ROS_DISTRO was set to 'dashing' before. Please make sure that the environment does not mix paths from different distributions. goktug@goktug:~$ dmesg --follow [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5497-d3000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Mon Jul 26 12:19:28 PDT 2021 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44800000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a06aa000 [ 0.000000] Found lut_mem: 00002008@a06a4000 [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2031101 [ 0.000000] DMA zone: 7160 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 458237 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304 [ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999365 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0xa06aa000 lut_mem=0x2008@0xa06a4000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29968(91%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182412K/8124404K available (15358K kernel code, 2956K rwdata, 6692K rodata, 8640K init, 612K bss, 188328K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB) [ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB) [ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB) [ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000691] Console: colour dummy device 80x25 [ 0.000702] console [tty0] enabled [ 0.000709] bootconsole [tegra_comb_uart0] disabled [ 0.000724] kmemleak: Kernel memory leak detector disabled [ 0.000742] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000757] pid_max: default: 32768 minimum: 301 [ 0.001824] Security Framework initialized [ 0.002397] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002408] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.004066] ftrace: allocating 47077 entries in 184 pages [ 0.400748] sched-energy: Sched-energy-costs installed from DT [ 0.400768] ASID allocator initialised with 65536 entries [ 0.435697] tegra-id: chipid=21917. [ 0.435709] tegra-id: opt_subrevision=1. [ 0.435739] Tegra Revision: A02p SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.435752] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.435764] DTB Build time: Jul 26 2021 12:22:25 [ 0.483869] CPU1: Booted secondary processor [4e0f0040] [ 0.515953] CPU2: Booted secondary processor [4e0f0040] [ 0.548041] CPU3: Booted secondary processor [4e0f0040] [ 0.580324] CPU4: Booted secondary processor [4e0f0040] [ 0.612422] CPU5: Booted secondary processor [4e0f0040] [ 0.612645] Brought up 6 CPUs [ 0.612662] SMP: Total of 6 processors activated. [ 0.612675] CPU features: detected feature: Privileged Access Never [ 0.612684] CPU features: detected feature: LSE atomic instructions [ 0.612693] CPU features: detected feature: User Access Override [ 0.612702] CPU features: detected feature: 32-bit EL0 Support [ 0.614263] CPU: All CPU(s) started at EL2 [ 0.614316] alternatives: patching kernel code [ 0.620744] devtmpfs: initialized [ 0.662880] Initilizing CustomIPI irq domain [ 0.663136] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.663155] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.676344] pinctrl core: initialized pinctrl subsystem [ 0.676565] OS set in device tree is not L4T. [ 0.676814] regulator-dummy: no parameters [ 0.677052] Initializing plugin-manager [ 0.677117] Plugin module not found [ 0.677172] Plugin-manager status disabled [ 0.678556] NET: Registered protocol family 16 [ 0.679933] pstore: using zlib compression [ 0.679957] console [pstore-1] enabled [ 0.679966] pstore: Registered ramoops as persistent store backend [ 0.679976] ramoops: attached 0x200000@0xf0800000, ecc: 0/0 [ 0.699206] cpuidle: using governor menu [ 0.700252] bpmp: waiting for handshake [ 0.700263] bpmp: handshake completed [ 0.700280] bpmp: synchronizing channels [ 0.700292] bpmp: channels synchronized [ 0.700301] bpmp: mail init ok [ 0.702890] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.703078] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.703085] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.703093] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.703119] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.703125] t19x-arm-smmu 12000000.iommu: nested translation [ 0.703134] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.703143] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.703169] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.703207] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.703214] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.707321] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000) [ 0.707357] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.709810] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.711142] tegra_aon_clk_init: ok [ 0.711160] Registering BPMP clocks... [ 0.711296] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.711898] Serial: AMBA PL011 UART driver [ 0.712048] tegra_powergate_init: DONE [ 0.712067] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.712080] DTB Build time: Jul 26 2021 12:22:25 [ 0.715038] Tegra reboot handler registered. [ 0.722732] iommu: Adding device 14160000.pcie to group 0 [ 0.723421] iommu: Adding device 141a0000.pcie to group 1 [ 0.724679] iommu: Adding device 2490000.ether_qos to group 2 [ 0.725125] iommu: Adding device 3100000.serial to group 3 [ 0.725636] iommu: Adding device 3110000.serial to group 4 [ 0.726003] iommu: Adding device 3140000.serial to group 5 [ 0.726563] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.726814] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.726837] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.726845] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.726853] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.726902] tegra-pmc: PMC Prod config success [ 0.727097] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.727110] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.727451] iommu: Adding device 3400000.sdhci to group 6 [ 0.727955] iommu: Adding device 3210000.spi to group 7 [ 0.728360] iommu: Adding device 3230000.spi to group 8 [ 0.728787] iommu: Adding device 3270000.spi to group 9 [ 0.729920] iommu: Adding device 3160000.i2c to group 10 [ 0.730302] iommu: Adding device c240000.i2c to group 11 [ 0.730712] iommu: Adding device 3180000.i2c to group 12 [ 0.731095] iommu: Adding device 3190000.i2c to group 13 [ 0.731675] iommu: Adding device 31b0000.i2c to group 14 [ 0.732057] iommu: Adding device 31c0000.i2c to group 15 [ 0.732431] iommu: Adding device c250000.i2c to group 16 [ 0.732832] iommu: Adding device 31e0000.i2c to group 17 [ 0.733357] iommu: Adding device sound to group 18 [ 0.733850] iommu: Adding device 3510000.hda to group 19 [ 0.734395] iommu: Adding device bc00000.rtcpu to group 20 [ 0.736205] iommu: Adding device 13e10000.host1x to group 21 [ 0.736578] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.737032] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.737379] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.737743] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.738077] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.738465] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.738806] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.739159] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.739698] iommu: Adding device 15340000.vic to group 30 [ 0.740095] iommu: Adding device 15380000.nvjpg to group 31 [ 0.740389] iommu: Adding device 15500000.tsec to group 32 [ 0.740691] iommu: Adding device 15100000.tsecb to group 33 [ 0.740957] iommu: Adding device 15480000.nvdec to group 34 [ 0.741219] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.741520] iommu: Adding device 154c0000.nvenc to group 36 [ 0.741790] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.742173] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.742601] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.743186] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.743339] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06aa000(800000) [ 0.743349] platform 15200000.nvdisplay: IOVA linear map 0x00000000a06a4000(3000) [ 0.747276] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.747355] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.748106] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.748162] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.750189] iommu: Adding device 15c10000.vi to group 42 [ 0.750397] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.750804] iommu: Adding device 14800000.isp to group 43 [ 0.751832] iommu: Adding device 16000000.pva0 to group 44 [ 0.752359] iommu: Adding device 16800000.pva1 to group 45 [ 0.752740] iommu: Adding device 15810000.se to group 46 [ 0.753196] iommu: Adding device 15820000.se to group 47 [ 0.753570] iommu: Adding device 15830000.se to group 48 [ 0.753850] iommu: Adding device 15840000.se to group 49 [ 0.754142] iommu: Adding device c1a0000.aon to group 50 [ 0.755886] iommu: Adding device d000000.bpmp to group 51 [ 0.756212] bpmp: ping status is 0 [ 0.756392] bpmp d000000.bpmp: firmware tag is e73a758761f0c6d24a1e69a2ac6b5035 [ 0.759613] bpmp d000000.bpmp: probe ok [ 0.761677] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.762105] iommu: Adding device smmu_test to group 52 [ 0.763271] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c10000 [ 0.763290] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c20000 [ 0.763329] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c30000 [ 0.763356] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c40000 [ 0.763372] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2c50000 [ 0.763387] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b80000 [ 0.763407] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2b90000 [ 0.763423] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2ba0000 [ 0.763438] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x2bb0000 [ 0.763454] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1700000 [ 0.763470] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1710000 [ 0.763485] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1720000 [ 0.763501] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1730000 [ 0.763523] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1740000 [ 0.763539] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1750000 [ 0.763555] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1760000 [ 0.763571] mc: mapped MMIO address: 0xffffff800b1b0000 -> 0x1770000 [ 0.763644] mc-err: mcerr ops are set to t19x [ 0.769415] iommu: Adding device 2600000.dma to group 53 [ 0.774746] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.775929] GPIO line 339 (wifi-enable) hogged as output/high [ 0.775970] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.776007] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.776311] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.784162] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.784236] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.784274] GPIO line 266 (w-disable1) hogged as output/high [ 0.784309] GPIO line 264 (w-disable2) hogged as output/high [ 0.784342] GPIO line 265 (suspend-led-gpio) hogged as output/high [ 0.784663] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.787400] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a [ 0.787412] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.787421] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.788434] iommu: Adding device 3550000.xudc to group 54 [ 0.789228] iommu: Adding device 3610000.xhci to group 55 [ 0.791723] arm64_ras arm64_ras: probed [ 0.792210] ras_fhi_enable: FHI 469 enabled on CPU0 [ 0.792260] ras_fhi_enable: FHI 470 enabled on CPU1 [ 0.792340] ras_fhi_enable: FHI 471 enabled on CPU2 [ 0.792445] ras_fhi_enable: FHI 472 enabled on CPU3 [ 0.792532] ras_fhi_enable: FHI 473 enabled on CPU4 [ 0.792598] ras_fhi_enable: FHI 474 enabled on CPU5 [ 0.792795] carmel_ras_enable: RAS enabled on cpu0 [ 0.792989] carmel_ras_enable: RAS enabled on cpu1 [ 0.793159] carmel_ras_enable: RAS enabled on cpu2 [ 0.793337] carmel_ras_enable: RAS enabled on cpu3 [ 0.793558] carmel_ras_enable: RAS enabled on cpu4 [ 0.793745] carmel_ras_enable: RAS enabled on cpu5 [ 0.793805] carmel_ras carmel_ras: probed [ 0.795147] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 478, noc_nonsecure_irq = 477> [ 0.795822] tegra-cbb c600000.aon-noc: noc_secure_irq = 480, noc_nonsecure_irq = 479> [ 0.796799] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 482, noc_nonsecure_irq = 481> [ 0.797822] tegra-cbb be00000.rce-noc: noc_secure_irq = 484, noc_nonsecure_irq = 483> [ 0.798748] tegra-cbb b600000.sce-noc: noc_secure_irq = 486, noc_nonsecure_irq = 485> [ 0.799262] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.800777] vdd-ac-bat: 5000 mV [ 0.801237] vdd-sdmmc1-sw: 3300 mV [ 0.801596] vdd-1v8-sd: 1800 mV [ 0.801906] vdd-3v3-cvb: 3300 mV [ 0.802202] vdd-1v8-cvb: 1800 mV [ 0.802612] vdd-epb-1v0: 1000 mV [ 0.802827] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.803154] avdd-cam-2v8: 2800 mV [ 0.803488] vdd-fan: 5000 mV [ 0.803861] vdd-hdmi-5v0: 5000 mV [ 0.804221] vdd_sys_en: 1200 mV [ 0.840380] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.845079] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.845417] SCSI subsystem initialized [ 0.845684] libata version 3.00 loaded. [ 0.846334] usbcore: registered new interface driver usbfs [ 0.846451] usbcore: registered new interface driver hub [ 0.846582] usbcore: registered new device driver usb [ 0.858108] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.861027] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.868574] vdd-1v0: at 1000 mV [ 0.872588] vdd-1v8-hs: at 1800 mV [ 0.876609] vdd-1v8-ls: at 1800 mV [ 0.880628] vdd-1v8-ao: at 1800 mV [ 0.884623] vddio-ddr-1v1: at 1100 mV [ 0.888406] vdd-rtc: at 800 mV [ 0.889683] spmic-ldo1: at 2375 mV [ 0.896442] vdd-ao-3v3: at 3300 mV [ 0.904482] vddio-emmc-3v3: at 3300 mV [ 0.905951] spmic-ldo4: at 1587 mV [ 0.912534] vdd-usb-3v3: at 3300 mV [ 0.920558] vddio-sdmmc1-3v3: at 3300 mV [ 0.924572] vdd-csi-1v2: at 1200 mV [ 0.926083] spmic-ldo8: at 1800 mV [ 0.930946] GPIO line 246 (gpio_default) hogged as output/high [ 0.932393] GPIO line 247 (gpio_default) hogged as output/high [ 0.932757] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.933080] max77620 4-003c: max77620 probe successful [ 0.933894] media: Linux media interface: v0.10 [ 0.934027] Linux video capture interface: v2.00 [ 0.935996] pps_core: LinuxPPS API ver. 1 registered [ 0.936003] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.936022] PTP clock support registered [ 0.936336] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.936641] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.936684] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.939397] trusty trusty: trusty version: Built: 12:20:34 Jul 26 2021 [ 0.939463] trusty trusty: selected api version: 3 (requested 3) [ 0.940822] Advanced Linux Sound Architecture Driver Initialized. [ 0.941311] Bluetooth: Core ver 2.22 [ 0.941352] NET: Registered protocol family 31 [ 0.941358] Bluetooth: HCI device and connection manager initialized [ 0.941369] Bluetooth: HCI socket layer initialized [ 0.941378] Bluetooth: L2CAP socket layer initialized [ 0.941402] Bluetooth: SCO socket layer initialized [ 0.944510] camchar: rtcpu character device driver loaded [ 0.945122] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.945220] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.946349] clocksource: Switched to clocksource arch_sys_counter [ 0.990467] VFS: Disk quotas dquot_6.6.0 [ 0.990563] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.990974] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.993148] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 0.993195] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 0.993532] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 0.993540] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.993555] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 0.993563] nvmap_page_pool_init: Total RAM pages: 1984019 [ 0.993569] nvmap_page_pool_init: nvmap page pool size: 248002 pages (968 MB) [ 0.994004] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.994272] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 0.996240] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.009775] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.010034] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.010294] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.010550] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.010765] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.011924] la/ptsa driver initialized. [ 1.012251] NET: Registered protocol family 2 [ 1.013113] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.013473] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.014069] TCP: Hash tables configured (established 65536 bind 65536) [ 1.014114] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.014233] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.014727] NET: Registered protocol family 1 [ 1.015224] RPC: Registered named UNIX socket transport module. [ 1.015230] RPC: Registered udp transport module. [ 1.015235] RPC: Registered tcp transport module. [ 1.015240] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.015260] PCI: CLS 0 bytes, default 64 [ 1.015503] Trying to unpack rootfs image as initramfs... [ 1.242643] Freeing initrd memory: 7068K [ 1.262214] random: fast init done [ 1.266511] host1x 13e10000.host1x: initialized [ 1.268397] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.273679] audit: initializing netlink subsys (disabled) [ 1.273720] audit: type=2000 audit(0.892:1): initialized [ 1.274552] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.285922] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.287259] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.287966] 9p: Installing v9fs 9p2000 file system support [ 1.293096] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.293277] io scheduler noop registered [ 1.293530] io scheduler cfq registered (default) [ 1.297758] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.333495] iommu: Adding device 2993000.adsp to group 56 [ 1.439054] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.440069] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.453914] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.454472] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.455093] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.455556] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.455977] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.459880] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.460121] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.463227] tsec 15500000.tsec: initialized [ 1.464799] tsec 15100000.tsecb: initialized [ 1.468729] nvdec 15480000.nvdec: initialized [ 1.471412] nvdec 15140000.nvdec1: initialized [ 1.477628] falcon 15340000.vic: initialized [ 1.479828] falcon 15380000.nvjpg: initialized [ 1.481866] falcon 154c0000.nvenc: initialized [ 1.484055] falcon 15a80000.nvenc1: initialized [ 1.487481] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.489306] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.491244] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.492943] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.494737] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.496389] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.497996] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.499782] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.503626] t194-nvcsi 15a00000.nvcsi: initialized [ 1.509144] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.509593] scare-pigeon 14b00000.isp-thi: initialized [ 1.515400] pva 16000000.pva0: initialized [ 1.520852] pva 16800000.pva1: initialized [ 1.525551] nvdla 15880000.nvdla0: initialized [ 1.530232] nvdla 158c0000.nvdla1: initialized [ 1.531660] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.531674] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.531708] tegradccommon 15200000.dc_common: dma mapping done [ 1.532605] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.532639] generic_infoframe_type: 0x87 [ 1.532720] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.532751] tegradc 15200000.nvdisplay: Display dc.ffffff800bd50000 registered with id=0 [ 1.536114] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 1.536122] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 1.536127] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.536309] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.536319] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.536979] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.539140] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.539150] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.542416] tegradc 15200000.nvdisplay: probed [ 1.578301] Console: switching to colour frame buffer device 240x67 [ 1.578491] tegradc 15200000.nvdisplay: fb registered [ 1.578862] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.579375] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.579482] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.584302] Parent Clock set for DC plld2 [ 1.636095] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.636742] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.636756] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.662296] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.662303] Extcon AUX1(HDMI) enable [ 1.662826] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.662861] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.662961] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.663013] tegradc 15210000.nvdisplay: Display dc.ffffff800be50000 registered with id=1 [ 1.663219] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.663228] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.671740] tegradc 15210000.nvdisplay: probed [ 1.672062] tegradc 15210000.nvdisplay: fb registered [ 1.675467] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.675476] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.675490] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.675502] tegradc 15210000.nvdisplay: blank - powerdown [ 1.675517] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.675522] Extcon DP: HPD disabled [ 1.675527] hpd: hpd_switch 0 [ 1.675532] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.675546] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.675557] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.675798] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.675808] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.676079] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.676240] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.676393] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.676400] tegra_cec 3960000.tegra_cec: probed [ 1.687588] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.688417] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.688426] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.688820] kfuse 3830000.kfuse: initialized [ 1.695408] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.698620] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.699845] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.700593] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.701876] console [ttyTCU0] enabled [ 1.702458] [drm] Initialized [ 1.714296] brd: module loaded [ 1.720034] loop: module loaded [ 1.720100] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.720252] tegra_profiler: auth: init [ 1.720861] THERMAL EST: found 3 subdevs [ 1.720867] THERMAL EST num_resources: 0 [ 1.720874] [THERMAL EST subdev 0] [ 1.720880] [THERMAL EST subdev 1] [ 1.720886] [THERMAL EST subdev 2] [ 1.720896] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.721245] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.721251] THERMAL EST: thz register success. [ 1.721414] THERMAL EST: end of probe, return err: 0 [ 1.722212] sd: No Scsi addr parsed to reserve index [ 1.722249] hisi_sas: driver version v1.6 [ 1.732575] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.732585] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.732596] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.732866] 1 ofpart partitions found on MTD device spi6.0 [ 1.732873] Creating 1 MTD partitions on "spi6.0": [ 1.732893] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.735451] libphy: Fixed MDIO Bus: probed [ 1.737199] tun: Universal TUN/TAP device driver, 1.6 [ 1.737206] tun: (C) 1999-2004 Max Krasnyansky [ 1.738002] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.738008] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.738080] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.738085] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.738134] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.738139] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.738192] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.738197] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.801502] tegradc 15200000.nvdisplay: blank - powerdown [ 1.836420] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.836424] Extcon AUX1(HDMI) disable [ 1.862066] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.863271] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.882762] tegradc 15200000.nvdisplay: unblank [ 1.884580] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.884958] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.895756] Parent Clock set for DC plld2 [ 1.900437] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 1.901791] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.936406] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.936410] Extcon AUX1(HDMI) enable [ 1.951919] tegradc 15200000.nvdisplay: sync windows ret = 246 [ 1.977414] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 1.977420] Extcon HDMI: HPD enabled [ 1.977463] tegradc 15200000.nvdisplay: hdmi: plugged [ 1.981409] eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg [ 1.981942] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3d 8a a9 [ 1.981963] Using phyrst_lpmode = 1 from DT [ 1.982079] libphy: dwc_phy: probed [ 1.984771] PPP generic driver version 2.4.2 [ 1.985195] PPP BSD Compression module registered [ 1.985202] PPP Deflate Compression module registered [ 1.985221] PPP MPPE Compression module registered [ 1.985227] NET: Registered protocol family 24 [ 1.985289] usbcore: registered new interface driver r8152 [ 1.985337] usbcore: registered new interface driver asix [ 1.985377] usbcore: registered new interface driver ax88179_178a [ 1.985409] usbcore: registered new interface driver cdc_ether [ 1.985442] usbcore: registered new interface driver net1080 [ 1.985473] usbcore: registered new interface driver cdc_subset [ 1.985534] usbcore: registered new interface driver zaurus [ 1.985587] usbcore: registered new interface driver cdc_ncm [ 1.985797] VFIO - User Level meta-driver version: 0.3 [ 1.987274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.987297] ehci-pci: EHCI PCI platform driver [ 1.987339] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.987349] ohci-pci: OHCI PCI platform driver [ 1.987394] ohci-platform: OHCI generic platform driver [ 1.992192] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.994328] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4d27000 id [ 1.995225] usbcore: registered new interface driver uas [ 1.995310] usbcore: registered new interface driver usb-storage [ 1.995389] usbcore: registered new interface driver usbserial [ 1.996754] tegra-xusb 3610000.xhci: Firmware timestamp: 2020-09-11 16:55:03 UTC, Version: 60.09 release [ 1.996789] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.996811] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.997534] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.997603] tegra-xusb 3610000.xhci: irq 464, io mem 0x03610000 [ 1.997835] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.997842] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.997848] usb usb1: Product: xHCI Host Controller [ 1.997855] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.997860] usb usb1: SerialNumber: 3610000.xhci [ 1.998477] hub 1-0:1.0: USB hub found [ 1.998537] hub 1-0:1.0: 4 ports detected [ 1.999117] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.999129] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.999139] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.999466] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.999472] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.999478] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.999486] usb usb2: Product: xHCI Host Controller [ 1.999493] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd [ 1.999498] usb usb2: SerialNumber: 3610000.xhci [ 1.999556] tegra-xudc-new 3550000.xudc: device count: 1 [ 2.000012] hub 2-0:1.0: USB hub found [ 2.000057] hub 2-0:1.0: 4 ports detected [ 2.000463] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 2.000474] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 2.000862] tegra-xudc-new 3550000.xudc: entering ELPG [ 2.001233] tegra-xudc-new 3550000.xudc: entering ELPG done [ 2.001237] Wake76 for irq=199 [ 2.001243] Wake77 for irq=199 [ 2.001249] Wake78 for irq=199 [ 2.001253] Wake79 for irq=199 [ 2.001257] Wake80 for irq=199 [ 2.001261] Wake81 for irq=199 [ 2.001265] Wake82 for irq=199 [ 2.001329] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 2.001333] mousedev: PS/2 mouse device common for all mice [ 2.001343] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 2.001475] usbcore: registered new interface driver xpad [ 2.102926] usb usb2: usb_suspend_both: status 0 [ 2.133563] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 2.135683] Wake73 for irq=42 [ 2.137003] rtc rtc1: alarm rtc device [ 2.137048] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 2.137074] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.137252] i2c /dev entries driver [ 2.139752] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.140218] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.140228] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 2.140794] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.164253] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.164309] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.164648] imx219 9-0010: board setup failed [ 2.164870] imx219: probe of 9-0010 failed with error -121 [ 2.165270] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.188510] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.188559] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.188880] imx219 10-0010: board setup failed [ 2.189078] imx219: probe of 10-0010 failed with error -121 [ 2.190428] max77620-power max20024-power: Event recorder REG_NVERC : 0x44 [ 2.197709] tegra-thermal-throttle bthrot_cdev: cpufreq policy is not ready defer [ 2.198147] FAN dev name: pwm-fan [ 2.198191] FAN:gpio request success. [ 2.198200] FAN: can't find tach_gpio [ 2.198212] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.198237] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.198510] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.198517] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.199397] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.199407] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.199414] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.199420] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.199426] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.199432] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.199438] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.199444] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.199451] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.199458] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.200437] tegra-oc-event d280000.soctherm-oc-event: OC driver initialized [ 2.201699] device-mapper: uevent: version 1.0.3 [ 2.202447] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.206437] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.207646] cpuidle: Initializing cpuidle driver [ 2.208701] sdhci: Secure Digital Host Controller Interface driver [ 2.208705] sdhci: Copyright(c) Pierre Ossman [ 2.208709] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.209064] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 2.209893] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 2.211774] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 246 [ 2.216355] tegra-se-nvhost 15810000.se: initialized [ 2.217358] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.218037] tegra-se-nvhost 15820000.se: initialized [ 2.219230] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.219820] tegra-se-nvhost 15830000.se: initialized [ 2.220459] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.221028] tegra-se-nvhost 15840000.se: initialized [ 2.222077] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.223266] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.223412] hidraw: raw HID events driver (C) Jiri Kosina [ 2.224874] usbcore: registered new interface driver usbhid [ 2.224879] usbhid: USB HID core driver [ 2.229027] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.230175] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.230750] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.231700] denver_knobs_init:MTS_VERSION:53250041 [ 2.232089] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.232873] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.233303] t19x_cache tegra-cache: probed [ 2.235726] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.235734] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.236325] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.236813] PLL_AON clock registered [ 2.238642] Clocks initialized successfully [ 2.240487] nvpmodel: initialized successfully [ 2.241790] trusty-virtio trusty:virtio: initializing [ 2.241992] trusty_ipc virtio0: vring0: va(pa) ffffffc1e26b8000(0) qsz 32 notifyid 1 [ 2.242005] trusty_ipc virtio0: vring1: va(pa) ffffffc1e26ba000(0) qsz 32 notifyid 2 [ 2.242131] trusty-virtio trusty:virtio: initializing done [ 2.242450] trusty_ipc virtio0: is online [ 2.242849] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.243317] usbcore: registered new interface driver snd-usb-audio [ 2.262471] gpio tegra-gpio wake8 for gpio=55(G:7) [ 2.262560] mmc0: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.263169] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.263418] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.263629] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.263831] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.330376] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.355983] OPE platform probe [ 2.356119] OPE platform probe successful [ 2.372246] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489 [ 2.372253] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.372258] usb 1-2: Product: 4-Port USB 2.0 Hub [ 2.372262] usb 1-2: Manufacturer: Generic [ 2.373596] hub 1-2:1.0: USB hub found [ 2.374634] hub 1-2:1.0: 4 ports detected [ 2.435836] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.435973] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.436099] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.436249] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.436389] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.436536] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.436660] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.436779] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.436921] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.437042] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.437182] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.437303] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.437412] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.437523] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.437620] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.437717] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.437811] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.437904] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.437996] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.438112] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.468224] u32 classifier [ 2.468229] Actions configured [ 2.468301] Initializing XFRM netlink socket [ 2.469001] NET: Registered protocol family 10 [ 2.469755] NET: Registered protocol family 17 [ 2.469767] NET: Registered protocol family 15 [ 2.469829] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.469935] Bluetooth: RFCOMM socket layer initialized [ 2.469952] Bluetooth: RFCOMM ver 1.11 [ 2.469958] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.469965] Bluetooth: HIDP socket layer initialized [ 2.469994] 9pnet: Installing 9P2000 support [ 2.470060] Key type dns_resolver registered [ 2.470313] Registered cp15_barrier emulation handler [ 2.470357] Registered setend emulation handler [ 2.471982] registered taskstats version 1 [ 2.472469] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.473822] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.473842] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.473851] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.473857] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.479465] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.483237] usb 2-3: new SuperSpeedPlus USB device number 2 using tegra-xusb [ 2.524060] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489 [ 2.524069] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.524073] usb 2-3: Product: 4-Port USB 3.0 Hub [ 2.524081] usb 2-3: Manufacturer: Generic [ 2.541857] hub 2-3:1.0: USB hub found [ 2.544033] hub 2-3:1.0: 4 ports detected [ 2.587064] tegra-pcie-dw 14160000.pcie: link is up [ 2.587238] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.587246] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.587254] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.587260] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.587266] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.587311] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.587481] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.587720] iommu: Adding device 0004:00:00.0 to group 58 [ 2.588052] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 2.588168] pci 0004:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.588172] pci 0004:01:00.0: reg 0x10: [io size 0x0100] [ 2.588332] pci 0004:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 2.589064] pci 0004:01:00.0: supports D1 D2 [ 2.589068] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.589418] iommu: Adding device 0004:01:00.0 to group 59 [ 2.604286] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 2.604292] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.604319] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 2.604401] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.604428] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.604434] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.604441] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 2.604461] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 2.604521] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 2.604760] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.604765] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 2.604771] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.604865] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.606294] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.606542] tegra-pcie-dw 141a0000.pcie: Failed to get 3V slot regulator: -19 [ 2.606556] tegra-pcie-dw 141a0000.pcie: Failed to get 12V slot regulator: -19 [ 2.624300] mmc0: hw tuning done ... [ 2.624338] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 2.624781] mmcblk0: mmc0:aaaa SN128 119 GiB [ 2.629867] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.678384] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 2.714841] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.714865] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.714874] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.714880] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.742920] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.742927] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.750371] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 2.771452] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549 [ 2.771459] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.771464] usb 1-3: Product: Bluetooth Radio [ 2.771468] usb 1-3: Manufacturer: Realtek [ 2.771472] usb 1-3: SerialNumber: 00e04c000001 [ 2.839068] FAN rising trip_level:1 cur_temp:48000 trip_temps[2]:60000 [ 3.086364] usb 1-2.1: new full-speed USB device number 4 using tegra-xusb [ 3.108556] usb 1-2.1: New USB device found, idVendor=062a, idProduct=4101 [ 3.108564] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.108569] usb 1-2.1: Product: 2.4G Keyboard Mouse [ 3.108574] usb 1-2.1: Manufacturer: MOSART Semi. [ 3.110623] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.0/0003:062A:4101.0001/input/input4 [ 3.122381] usb 2-3: usb_suspend_both: status 0 [ 3.122560] usb usb2: usb_suspend_both: status 0 [ 3.170783] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-3610000.xhci-2.1/input0 [ 3.173027] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/3610000.xhci/usb1/1-2/1-2.1/1-2.1:1.1/0003:062A:4101.0002/input/input5 [ 3.229941] tegra-pcie-dw 141a0000.pcie: link is down [ 3.230073] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 3.230081] pci_bus 0005:00: root bus resource [bus 00-ff] [ 3.230088] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 3.230095] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 3.230100] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 3.230127] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 3.230263] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 3.230602] iommu: Adding device 0005:00:00.0 to group 60 [ 3.230671] hid-generic 0003:062A:4101.0002: input,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-3610000.xhci-2.1/input1 [ 3.230856] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 3.230878] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 3.231114] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 3.231121] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 3.231211] aer 0005:00:00.0:pcie002: service driver aer loaded [ 3.231339] pcie_pme 0005:00:00.0:pcie001: unloading service driver pcie_pme [ 3.231390] aer 0005:00:00.0:pcie002: unloading service driver aer [ 3.231470] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 3.231536] iommu: Removing device 0005:00:00.0 from group 60 [ 3.231561] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 3.233236] tegra-pcie-dw 141a0000.pcie: PCIe link is not up...! [ 3.244029] tegra-cbb 14040000.cv-noc: noc_secure_irq = 90, noc_nonsecure_irq = 89> [ 3.251746] tegra194-isp5 14800000.isp: initialized [ 3.259032] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 3.265356] tegra194-vi5 15c10000.vi: initialized [ 3.270302] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 3.270430] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 3.270718] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 3.275302] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 3.275321] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 3.275327] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 3.275407] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 3.275445] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 3.275450] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 3.279508] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 3.279572] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 3.279579] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 3.279869] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 3.279903] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 3.279908] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 3.280299] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 3.280350] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 3.280354] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 3.280584] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 3.281415] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 3.360669] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 3.360969] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.361206] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 3.361396] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 3.361838] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 3.361911] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 3.362114] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 3.362118] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.363167] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=06bdc710c3c9a48de2881774602bbcf4d0114a58 [ 3.363661] Wake83 for irq=211 [ 3.363735] gpio tegra-gpio wake67 for gpio=48(G:0) [ 3.363811] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 3.363960] input: gpio-keys as /devices/gpio-keys/input/input6 [ 3.395408] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:05:58 UTC (946688758) [ 3.395994] mmcblk mmc0:aaaa: Card claimed for testing. [ 3.433737] bpmp: mounted debugfs mirror [ 3.439641] ALSA device list: [ 3.439647] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 3.439651] #1: jetson-xaviernx-ape [ 3.441535] Freeing unused kernel memory: 8640K [ 3.481264] Root device found: mmcblk0p1 [ 3.483214] Found dev node: /dev/mmcblk0p1 [ 3.703361] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted [ 3.703367] EXT4-fs (mmcblk0p1): recovery complete [ 3.727028] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.730047] Rootfs mounted over mmcblk0p1 [ 3.758616] Switching from initrd to actual rootfs [ 3.970882] systemd[1]: System time before build time, advancing clock. [ 4.006299] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.011315] cgroup: cgroup2: unknown option "nsdelegate" [ 4.033510] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.034170] systemd[1]: Detected architecture arm64. [ 4.045731] systemd[1]: Set hostname to . [ 4.193969] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.193983] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.434206] random: systemd: uninitialized urandom read (16 bytes read) [ 4.434667] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.434801] random: systemd: uninitialized urandom read (16 bytes read) [ 4.437608] systemd[1]: Created slice User and Session Slice. [ 4.437655] random: systemd: uninitialized urandom read (16 bytes read) [ 4.437678] systemd[1]: Reached target Swap. [ 4.437828] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.439094] systemd[1]: Created slice System Slice. [ 4.509001] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.652784] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 4.889195] systemd-journald[2364]: Received request to flush runtime journal from PID 1 [ 5.873485] cpu-throttle-alert cooling device registered. [ 5.874619] gpu-throttle-alert cooling device registered. [ 5.876230] aux-throttle-alert cooling device registered. [ 5.951893] random: crng init done [ 5.952032] random: 7 urandom warning(s) missed due to ratelimiting [ 6.235908] usbcore: registered new interface driver btusb [ 6.258008] rtk_btusb: Realtek Bluetooth USB driver ver 3.1 [ 6.258016] rtk_btcoex: rtk_btcoex_init: version: 1.2 [ 6.258019] rtk_btcoex: create workqueue [ 6.258179] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2 [ 6.258243] rtk_btusb: btusb_probe intf->cur_altsetting->desc.bInterfaceNumber 0 [ 6.258248] rtk_btusb: btusb_probe can_wakeup 1, may wakeup 0 [ 6.258251] rtk_btusb: patch_add [ 6.258255] rtk_btusb: auto suspend is disabled [ 6.258259] rtk_btusb: pid = 0x3549 [ 6.258263] rtk_btusb: patch_add: Reset gEVersion to 0xff [ 6.258273] rtk_btusb: set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); [ 6.259095] rtk_btusb: btusb_probe: done [ 6.259111] rtk_btusb: btusb_open start [ 6.259117] rtk_btusb: btusb_open hdev->promisc ==0 [ 6.259120] rtk_btusb: download_patch start [ 6.259125] rtk_btusb: chip type value: 0x73 [ 6.259130] rtk_btusb: HCI reset. [ 6.259195] usbcore: registered new interface driver rtk_btusb [ 6.270174] rtk_btusb: read_ver_rsp->lmp_subver = 0x8822 [ 6.270181] rtk_btusb: read_ver_rsp->hci_rev = 0xc [ 6.270184] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 6.270188] rtk_btusb: load_firmware start [ 6.270191] rtk_btusb: lmp_version = 0x8822 [ 6.270196] rtk_btusb: config filename rtl8822cu_config [ 6.318081] rtk_btusb: no bdaddr file /opt/bdaddr [ 6.318090] rtk_btusb: 55 ab 23 87 00 00 [ 6.318102] rtk_btusb: Config file length 6, new length 6 [ 6.318106] rtk_btusb: fw name is rtl8822cu_fw [ 6.320242] rtk_btusb: This is not 8723a, use new patch style! [ 6.320252] rtk_btusb: rtk_get_eversion: gEVersion 255 [ 6.321191] rtk_btusb: eversion->status = 0x0, eversion->version = 0x3 [ 6.321201] rtk_btusb: load_firmware: New gEVersion 3 [ 6.321206] rtk_btusb: rtk_get_fw_project_id: opcode 0, len 1, data 13 [ 6.321211] rtk_btusb: lmp_version is 8822, project_id is 8822, match! [ 6.321215] rtk_btusb: fw_version = 0x98a42f7 [ 6.321218] rtk_btusb: number_of_total_patch = 3 [ 6.321221] rtk_btusb: chipID 4 [ 6.321224] rtk_btusb: patch_length 0x55f0 [ 6.321227] rtk_btusb: start_offset 0x00005d00 [ 6.321231] rtk_btusb: Svn version: 21761 [ 6.321234] rtk_btusb: Coexistence: BTCOEX_20190509-0d0d [ 6.321238] rtk_btusb: buf_len = 0x55f6 [ 6.321250] rtk_btusb: fw: exists, config file: exists [ 6.321253] rtk_btusb: load_firmware done [ 6.321271] rtk_btusb: download_data start [ 6.435244] rtk_btusb: download_data done [ 6.435263] rtk_btusb: HCI reset. [ 6.446188] rtk_btusb: read_ver_rsp->lmp_subver = 0x42f7 [ 6.446194] rtk_btusb: read_ver_rsp->hci_rev = 0x98a [ 6.446198] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 6.446210] rtk_btusb: Rtk patch end 0 [ 6.446215] rtk_btusb: btusb_open set HCI_RUNNING [ 6.446236] rtk_btcoex: Open BTCOEX [ 6.446240] rtk_btusb: btusb_open end [ 6.448196] rtk_btcoex: BTCOEX hci_rev 0x098a [ 6.448201] rtk_btcoex: BTCOEX lmp_subver 0x42f7 [ 6.468192] rtk_btusb: btusb_notify: hci0 evt 3 [ 6.806762] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.806777] Bluetooth: BNEP socket layer initialized [ 6.931723] rtl88x2ce 0004:01:00.0: enabling device (0000 -> 0003) [ 6.942790] rtk_btusb: btusb_flush add delay [ 6.963260] rtk_btusb: btusb_close [ 6.975990] rtk_btcoex: Close BTCOEX [ 6.976003] rtk_btcoex: -x [ 7.086281] using random self ethernet address [ 7.086521] using random host ethernet address [ 7.885341] Mass Storage Function, version: 2009/09/11 [ 7.885350] LUN: removable file: (no medium) [ 7.890689] using random self ethernet address [ 7.890880] using random host ethernet address [ 7.936785] rndis0: HOST MAC 1a:bf:12:1a:4c:2c [ 7.937062] rndis0: MAC 1a:bf:12:1a:4c:2d [ 7.937668] usb0: HOST MAC 1a:bf:12:1a:4c:2e [ 7.937702] usb0: MAC 1a:bf:12:1a:4c:2f [ 7.937722] tegra-xudc-new 3550000.xudc: exiting ELPG [ 7.938421] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 7.938443] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 7.938490] tegra-xudc-new 3550000.xudc: entering ELPG [ 7.938693] tegra-xudc-new 3550000.xudc: entering ELPG done [ 7.938705] tegra-xudc-new 3550000.xudc: exiting ELPG [ 7.939108] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 7.939119] tegra-xudc-new 3550000.xudc: entering ELPG [ 7.939294] tegra-xudc-new 3550000.xudc: entering ELPG done [ 7.945611] l4tbr0: port 1(rndis0) entered blocking state [ 7.945622] l4tbr0: port 1(rndis0) entered disabled state [ 7.945827] device rndis0 entered promiscuous mode [ 7.952451] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 7.957887] l4tbr0: port 2(usb0) entered blocking state [ 7.957895] l4tbr0: port 2(usb0) entered disabled state [ 7.958237] device usb0 entered promiscuous mode [ 7.965867] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 8.026698] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.218615] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 8.343305] gpio tegra-gpio wake20 for gpio=52(G:4) [ 8.355503] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.377632] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.443709] zram: Added device: zram0 [ 8.444992] zram: Added device: zram1 [ 8.446126] zram: Added device: zram2 [ 8.446813] zram: Added device: zram3 [ 8.447311] zram: Added device: zram4 [ 8.447765] zram: Added device: zram5 [ 8.467664] zram0: detected capacity change from 0 to 678551552 [ 8.654969] Adding 662644k swap on /dev/zram0. Priority:5 extents:1 across:662644k SS [ 8.668345] zram1: detected capacity change from 0 to 678551552 [ 8.675700] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.684791] Adding 662644k swap on /dev/zram1. Priority:5 extents:1 across:662644k SS [ 8.688020] zram2: detected capacity change from 0 to 678551552 [ 8.701703] Adding 662644k swap on /dev/zram2. Priority:5 extents:1 across:662644k SS [ 8.705519] zram3: detected capacity change from 0 to 678551552 [ 8.719767] Adding 662644k swap on /dev/zram3. Priority:5 extents:1 across:662644k SS [ 8.722863] zram4: detected capacity change from 0 to 678551552 [ 8.735376] Adding 662644k swap on /dev/zram4. Priority:5 extents:1 across:662644k SS [ 8.737741] zram5: detected capacity change from 0 to 678551552 [ 8.750603] Adding 662644k swap on /dev/zram5. Priority:5 extents:1 across:662644k SS [ 9.060916] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.917181] Bridge firewalling registered [ 9.944322] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 10.328391] Netfilter messages via NETLINK v0.30. [ 10.331992] ctnetlink v0.93: registering with nfnetlink. [ 10.500617] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 11.188841] tegradc 15200000.nvdisplay: unblank [ 11.188868] tegradc 15210000.nvdisplay: blank - powerdown [ 13.228981] ------------[ cut here ]------------ [ 13.229237] WARNING: CPU: 4 PID: 5945 at /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/net/wireless/nl80211.c:14153 cfg80211_ch_switch_notify+0x150/0x170 [cfg80211] [ 13.229491] Modules linked in: xt_conntrack ipt_MASQUERADE nf_nat_masquerade_ipv4 nf_conntrack_netlink nfnetlink xt_addrtype iptable_filter iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack br_netfilter zram overlay rtl8822ce bnep rtk_btusb btusb btrtl btbcm btintel userspace_alert cfg80211 binfmt_misc nvgpu ip_tables x_tables [ 13.229612] CPU: 4 PID: 5945 Comm: RTW_CMD_THREAD Not tainted 4.9.253-tegra #1 [ 13.229617] Hardware name: NVIDIA Jetson Xavier NX Developer Kit (DT) [ 13.229630] task: ffffffc1dd5f4600 task.stack: ffffffc1c6b28000 [ 13.229749] PC is at cfg80211_ch_switch_notify+0x150/0x170 [cfg80211] [ 13.230676] LR is at rtw_cfg80211_ch_switch_notify+0x94/0x98 [rtl8822ce] [ 13.230685] pc : [] lr : [] pstate: 60c00045 [ 13.230689] sp : ffffffc1c6b2bc20 [ 13.230694] x29: ffffffc1c6b2bc20 x28: ffffff8001307760 [ 13.230705] x27: ffffff800d1461bc x26: ffffff80014cc578 [ 13.230716] x25: ffffff800155013c x24: ffffffc1f4c94000 [ 13.230727] x23: ffffffc1ce08d000 x22: ffffffc1ce091000 [ 13.230737] x21: 0000000000000001 x20: ffffffc1c6b2bca8 [ 13.230747] x19: ffffffc1dc612c00 x18: 0000000000000030 [ 13.230757] x17: 0000007facdf98d0 x16: 0000000000004d96 [ 13.230767] x15: ffffffffffffffff x14: 0000000000000008 [ 13.230777] x13: 7f1101c7fffc0000 x12: 0005c00363fffa03 [ 13.230787] x11: 0000000000000004 x10: 0000000000000002 [ 13.230797] x9 : 0000000000000004 x8 : ffffffc1c6b2bd3a [ 13.230808] x7 : 0000000000000000 x6 : 0000000000000001 [ 13.230819] x5 : 0000000000000040 x4 : 00000000000009b4 [ 13.230829] x3 : 0000144600000002 x2 : ffffffc1ce092848 [ 13.230840] x1 : 0000144600000002 x0 : 0000000000000000 [ 13.230855] ---[ end trace 0df6c9d216e8e267 ]--- [ 13.230976] Call trace: [ 13.231095] [] cfg80211_ch_switch_notify+0x150/0x170 [cfg80211] [ 13.231992] [] rtw_cfg80211_ch_switch_notify+0x94/0x98 [rtl8822ce] [ 13.232869] [] rtw_chk_start_clnt_join+0x43c/0x4d8 [rtl8822ce] [ 13.233737] [] join_cmd_hdl+0x238/0x330 [rtl8822ce] [ 13.234613] [] rtw_cmd_thread+0x308/0x608 [rtl8822ce] [ 13.234627] [] kthread+0xec/0xf0 [ 13.234637] [] ret_from_fork+0x10/0x30 [ 13.340862] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 19.638820] FAN rising trip_level:1 cur_temp:46350 trip_temps[2]:60000 [ 34.134523] vdd-1v8-sd: disabling [ 34.134532] vdd-1v8-cvb: disabling [ 34.134537] vdd-epb-1v0: disabling [ 34.134542] avdd-cam-2v8: disabling [ 34.134547] vdd_sys_en: disabling [ 101.477713] tegradc 15200000.nvdisplay: blank - powerdown [ 101.535391] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 101.535395] Extcon AUX1(HDMI) disable [ 101.564975] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 101.566858] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 101.567456] tegradc 15210000.nvdisplay: blank - powerdown [ 101.741861] tegradc 15200000.nvdisplay: blank - powerdown [ 101.741881] tegradc 15200000.nvdisplay: unblank [ 101.755071] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 101.755244] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 101.760418] Parent Clock set for DC plld2 [ 101.768034] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 101.769484] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 101.805019] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 101.805023] Extcon AUX1(HDMI) enable [ 101.805149] tegradc 15200000.nvdisplay: unblank [ 101.805163] tegradc 15210000.nvdisplay: blank - powerdown [ 103.174938] fuse init (API version 7.26) [ 105.979254] tegradc 15200000.nvdisplay: unblank [ 105.979271] tegradc 15210000.nvdisplay: blank - powerdown [ 118.194180] FAN cooling trip_level:0 cur_temp:37850 trip_temps[1]:46000 [ 328.758120] FAN rising trip_level:1 cur_temp:46000 trip_temps[2]:60000 [ 425.080123] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 672.596607] FAN rising trip_level:1 cur_temp:46000 trip_temps[2]:60000 [ 758.835561] FAN cooling trip_level:0 cur_temp:37900 trip_temps[1]:46000 [ 867.511170] tegradc 15200000.nvdisplay: blank - powerdown [ 867.569759] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 867.569765] Extcon AUX1(HDMI) disable [ 867.593028] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 867.593624] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 871.067661] extcon-disp-state external-connection:disp-state: cable 51 state 0 [ 871.067689] Extcon HDMI: HPD disabled [ 871.067794] tegradc 15200000.nvdisplay: hdmi: unplugged [ 871.091245] tegradc 15200000.nvdisplay: blank - powerdown [ 871.091263] tegradc 15200000.nvdisplay: unblank [ 871.091287] tegradc 15200000.nvdisplay: unblank [ 871.091300] tegradc 15210000.nvdisplay: blank - powerdown [ 871.298228] tegradc 15200000.nvdisplay: blank - powerdown [ 871.298251] tegradc 15200000.nvdisplay: unblank [ 871.299365] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 871.299535] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 871.304932] Parent Clock set for DC plld2 [ 871.312057] tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 871.313433] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 871.348028] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 871.348033] Extcon AUX1(HDMI) enable [ 871.348286] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 871.348292] Extcon HDMI: HPD enabled [ 871.348330] tegradc 15200000.nvdisplay: hdmi: plugged [ 871.377301] tegradc 15200000.nvdisplay: unblank [ 871.377315] tegradc 15210000.nvdisplay: blank - powerdown [ 871.441344] tegradc 15200000.nvdisplay: unblank [ 871.441359] tegradc 15210000.nvdisplay: blank - powerdown [ 896.954895] usb 1-2.3: new high-speed USB device number 5 using tegra-xusb [ 896.978346] usb 1-2.3: New USB device found, idVendor=0930, idProduct=6544 [ 896.978357] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 896.978363] usb 1-2.3: Product: TransMemory [ 896.978368] usb 1-2.3: Manufacturer: TOSHIBA [ 896.978374] usb 1-2.3: SerialNumber: 23C84FC4F98CCCB17DD476BA [ 896.979703] usb-storage 1-2.3:1.0: USB Mass Storage device detected [ 896.980095] scsi host0: usb-storage 1-2.3:1.0 [ 898.023492] scsi 0:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4 [ 898.025102] sd 0:0:0:0: [sda] 30297216 512-byte logical blocks: (15.5 GB/14.4 GiB) [ 898.025776] sd 0:0:0:0: [sda] Write Protect is off [ 898.025966] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 898.026285] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 898.032252] sda: sda1 [ 898.033892] sd 0:0:0:0: [sda] Attached SCSI removable disk