[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (root@frank-Desktop) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #2 SMP PREEMPT Tue Mar 10 11:31:17 CST 2020 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc0fefb1000 s61592 r8192 d32616 u102400 [ 0.000000] pcpu-alloc: s61592 r8192 d32616 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,2 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29504(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3570592K/4159488K available (15102K kernel code, 2940K rwdata, 6524K rodata, 8576K init, 611K bss, 113760K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f40000 ( 15104 KB) [ 0.000000] .rodata : 0xffffff8008f40000 - 0xffffff80095b0000 ( 6592 KB) [ 0.000000] .init : 0xffffff80095b0000 - 0xffffff8009e10000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e10000 - 0xffffff800a0ef008 ( 2941 KB) [ 0.000000] .bss : 0xffffff800a0ef008 - 0xffffff800a187dbc ( 612 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001774] Console: colour dummy device 80x25 [ 0.001792] console [tty0] enabled [ 0.001809] kmemleak: Kernel memory leak detector disabled [ 0.001831] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001843] pid_max: default: 32768 minimum: 301 [ 0.002302] Security Framework initialized [ 0.002522] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002532] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003654] ftrace: allocating 46877 entries in 184 pages [ 0.175271] sched-energy: CPU device node has no sched-energy-costs [ 0.175306] ASID allocator initialised with 65536 entries [ 0.211686] tegra-id: chipid=22117. [ 0.211699] tegra-id: opt_subrevision=0. [ 0.211717] Tegra Speedo/IDDQ fuse revision 4 [ 0.211722] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.211726] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.211732] Tegra: CPU Speedo Value 2084, SoC Speedo Value 1963, GPU Speedo Value 2079 [ 0.211736] Tegra: CPU IDDQ Value 2032, SoC IDDQ Value 2164, GPU IDDQ Value 2660 [ 0.211754] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.211770] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-b425-0002-p3449-0000-b00.dts [ 0.211778] DTB Build time: Mar 10 2020 11:58:07 [ 0.261043] CPU1: Booted secondary processor [411fd071] [ 0.292972] CPU2: Booted secondary processor [411fd071] [ 0.324936] CPU3: Booted secondary processor [411fd071] [ 0.325023] Brought up 4 CPUs [ 0.325030] SMP: Total of 4 processors activated. [ 0.325038] CPU features: detected feature: 32-bit EL0 Support [ 0.325300] CPU: All CPU(s) started at EL2 [ 0.325317] alternatives: patching kernel code [ 0.333440] devtmpfs: initialized [ 0.370734] Initilizing CustomIPI irq domain [ 0.371119] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.371141] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.381687] pinctrl core: initialized pinctrl subsystem [ 0.382332] OS set in device tree is not L4T. [ 0.382738] regulator-dummy: no parameters [ 0.383019] Initializing plugin-manager [ 0.383124] Plugin module not found [ 0.383349] node /plugin-manager/fragement@0 match with board >=3448-0002-100 [ 0.383889] node /plugin-manager/fragment@1 match with board >=3448-0002-101 [ 0.384384] node /plugin-manager/fragment@3 match with board >=3448-0002-100 [ 0.385101] node /plugin-manager/fragement@6 match with odm-data enable-tegra-wdt [ 0.385536] node /plugin-manager/fragement@8 match with odm-data enable-tegra-wdt [ 0.386158] node /plugin-manager/fragement@10 match with board >=3448-0002-300 [ 0.388230] node /plugin-manager/fragement@11 match with board >=3448-0002-300 [ 0.391586] NET: Registered protocol family 16 [ 0.392909] pstore: using zlib compression [ 0.392952] console [pstore-1] enabled [ 0.392957] pstore: Registered ramoops as persistent store backend [ 0.392962] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.409060] cpuidle: using governor menu [ 0.413210] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.414826] vdso: 2 pages (1 code @ ffffff8008f47000, 1 data @ ffffff8009e14000) [ 0.414847] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.417491] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.420161] tegra_powergate_init: DONE [ 0.420177] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-b425-0002-p3449-0000-b00.dts [ 0.420183] DTB Build time: Mar 10 2020 11:58:07 [ 0.422014] Tegra reboot handler registered. [ 0.426540] iommu: Adding device tegra-carveouts to group 0 [ 0.426674] platform tegra-carveouts: domain=ffffffc0f9bd8318 allocates as[0]=ffffffc0f9bd40a8 [ 0.427023] iommu: Adding device smmu_test to group 1 [ 0.427072] platform smmu_test: domain=ffffffc0f9bd8558 allocates as[0]=ffffffc0f9bd4110 [ 0.427885] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000 [ 0.427941] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000 [ 0.427994] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000 [ 0.428004] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.428024] mc-err: mcerr ops are set to t21x [ 0.437543] iommu: Adding device 70090000.xusb to group 2 [ 0.437864] iommu: Adding device 70006000.serial to group 3 [ 0.437923] platform 70006000.serial: domain=ffffffc0f9435c18 allocates as[0]=ffffffc0f9bd4178 [ 0.438334] iommu: Adding device 70006040.serial to group 4 [ 0.438579] iommu: Adding device 70006200.serial to group 5 [ 0.438770] iommu: Adding device sound to group 6 [ 0.438823] platform sound: domain=ffffffc0f94ac198 allocates as[0]=ffffffc0f9bd41e0 [ 0.439381] iommu: Adding device 7000d400.spi to group 7 [ 0.439638] iommu: Adding device 7000d600.spi to group 8 [ 0.439992] iommu: Adding device 50000000.host1x to group 9 [ 0.440265] iommu: Adding device 54080000.vi to group 10 [ 0.440672] iommu: Adding device 54600000.isp to group 11 [ 0.440926] iommu: Adding device 54680000.isp to group 12 [ 0.441232] iommu: Adding device tegradc.0 to group 13 [ 0.441280] platform tegradc.0: domain=ffffffc0f94acf18 allocates as[0]=ffffffc0f9bd4248 [ 0.441799] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.442138] iommu: Adding device tegradc.1 to group 14 [ 0.442188] platform tegradc.1: domain=ffffffc0f94b8198 allocates as[0]=ffffffc0f9bd42b0 [ 0.442692] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.442946] iommu: Adding device 54340000.vic to group 15 [ 0.443179] iommu: Adding device 544c0000.nvenc to group 16 [ 0.443376] iommu: Adding device 54500000.tsec to group 17 [ 0.443573] iommu: Adding device 54100000.tsecb to group 18 [ 0.443770] iommu: Adding device 54480000.nvdec to group 19 [ 0.443967] iommu: Adding device 54380000.nvjpg to group 20 [ 0.445060] iommu: Adding device 546c0000.i2c to group 21 [ 0.445426] iommu: Adding device 57000000.gpu to group 22 [ 0.445482] platform 57000000.gpu: domain=ffffffc0f94c7198 allocates as[0]=ffffffc0f9bd4318 [ 0.445520] platform 57000000.gpu: domain=ffffffc0f94c7198 allocates as[1]=ffffffc0f9bd4380 [ 0.445577] platform 57000000.gpu: domain=ffffffc0f94c7198 allocates as[2]=ffffffc0f9bd43e8 [ 0.445614] platform 57000000.gpu: domain=ffffffc0f94c7198 allocates as[3]=ffffffc0f9bd4450 [ 0.446483] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.446495] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.446507] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.446512] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.446516] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.497211] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.497221] tegra-pmc: Clear bootloader IO dpd settings [ 0.497241] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.497310] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.497589] iommu: Adding device 70012000.se to group 23 [ 0.498400] iommu: Adding device 7000c000.i2c to group 24 [ 0.498654] iommu: Adding device 7000c400.i2c to group 25 [ 0.498901] iommu: Adding device 7000c500.i2c to group 26 [ 0.499151] iommu: Adding device 7000c700.i2c to group 27 [ 0.499405] iommu: Adding device 7000d000.i2c to group 28 [ 0.499654] iommu: Adding device 7000d100.i2c to group 29 [ 0.499921] iommu: Adding device sdhci-tegra.3 to group 30 [ 0.499978] platform sdhci-tegra.3: domain=ffffffc0f956b318 allocates as[0]=ffffffc0f9bd44b8 [ 0.500418] iommu: Adding device sdhci-tegra.2 to group 31 [ 0.500485] platform sdhci-tegra.2: domain=ffffffc0f956b558 allocates as[0]=ffffffc0f9bd4520 [ 0.501356] iommu: Adding device 700d0000.xudc to group 32 [ 0.504556] vdd-ac-bat: 5000 mV [ 0.504898] vdd-5v0-sys: 5000 mV [ 0.505860] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.505908] vdd-5v0-hdmi: 5000 mV [ 0.506363] vdd-1v8-sys: 1800 mV [ 0.506752] vdd-fan: supplied by vdd-5v0-sys [ 0.506785] vdd-fan: 5000 mV [ 0.507166] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.507197] vdd-usb-vbus: 5000 mV [ 0.507723] vdd-usb-vbus2: 5000 mV [ 0.538036] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.540425] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.541594] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.541615] GPIO line 152 (camera-control-output-low) hogged as output/low [ 0.541652] GPIO line 6 (system-suspend-gpio) hogged as output/high [ 0.542041] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.549969] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.550339] SCSI subsystem initialized [ 0.550566] libata version 3.00 loaded. [ 0.550848] usbcore: registered new interface driver usbfs [ 0.550898] usbcore: registered new interface driver hub [ 0.550976] usbcore: registered new device driver usb [ 0.555403] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.561106] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.561905] random: fast init done [ 0.562124] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.564998] vdd-ddr-1v1: 1150 mV [ 0.568993] vdd-pre-reg-1v35: 1350 mV [ 0.572989] vdd-1v8: 1800 mV [ 0.576991] avdd-sys-1v2: 1200 mV [ 0.580991] vdd-pex-1v0: 1050 mV [ 0.581606] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.582144] max77620-ldo3: at 3100 mV [ 0.584990] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.585568] max77620-ldo5: at 3100 mV [ 0.588997] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV [ 0.592987] avdd-1v05-pll: 1050 mV [ 0.596991] avdd-io-hdmi-dp: 1050 mV [ 0.599627] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.599896] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.600267] max77620 4-003c: max77620 probe successful [ 0.603003] media: Linux media interface: v0.10 [ 0.603054] Linux video capture interface: v2.00 [ 0.603976] pps_core: LinuxPPS API ver. 1 registered [ 0.603984] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.604007] PTP clock support registered [ 0.607580] tegra_fiq_debugger_init: found FIQ source (IRQ 98) [ 0.613862] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.614645] Advanced Linux Sound Architecture Driver Initialized. [ 0.615268] Bluetooth: Core ver 2.22 [ 0.615318] NET: Registered protocol family 31 [ 0.615321] Bluetooth: HCI device and connection manager initialized [ 0.615334] Bluetooth: HCI socket layer initialized [ 0.615343] Bluetooth: L2CAP socket layer initialized [ 0.615366] Bluetooth: SCO socket layer initialized [ 0.617044] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.617060] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.617104] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.617117] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.620302] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.621492] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.621554] vdd-3v3-sys: 3300 mV [ 0.621819] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.625055] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.625541] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.625579] vdd-3v3-sd: 3300 mV [ 0.626606] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.626643] avdd-io-edp-1v05: 1050 mV [ 0.627055] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.627116] vdd-usb-hub-en: 5000 mV [ 0.628433] camchar: rtcpu character device driver loaded [ 0.629141] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.630447] clocksource: Switched to clocksource arch_sys_counter [ 0.670747] VFS: Disk quotas dquot_6.6.0 [ 0.670870] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.671349] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.671781] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.671799] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.672007] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.672012] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.672025] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.672052] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.672058] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.672072] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.672081] nvmap_page_pool_init: Total RAM pages: 1011432 [ 0.672086] nvmap_page_pool_init: nvmap page pool size: 126429 pages (493 MB) [ 0.672175] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.672713] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB) [ 0.673654] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB) [ 0.681924] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.682356] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.682653] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.682861] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.683038] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.683303] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.683308] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.683745] NET: Registered protocol family 2 [ 0.684784] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.684997] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.685493] TCP: Hash tables configured (established 32768 bind 32768) [ 0.685640] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.685720] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.686136] NET: Registered protocol family 1 [ 0.686996] RPC: Registered named UNIX socket transport module. [ 0.687003] RPC: Registered udp transport module. [ 0.687007] RPC: Registered tcp transport module. [ 0.687011] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.687026] PCI: CLS 0 bytes, default 64 [ 0.687279] Trying to unpack rootfs image as initramfs... [ 0.918857] Freeing initrd memory: 5356K [ 0.928897] host1x 50000000.host1x: initialized [ 0.930748] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.933905] audit: initializing netlink subsys (disabled) [ 0.933975] audit: type=2000 audit(0.783:1): initialized [ 0.934782] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.944871] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.946614] 9p: Installing v9fs 9p2000 file system support [ 0.949905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.950055] io scheduler noop registered [ 0.950341] io scheduler cfq registered (default) [ 0.953176] gic 702f9000.agic: GIC IRQ controller registered [ 0.956220] iommu: Adding device 702ef000.adsp to group 33 [ 0.965246] iommu: Adding device aconnect@702c0000:adsp_audio to group 34 [ 0.965404] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 0.965990] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x81e840f [ 0.965998] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 0.967640] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 0.967746] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 0.967837] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 0.968018] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 0.968106] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 0.968192] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 0.968282] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 0.968366] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 0.968457] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 0.968541] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 0.974704] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 0.976416] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 0.978271] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 0.979553] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 0.979913] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 0.981097] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 0.981319] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 0.981541] Adding domain tsec-pd to PM domain host1x-pd [ 0.983853] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 0.984812] tsec 54500000.tsec: initialized [ 0.986341] tsec 54100000.tsecb: initialized [ 0.987061] Adding domain nvdec-pd to PM domain host1x-pd [ 0.990370] nvdec 54480000.nvdec: initialized [ 0.991448] Adding domain vic03-pd to PM domain host1x-pd [ 0.991627] Adding domain msenc-pd to PM domain host1x-pd [ 0.991787] Adding domain nvjpg-pd to PM domain host1x-pd [ 0.995962] falcon 54340000.vic: initialized [ 0.997194] falcon 544c0000.nvenc: initialized [ 0.998494] falcon 54380000.nvjpg: initialized [ 1.003063] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.003186] display board info: id 0x0, fab 0x0 [ 1.003247] generic_infoframe_type: 0x87 [ 1.003371] tegradc tegradc.0: DT parsed successfully [ 1.003422] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0 [ 1.006922] tegradc tegradc.0: probed [ 1.007647] Console: switching to colour frame buffer device 80x30 [ 1.007684] tegradc tegradc.0: fb registered [ 1.009195] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.009272] tegradc tegradc.1: No lt-data, using default setting [ 1.009302] tegradc tegradc.1: No hpd-gpio in DT [ 1.009335] tegradc tegradc.1: DT parsed successfully [ 1.009384] tegradc tegradc.1: Display dc.ffffff800acc0000 registered with id=1 [ 1.009810] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.011813] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.517607] Host read timeout at address 545c00c4 [ 1.517729] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.518603] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.518773] tegradc tegradc.1: probed [ 1.519051] kfuse 7000fc00.kfuse: initialized [ 1.519127] tegradc tegradc.1: fb registered [ 1.520035] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.520836] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.521976] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.521987] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.522595] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.523137] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.523923] vdd-gpu: applied init 1000000uV constraint [ 1.523932] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.524403] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 1.524415] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.524418] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.524425] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.524431] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.524438] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.524478] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 1.524587] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.524856] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 1.524934] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.525120] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.525166] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.525178] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.525366] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000 [ 1.525420] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 1.525658] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.526834] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.528365] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.528457] No Device Node present for smmu client: serial8250 !! [ 1.528465] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.528503] iommu: Adding device serial8250 to group 35 [ 1.528793] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.530893] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.531078] console [ttyS0] disabled [ 1.531140] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.532581] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.534475] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.536360] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.538574] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.538783] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.538817] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.538851] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 1.538873] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.538893] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.539043] pci 0000:02:00.0: supports D1 D2 [ 1.539047] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.540132] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 5 [ 1.541392] console [ttyS0] enabled [ 1.541808] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.542429] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.542776] serial-tegra 70006200.serial: RX in PIO mode [ 1.542878] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.542901] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 5 [ 1.544054] [drm] Initialized [ 1.544642] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.546538] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.546554] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.546624] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 1.546635] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 1.546641] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.546652] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 1.546681] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.546692] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.546705] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 1.546726] pci 0000:02:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit pref] [ 1.546745] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.546755] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.546760] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 1.546769] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 1.547373] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.547380] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.547390] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 1.547533] aer 0000:00:01.0:pcie002: service driver aer loaded [ 1.547837] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.547843] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.547850] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 1.547982] aer 0000:00:02.0:pcie002: service driver aer loaded [ 1.548271] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.550062] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.551846] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.553742] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.554880] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 5 [ 1.554992] brd: module loaded [ 1.560622] loop: module loaded [ 1.560738] tegra_profiler: version: 1.139, samples/io: 47/27 [ 1.560862] tegra_profiler: auth: init [ 1.562018] THERMAL EST: found 2 subdevs [ 1.562025] THERMAL EST num_resources: 0 [ 1.562031] [THERMAL EST subdev 0] [ 1.562039] [THERMAL EST subdev 1] [ 1.562634] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.562640] THERMAL EST: thz register success. [ 1.562799] THERMAL EST: end of probe, return err: 0 [ 1.564052] hisi_sas: driver version v1.6 [ 1.564360] tegradc tegradc.1: nominal-pclk:533250000 parent:533250000 div:1.0 pclk:533250000 527917500~581242500 [ 1.568493] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.570082] libphy: Fixed MDIO Bus: probed [ 1.570731] tun: Universal TUN/TAP device driver, 1.6 [ 1.570736] tun: (C) 1999-2004 Max Krasnyansky [ 1.572104] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.572110] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.572180] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.572183] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.572233] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.572237] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.572283] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.572288] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.572366] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.573142] r8168 0000:02:00.0: enabling device (0000 -> 0003) [ 1.573173] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.578150] dp lt: state 0 (Reset), pending_lt_evt 1 [ 1.578158] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 1.578164] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.580001] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.580149] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.580155] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.580607] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.580621] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.580634] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.580647] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.580654] dp lt: tx_pu: 0x20 [ 1.591314] dp lt: CR done [ 1.591320] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.591327] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.594714] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node [ 1.594902] r8168 0000:02:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e9:f4:11 from device tree [ 1.595520] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.595581] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.596202] PPP generic driver version 2.4.2 [ 1.596420] PPP BSD Compression module registered [ 1.596426] PPP Deflate Compression module registered [ 1.596466] PPP MPPE Compression module registered [ 1.596473] NET: Registered protocol family 24 [ 1.596545] usbcore: registered new interface driver r8152 [ 1.596595] usbcore: registered new interface driver asix [ 1.596663] usbcore: registered new interface driver ax88179_178a [ 1.596701] usbcore: registered new interface driver cdc_ether [ 1.596733] usbcore: registered new interface driver net1080 [ 1.596774] usbcore: registered new interface driver cdc_subset [ 1.596806] usbcore: registered new interface driver zaurus [ 1.596865] usbcore: registered new interface driver cdc_ncm [ 1.597032] VFIO - User Level meta-driver version: 0.3 [ 1.598315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.598342] ehci-pci: EHCI PCI platform driver [ 1.598391] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.598403] ohci-pci: OHCI PCI platform driver [ 1.598563] ohci-platform: OHCI generic platform driver [ 1.601356] tegra-xusb 70090000.xusb: No USB port has OTG_CAP [ 1.605453] dp lt: CE done [ 1.605464] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.605561] extcon-disp-state extcon:disp-state: cable 46 state 1 [ 1.605566] Extcon AUX0(DP): enable [ 1.605571] dp_audio switch 1 [ 1.605905] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-10-17 15:58:59 UTC, Version: 50.25 release [ 1.605965] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.605995] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.606030] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 1.606037] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 1.606054] usbcore: registered new interface driver uas [ 1.606206] usbcore: registered new interface driver usb-storage [ 1.606471] usbcore: registered new interface driver usbserial [ 1.606786] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.606852] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.607051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.607058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.607063] usb usb1: Product: xHCI Host Controller [ 1.607068] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.607072] usb usb1: SerialNumber: 70090000.xusb [ 1.607748] hub 1-0:1.0: USB hub found [ 1.607792] hub 1-0:1.0: 5 ports detected [ 1.608537] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.608550] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.608706] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.608813] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.608819] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.608824] usb usb2: Product: xHCI Host Controller [ 1.608829] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.608833] usb usb2: SerialNumber: 70090000.xusb [ 1.609313] hub 2-0:1.0: USB hub found [ 1.609358] hub 2-0:1.0: 4 ports detected [ 1.610585] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.611938] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.611953] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.611986] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.612236] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.613087] mousedev: PS/2 mouse device common for all mice [ 1.613242] usbcore: registered new interface driver xpad [ 1.706469] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.706479] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 1.710523] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0 [ 1.710590] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 1.714455] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 1.715815] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.717057] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 5 [ 1.718735] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.720618] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.722503] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.724386] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.726268] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.728155] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.730037] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.732626] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.733866] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 5 [ 1.735541] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.737423] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.739308] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.741190] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.743073] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.744628] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.744960] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.746889] tegradc tegradc.1: dp: aux read defer (0x10020000) -- 6 [ 1.747195] rtc rtc1: alarm rtc device [ 1.747216] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.747248] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.747873] i2c /dev entries driver [ 1.749776] i2c i2c-6: Added multiplexed i2c bus 7 [ 1.750146] i2c i2c-6: Added multiplexed i2c bus 8 [ 1.750156] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter [ 1.750997] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.751933] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.773400] tegradc tegradc.1: nominal-pclk:533333000 parent:533250000 div:1.0 pclk:533250000 527999670~581332970 [ 1.773744] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.774132] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1.774283] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.774353] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.774383] imx219 7-0010: board setup failed [ 1.774477] imx219: probe of 7-0010 failed with error -121 [ 1.774574] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.774932] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.775014] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.775452] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.775890] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.776329] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.776766] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.777204] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.777642] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.778080] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.778457] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.778895] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.779344] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.779782] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.780219] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.780657] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.781095] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.781533] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.781971] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1.782410] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1.782881] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.783325] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.783772] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.784215] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.784667] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c00000 did not specify bpp [ 1.785109] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c00000 did not specify bpp [ 1.785551] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c00000 did not specify bpp [ 1.785995] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.786449] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.786900] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c20000 did not specify bpp [ 1.787342] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c20000 did not specify bpp [ 1.787348] tegradc tegradc.1: blank - powerdown [ 1.798193] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.798261] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.798291] imx219 8-0010: board setup failed [ 1.798348] imx219: probe of 8-0010 failed with error -121 [ 1.799202] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.801167] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.801171] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.801462] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.801474] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.801481] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.801604] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.801612] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.801618] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.801770] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.801778] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.801782] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.801949] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.802524] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.802568] tegra_aotag tegra-aotag: Invalid temp readout [ 1.802588] tegra_aotag tegra-aotag: Invalid temp readout [ 1.802603] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.802611] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.803383] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.803398] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.803549] tegra_aotag tegra-aotag: Invalid temp readout [ 1.803570] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.803920] parse_throttle_dt_data: Num cap clks = 6 [ 1.803924] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.803931] parse_throttle_dt_data: clk=gpu type=4 [ 1.803949] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.803968] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.803987] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.803990] parse_throttle_dt_data: clk=emc type=3 [ 1.805764] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.805855] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.805977] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.806601] FAN dev name: pwm-fan [ 1.806646] FAN:gpio request success. [ 1.806695] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.806926] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.807031] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.807038] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.807111] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.807116] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.807120] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.807125] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.807129] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.807133] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.807137] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.807140] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.807144] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.807148] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.808508] device-mapper: uevent: version 1.0.3 [ 1.808887] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.811612] tegra210-cpufreq cpufreq: probe()...completed [ 1.812321] sdhci: Secure Digital Host Controller Interface driver [ 1.812322] sdhci: Copyright(c) Pierre Ossman [ 1.812324] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.812690] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful [ 1.817546] sdhci-tegra sdhci-tegra.2: Client registration for eMC Successful [ 1.820482] tegra-se 70012000.se: tegra_se_probe: complete [ 1.821011] hidraw: raw HID events driver (C) Jiri Kosina [ 1.822142] usbcore: registered new interface driver usbhid [ 1.822143] usbhid: USB HID core driver [ 1.822217] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1.822220] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1.822223] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.822229] dp lt: link training force disable [ 1.822230] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1.824356] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.824523] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.826341] nvpmodel: initialized successfully [ 1.827380] usbcore: registered new interface driver snd-usb-audio [ 1.827433] No Device Node present for smmu client: snd-soc-dummy !! [ 1.827437] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.827455] iommu: Adding device snd-soc-dummy to group 36 [ 1.833721] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.842591] extcon-disp-state extcon:disp-state: cable 46 state 0 [ 1.842593] Extcon AUX0(DP) disable [ 1.842594] dp_audio switch 0 [ 1.843456] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.843466] tegradc tegradc.1: unblank [ 1.854502] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA 64-bit with 64 bit addr [ 1.866517] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA 64-bit with 64 bit addr [ 1.874100] tegradc tegradc.1: nominal-pclk:533250000 parent:533250000 div:1.0 pclk:533250000 527917500~581242500 [ 1.876706] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.880494] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.886296] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 1.886298] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 1.886301] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.888109] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.888245] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.888248] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.888690] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.888700] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.888710] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.888719] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.888724] dp lt: tx_pu: 0x20 [ 1.899300] dp lt: CR done [ 1.899302] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.899305] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.906846] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.911159] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 1.915391] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB [ 1.916339] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 [ 1.917224] dp lt: CE done [ 1.917227] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.917260] extcon-disp-state extcon:disp-state: cable 46 state 1 [ 1.917262] Extcon AUX0(DP): enable [ 1.917264] dp_audio switch 1 [ 1.917513] tegradc tegradc.1: sync windows ret = 250 [ 1.938543] usb 1-1: new high-speed USB device number 2 using tegra-xusb [ 1.941675] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 1.942110] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1.942546] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.942980] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.943414] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.943848] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.944282] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.944716] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.945150] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.945584] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.946018] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.946455] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.946889] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.947323] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.947757] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.948191] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.948625] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.949059] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 1.949493] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 1.949928] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1.950361] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1.950802] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.951237] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.951676] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.952117] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.952571] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c00000 did not specify bpp [ 1.953007] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c00000 did not specify bpp [ 1.953442] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c00000 did not specify bpp [ 1.953878] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.954313] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.954780] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c20000 did not specify bpp [ 1.955239] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c20000 did not specify bpp [ 1.955242] tegradc tegradc.1: blank - powerdown [ 1.960224] usb 1-1: New USB device found, idVendor=14cd, idProduct=8601 [ 1.960227] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 1.960230] usb 1-1: Product: USB 2.0 Hub [ 1.960233] usb 1-1: Manufacturer: USB Device [ 1.960983] hub 1-1:1.0: USB hub found [ 1.961085] hub 1-1:1.0: 4 ports detected [ 1.963425] mmc1: hw tuning done ... [ 1.963572] mmc1: new HS200 MMC card at address 0001 [ 1.967856] mmcblk1: mmc1:0001 CKTM4R 58.2 GiB [ 1.968021] mmcblk1rpmb: mmc1:0001 CKTM4R partition 3 16.0 MiB [ 1.968772] mmcblk1: p1 [ 2.000755] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 2.000758] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 2.000760] dp lt: state 0 (Reset), pending_lt_evt 0 [ 2.000764] dp lt: link training force disable [ 2.000766] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 2.020952] extcon-disp-state extcon:disp-state: cable 46 state 0 [ 2.020954] Extcon AUX0(DP) disable [ 2.020955] dp_audio switch 0 [ 2.021807] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 2.021816] tegradc tegradc.1: unblank [ 2.052183] tegradc tegradc.1: nominal-pclk:533250000 parent:533250000 div:1.0 pclk:533250000 527917500~581242500 [ 2.054794] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 2.058580] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 2.064394] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 2.064396] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 2.064398] dp lt: state 0 (Reset), pending_lt_evt 0 [ 2.066207] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 2.066343] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 2.066346] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 2.066790] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 2.066800] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 2.066809] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 2.066819] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 2.066823] dp lt: tx_pu: 0x20 [ 2.078451] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 2.079299] dp lt: CR done [ 2.079301] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 2.079304] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 2.093206] dp lt: CE done [ 2.093209] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 2.093238] extcon-disp-state extcon:disp-state: cable 46 state 1 [ 2.093239] Extcon AUX0(DP): enable [ 2.093240] dp_audio switch 1 [ 2.093483] tegradc tegradc.1: sync windows ret = 250 [ 2.093529] extcon-disp-state extcon:disp-state: cable 44 state 1 [ 2.093532] Extcon DP: HPD enabled [ 2.093544] hpd: Display connected, hpd_switch 1 [ 2.093548] hpd: switching from state 2 (Check EDID) to state 4 (Enabled) [ 2.100256] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b [ 2.100260] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.246499] usb 1-1.1: new low-speed USB device number 4 using tegra-xusb [ 2.270218] usb 1-1.1: New USB device found, idVendor=17ef, idProduct=600e [ 2.270224] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.270227] usb 1-1.1: Product: Lenovo Optical Mouse [ 2.274536] input: Lenovo Optical Mouse as /devices/70090000.xusb/usb1/1-1/1-1.1/1-1.1:1.0/0003:17EF:600E.0001/input/input1 [ 2.274765] hid-generic 0003:17EF:600E.0001: input,hidraw0: USB HID v1.11 Mouse [Lenovo Optical Mouse] on usb-70090000.xusb-1.1/input0 [ 2.279396] OPE platform probe [ 2.279483] OPE platform probe successful [ 2.279793] OPE platform probe [ 2.279874] OPE platform probe successful [ 2.309860] rt5640 2-001c: ASoC: no source widget found for Improve HP Amp Drv [ 2.317096] rt5640 2-001c: ASoC: Failed to add route Improve HP Amp Drv -> direct -> HPOL [ 2.325297] rt5640 2-001c: ASoC: no source widget found for Improve HP Amp Drv [ 2.332516] rt5640 2-001c: ASoC: Failed to add route Improve HP Amp Drv -> direct -> HPOR [ 2.342039] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.342165] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.342286] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.342408] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.342543] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.342661] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.342782] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.342900] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.343026] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.343143] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.354541] usb 1-1.4: new low-speed USB device number 5 using tegra-xusb [ 2.358005] input: tegra-snd-t210ref-mobile-rt5639 Headset Jack as /devices/sound/sound/card1/input2 [ 2.358894] u32 classifier [ 2.358896] Actions configured [ 2.358970] Initializing XFRM netlink socket [ 2.359685] NET: Registered protocol family 10 [ 2.360380] NET: Registered protocol family 17 [ 2.360391] NET: Registered protocol family 15 [ 2.360464] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.360512] Bluetooth: RFCOMM socket layer initialized [ 2.360521] Bluetooth: RFCOMM ver 1.11 [ 2.360527] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.360531] Bluetooth: HIDP socket layer initialized [ 2.360549] 9pnet: Installing 9P2000 support [ 2.360587] Key type dns_resolver registered [ 2.360960] Registered cp15_barrier emulation handler [ 2.360966] Registered setend emulation handler [ 2.362021] registered taskstats version 1 [ 2.362683] Adding domain ve2-pd to PM domain host1x-pd [ 2.362930] Adding domain ve-pd to PM domain host1x-pd [ 2.364993] isp 54600000.isp: initialized [ 2.365915] isp 54680000.isp: initialized [ 2.376081] last reset is due to power on reset [ 2.376086] KERNEL: PMC reset status reg: 0x0 [ 2.376167] BL: PMC reset status reg: 0x0 [ 2.376169] BL: PMIC poweroff Event Recorder: 0x40 [ 2.377642] clk_cbus_recalc_rate: no gbus parent [ 2.377648] clk_cbus_round_rate: no gbus parent [ 2.377651] clk_cbus_round_rate: no gbus parent [ 2.377659] clk_cbus_recalc_rate: no gbus parent [ 2.377757] clk_cbus_recalc_rate: no gbus parent [ 2.377760] clk_cbus_round_rate: no gbus parent [ 2.377763] clk_cbus_round_rate: no gbus parent [ 2.377767] clk_cbus_recalc_rate: no gbus parent [ 2.378489] tegra_dvfs: GPU-cap: registered [ 2.378549] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 2.378551] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 2.378554] tegra dvfs: vdd-gpu: nominal 1058mV, offset 708000uV, step 10000uV, scaling enabled [ 2.379964] tegra_dvfs: vdd-gpu-vts: registered [ 2.380309] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 2.380904] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 2.381359] input: gpio-keys as /devices/gpio-keys/input/input3 [ 2.381709] usb 1-1.4: New USB device found, idVendor=04b3, idProduct=3025 [ 2.381713] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.381717] usb 1-1.4: Product: USB NetVista Full Width Keyboard. [ 2.381720] usb 1-1.4: Manufacturer: LITE-ON Technology [ 2.387217] input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/70090000.xusb/usb1/1-1/1-1.4/1-1.4:1.0/0003:04B3:3025.0002/input/input4 [ 2.411380] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:15 UTC (946688415) [ 2.412448] vi 54080000.vi: vi_probe: ++ [ 2.414554] vi 54080000.vi: initialized [ 2.416996] vi 54080000.vi: subdev nvcsi--2 bound [ 2.417097] vi 54080000.vi: subdev nvcsi--1 bound [ 2.417326] mmcblk mmc0:0001: Card claimed for testing. [ 2.417335] mmcblk mmc1:0001: Card claimed for testing. [ 2.418672] Disable partitions left on by BL [ 2.418675] disb [ 2.418721] bwmgr: missing cdev-type property [ 2.418818] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.418825] DRAM derating cdev registered. [ 2.419845] vdd-fan: disabling [ 2.419849] vdd-usb-vbus: disabling [ 2.419851] vdd-usb-vbus2: disabling [ 2.419859] vddio-sdmmc-ap: disabling [ 2.419994] vdd-3v3-sd: disabling [ 2.419999] vdd-usb-hub-en: disabling [ 2.420080] ALSA device list: [ 2.420084] #0: tegra-hda at 0x70038000 irq 82 [ 2.420086] #1: tegra-snd-t210ref-mobile-rt5639 [ 2.423197] Freeing unused kernel memory: 8576K [ 2.444174] Root device found: mmcblk0p1 [ 2.445198] Found dev node: /dev/mmcblk0p1 [ 2.446915] hid-generic 0003:04B3:3025.0002: input,hidraw1: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-70090000.xusb-1.4/input0 [ 2.463406] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.464155] Rootfs mounted over mmcblk0p1 [ 2.480686] Switching from initrd to actual rootfs [ 2.563922] systemd[1]: System time before build time, advancing clock. [ 2.580843] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.591889] cgroup: cgroup2: unknown option "nsdelegate" [ 2.605609] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.606348] systemd[1]: Detected architecture arm64. [ 2.628794] systemd[1]: Set hostname to . [ 2.697029] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.697040] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.754573] systemd[1]: /etc/systemd/system/rc-local.service:11: Support for option SysVStartPriority= has been removed and it is ignored [ 2.795311] random: systemd: uninitialized urandom read (16 bytes read) [ 2.795343] systemd[1]: Reached target Swap. [ 2.795531] random: systemd: uninitialized urandom read (16 bytes read) [ 2.797032] systemd[1]: Created slice User and Session Slice. [ 2.797080] random: systemd: uninitialized urandom read (16 bytes read) [ 2.797206] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.799074] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.857461] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 2.902574] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 3.141300] systemd-journald[2008]: Received request to flush runtime journal from PID 1 [ 3.868702] using random self ethernet address [ 3.882491] using random host ethernet address [ 4.423880] Mass Storage Function, version: 2009/09/11 [ 4.423887] LUN: removable file: (no medium) [ 4.434146] using random self ethernet address [ 4.447658] using random host ethernet address [ 4.590092] rndis0: HOST MAC 2a:95:5e:07:17:a4 [ 4.594579] rndis0: MAC 2a:95:5e:07:17:a5 [ 4.599753] usb0: HOST MAC 2a:95:5e:07:17:a6 [ 4.600030] usb0: MAC 2a:95:5e:07:17:a7 [ 4.600059] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.602940] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.602959] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 4.603021] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.603326] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.603365] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 4.603939] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 4.603962] tegra-xudc-new 700d0000.xudc: entering ELPG [ 4.604189] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 4.607026] random: crng init done [ 4.610431] random: 7 urandom warning(s) missed due to ratelimiting [ 4.631103] l4tbr0: port 1(rndis0) entered blocking state [ 4.631108] l4tbr0: port 1(rndis0) entered disabled state [ 4.631279] device rndis0 entered promiscuous mode [ 4.638389] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 4.649355] l4tbr0: port 2(usb0) entered blocking state [ 4.649361] l4tbr0: port 2(usb0) entered disabled state [ 4.649535] device usb0 entered promiscuous mode [ 4.658943] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 4.719482] compat: loading out-of-tree module taints kernel. [ 4.729089] Loading modules backported from Linux version v5.1.16-0-g8584aaf1c326 [ 4.729094] Backport generated by backports.git v5.1.16-1-0-gcb1dd1a3 [ 4.804765] zram: Added device: zram0 [ 4.806829] zram: Added device: zram1 [ 4.809575] zram: Added device: zram2 [ 4.813361] zram: Added device: zram3 [ 4.846814] zram0: detected capacity change from 0 to 519639040 [ 4.884698] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.896869] cfg80211: Problem loading in-kernel X.509 certificate (-129) [ 4.905943] Adding 507456k swap on /dev/zram0. Priority:5 extents:1 across:507456k SS [ 4.914975] zram1: detected capacity change from 0 to 519639040 [ 4.916789] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 4.957101] Adding 507456k swap on /dev/zram1. Priority:5 extents:1 across:507456k SS [ 4.963636] zram2: detected capacity change from 0 to 519639040 [ 4.980847] Adding 507456k swap on /dev/zram2. Priority:5 extents:1 across:507456k SS [ 4.987934] zram3: detected capacity change from 0 to 519639040 [ 5.017541] Adding 507456k swap on /dev/zram3. Priority:5 extents:1 across:507456k SS [ 5.021729] Intel(R) Wireless WiFi driver for Linux [ 5.021733] Copyright(c) 2003- 2015 Intel Corporation [ 5.021967] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) [ 5.053848] iwlwifi 0000:01:00.0: loaded firmware version 36.9f0a2d68.0 op_mode iwlmvm [ 5.292422] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 5.358698] iwlwifi 0000:01:00.0: base HW address: 34:13:e8:62:b8:c1 [ 5.365408] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.366933] eth0: 0xffffff800a3ca000, 00:04:4b:e9:f4:11, IRQ 406 [ 5.515707] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.516472] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.517369] thermal thermal_zone6: failed to read out thermal zone (-61) [ 5.528996] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi [ 5.771454] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 5.771462] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 5.848563] usbcore: registered new interface driver btusb [ 5.854155] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015 [ 5.855134] Bluetooth: hci0: Device revision is 16 [ 5.855139] Bluetooth: hci0: Secure boot is enabled [ 5.855141] Bluetooth: hci0: OTP lock is disabled [ 5.855144] Bluetooth: hci0: API lock is enabled [ 5.855146] Bluetooth: hci0: Debug lock is disabled [ 5.855150] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 5.858989] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi [ 5.870853] usb usb2: usb_suspend_both: status 0 [ 6.034527] FAN rising trip_level:1 cur_temp:52500 trip_temps[2]:61000 [ 6.127373] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10200000 did not specify bpp [ 6.128314] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 6.128788] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 6.129249] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 6.129708] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 6.130162] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 6.130695] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 6.131180] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 6.131657] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 6.132134] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 6.132609] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 6.133108] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 6.133576] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 6.134030] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 6.134508] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 6.134976] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 6.135459] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 6.135914] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000000 did not specify bpp [ 6.136383] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10000080 did not specify bpp [ 6.136833] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 6.137293] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 6.137825] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 6.138303] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 6.138857] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 6.139338] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c00000 did not specify bpp [ 6.139863] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c00000 did not specify bpp [ 6.140366] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c00000 did not specify bpp [ 6.140841] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 6.141316] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 6.141820] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c20000 did not specify bpp [ 6.142301] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10c20000 did not specify bpp [ 6.277994] tegradc tegradc.1: unblank [ 6.278006] tegradc tegradc.0: blank - powerdown [ 7.003772] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.033099] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.033111] Bluetooth: BNEP socket layer initialized [ 7.231785] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.302571] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.342196] Bluetooth: hci0: Waiting for firmware download to complete [ 7.343105] Bluetooth: hci0: Firmware loaded in 1459665 usecs [ 7.343268] Bluetooth: hci0: Waiting for device to boot [ 7.355198] Bluetooth: hci0: Device booted in 11698 usecs [ 7.356821] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc [ 7.359266] Bluetooth: hci0: Applying Intel DDC parameters completed [ 9.679596] fuse init (API version 7.26) [ 10.413747] tegradc tegradc.0: blank - powerdown [ 10.413757] tegradc tegradc.1: blank - powerdown [ 10.477156] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 10.477159] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 10.477162] dp lt: state 0 (Reset), pending_lt_evt 0 [ 10.477167] dp lt: link training force disable [ 10.477169] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 10.497587] extcon-disp-state extcon:disp-state: cable 46 state 0 [ 10.497590] Extcon AUX0(DP) disable [ 10.497591] dp_audio switch 0 [ 10.553533] tegradc tegradc.1: blank - powerdown [ 10.554022] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 10.554043] tegradc tegradc.1: unblank [ 10.605029] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000 [ 10.607852] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 10.611783] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 10.620034] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 10.620038] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 10.620041] dp lt: state 0 (Reset), pending_lt_evt 0 [ 10.621934] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 10.622089] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 10.622094] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 10.622561] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 10.622572] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 10.622582] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 10.622592] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 10.622597] dp lt: tx_pu: 0x20 [ 10.635408] dp lt: CR done [ 10.635413] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 10.635420] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 10.649465] dp lt: CE done [ 10.649470] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 10.650355] extcon-disp-state extcon:disp-state: cable 46 state 1 [ 10.650358] Extcon AUX0(DP): enable [ 10.650360] dp_audio switch 1 [ 10.658999] tegradc tegradc.1: unblank [ 10.659009] tegradc tegradc.0: blank - powerdown [ 11.126156] wlan0: authenticate with 14:cc:20:ec:77:c1 [ 11.148925] wlan0: send auth to 14:cc:20:ec:77:c1 (try 1/3) [ 11.155097] wlan0: authenticated [ 11.158496] wlan0: associate with 14:cc:20:ec:77:c1 (try 1/3) [ 11.170251] wlan0: RX AssocResp from 14:cc:20:ec:77:c1 (capab=0x411 status=0 aid=2) [ 11.173577] wlan0: associated [ 11.185681] rt5640 2-001c: hp_amp_power on=1 hp_amp_power_count=0 [ 11.197268] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 11.242148] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by 14:cc:20:ec:77:c1 [ 11.650479] rt5640 2-001c: hp_amp_power on=0 hp_amp_power_count=1 [ 11.671566] rt5640 2-001c: hp_amp_power on=1 hp_amp_power_count=0 [ 11.914530] rt5640 2-001c: hp_amp_power on=0 hp_amp_power_count=1 [ 11.947277] rt5640 2-001c: hp_amp_power on=1 hp_amp_power_count=0 [ 13.475291] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 17.434500] rt5640 2-001c: hp_amp_power on=0 hp_amp_power_count=1 [ 190.239185] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 190.239287] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 190.250747] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 190.259282] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 399.175171] FAN cooling trip_level:0 cur_temp:35750 trip_temps[1]:51000 [ 451.035245] rt5640 2-001c: hp_amp_power on=1 hp_amp_power_count=0 [ 535.805614] FAN rising trip_level:1 cur_temp:51000 trip_temps[2]:61000 [ 988.241021] FAN rising trip_level:2 cur_temp:61750 trip_temps[3]:71000 [ 992.240771] rt5640 2-001c: hp_amp_power on=0 hp_amp_power_count=1 [ 995.857323] rt5640 2-001c: hp_amp_power on=1 hp_amp_power_count=0 [ 1001.656301] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 1001.656312] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 1001.668141] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 1001.677927] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 1001.747903] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1011.770922] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1040.068665] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1134.118105] pcieport 0000:00:01.0: AER: Corrected error received: id=0010 [ 1134.118115] pcieport 0000:00:01.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0008(Receiver ID) [ 1134.131943] pcieport 0000:00:01.0: device [10de:0fae] error status/mask=00000001/00002000 [ 1134.141917] pcieport 0000:00:01.0: [ 0] Receiver Error (First) [ 1142.220030] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature 2147483647 forced to 127000 [ 1143.247470] Setting nominal refresh + timings. [ 1143.247508] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1144.747831] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1149.155690] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1151.789860] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1156.434630] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1315.575095] rt5640 2-001c: hp_amp_power on=0 hp_amp_power_count=1 [ 1320.915489] FAN cooling trip_level:1 cur_temp:51250 trip_temps[2]:61000 [ 1329.048421] rt5640 2-001c: hp_amp_power on=1 hp_amp_power_count=0