[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (arm1@arm1-wxz) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) Xavier-NX #20 SMP PREEMPT Thu Oct 13 09:02:32 CST 2022 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2033152 [ 0.000000] DMA zone: 7192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 460288 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2001384 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 30132(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7190536K/8132608K available (15358K kernel code, 2958K rwdata, 6720K rodata, 8640K init, 610K bss, 188408K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009620000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009620000 - 0xffffff8009e90000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e90000 - 0xffffff800a173808 ( 2959 KB) [ 0.000000] .bss : 0xffffff800a173808 - 0xffffff800a20c054 ( 611 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000662] Console: colour dummy device 80x25 [ 0.000674] console [tty0] enabled [ 0.000681] bootconsole [tegra_comb_uart0] disabled [ 0.000695] kmemleak: Kernel memory leak detector disabled [ 0.000714] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000730] pid_max: default: 32768 minimum: 301 [ 0.001791] Security Framework initialized [ 0.002351] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002362] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004002] ftrace: allocating 47262 entries in 185 pages [ 0.398582] sched-energy: Sched-energy-costs installed from DT [ 0.398602] ASID allocator initialised with 65536 entries [ 0.432961] tegra-id: chipid=21917. [ 0.432974] tegra-id: opt_subrevision=1. [ 0.433001] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.433032] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.433042] DTB Build time: Sep 28 2022 14:06:17 [ 0.481204] CPU1: Booted secondary processor [4e0f0040] [ 0.513246] CPU2: Booted secondary processor [4e0f0040] [ 0.545326] CPU3: Booted secondary processor [4e0f0040] [ 0.577649] CPU4: Booted secondary processor [4e0f0040] [ 0.609650] CPU5: Booted secondary processor [4e0f0040] [ 0.609846] Brought up 6 CPUs [ 0.609885] SMP: Total of 6 processors activated. [ 0.609901] CPU features: detected feature: Privileged Access Never [ 0.609908] CPU features: detected feature: LSE atomic instructions [ 0.609914] CPU features: detected feature: User Access Override [ 0.609920] CPU features: detected feature: 32-bit EL0 Support [ 0.611472] CPU: All CPU(s) started at EL2 [ 0.611536] alternatives: patching kernel code [ 0.617997] devtmpfs: initialized [ 0.657048] Initilizing CustomIPI irq domain [ 0.657238] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.657252] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.667227] pinctrl core: initialized pinctrl subsystem [ 0.667489] OS set in device tree is not L4T. [ 0.667709] regulator-dummy: no parameters [ 0.667896] Initializing plugin-manager [ 0.667980] Plugin module not found [ 0.668033] Plugin-manager status disabled [ 0.669056] NET: Registered protocol family 16 [ 0.670081] pstore: using zlib compression [ 0.670105] console [pstore-1] enabled [ 0.670115] pstore: Registered ramoops as persistent store backend [ 0.670124] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.684773] cpuidle: using governor menu [ 0.685943] bpmp: waiting for handshake [ 0.685954] bpmp: handshake completed [ 0.685974] bpmp: synchronizing channels [ 0.685986] bpmp: channels synchronized [ 0.685995] bpmp: mail init ok [ 0.688454] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.688648] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.688655] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.688683] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.688689] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.688695] t19x-arm-smmu 12000000.iommu: nested translation [ 0.688705] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.688713] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.688775] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.688782] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.688789] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.691601] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e94000) [ 0.691631] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.694279] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.696195] tegra_aon_clk_init: ok [ 0.696210] Registering BPMP clocks... [ 0.696327] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.697079] Serial: AMBA PL011 UART driver [ 0.697277] tegra_powergate_init: DONE [ 0.697373] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.697413] DTB Build time: Sep 28 2022 14:06:17 [ 0.700383] Tegra reboot handler registered. [ 0.709635] iommu: Adding device 14160000.pcie to group 0 [ 0.710258] iommu: Adding device 141a0000.pcie to group 1 [ 0.711672] iommu: Adding device 2490000.ether_qos to group 2 [ 0.712166] iommu: Adding device 3100000.serial to group 3 [ 0.712648] iommu: Adding device 3110000.serial to group 4 [ 0.713061] iommu: Adding device 3140000.serial to group 5 [ 0.713777] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.714222] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.714246] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.714270] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.714280] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.714333] tegra-pmc: PMC Prod config success [ 0.714526] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.714541] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.714872] iommu: Adding device 3460000.sdhci to group 6 [ 0.715363] iommu: Adding device 3440000.sdhci to group 7 [ 0.715874] iommu: Adding device 3400000.sdhci to group 8 [ 0.716398] iommu: Adding device 3210000.spi to group 9 [ 0.716821] iommu: Adding device 3230000.spi to group 10 [ 0.717263] iommu: Adding device 3270000.spi to group 11 [ 0.718366] iommu: Adding device 3160000.i2c to group 12 [ 0.718749] iommu: Adding device c240000.i2c to group 13 [ 0.719220] iommu: Adding device 3180000.i2c to group 14 [ 0.719641] iommu: Adding device 3190000.i2c to group 15 [ 0.720126] iommu: Adding device 31b0000.i2c to group 16 [ 0.720538] iommu: Adding device 31c0000.i2c to group 17 [ 0.720976] iommu: Adding device c250000.i2c to group 18 [ 0.721338] iommu: Adding device 31e0000.i2c to group 19 [ 0.721862] iommu: Adding device sound to group 20 [ 0.722357] iommu: Adding device 3510000.hda to group 21 [ 0.722878] iommu: Adding device bc00000.rtcpu to group 22 [ 0.724572] iommu: Adding device 13e10000.host1x to group 23 [ 0.725009] iommu: Adding device 13e10000.host1x:ctx0 to group 24 [ 0.725352] iommu: Adding device 13e10000.host1x:ctx1 to group 25 [ 0.725731] iommu: Adding device 13e10000.host1x:ctx2 to group 26 [ 0.726103] iommu: Adding device 13e10000.host1x:ctx3 to group 27 [ 0.726419] iommu: Adding device 13e10000.host1x:ctx4 to group 28 [ 0.726759] iommu: Adding device 13e10000.host1x:ctx5 to group 29 [ 0.727215] iommu: Adding device 13e10000.host1x:ctx6 to group 30 [ 0.727610] iommu: Adding device 13e10000.host1x:ctx7 to group 31 [ 0.728222] iommu: Adding device 15340000.vic to group 32 [ 0.728583] iommu: Adding device 15380000.nvjpg to group 33 [ 0.728848] iommu: Adding device 15500000.tsec to group 34 [ 0.729176] iommu: Adding device 15100000.tsecb to group 35 [ 0.729453] iommu: Adding device 15480000.nvdec to group 36 [ 0.729709] iommu: Adding device 15140000.nvdec1 to group 37 [ 0.729969] iommu: Adding device 154c0000.nvenc to group 38 [ 0.730281] iommu: Adding device 15a80000.nvenc1 to group 39 [ 0.730677] iommu: Adding device 15880000.nvdla0 to group 40 [ 0.731213] iommu: Adding device 158c0000.nvdla1 to group 41 [ 0.731758] iommu: Adding device 15200000.nvdisplay to group 42 [ 0.735797] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.735871] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.736407] iommu: Adding device 15210000.nvdisplay to group 43 [ 0.736453] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.738047] iommu: Adding device 15c10000.vi to group 44 [ 0.738203] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.738601] iommu: Adding device 14800000.isp to group 45 [ 0.739890] iommu: Adding device 16000000.pva0 to group 46 [ 0.740418] iommu: Adding device 16800000.pva1 to group 47 [ 0.740775] iommu: Adding device 15810000.se to group 48 [ 0.741197] iommu: Adding device 15820000.se to group 49 [ 0.741509] iommu: Adding device 15830000.se to group 50 [ 0.741772] iommu: Adding device 15840000.se to group 51 [ 0.742033] iommu: Adding device c1a0000.aon to group 52 [ 0.743568] iommu: Adding device d000000.bpmp to group 53 [ 0.743945] bpmp: ping status is 0 [ 0.744068] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.747116] bpmp d000000.bpmp: probe ok [ 0.748671] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.749103] iommu: Adding device smmu_test to group 54 [ 0.750381] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.750406] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.750427] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.750468] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.750494] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.750514] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b80000 [ 0.750533] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b90000 [ 0.750568] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2ba0000 [ 0.750589] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2bb0000 [ 0.750612] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1700000 [ 0.750631] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1710000 [ 0.750648] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1720000 [ 0.750688] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1730000 [ 0.750704] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1740000 [ 0.750720] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1750000 [ 0.750737] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1760000 [ 0.750755] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1770000 [ 0.750828] mc-err: mcerr ops are set to t19x [ 0.756210] iommu: Adding device 2600000.dma to group 55 [ 0.761087] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.762316] GPIO line 339 (wifi-enable) hogged as output/high [ 0.762357] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.762394] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.762673] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.769177] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.769245] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.769282] GPIO line 266 (w-disable1) hogged as output/high [ 0.769315] GPIO line 264 (w-disable2) hogged as output/high [ 0.769348] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.769607] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.771935] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.771955] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.771966] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.772705] iommu: Adding device 3550000.xudc to group 56 [ 0.773431] iommu: Adding device 3610000.xhci to group 57 [ 0.775514] arm64_ras arm64_ras: probed [ 0.775987] ras_fhi_enable: FHI 471 enabled on CPU0 [ 0.776041] ras_fhi_enable: FHI 472 enabled on CPU1 [ 0.776122] ras_fhi_enable: FHI 473 enabled on CPU2 [ 0.776217] ras_fhi_enable: FHI 474 enabled on CPU3 [ 0.776292] ras_fhi_enable: FHI 475 enabled on CPU4 [ 0.776374] ras_fhi_enable: FHI 476 enabled on CPU5 [ 0.776564] carmel_ras_enable: RAS enabled on cpu0 [ 0.776759] carmel_ras_enable: RAS enabled on cpu1 [ 0.776966] carmel_ras_enable: RAS enabled on cpu2 [ 0.777190] carmel_ras_enable: RAS enabled on cpu3 [ 0.777388] carmel_ras_enable: RAS enabled on cpu4 [ 0.777575] carmel_ras_enable: RAS enabled on cpu5 [ 0.777655] carmel_ras carmel_ras: probed [ 0.778984] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.779497] tegra-cbb c600000.aon-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.780355] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.781188] tegra-cbb be00000.rce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.781989] tegra-cbb b600000.sce-noc: noc_secure_irq = 488, noc_nonsecure_irq = 487> [ 0.782380] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.783593] vdd-ac-bat: 5000 mV [ 0.784093] vdd-sdmmc3-sw: 3300 mV [ 0.784476] vdd-1v8-sd: 1800 mV [ 0.784824] vdd-3v3-cvb: 3300 mV [ 0.785116] vdd-1v8-cvb: 1800 mV [ 0.785385] vdd-epb-1v0: 1000 mV [ 0.785598] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.785896] avdd-cam-2v8: 2800 mV [ 0.786204] vdd-fan: 5000 mV [ 0.786487] vdd-hdmi-5v0: 5000 mV [ 0.786762] vdd_sys_en: 1200 mV [ 0.788533] norco-model norco_model: model_init_probe [ 0.788545] norco-model norco_model: model:SOMB-JETSON [ 0.820225] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.824754] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.825007] SCSI subsystem initialized [ 0.825298] libata version 3.00 loaded. [ 0.825481] usbcore: registered new interface driver usbfs [ 0.825523] usbcore: registered new interface driver hub [ 0.825562] usbcore: registered new device driver usb [ 0.836478] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.839121] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.847752] vdd-1v0: at 1000 mV [ 0.851787] vdd-1v8-hs: at 1800 mV [ 0.855795] vdd-1v8-ls: at 1800 mV [ 0.859815] vdd-1v8-ao: at 1800 mV [ 0.863815] vddio-ddr-1v1: at 1100 mV [ 0.867593] vdd-rtc: at 800 mV [ 0.868796] spmic-ldo1: at 2375 mV [ 0.875634] vdd-ao-3v3: at 3300 mV [ 0.883662] vddio-emmc-3v3: at 3300 mV [ 0.884785] spmic-ldo4: at 1587 mV [ 0.891726] vdd-usb-3v3: at 3300 mV [ 0.899740] vddio-sdmmc1-3v3: at 3300 mV [ 0.903761] vdd-csi-1v2: at 1200 mV [ 0.905236] spmic-ldo8: at 1800 mV [ 0.909905] GPIO line 246 (gpio_default) hogged as output/high [ 0.911292] GPIO line 247 (gpio_default) hogged as output/high [ 0.911591] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.911866] max77620 4-003c: max77620 probe successful [ 0.912400] media: Linux media interface: v0.10 [ 0.912480] Linux video capture interface: v2.00 [ 0.913837] pps_core: LinuxPPS API ver. 1 registered [ 0.913844] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.913860] PTP clock support registered [ 0.914096] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.914348] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.914379] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.916750] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.916809] trusty trusty: selected api version: 3 (requested 3) [ 0.917774] Advanced Linux Sound Architecture Driver Initialized. [ 0.918298] Bluetooth: Core ver 2.22 [ 0.918359] NET: Registered protocol family 31 [ 0.918365] Bluetooth: HCI device and connection manager initialized [ 0.918375] Bluetooth: HCI socket layer initialized [ 0.918384] Bluetooth: L2CAP socket layer initialized [ 0.918408] Bluetooth: SCO socket layer initialized [ 0.921113] camchar: rtcpu character device driver loaded [ 0.921582] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.921667] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.922445] clocksource: Switched to clocksource arch_sys_counter [ 0.966962] VFS: Disk quotas dquot_6.6.0 [ 0.967056] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.967480] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.968886] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 0.968938] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.969255] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.969262] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.969273] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 0.969282] nvmap_page_pool_init: Total RAM pages: 1986050 [ 0.969287] nvmap_page_pool_init: nvmap page pool size: 248256 pages (969 MB) [ 0.969465] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.969834] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.971943] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 0.983868] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 0.984087] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 0.984277] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 0.984422] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 0.984573] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.985759] la/ptsa driver initialized. [ 0.986122] NET: Registered protocol family 2 [ 0.987089] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.987415] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.988034] TCP: Hash tables configured (established 65536 bind 65536) [ 0.988089] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.988213] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.988637] NET: Registered protocol family 1 [ 0.989196] RPC: Registered named UNIX socket transport module. [ 0.989203] RPC: Registered udp transport module. [ 0.989208] RPC: Registered tcp transport module. [ 0.989213] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.989238] PCI: CLS 0 bytes, default 64 [ 0.989523] Trying to unpack rootfs image as initramfs... [ 1.203286] Freeing initrd memory: 7068K [ 1.218094] random: fast init done [ 1.222573] host1x 13e10000.host1x: initialized [ 1.224148] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.228645] audit: initializing netlink subsys (disabled) [ 1.228686] audit: type=2000 audit(0.848:1): initialized [ 1.229294] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.237083] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.238242] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.238865] 9p: Installing v9fs 9p2000 file system support [ 1.243486] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.243621] io scheduler noop registered [ 1.243839] io scheduler cfq registered (default) [ 1.247374] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.280930] iommu: Adding device 2993000.adsp to group 58 [ 1.367889] iommu: Adding device aconnect@2a41000:adsp_audio to group 59 [ 1.368036] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.380378] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.380818] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.381362] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.381876] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.382375] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.384883] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.385099] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.387691] tsec 15500000.tsec: initialized [ 1.389066] tsec 15100000.tsecb: initialized [ 1.392497] nvdec 15480000.nvdec: initialized [ 1.394834] nvdec 15140000.nvdec1: initialized [ 1.400140] falcon 15340000.vic: initialized [ 1.402007] falcon 15380000.nvjpg: initialized [ 1.403894] falcon 154c0000.nvenc: initialized [ 1.405830] falcon 15a80000.nvenc1: initialized [ 1.409192] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.410859] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.412442] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.413844] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.415329] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.416736] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.418201] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.419631] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.423298] t194-nvcsi 15a00000.nvcsi: initialized [ 1.428357] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.428741] scare-pigeon 14b00000.isp-thi: initialized [ 1.434187] pva 16000000.pva0: initialized [ 1.440068] pva 16800000.pva1: initialized [ 1.444872] nvdla 15880000.nvdla0: initialized [ 1.448121] nvdla 158c0000.nvdla1: initialized [ 1.449385] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.449401] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.449435] tegradccommon 15200000.dc_common: dma mapping done [ 1.450155] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=79 [ 1.450165] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.450413] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.450570] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.450673] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.450680] tegra_cec 3960000.tegra_cec: probed [ 1.451577] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.451626] generic_infoframe_type: 0x87 [ 1.451733] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.451778] tegradc 15200000.nvdisplay: Display dc.ffffff800bd50000 registered with id=0 [ 1.456629] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.456638] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.456644] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.456901] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.456911] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.459881] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.459890] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.462012] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.463444] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.463453] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.463746] kfuse 3830000.kfuse: initialized [ 1.465068] tegradc 15200000.nvdisplay: probed [ 1.465637] Console: switching to colour frame buffer device 80x30 [ 1.465667] tegradc 15200000.nvdisplay: fb registered [ 1.465899] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.466362] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.466392] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.466501] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.466535] tegradc 15210000.nvdisplay: Display dc.ffffff800bed0000 registered with id=1 [ 1.466697] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.466706] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.469628] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.471971] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.473021] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.473979] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.474988] console [ttyTCU0] enabled [ 1.475225] [drm] Initialized [ 1.476402] tegradc 15210000.nvdisplay: probed [ 1.476735] tegradc 15210000.nvdisplay: fb registered [ 1.480918] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.482409] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.483926] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.485376] brd: module loaded [ 1.485448] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.485631] tegradc 15210000.nvdisplay: dp: Failed for I2C write addr:80, size:1, stat:0x10000100 [ 1.486668] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.486804] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.486940] tegra_nvdisp_handle_pd_enable: Unpowergated Head2 pd [ 1.490189] loop: module loaded [ 1.490308] new_mcu 1-0038: nvidia new_mcu i2c_probe [ 1.490317] new_mcu 1-0038: new_mcu 1==============795 [ 1.491877] Parent Clock set for DC pll_d [ 1.496669] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.498179] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.499668] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.501173] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.501350] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.502204] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.503702] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.505211] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.506679] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.506857] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.507703] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.509219] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.510619] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.512103] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.512254] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.513101] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.514603] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.516090] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.516563] new_mcu 1-0038: new_mcu 1==============802 [ 1.517585] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.517735] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.517912] tegradc 15210000.nvdisplay: dp: failed to exit panel power save mode (0xfffffff2) [ 1.518171] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 1.518178] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 1.618515] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.618527] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 1.624950] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.625156] tegra_profiler: auth: init [ 1.625767] THERMAL EST: found 3 subdevs [ 1.625775] THERMAL EST num_resources: 0 [ 1.625782] [THERMAL EST subdev 0] [ 1.625789] [THERMAL EST subdev 1] [ 1.625795] [THERMAL EST subdev 2] [ 1.625807] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.626224] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.626230] THERMAL EST: thz register success. [ 1.626395] THERMAL EST: end of probe, return err: 0 [ 1.626481] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 1.627114] sd: No Scsi addr parsed to reserve index [ 1.627142] hisi_sas: driver version v1.6 [ 1.627195] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.628741] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.630283] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.631841] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.631887] m25p80 spi0.0: w25q128fw (16384 Kbytes) [ 1.631997] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.632866] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.634404] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.635743] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.637300] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.637473] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.638158] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.639681] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.639935] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.639942] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.639951] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.640177] 1 ofpart partitions found on MTD device spi6.0 [ 1.640183] Creating 1 MTD partitions on "spi6.0": [ 1.640204] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.641011] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.642461] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.642524] libphy: Fixed MDIO Bus: probed [ 1.642620] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.643079] tun: Universal TUN/TAP device driver, 1.6 [ 1.643085] tun: (C) 1999-2004 Max Krasnyansky [ 1.643371] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 2 [ 1.643753] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.643758] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.643791] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.643796] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.643837] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.643841] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.643869] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.643874] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.644896] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 1 [ 1.646401] tegradc 15210000.nvdisplay: dp: aux write retry (0x10000100) -- 0 [ 1.647886] tegradc 15210000.nvdisplay: dp: aux write got error (0x10000100) [ 1.648064] tegradc 15210000.nvdisplay: dp: Failed to write DPCD data. CMD 0x600, Status 0x10000100 [ 1.648244] tegradc 15210000.nvdisplay: dp: failed to exit panel power save mode (0xfffffff2) [ 1.648405] hpd: edid read prepare failed [ 1.648510] hpd: DC from connected to disconnected [ 1.889638] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.890248] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 37 fe d7 [ 1.890265] Using phyrst_lpmode = 1 from DT [ 1.890356] libphy: dwc_phy: probed [ 1.892633] PPP generic driver version 2.4.2 [ 1.893000] PPP BSD Compression module registered [ 1.893008] PPP Deflate Compression module registered [ 1.893026] PPP MPPE Compression module registered [ 1.893032] NET: Registered protocol family 24 [ 1.893072] usbcore: registered new interface driver r8152 [ 1.893100] usbcore: registered new interface driver asix [ 1.893128] usbcore: registered new interface driver ax88179_178a [ 1.893151] usbcore: registered new interface driver cdc_ether [ 1.893177] usbcore: registered new interface driver net1080 [ 1.893227] usbcore: registered new interface driver cdc_subset [ 1.893253] usbcore: registered new interface driver zaurus [ 1.893286] usbcore: registered new interface driver cdc_ncm [ 1.893335] usbcore: registered new interface driver qmi_wwan_q [ 1.893364] usbcore: registered new interface driver qmi_wwan_longsung [ 1.893379] GobiNet: Quectel_WCDMA<E_Linux&Android_GobiNet_Driver_V1.3.0 [ 1.893405] usbcore: registered new interface driver GobiNet [ 1.893874] VFIO - User Level meta-driver version: 0.3 [ 1.895059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.895077] ehci-pci: EHCI PCI platform driver [ 1.895107] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.895117] ohci-pci: OHCI PCI platform driver [ 1.895143] ohci-platform: OHCI generic platform driver [ 1.899662] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.901557] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f56c3000 id [ 1.901826] usbcore: registered new interface driver cdc_wdm [ 1.902329] usbcore: registered new interface driver uas [ 1.902378] usbcore: registered new interface driver usb-storage [ 1.902476] usbcore: registered new interface driver usbserial [ 1.902501] usbcore: registered new interface driver option [ 1.902525] usbserial: USB Serial support registered for GSM modem (1-port) [ 1.904308] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.904342] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.904359] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.905137] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.905203] tegra-xusb 3610000.xhci: irq 466, io mem 0x03610000 [ 1.905476] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.905484] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.905490] usb usb1: Product: xHCI Host Controller [ 1.905496] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.905502] usb usb1: SerialNumber: 3610000.xhci [ 1.906005] hub 1-0:1.0: USB hub found [ 1.906121] hub 1-0:1.0: 4 ports detected [ 1.906762] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.906773] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.906783] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.907116] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.907125] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.907131] usb usb2: Product: xHCI Host Controller [ 1.907137] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.907142] usb usb2: SerialNumber: 3610000.xhci [ 1.907545] hub 2-0:1.0: USB hub found [ 1.907570] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.907585] hub 2-0:1.0: 4 ports detected [ 1.907650] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.908318] Wake76 for irq=199 [ 1.908324] Wake77 for irq=199 [ 1.908328] Wake78 for irq=199 [ 1.908332] Wake79 for irq=199 [ 1.908336] Wake80 for irq=199 [ 1.908340] Wake81 for irq=199 [ 1.908344] Wake82 for irq=199 [ 1.908411] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 1.908419] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 1.908485] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.908497] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.908523] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.908773] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.909305] mousedev: PS/2 mouse device common for all mice [ 1.909437] usbcore: registered new interface driver xpad [ 2.011170] usb usb2: usb_suspend_both: status 0 [ 2.043696] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.045175] Wake73 for irq=42 [ 2.046452] rtc rtc1: alarm rtc device [ 2.046469] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.046491] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.046620] i2c /dev entries driver [ 2.048292] i2c-mux-gpio cam_i2cmux: i2c_mux======gpios:1 [ 2.048300] i2c_mux======gpio:200 [ 2.048310] i2c-mux-gpio cam_i2cmux: Failed to request GPIO 200 [ 2.049294] max77620-power max20024-power: Event recorder REG_NVERC : 0x54 [ 2.055348] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.055684] FAN dev name: pwm-fan [ 2.055729] FAN:gpio request success. [ 2.055740] FAN: can't find tach_gpio [ 2.055750] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.055776] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.055981] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.055990] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.056905] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.056914] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.056921] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.056927] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.056933] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.056939] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.056944] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.056950] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.056957] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.056964] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.057718] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.058558] device-mapper: uevent: version 1.0.3 [ 2.058995] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.062987] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.063984] cpuidle: Initializing cpuidle driver [ 2.064694] sdhci: Secure Digital Host Controller Interface driver [ 2.064702] sdhci: Copyright(c) Pierre Ossman [ 2.064706] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.065606] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 2.067477] CMDQ: cmdq_platfm_init successful [ 2.067913] sdhci-tegra 3440000.sdhci: Got CD GPIO [ 2.070295] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 2.071966] sdhci-tegra 3440000.sdhci: wakeup init done, cdirq 323 [ 2.073770] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 2.074391] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 2.076254] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 248 [ 2.081457] tegra-se-nvhost 15810000.se: initialized [ 2.082898] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.083483] tegra-se-nvhost 15820000.se: initialized [ 2.084757] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.085725] tegra-se-nvhost 15830000.se: initialized [ 2.086391] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.087472] tegra-se-nvhost 15840000.se: initialized [ 2.088429] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.089578] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.089692] hidraw: raw HID events driver (C) Jiri Kosina [ 2.090782] usbcore: registered new interface driver usbhid [ 2.090786] usbhid: USB HID core driver [ 2.094914] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.095836] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.096238] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.096813] denver_knobs_init:MTS_VERSION:53250041 [ 2.097089] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.097699] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.098026] t19x_cache tegra-cache: probed [ 2.100006] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.100016] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.100521] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.100891] PLL_AON clock registered [ 2.102677] Clocks initialized successfully [ 2.104416] nvpmodel: initialized successfully [ 2.105439] trusty-virtio trusty:virtio: initializing [ 2.105656] trusty_ipc virtio0: vring0: va(pa) ffffffc1f1094000(0) qsz 32 notifyid 1 [ 2.105666] trusty_ipc virtio0: vring1: va(pa) ffffffc1f1096000(0) qsz 32 notifyid 2 [ 2.105831] trusty-virtio trusty:virtio: initializing done [ 2.106108] trusty_ipc virtio0: is online [ 2.106850] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.107188] usbcore: registered new interface driver snd-usb-audio [ 2.107540] es8316_i2c_probe 1141========================================= [ 2.107546] es8316_i2c_probe 1146========================================= [ 2.107600] es8316_i2c_probe 1160========================================= [ 2.107612] es8316_i2c_probe 1215========================================= ret:0 [ 2.110501] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.119259] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.119426] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.119556] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.119717] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.119862] gpio tegra-gpio wake51 for gpio=130(Q:2) [ 2.119913] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.130590] gpio tegra-gpio wake8 for gpio=55(G:7) [ 2.130662] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.160352] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 2.174216] mmc0: periodic cache flush enabled [ 2.174232] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 2.174815] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 2.175055] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 2.175250] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 2.175414] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 2.178294] OPE platform probe [ 2.178389] OPE platform probe successful [ 2.182468] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.184261] add_dai_links 728========================================= [ 2.184864] codec_init 652========================================= [ 2.184905] set_dai_ops 689========================================= [ 2.242494] usb 1-3: new high-speed USB device number 2 using tegra-xusb [ 2.250088] es8316_probe 1047wwwwwwwxxxxx========================================= [ 2.250134] es8316_probe 1059========================================= [ 2.256564] es8316_probe 1065========================================= [ 2.262895] usb 1-3: New USB device found, idVendor=1a40, idProduct=0201 [ 2.262915] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.262919] usb 1-3: Product: USB 2.0 Hub [MTT] [ 2.263745] hub 1-3:1.0: USB hub found [ 2.263811] hub 1-3:1.0: 7 ports detected [ 2.377704] es8316_init_regs 944========================================= [ 2.383182] es8316_probe 1092=========================================ret:0 [ 2.387952] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.388092] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.388245] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.388367] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.388485] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.388601] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.388699] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.388820] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.388934] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.389050] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.389160] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.389290] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.389386] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.389499] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.389597] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.389698] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.389797] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.389911] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.390028] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.390149] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.392701] tegra_machine_es8316_init 590========================================= [ 2.392709] es8316_set_dai_sysclk 566=========================================freq:12288000 [ 2.392713] es8316_set_dai_fmt 602========================================= [ 2.401845] tegra-asoc: sound: ASoC: no source widget found for x MIC [ 2.401997] tegra-asoc: sound: ASoC: Failed to add route x MIC -> direct -> x IN [ 2.402174] tegra-asoc: sound: ASoC: no source widget found for x MIC [ 2.402285] tegra-asoc: sound: ASoC: Failed to add route x MIC -> direct -> x IN [ 2.402536] tegra-asoc: sound: ASoC: no source widget found for b MIC1 [ 2.402650] tegra-asoc: sound: ASoC: Failed to add route b MIC1 -> direct -> b IN [ 2.402810] tegra-asoc: sound: ASoC: no source widget found for c MIC2 [ 2.402936] tegra-asoc: sound: ASoC: Failed to add route c MIC2 -> direct -> c IN [ 2.403101] tegra-asoc: sound: ASoC: no source widget found for d DMIC [ 2.403215] tegra-asoc: sound: ASoC: Failed to add route d DMIC -> direct -> d IN [ 2.406482] usb 1-3: usb_suspend_both: status 0 [ 2.406566] usb usb1: usb_suspend_both: status 0 [ 2.412736] es8316 1-0010: ASoC: Failed to create x Left Hp mixer debugfs file [ 2.412745] es8316 1-0010: ASoC: Failed to create x Right Hp mixer debugfs file [ 2.412755] es8316 1-0010: ASoC: Failed to create x HPCP L debugfs file [ 2.412761] es8316 1-0010: ASoC: Failed to create x HPCP R debugfs file [ 2.412770] es8316 1-0010: ASoC: Failed to create x HPVOL L debugfs file [ 2.412778] es8316 1-0010: ASoC: Failed to create x HPVOL R debugfs file [ 2.421170] u32 classifier [ 2.421175] Actions configured [ 2.421255] Initializing XFRM netlink socket [ 2.421820] NET: Registered protocol family 10 [ 2.422650] NET: Registered protocol family 17 [ 2.422672] NET: Registered protocol family 15 [ 2.422732] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.422750] 9pnet: Installing 9P2000 support [ 2.422786] Key type dns_resolver registered [ 2.422984] Registered cp15_barrier emulation handler [ 2.423003] Registered setend emulation handler [ 2.424398] registered taskstats version 1 [ 2.424666] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.426194] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.426214] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.426224] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.426230] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.458468] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.458476] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.534493] tegra-pcie-dw 14160000.pcie: link is up [ 2.534772] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.534785] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.534809] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.534815] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.534819] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.534847] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.535009] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.535215] iommu: Adding device 0004:00:00.0 to group 60 [ 2.535532] pci 0004:01:00.0: [10ec:8168] type 00 class 0x020000 [ 2.535644] pci 0004:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.535649] pci 0004:01:00.0: reg 0x10: [io size 0x0100] [ 2.535801] pci 0004:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.535900] pci 0004:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 2.536607] pci 0004:01:00.0: supports D1 D2 [ 2.536611] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.536958] iommu: Adding device 0004:01:00.0 to group 61 [ 2.547475] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 2.547482] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.547490] pci 0004:01:00.0: BAR 4: assigned [mem 0x1740000000-0x1740003fff 64bit] [ 2.547587] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740004000-0x1740004fff 64bit] [ 2.547665] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.547693] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.547699] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.547708] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 2.547727] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 2.547785] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 2.548029] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.548035] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 2.548041] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.548119] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.548434] r8168 0004:01:00.0: enabling device (0000 -> 0003) [ 2.548515] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 2.562870] r8168 0004:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 2.562944] r8168 0004:01:00.0 (unnamed net_device) (uninitialized): bad mac address at /chosen/nvidia,ethernet-mac: missing. [ 2.563188] r8168 0004:01:00.0 (unnamed net_device) (uninitialized): Assigning random ethernet address a2:8f:ce:2f:3a:12 [ 2.563615] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.563631] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 2.563839] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.564001] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.564012] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 2.652027] tegra_nvdisp_handle_pd_disable: Powergated Head2 pd [ 2.652108] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 2.652605] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 2.652654] tegradc 15210000.nvdisplay: blank - powerdown [ 2.652665] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 2.652668] Extcon DP: HPD disabled [ 2.652672] hpd: hpd_switch 0 [ 2.652676] hpd: switching from state 2 (Check EDID) to state 3 (Disabled) [ 2.670959] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.670977] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.670985] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.670991] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.747084] FAN rising trip_level:1 cur_temp:57050 trip_temps[2]:60000 [ 2.778474] tegra-pcie-dw 141a0000.pcie: link is up [ 2.778756] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 2.778764] pci_bus 0005:00: root bus resource [bus 00-ff] [ 2.778771] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 2.778776] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 2.778781] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 2.778805] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 2.778925] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 2.779143] iommu: Adding device 0005:00:00.0 to group 62 [ 2.779487] pci 0005:01:00.0: [126f:2263] type 00 class 0x010802 [ 2.779605] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.780496] iommu: Adding device 0005:01:00.0 to group 63 [ 2.791300] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 2.791308] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f40003fff 64bit] [ 2.791368] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 2.791376] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 2.791392] pci 0005:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 2.791436] pci 0005:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 2.791670] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 2.791675] pci 0005:01:00.0: Signaling PME through PCIe PME interrupt [ 2.791682] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 2.791795] aer 0005:00:00.0:pcie002: service driver aer loaded [ 2.792144] nvme nvme0: pci function 0005:01:00.0 [ 2.792175] nvme 0005:01:00.0: enabling device (0000 -> 0002) [ 2.802234] tegra-cbb 14040000.cv-noc: noc_secure_irq = 92, noc_nonsecure_irq = 91> [ 2.804661] ##########wxz20211026##########75111############### [ 2.807130] gpiochip_setup_dev: registered GPIOs 220 to 239 on device: gpiochip3 (f75111_0x4e) [ 2.807137] Fintek,f75111 8-004e: 202108141636##########################ret:0,addr:4e [ 2.809132] ####################default_0x4e############### [ 2.809211] ##########wxz20211026##########75111############### [ 2.811725] gpiochip_setup_dev: registered GPIOs 200 to 219 on device: gpiochip4 (f75111_0x37) [ 2.811740] Fintek,f75111 8-0037: 202108141636##########################ret:0,addr:37 [ 2.813786] ####################default_0x37############### [ 2.815909] tegra194-isp5 14800000.isp: initialized [ 2.822636] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 2.825248] tegra194-vi5 15c10000.vi: initialized [ 2.829334] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 2.829455] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 2.829623] i2c-mux-gpio cam_i2cmux: i2c_mux======gpios:1 [ 2.829627] i2c_mux======gpio:200 [ 2.831408] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.854506] i2c_mux tx2======0 [ 2.854511] i2c_mux======base:0 gpio:200 [ 2.855557] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.855595] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.855842] imx219 9-0010: board setup failed [ 2.855986] imx219: probe of 9-0010 failed with error -121 [ 2.856027] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.856505] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.879662] i2c_mux tx2======1 [ 2.879667] i2c_mux======base:0 gpio:200 [ 2.880556] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.880593] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.880825] imx219 10-0010: board setup failed [ 2.880969] imx219: probe of 10-0010 failed with error -121 [ 2.881016] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.881023] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 2.881187] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 2.885294] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 2.885309] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 2.885314] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 2.885384] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 2.885411] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 2.885415] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 2.889510] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 2.889553] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 2.889566] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 2.889799] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 2.889827] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 2.889832] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 2.890159] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 2.890202] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 2.890207] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 2.890438] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 2.891164] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 2.924801] nvme0n1: p1 [ 2.968503] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 2.968883] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 2.969071] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 2.969242] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 2.969558] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 2.969622] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 2.969873] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (67) [ 2.969878] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 2.971077] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 2.971433] Wake83 for irq=211 [ 2.971525] gpio tegra-gpio wake67 for gpio=48(G:0) [ 2.971599] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 2.971720] input: gpio-keys as /devices/gpio-keys/input/input4 [ 3.003515] tegra_rtc c2a0000.rtc: setting system clock to 2022-10-13 01:11:25 UTC (1665623485) [ 3.003930] mmcblk mmc0:0001: Card claimed for testing. [ 3.041580] bpmp: mounted debugfs mirror [ 3.042747] usb 1-3: reset high-speed USB device number 2 using tegra-xusb [ 3.048345] ALSA device list: [ 3.048351] #0: tegra-hda-xnx at 0x3518000 irq 66 [ 3.048355] #1: es8316-tegra [ 3.050097] Freeing unused kernel memory: 8640K [ 3.088037] Root device found: mmcblk0p1 [ 3.090064] Found dev node: /dev/mmcblk0p1 [ 3.160289] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 3.160296] EXT4-fs (mmcblk0p1): recovery complete [ 3.165127] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.168027] Rootfs mounted over mmcblk0p1 [ 3.182887] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 3.193782] Switching from initrd to actual rootfs [ 3.209612] usb 2-3: New USB device found, idVendor=05e3, idProduct=0626 [ 3.209619] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.209623] usb 2-3: Product: USB3.1 Hub [ 3.209627] usb 2-3: Manufacturer: GenesysLogic [ 3.212756] hub 2-3:1.0: USB hub found [ 3.213123] hub 2-3:1.0: 4 ports detected [ 3.214501] usb 1-3: usb_suspend_both: status 0 [ 3.319818] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.323531] cgroup: cgroup2: unknown option "nsdelegate" [ 3.331631] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.332290] systemd[1]: Detected architecture arm64. [ 3.338193] systemd[1]: Set hostname to . [ 3.378549] usb 2-3: usb_suspend_both: status 0 [ 3.378933] usb usb2: usb_suspend_both: status 0 [ 3.421389] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.421401] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.438506] usb 1-2: new high-speed USB device number 3 using tegra-xusb [ 3.461226] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610 [ 3.461233] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.461237] usb 1-2: Product: USB2.1 Hub [ 3.461242] usb 1-2: Manufacturer: GenesysLogic [ 3.462130] hub 1-2:1.0: USB hub found [ 3.462453] hub 1-2:1.0: 4 ports detected [ 3.570792] random: systemd: uninitialized urandom read (16 bytes read) [ 3.570825] systemd[1]: Reached target Swap. [ 3.571039] random: systemd: uninitialized urandom read (16 bytes read) [ 3.573537] systemd[1]: Created slice User and Session Slice. [ 3.573588] random: systemd: uninitialized urandom read (16 bytes read) [ 3.574697] systemd[1]: Created slice System Slice. [ 3.574775] systemd[1]: Reached target Slices. [ 3.575003] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.618945] can: controller area network core (rev 20120528 abi 9) [ 3.619080] NET: Registered protocol family 29 [ 3.624465] can: raw protocol (rev 20120528) [ 3.625868] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.634775] CAN device driver interface [ 3.638482] usb 1-3: usb_suspend_both: status 0 [ 3.782475] usb 1-2.2: new low-speed USB device number 4 using tegra-xusb [ 3.807199] usb 1-2.2: New USB device found, idVendor=413c, idProduct=301a [ 3.807207] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.807212] usb 1-2.2: Product: Dell MS116 USB Optical Mouse [ 3.807216] usb 1-2.2: Manufacturer: PixArt [ 3.810496] input: PixArt Dell MS116 USB Optical Mouse as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:413C:301A.0001/input/input5 [ 3.810932] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3610000.xhci-2.2/input0 [ 3.866745] FAN rising trip_level:2 cur_temp:60000 trip_temps[3]:68000 [ 3.914593] systemd-journald[2411]: Received request to flush runtime journal from PID 1 [ 3.918503] usb 1-2.3: new low-speed USB device number 5 using tegra-xusb [ 3.949221] usb 1-2.3: New USB device found, idVendor=413c, idProduct=2113 [ 3.949229] usb 1-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.949235] usb 1-2.3: Product: Dell KB216 Wired Keyboard [ 3.954217] input: Dell KB216 Wired Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.3/1-2.3:1.0/0003:413C:2113.0002/input/input6 [ 4.012084] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-3610000.xhci-2.3/input0 [ 4.017557] input: Dell KB216 Wired Keyboard as /devices/3610000.xhci/usb1/1-2/1-2.3/1-2.3:1.1/0003:413C:2113.0003/input/input7 [ 4.074857] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-3610000.xhci-2.3/input1 [ 4.128464] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.554783] using random self ethernet address [ 4.554907] using random host ethernet address [ 5.027955] random: crng init done [ 5.028065] random: 7 urandom warning(s) missed due to ratelimiting [ 5.140091] Mass Storage Function, version: 2009/09/11 [ 5.140100] LUN: removable file: (no medium) [ 5.147208] using random self ethernet address [ 5.147329] using random host ethernet address [ 5.167542] rndis0: HOST MAC 42:2c:77:93:d3:a8 [ 5.167958] rndis0: MAC 42:2c:77:93:d3:a9 [ 5.168767] usb0: HOST MAC 42:2c:77:93:d3:aa [ 5.168958] usb0: MAC 42:2c:77:93:d3:ab [ 5.168986] tegra-xudc-new 3550000.xudc: exiting ELPG [ 5.169601] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 5.169631] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 5.169672] tegra-xudc-new 3550000.xudc: entering ELPG [ 5.169945] tegra-xudc-new 3550000.xudc: entering ELPG done [ 5.169960] tegra-xudc-new 3550000.xudc: exiting ELPG [ 5.170400] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 5.170474] tegra-xudc-new 3550000.xudc: entering ELPG [ 5.170663] tegra-xudc-new 3550000.xudc: entering ELPG done [ 5.176177] l4tbr0: port 1(rndis0) entered blocking state [ 5.176185] l4tbr0: port 1(rndis0) entered disabled state [ 5.176426] device rndis0 entered promiscuous mode [ 5.207944] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 5.215722] l4tbr0: port 2(usb0) entered blocking state [ 5.215729] l4tbr0: port 2(usb0) entered disabled state [ 5.226258] device usb0 entered promiscuous mode [ 5.234938] Message RAM Configuration | base addr |0x0c312000| | sidfc_flssa |0x00000000| | xidfc_flesa |0x00000040| | rxf0c_f0sa |0x000000c0| | rxf1c_f1sa |0x000009c0| | rxbc_rbsa |0x000009c0| | txefc_efsa |0x000009c0| | txbc_tbsa |0x00000a40| | tmc_tmsa |0x00000ec0| [ 5.235098] Release 3.2.0 from 19.12.2014 [ 5.266977] net can0: mttcan device registered (regs=ffffff8008007000, irq=65) [ 5.268467] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 5.527820] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 5.595276] cpu-throttle-alert cooling device registered. [ 5.595801] gpu-throttle-alert cooling device registered. [ 5.598824] aux-throttle-alert cooling device registered. [ 5.674259] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 5.678195] eth1: 0xffffff800b21b000, aa:97:a0:b6:ae:97, IRQ 557 [ 5.743008] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 5.809630] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.870875] zram: Added device: zram0 [ 5.875242] zram: Added device: zram1 [ 5.878829] zram: Added device: zram2 [ 5.883730] zram: Added device: zram3 [ 5.887372] zram: Added device: zram4 [ 5.892981] zram: Added device: zram5 [ 5.934492] zram0: detected capacity change from 0 to 679247872 [ 6.032800] Adding 663324k swap on /dev/zram0. Priority:5 extents:1 across:663324k SS [ 6.040130] zram1: detected capacity change from 0 to 679247872 [ 6.074419] Adding 663324k swap on /dev/zram1. Priority:5 extents:1 across:663324k SS [ 6.084453] zram2: detected capacity change from 0 to 679247872 [ 6.118602] Adding 663324k swap on /dev/zram2. Priority:5 extents:1 across:663324k SS [ 6.124348] gpio tegra-gpio wake20 for gpio=52(G:4) [ 6.126769] zram3: detected capacity change from 0 to 679247872 [ 6.141889] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.181677] Adding 663324k swap on /dev/zram3. Priority:5 extents:1 across:663324k SS [ 6.189249] zram4: detected capacity change from 0 to 679247872 [ 6.231348] Adding 663324k swap on /dev/zram4. Priority:5 extents:1 across:663324k SS [ 6.235338] zram5: detected capacity change from 0 to 679247872 [ 6.271798] Adding 663324k swap on /dev/zram5. Priority:5 extents:1 across:663324k SS [ 6.559959] Bridge firewalling registered [ 6.606046] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 7.041065] Netfilter messages via NETLINK v0.30. [ 7.047006] ctnetlink v0.93: registering with nfnetlink. [ 7.226835] FAN rising trip_level:1 cur_temp:59900 trip_temps[2]:60000 [ 7.350731] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 7.395440] tegradc 15200000.nvdisplay: blank - powerdown [ 7.395455] tegradc 15210000.nvdisplay: blank - powerdown [ 8.286399] fuse init (API version 7.26) [ 9.008043] eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 9.009198] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.373126] tegra_machine_pcm_startup 466========================================= [ 10.373805] tegra_machine_pcm_hw_params 449========================================= [ 10.373814] tegra_machine_dai_init 311 rate:44100========================================= [ 10.382315] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 10.382324] tegra_machine_set_params 253========================================= [ 10.382367] tegra_machine_dai_init===========8316=======es8316-playback===========20211015 362 [ 10.382391] es8316_set_dai_sysclk 566=========================================freq:12288000 [ 10.538616] tegra_machine_codec_get_format 221========================================= [ 10.538730] tegra_machine_codec_get_rate 197========================================= [ 10.561717] tegra_machine_pcm_shutdown 477========================================= [ 10.567672] tegra_machine_pcm_startup 466========================================= [ 10.568297] tegra_machine_pcm_hw_params 449========================================= [ 10.568305] tegra_machine_dai_init 311 rate:44100========================================= [ 10.568311] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 10.568315] tegra_machine_set_params 253========================================= [ 10.568353] tegra_machine_dai_init===========8316=======es8316-playback===========20211015 362 [ 10.568360] es8316_set_dai_sysclk 566=========================================freq:12288000 [ 10.570011] ==================>>>>>>>>es8316_pcm_startup es8316_init_reg=0 [ 10.570021] es8316_pcm_hw_params 740========================================= [ 10.670510] es8316--------pcm_pop_work_events [ 10.705017] tegra_machine_codec_get_format 221========================================= [ 10.705123] tegra_machine_codec_get_rate 197========================================= [ 10.719689] tegra_machine_pcm_startup 466========================================= [ 10.720021] tegra_machine_pcm_hw_params 449========================================= [ 10.720029] tegra_machine_dai_init 311 rate:44100========================================= [ 10.720035] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 10.720040] tegra_machine_set_params 253========================================= [ 10.720077] tegra_machine_dai_init===========8316=======es8316-playback===========20211015 362 [ 10.720084] es8316_set_dai_sysclk 566=========================================freq:12288000 [ 10.721040] tegra_machine_pcm_shutdown 477========================================= [ 10.721183] tegra_machine_pcm_shutdown 477========================================= [ 10.741733] tegra_machine_pcm_startup 466========================================= [ 10.742363] tegra_machine_pcm_hw_params 449========================================= [ 10.742370] tegra_machine_dai_init 311 rate:44100========================================= [ 10.742377] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 10.742381] tegra_machine_set_params 253========================================= [ 10.742496] tegra_machine_dai_init===========8316=======es8316-playback===========20211015 362 [ 10.742504] es8316_set_dai_sysclk 566=========================================freq:12288000 [ 10.744060] es8316_pcm_hw_params 740========================================= [ 10.869443] tegra_machine_codec_get_format 221========================================= [ 10.869558] tegra_machine_codec_get_rate 197========================================= [ 10.951515] tegra_machine_pcm_startup 466========================================= [ 10.951758] tegra_machine_pcm_hw_params 449========================================= [ 10.951778] tegra_machine_dai_init 311 rate:44100========================================= [ 10.951786] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 10.951791] tegra_machine_set_params 253========================================= [ 10.951829] tegra_machine_dai_init===========8316=======es8316-playback===========20211015 362 [ 10.951836] es8316_set_dai_sysclk 566=========================================freq:12288000 [ 11.077447] tegra_machine_codec_get_format 221========================================= [ 11.077562] tegra_machine_codec_get_rate 197========================================= [ 16.186084] tegra_machine_pcm_shutdown 477========================================= [ 16.189870] tegra_machine_pcm_shutdown 477========================================= [ 34.138632] vdd-1v8-sd: disabling [ 34.138642] vdd-1v8-cvb: disabling [ 34.138647] vdd-epb-1v0: disabling [ 34.138652] avdd-cam-2v8: disabling [ 34.138659] vdd_sys_en: disabling [ 54.410742] tegra_machine_pcm_startup 466========================================= [ 54.412556] tegra_machine_pcm_hw_params 449========================================= [ 54.412564] tegra_machine_dai_init 311 rate:44100========================================= [ 54.412571] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 54.412576] tegra_machine_set_params 253========================================= [ 54.412612] tegra_machine_dai_init===========8316=======es8316-playback===========20211015 362 [ 54.412618] es8316_set_dai_sysclk 566=========================================freq:12288000 [ 54.414334] es8316_pcm_hw_params 740========================================= [ 77.884232] tegra_machine_pcm_startup 466========================================= [ 77.884992] tegra_machine_pcm_hw_params 449========================================= [ 77.885000] tegra_machine_dai_init 311 rate:44100========================================= [ 77.885008] pll_a_out0 = 45158400 Hz, aud_mclk = 11289600 Hz, sample rate = 44100 Hz [ 77.885012] tegra_machine_set_params 253========================================= [ 77.885049] tegra_machine_dai_init===========8316=======es8316-playback===========20211015 362 [ 77.885055] es8316_set_dai_sysclk 566=========================================freq:12288000 [ 87.899592] tegra_machine_pcm_shutdown 477========================================= [ 261.463076] FAN rising trip_level:2 cur_temp:60150 trip_temps[3]:68000 [ 312.435085] tegra_machine_pcm_shutdown 477=========================================