[0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.034] I> MB1 (prd-version: 2.2.0.0-t194-41334769-3540ffaa) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.060] I> Ram Code : 0x1 [0000.062] I> rst_source: 0x0, rst_level: 0x0 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi using bpmp-dma [0000.078] I> Qspi clock source : pllp [0000.081] I> QSPI Flash Size = 32 MB [0000.085] I> Qspi initialized successfully [0000.088] I> Boot chain mechanism: A/B [0000.092] I> Current Boot-Chain Slot: 0 [0000.096] W> No valid slot number is found in scratch register [0000.101] W> Return default slot: _a [0000.104] I> Qspi flash params source = brbct [0000.111] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.118] I> Temperature = 35000 [0000.121] W> Skipping boost for clk: BPMP_CPU_NIC [0000.125] W> Skipping boost for clk: BPMP_APB [0000.129] W> Skipping boost for clk: AXI_CBB [0000.133] W> Skipping boost for clk: AON_CPU_NIC [0000.138] W> Skipping boost for clk: CAN1 [0000.141] W> Skipping boost for clk: CAN2 [0000.146] I> Boot-device: QSPI (instance: 0) [0000.150] I> Qspi flash params source = mb1bct [0000.154] I> Qspi using bpmp-dma [0000.157] I> Qspi clock source : pllc_out0 [0000.161] I> Qspi reinitialized [0000.163] I> Qspi flash params source = mb1bct [0000.177] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.183] W> Thermal config not found in BCT [0000.192] W> MEMIO rail config not found in BCT [0000.202] I> Qspi flash params source = mb1bct [0000.215] I> Qspi flash params source = mb1bct [0000.248] I> Qspi flash params source = mb1bct [0000.813] I> Qspi flash params source = mb1bct [0000.829] I> Qspi flash params source = mb1bct [0000.863] W> Platform config not found in BCT [0000.890] I> Qspi flash params source = mb1bct [0000.915] I> MB1 done ▒▒▒▒main enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ▒▒ [0000.925] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-f46b9673) [0000.925] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.926] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.927] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.932] W> device prod register failed [0000.936] I> Boot_device: QSPI_FLASH instance: 0 [0000.941] I> qspi flash-0 params source = boot args [0000.946] I> QSPI-0l initialized successfully [0000.949] E> Failed: Unknown device 6 [0000.953] W> Ignoring the unknown storage device error [0000.965] I> Found 42 partitions in QSPI_FLASH (instance 0) [0000.966] W> No valid slot number is found in scratch register [0000.969] W> Return default slot: _a [0000.972] I> Active Boot chain : 0 [0001.583] I> Relocating BR-BCT [0001.585] > DEVICE_PROD: device prod is not initialized. [0001.828] I> Relocating OP-TEE dtb from: 0x6bfff0f0 to 0x70050000, size: 703 [0001.829] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0001.830] I> [1] START: 0xaf200000, SIZE: 0x18a00000 [0001.830] I> dram_block larger than 80000000 [0001.830] I> [2] START: 0x100000000, SIZE: 0x180000000 [0001.834] I> Setting NS memory ranges to OP-TEE dtb finished. [0001.934] I> EKB detected (length: 0x410) @ VA:0x526ff400 [0001.935] I> Setting EKB blob info to OPTEE dtb finished. ▒▒NOTICE: BL31: v2.5(release):ef8af0b99 NOTICE: BL31: Built : 20:57:59, May 16 2022 I/TC: ▒▒ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ▒▒I/TC: No▒▒clk_early initialized ▒▒n-secu▒▒mail_early initialized ▒▒r▒▒fuse initialized hwwdt initialized ▒▒e ext▒▒t194_ec_get_ec_list: found 45 ecs ▒▒ernal DT f▒▒ec initialized vmon_setup_monitors: found 3 monitors vmon initialized ▒▒ound▒▒adc initialized fmon_populate_monitors: found 73 monitors ▒▒ ▒▒fmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized ▒▒I/TC: OP-TEE version: 6f444acf (gcc version 9.3.0 (Buildroot 2020.08)) #2 Tue May 17 04:00:18 UTC 2022 aa▒▒dvs initialized ▒▒rc▒▒pm initialized ▒▒h▒▒suspend initialized ▒▒64 ▒▒pg_late initialized ▒▒▒▒pg_mrq_init initialized strap initialized ▒▒I▒▒nvl initialized ▒▒/TC: Pr▒▒emc initialized emc_mrq initialized ▒▒imary CPU initializing ▒▒clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized clk_dt_late initialized noc_late initialized pm_post initialized dbells initialized dmce initialized cvc initialized avfs_clk_mach_post initialized avfs_clk_platform_post initialized cvc_late initialized regulator_post initialized rm initialized console_late initialized clk_dt_post initialized mc_reg initialized pg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ▒▒I/TC: Primary CPU switching to normal world boot ▒▒ Jetson UEFI firmware (version r34.1-975eef6 built on 2022-05-16T20:58:45-07:00) Jetson UEFI firmware (version r34.1-975eef6 built on 2022-05-16T20:58:45-07:00) Press ESCAPE for boot options ** WARNING: Test Key is used. ** ...... L4T boot options 0: primary kernel 1: test kernel Press 0-1 to boot selection within 3.0 seconds. Press any other key to boot default (Option: 0) EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ▒▒I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ▒▒[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.65-tegra (buildbrain@mobile-u64-5414-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Mon May 16 20:58:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x276c65118 SMBIOS=0xc7db0000 SMBIOS 3.0=0x253a00000 MEMATTR=0x252ff4018 ESRT=0x25302a298 RNG=0x25494ff18 MEMRESERVE=0x252ffdf18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025302a298 to 0x000000025302a2d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000252faffff] [ 0.000000] node 0: [mem 0x0000000252fb0000-0x0000000252fdffff] [ 0.000000] node 0: [mem 0x0000000252fe0000-0x0000000252ffffff] [ 0.000000] node 0: [mem 0x0000000253000000-0x000000025301ffff] [ 0.000000] node 0: [mem 0x0000000253020000-0x0000000253627fff] [ 0.000000] node 0: [mem 0x0000000253628000-0x00000002537a7fff] [ 0.000000] node 0: [mem 0x00000002537a8000-0x00000002539effff] [ 0.000000] node 0: [mem 0x00000002539f0000-0x0000000253a0ffff] [ 0.000000] node 0: [mem 0x0000000253a10000-0x000000025413ffff] [ 0.000000] node 0: [mem 0x0000000254140000-0x000000025434ffff] [ 0.000000] node 0: [mem 0x0000000254350000-0x00000002543fffff] [ 0.000000] node 0: [mem 0x0000000254400000-0x000000025458ffff] [ 0.000000] node 0: [mem 0x0000000254590000-0x00000002545dffff] [ 0.000000] node 0: [mem 0x00000002545e0000-0x000000025484ffff] [ 0.000000] node 0: [mem 0x0000000254850000-0x00000002548effff] [ 0.000000] node 0: [mem 0x00000002548f0000-0x00000002549effff] [ 0.000000] node 0: [mem 0x00000002549f0000-0x0000000254a0ffff] [ 0.000000] node 0: [mem 0x0000000254a10000-0x0000000254a1ffff] [ 0.000000] node 0: [mem 0x0000000254a20000-0x0000000254a6ffff] [ 0.000000] node 0: [mem 0x0000000254a70000-0x0000000254b0ffff] [ 0.000000] node 0: [mem 0x0000000254b10000-0x0000000254bfffff] [ 0.000000] node 0: [mem 0x0000000254c00000-0x0000000254c9ffff] [ 0.000000] node 0: [mem 0x0000000254ca0000-0x0000000254d3ffff] [ 0.000000] node 0: [mem 0x0000000254d40000-0x0000000254ddffff] [ 0.000000] node 0: [mem 0x0000000254de0000-0x0000000254e3ffff] [ 0.000000] node 0: [mem 0x0000000254e40000-0x0000000254f2ffff] [ 0.000000] node 0: [mem 0x0000000254f30000-0x000000025570ffff] [ 0.000000] node 0: [mem 0x0000000255710000-0x00000002558effff] [ 0.000000] node 0: [mem 0x00000002558f0000-0x000000027bc4ffff] [ 0.000000] node 0: [mem 0x000000027bc50000-0x000000027bc9ffff] [ 0.000000] node 0: [mem 0x000000027bca0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 31 pages/cpu s90008 r8192 d28776 u126976 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839269 [ 0.000000] Kernel command line: root=PARTUUID=e377ee8f-f0d6-4744-ad73-1ce5b550e015 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 nv-auto-config [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x000000009f000000-0x00000000af000000] (256MB) [ 0.000000] Memory: 6942252K/7473856K available (18496K kernel code, 3214K rwdata, 7092K rodata, 3968K init, 1070K bss, 466068K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x378/0x4f4 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000847] Console: colour dummy device 80x25 [ 0.003017] printk: console [tty0] enabled [ 0.003111] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.003162] pid_max: default: 32768 minimum: 301 [ 0.003353] LSM: Security Framework initializing [ 0.003479] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003538] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006800] rcu: Hierarchical SRCU implementation. [ 0.007258] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.008272] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0000-p3509-0000.dts [ 0.008319] DTB Build time: Apr 6 2022 11:59:20 [ 0.011373] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011723] Remapping and enabling EFI services. [ 0.013693] smp: Bringing up secondary CPUs ... [ 0.043073] Detected PIPT I-cache on CPU1 [ 0.043144] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072886] Detected PIPT I-cache on CPU2 [ 0.072956] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102599] Detected PIPT I-cache on CPU3 [ 0.102659] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132415] Detected PIPT I-cache on CPU4 [ 0.132486] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162140] Detected PIPT I-cache on CPU5 [ 0.162202] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162561] smp: Brought up 1 node, 6 CPUs [ 0.162810] SMP: Total of 6 processors activated. [ 0.162870] CPU features: detected: Privileged Access Never [ 0.162900] CPU features: detected: LSE atomic instructions [ 0.162939] CPU features: detected: User Access Override [ 0.162959] CPU features: detected: 32-bit EL0 Support [ 0.162975] CPU features: detected: RAS Extension Support [ 0.162990] CPU features: detected: CRC32 instructions [ 0.163006] CPU features: detected: 32-bit EL1 Support [ 0.258197] CPU: All CPU(s) started at EL2 [ 0.264458] devtmpfs: initialized [ 0.314760] Registered cp15_barrier emulation handler [ 0.314900] Registered setend emulation handler [ 0.314928] KASLR enabled [ 0.315263] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.315296] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.316793] pinctrl core: initialized pinctrl subsystem [ 0.318067] SMBIOS 3.0.0 present. [ 0.318109] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS r34.1-975eef6 05/16/2022 [ 0.319195] NET: Registered protocol family 16 [ 0.321494] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.322231] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.323228] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.323302] audit: initializing netlink subsys (disabled) [ 0.323667] audit: type=2000 audit(0.320:1): state=initialized audit_enabled=0 res=1 [ 0.325794] printk: console [ramoops-1] enabled [ 0.325819] pstore: Registered ramoops as persistent store backend [ 0.325841] ramoops: using 0x200000@0xca600000, ecc: 0 [ 0.326444] thermal_sys: Registered thermal governor 'step_wise' [ 0.326454] thermal_sys: Registered thermal governor 'power_allocator' [ 0.326476] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.328156] cpuidle: using governor menu [ 0.328515] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.329113] ASID allocator initialised with 65536 entries [ 0.329386] Serial: AMBA PL011 UART driver [ 0.332781] Tegra reboot handler registered. [ 0.333022] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0000-p3509-0000.dts [ 0.333065] DTB Build time: Apr 6 2022 11:59:20 [ 0.414027] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.414463] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.414763] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.414986] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.415196] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.418955] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c10000 [ 0.419028] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c20000 [ 0.419084] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c30000 [ 0.419182] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c40000 [ 0.419253] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c50000 [ 0.419329] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2b80000 [ 0.419390] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2b90000 [ 0.419440] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2ba0000 [ 0.419490] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2bb0000 [ 0.419547] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1700000 [ 0.419599] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1710000 [ 0.419643] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1720000 [ 0.419684] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1730000 [ 0.419735] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1740000 [ 0.419777] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1750000 [ 0.419819] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1760000 [ 0.419860] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1770000 [ 0.419996] mc-err: mcerr ops are set to t19x [ 0.435977] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.436024] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.436046] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.436066] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.443402] ACPI: Interpreter disabled. [ 0.444795] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.446361] iommu: Default domain type: Translated [ 0.446433] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.446993] SCSI subsystem initialized [ 0.447180] usbcore: registered new interface driver usbfs [ 0.447231] usbcore: registered new interface driver hub [ 0.447276] usbcore: registered new device driver usb [ 0.447876] mc: Linux media interface: v0.10 [ 0.447918] videodev: Linux video capture interface: v2.00 [ 0.448386] pps_core: LinuxPPS API ver. 1 registered [ 0.448410] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.448440] PTP clock support registered [ 0.449465] Registered efivars operations [ 0.449944] FPGA manager framework [ 0.450300] Advanced Linux Sound Architecture Driver Initialized. [ 0.451036] Bluetooth: Core ver 2.22 [ 0.451085] NET: Registered protocol family 31 [ 0.451106] Bluetooth: HCI device and connection manager initialized [ 0.451130] Bluetooth: HCI socket layer initialized [ 0.451151] Bluetooth: L2CAP socket layer initialized [ 0.451178] Bluetooth: SCO socket layer initialized [ 0.452811] camchar: rtcpu character device driver loaded [ 0.453718] clocksource: Switched to clocksource arch_sys_counter [ 0.841356] VFS: Disk quotas dquot_6.6.0 [ 0.841455] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.841949] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.842459] pnp: PnP ACPI: disabled [ 0.843083] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 0.843124] nvmap_page_pool_init: Total RAM pages: 1751947 [ 0.843144] nvmap_page_pool_init: nvmap page pool size: 218993 pages (855 MB) [ 0.843387] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.843664] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 0.854083] la/ptsa driver initialized. [ 0.854232] NET: Registered protocol family 2 [ 0.854470] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.862017] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.862114] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.862563] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.863192] TCP: Hash tables configured (established 65536 bind 65536) [ 0.863326] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.863466] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.863720] NET: Registered protocol family 1 [ 0.864700] RPC: Registered named UNIX socket transport module. [ 0.864761] RPC: Registered udp transport module. [ 0.864780] RPC: Registered tcp transport module. [ 0.864798] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.864834] PCI: CLS 0 bytes, default 64 [ 0.865075] Trying to unpack rootfs image as initramfs... [ 1.118780] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.121314] Freeing initrd memory: 8196K [ 1.126479] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.126522] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.126565] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.126933] kvm [1]: IPA Size Limit: 40 bits [ 1.127400] kvm [1]: vgic interrupt IRQ9 [ 1.127942] kvm [1]: VHE mode initialized successfully [ 1.129663] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.135434] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.136395] NFS: Registering the id_resolver key type [ 1.136434] Key type id_resolver registered [ 1.136452] Key type id_legacy registered [ 1.136543] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.136571] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.136609] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.146391] NET: Registered protocol family 38 [ 1.146479] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239) [ 1.146739] io scheduler mq-deadline registered [ 1.146763] io scheduler kyber registered [ 1.152623] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.155636] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.155752] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.155829] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.155916] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.156006] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.161970] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.161984] scrncapt: init (heads:4 wins:6 planes:4) [ 1.163138] EINJ: ACPI disabled. [ 1.166522] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.166552] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 1.166571] tegra-pmc: ### PMC reset level: L0 [ 1.166590] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.166648] tegra-pmc: PMC Prod config success [ 1.171830] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.696567] random: fast init done [ 2.763644] printk: console [ttyTCU0] enabled [ 2.769848] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.774021] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.778562] arm-smmu 10000000.iommu: stage 1 translation [ 2.784331] arm-smmu 10000000.iommu: stage 2 translation [ 2.789586] arm-smmu 10000000.iommu: nested translation [ 2.794926] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.802106] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.811600] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.815572] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.821875] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.829820] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.834949] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.839645] arm-smmu 12000000.iommu: stage 1 translation [ 2.845410] arm-smmu 12000000.iommu: stage 2 translation [ 2.850907] arm-smmu 12000000.iommu: nested translation [ 2.856007] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.863181] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.872835] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.876314] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.883122] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.890637] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.899778] tegra_profiler: version: 1.146, samples/io: 49/28 [ 2.903317] tegra_profiler: auth: init [ 2.907490] THERMAL EST: found 3 subdevs [ 2.911219] THERMAL EST num_resources: 0 [ 2.914821] [THERMAL EST subdev 0] [ 2.918404] [THERMAL EST subdev 1] [ 2.921520] [THERMAL EST subdev 2] [ 2.924782] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.931232] THERMAL EST: thz register success. [ 2.935477] THERMAL EST: end of probe, return err: 0 [ 2.944537] libphy: Fixed MDIO Bus: probed [ 2.945120] tun: Universal TUN/TAP device driver, 1.6 [ 2.951400] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.957111] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.962885] e1000e: Intel(R) PRO/1000 Network Driver [ 2.967560] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.973460] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.979190] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.985274] PPP generic driver version 2.4.2 [ 2.989325] PPP BSD Compression module registered [ 2.993936] PPP Deflate Compression module registered [ 2.999153] PPP MPPE Compression module registered [ 3.004204] usbcore: registered new interface driver r8152 [ 3.009978] usbcore: registered new interface driver asix [ 3.015099] usbcore: registered new interface driver ax88179_178a [ 3.021222] usbcore: registered new interface driver cdc_ether [ 3.027198] usbcore: registered new interface driver net1080 [ 3.032780] usbcore: registered new interface driver cdc_subset [ 3.039066] usbcore: registered new interface driver zaurus [ 3.044512] usbcore: registered new interface driver cdc_ncm [ 3.050444] usbcore: registered new interface driver aqc111 [ 3.056135] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.061902] ohci-pci: OHCI PCI platform driver [ 3.066203] ohci-platform: OHCI generic platform driver [ 3.072220] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.078084] usbcore: registered new interface driver uas [ 3.082755] usbcore: registered new interface driver usb-storage [ 3.088879] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.094490] mousedev: PS/2 mouse device common for all mice [ 3.099691] usbcore: registered new interface driver xpad [ 3.107999] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.110664] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:24 UTC (24) [ 3.118471] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.124686] i2c /dev entries driver [ 3.128358] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.134159] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.139127] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.144598] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.149956] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.155447] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.160864] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.174971] device-mapper: uevent: version 1.0.3 [ 3.175426] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.180961] cpuidle: Initializing cpuidle driver [ 3.185501] sdhci: Secure Digital Host Controller Interface driver [ 3.190298] sdhci: Copyright(c) Pierre Ossman [ 3.194361] Synopsys Designware Multimedia Card Interface Driver [ 3.200363] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.206829] sdhci-tegra 3400000.sdhci: Adding to iommu group 3 [ 3.212030] pstore: ignoring unexpected backend 'efi' [ 3.217534] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.224961] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.245931] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x2 [ 3.256565] vdd-1v0: supplied by regulator-dummy [ 3.262302] vdd-1v8-hs: supplied by regulator-dummy [ 3.267401] vdd-1v8-ls: supplied by regulator-dummy [ 3.272490] vdd-1v8-ao: supplied by regulator-dummy [ 3.276630] vddio-ddr-1v1: supplied by regulator-dummy [ 3.281583] vdd-rtc: supplied by regulator-dummy [ 3.283591] spmic-ldo1: supplied by regulator-dummy [ 3.285321] vdd-ao-3v3: supplied by regulator-dummy [ 3.291925] vddio-emmc-3v3: supplied by regulator-dummy [ 3.298479] spmic-ldo4: supplied by regulator-dummy [ 3.300304] vdd-usb-3v3: supplied by regulator-dummy [ 3.307223] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.313904] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.319879] spmic-ldo8: supplied by vdd-1v8-ls [ 3.321915] gpio-510 (gpio_default): hogged as output/high [ 3.323731] gpio-511 (gpio_default): hogged as output/high [ 3.326549] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.461891] max77686-rtc max77620-rtc: registered as rtc0 [ 3.463213] max77620-power max20024-power: Event recorder REG_NVERC : 0x40 [ 3.463628] max77620 4-003c: max77620 probe successful ▒▒WARNING: clock_get_rate: clk_power_ungate on gated domain 27 for gpcclk rm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ▒▒[ 4.206214] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.207575] hid: raw HID events driver (C) Jiri Kosina [ 4.208520] usbcore: registered new interface driver usbhid [ 4.208682] usbhid: USB HID core driver [ 4.210730] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.211930] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ▒▒[ 25.095306] Camera-FW on t194-rce-safe started TCU early console enabled. [ 25.167118] Camera-FW on t194-rce-safe ready SHA1=82ae0be0 (crt 0.761 ms, total boot 72.601 ms) ▒▒[ 4.293300] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.294000] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.294831] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.295518] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.296780] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.297402] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.298044] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.299505] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.299899] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.301864] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=82ae0be041c774c05e582b08ce8b33b9db5d3526 [ 4.309928] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.316883] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.321173] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.327468] denver_knobs_init:MTS_VERSION:55637613 [ 4.338520] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 4.338840] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 4.348002] t19x_cache tegra-cache: probed [ 4.354462] optee: probing for conduit method. [ 4.355287] optee: revision 3.13 (6f444acf) [ 4.356355] optee: dynamic shared memory is enabled [ 4.363968] optee: initialized driver [ 4.370331] nvpmodel: initialized successfully [ 4.371875] tegra_hv: get_hvd: not initialized yet [ 4.375963] user_ivc_mempool: hypervisor not present [ 4.382418] usbcore: registered new interface driver snd-usb-audio [ 4.388680] u32 classifier [ 4.390267] input device check on [ 4.393574] Actions configured [ 4.397291] Initializing XFRM netlink socket [ 4.402049] NET: Registered protocol family 10 [ 4.408035] Segment Routing with IPv6 [ 4.409627] NET: Registered protocol family 17 [ 4.413776] NET: Registered protocol family 15 [ 4.418489] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.431744] Bluetooth: RFCOMM socket layer initialized [ 4.436536] Bluetooth: RFCOMM ver 1.11 [ 4.440594] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.446194] Bluetooth: HIDP socket layer initialized [ 4.452109] 9pnet: Installing 9P2000 support [ 4.455612] Key type dns_resolver registered [ 4.461172] registered taskstats version 1 [ 4.464854] pstore: Using crash dump compression: deflate [ 4.470197] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.480208] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.482620] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.491458] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.499744] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.617810] tegra194-pcie 14160000.pcie: Link up [ 4.620826] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.621163] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.621334] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.621618] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.622032] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.622433] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.622935] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.632903] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.633354] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.633939] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.635585] pci 0004:01:00.0: supports D1 D2 [ 4.635796] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.644763] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.645067] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.645359] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.645915] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.646242] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.646469] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.652663] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.659995] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.668281] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.678007] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.682927] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.688531] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.695154] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.704379] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.706336] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.714737] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.723440] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 4.837940] tegra194-pcie 141a0000.pcie: Link up [ 4.840761] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 4.841107] pci_bus 0005:00: root bus resource [bus 00-ff] [ 4.841276] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 4.841569] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 4.841884] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 4.842307] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 4.842781] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 4.852470] pci 0005:01:00.0: [144d:a808] type 00 class 0x010802 [ 4.852905] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.862544] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 4.862983] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f40003fff 64bit] [ 4.863402] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 4.863631] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 4.864072] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 4.864491] pci 0005:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 [ 4.865917] pcieport 0005:00:00.0: Adding to iommu group 7 [ 4.867315] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 4.873535] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 4.879514] nvme 0005:01:00.0: Adding to iommu group 7 [ 4.884730] nvme nvme0: pci function 0005:01:00.0 [ 4.888641] nvme 0005:01:00.0: enabling device (0000 -> 0002) [ 4.899136] nvme nvme0: missing or invalid SUBNQN field. [ 4.899629] nvme nvme0: Shutdown timeout set to 8 seconds [ 4.918418] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 4.922352] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 4.923144] host1x 13e10000.host1x: Adding to iommu group 8 [ 4.926361] nvme nvme0: 6/0/0 default/read/poll queues [ 4.942273] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 4.947235] host1x 13e10000.host1x: initialized [ 4.949052] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 4.950022] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 4.955897] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 4.962466] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 4.972440] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 4.979154] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 4.989460] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 4.995927] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.006366] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.012944] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.022791] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.030040] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.039930] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.046982] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.056711] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.063904] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.073919] falcon 15340000.vic: Adding to iommu group 17 [ 5.087923] falcon 15340000.vic: initialized [ 5.088887] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.094580] falcon 15380000.nvjpg: initialized [ 5.095353] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.106746] falcon 154c0000.nvenc: initialized [ 5.107326] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.117558] falcon 15a80000.nvenc1: initialized [ 5.118133] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.129908] nvdec 15480000.nvdec: initialized [ 5.130497] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.139874] nvdec 15140000.nvdec1: initialized [ 5.140340] tsec 15500000.tsec: Adding to iommu group 18 [ 5.145593] tsec 15500000.tsec: initialized [ 5.146170] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.154157] tsec 15100000.tsecb: initialized [ 5.158707] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.180927] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.193148] gpio-374 (wifi-enable): hogged as output/high [ 5.193421] gpio-431 (camera-control-output-low): hogged as output/low [ 5.193783] gpio-432 (camera-control-output-low): hogged as output/low [ 5.195583] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.197243] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.198334] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.205561] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.210983] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.216831] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.222607] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.230946] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.237812] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.248788] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.254361] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.259926] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.268772] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.278870] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.285001] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.293192] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.298903] scare-pigeon 13e10000.host1x:vi-thi@15f00000: grid-of-semaphores not supported [ 5.307545] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.317189] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.323362] scare-pigeon 13e10000.host1x:isp-thi@14b00000: grid-of-semaphores not supported [ 5.332016] pva 16000000.pva0: Adding to iommu group 22 [ 5.359023] pva 16000000.pva0: initialized [ 5.363690] pva 16800000.pva1: Adding to iommu group 23 [ 5.377625] pva 16800000.pva1: initialized [ 5.381812] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.395088] nvdla 15880000.nvdla0: initialized [ 5.396338] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.407250] nvdla 158c0000.nvdla1: initialized [ 5.411285] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.411695] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.412372] tegradccommon 15200000.display-hub: dma mapping done [ 5.412572] tegradc 15200000.display: Adding to iommu group 26 [ 5.414353] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.414826] generic_infoframe_type: 0x87 [ 5.415137] tegradc 15200000.display: DT parsed successfully [ 5.415236] tegradc 15210000.display: Adding to iommu group 26 [ 5.415444] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 5.419829] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.430281] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.433837] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.442369] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 5.442380] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 5.443207] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 5.447973] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.456109] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 5.460226] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 5.464493] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.470660] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 5.476270] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.484703] tegradc 15210000.display: disp0 connected to head1->sor [ 5.489362] tegra_cec 3960000.tegra_cec: probed [ 5.495128] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 5.503250] kfuse 3830000.kfuse: initialized [ 5.507919] tegradc 15210000.display: DT parsed successfully [ 5.514660] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.518706] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=0 [ 5.525997] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.532116] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.536780] serial-tegra 3100000.serial: Adding to iommu group 2 [ 5.542733] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 5.542743] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 5.543820] tegradc 15210000.display: vblank syncpt # 11 for dc 1 [ 5.551775] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 5.556920] tegradc 15210000.display: vpulse3 syncpt # 12 for dc 1 [ 5.574408] tegradc 15210000.display: probed [ 5.582080] serial-tegra 3110000.serial: Adding to iommu group 2 [ 5.619870] Console: switching to colour frame buffer device 80x30 [ 5.620285] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 5.625032] tegradc 15210000.display: fb registered [ 5.635141] serial-tegra 3140000.serial: Adding to iommu group 2 [ 5.643452] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 5.645884] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 5.652153] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 5.668848] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 5.671860] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 5.683832] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.683920] tegradc 15210000.display: blank - powerdown [ 5.683937] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 5.684848] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 5.689316] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 5.689326] Extcon DP: HPD disabled [ 5.689333] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 5.689364] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 5.694689] tegra-xusb 3610000.xhci: irq 187, io mem 0x03610000 [ 5.701696] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 5.711737] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.756880] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.764427] usb usb1: Product: xHCI Host Controller [ 5.769206] usb usb1: Manufacturer: Linux 5.10.65-tegra xhci-hcd [ 5.775449] usb usb1: SerialNumber: 3610000.xhci [ 5.781319] hub 1-0:1.0: USB hub found [ 5.784188] hub 1-0:1.0: 4 ports detected [ 5.788914] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.793350] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 5.801092] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 5.808707] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 5.816444] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.823729] usb usb2: Product: xHCI Host Controller [ 5.828396] usb usb2: Manufacturer: Linux 5.10.65-tegra xhci-hcd [ 5.834605] usb usb2: SerialNumber: 3610000.xhci [ 5.840091] hub 2-0:1.0: USB hub found [ 5.843328] hub 2-0:1.0: 4 ports detected [ 5.884789] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 5.891300] i2c i2c-2: Added multiplexed i2c bus 9 [ 5.892886] i2c i2c-2: Added multiplexed i2c bus 10 [ 5.893075] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 5.908330] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1305000 KHz, changing to: 1344000 KHz [ 5.911044] irq: IRQ261: trimming hierarchy from :pmc@c360000 [ 5.911470] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 5.911577] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 5.911737] sdhci-tegra 3400000.sdhci: BWMGR client registration for eMC Successful [ 5.912792] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 5.919816] tegra194-vi5 15c10000.vi: initialized [ 5.920854] tegradc 15200000.display: disp1 connected to head0->sor1 [ 5.921677] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 5.921735] irq: IRQ262: trimming hierarchy from :pmc@c360000 [ 5.921818] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 262 [ 5.923376] generic_infoframe_type: 0x87 [ 5.929453] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 5.935055] tegradc 15200000.display: DT parsed successfully [ 5.941443] nvethernet 2490000.ethernet: failed to read MDIO address [ 5.945296] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=1 [ 5.953505] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 5.957472] mmc0: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit [ 5.959156] tegradc 15200000.display: vblank syncpt # 13 for dc 0 [ 5.965471] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 5.965480] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 5.973449] tegradc 15200000.display: vpulse3 syncpt # 14 for dc 0 [ 5.985764] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 5.989504] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 5.994302] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.000647] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.018325] tegradc 15200000.display: probed [ 6.019812] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.045743] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.047259] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:3d:8b:de [ 6.066938] tegradc 15200000.display: fb registered [ 6.072145] nvethernet 2490000.ethernet: Macsec not supported [ 6.072199] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.079244] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.085045] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.092577] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.097505] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.103022] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.116191] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.119987] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.124007] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.133759] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.139298] tegra-se-nvhost 15810000.se: initialized [ 6.148144] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.150888] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.156516] Extcon AUX1(HDMI) enable [ 6.167089] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.170861] mmc0: host does not support reading read-only switch, assuming write-enable [ 6.173534] tegra-se-nvhost 15820000.se: initialized [ 6.188090] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.192559] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.198694] tegra-se-nvhost 15830000.se: initialized [ 6.204634] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.209904] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.216006] tegra-se-nvhost 15840000.se: initialized [ 6.222388] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.228052] tegra_actmon d230000.actmon: in actmon_register()... [ 6.232773] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.238533] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.241385] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.246619] hvc_sysfs: hypervisor is not present [ 6.254072] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.265780] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.270499] usb 1-2: Manufacturer: Generic [ 6.276840] hub 1-2:1.0: USB hub found [ 6.279622] hub 1-2:1.0: 4 ports detected [ 6.282648] ALSA device list: [ 6.285627] No soundcards found. [ 6.290205] Freeing unused kernel memory: 3968K [ 6.298587] tegradc 15200000.display: blank - powerdown [ 6.301835] Run /init as init process [ 6.333544] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 6.334094] mmcblk0: mmc0:aaaa SN64G 59.5 GiB [ 6.344286] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.344290] Extcon AUX1(HDMI) disable [ 6.344760] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 6.358614] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.367713] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.368809] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.395843] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.395851] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.395854] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.395858] usb 2-3: Manufacturer: Generic [ 6.406701] hub 2-3:1.0: USB hub found [ 6.408638] hub 2-3:1.0: 4 ports detected [ 6.428520] tegradc 15200000.display: unblank [ 6.430011] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.430211] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.436063] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.454401] tegradc 15200000.display: sync windows ret = 246 [ 6.482342] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 6.489478] Extcon HDMI: HPD enabled [ 6.493389] tegradc 15200000.display: hdmi: plugged [ 6.497791] tegra_cec 3960000.tegra_cec: physical address: 00:00. [ 6.513776] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.529244] Root device found: PARTUUID=e377ee8f-f0d6-4744-ad73-1ce5b550e015 [ 6.562344] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 6.562605] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 6.667081] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 6.667294] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.667454] usb 1-3: Product: Bluetooth Radio [ 6.667555] usb 1-3: Manufacturer: Realtek [ 6.667647] usb 1-3: SerialNumber: 00e04c000001 [ 7.001809] usb 1-2.4: new full-speed USB device number 4 using tegra-xusb [ 7.026291] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.036412] Rootfs mounted over PARTUUID=e377ee8f-f0d6-4744-ad73-1ce5b550e015 [ 7.059289] Switching from initrd to actual rootfs [ 7.111050] usb 1-2.4: New USB device found, idVendor=413c, idProduct=1005, bcdDevice=59.00 [ 7.111272] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.111433] usb 1-2.4: Product: Dell Multimedia Pro Keyboard Hub [ 7.111568] usb 1-2.4: Manufacturer: Dell [ 7.113747] hub 1-2.4:1.0: USB hub found [ 7.113989] hub 1-2.4:1.0: 3 ports detected [ 7.138481] systemd[1]: System time before build time, advancing clock. [ 7.179710] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.181685] systemd[1]: Detected architecture arm64. [ 7.205836] systemd[1]: Set hostname to . [ 7.401773] usb 1-2.4.1: new low-speed USB device number 5 using tegra-xusb [ 7.507988] usb 1-2.4.1: New USB device found, idVendor=413c, idProduct=2011, bcdDevice=59.00 [ 7.508202] usb 1-2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.508382] usb 1-2.4.1: Product: Dell Multimedia Pro Keyboard [ 7.508512] usb 1-2.4.1: Manufacturer: Dell [ 7.516417] input: Dell Dell Multimedia Pro Keyboard as /devices/platform/3610000.xhci/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.0/0003:413C:2011.0001/input/input1 [ 7.574090] hid-generic 0003:413C:2011.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell Multimedia Pro Keyboard] on usb-3610000.xhci-2.4.1/input0 [ 7.575534] random: systemd: uninitialized urandom read (16 bytes read) [ 7.575895] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.576158] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.580341] systemd[1]: Created slice system-modprobe.slice. [ 7.581025] random: systemd: uninitialized urandom read (16 bytes read) [ 7.581239] input: Dell Dell Multimedia Pro Keyboard Consumer Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.1/0003:413C:2011.0002/input/input2 [ 7.582654] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.583070] random: systemd: uninitialized urandom read (16 bytes read) [ 7.584504] systemd[1]: Created slice User and Session Slice. [ 7.585127] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.586436] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.587920] systemd[1]: Reached target User and Group Name Lookups. [ 7.594116] systemd[1]: Reached target Slices. [ 7.598463] systemd[1]: Reached target Swap. [ 7.604461] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.609944] systemd[1]: Listening on Syslog Socket. [ 7.615212] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.621446] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.628362] systemd[1]: Listening on Journal Audit Socket. [ 7.633253] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.638027] input: Dell Dell Multimedia Pro Keyboard System Control as /devices/platform/3610000.xhci/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.1/0003:413C:2011.0002/input/input3 [ 7.654405] hid-generic 0003:413C:2011.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell Multimedia Pro Keyboard] on usb-3610000.xhci-2.4.1/input1 [ 7.654885] systemd[1]: Listening on Journal Socket. [ 7.673416] systemd[1]: Listening on udev Control Socket. [ 7.678434] systemd[1]: Listening on udev Kernel Socket. [ 7.688318] systemd[1]: Mounting Huge Pages File System... [ 7.693875] systemd[1]: Mounting POSIX Message Queue File System... [ 7.699843] systemd[1]: Mounting RPC Pipe File System... [ 7.705398] systemd[1]: Mounting Kernel Debug File System... [ 7.711168] systemd[1]: Mounting Kernel Trace File System... [ 7.718180] systemd[1]: Starting Journal Service... [ 7.723475] systemd[1]: Starting Set the console keyboard layout... [ 7.728456] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 7.732694] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 7.744414] systemd[1]: Started Nameserver information manager. [ 7.747927] systemd[1]: Reached target Network (Pre). [ 7.749788] usb 1-2.4.2: new low-speed USB device number 6 using tegra-xusb [ 7.760237] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 7.767897] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 7.773923] systemd[1]: Starting Load Kernel Modules... [ 7.786172] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.792805] systemd[1]: Starting udev Coldplug all Devices... [ 7.801377] systemd[1]: Mounted Huge Pages File System. [ 7.802329] systemd[1]: Mounted POSIX Message Queue File System. [ 7.806283] systemd[1]: Mounted RPC Pipe File System. [ 7.810626] EXT4-fs (nvme0n1p1): re-mounted. Opts: (null) [ 7.818632] systemd[1]: Mounted Kernel Debug File System. [ 7.822285] systemd[1]: Mounted Kernel Trace File System. [ 7.830170] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 7.843199] systemd[1]: Finished Remount Root and Kernel File Systems. [ 7.844070] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 7.844070] [ 7.856339] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 7.857891] nvgpu: 17000000.gv11b nvgpu_read_support_gpu_tools:62 [INFO] Missing support-gpu-tools property, ret =-22 [ 7.865310] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 7.882185] usb 1-2.4.2: New USB device found, idVendor=17ef, idProduct=6016, bcdDevice= 0.00 [ 7.890121] systemd[1]: Starting Load/Save Random Seed... [ 7.893644] usb 1-2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.906756] usb 1-2.4.2: Product: ThinkPad USB Laser Mouse [ 7.906761] usb 1-2.4.2: Manufacturer: Lenovo [ 7.910894] input: Lenovo ThinkPad USB Laser Mouse as /devices/platform/3610000.xhci/usb1/1-2/1-2.4/1-2.4.2/1-2.4.2:1.0/0003:17EF:6016.0003/input/input4 [ 7.930803] hid-generic 0003:17EF:6016.0003: input,hidraw2: USB HID v1.11 Mouse [Lenovo ThinkPad USB Laser Mouse] on usb-3610000.xhci-2.4.2/input0 [ 7.935751] systemd[1]: Starting Create System Users... [ 7.952566] systemd[1]: Finished Load Kernel Modules. [ 7.955479] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 7.967238] systemd[1]: Mounting Kernel Configuration File System... [ 7.973292] systemd[1]: Started OP-TEE Client Supplicant. [ 7.978686] systemd[1]: Starting Apply Kernel Variables... [ 7.986978] systemd[1]: Finished Set the console keyboard layout. [ 7.990286] systemd[1]: Mounted Kernel Configuration File System. [ 8.000849] systemd[1]: Finished Create System Users. [ 9.089742] random: crng init done [ 9.089963] random: 7 urandom warning(s) missed due to ratelimiting [ 9.126423] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.131616] imx219 9-0010: board setup failed [ 9.131864] imx219: probe of 9-0010 failed with error -121 [ 9.142996] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.148367] imx219 10-0010: board setup failed [ 9.153920] imx219: probe of 10-0010 failed with error -121 [ 9.460055] using random self ethernet address [ 9.460200] using random host ethernet address [ 10.344528] using random self ethernet address [ 10.344687] using random host ethernet address [ 11.557784] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.558007] Creating 1 MTD partitions on "spi6.0": [ 11.558136] 0x000000000000-0x000002000000 : "Whole_flash0" [ 13.246987] Bridge firewalling registered Ubuntu 20.04.4 LTS ubuntu ttyTCU0 ubuntu login: [ 23.377991] nvidia: loading out-of-tree module taints kernel.