.146, samples/io: 49/28 [ 2.648810] tegra_profiler: auth: init [ 2.652773] THERMAL EST: found 3 subdevs [ 2.656507] THERMAL EST num_resources: 0 [ 2.660350] [THERMAL EST subdev 0] [ 2.663674] [THERMAL EST subdev 1] [ 2.666808] [THERMAL EST subdev 2] [ 2.670343] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.676552] THERMAL EST: thz register success. [ 2.680768] THERMAL EST: end of probe, return err: 0 [ 2.689863] libphy: Fixed MDIO Bus: probed [ 2.690374] tun: Universal TUN/TAP device driver, 1.6 [ 2.696368] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.702623] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.707951] e1000e: Intel(R) PRO/1000 Network Driver [ 2.713138] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.719069] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.724230] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.730454] PPP generic driver version 2.4.2 [ 2.734680] PPP BSD Compression module registered [ 2.739458] PPP Deflate Compression module registered [ 2.744445] PPP MPPE Compression module registered [ 2.749723] usbcore: registered new interface driver r8152 [ 2.755236] usbcore: registered new interface driver asix [ 2.760390] usbcore: registered new interface driver ax88179_178a [ 2.766516] usbcore: registered new interface driver cdc_ether [ 2.772722] usbcore: registered new interface driver net1080 [ 2.778335] usbcore: registered new interface driver cdc_subset [ 2.784358] usbcore: registered new interface driver zaurus [ 2.790095] usbcore: registered new interface driver cdc_ncm [ 2.795480] usbcore: registered new interface driver aqc111 [ 2.801130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.807210] ohci-pci: OHCI PCI platform driver [ 2.811750] ohci-platform: OHCI generic platform driver [ 2.817523] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.823688] usbcore: registered new interface driver uas [ 2.827786] usbcore: registered new interface driver usb-storage [ 2.834170] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.839926] mousedev: PS/2 mouse device common for all mice [ 2.844966] usbcore: registered new interface driver xpad [ 2.853291] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.855983] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:13 UTC (13) [ 2.863750] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.870251] i2c /dev entries driver [ 2.873410] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.879394] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.884784] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.890176] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.895436] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.900983] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.906395] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.920094] device-mapper: uevent: version 1.0.3 [ 2.920537] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.926069] cpuidle: Initializing cpuidle driver [ 2.930566] sdhci: Secure Digital Host Controller Interface driver [ 2.935320] sdhci: Copyright(c) Pierre Ossman [ 2.939653] Synopsys Designware Multimedia Card Interface Driver [ 2.945643] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.951743] sdhci-tegra 3400000.sdhci: Adding to iommu group 3 [ 2.952789] tegra-bpmp bpmp: firmware: e73a758761f0c6d24a1e69a2ac6b5035 [ 2.983808] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.993159] vdd-1v0: supplied by regulator-dummy [ 2.998736] vdd-1v8-hs: supplied by regulator-dummy [ 3.003682] vdd-1v8-ls: supplied by regulator-dummy [ 3.008535] vdd-1v8-ao: supplied by regulator-dummy [ 3.012616] vddio-ddr-1v1: supplied by regulator-dummy [ 3.017390] vdd-rtc: supplied by regulator-dummy [ 3.019248] spmic-ldo1: supplied by regulator-dummy [ 3.020804] vdd-ao-3v3: supplied by regulator-dummy [ 3.027212] vddio-emmc-3v3: supplied by regulator-dummy [ 3.033600] spmic-ldo4: supplied by regulator-dummy [ 3.035124] vdd-usb-3v3: supplied by regulator-dummy [ 3.041573] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.048074] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.053902] spmic-ldo8: supplied by vdd-1v8-ls [ 3.055748] gpio-510 (gpio_default): hogged as output/high [ 3.057371] gpio-511 (gpio_default): hogged as output/high [ 3.059894] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.194439] max77686-rtc max77620-rtc: registered as rtc0 [ 3.195648] max77620-power max20024-power: Event recorder REG_NVERC : 0x40 [ 3.195985] max77620 4-003c: max77620 probe successful ��WARNING: clk_get_rate: clk_power_ungate on gated domain 27 for gpcclk WARNING: at platform/drivers/pg/pg-gpu-t194.c:185 ��[ 3.696318] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.697521] hid: raw HID events driver (C) Jiri Kosina [ 3.698271] usbcore: registered new interface driver usbhid [ 3.698412] usbhid: USB HID core driver [ 3.700258] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.701503] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.731054] bc00000.rtcpu:hsp-vm1: request 0x40e769e9: response timeout [ 7.747051] bc00000.rtcpu:hsp-vm1: request 0x40acdf66: response timeout [ 7.747255] tegra186-cam-rtcpu bc00000.rtcpu: rce full reset, retry 2/3 [ 9.763078] bc00000.rtcpu:hsp-vm1: request 0x406e6428: response timeout [ 9.763248] tegra186-cam-rtcpu bc00000.rtcpu: rce full reset, retry 3/3 [ 11.779051] bc00000.rtcpu:hsp-vm1: request 0x402fb234: response timeout [ 11.783977] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 11.784756] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 11.786048] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 11.786944] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 11.788940] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 11.789484] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 11.789982] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 11.791940] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 11.792355] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 13.795539] bc00000.rtcpu:hsp-vm1: request 0x46000000: response timeout [ 13.795859] bc00000.rtcpu:hsp-vm1: FW_HASH failed: 0xffffff92 [ 15.811496] bc00000.rtcpu:hsp-vm1: request 0x44bff000: response timeout [ 15.811809] tegra186-cam-rtcpu bc00000.rtcpu: RTCPU trace: IOVM setup error: -110 [ 15.811998] tegra186-cam-rtcpu bc00000.rtcpu: trace boot sync failed: -5 [ 17.827355] bc00000.rtcpu:hsp-vm1: request 0x44bfef80: response timeout [ 19.843673] bc00000.rtcpu:hsp-vm1: request 0x44bfec00: response timeout [ 19.843966] tegra-ivc-bus bc00000.rtcpu:ivc-bus: IOVM setup error: -110 [ 19.844229] tegra186-cam-rtcpu bc00000.rtcpu: ivc-bus boot sync failed: -5 [ 19.844659] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=0 sha1=0000000000000000000000000000000000000000 [ 19.848479] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 19.851889] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 19.853913] tegra186-aondbg aondbg: aondbg driver probe() OK [ 19.856862] denver_knobs_init:MTS_VERSION:54811859 [ 19.862452] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 19.862766] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 19.865517] t19x_cache tegra-cache: probed [ 19.871316] nvpmodel: initialized successfully [ 19.873660] trusty-irq trusty:irq: trusty_irq_create_irq_mapping failed (-22) [ 19.873979] trusty-irq trusty:irq: failed to initialize irq 14, irq will be ignored [ 19.874984] trusty-irq trusty:irq: trusty_irq_create_irq_mapping failed (-22) [ 19.875477] trusty-irq trusty:irq: failed to initialize irq 15, irq will be ignored [ 19.876060] genirq: Flags mismatch irq 10. 00004408 (trusty) vs. 00004408 (trusty) [ 19.876390] trusty-irq trusty:irq: request_percpu_irq failed -16 [ 19.876571] trusty-irq trusty:irq: failed to initialize irq 29, irq will be ignored [ 19.884557] trusty-virtio trusty:virtio: initializing [ 19.886759] trusty_ipc virtio0: vring0: va(pa) (____ptrval____)(0) qsz 32 notifyid 1 [ 19.894065] trusty_ipc virtio0: vring1: va(pa) (____ptrval____)(0) qsz 32 notifyid 2 [ 19.902952] trusty-virtio trusty:virtio: initializing done [ 19.902985] trusty_ipc virtio0: is online [ 19.907590] tegra_hv: get_hvd: not initialized yet [ 19.915973] user_ivc_mempool: hypervisor not present [ 19.922090] usbcore: registered new interface driver snd-usb-audio [ 19.928518] u32 classifier [ 19.930006] input device check on [ 19.933722] Actions configured [ 19.937118] Initializing XFRM netlink socket [ 19.941857] NET: Registered protocol family 10 [ 19.948256] Segment Routing with IPv6 [ 19.949344] NET: Registered protocol family 17 [ 19.953894] NET: Registered protocol family 15 [ 19.958116] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 19.971784] Bluetooth: RFCOMM socket layer initialized [ 19.976498] Bluetooth: RFCOMM ver 1.11 [ 19.980504] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 19.986058] Bluetooth: HIDP socket layer initialized [ 19.992064] 9pnet: Installing 9P2000 support [ 19.995749] Key type dns_resolver registered [ 20.001292] registered taskstats version 1 [ 20.004457] pstore: Using crash dump compression: deflate [ 20.010197] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 20.020083] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 20.022649] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 20.031243] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 20.039635] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 20.159076] tegra194-pcie 14160000.pcie: Link up [ 20.160930] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 20.161132] pci_bus 0004:00: root bus resource [bus 00-ff] [ 20.161320] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 20.161593] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 20.161797] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 20.162181] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 20.162630] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 20.173239] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 20.173735] pci 0004:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 20.174086] pci 0004:01:00.0: reg 0x10: [io size 0x0100] [ 20.174513] pci 0004:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 20.176315] pci 0004:01:00.0: supports D1 D2 [ 20.176555] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 20.186540] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 20.186904] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 20.187271] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 20.187642] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 20.188803] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 20.193971] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 20.200209] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 20.207559] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 20.215925] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 20.226569] pcieport 0004:00:00.0: Adding to iommu group 6 [ 20.230750] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 20.236814] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 20.243675] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 20.252190] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 20.254009] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 20.262776] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 20.270970] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 21.387653] tegra194-pcie 141a0000.pcie: Phy link never came up [ 21.388145] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 21.388336] pci_bus 0005:00: root bus resource [bus 00-ff] [ 21.388519] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 21.388819] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 21.389038] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 21.389444] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 21.389897] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 21.408160] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 21.408459] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 21.411002] pcieport 0005:00:00.0: Adding to iommu group 7 [ 21.412458] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 21.413852] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 21.415434] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 21.416460] pci 0005:00:00.0: Removing from iommu group 7 [ 21.416731] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 21.444740] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 21.448563] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 21.449614] host1x 13e10000.host1x: Adding to iommu group 8 [ 21.471719] host1x 13e10000.host1x: initialized [ 21.473382] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 21.474112] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 21.475360] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 21.475994] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 21.477015] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 21.477584] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 21.478638] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 21.483706] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 21.493436] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 21.500334] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 21.510239] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 21.517365] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 21.527586] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 21.534071] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 21.544432] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 21.551005] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 21.561385] falcon 15340000.vic: Adding to iommu group 17 [ 21.573324] falcon 15340000.vic: initialized [ 21.574357] falcon 15380000.nvjpg: Adding to iommu group 17 [ 21.580731] falcon 15380000.nvjpg: initialized [ 21.581401] falcon 154c0000.nvenc: Adding to iommu group 17 [ 21.591857] falcon 154c0000.nvenc: initialized [ 21.592404] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 21.601926] falcon 15a80000.nvenc1: initialized [ 21.602533] nvdec 15480000.nvdec: Adding to iommu group 17 [ 21.614141] nvdec 15480000.nvdec: initialized [ 21.614695] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 21.623730] nvdec 15140000.nvdec1: initialized [ 21.624237] tsec 15500000.tsec: Adding to iommu group 18 [ 21.631429] tsec 15500000.tsec: initialized [ 21.631905] tsec 15100000.tsecb: Adding to iommu group 19 [ 21.640093] tsec 15100000.tsecb: initialized [ 21.644311] gic 2a41000.agic-controller: GIC IRQ controller registered [ 21.670008] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 21.680586] gpio-374 (wifi-enable): hogged as output/high [ 21.680814] gpio-431 (camera-control-output-low): hogged as output/low [ 21.681104] gpio-432 (camera-control-output-low): hogged as output/low [ 21.683164] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 21.685374] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 21.685948] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 21.692348] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 21.697616] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 21.703677] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 21.709835] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 21.717381] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 21.725240] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 21.735518] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 21.741464] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 21.747405] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 21.756245] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 21.766642] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 21.772506] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 21.780702] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 21.786873] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 21.796207] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 21.802898] pva 16000000.pva0: Adding to iommu group 22 [ 21.821994] pva 16000000.pva0: initialized [ 21.827307] pva 16800000.pva1: Adding to iommu group 23 [ 21.837188] pva 16800000.pva1: initialized [ 21.842146] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 21.851267] nvdla 15880000.nvdla0: initialized [ 21.852803] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 21.860477] nvdla 158c0000.nvdla1: initialized [ 21.863349] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 21.863699] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 21.864390] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 21.864431] tegradccommon 15200000.display-hub: host1x channel mapped [ 21.864680] tegradc 15200000.display: Adding to iommu group 26 [ 21.865179] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 21.865405] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 21.865412] tegra_cec 3960000.tegra_cec: probed [ 21.866573] kfuse 3830000.kfuse: initialized [ 21.866865] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 21.867808] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 21.867822] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 21.868858] serial-tegra 3100000.serial: Adding to iommu group 2 [ 21.870001] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 21.872422] serial-tegra 3110000.serial: Adding to iommu group 2 [ 21.874685] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 21.878978] tegradccommon 15200000.display-hub: dma mapping done [ 21.879630] tegradc 15200000.display: disp0 connected to head0->sor1 [ 21.886865] serial-tegra 3140000.serial: Adding to iommu group 2 [ 21.889529] generic_infoframe_type: 0x87 [ 21.894656] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 21.896038] random: crng init done [ 21.901157] tegradc 15200000.display: DT parsed successfully [ 21.919190] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 21.920010] tegradc 15200000.display: Display dc.0000000011b0dbdb registered with id=0 [ 21.928584] tegra-xusb 3610000.xhci: xHCI Host Controller [ 21.938679] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 21.943626] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 21.949193] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 21.949229] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 21.956713] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 21.962356] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 21.965686] tegra-xusb 3610000.xhci: irq 187, io mem 0x03610000 [ 21.974268] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 21.975690] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 21.978231] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 21.987445] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 21.992964] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.992973] usb usb1: Product: xHCI Host Controller [ 21.992980] usb usb1: Manufacturer: Linux 5.10.65-tegra xhci-hcd [ 21.992986] usb usb1: SerialNumber: 3610000.xhci [ 21.994420] hub 1-0:1.0: USB hub found [ 22.119292] hub 1-0:1.0: 4 ports detected [ 22.124178] tegra-xusb 3610000.xhci: xHCI Host Controller [ 22.128443] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 22.136120] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 22.143873] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 22.151762] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 22.158938] usb usb2: Product: xHCI Host Controller [ 22.163659] usb usb2: Manufacturer: Linux 5.10.65-tegra xhci-hcd [ 22.169894] usb usb2: SerialNumber: 3610000.xhci [ 22.175736] hub 2-0:1.0: USB hub found [ 22.178475] hub 2-0:1.0: 4 ports detected [ 22.213882] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 22.220526] i2c i2c-2: Added multiplexed i2c bus 9 [ 22.222216] i2c i2c-2: Added multiplexed i2c bus 10 [ 22.222479] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 22.381798] irq 73: nobody cared (try booting with the "irqpoll" option) [ 22.382076] CPU: 0 PID: 7 Comm: kworker/u12:0 Not tainted 5.10.65-tegra #1 [ 22.382288] Hardware name: NVIDIA Jetson Xavier NX Developer Kit (DT) [ 22.382512] Workqueue: events_unbound async_run_entry_fn [ 22.382688] Call trace: [ 22.382779] dump_backtrace+0x0/0x1a0 [ 22.382888] show_stack+0x2c/0x40 [ 22.382991] dump_stack+0xd8/0x138 [ 22.383091] __report_bad_irq+0x54/0xe0 [ 22.383205] note_interrupt+0x2d4/0x3a0 [ 22.383316] handle_irq_event_percpu+0x8c/0xa0 [ 22.383419] handle_irq_event+0x4c/0xf0 [ 22.383564] handle_fasteoi_irq+0xbc/0x170 [ 22.383669] generic_handle_irq+0x3c/0x60 [ 22.383772] __handle_domain_irq+0x6c/0xc0 [ 22.383875] efi_header_end+0xa8/0xf0 [ 22.383965] el1_irq+0xd0/0x180 [ 22.384078] __do_softirq+0xb0/0x3e0 [ 22.384187] irq_exit+0xc0/0xe0 [ 22.384290] __handle_domain_irq+0x70/0xc0 [ 22.384392] efi_header_end+0xa8/0xf0 [ 22.384532] el1_irq+0xd0/0x180 [ 22.384804] platform_match+0x0/0xf0 [ 22.385398] bus_for_each_drv+0x88/0xe0 [ 22.387308] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 22.389587] __device_attach_async_helper+0xbc/0xe0 [ 22.389605] async_run_entry_fn+0x48/0x150 [ 22.405090] process_one_work+0x1c0/0x4a0 [ 22.409275] worker_thread+0x50/0x420 [ 22.412866] kthread+0x148/0x170 [ 22.416444] ret_from_fork+0x10/0x18 [ 22.419946] handlers: [ 22.422069] [<00000000d40f20df>] tegra_mcerr_hard_irq threaded [<00000000f9881bc1>] tegra_mcerr_thread [ 22.431468] Disabling IRQ #73 [ 22.434725] arm-smmu 10000000.iommu: Unexpected global fault, this could be serious [ 22.442609] arm-smmu 10000000.iommu: GFSR 0x80000001, GFSYNR0 0x00000000, GFSYNR1 0x00000409, GFSYNR2 0x00000000 [ 22.453386] mc-err: (255) csr_nvdisplayr: EMEM address decode error [ 22.459275] mc-err: status = 0x20064092; addr = 0x ffffffff00; hi_adr_reg=0xff [ 22.461474] tegradc 15210000.display: Adding to iommu group 26 [ 22.467166] mc-err: secure: yes, access-type: read [ 22.478883] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 22.492722] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1305000 KHz, changing to: 1344000 KHz [ 22.493526] tegradc 15210000.display: disp0 connected to head1->sor [ 22.494324] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 22.494332] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 22.494338] usb 1-2: Product: 4-Port USB 2.0 Hub [ 22.494342] usb 1-2: Manufacturer: Generic [ 22.496339] hub 1-2:1.0: USB hub found [ 22.501216] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 22.502831] irq: IRQ254: trimming hierarchy from :pmc@c360000 [ 22.502892] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 22.502952] sdhci-tegra 3400000.sdhci: BWMGR client registration for eMC Successful [ 22.504312] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 22.509664] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 22.510308] tegra194-vi5 15c10000.vi: initialized [ 22.512065] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 22.512256] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 22.512261] nvethernet 2490000.ethernet: failed to read MDIO address [ 22.512266] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 22.512271] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 22.512274] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 22.512607] irq: IRQ255: trimming hierarchy from :pmc@c360000 [ 22.512684] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 255 [ 22.517128] tegradc 15210000.display: DT parsed successfully [ 22.522754] hub 1-2:1.0: 4 ports detected [ 22.523125] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 22.523131] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 22.523135] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 22.524971] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:07:7b:69 [ 22.525027] nvethernet 2490000.ethernet: Macsec not supported [ 22.525819] tegradc 15210000.display: Display dc.000000004b369524 registered with id=0 [ 22.525928] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 22.526627] irq: IRQ257: trimming hierarchy from :pmc@c360000 [ 22.526704] irq: IRQ258: trimming hierarchy from :interrupt-controller@3881000 [ 22.526823] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 22.527468] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 22.528770] tegra-se-nvhost 15810000.se: initialized [ 22.533206] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 22.547405] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 22.555212] mmc0: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 22.555999] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 22.561183] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 22.561190] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 22.574384] tegradc 15210000.display: vblank syncpt # 12 for dc 1 [ 22.580599] mc-err: mcerr: unknown intr source intstatus = 0x00000000, intstatus_1 = 0x00000000 [ 22.588298] tegradc 15210000.display: vpulse3 syncpt # 13 for dc 1 [ 22.620230] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 22.620320] tegra-se-nvhost 15820000.se: initialized [ 22.628304] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 22.632724] tegradc 15210000.display: probed [ 22.636349] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 22.668949] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 22.669863] tegra-se-nvhost 15830000.se: initialized [ 22.671143] mc-err: mcerr: unknown intr source intstatus = 0x00000000, intstatus_1 = 0x00000000 [ 22.677207] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 22.677214] usb 2-3: Product: 4-Port USB 3.0 Hub [ 22.686812] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 22.691049] usb 2-3: Manufacturer: Generic [ 22.701783] hub 2-3:1.0: USB hub found [ 22.705332] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 22.713080] hub 2-3:1.0: 4 ports detected [ 22.716701] tegra-se-nvhost 15840000.se: initialized [ 22.771867] mmc0: host does not support reading read-only switch, assuming write-enable [ 22.779126] mc-err: mcerr: unknown intr source intstatus = 0x00000000, intstatus_1 = 0x00000000 [ 22.780786] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 22.782162] tegra_actmon d230000.actmon: in actmon_register()... [ 22.791056] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 22.794326] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 22.824441] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 22.833588] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 22.840400] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 22.845738] hvc_sysfs: hypervisor is not present [ 22.851403] usb 1-3: Product: Bluetooth Radio [ 22.851407] usb 1-3: Manufacturer: Realtek [ 22.851410] usb 1-3: SerialNumber: 00e04c000001 [ 22.883054] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 22.883123] mc-err: Too many MC errors; throttling prints [ 22.909466] ALSA device list: [ 22.910207] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 22.915632] No soundcards found. [ 22.928615] mmc0: new ultra high speed SDR104 SDXC card at address 5048 [ 22.987553] Console: switching to colour frame buffer device 80x30 [ 22.987906] mmcblk0: mmc0:5048 SD128 116 GiB [ 22.993688] tegradc 15210000.display: fb registered [ 23.005356] GPT:Primary header alternate_lba != Alt. header my_lba [ 23.006304] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 23.008924] GPT:34961407 != 243597311 [ 23.008933] GPT:last_usable_lbas don't match. [ 23.009044] tegradc 15200000.display: disp1 connected to head0->sor1 [ 23.009062] generic_infoframe_type: 0x87 [ 23.009097] tegradc 15200000.display: DT parsed successfully [ 23.009129] tegradc 15200000.display: Display dc.0000000079976563 registered with id=1 [ 23.009214] tegradc 15200000.display: vblank syncpt # 17 for dc 0 [ 23.009220] tegradc 15200000.display: vpulse3 syncpt # 18 for dc 0 [ 23.049489] CPU:0, Error:CBB-NOC@0x2300000,irq=15 [ 23.049493] ************************************** [ 23.049495] * For more Internal Decode Help [ 23.049497] * http://nv/cbberr [ 23.049498] * NVIDIA userID is required to access [ 23.049500] ************************************** [ 23.049502] CPU:0, Error:CBB-NOC [ 23.049505] Error Logger : 0 [ 23.059486] ErrLog0 : 0x80030000 [ 23.059489] Transaction Type : RD - Read, Incrementing [ 23.059492] Error Code : SLV [ 23.059494] Error Source : Target [ 23.059496] Error Description : Target error detected by CBB slave [ 23.059508] AXI2APB_4 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 23.059523] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8195x57005 (on 0x0mm) pclk=148350937 [ 23.059528] Packet header Lock : 0 [ 23.059531] Packet header Len1 : 3 [ 23.059533] NOC protocol version : version >= 2.7 [ 23.059536] ErrLog1 : 0x350e20 [ 23.059538] ErrLog2 : 0x0 [ 23.059540] RouteId : 0x350e20 [ 23.059543] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 23.059545] Targflow : host1x_p2pm/T/host1x_p2pm [ 23.059547] TargSubRange : 7 [ 23.059549] SeqId : 0 [ 23.059568] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 23.059571] ErrLog3 : 0x101c [ 23.059578] ErrLog4 : 0x0 [ 23.059582] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 23.059586] Address accessed : 0x1520101c [ 23.059589] ErrLog5 : 0x809f851 [ 23.059591] Non-Modify : 0x1 [ 23.059594] AXI ID : 0x10 [ 23.059596] Master ID : CCPLEX [ 23.059603] Security Group(GRPSEC): 0x7e [ 23.059697] GPT:34961374 != 243597278 [ 23.059705] GPT:disk_guids don't match. [ 23.059812] Cache : 0x1 -- Bufferable [ 23.059819] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 23.059973] GPT:partition_entry_array_crc32 values don't match: 0x5bc60bd3 != 0x9d097fdf [ 23.059979] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 23.060078] FALCONSEC : 0x0 [ 23.060216] GPT:34961407 != 243597311 [ 23.060222] GPT: Use GNU Parted to correct GPT errors. [ 23.060387] Virtual Queuing Channel(VQC): 0x0 [ 23.060394] ************************************** [ 23.060577] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 23.060715] ------------[ cut here ]------------ [ 23.281192] kernel BUG at /dvs/git/dirty/git-master_linux/kernel/nvidia/drivers/platform/tegra/cbb/tegra19x_cbb.c:553! [ 23.281198] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 23.281203] Modules linked in: [ 23.281218] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.65-tegra #1 [ 23.281224] tegradc 15210000.display: blank - powerdown [ 23.281227] Hardware name: NVIDIA Jetson Xavier NX Developer Kit (DT) [ 23.281248] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 23.281260] pc : tegra194_cbb_error_isr+0x198/0x1b0 [ 23.281288] lr : tegra194_cbb_error_isr+0xcc/0x1b0 [ 23.291892] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 23.297373] sp : ffff800010003df0 [ 23.297384] x29: ffff800010003df0 x28: 0000000000000001 [ 23.300535] Extcon DP: HPD disabled [ 23.306832] x27: ffff800011841308 x26: 0000000000000080 [ 23.312358] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 23.318470] x25: ffff800012199440 x24: 0000000000000001 [ 23.318483] x23: ffff800011a96000 x22: 000000000000000f [ 23.324800] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 23.329402] [ 23.329411] x21: ffff800012014fe0 x20: 0000000000000005 [ 23.334577] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 23.342877] x19: ffff8000120150b8 x18: 0000000000000010 [ 23.342891] x17: ffff800010efc870 x16: ffff800010ef9c70 [ 23.342902] x15: ffff800011d92b30 x14: ffffffffffffffff [ 23.414720] x13: ffff8000900039e7 x12: ffff8000100039f1 [ 23.420315] x11: 616c70736944203a x10: 6572203336353637 [ 23.425651] x9 : ffff800010003d00 x8 : 79616c707369642e [ 23.430988] x7 : ffff8000107456d0 x6 : 000000003f2588cb [ 23.436070] x5 : 00ffffffffffffff x4 : ffff800012980000 [ 23.441664] x3 : 00000000ffffffff x2 : ffff800010236d10 [ 23.446758] x1 : ffff800011d925c0 x0 : 0000000000010001 [ 23.452078] Call trace: [ 23.454972] tegra194_cbb_error_isr+0x198/0x1b0 [ 23.459273] __handle_irq_event_percpu+0x60/0x2a0 [ 23.463805] handle_irq_event_percpu+0x3c/0xa0 [ 23.468526] handle_irq_event+0x4c/0xf0 [ 23.472287] handle_fasteoi_irq+0xbc/0x170 [ 23.476313] generic_handle_irq+0x3c/0x60 [ 23.480354] __handle_domain_irq+0x6c/0xc0 [ 23.484280] efi_header_end+0xa8/0xf0 [ 23.488037] el1_irq+0xd0/0x180 [ 23.491032] cpuidle_enter_state+0xb4/0x400 [ 23.495211] cpuidle_enter+0x3c/0x50 [ 23.498456] call_cpuidle+0x40/0x70 [ 23.501969] do_idle+0x1fc/0x260 [ 23.505624] cpu_startup_entry+0x2c/0x70 [ 23.509131] rest_init+0xd8/0xe4 [ 23.512371] arch_call_rest_init+0x14/0x1c [ 23.516824] start_kernel+0x4c0/0x4f4 [ 23.520174] Code: a9425bf5 a9446bf9 a8c67bfd d65f03c0 (d4210000) [ 23.526282] ---[ end trace 83ea15fdedc9d963 ]--- [ 23.530743] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 23.538283] SMP: stopping secondary CPUs [ 23.542133] Kernel Offset: 0x80000 from 0xffff800010000000 [ 23.547710] PHYS_OFFSET: 0x80000000 [ 23.551317] CPU features: 0x8240002,03002a30 [ 23.555502] Memory Limit: none [ 23.558653] trusty-log panic notifier - trusty version Built: 08:57:16 Feb 19 2022 [ 23.567033] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]---