[0000.207] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.215] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.220] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.225] I> bit @ 0xd480000
[0000.228] I> BR-BCT relocated to 0xd7020000
[0000.232] I> Boot-device: eMMC
[0000.236] I> sdmmc bdev is already initialized
[0000.240] I> pmic: reset reason (nverc)        : 0x40
[0000.245] I> Reading GPT from 512 for device 00000003
[0000.250] I> Reading GPT from 8388096 for device 00000003
[0000.258] I> Found 13 partitions in 00000003 device
[0000.262] I> Reading GPT from 512 for device 00010003
[0000.269] I> Found 29 partitions in 00010003 device
[0000.274] W> No valid slot number is found in scratch register
[0000.280] W> Return default slot: _a
[0000.283] I> A/B: bin_type (16) slot 0
[0000.287] I> Loading partition bpmp-fw at 0xd7800000
[0000.292] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.297] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.312] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.318] W> No valid slot number is found in scratch register
[0000.324] W> Return default slot: _a
[0000.327] I> A/B: bin_type (17) slot 0
[0000.331] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.336] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.341] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.355] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.533] I> BPMP-FW load address = 0xd7800000
[0000.537] I> BPMP-FW DTB load address = 0x5018e200
[0000.542] I> Loading SCE-FW ...
[0000.545] W> No valid slot number is found in scratch register
[0000.551] W> Return default slot: _a
[0000.554] I> A/B: bin_type (12) slot 0
[0000.558] I> Loading partition sce-fw at 0xd7300000
[0000.563] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.568] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.577] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.582] I> Init SCE
[0000.585] I> Copy BTCM section
[0000.588] W> No valid slot number is found in scratch register
[0000.593] W> Return default slot: _a
[0000.597] I> A/B: bin_type (13) slot 0
[0000.600] I> Loading partition cpu-bootloader at 0x96000000
[0000.606] I> Reading two headers - addr:0x96000000 blocks:1
[0000.611] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.622] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.628] W> No valid slot number is found in scratch register
[0000.634] W> Return default slot: _a
[0000.637] I> A/B: bin_type (20) slot 0
[0000.641] I> Loading partition bootloader-dtb at 0x8520f400
[0000.646] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.652] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.663] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.669] I> MB2-params(VA) @ 0xd7000000
[0000.673] I> CPUBL-params(VA) @ 0xd7000000
[0000.677] I> CPUBL-params(PA) @ 0x277000000
[0000.681] I> CPU-BL loaded @ PA 0x96000000
[0000.685] I> Loading TOS ...
[0000.687] W> No valid slot number is found in scratch register
[0000.693] W> Return default slot: _a
[0000.697] I> A/B: bin_type (14) slot 0
[0000.700] I> Loading partition secure-os at 0x8530f600
[0000.705] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.711] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.719] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.725] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.732] I> Erasing Monitor @ 0x8530f800
[0000.736] I> Unhalting SCE
[0000.739] I> Primary Memory Start:80000000 Size:70000000
[0000.744] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.751] I> Waypoint2-ACK: 0x52012714
[0000.754] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.996] I> Welcome to Cboot
[0000.999] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0001.004] I> CPU-BL Params @ 0x277000000
[0001.008] I>  0) Base:0x00000000 Size:0x00000000
[0001.012] I>  1) Base:0x277f00000 Size:0x00100000
[0001.016] I>  2) Base:0x277e00000 Size:0x00100000
[0001.021] I>  3) Base:0x277d00000 Size:0x00100000
[0001.026] I>  4) Base:0x277c00000 Size:0x00100000
[0001.030] I>  5) Base:0x277b00000 Size:0x00100000
[0001.035] I>  6) Base:0x277800000 Size:0x00200000
[0001.039] I>  7) Base:0x277400000 Size:0x00400000
[0001.044] I>  8) Base:0x277a00000 Size:0x00100000
[0001.048] I>  9) Base:0x277300000 Size:0x00100000
[0001.053] I> 10) Base:0x276800000 Size:0x00800000
[0001.057] I> 11) Base:0x30000000 Size:0x00040000
[0001.062] I> 12) Base:0xf0000000 Size:0x00100000
[0001.066] I> 13) Base:0x30040000 Size:0x00001000
[0001.070] I> 14) Base:0x30048000 Size:0x00001000
[0001.075] I> 15) Base:0x30049000 Size:0x00001000
[0001.079] I> 16) Base:0x3004a000 Size:0x00001000
[0001.084] I> 17) Base:0x3004b000 Size:0x00001000
[0001.088] I> 18) Base:0x3004c000 Size:0x00001000
[0001.093] I> 19) Base:0x3004d000 Size:0x00001000
[0001.097] I> 20) Base:0x3004e000 Size:0x00001000
[0001.101] I> 21) Base:0x3004f000 Size:0x00001000
[0001.106] I> 22) Base:0x00000000 Size:0x00000000
[0001.110] I> 23) Base:0xf0100000 Size:0x00010000
[0001.115] I> 24) Base:0x00000000 Size:0x00000000
[0001.119] I> 25) Base:0x00000000 Size:0x00000000
[0001.124] I> 26) Base:0x00000000 Size:0x00000000
[0001.128] I> 27) Base:0x00000000 Size:0x00000000
[0001.132] I> 28) Base:0x84400000 Size:0x00400000
[0001.137] I> 29) Base:0x30000000 Size:0x00010000
[0001.141] I> 30) Base:0x278000000 Size:0x08000000
[0001.146] I> 31) Base:0x00000000 Size:0x00000000
[0001.150] I> 32) Base:0x276000000 Size:0x00600000
[0001.155] I> 33) Base:0x80000000 Size:0x70000000
[0001.159] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.164] I> 35) Base:0x00000000 Size:0x00000000
[0001.168] I> 36) Base:0x00000000 Size:0x00000000
[0001.173] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.177] I> 38) Base:0x84000000 Size:0x00400000
[0001.182] I> 39) Base:0x96000000 Size:0x02400000
[0001.186] I> 40) Base:0x85000000 Size:0x01200000
[0001.190] I> 41) Base:0x277000000 Size:0x00280000
[0001.195] I> 42) Base:0x00000000 Size:0x00000000
[0001.199] I> 43) Base:0x00000000 Size:0x00000000
[0001.204] GIC-SPI Target CPU: 4
[0001.207] Interrupts Init done
[0001.210] calling constructors
[0001.214] initializing heap
[0001.216] initializing threads
[0001.220] initializing timers
[0001.223] creating bootstrap completion thread
[0001.228] top of bootstrap2()
[0001.231] CPU: ARM Cortex A57
[0001.234] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.239] initializing platform
[0001.242] I> Boot-device: eMMC
[0001.247] I> sdmmc bdev is already initialized
[0001.251] I> Reading GPT from 512 for device 00000003
[0001.257] I> Reading GPT from 8388096 for device 00000003
[0001.263] I> Found 13 partitions in 00000003 device
[0001.268] I> Reading GPT from 512 for device 00010003
[0001.274] I> Found 29 partitions in 00010003 device
[0001.279] W> opt-in fuse is not set, skip fuse_burning
[0001.284] I> Bl_dtb @0x8520f400
[0001.286] I> gpio framework initialized
[0001.290] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.298] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.305] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.314] E> i2c dev write failed
[0001.317] E> tca9539_device_init: failed to write polar reg
[0001.322] E> tegrabl_tca9539_init: failed to init device!
[0001.328] E> GPIO TCA9539 driver init failed
[0001.450] I> decompressor handler not found
[0001.457] I> fixed regulator driver initialized
[0001.494] I> register 'maxim' power off handle
[0001.500] I> virtual i2c enabled
[0001.503] I> registered 'maxim,max77620' pmic
[0001.507] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.518] I> Find /i2c@c250000's alias i2c7
[0001.522] I> Reading eeprom i2c=7 address=0x50
[0001.554] I> Device at /i2c@c250000:0x50
[0001.557] I> Reading eeprom i2c=7 address=0x57
[0001.562] E> i2c dev read failed
[0001.566] E> eeprom: Failed to read I2C slave device
[0001.570] I> Eeprom read failed 0x1a89800d
[0001.575] I> Find /i2c@c240000's alias i2c1
[0001.579] I> Reading eeprom i2c=1 address=0x51
[0001.586] E> i2c dev read failed
[0001.589] E> eeprom: Retry to read I2C slave device.
[0001.595] E> i2c dev read failed
[0001.598] E> eeprom: Failed to read I2C slave device
[0001.603] I> Eeprom read failed 0x1a89800d
[0001.607] I> Find /i2c@3160000's alias i2c0
[0001.611] I> Reading eeprom i2c=0 address=0x50
[0001.617] E> i2c dev read failed
[0001.620] E> eeprom: Failed to read I2C slave device
[0001.624] I> Eeprom read failed 0x1a89800d
[0001.629] I> Find /i2c@3180000's alias i2c2
[0001.633] I> Reading eeprom i2c=2 address=0x54
[0001.637] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.642] C> GPIO driver for chip_id 0x2 could not be found
[0001.648] E> cam_eeprom_read: Can't get gpio driver
[0001.652] I> Eeprom read failed 0x2693400d
[0001.656] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.661] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.676] I> found one nvdisp nodes at offset = 104564
[0001.681] I> found one nvdisp nodes at offset = 105480
[0001.686] I> found one nvdisp nodes at offset = 106284
[0001.691] I> no valid display unit config found in dtb
[0001.696] W> display init failed
[0001.699] initializing target
[0001.702] calling apps_init()
[0001.705] starting app android_boot_app
[0001.710] I> Gpio keyboard init success
[0001.713] I> Kernel type = Normal
[0001.716] I> Loading kernel/boot.img from storage ...
[0001.721] W> No valid slot number is found in scratch register
[0001.727] W> Return default slot: _a
[0001.730] I> A/B: bin_type (0) slot 0
[0001.734] I> Loading partition kernel at 0xa8000000
[0002.525] I> tegrabl_auth_payload: partition kernel (bin_type 0)
[0002.533] W> No valid slot number is found in scratch register
[0002.538] W> Return default slot: _a
[0002.542] I> A/B: bin_type (1) slot 0
[0002.545] I> Loading partition kernel-dtb at 0x92000000
[0002.557] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1)
[0002.564] C> ERROR: Highest Layer Module = 0x1d, Lowest Layer Module = 0x40,
Aux Info = 0x0, Reason = 0xd
[00000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.192] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.197] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.202] I> bit @ 0xd480000
[0000.205] I> BR-BCT relocated to 0xd7020000
[0000.209] I> Boot-device: eMMC
[0000.212] I> sdmmc bdev is already initialized
[0000.217] I> pmic: reset reason (nverc)        : 0x0
[0000.221] I> Reading GPT from 512 for device 00000003
[0000.227] I> Reading GPT from 8388096 for device 00000003
[0000.234] I> Found 13 partitions in 00000003 device
[0000.239] I> Reading GPT from 512 for device 00010003
[0000.246] I> Found 29 partitions in 00010003 device
[0000.251] W> No valid slot number is found in scratch register
[0000.257] W> Return default slot: _a
[0000.260] I> A/B: bin_type (16) slot 0
[0000.264] I> Loading partition bpmp-fw at 0xd7800000
[0000.269] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.274] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.289] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.295] W> No valid slot number is found in scratch register
[0000.300] W> Return default slot: _a
[0000.304] I> A/B: bin_type (17) slot 0
[0000.307] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.313] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.318] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.332] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.511] I> BPMP-FW load address = 0xd7800000
[0000.515] I> BPMP-FW DTB load address = 0x5018e200
[0000.520] I> Loading SCE-FW ...
[0000.523] W> No valid slot number is found in scratch register
[0000.529] W> Return default slot: _a
[0000.532] I> A/B: bin_type (12) slot 0
[0000.536] I> Loading partition sce-fw at 0xd7300000
[0000.540] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.546] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.555] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.560] I> Init SCE
[0000.563] I> Copy BTCM section
[0000.565] W> No valid slot number is found in scratch register
[0000.571] W> Return default slot: _a
[0000.575] I> A/B: bin_type (13) slot 0
[0000.578] I> Loading partition cpu-bootloader at 0x96000000
[0000.584] I> Reading two headers - addr:0x96000000 blocks:1
[0000.589] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.600] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.606] W> No valid slot number is found in scratch register
[0000.612] W> Return default slot: _a
[0000.615] I> A/B: bin_type (20) slot 0
[0000.619] I> Loading partition bootloader-dtb at 0x8520f400
[0000.624] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.630] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.641] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.647] I> MB2-params(VA) @ 0xd7000000
[0000.651] I> CPUBL-params(VA) @ 0xd7000000
[0000.655] I> CPUBL-params(PA) @ 0x277000000
[0000.659] I> CPU-BL loaded @ PA 0x96000000
[0000.663] I> Loading TOS ...
[0000.665] W> No valid slot number is found in scratch register
[0000.671] W> Return default slot: _a
[0000.674] I> A/B: bin_type (14) slot 0
[0000.678] I> Loading partition secure-os at 0x8530f600
[0000.683] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.689] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.697] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.703] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.710] I> Erasing Monitor @ 0x8530f800
[0000.714] I> Unhalting SCE
[0000.717] I> Primary Memory Start:80000000 Size:70000000
[0000.722] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.729] I> Waypoint2-ACK: 0x52012714
[0000.732] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.974] I> Welcome to Cboot
[0000.976] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0000.981] I> CPU-BL Params @ 0x277000000
[0000.985] I>  0) Base:0x00000000 Size:0x00000000
[0000.990] I>  1) Base:0x277f00000 Size:0x00100000
[0000.994] I>  2) Base:0x277e00000 Size:0x00100000
[0000.999] I>  3) Base:0x277d00000 Size:0x00100000
[0001.003] I>  4) Base:0x277c00000 Size:0x00100000
[0001.008] I>  5) Base:0x277b00000 Size:0x00100000
[0001.012] I>  6) Base:0x277800000 Size:0x00200000
[0001.017] I>  7) Base:0x277400000 Size:0x00400000
[0001.021] I>  8) Base:0x277a00000 Size:0x00100000
[0001.026] I>  9) Base:0x277300000 Size:0x00100000
[0001.030] I> 10) Base:0x276800000 Size:0x00800000
[0001.035] I> 11) Base:0x30000000 Size:0x00040000
[0001.039] I> 12) Base:0xf0000000 Size:0x00100000
[0001.044] I> 13) Base:0x30040000 Size:0x00001000
[0001.048] I> 14) Base:0x30048000 Size:0x00001000
[0001.053] I> 15) Base:0x30049000 Size:0x00001000
[0001.057] I> 16) Base:0x3004a000 Size:0x00001000
[0001.061] I> 17) Base:0x3004b000 Size:0x00001000
[0001.066] I> 18) Base:0x3004c000 Size:0x00001000
[0001.070] I> 19) Base:0x3004d000 Size:0x00001000
[0001.075] I> 20) Base:0x3004e000 Size:0x00001000
[0001.079] I> 21) Base:0x3004f000 Size:0x00001000
[0001.084] I> 22) Base:0x00000000 Size:0x00000000
[0001.088] I> 23) Base:0xf0100000 Size:0x00010000
[0001.092] I> 24) Base:0x00000000 Size:0x00000000
[0001.097] I> 25) Base:0x00000000 Size:0x00000000
[0001.101] I> 26) Base:0x00000000 Size:0x00000000
[0001.106] I> 27) Base:0x00000000 Size:0x00000000
[0001.110] I> 28) Base:0x84400000 Size:0x00400000
[0001.115] I> 29) Base:0x30000000 Size:0x00010000
[0001.119] I> 30) Base:0x278000000 Size:0x08000000
[0001.124] I> 31) Base:0x00000000 Size:0x00000000
[0001.128] I> 32) Base:0x276000000 Size:0x00600000
[0001.132] I> 33) Base:0x80000000 Size:0x70000000
[0001.137] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.141] I> 35) Base:0x00000000 Size:0x00000000
[0001.146] I> 36) Base:0x00000000 Size:0x00000000
[0001.150] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.155] I> 38) Base:0x84000000 Size:0x00400000
[0001.159] I> 39) Base:0x96000000 Size:0x02400000
[0001.164] I> 40) Base:0x85000000 Size:0x01200000
[0001.168] I> 41) Base:0x277000000 Size:0x00280000
[0001.173] I> 42) Base:0x00000000 Size:0x00000000
[0001.177] I> 43) Base:0x00000000 Size:0x00000000
[0001.181] GIC-SPI Target CPU: 4
[0001.185] Interrupts Init done
[0001.188] calling constructors
[0001.191] initializing heap
[0001.194] initializing threads
[0001.197] initializing timers
[0001.200] creating bootstrap completion thread
[0001.205] top of bootstrap2()
[0001.208] CPU: ARM Cortex A57
[0001.212] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.217] initializing platform
[0001.220] I> Boot-device: eMMC
[0001.224] I> sdmmc bdev is already initialized
[0001.229] I> Reading GPT from 512 for device 00000003
[0001.234] I> Reading GPT from 8388096 for device 00000003
[0001.241] I> Found 13 partitions in 00000003 device
[0001.246] I> Reading GPT from 512 for device 00010003
[0001.252] I> Found 29 partitions in 00010003 device
[0001.256] W> opt-in fuse is not set, skip fuse_burning
[0001.261] I> Bl_dtb @0x8520f400
[0001.264] I> gpio framework initialized
[0001.268] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.275] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.283] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.292] E> i2c dev write failed
[0001.295] E> tca9539_device_init: failed to write polar reg
[0001.300] E> tegrabl_tca9539_init: failed to init device!
[0001.305] E> GPIO TCA9539 driver init failed
[0001.428] I> decompressor handler not found
[0001.435] I> fixed regulator driver initialized
[0001.472] I> register 'maxim' power off handle
[0001.477] I> virtual i2c enabled
[0001.481] I> registered 'maxim,max77620' pmic
[0001.485] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.496] I> Find /i2c@c250000's alias i2c7
[0001.500] I> Reading eeprom i2c=7 address=0x50
[0001.531] I> Device at /i2c@c250000:0x50
[0001.535] I> Reading eeprom i2c=7 address=0x57
[0001.540] E> i2c dev read failed
[0001.543] E> eeprom: Failed to read I2C slave device
[0001.548] I> Eeprom read failed 0x1a89800d
[0001.552] I> Find /i2c@c240000's alias i2c1
[0001.556] I> Reading eeprom i2c=1 address=0x51
[0001.564] E> i2c dev read failed
[0001.567] E> eeprom: Retry to read I2C slave device.
[0001.572] E> i2c dev read failed
[0001.576] E> eeprom: Failed to read I2C slave device
[0001.580] I> Eeprom read failed 0x1a89800d
[0001.585] I> Find /i2c@3160000's alias i2c0
[0001.589] I> Reading eeprom i2c=0 address=0x50
[0001.594] E> i2c dev read failed
[0001.597] E> eeprom: Failed to read I2C slave device
[0001.602] I> Eeprom read failed 0x1a89800d
[0001.607] I> Find /i2c@3180000's alias i2c2
[0001.611] I> Reading eeprom i2c=2 address=0x54
[0001.615] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.620] C> GPIO driver for chip_id 0x2 could not be found
[0001.625] E> cam_eeprom_read: Can't get gpio driver
[0001.630] I> Eeprom read failed 0x2693400d
[0001.634] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.639] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.654] I> found one nvdisp nodes at offset = 104564
[0001.659] I> found one nvdisp nodes at offset = 105480
[0001.664] I> found one nvdisp nodes at offset = 106284
[0001.669] I> no valid display unit config found in dtb
[0001.674] W> display init failed
[0001.677] initializing target
[0001.680] calling apps_init()
[0001.683] starting app android_boot_app
[0001.687] I> Gpio keyboard init success
[0001.691] I> Kernel type = Normal
[0001.694] I> Loading kernel/boot.img from storage ...
[0001.699] W> No valid slot number is found in scratch register
[0001.704] W> Return default slot: _a
[0001.708] I> A/B: bin_type (0) slot 0
[0001.711] I> Loading partition kernel at 0xa8000000
[0002.503] I> tegrabl_auth_payload: partition kernel (bin_type 0)
[0002.510] W> No valid slot number is found in scratch register
[0002.516] W> Return default slot: _a
[0002.519] I> A/B: bin_type (1) slot 0
[0002.523] I> Loading partition kernel-dtb at 0x92000000
[0002.535] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1)
[0002.541] C> ERROR: Highest Layer Module = 0x1d, Lowest Layer Module = 0x40,
Aux Info = 0x0, Reason = 0xd
[00000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.192] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.197] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.202] I> bit @ 0xd480000
[0000.205] I> BR-BCT relocated to 0xd7020000
[0000.209] I> Boot-device: eMMC
[0000.212] I> sdmmc bdev is already initialized
[0000.217] I> pmic: reset reason (nverc)        : 0x0
[0000.221] I> Reading GPT from 512 for device 00000003
[0000.227] I> Reading GPT from 8388096 for device 00000003
[0000.234] I> Found 13 partitions in 00000003 device
[0000.239] I> Reading GPT from 512 for device 00010003
[0000.246] I> Found 29 partitions in 00010003 device
[0000.251] W> No valid slot number is found in scratch register
[0000.257] W> Return default slot: _a
[0000.260] I> A/B: bin_type (16) slot 0
[0000.264] I> Loading partition bpmp-fw at 0xd7800000
[0000.269] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.274] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.289] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.295] W> No valid slot number is found in scratch register
[0000.300] W> Return default slot: _a
[0000.304] I> A/B: bin_type (17) slot 0
[0000.307] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.313] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.318] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.332] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.510] I> BPMP-FW load address = 0xd7800000
[0000.514] I> BPMP-FW DTB load address = 0x5018e200
[0000.519] I> Loading SCE-FW ...
[0000.522] W> No valid slot number is found in scratch register
[0000.528] W> Return default slot: _a
[0000.531] I> A/B: bin_type (12) slot 0
[0000.535] I> Loading partition sce-fw at 0xd7300000
[0000.539] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.545] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.554] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.559] I> Init SCE
[0000.561] I> Copy BTCM section
[0000.564] W> No valid slot number is found in scratch register
[0000.570] W> Return default slot: _a
[0000.573] I> A/B: bin_type (13) slot 0
[0000.577] I> Loading partition cpu-bootloader at 0x96000000
[0000.583] I> Reading two headers - addr:0x96000000 blocks:1
[0000.588] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.599] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.605] W> No valid slot number is found in scratch register
[0000.611] W> Return default slot: _a
[0000.614] I> A/B: bin_type (20) slot 0
[0000.618] I> Loading partition bootloader-dtb at 0x8520f400
[0000.623] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.629] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.640] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.646] I> MB2-params(VA) @ 0xd7000000
[0000.649] I> CPUBL-params(VA) @ 0xd7000000
[0000.654] I> CPUBL-params(PA) @ 0x277000000
[0000.658] I> CPU-BL loaded @ PA 0x96000000
[0000.662] I> Loading TOS ...
[0000.664] W> No valid slot number is found in scratch register
[0000.670] W> Return default slot: _a
[0000.673] I> A/B: bin_type (14) slot 0
[0000.677] I> Loading partition secure-os at 0x8530f600
[0000.682] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.688] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.696] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.702] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.709] I> Erasing Monitor @ 0x8530f800
[0000.713] I> Unhalting SCE
[0000.716] I> Primary Memory Start:80000000 Size:70000000
[0000.721] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.728] I> Waypoint2-ACK: 0x52012714
[0000.731] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.973] I> Welcome to Cboot
[0000.975] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0000.980] I> CPU-BL Params @ 0x277000000
[0000.984] I>  0) Base:0x00000000 Size:0x00000000
[0000.989] I>  1) Base:0x277f00000 Size:0x00100000
[0000.993] I>  2) Base:0x277e00000 Size:0x00100000
[0000.998] I>  3) Base:0x277d00000 Size:0x00100000
[0001.002] I>  4) Base:0x277c00000 Size:0x00100000
[0001.007] I>  5) Base:0x277b00000 Size:0x00100000
[0001.011] I>  6) Base:0x277800000 Size:0x00200000
[0001.016] I>  7) Base:0x277400000 Size:0x00400000
[0001.020] I>  8) Base:0x277a00000 Size:0x00100000
[0001.025] I>  9) Base:0x277300000 Size:0x00100000
[0001.029] I> 10) Base:0x276800000 Size:0x00800000
[0001.034] I> 11) Base:0x30000000 Size:0x00040000
[0001.038] I> 12) Base:0xf0000000 Size:0x00100000
[0001.043] I> 13) Base:0x30040000 Size:0x00001000
[0001.047] I> 14) Base:0x30048000 Size:0x00001000
[0001.051] I> 15) Base:0x30049000 Size:0x00001000
[0001.056] I> 16) Base:0x3004a000 Size:0x00001000
[0001.060] I> 17) Base:0x3004b000 Size:0x00001000
[0001.065] I> 18) Base:0x3004c000 Size:0x00001000
[0001.069] I> 19) Base:0x3004d000 Size:0x00001000
[0001.074] I> 20) Base:0x3004e000 Size:0x00001000
[0001.078] I> 21) Base:0x3004f000 Size:0x00001000
[0001.082] I> 22) Base:0x00000000 Size:0x00000000
[0001.087] I> 23) Base:0xf0100000 Size:0x00010000
[0001.091] I> 24) Base:0x00000000 Size:0x00000000
[0001.096] I> 25) Base:0x00000000 Size:0x00000000
[0001.100] I> 26) Base:0x00000000 Size:0x00000000
[0001.105] I> 27) Base:0x00000000 Size:0x00000000
[0001.109] I> 28) Base:0x84400000 Size:0x00400000
[0001.114] I> 29) Base:0x30000000 Size:0x00010000
[0001.118] I> 30) Base:0x278000000 Size:0x08000000
[0001.122] I> 31) Base:0x00000000 Size:0x00000000
[0001.127] I> 32) Base:0x276000000 Size:0x00600000
[0001.131] I> 33) Base:0x80000000 Size:0x70000000
[0001.136] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.140] I> 35) Base:0x00000000 Size:0x00000000
[0001.145] I> 36) Base:0x00000000 Size:0x00000000
[0001.149] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.154] I> 38) Base:0x84000000 Size:0x00400000
[0001.158] I> 39) Base:0x96000000 Size:0x02400000
[0001.163] I> 40) Base:0x85000000 Size:0x01200000
[0001.167] I> 41) Base:0x277000000 Size:0x00280000
[0001.172] I> 42) Base:0x00000000 Size:0x00000000
[0001.176] I> 43) Base:0x00000000 Size:0x00000000
[0001.180] GIC-SPI Target CPU: 4
[0001.184] Interrupts Init done
[0001.187] calling constructors
[0001.190] initializing heap
[0001.193] initializing threads
[0001.196] initializing timers
[0001.199] creating bootstrap completion thread
[0001.204] top of bootstrap2()
[0001.207] CPU: ARM Cortex A57
[0001.210] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.216] initializing platform
[0001.219] I> Boot-device: eMMC
[0001.223] I> sdmmc bdev is already initialized
[0001.227] I> Reading GPT from 512 for device 00000003
[0001.233] I> Reading GPT from 8388096 for device 00000003
[0001.240] I> Found 13 partitions in 00000003 device
[0001.244] I> Reading GPT from 512 for device 00010003
[0001.250] I> Found 29 partitions in 00010003 device
[0001.255] W> opt-in fuse is not set, skip fuse_burning
[0001.260] I> Bl_dtb @0x8520f400
[0001.263] I> gpio framework initialized
[0001.267] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.274] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.282] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.290] E> i2c dev write failed
[0001.294] E> tca9539_device_init: failed to write polar reg
[0001.299] E> tegrabl_tca9539_init: failed to init device!
[0001.304] E> GPIO TCA9539 driver init failed
[0001.427] I> decompressor handler not found
[0001.434] I> fixed regulator driver initialized
[0001.470] I> register 'maxim' power off handle
[0001.476] I> virtual i2c enabled
[0001.479] I> registered 'maxim,max77620' pmic
[0001.483] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.494] I> Find /i2c@c250000's alias i2c7
[0001.498] I> Reading eeprom i2c=7 address=0x50
[0001.530] I> Device at /i2c@c250000:0x50
[0001.534] I> Reading eeprom i2c=7 address=0x57
[0001.539] E> i2c dev read failed
[0001.542] E> eeprom: Failed to read I2C slave device
[0001.547] I> Eeprom read failed 0x1a89800d
[0001.551] I> Find /i2c@c240000's alias i2c1
[0001.555] I> Reading eeprom i2c=1 address=0x51
[0001.562] E> i2c dev read failed
[0001.566] E> eeprom: Retry to read I2C slave device.
[0001.571] E> i2c dev read failed
[0001.574] E> eeprom: Failed to read I2C slave device
[0001.579] I> Eeprom read failed 0x1a89800d
[0001.584] I> Find /i2c@3160000's alias i2c0
[0001.588] I> Reading eeprom i2c=0 address=0x50
[0001.593] E> i2c dev read failed
[0001.596] E> eeprom: Failed to read I2C slave device
[0001.601] I> Eeprom read failed 0x1a89800d
[0001.605] I> Find /i2c@3180000's alias i2c2
[0001.609] I> Reading eeprom i2c=2 address=0x54
[0001.614] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.619] C> GPIO driver for chip_id 0x2 could not be found
[0001.624] E> cam_eeprom_read: Can't get gpio driver
[0001.629] I> Eeprom read failed 0x2693400d
[0001.633] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.638] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.652] I> found one nvdisp nodes at offset = 104564
[0001.657] I> found one nvdisp nodes at offset = 105480
[0001.662] I> found one nvdisp nodes at offset = 106284
[0001.667] I> no valid display unit config found in dtb
[0001.672] W> display init failed
[0001.675] initializing target
[0001.679] calling apps_init()
[0001.682] starting app android_boot_app
[0001.686] I> Gpio keyboard init success
[0001.690] I> Kernel type = Normal
[0001.693] I> Loading kernel/boot.img from storage ...
[0001.698] W> No valid slot number is found in scratch register
[0001.703] W> Return default slot: _a
[0001.707] I> A/B: bin_type (0) slot 0
[0001.710] I> Loading partition kernel at 0xa8000000
[0000.186] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.195] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.199] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.204] I> bit @ 0xd480000
[0000.207] I> BR-BCT relocated to 0xd7020000
[0000.211] I> Boot-device: eMMC
[0000.215] I> sdmmc bdev is already initialized
[0000.219] I> pmic: reset reason (nverc)        : 0x40
[0000.224] I> Reading GPT from 512 for device 00000003
[0000.230] I> Reading GPT from 8388096 for device 00000003
[0000.237] I> Found 13 partitions in 00000003 device
[0000.242] I> Reading GPT from 512 for device 00010003
[0000.248] I> Found 29 partitions in 00010003 device
[0000.254] W> No valid slot number is found in scratch register
[0000.259] W> Return default slot: _a
[0000.263] I> A/B: bin_type (16) slot 0
[0000.266] I> Loading partition bpmp-fw at 0xd7800000
[0000.271] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.277] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.292] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.297] W> No valid slot number is found in scratch register
[0000.303] W> Return default slot: _a
[0000.306] I> A/B: bin_type (17) slot 0
[0000.310] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.315] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.321] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.334] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.512] I> BPMP-FW load address = 0xd7800000
[0000.517] I> BPMP-FW DTB load address = 0x5018e200
[0000.521] I> Loading SCE-FW ...
[0000.524] W> No valid slot number is found in scratch register
[0000.530] W> Return default slot: _a
[0000.533] I> A/B: bin_type (12) slot 0
[0000.537] I> Loading partition sce-fw at 0xd7300000
[0000.542] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.547] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.556] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.562] I> Init SCE
[0000.564] I> Copy BTCM section
[0000.567] W> No valid slot number is found in scratch register
[0000.573] W> Return default slot: _a
[0000.576] I> A/B: bin_type (13) slot 0
[0000.580] I> Loading partition cpu-bootloader at 0x96000000
[0000.585] I> Reading two headers - addr:0x96000000 blocks:1
[0000.590] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.602] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.608] W> No valid slot number is found in scratch register
[0000.613] W> Return default slot: _a
[0000.617] I> A/B: bin_type (20) slot 0
[0000.620] I> Loading partition bootloader-dtb at 0x8520f400
[0000.626] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.631] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.643] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.648] I> MB2-params(VA) @ 0xd7000000
[0000.652] I> CPUBL-params(VA) @ 0xd7000000
[0000.656] I> CPUBL-params(PA) @ 0x277000000
[0000.660] I> CPU-BL loaded @ PA 0x96000000
[0000.664] I> Loading TOS ...
[0000.667] W> No valid slot number is found in scratch register
[0000.672] W> Return default slot: _a
[0000.676] I> A/B: bin_type (14) slot 0
[0000.680] I> Loading partition secure-os at 0x8530f600
[0000.685] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.690] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.698] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.704] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.711] I> Erasing Monitor @ 0x8530f800
[0000.716] I> Unhalting SCE
[0000.718] I> Primary Memory Start:80000000 Size:70000000
[0000.724] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.730] I> Waypoint2-ACK: 0x52012714
[0000.734] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.975] I> Welcome to Cboot
[0000.978] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0000.983] I> CPU-BL Params @ 0x277000000
[0000.987] I>  0) Base:0x00000000 Size:0x00000000
[0000.991] I>  1) Base:0x277f00000 Size:0x00100000
[0000.996] I>  2) Base:0x277e00000 Size:0x00100000
[0001.000] I>  3) Base:0x277d00000 Size:0x00100000
[0001.005] I>  4) Base:0x277c00000 Size:0x00100000
[0001.009] I>  5) Base:0x277b00000 Size:0x00100000
[0001.014] I>  6) Base:0x277800000 Size:0x00200000
[0001.018] I>  7) Base:0x277400000 Size:0x00400000
[0001.023] I>  8) Base:0x277a00000 Size:0x00100000
[0001.027] I>  9) Base:0x277300000 Size:0x00100000
[0001.032] I> 10) Base:0x276800000 Size:0x00800000
[0001.036] I> 11) Base:0x30000000 Size:0x00040000
[0001.041] I> 12) Base:0xf0000000 Size:0x00100000
[0001.045] I> 13) Base:0x30040000 Size:0x00001000
[0001.050] I> 14) Base:0x30048000 Size:0x00001000
[0001.054] I> 15) Base:0x30049000 Size:0x00001000
[0001.058] I> 16) Base:0x3004a000 Size:0x00001000
[0001.063] I> 17) Base:0x3004b000 Size:0x00001000
[0001.067] I> 18) Base:0x3004c000 Size:0x00001000
[0001.072] I> 19) Base:0x3004d000 Size:0x00001000
[0001.076] I> 20) Base:0x3004e000 Size:0x00001000
[0001.081] I> 21) Base:0x3004f000 Size:0x00001000
[0001.085] I> 22) Base:0x00000000 Size:0x00000000
[0001.089] I> 23) Base:0xf0100000 Size:0x00010000
[0001.094] I> 24) Base:0x00000000 Size:0x00000000
[0001.098] I> 25) Base:0x00000000 Size:0x00000000
[0001.103] I> 26) Base:0x00000000 Size:0x00000000
[0001.107] I> 27) Base:0x00000000 Size:0x00000000
[0001.112] I> 28) Base:0x84400000 Size:0x00400000
[0001.116] I> 29) Base:0x30000000 Size:0x00010000
[0001.121] I> 30) Base:0x278000000 Size:0x08000000
[0001.125] I> 31) Base:0x00000000 Size:0x00000000
[0001.129] I> 32) Base:0x276000000 Size:0x00600000
[0001.134] I> 33) Base:0x80000000 Size:0x70000000
[0001.138] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.143] I> 35) Base:0x00000000 Size:0x00000000
[0001.147] I> 36) Base:0x00000000 Size:0x00000000
[0001.152] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.156] I> 38) Base:0x84000000 Size:0x00400000
[0001.161] I> 39) Base:0x96000000 Size:0x02400000
[0001.165] I> 40) Base:0x85000000 Size:0x01200000
[0001.170] I> 41) Base:0x277000000 Size:0x00280000
[0001.174] I> 42) Base:0x00000000 Size:0x00000000
[0001.179] I> 43) Base:0x00000000 Size:0x00000000
[0001.183] GIC-SPI Target CPU: 4
[0001.186] Interrupts Init done
[0001.190] calling constructors
[0001.193] initializing heap
[0001.195] initializing threads
[0001.199] initializing timers
[0001.202] creating bootstrap completion thread
[0001.207] top of bootstrap2()
[0001.210] CPU: ARM Cortex A57
[0001.213] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.218] initializing platform
[0001.222] I> Boot-device: eMMC
[0001.226] I> sdmmc bdev is already initialized
[0001.230] I> Reading GPT from 512 for device 00000003
[0001.236] I> Reading GPT from 8388096 for device 00000003
[0001.242] I> Found 13 partitions in 00000003 device
[0001.247] I> Reading GPT from 512 for device 00010003
[0001.253] I> Found 29 partitions in 00010003 device
[0001.258] W> opt-in fuse is not set, skip fuse_burning
[0001.263] I> Bl_dtb @0x8520f400
[0001.266] I> gpio framework initialized
[0001.269] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.277] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.284] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.293] E> i2c dev write failed
[0001.296] E> tca9539_device_init: failed to write polar reg
[0001.302] E> tegrabl_tca9539_init: failed to init device!
[0001.307] E> GPIO TCA9539 driver init failed
[0001.429] I> decompressor handler not found
[0001.436] I> fixed regulator driver initialized
[0001.473] I> register 'maxim' power off handle
[0001.479] I> virtual i2c enabled
[0001.482] I> registered 'maxim,max77620' pmic
[0001.486] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.497] I> Find /i2c@c250000's alias i2c7
[0001.501] I> Reading eeprom i2c=7 address=0x50
[0001.532] I> Device at /i2c@c250000:0x50
[0001.536] I> Reading eeprom i2c=7 address=0x57
[0001.541] E> i2c dev read failed
[0001.544] E> eeprom: Failed to read I2C slave device
[0001.549] I> Eeprom read failed 0x1a89800d
[0001.554] I> Find /i2c@c240000's alias i2c1
[0001.558] I> Reading eeprom i2c=1 address=0x51
[0001.565] E> i2c dev read failed
[0001.568] E> eeprom: Retry to read I2C slave device.
[0001.574] E> i2c dev read failed
[0001.577] E> eeprom: Failed to read I2C slave device
[0001.581] I> Eeprom read failed 0x1a89800d
[0001.586] I> Find /i2c@3160000's alias i2c0
[0001.590] I> Reading eeprom i2c=0 address=0x50
[0001.595] E> i2c dev read failed
[0001.598] E> eeprom: Failed to read I2C slave device
[0001.603] I> Eeprom read failed 0x1a89800d
[0001.608] I> Find /i2c@3180000's alias i2c2
[0001.612] I> Reading eeprom i2c=2 address=0x54
[0001.616] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.621] C> GPIO driver for chip_id 0x2 could not be found
[0001.626] E> cam_eeprom_read: Can't get gpio driver
[0001.631] I> Eeprom read failed 0x2693400d
[0001.635] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.640] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.655] I> found one nvdisp nodes at offset = 104564
[0001.660] I> found one nvdisp nodes at offset = 105480
[0001.665] I> found one nvdisp nodes at offset = 106284
[0001.670] I> no valid display unit config found in dtb
[0001.675] W> display init failed
[0001.678] initializing target
[0001.681] calling apps_init()
[0001.684] starting app android_boot_app
[0001.688] I> Gpio keyboard init success
[0001.692] I> Kernel type = Normal
[0001.695] I> Loading kernel/boot.img from storage ...
[0001.700] W> No valid slot number is found in scratch register
[0001.706] W> Return default slot: _a
[0001.709] I> A/B: bin_type (0) slot 0
[0001.713] I> Loading partition kernel at 0xa8000000
[0002.504] I> tegrabl_auth_payload: partition kernel (bin_type 0)
[0002.512] W> No valid slot number is found in scratch register
[0002.517] W> Return default slot: _a
[0002.521] I> A/B: bin_type (1) slot 0
[0002.524] I> Loading partition kernel-dtb at 0x92000000
[0002.536] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1)
[0002.542] C> ERROR: Highest Layer Module = 0x1d, Lowest Layer Module = 0x40,
Aux Info = 0x0, Reason = 0xd
[00000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.192] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.197] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.202] I> bit @ 0xd480000
[0000.205] I> BR-BCT relocated to 0xd7020000
[0000.209] I> Boot-device: eMMC
[0000.212] I> sdmmc bdev is already initialized
[0000.217] I> pmic: reset reason (nverc)        : 0x0
[0000.221] I> Reading GPT from 512 for device 00000003
[0000.227] I> Reading GPT from 8388096 for device 00000003
[0000.234] I> Found 13 partitions in 00000003 device
[0000.239] I> Reading GPT from 512 for device 00010003
[0000.246] I> Found 29 partitions in 00010003 device
[0000.251] W> No valid slot number is found in scratch register
[0000.257] W> Return default slot: _a
[0000.260] I> A/B: bin_type (16) slot 0
[0000.264] I> Loading partition bpmp-fw at 0xd7800000
[0000.269] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.274] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.289] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.295] W> No valid slot number is found in scratch register
[0000.300] W> Return default slot: _a
[0000.304] I> A/B: bin_type (17) slot 0
[0000.307] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.313] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.318] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.332] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.511] I> BPMP-FW load address = 0xd7800000
[0000.515] I> BPMP-FW DTB load address = 0x5018e200
[0000.520] I> Loading SCE-FW ...
[0000.523] W> No valid slot number is found in scratch register
[0000.529] W> Return default slot: _a
[0000.532] I> A/B: bin_type (12) slot 0
[0000.536] I> Loading partition sce-fw at 0xd7300000
[0000.540] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.546] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.555] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.560] I> Init SCE
[0000.563] I> Copy BTCM section
[0000.565] W> No valid slot number is found in scratch register
[0000.571] W> Return default slot: _a
[0000.575] I> A/B: bin_type (13) slot 0
[0000.578] I> Loading partition cpu-bootloader at 0x96000000
[0000.584] I> Reading two headers - addr:0x96000000 blocks:1
[0000.589] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.600] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.606] W> No valid slot number is found in scratch register
[0000.612] W> Return default slot: _a
[0000.615] I> A/B: bin_type (20) slot 0
[0000.619] I> Loading partition bootloader-dtb at 0x8520f400
[0000.624] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.630] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.641] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.647] I> MB2-params(VA) @ 0xd7000000
[0000.651] I> CPUBL-params(VA) @ 0xd7000000
[0000.655] I> CPUBL-params(PA) @ 0x277000000
[0000.659] I> CPU-BL loaded @ PA 0x96000000
[0000.663] I> Loading TOS ...
[0000.665] W> No valid slot number is found in scratch register
[0000.671] W> Return default slot: _a
[0000.674] I> A/B: bin_type (14) slot 0
[0000.678] I> Loading partition secure-os at 0x8530f600
[0000.683] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.689] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.697] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.703] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.710] I> Erasing Monitor @ 0x8530f800
[0000.714] I> Unhalting SCE
[0000.717] I> Primary Memory Start:80000000 Size:70000000
[0000.722] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.729] I> Waypoint2-ACK: 0x52012714
[0000.732] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.974] I> Welcome to Cboot
[0000.976] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0000.981] I> CPU-BL Params @ 0x277000000
[0000.985] I>  0) Base:0x00000000 Size:0x00000000
[0000.990] I>  1) Base:0x277f00000 Size:0x00100000
[0000.994] I>  2) Base:0x277e00000 Size:0x00100000
[0000.999] I>  3) Base:0x277d00000 Size:0x00100000
[0001.003] I>  4) Base:0x277c00000 Size:0x00100000
[0001.008] I>  5) Base:0x277b00000 Size:0x00100000
[0001.012] I>  6) Base:0x277800000 Size:0x00200000
[0001.017] I>  7) Base:0x277400000 Size:0x00400000
[0001.021] I>  8) Base:0x277a00000 Size:0x00100000
[0001.026] I>  9) Base:0x277300000 Size:0x00100000
[0001.030] I> 10) Base:0x276800000 Size:0x00800000
[0001.035] I> 11) Base:0x30000000 Size:0x00040000
[0001.039] I> 12) Base:0xf0000000 Size:0x00100000
[0001.044] I> 13) Base:0x30040000 Size:0x00001000
[0001.048] I> 14) Base:0x30048000 Size:0x00001000
[0001.052] I> 15) Base:0x30049000 Size:0x00001000
[0001.057] I> 16) Base:0x3004a000 Size:0x00001000
[0001.061] I> 17) Base:0x3004b000 Size:0x00001000
[0001.066] I> 18) Base:0x3004c000 Size:0x00001000
[0001.070] I> 19) Base:0x3004d000 Size:0x00001000
[0001.075] I> 20) Base:0x3004e000 Size:0x00001000
[0001.079] I> 21) Base:0x3004f000 Size:0x00001000
[0001.083] I> 22) Base:0x00000000 Size:0x00000000
[0001.088] I> 23) Base:0xf0100000 Size:0x00010000
[0001.092] I> 24) Base:0x00000000 Size:0x00000000
[0001.097] I> 25) Base:0x00000000 Size:0x00000000
[0001.101] I> 26) Base:0x00000000 Size:0x00000000
[0001.106] I> 27) Base:0x00000000 Size:0x00000000
[0001.110] I> 28) Base:0x84400000 Size:0x00400000
[0001.114] I> 29) Base:0x30000000 Size:0x00010000
[0001.119] I> 30) Base:0x278000000 Size:0x08000000
[0001.123] I> 31) Base:0x00000000 Size:0x00000000
[0001.128] I> 32) Base:0x276000000 Size:0x00600000
[0001.132] I> 33) Base:0x80000000 Size:0x70000000
[0001.137] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.141] I> 35) Base:0x00000000 Size:0x00000000
[0001.146] I> 36) Base:0x00000000 Size:0x00000000
[0001.150] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.155] I> 38) Base:0x84000000 Size:0x00400000
[0001.159] I> 39) Base:0x96000000 Size:0x02400000
[0001.164] I> 40) Base:0x85000000 Size:0x01200000
[0001.168] I> 41) Base:0x277000000 Size:0x00280000
[0001.173] I> 42) Base:0x00000000 Size:0x00000000
[0001.177] I> 43) Base:0x00000000 Size:0x00000000
[0001.181] GIC-SPI Target CPU: 4
[0001.185] Interrupts Init done
[0001.188] calling constructors
[0001.191] initializing heap
[0001.194] initializing threads
[0001.197] initializing timers
[0001.200] creating bootstrap completion thread
[0001.205] top of bootstrap2()
[0001.208] CPU: ARM Cortex A57
[0001.211] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.217] initializing platform
[0001.220] I> Boot-device: eMMC
[0001.224] I> sdmmc bdev is already initialized
[0001.228] I> Reading GPT from 512 for device 00000003
[0001.234] I> Reading GPT from 8388096 for device 00000003
[0001.241] I> Found 13 partitions in 00000003 device
[0001.246] I> Reading GPT from 512 for device 00010003
[0001.252] I> Found 29 partitions in 00010003 device
[0001.256] W> opt-in fuse is not set, skip fuse_burning
[0001.261] I> Bl_dtb @0x8520f400
[0001.264] I> gpio framework initialized
[0001.268] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.275] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.283] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.292] E> i2c dev write failed
[0001.295] E> tca9539_device_init: failed to write polar reg
[0001.300] E> tegrabl_tca9539_init: failed to init device!
[0001.305] E> GPIO TCA9539 driver init failed
[0001.428] I> decompressor handler not found
[0001.435] I> fixed regulator driver initialized
[0001.471] I> register 'maxim' power off handle
[0001.477] I> virtual i2c enabled
[0001.480] I> registered 'maxim,max77620' pmic
[0001.485] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.495] I> Find /i2c@c250000's alias i2c7
[0001.499] I> Reading eeprom i2c=7 address=0x50
[0001.531] I> Device at /i2c@c250000:0x50
[0001.534] I> Reading eeprom i2c=7 address=0x57
[0001.540] E> i2c dev read failed
[0001.543] E> eeprom: Failed to read I2C slave device
[0001.547] I> Eeprom read failed 0x1a89800d
[0001.552] I> Find /i2c@c240000's alias i2c1
[0001.556] I> Reading eeprom i2c=1 address=0x51
[0001.563] E> i2c dev read failed
[0001.566] E> eeprom: Retry to read I2C slave device.
[0001.572] E> i2c dev read failed
[0001.575] E> eeprom: Failed to read I2C slave device
[0001.580] I> Eeprom read failed 0x1a89800d
[0001.584] I> Find /i2c@3160000's alias i2c0
[0001.588] I> Reading eeprom i2c=0 address=0x50
[0001.593] E> i2c dev read failed
[0001.596] E> eeprom: Failed to read I2C slave device
[0001.601] I> Eeprom read failed 0x1a89800d
[0001.606] I> Find /i2c@3180000's alias i2c2
[0001.610] I> Reading eeprom i2c=2 address=0x54
[0001.614] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.619] C> GPIO driver for chip_id 0x2 could not be found
[0001.624] E> cam_eeprom_read: Can't get gpio driver
[0001.629] I> Eeprom read failed 0x2693400d
[0001.633] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.638] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.653] I> found one nvdisp nodes at offset = 104564
[0001.658] I> found one nvdisp nodes at offset = 105480
[0001.663] I> found one nvdisp nodes at offset = 106284
[0001.668] I> no valid display unit config found in dtb
[0001.673] W> display init failed
[0001.676] initializing target
[0001.679] calling apps_init()
[0001.682] starting app android_boot_app
[0001.686] I> Gpio keyboard init success
[0001.690] I> Kernel type = Normal
[0001.693] I> Loading kernel/boot.img from storage ...
[0001.698] W> No valid slot number is found in scratch register
[0001.704] W> Return default slot: _a
[0001.707] I> A/B: bin_type (0) slot 0
[0001.711] I> Loading partition kernel at 0xa8000000
[0002.502] I> tegrabl_auth_payload: partition kernel (bin_type 0)
[0002.510] W> No valid slot number is found in scratch register
[0002.515] W> Return default slot: _a
[0002.519] I> A/B: bin_type (1) slot 0
[0002.522] I> Loading partition kernel-dtb at 0x92000000
[0002.534] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1)
[0002.540] C> ERROR: Highest Layer Module = 0x1d, Lowest Layer Module = 0x40,
Aux Info = 0x0, Reason = 0xd
[0[0000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.192] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.197] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.202] I> bit @ 0xd480000
[0000.205] I> BR-BCT relocated to 0xd7020000
[0000.209] I> Boot-device: eMMC
[0000.212] I> sdmmc bdev is already initialized
[0000.217] I> pmic: reset reason (nverc)        : 0x0
[0000.221] I> Reading GPT from 512 for device 00000003
[0000.227] I> Reading GPT from 8388096 for device 00000003
[0000.234] I> Found 13 partitions in 00000003 device
[0000.239] I> Reading GPT from 512 for device 00010003
[0000.246] I> Found 29 partitions in 00010003 device
[0000.251] W> No valid slot number is found in scratch register
[0000.257] W> Return default slot: _a
[0000.260] I> A/B: bin_type (16) slot 0
[0000.264] I> Loading partition bpmp-fw at 0xd7800000
[0000.269] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.274] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.289] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.295] W> No valid slot number is found in scratch register
[0000.300] W> Return default slot: _a
[0000.304] I> A/B: bin_type (17) slot 0
[0000.307] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.313] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.318] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.332] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.510] I> BPMP-FW load address = 0xd7800000
[0000.514] I> BPMP-FW DTB load address = 0x5018e200
[0000.519] I> Loading SCE-FW ...
[0000.522] W> No valid slot number is found in scratch register
[0000.528] W> Return default slot: _a
[0000.531] I> A/B: bin_type (12) slot 0
[0000.535] I> Loading partition sce-fw at 0xd7300000
[0000.539] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.545] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.554] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.559] I> Init SCE
[0000.561] I> Copy BTCM section
[0000.564] W> No valid slot number is found in scratch register
[0000.570] W> Return default slot: _a
[0000.573] I> A/B: bin_type (13) slot 0
[0000.577] I> Loading partition cpu-bootloader at 0x96000000
[0000.583] I> Reading two headers - addr:0x96000000 blocks:1
[0000.588] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.599] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.605] W> No valid slot number is found in scratch register
[0000.611] W> Return default slot: _a
[0000.614] I> A/B: bin_type (20) slot 0
[0000.618] I> Loading partition bootloader-dtb at 0x8520f400
[0000.623] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.629] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.640] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.646] I> MB2-params(VA) @ 0xd7000000
[0000.650] I> CPUBL-params(VA) @ 0xd7000000
[0000.654] I> CPUBL-params(PA) @ 0x277000000
[0000.658] I> CPU-BL loaded @ PA 0x96000000
[0000.662] I> Loading TOS ...
[0000.664] W> No valid slot number is found in scratch register
[0000.670] W> Return default slot: _a
[0000.673] I> A/B: bin_type (14) slot 0
[0000.677] I> Loading partition secure-os at 0x8530f600
[0000.682] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.688] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.696] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.702] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.709] I> Erasing Monitor @ 0x8530f800
[0000.713] I> Unhalting SCE
[0000.716] I> Primary Memory Start:80000000 Size:70000000
[0000.721] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.728] I> Waypoint2-ACK: 0x52012714
[0000.731] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.972] I> Welcome to Cboot
[0000.975] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0000.980] I> CPU-BL Params @ 0x277000000
[0000.984] I>  0) Base:0x00000000 Size:0x00000000
[0000.988] I>  1) Base:0x277f00000 Size:0x00100000
[0000.993] I>  2) Base:0x277e00000 Size:0x00100000
[0000.997] I>  3) Base:0x277d00000 Size:0x00100000
[0001.002] I>  4) Base:0x277c00000 Size:0x00100000
[0001.007] I>  5) Base:0x277b00000 Size:0x00100000
[0001.011] I>  6) Base:0x277800000 Size:0x00200000
[0001.016] I>  7) Base:0x277400000 Size:0x00400000
[0001.020] I>  8) Base:0x277a00000 Size:0x00100000
[0001.025] I>  9) Base:0x277300000 Size:0x00100000
[0001.029] I> 10) Base:0x276800000 Size:0x00800000
[0001.034] I> 11) Base:0x30000000 Size:0x00040000
[0001.038] I> 12) Base:0xf0000000 Size:0x00100000
[0001.043] I> 13) Base:0x30040000 Size:0x00001000
[0001.047] I> 14) Base:0x30048000 Size:0x00001000
[0001.051] I> 15) Base:0x30049000 Size:0x00001000
[0001.056] I> 16) Base:0x3004a000 Size:0x00001000
[0001.060] I> 17) Base:0x3004b000 Size:0x00001000
[0001.065] I> 18) Base:0x3004c000 Size:0x00001000
[0001.069] I> 19) Base:0x3004d000 Size:0x00001000
[0001.074] I> 20) Base:0x3004e000 Size:0x00001000
[0001.078] I> 21) Base:0x3004f000 Size:0x00001000
[0001.082] I> 22) Base:0x00000000 Size:0x00000000
[0001.087] I> 23) Base:0xf0100000 Size:0x00010000
[0001.091] I> 24) Base:0x00000000 Size:0x00000000
[0001.096] I> 25) Base:0x00000000 Size:0x00000000
[0001.100] I> 26) Base:0x00000000 Size:0x00000000
[0001.105] I> 27) Base:0x00000000 Size:0x00000000
[0001.109] I> 28) Base:0x84400000 Size:0x00400000
[0001.113] I> 29) Base:0x30000000 Size:0x00010000
[0001.118] I> 30) Base:0x278000000 Size:0x08000000
[0001.122] I> 31) Base:0x00000000 Size:0x00000000
[0001.127] I> 32) Base:0x276000000 Size:0x00600000
[0001.131] I> 33) Base:0x80000000 Size:0x70000000
[0001.136] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.140] I> 35) Base:0x00000000 Size:0x00000000
[0001.145] I> 36) Base:0x00000000 Size:0x00000000
[0001.149] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.154] I> 38) Base:0x84000000 Size:0x00400000
[0001.158] I> 39) Base:0x96000000 Size:0x02400000
[0001.163] I> 40) Base:0x85000000 Size:0x01200000
[0001.167] I> 41) Base:0x277000000 Size:0x00280000
[0001.171] I> 42) Base:0x00000000 Size:0x00000000
[0001.176] I> 43) Base:0x00000000 Size:0x00000000
[0001.180] GIC-SPI Target CPU: 4
[0001.184] Interrupts Init done
[0001.187] calling constructors
[0001.190] initializing heap
[0001.193] initializing threads
[0001.196] initializing timers
[0001.199] creating bootstrap completion thread
[0001.204] top of bootstrap2()
[0001.207] CPU: ARM Cortex A57
[0001.210] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.216] initializing platform
[0001.219] I> Boot-device: eMMC
[0001.223] I> sdmmc bdev is already initialized
[0001.227] I> Reading GPT from 512 for device 00000003
[0001.233] I> Reading GPT from 8388096 for device 00000003
[0001.240] I> Found 13 partitions in 00000003 device
[0001.244] I> Reading GPT from 512 for device 00010003
[0001.250] I> Found 29 partitions in 00010003 device
[0001.255] W> opt-in fuse is not set, skip fuse_burning
[0001.260] I> Bl_dtb @0x8520f400
[0001.263] I> gpio framework initialized
[0001.267] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.274] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.281] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.290] E> i2c dev write failed
[0001.294] E> tca9539_device_init: failed to write polar reg
[0001.299] E> tegrabl_tca9539_init: failed to init device!
[0001.304] E> GPIO TCA9539 driver init failed
[0001.427] I> decompressor handler not found
[0001.434] I> fixed regulator driver initialized
[0001.470] I> register 'maxim' power off handle
[0001.476] I> virtual i2c enabled
[0001.479] I> registered 'maxim,max77620' pmic
[0001.484] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.495] I> Find /i2c@c250000's alias i2c7
[0001.499] I> Reading eeprom i2c=7 address=0x50
[0001.530] I> Device at /i2c@c250000:0x50
[0001.534] I> Reading eeprom i2c=7 address=0x57
[0001.539] E> i2c dev read failed
[0001.542] E> eeprom: Failed to read I2C slave device
[0001.547] I> Eeprom read failed 0x1a89800d
[0001.552] I> Find /i2c@c240000's alias i2c1
[0001.556] I> Reading eeprom i2c=1 address=0x51
[0001.563] E> i2c dev read failed
[0001.566] E> eeprom: Retry to read I2C slave device.
[0001.572] E> i2c dev read failed
[0001.575] E> eeprom: Failed to read I2C slave device
[0001.579] I> Eeprom read failed 0x1a89800d
[0001.584] I> Find /i2c@3160000's alias i2c0
[0001.588] I> Reading eeprom i2c=0 address=0x50
[0001.593] E> i2c dev read failed
[0001.596] E> eeprom: Failed to read I2C slave device
[0001.601] I> Eeprom read failed 0x1a89800d
[0001.606] I> Find /i2c@3180000's alias i2c2
[0001.610] I> Reading eeprom i2c=2 address=0x54
[0001.614] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.619] C> GPIO driver for chip_id 0x2 could not be found
[0001.624] E> cam_eeprom_read: Can't get gpio driver
[0001.629] I> Eeprom read failed 0x2693400d
[0001.633] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.638] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.653] I> found one nvdisp nodes at offset = 104564
[0001.658] I> found one nvdisp nodes at offset = 105480
[0001.663] I> found one nvdisp nodes at offset = 106284
[0001.668] I> no valid display unit config found in dtb
[0001.673] W> display init failed
[0001.676] initializing target
[0001.679] calling apps_init()
[0001.682] starting app android_boot_app
[0001.686] I> Gpio keyboard init success
[0001.690] I> Kernel type = Normal
[0001.693] I> Loading kernel/boot.img from storage ...
[0001.698] W> No valid slot number is found in scratch register
[0001.703] W> Return default slot: _a
[0001.707] I> A/B: bin_type (0) slot 0
[0001.710] I> Loading partition kernel at 0xa8000000
[0002.502] I> tegrabl_auth_payload: partition kernel (bin_type 0)
[0002.509] W> No valid slot number is found in scratch register
[0002.515] W> Return default slot: _a
[0002.518] I> A/B: bin_type (1) slot 0
[0002.522] I> Loading partition kernel-dtb at 0x92000000
[0002.534] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1)
[0002.540] C> ERROR: Highest Layer Module = 0x1d, Lowest Layer Module = 0x40,
Aux Info = 0x0, Reason = 0xd
[00000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.192] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.197] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.202] I> bit @ 0xd480000
[0000.205] I> BR-BCT relocated to 0xd7020000
[0000.209] I> Boot-device: eMMC
[0000.212] I> sdmmc bdev is already initialized
[0000.217] I> pmic: reset reason (nverc)        : 0x0
[0000.221] I> Reading GPT from 512 for device 00000003
[0000.227] I> Reading GPT from 8388096 for device 00000003
[0000.234] I> Found 13 partitions in 00000003 device
[0000.239] I> Reading GPT from 512 for device 00010003
[0000.246] I> Found 29 partitions in 00010003 device
[0000.251] W> No valid slot number is found in scratch register
[0000.257] W> Return default slot: _a
[0000.260] I> A/B: bin_type (16) slot 0
[0000.264] I> Loading partition bpmp-fw at 0xd7800000
[0000.269] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.274] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.289] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.295] W> No valid slot number is found in scratch register
[0000.300] W> Return default slot: _a
[0000.304] I> A/B: bin_type (17) slot 0
[0000.307] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.313] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.318] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.332] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.511] I> BPMP-FW load address = 0xd7800000
[0000.515] I> BPMP-FW DTB load address = 0x5018e200
[0000.520] I> Loading SCE-FW ...
[0000.523] W> No valid slot number is found in scratch register
[0000.529] W> Return default slot: _a
[0000.532] I> A/B: bin_type (12) slot 0
[0000.536] I> Loading partition sce-fw at 0xd7300000
[0000.540] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.546] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.555] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.560] I> Init SCE
[0000.563] I> Copy BTCM section
[0000.566] W> No valid slot number is found in scratch register
[0000.571] W> Return default slot: _a
[0000.575] I> A/B: bin_type (13) slot 0
[0000.578] I> Loading partition cpu-bootloader at 0x96000000
[0000.584] I> Reading two headers - addr:0x96000000 blocks:1
[0000.589] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.601] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.606] W> No valid slot number is found in scratch register
[0000.612] W> Return default slot: _a
[0000.615] I> A/B: bin_type (20) slot 0
[0000.619] I> Loading partition bootloader-dtb at 0x8520f400
[0000.624] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.630] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.641] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.647] I> MB2-params(VA) @ 0xd7000000
[0000.651] I> CPUBL-params(VA) @ 0xd7000000
[0000.655] I> CPUBL-params(PA) @ 0x277000000
[0000.659] I> CPU-BL loaded @ PA 0x96000000
[0000.663] I> Loading TOS ...
[0000.665] W> No valid slot number is found in scratch register
[0000.671] W> Return default slot: _a
[0000.675] I> A/B: bin_type (14) slot 0
[0000.678] I> Loading partition secure-os at 0x8530f600
[0000.683] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.689] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.697] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.703] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.710] I> Erasing Monitor @ 0x8530f800
[0000.714] I> Unhalting SCE
[0000.717] I> Primary Memory Start:80000000 Size:70000000
[0000.722] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.729] I> Waypoint2-ACK: 0x52012714
[0000.732] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.974] I> Welcome to Cboot
[0000.977] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0000.982] I> CPU-BL Params @ 0x277000000
[0000.986] I>  0) Base:0x00000000 Size:0x00000000
[0000.990] I>  1) Base:0x277f00000 Size:0x00100000
[0000.995] I>  2) Base:0x277e00000 Size:0x00100000
[0000.999] I>  3) Base:0x277d00000 Size:0x00100000
[0001.004] I>  4) Base:0x277c00000 Size:0x00100000
[0001.008] I>  5) Base:0x277b00000 Size:0x00100000
[0001.013] I>  6) Base:0x277800000 Size:0x00200000
[0001.017] I>  7) Base:0x277400000 Size:0x00400000
[0001.022] I>  8) Base:0x277a00000 Size:0x00100000
[0001.026] I>  9) Base:0x277300000 Size:0x00100000
[0001.031] I> 10) Base:0x276800000 Size:0x00800000
[0001.035] I> 11) Base:0x30000000 Size:0x00040000
[0001.040] I> 12) Base:0xf0000000 Size:0x00100000
[0001.044] I> 13) Base:0x30040000 Size:0x00001000
[0001.048] I> 14) Base:0x30048000 Size:0x00001000
[0001.053] I> 15) Base:0x30049000 Size:0x00001000
[0001.057] I> 16) Base:0x3004a000 Size:0x00001000
[0001.062] I> 17) Base:0x3004b000 Size:0x00001000
[0001.066] I> 18) Base:0x3004c000 Size:0x00001000
[0001.071] I> 19) Base:0x3004d000 Size:0x00001000
[0001.075] I> 20) Base:0x3004e000 Size:0x00001000
[0001.080] I> 21) Base:0x3004f000 Size:0x00001000
[0001.084] I> 22) Base:0x00000000 Size:0x00000000
[0001.088] I> 23) Base:0xf0100000 Size:0x00010000
[0001.093] I> 24) Base:0x00000000 Size:0x00000000
[0001.097] I> 25) Base:0x00000000 Size:0x00000000
[0001.102] I> 26) Base:0x00000000 Size:0x00000000
[0001.106] I> 27) Base:0x00000000 Size:0x00000000
[0001.111] I> 28) Base:0x84400000 Size:0x00400000
[0001.115] I> 29) Base:0x30000000 Size:0x00010000
[0001.119] I> 30) Base:0x278000000 Size:0x08000000
[0001.124] I> 31) Base:0x00000000 Size:0x00000000
[0001.128] I> 32) Base:0x276000000 Size:0x00600000
[0001.133] I> 33) Base:0x80000000 Size:0x70000000
[0001.137] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.142] I> 35) Base:0x00000000 Size:0x00000000
[0001.146] I> 36) Base:0x00000000 Size:0x00000000
[0001.151] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.155] I> 38) Base:0x84000000 Size:0x00400000
[0001.160] I> 39) Base:0x96000000 Size:0x02400000
[0001.164] I> 40) Base:0x85000000 Size:0x01200000
[0001.168] I> 41) Base:0x277000000 Size:0x00280000
[0001.173] I> 42) Base:0x00000000 Size:0x00000000
[0001.177] I> 43) Base:0x00000000 Size:0x00000000
[0001.182] GIC-SPI Target CPU: 4
[0001.185] Interrupts Init done
[0001.189] calling constructors
[0001.192] initializing heap
[0001.194] initializing threads
[0001.198] initializing timers
[0001.201] creating bootstrap completion thread
[0001.206] top of bootstrap2()
[0001.209] CPU: ARM Cortex A57
[0001.212] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.217] initializing platform
[0001.220] I> Boot-device: eMMC
[0001.225] I> sdmmc bdev is already initialized
[0001.229] I> Reading GPT from 512 for device 00000003
[0001.235] I> Reading GPT from 8388096 for device 00000003
[0001.241] I> Found 13 partitions in 00000003 device
[0001.246] I> Reading GPT from 512 for device 00010003
[0001.252] I> Found 29 partitions in 00010003 device
[0001.257] W> opt-in fuse is not set, skip fuse_burning
[0001.262] I> Bl_dtb @0x8520f400
[0001.264] I> gpio framework initialized
[0001.268] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.276] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.283] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.292] E> i2c dev write failed
[0001.295] E> tca9539_device_init: failed to write polar reg
[0001.301] E> tegrabl_tca9539_init: failed to init device!
[0001.306] E> GPIO TCA9539 driver init failed
[0001.428] I> decompressor handler not found
[0001.435] I> fixed regulator driver initialized
[0001.472] I> register 'maxim' power off handle
[0001.478] I> virtual i2c enabled
[0001.481] I> registered 'maxim,max77620' pmic
[0001.485] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.496] I> Find /i2c@c250000's alias i2c7
[0001.500] I> Reading eeprom i2c=7 address=0x50
[0001.531] I> Device at /i2c@c250000:0x50
[0001.535] I> Reading eeprom i2c=7 address=0x57
[0001.540] E> i2c dev read failed
[0001.543] E> eeprom: Failed to read I2C slave device
[0001.548] I> Eeprom read failed 0x1a89800d
[0001.553] I> Find /i2c@c240000's alias i2c1
[0001.557] I> Reading eeprom i2c=1 address=0x51
[0001.564] E> i2c dev read failed
[0001.567] E> eeprom: Retry to read I2C slave device.
[0001.573] E> i2c dev read failed
[0001.576] E> eeprom: Failed to read I2C slave device
[0001.581] I> Eeprom read failed 0x1a89800d
[0001.585] I> Find /i2c@3160000's alias i2c0
[0001.589] I> Reading eeprom i2c=0 address=0x50
[0001.594] E> i2c dev read failed
[0001.597] E> eeprom: Failed to read I2C slave device
[0001.602] I> Eeprom read failed 0x1a89800d
[0001.607] I> Find /i2c@3180000's alias i2c2
[0001.611] I> Reading eeprom i2c=2 address=0x54
[0001.615] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.620] C> GPIO driver for chip_id 0x2 could not be found
[0001.625] E> cam_eeprom_read: Can't get gpio driver
[0001.630] I> Eeprom read failed 0x2693400d
[0001.634] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.639] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.654] I> found one nvdisp nodes at offset = 104564
[0001.659] I> found one nvdisp nodes at offset = 105480
[0001.664] I> found one nvdisp nodes at offset = 106284
[0001.669] I> no valid display unit config found in dtb
[0001.674] W> display init failed
[0001.677] initializing target
[0001.680] calling apps_init()
[0001.683] starting app android_boot_app
[0001.687] I> Gpio keyboard init success
[0001.691] I> Kernel type = Normal
[0001.694] I> Loading kernel/boot.img from storage ...
[0001.699] W> No valid slot number is found in scratch register
[0001.705] W> Return default slot: _a
[0001.708] I> A/B: bin_type (0) slot 0
[0001.712] I> Loading partition kernel at 0xa8000000
[0002.503] I> tegrabl_auth_payload: partition kernel (bin_type 0)
[0002.511] W> No valid slot number is found in scratch register
[0002.516] W> Return default slot: _a
[0002.520] I> A/B: bin_type (1) slot 0
[0002.523] I> Loading partition kernel-dtb at 0x92000000
[0002.535] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1)
[0002.541] C> ERROR: Highest Layer Module = 0x1d, Lowest Layer Module = 0x40,
Aux Info = 0x0, Reason = 0xd
[00000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.192] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.197] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.202] I> bit @ 0xd480000
[0000.205] I> BR-BCT relocated to 0xd7020000
[0000.209] I> Boot-device: eMMC
[0000.212] I> sdmmc bdev is already initialized
[0000.217] I> pmic: reset reason (nverc)        : 0x0
[0000.221] I> Reading GPT from 512 for device 00000003
[0000.227] I> Reading GPT from 8388096 for device 00000003
[0000.234] I> Found 13 partitions in 00000003 device
[0000.239] I> Reading GPT from 512 for device 00010003
[0000.246] I> Found 29 partitions in 00010003 device
[0000.251] W> No valid slot number is found in scratch register
[0000.257] W> Return default slot: _a
[0000.260] I> A/B: bin_type (16) slot 0
[0000.264] I> Loading partition bpmp-fw at 0xd7800000
[0000.269] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.274] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.289] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.295] W> No valid slot number is found in scratch register
[0000.300] W> Return default slot: _a
[0000.304] I> A/B: bin_type (17) slot 0
[0000.307] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.313] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.318] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.332] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.510] I> BPMP-FW load address = 0xd7800000
[0000.514] I> BPMP-FW DTB load address = 0x5018e200
[0000.519] I> Loading SCE-FW ...
[0000.522] W> No valid slot number is found in scratch register
[0000.528] W> Return default slot: _a
[0000.531] I> A/B: bin_type (12) slot 0
[0000.535] I> Loading partition sce-fw at 0xd7300000
[0000.539] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.545] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.554] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.559] I> Init SCE
[0000.562] I> Copy BTCM section
[0000.564] W> No valid slot number is found in scratch register
[0000.570] W> Return default slot: _a
[0000.573] I> A/B: bin_type (13) slot 0
[0000.577] I> Loading partition cpu-bootloader at 0x96000000
[0000.583] I> Reading two headers - addr:0x96000000 blocks:1
[0000.588] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.599] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.605] W> No valid slot number is found in scratch register
[0000.611] W> Return default slot: _a
[0000.614] I> A/B: bin_type (20) slot 0
[0000.618] I> Loading partition bootloader-dtb at 0x8520f400
[0000.623] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.629] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.640] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.646] I> MB2-params(VA) @ 0xd7000000
[0000.650] I> CPUBL-params(VA) @ 0xd7000000
[0000.654] I> CPUBL-params(PA) @ 0x277000000
[0000.658] I> CPU-BL loaded @ PA 0x96000000
[0000.662] I> Loading TOS ...
[0000.664] W> No valid slot number is found in scratch register
[0000.670] W> Return default slot: _a
[0000.673] I> A/B: bin_type (14) slot 0
[0000.677] I> Loading partition secure-os at 0x8530f600
[0000.682] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.688] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.696] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.702] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.709] I> Erasing Monitor @ 0x8530f800
[0000.713] I> Unhalting SCE
[0000.716] I> Primary Memory Start:80000000 Size:70000000
[0000.721] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.728] I> Waypoint2-ACK: 0x52012714
[0000.731] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.973] I> Welcome to Cboot
[0000.976] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0000.981] I> CPU-BL Params @ 0x277000000
[0000.984] I>  0) Base:0x00000000 Size:0x00000000
[0000.989] I>  1) Base:0x277f00000 Size:0x00100000
[0000.993] I>  2) Base:0x277e00000 Size:0x00100000
[0000.998] I>  3) Base:0x277d00000 Size:0x00100000
[0001.002] I>  4) Base:0x277c00000 Size:0x00100000
[0001.007] I>  5) Base:0x277b00000 Size:0x00100000
[0001.011] I>  6) Base:0x277800000 Size:0x00200000
[0001.016] I>  7) Base:0x277400000 Size:0x00400000
[0001.021] I>  8) Base:0x277a00000 Size:0x00100000
[0001.025] I>  9) Base:0x277300000 Size:0x00100000
[0001.030] I> 10) Base:0x276800000 Size:0x00800000
[0001.034] I> 11) Base:0x30000000 Size:0x00040000
[0001.039] I> 12) Base:0xf0000000 Size:0x00100000
[0001.043] I> 13) Base:0x30040000 Size:0x00001000
[0001.047] I> 14) Base:0x30048000 Size:0x00001000
[0001.052] I> 15) Base:0x30049000 Size:0x00001000
[0001.056] I> 16) Base:0x3004a000 Size:0x00001000
[0001.061] I> 17) Base:0x3004b000 Size:0x00001000
[0001.065] I> 18) Base:0x3004c000 Size:0x00001000
[0001.070] I> 19) Base:0x3004d000 Size:0x00001000
[0001.074] I> 20) Base:0x3004e000 Size:0x00001000
[0001.078] I> 21) Base:0x3004f000 Size:0x00001000
[0001.083] I> 22) Base:0x00000000 Size:0x00000000
[0001.087] I> 23) Base:0xf0100000 Size:0x00010000
[0001.092] I> 24) Base:0x00000000 Size:0x00000000
[0001.096] I> 25) Base:0x00000000 Size:0x00000000
[0001.101] I> 26) Base:0x00000000 Size:0x00000000
[0001.105] I> 27) Base:0x00000000 Size:0x00000000
[0001.109] I> 28) Base:0x84400000 Size:0x00400000
[0001.114] I> 29) Base:0x30000000 Size:0x00010000
[0001.118] I> 30) Base:0x278000000 Size:0x08000000
[0001.123] I> 31) Base:0x00000000 Size:0x00000000
[0001.127] I> 32) Base:0x276000000 Size:0x00600000
[0001.132] I> 33) Base:0x80000000 Size:0x70000000
[0001.136] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.141] I> 35) Base:0x00000000 Size:0x00000000
[0001.145] I> 36) Base:0x00000000 Size:0x00000000
[0001.150] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.154] I> 38) Base:0x84000000 Size:0x00400000
[0001.159] I> 39) Base:0x96000000 Size:0x02400000
[0001.163] I> 40) Base:0x85000000 Size:0x01200000
[0001.167] I> 41) Base:0x277000000 Size:0x00280000
[0001.172] I> 42) Base:0x00000000 Size:0x00000000
[0001.176] I> 43) Base:0x00000000 Size:0x00000000
[0001.181] GIC-SPI Target CPU: 4
[0001.184] Interrupts Init done
[0001.187] calling constructors
[0001.191] initializing heap
[0001.193] initializing threads
[0001.197] initializing timers
[0001.200] creating bootstrap completion thread
[0001.205] top of bootstrap2()
[0001.208] CPU: ARM Cortex A57
[0001.211] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.216] initializing platform
[0001.219] I> Boot-device: eMMC
[0001.223] I> sdmmc bdev is already initialized
[0001.228] I> Reading GPT from 512 for device 00000003
[0001.233] I> Reading GPT from 8388096 for device 00000003
[0001.240] I> Found 13 partitions in 00000003 device
[0001.245] I> Reading GPT from 512 for device 00010003
[0001.251] I> Found 29 partitions in 00010003 device
[0001.255] W> opt-in fuse is not set, skip fuse_burning
[0001.260] I> Bl_dtb @0x8520f400
[0001.263] I> gpio framework initialized
[0001.267] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.275] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.282] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.291] E> i2c dev write failed
[0001.294] E> tca9539_device_init: failed to write polar reg
[0001.299] E> tegrabl_tca9539_init: failed to init device!
[0001.304] E> GPIO TCA9539 driver init failed
[0001.427] I> decompressor handler not found
[0001.434] I> fixed regulator driver initialized
[0001.470] I> register 'maxim' power off handle
[0001.476] I> virtual i2c enabled
[0001.479] I> registered 'maxim,max77620' pmic
[0001.484] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.495] I> Find /i2c@c250000's alias i2c7
[0001.499] I> Reading eeprom i2c=7 address=0x50
[0001.530] I> Device at /i2c@c250000:0x50
[0001.534] I> Reading eeprom i2c=7 address=0x57
[0001.539] E> i2c dev read failed
[0001.542] E> eeprom: Failed to read I2C slave device
[0001.547] I> Eeprom read failed 0x1a89800d
[0001.551] I> Find /i2c@c240000's alias i2c1
[0001.555] I> Reading eeprom i2c=1 address=0x51
[0001.562] E> i2c dev read failed
[0001.565] E> eeprom: Retry to read I2C slave device.
[0001.571] E> i2c dev read failed
[0001.574] E> eeprom: Failed to read I2C slave device
[0001.579] I> Eeprom read failed 0x1a89800d
[0001.584] I> Find /i2c@3160000's alias i2c0
[0001.588] I> Reading eeprom i2c=0 address=0x50
[0001.593] E> i2c dev read failed
[0001.596] E> eeprom: Failed to read I2C slave device
[0001.601] I> Eeprom read failed 0x1a89800d
[0001.605] I> Find /i2c@3180000's alias i2c2
[0001.609] I> Reading eeprom i2c=2 address=0x54
[0001.614] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.618] C> GPIO driver for chip_id 0x2 could not be found
[0001.624] E> cam_eeprom_read: Can't get gpio driver
[0001.629] I> Eeprom read failed 0x2693400d
[0001.632] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.638] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.652] I> found one nvdisp nodes at offset = 104564
[0001.657] I> found one nvdisp nodes at offset = 105480
[0001.662] I> found one nvdisp nodes at offset = 106284
[0001.667] I> no valid display unit config found in dtb
[0001.672] W> display init failed
[0001.675] initializing target
[0001.679] calling apps_init()
[0001.682] starting app android_boot_app
[0001.686] I> Gpio keyboard init success
[0001.690] I> Kernel type = Normal
[0001.693] I> Loading kernel/boot.img from storage ...
[0001.698] W> No valid slot number is found in scratch register
[0001.703] W> Return default slot: _a
[0001.707] I> A/B: bin_type (0) slot 0
[0001.710] I> Loading partition kernel at 0xa8000000
[0000.216] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.224] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.229] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.233] I> bit @ 0xd480000
[0000.236] I> BR-BCT relocated to 0xd7020000
[0000.241] I> Boot-device: eMMC
[0000.244] I> sdmmc bdev is already initialized
[0000.249] I> pmic: reset reason (nverc)        : 0x40
[0000.253] I> Reading GPT from 512 for device 00000003
[0000.259] I> Reading GPT from 8388096 for device 00000003
[0000.266] I> Found 13 partitions in 00000003 device
[0000.271] I> Reading GPT from 512 for device 00010003
[0000.278] I> Found 29 partitions in 00010003 device
[0000.283] W> No valid slot number is found in scratch register
[0000.289] W> Return default slot: _a
[0000.292] I> A/B: bin_type (16) slot 0
[0000.296] I> Loading partition bpmp-fw at 0xd7800000
[0000.301] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.306] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.321] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.327] W> No valid slot number is found in scratch register
[0000.332] W> Return default slot: _a
[0000.336] I> A/B: bin_type (17) slot 0
[0000.339] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.345] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.350] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.364] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.542] I> BPMP-FW load address = 0xd7800000
[0000.546] I> BPMP-FW DTB load address = 0x5018e200
[0000.551] I> Loading SCE-FW ...
[0000.554] W> No valid slot number is found in scratch register
[0000.559] W> Return default slot: _a
[0000.563] I> A/B: bin_type (12) slot 0
[0000.566] I> Loading partition sce-fw at 0xd7300000
[0000.571] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.577] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.585] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.591] I> Init SCE
[0000.593] I> Copy BTCM section
[0000.596] W> No valid slot number is found in scratch register
[0000.602] W> Return default slot: _a
[0000.605] I> A/B: bin_type (13) slot 0
[0000.609] I> Loading partition cpu-bootloader at 0x96000000
[0000.614] I> Reading two headers - addr:0x96000000 blocks:1
[0000.620] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.631] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.637] W> No valid slot number is found in scratch register
[0000.643] W> Return default slot: _a
[0000.646] I> A/B: bin_type (20) slot 0
[0000.650] I> Loading partition bootloader-dtb at 0x8520f400
[0000.655] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.661] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.672] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.678] I> MB2-params(VA) @ 0xd7000000
[0000.681] I> CPUBL-params(VA) @ 0xd7000000
[0000.685] I> CPUBL-params(PA) @ 0x277000000
[0000.689] I> CPU-BL loaded @ PA 0x96000000
[0000.693] I> Loading TOS ...
[0000.696] W> No valid slot number is found in scratch register
[0000.702] W> Return default slot: _a
[0000.705] I> A/B: bin_type (14) slot 0
[0000.709] I> Loading partition secure-os at 0x8530f600
[0000.714] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.719] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.728] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.734] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.741] I> Erasing Monitor @ 0x8530f800
[0000.745] I> Unhalting SCE
[0000.748] I> Primary Memory Start:80000000 Size:70000000
[0000.753] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.759] I> Waypoint2-ACK: 0x52012714
[0000.763] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0001.004] I> Welcome to Cboot
[0001.007] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0001.012] I> CPU-BL Params @ 0x277000000
[0001.016] I>  0) Base:0x00000000 Size:0x00000000
[0001.020] I>  1) Base:0x277f00000 Size:0x00100000
[0001.025] I>  2) Base:0x277e00000 Size:0x00100000
[0001.029] I>  3) Base:0x277d00000 Size:0x00100000
[0001.034] I>  4) Base:0x277c00000 Size:0x00100000
[0001.038] I>  5) Base:0x277b00000 Size:0x00100000
[0001.043] I>  6) Base:0x277800000 Size:0x00200000
[0001.047] I>  7) Base:0x277400000 Size:0x00400000
[0001.052] I>  8) Base:0x277a00000 Size:0x00100000
[0001.056] I>  9) Base:0x277300000 Size:0x00100000
[0001.061] I> 10) Base:0x276800000 Size:0x00800000
[0001.065] I> 11) Base:0x30000000 Size:0x00040000
[0001.070] I> 12) Base:0xf0000000 Size:0x00100000
[0001.074] I> 13) Base:0x30040000 Size:0x00001000
[0001.079] I> 14) Base:0x30048000 Size:0x00001000
[0001.083] I> 15) Base:0x30049000 Size:0x00001000
[0001.088] I> 16) Base:0x3004a000 Size:0x00001000
[0001.092] I> 17) Base:0x3004b000 Size:0x00001000
[0001.096] I> 18) Base:0x3004c000 Size:0x00001000
[0001.101] I> 19) Base:0x3004d000 Size:0x00001000
[0001.105] I> 20) Base:0x3004e000 Size:0x00001000
[0001.110] I> 21) Base:0x3004f000 Size:0x00001000
[0001.114] I> 22) Base:0x00000000 Size:0x00000000
[0001.119] I> 23) Base:0xf0100000 Size:0x00010000
[0001.123] I> 24) Base:0x00000000 Size:0x00000000
[0001.128] I> 25) Base:0x00000000 Size:0x00000000
[0001.132] I> 26) Base:0x00000000 Size:0x00000000
[0001.136] I> 27) Base:0x00000000 Size:0x00000000
[0001.141] I> 28) Base:0x84400000 Size:0x00400000
[0001.145] I> 29) Base:0x30000000 Size:0x00010000
[0001.150] I> 30) Base:0x278000000 Size:0x08000000
[0001.154] I> 31) Base:0x00000000 Size:0x00000000
[0001.159] I> 32) Base:0x276000000 Size:0x00600000
[0001.163] I> 33) Base:0x80000000 Size:0x70000000
[0001.168] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.172] I> 35) Base:0x00000000 Size:0x00000000
[0001.177] I> 36) Base:0x00000000 Size:0x00000000
[0001.181] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.185] I> 38) Base:0x84000000 Size:0x00400000
[0001.190] I> 39) Base:0x96000000 Size:0x02400000
[0001.194] I> 40) Base:0x85000000 Size:0x01200000
[0001.199] I> 41) Base:0x277000000 Size:0x00280000
[0001.203] I> 42) Base:0x00000000 Size:0x00000000
[0001.208] I> 43) Base:0x00000000 Size:0x00000000
[0001.212] GIC-SPI Target CPU: 4
[0001.216] Interrupts Init done
[0001.219] calling constructors
[0001.222] initializing heap
[0001.225] initializing threads
[0001.228] initializing timers
[0001.231] creating bootstrap completion thread
[0001.236] top of bootstrap2()
[0001.239] CPU: ARM Cortex A57
[0001.242] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.247] initializing platform
[0001.251] I> Boot-device: eMMC
[0001.255] I> sdmmc bdev is already initialized
[0001.259] I> Reading GPT from 512 for device 00000003
[0001.265] I> Reading GPT from 8388096 for device 00000003
[0001.271] I> Found 13 partitions in 00000003 device
[0001.276] I> Reading GPT from 512 for device 00010003
[0001.282] I> Found 29 partitions in 00010003 device
[0001.287] W> opt-in fuse is not set, skip fuse_burning
[0001.292] I> Bl_dtb @0x8520f400
[0001.295] I> gpio framework initialized
[0001.298] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.306] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.313] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.322] E> i2c dev write failed
[0001.325] E> tca9539_device_init: failed to write polar reg
[0001.331] E> tegrabl_tca9539_init: failed to init device!
[0001.336] E> GPIO TCA9539 driver init failed
[0001.458] I> decompressor handler not found
[0001.465] I> fixed regulator driver initialized
[0001.502] I> register 'maxim' power off handle
[0001.508] I> virtual i2c enabled
[0001.511] I> registered 'maxim,max77620' pmic
[0001.515] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.526] I> Find /i2c@c250000's alias i2c7
[0001.530] I> Reading eeprom i2c=7 address=0x50
[0001.561] I> Device at /i2c@c250000:0x50
[0001.565] I> Reading eeprom i2c=7 address=0x57
[0001.570] E> i2c dev read failed
[0001.573] E> eeprom: Failed to read I2C slave device
[0001.578] I> Eeprom read failed 0x1a89800d
[0001.583] I> Find /i2c@c240000's alias i2c1
[0001.587] I> Reading eeprom i2c=1 address=0x51
[0001.594] E> i2c dev read failed
[0001.597] E> eeprom: Retry to read I2C slave device.
[0001.603] E> i2c dev read failed
[0001.606] E> eeprom: Failed to read I2C slave device
[0001.611] I> Eeprom read failed 0x1a89800d
[0001.615] I> Find /i2c@3160000's alias i2c0
[0001.619] I> Reading eeprom i2c=0 address=0x50
[0001.624] E> i2c dev read failed
[0001.627] E> eeprom: Failed to read I2C slave device
[0001.632] I> Eeprom read failed 0x1a89800d
[0001.637] I> Find /i2c@3180000's alias i2c2
[0001.641] I> Reading eeprom i2c=2 address=0x54
[0001.645] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.650] C> GPIO driver for chip_id 0x2 could not be found
[0001.655] E> cam_eeprom_read: Can't get gpio driver
[0001.660] I> Eeprom read failed 0x2693400d
[0001.664] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.669] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.684] I> found one nvdisp nodes at offset = 104564
[0001.689] I> found one nvdisp nodes at offset = 105480
[0001.694] I> found one nvdisp nodes at offset = 106284
[0001.699] I> no valid display unit config found in dtb
[0001.704] W> display init failed
[0001.707] initializing target
[0001.710] calling apps_init()
[0001.713] starting app android_boot_app
[0001.717] I> Gpio keyboard init success
[0001.721] I> Kernel type = Normal
[0001.724] I> Loading kernel/boot.img from storage ...
[0001.729] W> No valid slot number is found in scratch register
[0001.735] W> Return default slot: _a
[0001.738] I> A/B: bin_type (0) slot 0
[0001.742] I> Loading partition kernel at 0xa8000000
[0002.533] I> tegrabl_auth_payload: partition kernel (bin_type 0)
[0002.541] W> No valid slot number is found in scratch register
[0002.546] W> Return default slot: _a
[0002.550] I> A/B: bin_type (1) slot 0
[0002.553] I> Loading partition kernel-dtb at 0x92000000
[0002.565] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1)
[0002.571] C> ERROR: Highest Layer Module = 0x1d, Lowest Layer Module = 0x40,
Aux Info = 0x0, Reason = 0xd
[0黐0000.205] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.214] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.219] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.223] I> bit @ 0xd480000
[0000.226] I> BR-BCT relocated to 0xd7020000
[0000.230] I> Boot-device: eMMC
[0000.234] I> sdmmc bdev is already initialized
[0000.239] I> pmic: reset reason (nverc)        : 0x0
[0000.243] I> Reading GPT from 512 for device 00000003
[0000.249] I> Reading GPT from 8388096 for device 00000003
[0000.256] I> Found 13 partitions in 00000003 device
[0000.261] I> Reading GPT from 512 for device 00010003
[0000.267] I> Found 29 partitions in 00010003 device
[0000.273] W> No valid slot number is found in scratch register
[0000.278] W> Return default slot: _a
[0000.282] I> A/B: bin_type (16) slot 0
[0000.285] I> Loading partition bpmp-fw at 0xd7800000
[0000.290] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.296] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.311] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.316] W> No valid slot number is found in scratch register
[0000.322] W> Return default slot: _a
[0000.325] I> A/B: bin_type (17) slot 0
[0000.329] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.334] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.340] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.353] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.531] I> BPMP-FW load address = 0xd7800000
[0000.536] I> BPMP-FW DTB load address = 0x5018e200
[0000.540] I> Loading SCE-FW ...
[0000.543] W> No valid slot number is found in scratch register
[0000.549] W> Return default slot: _a
[0000.553] I> A/B: bin_type (12) slot 0
[0000.556] I> Loading partition sce-fw at 0xd7300000
[0000.561] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.566] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.575] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.581] I> Init SCE
[0000.583] I> Copy BTCM section
[0000.586] W> No valid slot number is found in scratch register
[0000.592] W> Return default slot: _a
[0000.595] I> A/B: bin_type (13) slot 0
[0000.599] I> Loading partition cpu-bootloader at 0x96000000
[0000.604] I> Reading two headers - addr:0x96000000 blocks:1
[0000.609] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.621] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.627] W> No valid slot number is found in scratch register
[0000.632] W> Return default slot: _a
[0000.636] I> A/B: bin_type (20) slot 0
[0000.639] I> Loading partition bootloader-dtb at 0x8520f400
[0000.645] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.650] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.662] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.667] I> MB2-params(VA) @ 0xd7000000
[0000.671] I> CPUBL-params(VA) @ 0xd7000000
[0000.675] I> CPUBL-params(PA) @ 0x277000000
[0000.679] I> CPU-BL loaded @ PA 0x96000000
[0000.683] I> Loading TOS ...
[0000.686] W> No valid slot number is found in scratch register
[0000.692] W> Return default slot: _a
[0000.695] I> A/B: bin_type (14) slot 0
[0000.699] I> Loading partition secure-os at 0x8530f600
[0000.704] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.709] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.718] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.723] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.730] I> Erasing Monitor @ 0x8530f800
[0000.735] I> Unhalting SCE
[0000.737] I> Primary Memory Start:80000000 Size:70000000
[0000.743] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.749] I> Waypoint2-ACK: 0x52012714
[0000.753] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.994] I> Welcome to Cboot
[0000.997] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0001.002] I> CPU-BL Params @ 0x277000000
[0001.006] I>  0) Base:0x00000000 Size:0x00000000
[0001.010] I>  1) Base:0x277f00000 Size:0x00100000
[0001.015] I>  2) Base:0x277e00000 Size:0x00100000
[0001.019] I>  3) Base:0x277d00000 Size:0x00100000
[0001.024] I>  4) Base:0x277c00000 Size:0x00100000
[0001.028] I>  5) Base:0x277b00000 Size:0x00100000
[0001.033] I>  6) Base:0x277800000 Size:0x00200000
[0001.037] I>  7) Base:0x277400000 Size:0x00400000
[0001.042] I>  8) Base:0x277a00000 Size:0x00100000
[0001.046] I>  9) Base:0x277300000 Size:0x00100000
[0001.051] I> 10) Base:0x276800000 Size:0x00800000
[0001.055] I> 11) Base:0x30000000 Size:0x00040000
[0001.060] I> 12) Base:0xf0000000 Size:0x00100000
[0001.064] I> 13) Base:0x30040000 Size:0x00001000
[0001.069] I> 14) Base:0x30048000 Size:0x00001000
[0001.073] I> 15) Base:0x30049000 Size:0x00001000
[0001.078] I> 16) Base:0x3004a000 Size:0x00001000
[0001.082] I> 17) Base:0x3004b000 Size:0x00001000
[0001.086] I> 18) Base:0x3004c000 Size:0x00001000
[0001.091] I> 19) Base:0x3004d000 Size:0x00001000
[0001.095] I> 20) Base:0x3004e000 Size:0x00001000
[0001.100] I> 21) Base:0x3004f000 Size:0x00001000
[0001.104] I> 22) Base:0x00000000 Size:0x00000000
[0001.109] I> 23) Base:0xf0100000 Size:0x00010000
[0001.113] I> 24) Base:0x00000000 Size:0x00000000
[0001.117] I> 25) Base:0x00000000 Size:0x00000000
[0001.122] I> 26) Base:0x00000000 Size:0x00000000
[0001.126] I> 27) Base:0x00000000 Size:0x00000000
[0001.131] I> 28) Base:0x84400000 Size:0x00400000
[0001.135] I> 29) Base:0x30000000 Size:0x00010000
[0001.140] I> 30) Base:0x278000000 Size:0x08000000
[0001.144] I> 31) Base:0x00000000 Size:0x00000000
[0001.149] I> 32) Base:0x276000000 Size:0x00600000
[0001.153] I> 33) Base:0x80000000 Size:0x70000000
[0001.158] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.162] I> 35) Base:0x00000000 Size:0x00000000
[0001.166] I> 36) Base:0x00000000 Size:0x00000000
[0001.171] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.175] I> 38) Base:0x84000000 Size:0x00400000
[0001.180] I> 39) Base:0x96000000 Size:0x02400000
[0001.184] I> 40) Base:0x85000000 Size:0x01200000
[0001.189] I> 41) Base:0x277000000 Size:0x00280000
[0001.193] I> 42) Base:0x00000000 Size:0x00000000
[0001.198] I> 43) Base:0x00000000 Size:0x00000000
[0001.202] GIC-SPI Target CPU: 4
[0001.205] Interrupts Init done
[0001.209] calling constructors
[0001.212] initializing heap
[0001.215] initializing threads
[0001.218] initializing timers
[0001.221] creating bootstrap completion thread
[0001.226] top of bootstrap2()
[0001.229] CPU: ARM Cortex A57
[0001.232] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.237] initializing platform
[0001.241] I> Boot-device: eMMC
[0001.245] I> sdmmc bdev is already initialized
[0001.249] I> Reading GPT from 512 for device 00000003
[0001.255] I> Reading GPT from 8388096 for device 00000003
[0001.261] I> Found 13 partitions in 00000003 device
[0001.266] I> Reading GPT from 512 for device 00010003
[0001.272] I> Found 29 partitions in 00010003 device
[0001.277] W> opt-in fuse is not set, skip fuse_burning
[0001.282] I> Bl_dtb @0x8520f400
[0001.285] I> gpio framework initialized
[0001.288] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.296] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.303] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.312] E> i2c dev write failed
[0001.315] E> tca9539_device_init: failed to write polar reg
[0001.321] E> tegrabl_tca9539_init: failed to init device!
[0001.326] E> GPIO TCA9539 driver init failed
[0001.449] I> decompressor handler not found
[0001.456] I> fixed regulator driver initialized
[0001.492] I> register 'maxim' power off handle
[0001.498] I> virtual i2c enabled
[0001.501] I> registered 'maxim,max77620' pmic
[0001.505] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.516] I> Find /i2c@c250000's alias i2c7
[0001.520] I> Reading eeprom i2c=7 address=0x50
[0001.552] I> Device at /i2c@c250000:0x50
[0001.555] I> Reading eeprom i2c=7 address=0x57
[0001.561] E> i2c dev read failed
[0001.564] E> eeprom: Failed to read I2C slave device
[0001.568] I> Eeprom read failed 0x1a89800d
[0001.573] I> Find /i2c@c240000's alias i2c1
[0001.577] I> Reading eeprom i2c=1 address=0x51
[0001.584] E> i2c dev read failed
[0001.587] E> eeprom: Retry to read I2C slave device.
[0001.593] E> i2c dev read failed
[0001.596] E> eeprom: Failed to read I2C slave device
[0001.601] I> Eeprom read failed 0x1a89800d
[0001.605] I> Find /i2c@3160000's alias i2c0
[0001.609] I> Reading eeprom i2c=0 address=0x50
[0001.614] E> i2c dev read failed
[0001.618] E> eeprom: Failed to read I2C slave device
[0001.622] I> Eeprom read failed 0x1a89800d
[0001.627] I> Find /i2c@3180000's alias i2c2
[0001.631] I> Reading eeprom i2c=2 address=0x54
[0001.635] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.640] C> GPIO driver for chip_id 0x2 could not be found
[0001.646] E> cam_eeprom_read: Can't get gpio driver
[0001.650] I> Eeprom read failed 0x2693400d
[0001.654] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.659] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.674] I> found one nvdisp nodes at offset = 104564
[0001.679] I> found one nvdisp nodes at offset = 105480
[0001.684] I> found one nvdisp nodes at offset = 106284
[0001.689] I> no valid display unit config found in dtb
[0001.694] W> display init failed
[0001.697] initializing target
[0001.700] calling apps_init()
[0001.703] starting app android_boot_app
[0001.707] I> Gpio keyboard init success
[0001.711] I> Kernel type = Normal
[0001.714] I> Loading kernel/boot.img from storage ...
[0001.719] W> No valid slot number is found in scratch register
[0001.725] W> Return default slot: _a
[0001.728] I> A/B: bin_type (0) slot 0
[0001.732] I> Loading partition kernel at 0xa8000000
[0002.523] I> tegrabl_auth_payload: partition kernel (bin_type 0)
[0002.531] W> No valid slot number is found in scratch register
[0002.536] W> Return default slot: _a
[0002.540] I> A/B: bin_type (1) slot 0
[0002.543] I> Loading partition kernel-dtb at 0x92000000
[0002.555] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1)
[0002.561] C> ERROR: Highest Layer Module = 0x1d, Lowest Layer Module = 0x40,
Aux Info = 0x0, Reason = 0xd
[00000.205] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.214] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.218] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.223] I> bit @ 0xd480000
[0000.226] I> BR-BCT relocated to 0xd7020000
[0000.230] I> Boot-device: eMMC
[0000.234] I> sdmmc bdev is already initialized
[0000.239] I> pmic: reset reason (nverc)        : 0x0
[0000.243] I> Reading GPT from 512 for device 00000003
[0000.249] I> Reading GPT from 8388096 for device 00000003
[0000.256] I> Found 13 partitions in 00000003 device
[0000.261] I> Reading GPT from 512 for device 00010003
[0000.267] I> Found 29 partitions in 00010003 device
[0000.273] W> No valid slot number is found in scratch register
[0000.278] W> Return default slot: _a
[0000.282] I> A/B: bin_type (16) slot 0
[0000.285] I> Loading partition bpmp-fw at 0xd7800000
[0000.290] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.296] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.311] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.316] W> No valid slot number is found in scratch register
[0000.322] W> Return default slot: _a
[0000.325] I> A/B: bin_type (17) slot 0
[0000.329] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.334] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.340] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.353] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.531] I> BPMP-FW load address = 0xd7800000
[0000.536] I> BPMP-FW DTB load address = 0x5018e200
[0000.540] I> Loading SCE-FW ...
[0000.543] W> No valid slot number is found in scratch register
[0000.549] W> Return default slot: _a
[0000.552] I> A/B: bin_type (12) slot 0
[0000.556] I> Loading partition sce-fw at 0xd7300000
[0000.561] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.566] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.575] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.581] I> Init SCE
[0000.583] I> Copy BTCM section
[0000.586] W> No valid slot number is found in scratch register
[0000.592] W> Return default slot: _a
[0000.595] I> A/B: bin_type (13) slot 0
[0000.599] I> Loading partition cpu-bootloader at 0x96000000
[0000.604] I> Reading two headers - addr:0x96000000 blocks:1
[0000.609] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.621] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.627] W> No valid slot number is found in scratch register
[0000.632] W> Return default slot: _a
[0000.636] I> A/B: bin_type (20) slot 0
[0000.639] I> Loading partition bootloader-dtb at 0x8520f400
[0000.645] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.650] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.661] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.667] I> MB2-params(VA) @ 0xd7000000
[0000.671] I> CPUBL-params(VA) @ 0xd7000000
[0000.675] I> CPUBL-params(PA) @ 0x277000000
[0000.679] I> CPU-BL loaded @ PA 0x96000000
[0000.683] I> Loading TOS ...
[0000.686] W> No valid slot number is found in scratch register
[0000.691] W> Return default slot: _a
[0000.695] I> A/B: bin_type (14) slot 0
[0000.698] I> Loading partition secure-os at 0x8530f600
[0000.704] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.709] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.717] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.723] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.730] I> Erasing Monitor @ 0x8530f800
[0000.735] I> Unhalting SCE
[0000.737] I> Primary Memory Start:80000000 Size:70000000
[0000.742] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.749] I> Waypoint2-ACK: 0x52012714
[0000.753] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.994] I> Welcome to Cboot
[0000.996] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0001.001] I> CPU-BL Params @ 0x277000000
[0001.005] I>  0) Base:0x00000000 Size:0x00000000
[0001.010] I>  1) Base:0x277f00000 Size:0x00100000
[0001.014] I>  2) Base:0x277e00000 Size:0x00100000
[0001.019] I>  3) Base:0x277d00000 Size:0x00100000
[0001.023] I>  4) Base:0x277c00000 Size:0x00100000
[0001.028] I>  5) Base:0x277b00000 Size:0x00100000
[0001.032] I>  6) Base:0x277800000 Size:0x00200000
[0001.037] I>  7) Base:0x277400000 Size:0x00400000
[0001.041] I>  8) Base:0x277a00000 Size:0x00100000
[0001.046] I>  9) Base:0x277300000 Size:0x00100000
[0001.050] I> 10) Base:0x276800000 Size:0x00800000
[0001.055] I> 11) Base:0x30000000 Size:0x00040000
[0001.059] I> 12) Base:0xf0000000 Size:0x00100000
[0001.064] I> 13) Base:0x30040000 Size:0x00001000
[0001.068] I> 14) Base:0x30048000 Size:0x00001000
[0001.073] I> 15) Base:0x30049000 Size:0x00001000
[0001.077] I> 16) Base:0x3004a000 Size:0x00001000
[0001.081] I> 17) Base:0x3004b000 Size:0x00001000
[0001.086] I> 18) Base:0x3004c000 Size:0x00001000
[0001.090] I> 19) Base:0x3004d000 Size:0x00001000
[0001.095] I> 20) Base:0x3004e000 Size:0x00001000
[0001.099] I> 21) Base:0x3004f000 Size:0x00001000
[0001.104] I> 22) Base:0x00000000 Size:0x00000000
[0001.108] I> 23) Base:0xf0100000 Size:0x00010000
[0001.112] I> 24) Base:0x00000000 Size:0x00000000
[0001.117] I> 25) Base:0x00000000 Size:0x00000000
[0001.121] I> 26) Base:0x00000000 Size:0x00000000
[0001.126] I> 27) Base:0x00000000 Size:0x00000000
[0001.130] I> 28) Base:0x84400000 Size:0x00400000
[0001.135] I> 29) Base:0x30000000 Size:0x00010000
[0001.139] I> 30) Base:0x278000000 Size:0x08000000
[0001.143] I> 31) Base:0x00000000 Size:0x00000000
[0001.148] I> 32) Base:0x276000000 Size:0x00600000
[0001.152] I> 33) Base:0x80000000 Size:0x70000000
[0001.157] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.161] I> 35) Base:0x00000000 Size:0x00000000
[0001.166] I> 36) Base:0x00000000 Size:0x00000000
[0001.170] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.175] I> 38) Base:0x84000000 Size:0x00400000
[0001.179] I> 39) Base:0x96000000 Size:0x02400000
[0001.184] I> 40) Base:0x85000000 Size:0x01200000
[0001.188] I> 41) Base:0x277000000 Size:0x00280000
[0001.193] I> 42) Base:0x00000000 Size:0x00000000
[0001.197] I> 43) Base:0x00000000 Size:0x00000000
[0001.201] GIC-SPI Target CPU: 4
[0001.205] Interrupts Init done
[0001.208] calling constructors
[0001.211] initializing heap
[0001.214] initializing threads
[0001.217] initializing timers
[0001.220] creating bootstrap completion thread
[0001.225] top of bootstrap2()
[0001.228] CPU: ARM Cortex A57
[0001.231] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.237] initializing platform
[0001.240] I> Boot-device: eMMC
[0001.244] I> sdmmc bdev is already initialized
[0001.248] I> Reading GPT from 512 for device 00000003
[0001.254] I> Reading GPT from 8388096 for device 00000003
[0001.261] I> Found 13 partitions in 00000003 device
[0001.265] I> Reading GPT from 512 for device 00010003
[0001.271] I> Found 29 partitions in 00010003 device
[0001.276] W> opt-in fuse is not set, skip fuse_burning
[0001.281] I> Bl_dtb @0x8520f400
[0001.284] I> gpio framework initialized
[0001.288] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.295] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.303] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.312] E> i2c dev write failed
[0001.315] E> tca9539_device_init: failed to write polar reg
[0001.320] E> tegrabl_tca9539_init: failed to init device!
[0001.325] E> GPIO TCA9539 driver init failed
[0001.448] I> decompressor handler not found
[0001.455] I> fixed regulator driver initialized
[0001.491] I> register 'maxim' power off handle
[0001.497] I> virtual i2c enabled
[0001.500] I> registered 'maxim,max77620' pmic
[0001.505] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.516] I> Find /i2c@c250000's alias i2c7
[0001.520] I> Reading eeprom i2c=7 address=0x50
[0001.551] I> Device at /i2c@c250000:0x50
[0001.555] I> Reading eeprom i2c=7 address=0x57
[0001.560] E> i2c dev read failed
[0001.563] E> eeprom: Failed to read I2C slave device
[0001.568] I> Eeprom read failed 0x1a89800d
[0001.572] I> Find /i2c@c240000's alias i2c1
[0001.576] I> Reading eeprom i2c=1 address=0x51
[0001.584] E> i2c dev read failed
[0001.587] E> eeprom: Retry to read I2C slave device.
[0001.592] E> i2c dev read failed
[0001.596] E> eeprom: Failed to read I2C slave device
[0001.600] I> Eeprom read failed 0x1a89800d
[0001.605] I> Find /i2c@3160000's alias i2c0
[0001.609] I> Reading eeprom i2c=0 address=0x50
[0001.614] E> i2c dev read failed
[0001.617] E> eeprom: Failed to read I2C slave device
[0001.622] I> Eeprom read failed 0x1a89800d
[0001.627] I> Find /i2c@3180000's alias i2c2
[0001.631] I> Reading eeprom i2c=2 address=0x54
[0001.635] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.640] C> GPIO driver for chip_id 0x2 could not be found
[0001.645] E> cam_eeprom_read: Can't get gpio driver
[0001.650] I> Eeprom read failed 0x2693400d
[0001.654] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.659] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.674] I> found one nvdisp nodes at offset = 104564
[0001.679] I> found one nvdisp nodes at offset = 105480
[0001.684] I> found one nvdisp nodes at offset = 106284
[0001.689] I> no valid display unit config found in dtb
[0001.694] W> display init failed
[0001.697] initializing target
[0001.700] calling apps_init()
[0001.703] starting app android_boot_app
[0001.707] I> Gpio keyboard init success
[0001.711] I> Kernel type = Normal
[0001.714] I> Loading kernel/boot.img from storage ...
[0001.719] W> No valid slot number is found in scratch register
[0001.724] W> Return default slot: _a
[0001.728] I> A/B: bin_type (0) slot 0
[0001.731] I> Loading partition kernel at 0xa8000000
[0002.523] I> tegrabl_auth_payload: partition kernel (bin_type 0)
[0002.530] W> No valid slot number is found in scratch register
[0002.536] W> Return default slot: _a
[0002.539] I> A/B: bin_type (1) slot 0
[0002.543] I> Loading partition kernel-dtb at 0x92000000
[0002.555] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1)
[0002.561] C> ERROR: Highest Layer Module = 0x1d, Lowest Layer Module = 0x40,
Aux Info = 0x0, Reason = 0xd
[0黐0000.205] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.214] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.219] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.223] I> bit @ 0xd480000
[0000.226] I> BR-BCT relocated to 0xd7020000
[0000.230] I> Boot-device: eMMC
[0000.234] I> sdmmc bdev is already initialized
[0000.239] I> pmic: reset reason (nverc)        : 0x0
[0000.243] I> Reading GPT from 512 for device 00000003
[0000.249] I> Reading GPT from 8388096 for device 00000003
[0000.256] I> Found 13 partitions in 00000003 device
[0000.261] I> Reading GPT from 512 for device 00010003
[0000.267] I> Found 29 partitions in 00010003 device
[0000.273] W> No valid slot number is found in scratch register
[0000.278] W> Return default slot: _a
[0000.282] I> A/B: bin_type (16) slot 0
[0000.285] I> Loading partition bpmp-fw at 0xd7800000
[0000.290] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.296] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.311] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.316] W> No valid slot number is found in scratch register
[0000.322] W> Return default slot: _a
[0000.325] I> A/B: bin_type (17) slot 0
[0000.329] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.334] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.340] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.353] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.531] I> BPMP-FW load address = 0xd7800000
[0000.536] I> BPMP-FW DTB load address = 0x5018e200
[0000.540] I> Loading SCE-FW ...
[0000.543] W> No valid slot number is found in scratch register
[0000.549] W> Return default slot: _a
[0000.553] I> A/B: bin_type (12) slot 0
[0000.556] I> Loading partition sce-fw at 0xd7300000
[0000.561] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.566] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.575] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.581] I> Init SCE
[0000.583] I> Copy BTCM section
[0000.586] W> No valid slot number is found in scratch register
[0000.592] W> Return default slot: _a
[0000.595] I> A/B: bin_type (13) slot 0
[0000.599] I> Loading partition cpu-bootloader at 0x96000000
[0000.604] I> Reading two headers - addr:0x96000000 blocks:1
[0000.609] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.621] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.627] W> No valid slot number is found in scratch register
[0000.632] W> Return default slot: _a
[0000.636] I> A/B: bin_type (20) slot 0
[0000.639] I> Loading partition bootloader-dtb at 0x8520f400
[0000.645] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.650] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.662] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.667] I> MB2-params(VA) @ 0xd7000000
[0000.671] I> CPUBL-params(VA) @ 0xd7000000
[0000.675] I> CPUBL-params(PA) @ 0x277000000
[0000.679] I> CPU-BL loaded @ PA 0x96000000
[0000.683] I> Loading TOS ...
[0000.686] W> No valid slot number is found in scratch register
[0000.691] W> Return default slot: _a
[0000.695] I> A/B: bin_type (14) slot 0
[0000.699] I> Loading partition secure-os at 0x8530f600
[0000.704] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.709] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.717] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.723] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.730] I> Erasing Monitor @ 0x8530f800
[0000.735] I> Unhalting SCE
[0000.737] I> Primary Memory Start:80000000 Size:70000000
[0000.743] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.749] I> Waypoint2-ACK: 0x52012714
[0000.753] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.994] I> Welcome to Cboot
[0000.997] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0001.002] I> CPU-BL Params @ 0x277000000
[0001.006] I>  0) Base:0x00000000 Size:0x00000000
[0001.010] I>  1) Base:0x277f00000 Size:0x00100000
[0001.015] I>  2) Base:0x277e00000 Size:0x00100000
[0001.019] I>  3) Base:0x277d00000 Size:0x00100000
[0001.024] I>  4) Base:0x277c00000 Size:0x00100000
[0001.028] I>  5) Base:0x277b00000 Size:0x00100000
[0001.033] I>  6) Base:0x277800000 Size:0x00200000
[0001.037] I>  7) Base:0x277400000 Size:0x00400000
[0001.042] I>  8) Base:0x277a00000 Size:0x00100000
[0001.046] I>  9) Base:0x277300000 Size:0x00100000
[0001.051] I> 10) Base:0x276800000 Size:0x00800000
[0001.056] I> 11) Base:0x30000000 Size:0x00040000
[0001.060] I> 12) Base:0xf0000000 Size:0x00100000
[0001.064] I> 13) Base:0x30040000 Size:0x00001000
[0001.069] I> 14) Base:0x30048000 Size:0x00001000
[0001.073] I> 15) Base:0x30049000 Size:0x00001000
[0001.078] I> 16) Base:0x3004a000 Size:0x00001000
[0001.082] I> 17) Base:0x3004b000 Size:0x00001000
[0001.087] I> 18) Base:0x3004c000 Size:0x00001000
[0001.091] I> 19) Base:0x3004d000 Size:0x00001000
[0001.095] I> 20) Base:0x3004e000 Size:0x00001000
[0001.100] I> 21) Base:0x3004f000 Size:0x00001000
[0001.104] I> 22) Base:0x00000000 Size:0x00000000
[0001.109] I> 23) Base:0xf0100000 Size:0x00010000
[0001.113] I> 24) Base:0x00000000 Size:0x00000000
[0001.118] I> 25) Base:0x00000000 Size:0x00000000
[0001.122] I> 26) Base:0x00000000 Size:0x00000000
[0001.126] I> 27) Base:0x00000000 Size:0x00000000
[0001.131] I> 28) Base:0x84400000 Size:0x00400000
[0001.135] I> 29) Base:0x30000000 Size:0x00010000
[0001.140] I> 30) Base:0x278000000 Size:0x08000000
[0001.144] I> 31) Base:0x00000000 Size:0x00000000
[0001.149] I> 32) Base:0x276000000 Size:0x00600000
[0001.153] I> 33) Base:0x80000000 Size:0x70000000
[0001.158] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.162] I> 35) Base:0x00000000 Size:0x00000000
[0001.167] I> 36) Base:0x00000000 Size:0x00000000
[0001.171] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.176] I> 38) Base:0x84000000 Size:0x00400000
[0001.180] I> 39) Base:0x96000000 Size:0x02400000
[0001.184] I> 40) Base:0x85000000 Size:0x01200000
[0001.189] I> 41) Base:0x277000000 Size:0x00280000
[0001.193] I> 42) Base:0x00000000 Size:0x00000000
[0001.198] I> 43) Base:0x00000000 Size:0x00000000
[0001.202] GIC-SPI Target CPU: 4
[0001.206] Interrupts Init done
[0001.209] calling constructors
[0001.212] initializing heap
[0001.215] initializing threads
[0001.218] initializing timers
[0001.221] creating bootstrap completion thread
[0001.226] top of bootstrap2()
[0001.229] CPU: ARM Cortex A57
[0001.232] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.237] initializing platform
[0001.241] I> Boot-device: eMMC
[0001.245] I> sdmmc bdev is already initialized
[0001.249] I> Reading GPT from 512 for device 00000003
[0001.255] I> Reading GPT from 8388096 for device 00000003
[0001.262] I> Found 13 partitions in 00000003 device
[0001.266] I> Reading GPT from 512 for device 00010003
[0001.272] I> Found 29 partitions in 00010003 device
[0001.277] W> opt-in fuse is not set, skip fuse_burning
[0001.282] I> Bl_dtb @0x8520f400
[0001.285] I> gpio framework initialized
[0001.288] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.296] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.303] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.312] E> i2c dev write failed
[0001.315] E> tca9539_device_init: failed to write polar reg
[0001.321] E> tegrabl_tca9539_init: failed to init device!
[0001.326] E> GPIO TCA9539 driver init failed
[0001.448] I> decompressor handler not found
[0001.455] I> fixed regulator driver initialized
[0001.492] I> register 'maxim' power off handle
[0001.498] I> virtual i2c enabled
[0001.501] I> registered 'maxim,max77620' pmic
[0001.505] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.516] I> Find /i2c@c250000's alias i2c7
[0001.520] I> Reading eeprom i2c=7 address=0x50
[0001.552] I> Device at /i2c@c250000:0x50
[0001.555] I> Reading eeprom i2c=7 address=0x57
[0001.561] E> i2c dev read failed
[0001.564] E> eeprom: Failed to read I2C slave device
[0001.568] I> Eeprom read failed 0x1a89800d
[0001.573] I> Find /i2c@c240000's alias i2c1
[0001.577] I> Reading eeprom i2c=1 address=0x51
[0001.584] E> i2c dev read failed
[0001.587] E> eeprom: Retry to read I2C slave device.
[0001.593] E> i2c dev read failed
[0001.596] E> eeprom: Failed to read I2C slave device
[0001.601] I> Eeprom read failed 0x1a89800d
[0001.605] I> Find /i2c@3160000's alias i2c0
[0001.609] I> Reading eeprom i2c=0 address=0x50
[0001.615] E> i2c dev read failed
[0001.618] E> eeprom: Failed to read I2C slave device
[0001.622] I> Eeprom read failed 0x1a89800d
[0001.627] I> Find /i2c@3180000's alias i2c2
[0001.631] I> Reading eeprom i2c=2 address=0x54
[0001.635] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.640] C> GPIO driver for chip_id 0x2 could not be found
[0001.646] E> cam_eeprom_read: Can't get gpio driver
[0001.650] I> Eeprom read failed 0x2693400d
[0001.654] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.659] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.674] I> found one nvdisp nodes at offset = 104564
[0001.679] I> found one nvdisp nodes at offset = 105480
[0001.684] I> found one nvdisp nodes at offset = 106284
[0001.689] I> no valid display unit config found in dtb
[0001.694] W> display init failed
[0001.697] initializing target
[0001.700] calling apps_init()
[0001.703] starting app android_boot_app
[0001.708] I> Gpio keyboard init success
[0001.711] I> Kernel type = Normal
[0001.714] I> Loading kernel/boot.img from storage ...
[0001.719] W> No valid slot number is found in scratch register
[0001.725] W> Return default slot: _a
[0001.728] I> A/B: bin_type (0) slot 0
[0001.732] I> Loading partition kernel at 0xa8000000
[0002.523] I> tegrabl_auth_payload: partition kernel (bin_type 0)
[0002.531] W> No valid slot number is found in scratch register
[0002.536] W> Return default slot: _a
[0002.540] I> A/B: bin_type (1) slot 0
[0002.543] I> Loading partition kernel-dtb at 0x92000000
[0002.555] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1)
[0002.562] C> ERROR: Highest Layer Module = 0x1d, Lowest Layer Module = 0x40,
Aux Info = 0x0, Reason = 0xd
[0鳾0000.205] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.214] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.219] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.223] I> bit @ 0xd480000
[0000.226] I> BR-BCT relocated to 0xd7020000
[0000.230] I> Boot-device: eMMC
[0000.234] I> sdmmc bdev is already initialized
[0000.239] I> pmic: reset reason (nverc)        : 0x0
[0000.243] I> Reading GPT from 512 for device 00000003
[0000.249] I> Reading GPT from 8388096 for device 00000003
[0000.256] I> Found 13 partitions in 00000003 device
[0000.261] I> Reading GPT from 512 for device 00010003
[0000.267] I> Found 29 partitions in 00010003 device
[0000.273] W> No valid slot number is found in scratch register
[0000.278] W> Return default slot: _a
[0000.282] I> A/B: bin_type (16) slot 0
[0000.285] I> Loading partition bpmp-fw at 0xd7800000
[0000.290] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.296] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.311] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.316] W> No valid slot number is found in scratch register
[0000.322] W> Return default slot: _a
[0000.325] I> A/B: bin_type (17) slot 0
[0000.329] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.334] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.340] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.353] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.531] I> BPMP-FW load address = 0xd7800000
[0000.536] I> BPMP-FW DTB load address = 0x5018e200
[0000.540] I> Loading SCE-FW ...
[0000.543] W> No valid slot number is found in scratch register
[0000.549] W> Return default slot: _a
[0000.553] I> A/B: bin_type (12) slot 0
[0000.556] I> Loading partition sce-fw at 0xd7300000
[0000.561] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.566] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.575] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.581] I> Init SCE
[0000.583] I> Copy BTCM section
[0000.586] W> No valid slot number is found in scratch register
[0000.592] W> Return default slot: _a
[0000.595] I> A/B: bin_type (13) slot 0
[0000.599] I> Loading partition cpu-bootloader at 0x96000000
[0000.604] I> Reading two headers - addr:0x96000000 blocks:1
[0000.610] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.621] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.627] W> No valid slot number is found in scratch register
[0000.632] W> Return default slot: _a
[0000.636] I> A/B: bin_type (20) slot 0
[0000.639] I> Loading partition bootloader-dtb at 0x8520f400
[0000.645] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.650] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.662] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.667] I> MB2-params(VA) @ 0xd7000000
[0000.671] I> CPUBL-params(VA) @ 0xd7000000
[0000.675] I> CPUBL-params(PA) @ 0x277000000
[0000.679] I> CPU-BL loaded @ PA 0x96000000
[0000.683] I> Loading TOS ...
[0000.686] W> No valid slot number is found in scratch register
[0000.692] W> Return default slot: _a
[0000.695] I> A/B: bin_type (14) slot 0
[0000.699] I> Loading partition secure-os at 0x8530f600
[0000.704] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.709] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.718] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.723] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.730] I> Erasing Monitor @ 0x8530f800
[0000.735] I> Unhalting SCE
[0000.737] I> Primary Memory Start:80000000 Size:70000000
[0000.743] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.749] I> Waypoint2-ACK: 0x52012714
[0000.753] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.994] I> Welcome to Cboot
[0000.996] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0001.002] I> CPU-BL Params @ 0x277000000
[0001.005] I>  0) Base:0x00000000 Size:0x00000000
[0001.010] I>  1) Base:0x277f00000 Size:0x00100000
[0001.014] I>  2) Base:0x277e00000 Size:0x00100000
[0001.019] I>  3) Base:0x277d00000 Size:0x00100000
[0001.023] I>  4) Base:0x277c00000 Size:0x00100000
[0001.028] I>  5) Base:0x277b00000 Size:0x00100000
[0001.032] I>  6) Base:0x277800000 Size:0x00200000
[0001.037] I>  7) Base:0x277400000 Size:0x00400000
[0001.041] I>  8) Base:0x277a00000 Size:0x00100000
[0001.046] I>  9) Base:0x277300000 Size:0x00100000
[0001.050] I> 10) Base:0x276800000 Size:0x00800000
[0001.055] I> 11) Base:0x30000000 Size:0x00040000
[0001.059] I> 12) Base:0xf0000000 Size:0x00100000
[0001.064] I> 13) Base:0x30040000 Size:0x00001000
[0001.068] I> 14) Base:0x30048000 Size:0x00001000
[0001.073] I> 15) Base:0x30049000 Size:0x00001000
[0001.077] I> 16) Base:0x3004a000 Size:0x00001000
[0001.081] I> 17) Base:0x3004b000 Size:0x00001000
[0001.086] I> 18) Base:0x3004c000 Size:0x00001000
[0001.090] I> 19) Base:0x3004d000 Size:0x00001000
[0001.095] I> 20) Base:0x3004e000 Size:0x00001000
[0001.099] I> 21) Base:0x3004f000 Size:0x00001000
[0001.104] I> 22) Base:0x00000000 Size:0x00000000
[0001.108] I> 23) Base:0xf0100000 Size:0x00010000
[0001.113] I> 24) Base:0x00000000 Size:0x00000000
[0001.117] I> 25) Base:0x00000000 Size:0x00000000
[0001.121] I> 26) Base:0x00000000 Size:0x00000000
[0001.126] I> 27) Base:0x00000000 Size:0x00000000
[0001.130] I> 28) Base:0x84400000 Size:0x00400000
[0001.135] I> 29) Base:0x30000000 Size:0x00010000
[0001.139] I> 30) Base:0x278000000 Size:0x08000000
[0001.144] I> 31) Base:0x00000000 Size:0x00000000
[0001.148] I> 32) Base:0x276000000 Size:0x00600000
[0001.153] I> 33) Base:0x80000000 Size:0x70000000
[0001.157] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.162] I> 35) Base:0x00000000 Size:0x00000000
[0001.166] I> 36) Base:0x00000000 Size:0x00000000
[0001.170] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.175] I> 38) Base:0x84000000 Size:0x00400000
[0001.179] I> 39) Base:0x96000000 Size:0x02400000
[0001.184] I> 40) Base:0x85000000 Size:0x01200000
[0001.188] I> 41) Base:0x277000000 Size:0x00280000
[0001.193] I> 42) Base:0x00000000 Size:0x00000000
[0001.197] I> 43) Base:0x00000000 Size:0x00000000
[0001.202] GIC-SPI Target CPU: 4
[0001.205] Interrupts Init done
[0001.208] calling constructors
[0001.211] initializing heap
[0001.214] initializing threads
[0001.217] initializing timers
[0001.221] creating bootstrap completion thread
[0001.225] top of bootstrap2()
[0001.228] CPU: ARM Cortex A57
[0001.232] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.237] initializing platform
[0001.240] I> Boot-device: eMMC
[0001.244] I> sdmmc bdev is already initialized
[0001.249] I> Reading GPT from 512 for device 00000003
[0001.254] I> Reading GPT from 8388096 for device 00000003
[0001.261] I> Found 13 partitions in 00000003 device
[0001.266] I> Reading GPT from 512 for device 00010003
[0001.272] I> Found 29 partitions in 00010003 device
[0001.276] W> opt-in fuse is not set, skip fuse_burning
[0001.281] I> Bl_dtb @0x8520f400
[0001.284] I> gpio framework initialized
[0001.288] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.295] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.303] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.311] E> i2c dev write failed
[0001.315] E> tca9539_device_init: failed to write polar reg
[0001.320] E> tegrabl_tca9539_init: failed to init device!
[0001.325] E> GPIO TCA9539 driver init failed
[0001.448] I> decompressor handler not found
[0001.455] I> fixed regulator driver initialized
[0001.491] I> register 'maxim' power off handle
[0001.497] I> virtual i2c enabled
[0001.500] I> registered 'maxim,max77620' pmic
[0001.505] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.516] I> Find /i2c@c250000's alias i2c7
[0001.520] I> Reading eeprom i2c=7 address=0x50
[0001.551] I> Device at /i2c@c250000:0x50
[0001.555] I> Reading eeprom i2c=7 address=0x57
[0001.560] E> i2c dev read failed
[0001.563] E> eeprom: Failed to read I2C slave device
[0001.568] I> Eeprom read failed 0x1a89800d
[0001.572] I> Find /i2c@c240000's alias i2c1
[0001.576] I> Reading eeprom i2c=1 address=0x51
[0001.584] E> i2c dev read failed
[0001.587] E> eeprom: Retry to read I2C slave device.
[0001.592] E> i2c dev read failed
[0001.595] E> eeprom: Failed to read I2C slave device
[0001.600] I> Eeprom read failed 0x1a89800d
[0001.605] I> Find /i2c@3160000's alias i2c0
[0001.609] I> Reading eeprom i2c=0 address=0x50
[0001.614] E> i2c dev read failed
[0001.617] E> eeprom: Failed to read I2C slave device
[0001.622] I> Eeprom read failed 0x1a89800d
[0001.627] I> Find /i2c@3180000's alias i2c2
[0001.631] I> Reading eeprom i2c=2 address=0x54
[0001.635] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.640] C> GPIO driver for chip_id 0x2 could not be found
[0001.645] E> cam_eeprom_read: Can't get gpio driver
[0001.650] I> Eeprom read failed 0x2693400d
[0001.654] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.659] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.673] I> found one nvdisp nodes at offset = 104564
[0001.679] I> found one nvdisp nodes at offset = 105480
[0001.684] I> found one nvdisp nodes at offset = 106284
[0001.689] I> no valid display unit config found in dtb
[0001.694] W> display init failed
[0001.697] initializing target
[0001.700] calling apps_init()
[0001.703] starting app android_boot_app
[0001.707] I> Gpio keyboard init success
[0001.711] I> Kernel type = Normal
[0001.714] I> Loading kernel/boot.img from storage ...
[0001.719] W> No valid slot number is found in scratch register
[0001.724] W> Return default slot: _a
[0001.728] I> A/B: bin_type (0) slot 0
[0001.731] I> Loading partition kernel at 0xa8000000
[0002.523] I> tegrabl_auth_payload: partition kernel (bin_type 0)
[0002.530] W> No valid slot number is found in scratch register
[0002.536] W> Return default slot: _a
[0002.539] I> A/B: bin_type (1) slot 0
[0002.543] I> Loading partition kernel-dtb at 0x92000000
[0002.555] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1)
[0002.561] C> ERROR: Highest Layer Module = 0x1d, Lowest Layer Module = 0x40,
Aux Info = 0x0, Reason = 0xd
[00000.205] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.214] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.218] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.223] I> bit @ 0xd480000
[0000.226] I> BR-BCT relocated to 0xd7020000
[0000.230] I> Boot-device: eMMC
[0000.234] I> sdmmc bdev is already initialized
[0000.239] I> pmic: reset reason (nverc)        : 0x0
[0000.243] I> Reading GPT from 512 for device 00000003
[0000.249] I> Reading GPT from 8388096 for device 00000003
[0000.256] I> Found 13 partitions in 00000003 device
[0000.261] I> Reading GPT from 512 for device 00010003
[0000.267] I> Found 29 partitions in 00010003 device
[0000.273] W> No valid slot number is found in scratch register
[0000.278] W> Return default slot: _a
[0000.282] I> A/B: bin_type (16) slot 0
[0000.285] I> Loading partition bpmp-fw at 0xd7800000
[0000.290] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.296] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.311] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.316] W> No valid slot number is found in scratch register
[0000.322] W> Return default slot: _a
[0000.325] I> A/B: bin_type (17) slot 0
[0000.329] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.334] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.340] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.353] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.532] I> BPMP-FW load address = 0xd7800000
[0000.537] I> BPMP-FW DTB load address = 0x5018e200
[0000.542] I> Loading SCE-FW ...
[0000.544] W> No valid slot number is found in scratch register
[0000.550] W> Return default slot: _a
[0000.554] I> A/B: bin_type (12) slot 0
[0000.557] I> Loading partition sce-fw at 0xd7300000
[0000.562] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.567] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.576] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.582] I> Init SCE
[0000.584] I> Copy BTCM section
[0000.587] W> No valid slot number is found in scratch register
[0000.593] W> Return default slot: _a
[0000.596] I> A/B: bin_type (13) slot 0
[0000.600] I> Loading partition cpu-bootloader at 0x96000000
[0000.605] I> Reading two headers - addr:0x96000000 blocks:1
[0000.611] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.622] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.628] W> No valid slot number is found in scratch register
[0000.633] W> Return default slot: _a
[0000.637] I> A/B: bin_type (20) slot 0
[0000.640] I> Loading partition bootloader-dtb at 0x8520f400
[0000.646] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.651] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.663] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.668] I> MB2-params(VA) @ 0xd7000000
[0000.672] I> CPUBL-params(VA) @ 0xd7000000
[0000.676] I> CPUBL-params(PA) @ 0x277000000
[0000.680] I> CPU-BL loaded @ PA 0x96000000
[0000.684] I> Loading TOS ...
[0000.687] W> No valid slot number is found in scratch register
[0000.693] W> Return default slot: _a
[0000.696] I> A/B: bin_type (14) slot 0
[0000.700] I> Loading partition secure-os at 0x8530f600
[0000.705] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.710] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.719] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.724] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.731] I> Erasing Monitor @ 0x8530f800
[0000.736] I> Unhalting SCE
[0000.738] I> Primary Memory Start:80000000 Size:70000000
[0000.744] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.750] I> Waypoint2-ACK: 0x52012714
[0000.754] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.995] I> Welcome to Cboot
[0000.998] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0001.003] I> CPU-BL Params @ 0x277000000
[0001.007] I>  0) Base:0x00000000 Size:0x00000000
[0001.011] I>  1) Base:0x277f00000 Size:0x00100000
[0001.016] I>  2) Base:0x277e00000 Size:0x00100000
[0001.020] I>  3) Base:0x277d00000 Size:0x00100000
[0001.025] I>  4) Base:0x277c00000 Size:0x00100000
[0001.029] I>  5) Base:0x277b00000 Size:0x00100000
[0001.034] I>  6) Base:0x277800000 Size:0x00200000
[0001.038] I>  7) Base:0x277400000 Size:0x00400000
[0001.043] I>  8) Base:0x277a00000 Size:0x00100000
[0001.047] I>  9) Base:0x277300000 Size:0x00100000
[0001.052] I> 10) Base:0x276800000 Size:0x00800000
[0001.056] I> 11) Base:0x30000000 Size:0x00040000
[0001.061] I> 12) Base:0xf0000000 Size:0x00100000
[0001.065] I> 13) Base:0x30040000 Size:0x00001000
[0001.070] I> 14) Base:0x30048000 Size:0x00001000
[0001.074] I> 15) Base:0x30049000 Size:0x00001000
[0001.079] I> 16) Base:0x3004a000 Size:0x00001000
[0001.083] I> 17) Base:0x3004b000 Size:0x00001000
[0001.087] I> 18) Base:0x3004c000 Size:0x00001000
[0001.092] I> 19) Base:0x3004d000 Size:0x00001000
[0001.096] I> 20) Base:0x3004e000 Size:0x00001000
[0001.101] I> 21) Base:0x3004f000 Size:0x00001000
[0001.105] I> 22) Base:0x00000000 Size:0x00000000
[0001.110] I> 23) Base:0xf0100000 Size:0x00010000
[0001.114] I> 24) Base:0x00000000 Size:0x00000000
[0001.118] I> 25) Base:0x00000000 Size:0x00000000
[0001.123] I> 26) Base:0x00000000 Size:0x00000000
[0001.127] I> 27) Base:0x00000000 Size:0x00000000
[0001.132] I> 28) Base:0x84400000 Size:0x00400000
[0001.136] I> 29) Base:0x30000000 Size:0x00010000
[0001.141] I> 30) Base:0x278000000 Size:0x08000000
[0001.145] I> 31) Base:0x00000000 Size:0x00000000
[0001.150] I> 32) Base:0x276000000 Size:0x00600000
[0001.154] I> 33) Base:0x80000000 Size:0x70000000
[0001.158] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.163] I> 35) Base:0x00000000 Size:0x00000000
[0001.167] I> 36) Base:0x00000000 Size:0x00000000
[0001.172] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.176] I> 38) Base:0x84000000 Size:0x00400000
[0001.181] I> 39) Base:0x96000000 Size:0x02400000
[0001.185] I> 40) Base:0x85000000 Size:0x01200000
[0001.190] I> 41) Base:0x277000000 Size:0x00280000
[0001.194] I> 42) Base:0x00000000 Size:0x00000000
[0001.199] I> 43) Base:0x00000000 Size:0x00000000
[0001.203] GIC-SPI Target CPU: 4
[0001.206] Interrupts Init done
[0001.210] calling constructors
[0001.213] initializing heap
[0001.216] initializing threads
[0001.219] initializing timers
[0001.222] creating bootstrap completion thread
[0001.227] top of bootstrap2()
[0001.230] CPU: ARM Cortex A57
[0001.233] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.238] initializing platform
[0001.242] I> Boot-device: eMMC
[0001.246] I> sdmmc bdev is already initialized
[0001.250] I> Reading GPT from 512 for device 00000003
[0001.256] I> Reading GPT from 8388096 for device 00000003
[0001.262] I> Found 13 partitions in 00000003 device
[0001.267] I> Reading GPT from 512 for device 00010003
[0001.273] I> Found 29 partitions in 00010003 device
[0001.278] W> opt-in fuse is not set, skip fuse_burning
[0001.283] I> Bl_dtb @0x8520f400
[0001.286] I> gpio framework initialized
[0001.289] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.297] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.304] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.313] E> i2c dev write failed
[0001.316] E> tca9539_device_init: failed to write polar reg
[0001.322] E> tegrabl_tca9539_init: failed to init device!
[0001.327] E> GPIO TCA9539 driver init failed
[0001.449] I> decompressor handler not found
[0001.456] I> fixed regulator driver initialized
[0001.493] I> register 'maxim' power off handle
[0001.499] I> virtual i2c enabled
[0001.502] I> registered 'maxim,max77620' pmic
[0001.506] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.517] I> Find /i2c@c250000's alias i2c7
[0001.521] I> Reading eeprom i2c=7 address=0x50
[0001.552] I> Device at /i2c@c250000:0x50
[0001.556] I> Reading eeprom i2c=7 address=0x57
[0001.561] E> i2c dev read failed
[0001.564] E> eeprom: Failed to read I2C slave device
[0001.569] I> Eeprom read failed 0x1a89800d
[0001.574] I> Find /i2c@c240000's alias i2c1
[0001.578] I> Reading eeprom i2c=1 address=0x51
[0001.585] E> i2c dev read failed
[0001.588] E> eeprom: Retry to read I2C slave device.
[0001.594] E> i2c dev read failed
[0001.597] E> eeprom: Failed to read I2C slave device
[0001.602] I> Eeprom read failed 0x1a89800d
[0001.606] I> Find /i2c@3160000's alias i2c0
[0001.610] I> Reading eeprom i2c=0 address=0x50
[0001.615] E> i2c dev read failed
[0001.618] E> eeprom: Failed to read I2C slave device
[0001.623] I> Eeprom read failed 0x1a89800d
[0001.628] I> Find /i2c@3180000's alias i2c2
[0001.632] I> Reading eeprom i2c=2 address=0x54
[0001.636] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.641] C> GPIO driver for chip_id 0x2 could not be found
[0001.646] E> cam_eeprom_read: Can't get gpio driver
[0001.651] I> Eeprom read failed 0x2693400d
[0001.655] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.660] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.675] I> found one nvdisp nodes at offset = 104564
[0001.680] I> found one nvdisp nodes at offset = 105480
[0001.685] I> found one nvdisp nodes at offset = 106284
[0001.690] I> no valid display unit config found in dtb
[0001.695] W> display init failed
[0001.698] initializing target
[0001.701] calling apps_init()
[0001.704] starting app android_boot_app
[0001.708] I> Gpio keyboard init success
[0001.712] I> Kernel type = Normal
[0001.715] I> Loading kernel/boot.img from storage ...
[0001.720] W> No valid slot number is found in scratch register
[0001.726] W> Return default slot: _a
[0001.729] I> A/B: bin_type (0) slot 0
[0001.733] I> Loading partition kernel at 0xa8000000
[0002.524] I> tegrabl_auth_payload: partition kernel (bin_type 0)
[0002.532] W> No valid slot number is found in scratch register
[0002.537] W> Return default slot: _a
[0002.541] I> A/B: bin_type (1) slot 0
[0002.544] I> Loading partition kernel-dtb at 0x92000000
[0002.556] I> tegrabl_auth_payload: partition kernel-dtb (bin_type 1)
[0002.562] C> ERROR: Highest Layer Module = 0x1d, Lowest Layer Module = 0x40,
Aux Info = 0x0, Reason = 0xd
[00000.205] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-c4328dc3)
[0000.214] I> Default Heap @ [0xd486400 - 0xd488400]
[0000.219] I> DMA Heap @ [0x85200000 - 0x86200000]
[0000.223] I> bit @ 0xd480000
[0000.226] I> BR-BCT relocated to 0xd7020000
[0000.230] I> Boot-device: eMMC
[0000.234] I> sdmmc bdev is already initialized
[0000.239] I> pmic: reset reason (nverc)        : 0x0
[0000.243] I> Reading GPT from 512 for device 00000003
[0000.249] I> Reading GPT from 8388096 for device 00000003
[0000.256] I> Found 13 partitions in 00000003 device
[0000.261] I> Reading GPT from 512 for device 00010003
[0000.267] I> Found 29 partitions in 00010003 device
[0000.273] W> No valid slot number is found in scratch register
[0000.278] W> Return default slot: _a
[0000.282] I> A/B: bin_type (16) slot 0
[0000.285] I> Loading partition bpmp-fw at 0xd7800000
[0000.290] I> Reading two headers - addr:0xd7800000 blocks:1
[0000.296] I> Addr: 0xd7800000, start-block: 58761217, num_blocks: 1
[0000.311] I> Binary(16) of size 529040 is loaded @ 0xd7800000
[0000.316] W> No valid slot number is found in scratch register
[0000.322] W> Return default slot: _a
[0000.325] I> A/B: bin_type (17) slot 0
[0000.329] I> Loading partition bpmp-fw-dtb at 0xd79f0000
[0000.334] I> Reading two headers - addr:0xd79f0000 blocks:1
[0000.340] I> Addr: 0xd79f0000, start-block: 58763633, num_blocks: 1
[0000.353] I> Binary(17) of size 465760 is loaded @ 0xd798e200
[0000.531] I> BPMP-FW load address = 0xd7800000
[0000.536] I> BPMP-FW DTB load address = 0x5018e200
[0000.540] I> Loading SCE-FW ...
[0000.543] W> No valid slot number is found in scratch register
[0000.549] W> Return default slot: _a
[0000.553] I> A/B: bin_type (12) slot 0
[0000.556] I> Loading partition sce-fw at 0xd7300000
[0000.561] I> Reading two headers - addr:0xd7300000 blocks:1
[0000.566] I> Addr: 0xd7300000, start-block: 58765633, num_blocks: 1
[0000.575] I> Binary(12) of size 76592 is loaded @ 0xd7300000
[0000.581] I> Init SCE
[0000.583] I> Copy BTCM section
[0000.586] W> No valid slot number is found in scratch register
[0000.592] W> Return default slot: _a
[0000.595] I> A/B: bin_type (13) slot 0
[0000.599] I> Loading partition cpu-bootloader at 0x96000000
[0000.604] I> Reading two headers - addr:0x96000000 blocks:1
[0000.610] I> Addr: 0x96000000, start-block: 58740737, num_blocks: 1
[0000.621] I> Binary(13) of size 282736 is loaded @ 0x96000000
[0000.627] W> No valid slot number is found in scratch register
[0000.632] W> Return default slot: _a
[0000.636] I> A/B: bin_type (20) slot 0
[0000.639] I> Loading partition bootloader-dtb at 0x8520f400
[0000.645] I> Reading two headers - addr:0x8520f400 blocks:1
[0000.650] I> Addr: 0x8520f400, start-block: 58742785, num_blocks: 1
[0000.662] I> Binary(20) of size 279456 is loaded @ 0x8520f400
[0000.667] I> MB2-params(VA) @ 0xd7000000
[0000.671] I> CPUBL-params(VA) @ 0xd7000000
[0000.675] I> CPUBL-params(PA) @ 0x277000000
[0000.679] I> CPU-BL loaded @ PA 0x96000000
[0000.683] I> Loading TOS ...
[0000.686] W> No valid slot number is found in scratch register
[0000.692] W> Return default slot: _a
[0000.695] I> A/B: bin_type (14) slot 0
[0000.699] I> Loading partition secure-os at 0x8530f600
[0000.704] I> Reading two headers - addr:0x8530f600 blocks:1
[0000.709] I> Addr: 0x8530f600, start-block: 58744833, num_blocks: 1
[0000.718] I> Binary(14) of size 62576 is loaded @ 0x8530f600
[0000.723] I> Copying Monitor (length: 0xf270) from 0x8530f800 to 0x40000000
[0000.730] I> Erasing Monitor @ 0x8530f800
[0000.735] I> Unhalting SCE
[0000.737] I> Primary Memory Start:80000000 Size:70000000
[0000.743] I> Extended Memory Start:f0110000 Size:185ef0000
[0000.749] I> Waypoint2-ACK: 0x52012714
[0000.753] I> MB2(TBoot-BPMP) done

NOTICE:  BL31: v1.2(release):e1e4477
NOTICE:  BL31: Built : 00:08:30, May 17 2018
NOTICE:  Trusty image missing.
ERROR:   Error initializing runtime service trusty_fast
[0000.994] I> Welcome to Cboot
[0000.997] I> Cboot Version: 00.00.2014.50-t186-0c600f85
[0001.002] I> CPU-BL Params @ 0x277000000
[0001.006] I>  0) Base:0x00000000 Size:0x00000000
[0001.010] I>  1) Base:0x277f00000 Size:0x00100000
[0001.015] I>  2) Base:0x277e00000 Size:0x00100000
[0001.019] I>  3) Base:0x277d00000 Size:0x00100000
[0001.024] I>  4) Base:0x277c00000 Size:0x00100000
[0001.028] I>  5) Base:0x277b00000 Size:0x00100000
[0001.033] I>  6) Base:0x277800000 Size:0x00200000
[0001.037] I>  7) Base:0x277400000 Size:0x00400000
[0001.042] I>  8) Base:0x277a00000 Size:0x00100000
[0001.046] I>  9) Base:0x277300000 Size:0x00100000
[0001.051] I> 10) Base:0x276800000 Size:0x00800000
[0001.055] I> 11) Base:0x30000000 Size:0x00040000
[0001.060] I> 12) Base:0xf0000000 Size:0x00100000
[0001.064] I> 13) Base:0x30040000 Size:0x00001000
[0001.069] I> 14) Base:0x30048000 Size:0x00001000
[0001.073] I> 15) Base:0x30049000 Size:0x00001000
[0001.078] I> 16) Base:0x3004a000 Size:0x00001000
[0001.082] I> 17) Base:0x3004b000 Size:0x00001000
[0001.086] I> 18) Base:0x3004c000 Size:0x00001000
[0001.091] I> 19) Base:0x3004d000 Size:0x00001000
[0001.095] I> 20) Base:0x3004e000 Size:0x00001000
[0001.100] I> 21) Base:0x3004f000 Size:0x00001000
[0001.104] I> 22) Base:0x00000000 Size:0x00000000
[0001.109] I> 23) Base:0xf0100000 Size:0x00010000
[0001.113] I> 24) Base:0x00000000 Size:0x00000000
[0001.117] I> 25) Base:0x00000000 Size:0x00000000
[0001.122] I> 26) Base:0x00000000 Size:0x00000000
[0001.126] I> 27) Base:0x00000000 Size:0x00000000
[0001.131] I> 28) Base:0x84400000 Size:0x00400000
[0001.135] I> 29) Base:0x30000000 Size:0x00010000
[0001.140] I> 30) Base:0x278000000 Size:0x08000000
[0001.144] I> 31) Base:0x00000000 Size:0x00000000
[0001.149] I> 32) Base:0x276000000 Size:0x00600000
[0001.153] I> 33) Base:0x80000000 Size:0x70000000
[0001.158] I> 34) Base:0xf0110000 Size:0x185ef0000
[0001.162] I> 35) Base:0x00000000 Size:0x00000000
[0001.166] I> 36) Base:0x00000000 Size:0x00000000
[0001.171] I> 37) Base:0x2772e0000 Size:0x00020000
[0001.175] I> 38) Base:0x84000000 Size:0x00400000
[0001.180] I> 39) Base:0x96000000 Size:0x02400000
[0001.184] I> 40) Base:0x85000000 Size:0x01200000
[0001.189] I> 41) Base:0x277000000 Size:0x00280000
[0001.193] I> 42) Base:0x00000000 Size:0x00000000
[0001.198] I> 43) Base:0x00000000 Size:0x00000000
[0001.202] GIC-SPI Target CPU: 4
[0001.205] Interrupts Init done
[0001.209] calling constructors
[0001.212] initializing heap
[0001.215] initializing threads
[0001.218] initializing timers
[0001.221] creating bootstrap completion thread
[0001.226] top of bootstrap2()
[0001.229] CPU: ARM Cortex A57
[0001.232] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
[0001.237] initializing platform
[0001.241] I> Boot-device: eMMC
[0001.245] I> sdmmc bdev is already initialized
[0001.249] I> Reading GPT from 512 for device 00000003
[0001.255] I> Reading GPT from 8388096 for device 00000003
[0001.261] I> Found 13 partitions in 00000003 device
[0001.266] I> Reading GPT from 512 for device 00010003
[0001.272] I> Found 29 partitions in 00010003 device
[0001.277] W> opt-in fuse is not set, skip fuse_burning
[0001.282] I> Bl_dtb @0x8520f400
[0001.285] I> gpio framework initialized
[0001.288] I> tegrabl_gpio_driver_register: register 'tegra_gpio_main_driver' driver
[0001.296] I> tegrabl_gpio_driver_register: register 'tegra_gpio_aon_driver' driver
[0001.303] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
[0001.312] E> i2c dev write failed
[0001.315] E> tca9539_device_init: failed to write polar reg
[0001.321] E> tegrabl_tca9539_init: failed to init device!
[0001.326] E> GPIO TCA9539 driver init failed
[0001.448] I> decompressor handler not found
[0001.455] I> fixed regulator driver initialized
[0001.492] I> register 'maxim' power off handle
[0001.498] I> virtual i2c enabled
[0001.501] I> registered 'maxim,max77620' pmic
[0001.505] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
[0001.516] I> Find /i2c@c250000's alias i2c7
[0001.520] I> Reading eeprom i2c=7 address=0x50
[0001.552] I> Device at /i2c@c250000:0x50
[0001.555] I> Reading eeprom i2c=7 address=0x57
[0001.561] E> i2c dev read failed
[0001.564] E> eeprom: Failed to read I2C slave device
[0001.568] I> Eeprom read failed 0x1a89800d
[0001.573] I> Find /i2c@c240000's alias i2c1
[0001.577] I> Reading eeprom i2c=1 address=0x51
[0001.584] E> i2c dev read failed
[0001.587] E> eeprom: Retry to read I2C slave device.
[0001.593] E> i2c dev read failed
[0001.596] E> eeprom: Failed to read I2C slave device
[0001.601] I> Eeprom read failed 0x1a89800d
[0001.605] I> Find /i2c@3160000's alias i2c0
[0001.609] I> Reading eeprom i2c=0 address=0x50
[0001.615] E> i2c dev read failed
[0001.618] E> eeprom: Failed to read I2C slave device
[0001.622] I> Eeprom read failed 0x1a89800d
[0001.627] I> Find /i2c@3180000's alias i2c2
[0001.631] I> Reading eeprom i2c=2 address=0x54
[0001.635] I> Enabling gpio chip_id = 2, gpio pin = 9
[0001.640] C> GPIO driver for chip_id 0x2 could not be found
[0001.646] E> cam_eeprom_read: Can't get gpio driver
[0001.650] I> Eeprom read failed 0x2693400d
[0001.654] I> create_pm_ids: id: 3310-1000-B01-D, len: 15
[0001.659] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
[0001.674] I> found one nvdisp nodes at offset = 104564
[0001.679] I> found one nvdisp nodes at offset = 105480
[0001.684] I> found one nvdisp nodes at offset = 106284
[0001.689] I> no valid display unit config found in dtb
[0001.694] W> display init failed
[0001.697] initializing target
[0001.700] calling apps_init()
[0001.703] starting app android_boot_app
[0001.708] I> Gpio keyboard init success
[0001.711] I> Kernel type = Normal
[0001.714] I> Loading kernel/boot.img from storage ...
[0001.719] W> No valid slot number is found in scratch register
[0001.725] W> Return default slot: _a
[0001.728] I> A/B: bin_type (0) slot 0
[0001.732] I> Loading partition kernel at 0xa8000000