=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.08.27 15:30:30 =~=~=~=~=~=~=~=~=~=~=~= [0000.358] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0000.377] I> Found 33 partitions in SDMMC_USER (instance 3) [0000.383] W> No valid slot number is found in scratch register [0000.388] W> Return default slot: _a [0000.392] I> A/B: bin_type (16) slot 0 [0000.395] I> Loading partition bpmp-fw at 0xd7800000 [0000.400] I> Reading two headers - addr:0xd7800000 blocks:1 [0000.406] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1 [0000.431] I> Binary(16) of size 533504 is loaded @ 0xd7800000 [0000.436] W> No valid slot number is found in scratch register [0000.442] W> Return default slot: _a [0000.445] I> A/B: bin_type (17) slot 0 [0000.449] I> Loading partition bpmp-fw-dtb at 0xd79f0000 [0000.454] I> Reading two headers - addr:0xd79f0000 blocks:1 [0000.460] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1 [0000.485] I> Binary(17) of size 604720 is loaded @ 0xd796c400 [0000.716] I> Loading SCE-FW ... [0000.719] W> No valid slot number is found in scratch register [0000.724] W> Return default slot: _a [0000.728] I> A/B: bin_type (12) slot 0 [0000.731] I> Loading partition sce-fw at 0xd7300000 [0000.736] I> Reading two headers - addr:0xd7300000 blocks:1 [0000.742] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1 [0000.761] I> Binary(12) of size 125168 is loaded @ 0xd7300000 [0000.766] I> Init SCE [0000.769] I> Loading APE-FW ... [0000.772] W> No valid slot number is found in scratch register [0000.778] W> Return default slot: _a [0000.781] I> A/B: bin_type (11) slot 0 [0000.785] I> Loading partition adsp-fw at 0xd7400000 [0000.789] I> Reading two headers - addr:0xd7400000 blocks:1 [0000.795] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1 [0000.814] I> Binary(11) of size 107808 is loaded @ 0xd7400000 [0000.820] I> Copy BTCM section [0000.823] W> No valid slot number is found in scratch register [0000.829] W> Return default slot: _a [0000.832] I> A/B: bin_type (13) slot 0 [0000.836] I> Loading partition cpu-bootloader at 0x96000000 [0000.841] I> Reading two headers - addr:0x96000000 blocks:1 [0000.846] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1 [0000.867] I> Binary(13) of size 284816 is loaded @ 0x96000000 [0000.873] W> No valid slot number is found in scratch register [0000.878] W> Return default slot: _a [0000.882] I> A/B: bin_type (20) slot 0 [0000.885] I> Loading partition bootloader-dtb at 0x8520f400 [0000.891] I> Reading two headers - addr:0x8520f400 blocks:1 [0000.896] I> Addr: 0x8520f400, start-block: 58742792, num_blocks: 1 [0000.916] I> Binary(20) of size 240128 is loaded @ 0x8520f400 [0000.922] W> No valid slot number is found in scratch register [0000.928] W> Return default slot: _a [0000.931] I> A/B: bin_type (14) slot 0 [0000.935] I> Loading partition secure-os at 0x8530f600 [0000.940] I> Reading two headers - addr:0x8530f600 blocks:1 [0000.945] I> Addr: 0x8530f600, start-block: 58744840, num_blocks: 1 [0000.967] I> Binary(14) of size 366000 is loaded @ 0x8530f600 [0000.975] I> TOS boot-params @ 0x85000000 [0000.979] I> TOS params prepared [0000.982] I> Loading EKS ... [0000.984] I> A/B: bin_type (15) slot 0 [0000.988] I> Loading partition eks at 0x8590f800 [0000.993] I> Reading two headers - addr:0x8590f800 blocks:1 [0000.998] I> Addr: 0x8590f800, start-block: 58757128, num_blocks: 1 [0001.017] I> Binary(15) of size 1040 is loaded @ 0x8590f800 [0001.022] I> EKB detected (length: 0x400) @ 0x8590f800 [0001.027] I> Copied encrypted keys [0001.031] I> boot profiler @ 0x275844000 [0001.035] I> boot profiler for TOS @ 0x275844000 [0001.040] I> Unhalting SCE [0001.042] I> Primary Memory Start:80000000 Size:70000000 [0001.048] I> Extended Memory Start:f0110000 Size:1856f0000 [0001.054] I> MB2(TBoot-BPMP) done NOTICE: BL31: v1.3(release):41d46a9cf NOTICE: BL31: Built : 21:14:44, Jun 25 2020 ipc-unittest-main: 1519: Welcome to IPC unittest!!! ipc-unittest-main: 1531: waiting forever ipc-unittest-srv: 329: Init unittest services!!! hwkey-agent: 40: hwkey-agent is running!! hwkey-agent: 182: key_mgnt_processing ....... hwkey-agent: 157: Init hweky-agent services!! platform_bootstrap_epilog: trusty bootstrap complete [0001.427] I> Welcome to Cboot [0001.430] I> Cboot Version: t186-02737b3e [0001.434] I> CPU-BL Params @ 0x275800000 [0001.438] I> 0) Base:0x00000000 Size:0x00000000 [0001.442] I> 1) Base:0x277f00000 Size:0x00100000 [0001.446] I> 2) Base:0x277e00000 Size:0x00100000 [0001.451] I> 3) Base:0x277d00000 Size:0x00100000 [0001.456] I> 4) Base:0x277c00000 Size:0x00100000 [0001.460] I> 5) Base:0x277b00000 Size:0x00100000 [0001.465] I> 6) Base:0x277800000 Size:0x00200000 [0001.469] I> 7) Base:0x277400000 Size:0x00400000 [0001.474] I> 8) Base:0x277a00000 Size:0x00100000 [0001.478] I> 9) Base:0x277300000 Size:0x00100000 [0001.483] I> 10) Base:0x276800000 Size:0x00800000 [0001.487] I> 11) Base:0x30000000 Size:0x00040000 [0001.492] I> 12) Base:0xf0000000 Size:0x00100000 [0001.496] I> 13) Base:0x30040000 Size:0x00001000 [0001.500] I> 14) Base:0x30048000 Size:0x00001000 [0001.505] I> 15) Base:0x30049000 Size:0x00001000 [0001.509] I> 16) Base:0x3004a000 Size:0x00001000 [0001.514] I> 17) Base:0x3004b000 Size:0x00001000 [0001.518] I> 18) Base:0x3004c000 Size:0x00001000 [0001.523] I> 19) Base:0x3004d000 Size:0x00001000 [0001.527] I> 20) Base:0x3004e000 Size:0x00001000 [0001.531] I> 21) Base:0x3004f000 Size:0x00001000 [0001.536] I> 22) Base:0x00000000 Size:0x00000000 [0001.540] I> 23) Base:0xf0100000 Size:0x00010000 [0001.545] I> 24) Base:0x00000000 Size:0x00000000 [0001.549] I> 25) Base:0x00000000 Size:0x00000000 [0001.554] I> 26) Base:0x00000000 Size:0x00000000 [0001.558] I> 27) Base:0x00000000 Size:0x00000000 [0001.562] I> 28) Base:0x84400000 Size:0x00400000 [0001.567] I> 29) Base:0x30000000 Size:0x00010000 [0001.571] I> 30) Base:0x278000000 Size:0x08000000 [0001.576] I> 31) Base:0x00000000 Size:0x00000000 [0001.580] I> 32) Base:0x276000000 Size:0x00600000 [0001.585] I> 33) Base:0x80000000 Size:0x70000000 [0001.589] I> 34) Base:0xf0110000 Size:0x1856f0000 [0001.594] I> 35) Base:0x00000000 Size:0x00000000 [0001.598] I> 36) Base:0x00000000 Size:0x00000000 [0001.603] I> 37) Base:0x2772e0000 Size:0x00020000 [0001.607] I> 38) Base:0x84000000 Size:0x00400000 [0001.612] I> 39) Base:0x96000000 Size:0x02000000 [0001.616] I> 40) Base:0x85000000 Size:0x01200000 [0001.620] I> 41) Base:0x275800000 Size:0x00500000 [0001.625] I> 42) Base:0x00000000 Size:0x00000000 [0001.629] I> 43) Base:0x00000000 Size:0x00000000 [0001.634] GIC-SPI Target CPU: 4 [0001.637] Interrupts Init done [0001.640] calling constructors [0001.644] initializing heap [0001.646] initializing threads [0001.649] initializing timers [0001.652] creating bootstrap completion thread [0001.657] top of bootstrap2() [0001.660] CPU: ARM Cortex A57 [0001.663] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100 [0001.668] initializing platform [0001.672] I> Bl_dtb @0x8520f400 [0001.675] I> gpio framework initialized [0001.680] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' driver [0001.689] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon' driver [0001.696] I> GPIO framework and drivers are initialized. [0001.702] I> Boot-device: eMMC [0001.709] I> sdmmc bdev is already initialized [0001.739] I> Found 19 partitions in SDMMC_BOOT (instance 3) [0001.757] I> Found 33 partitions in SDMMC_USER (instance 3) [0001.762] W> opt-in fuse is not set, skip fuse_burning [0001.767] I> Reserved memory at 0xfbe00000 for U-Boot relocation [0001.773] W> No valid slot number is found in scratch register [0001.779] W> Return default slot: _a [0001.782] I> A/B: bin_type (21) slot 0 [0001.785] I> Loading kernel-dtb from partition [0001.790] I> Loading partition kernel-dtb at 0x80000000 from device(0x1) [0001.807] I> Kernel_dtb @0x80000000 [0001.810] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee [0001.818] E> I2C: slave not found in slaves. [0001.823] E> I2C: Could not write 0 bytes to slave: 0x00ee with repeat start false. [0001.830] E> I2C_DEV: Failed to send register address 0x00000004. [0001.836] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xee at 0x00000004 via instance 0. [0001.845] E> tca9539_device_init: failed to write polar reg [0001.851] E> tegrabl_tca9539_init: failed to init device! [0001.856] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8 [0001.863] E> I2C: slave not found in slaves. [0001.867] E> I2C: Could not write 0 bytes to slave: 0x00e8 with repeat start false. [0001.875] E> I2C_DEV: Failed to send register address 0x00000004. [0001.881] E> I2C_DEV: Could not write 1 registers of size 1 to slave 0xe8 at 0x00000004 via instance 0. [0001.890] E> tca9539_device_init: failed to write polar reg [0001.895] E> tegrabl_tca9539_init: failed to init device! [0001.902] I> fixed regulator driver initialized [0001.926] I> register 'maxim' power off handle [0001.931] I> virtual i2c enabled [0001.934] I> registered 'maxim,max77620' pmic [0001.938] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver [0001.948] I> Find /i2c@c250000's alias i2c7 [0001.952] I> Reading eeprom i2c=7 address=0x50 [0001.981] I> Device at /i2c@c250000:0x50 [0001.985] I> Reading eeprom i2c=7 address=0x57 [0001.989] E> I2C: slave not found in slaves. [0001.994] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start true. [0002.001] E> I2C_DEV: Failed to send register address 0x00000000. [0002.007] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae at 0x00000000 via instance 7. [0002.017] E> eeprom: Failed to read I2C slave device [0002.021] I> Eeprom read failed 0x3526070d [0002.026] I> Find /i2c@c240000's alias i2c1 [0002.030] I> Reading eeprom i2c=1 address=0x51 [0002.035] E> I2C: slave not found in slaves. [0002.039] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.047] E> I2C_DEV: Failed to send register address 0x00000000. [0002.053] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.062] E> eeprom: Retry to read I2C slave device. [0002.067] E> I2C: slave not found in slaves. [0002.071] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start true. [0002.079] E> I2C_DEV: Failed to send register address 0x00000000. [0002.085] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 at 0x00000000 via instance 1. [0002.094] E> eeprom: Failed to read I2C slave device [0002.099] I> Eeprom read failed 0x3526070d [0002.104] I> Find /i2c@3160000's alias i2c0 [0002.108] I> Reading eeprom i2c=0 address=0x50 [0002.112] E> I2C: slave not found in slaves. [0002.116] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start true. [0002.124] E> I2C_DEV: Failed to send register address 0x00000000. [0002.130] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 at 0x00000000 via instance 0. [0002.139] E> eeprom: Failed to read I2C slave device [0002.144] I> Eeprom read failed 0x3526070d [0002.149] I> Find /i2c@3180000's alias i2c2 [0002.153] I> Reading eeprom i2c=2 address=0x54 [0002.157] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.162] C> GPIO driver for chip_id 0x2 could not be found [0002.167] E> cam_eeprom_read: Can't get gpio driver [0002.172] I> Eeprom read failed 0x4d4d000d [0002.176] I> Reading eeprom i2c=2 address=0x57 [0002.180] I> Enabling gpio chip_id = 2, gpio pin = 9 [0002.185] C> GPIO driver for chip_id 0x2 could not be found [0002.190] E> cam_eeprom_read: Can't get gpio driver [0002.195] I> Eeprom read failed 0x4d4d000d [0002.199] I> create_pm_ids: id: 3310-1000-D00-F, len: 15 [0002.204] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0002.228] I> regulator 'vdd-hdmi' already enabled [0002.239] I> regulator 'vdd-hdmi' already enabled [0002.243] E> tegrabl_display_init_regulator: hdmi cable is not connected [0002.250] E> tegrabl_display_get_pdata, failed to parse dtb settings [0002.258] E> cannot find any other nvdisp nodes [0002.262] E> no valid display unit config found in dtb [0002.268] W> display init failed [0002.271] initializing target [0002.274] calling apps_init() [0002.277] starting app kernel_boot_app [0002.300] I> found decompressor handler: lz4-legacy [0002.304] I> decompressing BMP blob ... [0002.314] I> Kernel type = Normal [0002.317] I> Loading kernel-bootctrl from partition [0002.322] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1) [0002.336] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid [0002.343] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data [0002.350] I> ########## Fixed storage boot ########## [0002.355] W> No valid slot number is found in scratch register [0002.361] W> Return default slot: _a [0002.364] I> A/B: bin_type (24) slot 0 [0002.380] I> Boot image size read from image header: 74aba [0002.385] I> Boot image load address: 0x80400000 [0002.389] I> Loading kernel from partition [0002.393] I> Loading partition kernel at 0x80400000 from device(0x1) [0003.337] I> Validate kernel ... [0003.340] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000 [0003.348] I> kernel-dtb is already loaded [0003.352] I> Validate kernel-dtb ... [0003.355] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000 [0003.363] I> Checking boot.img header magic ... [0003.367] I> [OK] [0003.369] I> Kernel hdr @0x80400000 [0003.372] I> Kernel dtb @0x80000000 [0003.375] I> decompressor handler not found [0003.379] I> Copying kernel image (477882 bytes) from 0x80400800 to 0x80600000 ... [0003.387] I> Done [0003.388] I> Move ramdisk (len: 0) from 0x80475800 to 0x947b0000 [0003.395] I> Updated bpmp info to DTB [0003.400] I> Ramdisk: Base: 0x947b0000; Size: 0x0 [0003.405] I> Updated initrd info to DTB [0003.408] W> WARN: Fail to override "console=none" in commandline [0003.414] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.421] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.429] E> tegrabl_linuxboot_add_disp_param, du 0 failed to get display params [0003.436] I> disabled_core_mask: 0xffffff0c [0003.440] W> No valid slot number is found in scratch register [0003.446] W> Return default slot: _a [0003.449] I> Active slot suffix: [0003.452] I> add_boot_slot_suffix: slot_suffix = [0003.457] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 [0003.501] I> Updated bootarg info to DTB [0003.505] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:df:cb:df [0003.511] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:df:cb:e0 [0003.517] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:df:cb:e1 [0003.523] E> Found no plugin manager ids in source DT [0003.528] W> Add plugin manager ids from board info [0003.533] W> "plugin-manager" doesn't exist, creating [0003.538] W> "ids" doesn't exist, creating [0003.542] W> "connection" doesn't exist, creating [0003.546] W> "configs" doesn't exist, creating [0003.551] I> create_pm_ids: id: 3310-1000-D00-F, len: 15 [0003.556] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93 [0003.567] I> Adding plugin-manager/ids/3310-1000-D00=/i2c@c250000:module@0x50 [0003.574] W> "i2c@c250000" doesn't exist, creating [0003.578] W> "module@0x50" doesn't exist, creating [0003.584] I> Adding plugin-manager/ids/3310-1000-D00-F [0003.590] I> Adding plugin-manager/configs/3310-mem-type 00 [0003.596] I> Adding plugin-manager/configs/3310-power-config 00 [0003.602] I> Adding plugin-manager/configs/3310-misc-config 00 [0003.608] I> Adding plugin-manager/configs/3310-modem-config 00 [0003.614] I> Adding plugin-manager/configs/3310-touch-config 00 [0003.620] I> Adding plugin-manager/configs/3310-display-config 00 [0003.626] I> Adding plugin-manager/cvm [0003.630] W> "chip-id" doesn't exist, creating [0003.634] I> Adding plugin-manager/chip-id/A02P [0003.638] W> "odm-data" doesn't exist, creating [0003.643] I> Adding /chosen/plugin-manager/odm-data [0003.651] I> added [base:0x80000000, size:0x70000000] to /memory [0003.657] I> added [base:0xf0200000, size:0x185600000] to /memory [0003.663] I> added [base:0x275e00000, size:0x200000] to /memory [0003.669] I> added [base:0x276600000, size:0x200000] to /memory [0003.674] I> added [base:0x277000000, size:0x200000] to /memory [0003.680] I> Updated memory info to DTB [0003.684] E> add_disp_param: failed to get display params for du=0 [0003.691] W> "reset" doesn't exist, creating [0003.695] W> "pmc-reset-reason" doesn't exist, creating [0003.701] W> "pmic-reset-reason" doesn't exist, creating [0003.707] I> Adding ecid(00000001645cf3090000000006fd02c0) to DT [0003.713] I> disabled_core_mask: 0xffffff0c [0003.722] I> Add serial number:1422719051358 as DT property [0003.729] I> Plugin-manager override starting [0003.734] I> node /plugin-manager/fragement@0 matches [0003.742] I> node /plugin-manager/fragement@4 matches [0003.752] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches [0003.767] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches [0003.775] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches [0003.783] I> node /plugin-manager/fragment-devslp@0 matches [0003.794] I> node /plugin-manager/fragment-p3310-c00-comm matches [0003.804] I> node /plugin-manager/fragment-p3310-c00-pmic matches [0003.812] I> node /plugin-manager/fragment-p3310-c01 matches [0003.820] I> node /plugin-manager/fragment-p3310-c03 matches [0003.835] I> Disable plugin-manager status in FDT [0003.840] I> Plugin-manager override finished successfully [0003.845] I> tegrabl_load_kernel_and_dtb: Done [0003.849] E> tegrabl_display_clear: display is not initialized [0003.855] W> Boot logo display failed... [0003.858] I> Kernel EP: 0x80600000, DTB: 0x80000000 U-Boot 2016.07-ge6da093be3 (Jun 25 2020 - 21:14:32 -0700) TEGRA186 Model: NVIDIA P2771-0000-500 DRAM: 7.8 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@2490000 Hit any key to stop autoboot: 2 1 0 MMC: no card present switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 890 bytes read in 303 ms (2 KiB/s) 1:primary kernel Retrieving file: /boot/initrd 5565615 bytes read in 467 ms (11.4 MiB/s) Retrieving file: /boot/Image 34330632 bytes read in 1149 ms (28.5 MiB/s) append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 Retrieving file: /boot/tegra186-tx2-cti-ASG016-IMX274.dtb 253172 bytes read in 472 ms (523.4 KiB/s) ## Flattened Device Tree blob at 88400000 Booting using the fdt blob at 0x88400000 reserving fdt memory region: addr=80000000 size=10000 Using Device Tree in place at 0000000088400000, end 0000000088440cf3 ERROR: Can't create DT node reset at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/arch/arm/mach-tegra/dt-edit.c:124/fdt_add_path() ERROR: Can't find/create dest DT node /chosen/reset to copy at /dvs/git/dirty/git-master_linux/3rdparty/u-boot/arch/arm/mach-tegra/dt-edit.c:208/fdt_iter_copy_node() Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (root@tx1-dev2) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Aug 5 17:13:19 EDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f7036000 s61656 r8192 d32552 u102400 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29236(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7969724K/8220672K available (15294K kernel code, 2934K rwdata, 6688K rodata, 8576K init, 609K bss, 185412K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009404] Console: colour dummy device 80x25 [ 0.014067] console [tty0] enabled [ 0.017622] bootconsole [uart8250] disabled [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 4.9.140-tegra (root@tx1-dev2) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Aug 5 17:13:19 EDT 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416, [ 0.000000] OF: fdt: - 80000000 , 70000000 [ 0.000000] OF: fdt: - f0200000 , 185600000 [ 0.000000] OF: fdt: - 275e00000 , 200000 [ 0.000000] OF: fdt: - 276600000 , 200000 [ 0.000000] OF: fdt: - 277000000 , 200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1f7036000 s61656 r8192 d32552 u102400 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968 [ 0.000000] Kernel command line: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/etc/firmware root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 OS=l4t fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29236(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7969724K/8220672K available (15294K kernel code, 2934K rwdata, 6688K rodata, 8576K init, 609K bss, 185412K reserved, 65536K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009600000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009600000 - 0xffffff8009e60000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e60000 - 0xffffff800a13d808 ( 2935 KB) [ 0.000000] .bss : 0xffffff800a13d808 - 0xffffff800a1d5f7c ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.009404] Console: colour dummy device 80x25 [ 0.014067] console [tty0] enabled [ 0.017622] bootconsole [uart8250] disabled [ 0.021996] kmemleak: Kernel memory leak detector disabled [ 0.022012] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022026] pid_max: default: 32768 minimum: 301 [ 0.022342] Security Framework initialized [ 0.022506] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.022517] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.023136] ftrace: allocating 47104 entries in 185 pages [ 0.147867] sched-energy: Sched-energy-costs installed from DT [ 0.147888] ASID allocator initialised with 65536 entries [ 0.181561] tegra-id: chipid=21817. [ 0.181576] tegra-id: opt_subrevision=1. [ 0.181598] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0 [ 0.181611] DTS File Name: tegra186-tx2-cti-ASG016-IMX274.dts [ 0.181622] DTB Build time: Aug 5 2020 17:21:12 [ 0.229932] CPU1: Booted secondary processor [4e0f0030] [ 0.261590] CPU2: Booted secondary processor [4e0f0030] [ 0.293359] CPU3: Booted secondary processor [411fd073] [ 0.325347] CPU4: Booted secondary processor [411fd073] [ 0.357338] CPU5: Booted secondary processor [411fd073] [ 0.357391] Brought up 6 CPUs [ 0.357426] SMP: Total of 6 processors activated. [ 0.357439] CPU features: detected feature: 32-bit EL0 Support [ 0.358191] CPU: All CPU(s) started at EL2 [ 0.358242] alternatives: patching kernel code [ 0.367687] devtmpfs: initialized [ 0.392741] Initilizing CustomIPI irq domain [ 0.392962] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.392990] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.393862] pinctrl core: initialized pinctrl subsystem [ 0.394060] OS set in device tree is not L4T. [ 0.394208] regulator-dummy: no parameters [ 0.394344] Initializing plugin-manager [ 0.394406] Plugin module not found [ 0.394789] node /plugin-manager/fragement@0 match with odm-data enable-denver-wdt [ 0.395435] node /plugin-manager/fragement@4 match with odm-data enable-denver-wdt [ 0.396519] node /plugin-manager/fragment-sdwake-p3310-1000-300 match with board >=3310-1000-300 [ 0.396848] node /plugin-manager/fragement-pmon-p3310-1000-300 match with board >=3310-1000-300 [ 0.397125] node /plugin-manager/fragement-pmon-p3310-1000-800 match with board >=3310-1000-800 [ 0.397340] node /plugin-manager/fragment-devslp@0 match with board >=3310-1000-200 [ 0.397896] node /plugin-manager/fragment-p3310-c00-comm match with board >=3310-1000-800 [ 0.398130] node /plugin-manager/fragment-p3310-c00-pmic match with board >=3310-1000-800 [ 0.398333] node /plugin-manager/fragment-p3310-c01 match with board >=3310-1000-900 [ 0.398570] node /plugin-manager/fragment-p3310-c03 match with board >=3310-1000-B00 [ 0.400405] NET: Registered protocol family 16 [ 0.401214] pstore: using zlib compression [ 0.401639] console [pstore-1] enabled [ 0.401650] pstore: Registered ramoops as persistent store backend [ 0.401664] ramoops: attached 0x200000@0x275880000, ecc: 0/0 [ 0.420952] cpuidle: using governor menu [ 0.421915] bpmp: waiting for handshake [ 0.421930] bpmp: handshake completed [ 0.421954] bpmp: synchronizing channels [ 0.421970] bpmp: channels synchronized [ 0.421982] bpmp: mail init ok [ 0.423492] arm-smmu 12000000.iommu: probing hardware configuration... [ 0.423510] arm-smmu 12000000.iommu: SMMUv2 with: [ 0.423524] arm-smmu 12000000.iommu: stage 1 translation [ 0.423537] arm-smmu 12000000.iommu: stage 2 translation [ 0.423549] arm-smmu 12000000.iommu: nested translation [ 0.423565] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.423584] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.423603] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.423618] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.423632] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.425463] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e64000) [ 0.425492] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.428194] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.429305] Registering BPMP clocks... [ 0.429400] tegra_bpmp_clk_init: clock init ok (638 clks) [ 0.429897] Serial: AMBA PL011 UART driver [ 0.431050] tegra_powergate_init: DONE [ 0.431071] DTS File Name: tegra186-tx2-cti-ASG016-IMX274.dts [ 0.431087] DTB Build time: Aug 5 2020 17:21:12 [ 0.432421] Tegra reboot handler registered. [ 0.433668] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.433745] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.433768] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.433781] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.433793] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.433957] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.433984] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.434283] iommu: Adding device 3460000.sdhci to group 0 [ 0.434924] iommu: Adding device 3400000.sdhci to group 1 [ 0.435961] iommu: Adding device 3507000.ahci-sata to group 2 [ 0.435989] arm-smmu: forcing sodev map for 3507000.ahci-sata [ 0.436410] iommu: Adding device 3160000.i2c to group 3 [ 0.436825] iommu: Adding device c240000.i2c to group 4 [ 0.437152] iommu: Adding device 3180000.i2c to group 5 [ 0.437510] iommu: Adding device 3190000.i2c to group 6 [ 0.437931] iommu: Adding device 31b0000.i2c to group 7 [ 0.438248] iommu: Adding device 31c0000.i2c to group 8 [ 0.438566] iommu: Adding device c250000.i2c to group 9 [ 0.438883] iommu: Adding device 31e0000.i2c to group 10 [ 0.440353] iommu: Adding device 3210000.spi to group 11 [ 0.440673] iommu: Adding device c260000.spi to group 12 [ 0.441335] iommu: Adding device 3100000.serial to group 13 [ 0.441690] iommu: Adding device 3110000.serial to group 14 [ 0.442011] iommu: Adding device c280000.serial to group 15 [ 0.442320] iommu: Adding device 3130000.serial to group 16 [ 0.443538] iommu: Adding device 2490000.ether_qos to group 17 [ 0.443565] arm-smmu: forcing sodev map for 2490000.ether_qos [ 0.444203] iommu: Adding device b000000.rtcpu to group 18 [ 0.446046] iommu: Adding device 13e10000.host1x to group 19 [ 0.446341] iommu: Adding device 13e10000.host1x:ctx0 to group 20 [ 0.446633] iommu: Adding device 13e10000.host1x:ctx1 to group 21 [ 0.446925] iommu: Adding device 13e10000.host1x:ctx2 to group 22 [ 0.447226] iommu: Adding device 13e10000.host1x:ctx3 to group 23 [ 0.447514] iommu: Adding device 13e10000.host1x:ctx4 to group 24 [ 0.447805] iommu: Adding device 13e10000.host1x:ctx5 to group 25 [ 0.448102] iommu: Adding device 13e10000.host1x:ctx6 to group 26 [ 0.448393] iommu: Adding device 13e10000.host1x:ctx7 to group 27 [ 0.448830] iommu: Adding device 150c0000.nvcsi to group 28 [ 0.449431] iommu: Adding device 15700000.vi to group 29 [ 0.449776] iommu: Adding device 15600000.isp to group 30 [ 0.450203] iommu: Adding device 15210000.nvdisplay to group 31 [ 0.450724] iommu: Adding device 15340000.vic to group 32 [ 0.450938] iommu: Adding device 154c0000.nvenc to group 33 [ 0.451151] iommu: Adding device 15480000.nvdec to group 34 [ 0.451468] iommu: Adding device 15380000.nvjpg to group 35 [ 0.451679] iommu: Adding device 15500000.tsec to group 36 [ 0.451896] iommu: Adding device 15100000.tsecb to group 37 [ 0.452511] iommu: Adding device 15810000.se to group 38 [ 0.452718] iommu: Adding device 15820000.se to group 39 [ 0.452928] iommu: Adding device 15830000.se to group 40 [ 0.453132] iommu: Adding device 15840000.se to group 41 [ 0.453931] iommu: Adding device smmu_test to group 42 [ 0.454498] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c10000 [ 0.454523] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c20000 [ 0.454544] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c30000 [ 0.454564] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c40000 [ 0.454584] mc: mapped MMIO address: 0xffffff800b110000 -> 0x2c50000 [ 0.454602] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.454622] mc-err: mcerr ops are set to t18x [ 0.454767] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c [ 0.455757] iommu: Adding device 3530000.xhci to group 43 [ 0.455782] arm-smmu: forcing sodev map for 3530000.xhci [ 0.456192] iommu: Adding device 3550000.xudc to group 44 [ 0.456215] arm-smmu: forcing sodev map for 3550000.xudc [ 0.456889] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.456908] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.457465] iommu: Adding device 17000000.gp10b to group 45 [ 0.458434] tegra-reset 5000000.clock: registered 193 resets. [ 0.460367] iommu: Adding device d000000.bpmp to group 46 [ 0.460572] bpmp: ping status is 0 [ 0.460677] bpmp d000000.bpmp: firmware tag is 4208eb5c85fe47a2235fbc0b8eb87dca [ 0.462644] bpmp d000000.bpmp: probe ok [ 0.465319] iommu: Adding device 2600000.dma to group 47 [ 0.466504] GPIO line 334 (e3325_sdio_rst) hogged as output/high [ 0.466549] GPIO line 332 (e3325_lane0_mux) hogged as output/low [ 0.466590] GPIO line 424 (wifi-enable) hogged as output/high [ 0.466631] GPIO line 445 (sdmmc-wake-support-input) hogged as input [ 0.466671] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low [ 0.466717] GPIO line 461 (camera-control-output-low) hogged as output/low [ 0.466757] GPIO line 456 (camera-control-output-low) hogged as output/low [ 0.466980] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio) [ 0.470700] GPIO line 315 (wifi-wake-ap) hogged as input [ 0.470875] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon) [ 0.472404] iommu: Adding device 10003000.pcie-controller to group 48 [ 0.472434] arm-smmu: forcing sodev map for 10003000.pcie-controller [ 0.472739] iommu: Adding device sound to group 49 [ 0.473074] iommu: Adding device 3510000.hda to group 50 [ 0.480331] iommu: Adding device c1a0000.aon to group 51 [ 0.480787] vdd-ac-bat: 5000 mV [ 0.482507] vdd-1v8-ap: 1800 mV [ 0.517608] random: fast init done [ 0.522572] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.528418] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.529018] SCSI subsystem initialized [ 0.529558] usbcore: registered new interface driver usbfs [ 0.529664] usbcore: registered new interface driver hub [ 0.529852] usbcore: registered new device driver usb [ 0.546007] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8 [ 0.554129] vddio-ddr: at 1125 mV [ 0.557964] avdd_dsi_csi: 1200 mV [ 0.561653] vdd-1v8: 1800 mV [ 0.565627] vdd-3v3-sys: 3300 mV [ 0.567015] spmic-ldo0: at 1800 mV [ 0.568017] spmic-ldo1: at 800 mV [ 0.573634] vddio-3v3: 3300 mV [ 0.574712] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV [ 0.577637] vdd-rtc: at 800 mV [ 0.578598] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV [ 0.581626] spmic-ldo6: at 1500 mV [ 0.585629] vdd-pex-1v00: 1000 mV [ 0.586500] dvdd-pex: 1000 mV [ 0.589335] GPIO line 253 (spmic_gpio_input) hogged as input [ 0.589549] GPIO line 254 (spmic_gpio_input) hogged as input [ 0.589899] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio) [ 0.590319] max77620 4-003c: max77620 probe successful [ 0.590947] media: Linux media interface: v0.10 [ 0.591033] Linux video capture interface: v2.00 [ 0.595351] pps_core: LinuxPPS API ver. 1 registered [ 0.595403] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.595491] PTP clock support registered [ 0.595797] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.596133] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.596220] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.598507] trusty trusty: trusty version: Built: 21:16:26 Jun 25 2020 [ 0.598600] trusty trusty: selected api version: 3 (requested 3) [ 0.599712] Advanced Linux Sound Architecture Driver Initialized. [ 0.600275] Bluetooth: Core ver 2.22 [ 0.600357] NET: Registered protocol family 31 [ 0.600412] Bluetooth: HCI device and connection manager initialized [ 0.600474] Bluetooth: HCI socket layer initialized [ 0.600510] Bluetooth: L2CAP socket layer initialized [ 0.600579] Bluetooth: SCO socket layer initialized [ 0.601579] en-vdd-sd: 3300 mV [ 0.601985] en-vdd-cam: 1800 mV [ 0.602278] vdd-hdmi: 5000 mV [ 0.602658] vdd-usb0-5v: 5000 mV [ 0.603047] vdd-usb1-5v: 5000 mV [ 0.603313] en-vdd-ts-1v8: 1800 mV [ 0.603596] en-vdd-ts-hv-3v3: 3300 mV [ 0.603890] en-vdd-disp-3v3: 3300 mV [ 0.604198] en-mdm-pwr-3v7: 3700 mV [ 0.604474] en-vdd-disp-1v8: 1800 mV [ 0.604786] en-vdd-cam-hv-2v8: 2800 mV [ 0.605110] en-vdd-cam-1v2: 1200 mV [ 0.605394] vdd-fan: 5000 mV [ 0.605738] vdd-3v3: 3300 mV [ 0.606120] dis-vdd-1v2: 1200 mV [ 0.606434] en-vdd-vcm-2v8: 2800 mV [ 0.606793] vdd-usb2-5v: 5000 mV [ 0.607112] vdd-sys-bl: 3300 mV [ 0.607449] en-vdd-sys: 1200 mV [ 0.610359] camchar: rtcpu character device driver loaded [ 0.610980] gpio tegra-gpio wake53 for gpio=159(X:7) [ 0.613128] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.615051] clocksource: Switched to clocksource arch_sys_counter [ 0.654653] VFS: Disk quotas dquot_6.6.0 [ 0.654945] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.656099] tegra-pcie 10003000.pcie-controller: wrong configuration updated in DT, switching to default 2x1, 1x1, 1x1 configuration [ 0.657211] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.657918] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc [ 0.657962] nvmap_page_pool_init: Total RAM pages: 2008815 [ 0.657997] nvmap_page_pool_init: nvmap page pool size: 251101 pages (980 MB) [ 0.658090] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails [ 0.658202] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.663024] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels [ 0.674874] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm [ 0.675155] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm [ 0.675573] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.675713] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.675891] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra [ 0.676061] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra [ 0.676306] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die [ 0.676583] la/ptsa driver initialized. [ 0.676618] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz [ 0.676651] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB [ 0.677798] NET: Registered protocol family 2 [ 0.679571] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected [ 0.679909] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.680617] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.681390] TCP: Hash tables configured (established 65536 bind 65536) [ 0.681483] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.681700] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.682553] NET: Registered protocol family 1 [ 0.683716] RPC: Registered named UNIX socket transport module. [ 0.683756] RPC: Registered udp transport module. [ 0.683786] RPC: Registered tcp transport module. [ 0.683815] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.684283] Trying to unpack rootfs image as initramfs... [ 0.886011] Freeing initrd memory: 5432K [ 0.905830] host1x 13e10000.host1x: initialized [ 0.907951] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.912554] audit: initializing netlink subsys (disabled) [ 0.912624] audit: type=2000 audit(0.796:1): initialized [ 0.913331] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.925054] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.927759] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.929346] 9p: Installing v9fs 9p2000 file system support [ 0.935280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.935512] io scheduler noop registered [ 0.936142] io scheduler cfq registered (default) [ 0.941004] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.059976] iommu: Adding device aconnect@2a41000:adsp_audio to group 52 [ 1.099190] iommu: Adding device 2993000.adsp to group 53 [ 1.100362] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.103367] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled [ 1.107192] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.108407] tegra-pwm 3290000.pwm: PWM clk can sleep in ops [ 1.109506] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 1.110586] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.114014] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.114284] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 1.114329] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=1500000, max_bw=4687500 [ 1.117546] tsec 15500000.tsec: initialized [ 1.118806] tsec 15100000.tsecb: initialized [ 1.121927] nvdec 15480000.nvdec: initialized [ 1.127626] falcon 15340000.vic: initialized [ 1.129243] falcon 154c0000.nvenc: initialized [ 1.130705] falcon 15380000.nvjpg: initialized [ 1.134284] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.136105] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.137789] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.139431] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.141007] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.142566] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.144134] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.145654] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.149052] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.149095] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.149172] tegradccommon 15200000.dc_common: dma mapping done [ 1.150192] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=389 [ 1.150262] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1 [ 1.150320] generic_infoframe_type: 0x87 [ 1.150396] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.150429] tegradc 15210000.nvdisplay: Display dc.ffffff800b650000 registered with id=0 [ 1.150938] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.151789] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.151937] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.152071] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.152098] tegra_cec 3960000.tegra_cec: probed [ 1.152860] of_fixed_clk: probe of can_clock failed with error -17 [ 1.156175] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s [ 1.156240] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz [ 1.156272] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz [ 1.156804] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1 [ 1.156837] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1 [ 1.164215] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.164263] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.168243] tegradc 15210000.nvdisplay: probed [ 1.169633] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.170019] Console: switching to colour frame buffer device 80x30 [ 1.170088] tegradc 15210000.nvdisplay: fb registered [ 1.170299] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.170315] gpio tegra-gpio wake21 for gpio=121(P:1) [ 1.170354] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.171031] kfuse 3830000.kfuse: initialized [ 1.172522] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.177159] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.180438] console [ttyS0] disabled [ 1.180523] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 35, base_baud = 25500000) is a Tegra [ 2.165163] tegra_cec 3960000.tegra_cec: Can't find physical addresse. [ 2.165170] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 3.565422] console [ttyS0] enabled [ 3.570807] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 36, base_baud = 0) is a TEGRA_UART [ 3.580737] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 37, base_baud = 0) is a TEGRA_UART [ 3.589723] serial-tegra 3130000.serial: RX in PIO mode [ 3.595882] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 38, base_baud = 0) is a TEGRA_UART [ 3.605714] [drm] Initialized [ 3.618904] brd: module loaded [ 3.626907] loop: module loaded [ 3.630260] tegra_profiler: version: 1.141, samples/io: 48/28 [ 3.636225] tegra_profiler: auth: init [ 3.640601] nct1008_nct72 7-004c: starting parse dt [ 3.640825] THERMAL EST: found 3 subdevs [ 3.640829] THERMAL EST num_resources: 0 [ 3.640834] [THERMAL EST subdev 0] [ 3.640839] [THERMAL EST subdev 1] [ 3.640843] [THERMAL EST subdev 2] [ 3.641167] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est [ 3.641171] THERMAL EST: thz register success. [ 3.645351] THERMAL EST: end of probe, return err: 0 [ 3.646352] sd: No Scsi addr parsed to reserve index [ 3.646386] hisi_sas: driver version v1.6 [ 3.654509] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 3.654520] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst [ 3.655456] scsi host0: tegra_ahci [ 3.660373] scsi host1: tegra_ahci [ 3.660582] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24 [ 3.660587] ata2: DUMMY [ 3.664930] libphy: Fixed MDIO Bus: probed [ 3.665509] tun: Universal TUN/TAP device driver, 1.6 [ 3.665513] tun: (C) 1999-2004 Max Krasnyansky [ 3.667624] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.667626] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.667655] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 3.667656] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.667685] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.667686] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.667713] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 3.667714] Copyright(c) 1999 - 2017 Intel Corporation. [ 3.675193] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2) [ 3.678673] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b df cb e1 [ 3.678769] libphy: dwc_phy: probed [ 3.679201] bcm54xx_low_power_mode(): put phy in iddq-lp mode [ 3.681243] PPP generic driver version 2.4.2 [ 3.682540] PPP BSD Compression module registered [ 3.682545] PPP Deflate Compression module registered [ 3.682562] PPP MPPE Compression module registered [ 3.682566] NET: Registered protocol family 24 [ 3.682615] usbcore: registered new interface driver r8152 [ 3.682651] usbcore: registered new interface driver asix [ 3.682688] usbcore: registered new interface driver ax88179_178a [ 3.682722] usbcore: registered new interface driver cdc_ether [ 3.682758] usbcore: registered new interface driver net1080 [ 3.682791] usbcore: registered new interface driver cdc_subset [ 3.682823] usbcore: registered new interface driver zaurus [ 3.682862] usbcore: registered new interface driver cdc_ncm [ 3.683025] VFIO - User Level meta-driver version: 0.3 [ 3.688612] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.688628] ehci-pci: EHCI PCI platform driver [ 3.688666] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.688674] ohci-pci: OHCI PCI platform driver [ 3.688707] ohci-platform: OHCI generic platform driver [ 3.693736] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP [ 3.696173] tegra-xusb 3530000.xhci: extcon 0: ffffffc1eb54f400 id [ 3.696968] usbcore: registered new interface driver uas [ 3.697013] usbcore: registered new interface driver usb-storage [ 3.697095] usbcore: registered new interface driver usbserial [ 3.698657] tegra-xusb 3530000.xhci: Firmware timestamp: 2019-10-31 05:52:15 UTC, Version: 55.17 release [ 3.701133] tegra-xudc-new 3550000.xudc: device count: 1 [ 3.702269] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 3.702295] tegra-xudc-new 3550000.xudc: entering ELPG [ 3.703033] tegra-xudc-new 3550000.xudc: entering ELPG done [ 3.703491] mousedev: PS/2 mouse device common for all mice [ 3.703549] usbcore: registered new interface driver xpad [ 3.723136] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.723161] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1 [ 3.723914] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810 [ 3.723954] tegra-xusb 3530000.xhci: irq 69, io mem 0x03530000 [ 3.724240] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.724246] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.724251] usb usb1: Product: xHCI Host Controller [ 3.724256] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 3.724259] usb usb1: SerialNumber: 3530000.xhci [ 3.724666] hub 1-0:1.0: USB hub found [ 3.724712] hub 1-0:1.0: 4 ports detected [ 3.725119] tegra-xusb 3530000.xhci: xHCI Host Controller [ 3.725667] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2 [ 3.725942] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.725947] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.725952] usb usb2: Product: xHCI Host Controller [ 3.725957] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 3.725961] usb usb2: SerialNumber: 3530000.xhci [ 3.726308] hub 2-0:1.0: USB hub found [ 3.726344] hub 2-0:1.0: 3 ports detected [ 3.827801] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 3.829193] Wake73 for irq=42 [ 3.830487] rtc rtc1: alarm rtc device [ 3.830502] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 3.830527] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.830744] i2c /dev entries driver [ 3.833406] pca9570 2-0024: pca9570_icr_move, forward val=5 [ 3.943783] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 3.943822] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 3.943917] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 3.943949] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 3.972351] ata1: SATA link down (SStatus 0 SControl 300) [ 4.051099] usb 1-2: new low-speed USB device number 2 using tegra-xusb [ 4.051154] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.051186] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.051260] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.051288] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 4.076761] usb 1-2: New USB device found, idVendor=413c, idProduct=301a [ 4.076768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.076773] usb 1-2: Product: Dell MS116 USB Optical Mouse [ 4.076777] usb 1-2: Manufacturer: PixArt [ 4.161426] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.161462] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.161557] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.161589] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 4.195090] usb 1-3: new low-speed USB device number 3 using tegra-xusb [ 4.223319] usb 1-3: New USB device found, idVendor=413c, idProduct=2113 [ 4.223326] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.223330] usb 1-3: Product: Dell KB216 Wired Keyboard [ 4.271156] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.271192] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.271305] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.271337] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 4.305206] nct1008_nct72 7-004c: !!!Found deprecated property!!! [ 4.311323] nct1008_nct72 7-004c: success parsing dt [ 4.316446] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail [ 4.355395] nct1008_nct72 7-004c: LOC shutdown limit 107 [ 4.361292] nct1008_nct72 7-004c: EXT shutdown limit 107 [ 4.381469] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.387803] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.394699] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.399486] nct1008_nct72 7-004c: initial LOC temp: 38000 [ 4.399859] nct1008_nct72 7-004c: initial EXT temp: 52500 [ 4.400565] nct1008_nct72 7-004c: hi_b:-11, lo_b:0 [ 4.400964] gpio tegra-gpio-aon wake35 for gpio=16(V:0) [ 4.401185] nct1008_nct72 7-004c: nct1008_probe: initialized [ 4.427781] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 4.544636] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.550967] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.557895] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.564221] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 4.681086] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.687412] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.694306] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.700625] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 4.817466] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.823792] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.830684] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.837004] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 4.953836] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.960216] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 4.967127] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 4.973466] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 2 [ 5.090317] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.096648] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 48 [ 5.103541] tegra-i2c 3180000.i2c: no acknowledge from address 0x24 [ 5.109860] pca9570 2-0024: pca9570_write_reg:i2c write failed, 0x24 = 0 [ 5.116581] pca9570 2-0024: pca9570_icr_move:i2c write failed [ 5.122473] pca9570: probe of 2-0024 failed with error -121 [ 5.128871] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 5.140894] parse_throttle_dt_data: Num cap clks = 4 [ 5.145920] parse_throttle_dt_data: clk=mcpu type=1 [ 5.150823] parse_throttle_dt_data: clk=bcpu type=2 [ 5.155728] parse_throttle_dt_data: clk=gpu type=4 [ 5.160547] parse_throttle_dt_data: clk=emc type=3 [ 5.166294] tegra_throttle_probe: probe successful. #cdevs=4 [ 5.172537] FAN dev name: pwm-fan [ 5.175949] FAN:gpio request success. [ 5.179642] FAN: can't find tach_gpio [ 5.183385] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 5.189467] pwm_fan_driver pwm-fan: got pwm for fan. polarity is inversed [ 5.196288] pwm_fan_driver pwm-fan: tach period: 1000 [ 5.202127] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 5.209734] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 5.217505] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 5.225355] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 5.233207] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 5.241058] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 5.248910] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 5.256763] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 5.264610] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 5.272542] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 5.282212] device-mapper: uevent: version 1.0.3 [ 5.287752] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 5.296562] CPU EMC frequency mapping table: default setting [ 5.309189] cpufreq: platform driver Initialization: pass [ 5.315247] cpuidle: Initializing cpuidle driver init for Denver cluster [ 5.322097] cpuidle: Initializing cpuidle driver init for A57 cluster [ 5.329347] sdhci: Secure Digital Host Controller Interface driver [ 5.335548] sdhci: Copyright(c) Pierre Ossman [ 5.339925] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.347192] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful [ 5.356349] CMDQ: cmdq_platfm_init successful [ 5.361949] CQE: CMD_TIMING bit set for R1B DCMD [ 5.362228] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful [ 5.366896] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 5.366946] sdhci-tegra 3400000.sdhci: Got WP GPIO [ 5.367684] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 5.369562] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 256 [ 5.374687] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 5.375711] tegra-se-nvhost 15810000.se: initialized [ 5.376819] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 5.377670] tegra-se-nvhost 15820000.se: initialized [ 5.378695] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 5.379413] tegra-se-nvhost 15830000.se: initialized [ 5.383578] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 5.384251] tegra-se-nvhost 15840000.se: initialized [ 5.385442] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 5.385690] hidraw: raw HID events driver (C) Jiri Kosina [ 5.389000] input: PixArt Dell MS116 USB Optical Mouse as /devices/3530000.xhci/usb1/1-2/1-2:1.0/0003:413C:301A.0001/input/input0 [ 5.389170] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-3530000.xhci-2/input0 [ 5.393067] input: Dell KB216 Wired Keyboard as /devices/3530000.xhci/usb1/1-3/1-3:1.0/0003:413C:2113.0002/input/input1 [ 5.419186] gpio tegra-gpio wake71 for gpio=125(P:5) [ 5.419245] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 5.451305] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-3530000.xhci-3/input0 [ 5.458384] input: Dell KB216 Wired Keyboard as /devices/3530000.xhci/usb1/1-3/1-3:1.1/0003:413C:2113.0003/input/input2 [ 5.515347] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-3530000.xhci-3/input1 [ 5.515428] usbcore: registered new interface driver usbhid [ 5.515430] usbhid: USB HID core driver [ 5.517786] tegra-i2c 3160000.i2c: no acknowledge from address 0x42 [ 5.517825] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87 [ 5.517994] ina3221x: probe of 0-0042 failed with error -121 [ 5.518286] tegra-i2c 3160000.i2c: no acknowledge from address 0x43 [ 5.518323] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87 [ 5.518443] ina3221x: probe of 0-0043 failed with error -121 [ 5.520836] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 5.523783] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192 [ 5.524203] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 5.524464] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200 [ 5.524969] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300 [ 5.526744] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480 [ 5.526883] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80 [ 5.526998] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680 [ 5.527139] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80 [ 5.527385] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80 [ 5.527874] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (50) [ 5.527877] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful [ 5.528884] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96 [ 5.530437] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 5.531226] tegra186-aondbg aondbg: aondbg driver probe() OK [ 5.531559] register_ari_mca_banks: Registered MCA ROC:IOB [ 5.531632] register_ari_mca_banks: Registered MCA ROC:CCE [ 5.531947] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.531950] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000 [ 5.531953] tegra18-bridge 2390000.axi2apb: bridge probed OK [ 5.532010] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532013] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000 [ 5.532016] tegra18-bridge 23a0000.axi2apb: bridge probed OK [ 5.532070] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532073] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000 [ 5.532080] tegra18-bridge 23b0000.axi2apb: bridge probed OK [ 5.532136] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532139] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000 [ 5.532161] tegra18-bridge 23c0000.axi2apb: bridge probed OK [ 5.532212] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532215] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000 [ 5.532217] tegra18-bridge 23d0000.axi2apb: bridge probed OK [ 5.532272] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532277] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000 [ 5.532279] tegra18-bridge 2100000.axip2p: bridge probed OK [ 5.532330] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532336] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000 [ 5.532338] tegra18-bridge 2110000.axip2p: bridge probed OK [ 5.532388] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532394] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000 [ 5.532397] tegra18-bridge 2120000.axip2p: bridge probed OK [ 5.532447] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532453] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000 [ 5.532455] tegra18-bridge 2130000.axip2p: bridge probed OK [ 5.532505] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532508] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000 [ 5.532510] tegra18-bridge 2140000.axip2p: bridge probed OK [ 5.532572] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532579] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000 [ 5.532581] tegra18-bridge 2150000.axip2p: bridge probed OK [ 5.532632] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532638] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000 [ 5.532641] tegra18-bridge 2160000.axip2p: bridge probed OK [ 5.532692] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532698] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000 [ 5.532700] tegra18-bridge 2170000.axip2p: bridge probed OK [ 5.532753] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532759] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000 [ 5.532762] tegra18-bridge 2180000.axip2p: bridge probed OK [ 5.532823] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds [ 5.532828] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000 [ 5.532831] tegra18-bridge 2190000.axip2p: bridge probed OK [ 5.532928] tegra18_a57_serr_init: on CPU 2 a Denver Core [ 5.532986] tegra18x_actmon d230000.actmon: in actmon_register()... [ 5.533593] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all [ 5.538973] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available [ 5.539165] denver_knobs_init:MTS_VERSION:47926945 [ 5.547420] nvpmodel: initialized successfully [ 5.548927] trusty-virtio trusty:virtio: initializing [ 5.549219] trusty_ipc virtio0: vring0: va(pa) ffffffc1e92cc000(0) qsz 32 notifyid 1 [ 5.549229] trusty_ipc virtio0: vring1: va(pa) ffffffc1e92ce000(0) qsz 32 notifyid 2 [ 5.549356] trusty-virtio trusty:virtio: initializing done [ 5.549458] trusty_ipc virtio0: is online [ 5.551108] usbcore: registered new interface driver snd-usb-audio [ 5.559508] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input3 [ 5.559776] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input4 [ 5.680538] OPE platform probe [ 5.680662] OPE platform probe successful [ 5.773881] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 5.773969] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 5.774047] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 5.774130] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 5.774211] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 5.774290] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 5.774379] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 5.774491] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 5.774573] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 5.774657] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 5.774738] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 5.774818] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 5.774903] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 5.774987] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 5.775095] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 5.775202] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 5.775283] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 5.775365] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 5.775449] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 5.775558] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 5.805907] u32 classifier [ 5.805910] Actions configured [ 5.806001] Initializing XFRM netlink socket [ 5.807872] NET: Registered protocol family 10 [ 5.809120] NET: Registered protocol family 17 [ 5.809131] NET: Registered protocol family 15 [ 5.809339] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.809421] Bluetooth: RFCOMM socket layer initialized [ 5.809434] Bluetooth: RFCOMM ver 1.11 [ 5.809440] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.809446] Bluetooth: HIDP socket layer initialized [ 5.809466] 9pnet: Installing 9P2000 support [ 5.809514] Key type dns_resolver registered [ 5.814149] Registered cp15_barrier emulation handler [ 5.814169] Registered setend emulation handler [ 5.815586] registered taskstats version 1 [ 5.818654] isp 15600000.isp: initialized [ 5.822922] nvcsi 150c0000.nvcsi: initialized [ 5.824186] tegra-vi4 15700000.vi: using default number of vi channels,15 [ 5.828613] gpio tegra-gpio-aon wake29 for gpio=56(FF:0) [ 5.828700] gpio tegra-gpio-aon wake67 for gpio=57(FF:1) [ 5.828793] gpio tegra-gpio-aon wake68 for gpio=58(FF:2) [ 5.828959] input: gpio-keys as /devices/gpio-keys/input/input5 [ 5.830127] tegra-vi4 15700000.vi: initialized [ 5.830930] tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound [ 5.861620] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:17 UTC (946688417) [ 5.905826] bpmp: mounted debugfs mirror [ 5.907245] bwmgr: missing cdev-type property [ 5.913957] spmic-ldo0: disabling [ 5.914187] spmic-ldo1: disabling [ 5.914430] avdd-ts-hv: disabling [ 5.914612] en-vdd-sd: disabling [ 5.914616] vdd-usb0-5v: disabling [ 5.914618] vdd-usb1-5v: disabling [ 5.914623] vdd-3v3: disabling [ 5.914626] en-vdd-vcm-2v8: disabling [ 5.914628] vdd-sys-bl: disabling [ 5.914650] ALSA device list: [ 5.914654] #0: tegra-hda at 0x3518000 irq 382 [ 5.914656] #1: tegra-snd-t186ref-mobile-rt565x [ 6.449986] Freeing unused kernel memory: 8576K [ 6.491106] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr [ 6.499100] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr [ 6.504526] Root device found: mmcblk0p1 [ 6.557008] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1 [ 6.579731] mmc0: periodic cache flush enabled [ 6.584204] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.591107] mmcblk0: mmc0:0001 DG4032 29.1 GiB [ 6.595866] mmcblk0boot0: mmc0:0001 DG4032 partition 1 4.00 MiB [ 6.602080] mmcblk0boot1: mmc0:0001 DG4032 partition 2 4.00 MiB [ 6.612296] mmcblk0rpmb: mmc0:0001 DG4032 partition 3 4.00 MiB [ 6.623250] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 [ 6.708251] Found dev node: /dev/mmcblk0p1 [ 6.749394] mmc1: Applying tuning correction [ 6.753706] mmc1: Tap value after applying correction 65 [ 6.759019] mmc1: hw tuning done ... [ 6.769815] mmc1: new ultra high speed SDR104 SDIO card at address 0001 [ 6.825283] EXT4-fs (mmcblk0p1): 10 orphan inodes deleted [ 6.830724] EXT4-fs (mmcblk0p1): recovery complete [ 6.841371] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.849892] Wake76 for irq=199 [ 6.852949] Wake77 for irq=199 [ 6.856000] Wake78 for irq=199 [ 6.859051] Wake79 for irq=199 [ 6.862111] Wake80 for irq=199 [ 6.865163] Wake81 for irq=199 [ 6.868216] Wake82 for irq=199 [ 6.872007] tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0 [ 6.872341] Rootfs mounted over mmcblk0p1 [ 6.881759] tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0 [ 6.888883] Switching from initrd to actual rootfs [ 6.951313] usb usb2: usb_suspend_both: status 0 [ 7.012854] systemd[1]: System time before build time, advancing clock. [ 7.049523] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.099834] cgroup: cgroup2: unknown option "nsdelegate" [ 7.125434] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.150122] systemd[1]: Detected architecture arm64. [ 7.248150] systemd[1]: Set hostname to . [ 7.415946] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 7.433207] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 7.635368] random: systemd: uninitialized urandom read (16 bytes read) [ 7.649876] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.659731] random: systemd: uninitialized urandom read (16 bytes read) [ 7.669686] systemd[1]: Created slice User and Session Slice. [ 7.675748] random: systemd: uninitialized urandom read (16 bytes read) [ 7.682741] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.690568] systemd[1]: Reached target Swap. [ 7.695110] systemd[1]: Reached target User and Group Name Lookups. [ 7.730078] gpio tegra-gpio-aon wake30 for gpio=60(FF:4) [ 7.765973] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 7.903153] systemd-journald[2287]: Received request to flush runtime journal from PID 1 [ 8.906642] random: crng init done [ 8.910049] random: 7 urandom warning(s) missed due to ratelimiting [ 8.930379] using random self ethernet address [ 8.939078] using random host ethernet address [ 9.752397] using random self ethernet address [ 9.758718] using random host ethernet address [ 10.363566] CPU1: shutdown [ 10.418490] CPU2: shutdown [ 11.095624] vdd-1v8: voltage operation not allowed [ 11.100526] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 11.128981] vdd-1v8: voltage operation not allowed [ 11.133901] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 11.160059] vdd-1v8: voltage operation not allowed [ 11.164909] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 11.173960] vdd-1v8: voltage operation not allowed [ 11.178832] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 11.287293] vdd-1v8: voltage operation not allowed [ 11.292397] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 11.301891] vdd-1v8: voltage operation not allowed [ 11.306905] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) [ 11.315137] vdd-1v8: voltage operation not allowed [ 11.320027] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1) Ubuntu 18.04.4 LTS n-desktop ttyS0 n-desktop login: n Password: Last login: Thu Aug 27 15:23:06 EDT 2020 on ttyS0 Welcome to Ubuntu 18.04.4 LTS (GNU/Linux 4.9.140-tegra aarch64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage This system has been minimized by removing packages and content that are not required on a system that users do not log into. To restore this content, you can run the 'unminimize' command. 205 packages can be updated. 141 updates are security updates. n@n-desktop:~$ n@n-desktop:~$ n@n-desktop:~$ [ 26.385729] edid invalid [ 26.408743] edid invalid [ 27.373519] edid invalid [ 27.492187] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 27.506513] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 27.517697] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 27.528569] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 27.539327] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 27.550236] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 27.560862] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 27.571795] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 27.582579] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 27.626490] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 27.640611] tegradc 15210000.nvdisplay: hdmi: edid read failed [ 27.694200] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 [ 27.825539] tegra-i2c 3190000.i2c: no acknowledge from address 0x50 n@n-desktop:~$ n -bash: n: command not found n@n-desktop:~$ nls Desktop Downloads Music Public Templates Documents examples.desktop Pictures sig Videos n@n-desktop:~$