▒▒ [0000.066] I> MB1 (version: 0.11.0.0-t234-54845784-7fb1fa27) [0000.071] I> t234-A01-0-Silicon (0x12347) Prod [0000.076] I> Boot-mode : Coldboot [0000.079] I> Emulation: [0000.081] I> Entry timestamp: 0x00000000 [0000.085] I> last_boot_error: 0x0 [0000.088] I> BR-BCT: preprod_dev_sign: 0 [0000.092] I> rst_source: 0x0, rst_level: 0x0 [0000.096] I> Task: Clocks enable (0x50011b9d) [0000.100] I> Task: Crypto init (0x50018df5) [0000.104] I> Task: Secure debug controls (0x5000c76d) [0000.109] E> Error: ECID of check failed!! [0000.113] E> Error: ECID of check failed!! [0000.117] E> Error: ECID of check failed!! [0000.121] E> Error: ECID of check failed!! [0000.125] I> Task: Program NV master stream id (0x5000c725) [0000.130] I> Task: Verify boot mode (0xd482021) [0000.139] I> Task: Alias fuses (0x5000ecd5) [0000.143] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0000.150] I> Task: 0x5000e911 [0000.153] I> FUSE_OPT_CCPLEX_CLUSTER_DISABLE = 0x00000000 [0000.158] I> FUSE_OPT_GPC_DISABLE = 0x00000000 [0000.162] I> FUSE_OPT_DLA_DISABLE = 0x00000000 [0000.166] I> FUSE_OPT_EMC_DISABLE = 0x00000000 [0000.171] I> FUSE_BOOTROM_PATCH_VERSION = 0x7 [0000.175] I> FUSE_PSCROM_PATCH_VERSION = 0x7 [0000.179] I> FUSE_OPT_ADC_CAL_FUSE_REV = 0x2 [0000.183] I> FUSE_SKU_INFO_0 = 0xd0 [0000.186] I> FUSE_OPT_SAMPLE_TYPE_0 = 0x3 PS [0000.190] I> FUSE_PACKAGE_INFO_0 = 0x2 [0000.194] I> SKU: Perfect F0 [0000.197] I> Task: Voltage monitor (0x50011ba5) [0000.201] I> VMON: Vmon re-calibration and fine tuning done [0000.206] I> Task: Blockdev init (0x500157e1) [0000.211] I> Task: UPHY init (0x5001b42d) [0000.215] E> UPHY: UPHY lane info table is empty in MB1 BCT. [0000.220] I> Task: Boot device init (0x5000d6a9) [0000.225] E> Adding eMMC storage modules [0000.228] I> Boot-device: QSPI (instance: 0) [0000.232] I> qspi flash params source = mb1bct [0000.237] I> Qspi clock source : pllc_out0 [0000.241] I> QSPI-0l initialized successfully [0000.245] I> Task: TSC init (0x5001c7e1) [0000.249] I> Task: Enable WDT 5th expiry (0x5001d27d) [0000.254] I> Task: Disable WDT globally (0x5001d2b9) [0000.259] I> Task: I2C register (0x50000a09) [0000.263] I> Task: Reset FSI (0x50011ba1) [0000.267] I> Task: Pinmux init (0x50010e95) [0000.271] I> Task: Prod config init (0x50011075) [0000.276] I> Task: Pad voltage init (0x50010f85) [0000.280] I> Task: Prod init (0x50011119) [0000.284] I> Task: Thermal check (0x5001121d) [0000.288] I> max_chip_limit = 115 [0000.291] I> min_chip_limit = -30 [0000.305] I> max temp read = 29 [0000.308] I> min temp read = 28 [0000.310] I> Task: Common rail init (0x50011695) [0000.315] W> Thermal config not found in BCT [0000.319] W> Generic i2c config not found in BCT [0000.324] > DEVICE_PROD: module = 13, instance = 4 not found in device prod. [0000.332] W> MEMIO rail config not found in BCT [0000.337] I> Task: Mem clock src (0x5000f6b9) [0000.341] I> Task: BR PMIC seq (0x50011711) [0000.345] I> Task: Misc. board config (0x500116ed) [0000.350] W> Platform config not found in BCT [0000.354] I> Task: Load membct (0x5000f5d5) [0000.358] I> RAM_CODE 0x4000401 [0000.361] I> Loading MEM-BCT to SysRAM [0000.365] I> Scratch RSV109: 0x00000001 active chain: 0 [0000.370] I> Slot: 0 [0000.372] I> Binary[0] block-0 (partition size: 0x40000) [0000.377] I> get_binary_info: Binary name: MEM-BCT-0 [0000.382] I> Size of crypto header is 8192 [0000.386] I> BCH load address is : 0x40050000 [0000.390] I> Size of crypto header is 8192 [0000.394] I> BCH of MEM-BCT-0 read from storage [0000.399] I> BCH address is : 0x40050000 [0000.403] I> MEM-BCT-0 header integrity check is success [0000.408] I> Binary magic in BCH component 0 is MEM0 [0000.413] I> component binary type is 0 [0000.417] I> MEM-BCT-0 binary is read from storage [0000.422] I> MEM-BCT-0 binary integrity check is success [0000.427] I> Binary MEM-BCT-0 loaded successfully at 0x40040000 (0xe580) [0000.437] I> RAM_CODE 0x4000401 [0000.441] I> Task: Save mem-bct info (0x50011d59) [0000.446] I> Task: SDRAM params override (0x50010c79) [0000.451] I> Task: Carveout allocate (0x50011da5) [0000.455] I> RCM blob carveout will not be allocated [0000.460] I> ECC region[0]: Start:0x0, End:0x0 [0000.464] I> ECC region[1]: Start:0x0, End:0x0 [0000.469] I> ECC region[2]: Start:0x0, End:0x0 [0000.473] I> ECC region[3]: Start:0x0, End:0x0 [0000.477] I> ECC region[4]: Start:0x0, End:0x0 [0000.481] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.487] I> Non-ECC region[1]: Start:0x0, End:0x0 [0000.492] I> Non-ECC region[2]: Start:0x0, End:0x0 [0000.497] I> Non-ECC region[3]: Start:0x0, End:0x0 [0000.501] I> Non-ECC region[4]: Start:0x0, End:0x0 [0000.508] I> allocated(CO:51) base:0x80000000 size:0x8000000 align: 0x200000 [0000.515] I> allocated(CO:44) base:0xd6000000 size:0x2a000000 align: 0x100000 [0000.522] I> allocated(CO:31) base:0xce000000 size:0x8000000 align: 0x100000 [0000.529] I> allocated(CO:39) base:0xc8000000 size:0x6000000 align: 0x200000 [0000.536] I> allocated(CO:20) base:0xc6000000 size:0x2000000 align: 0x2000000 [0000.543] I> allocated(CO:24) base:0xc4000000 size:0x2000000 align: 0x2000000 [0000.550] I> allocated(CO:28) base:0xc2000000 size:0x2000000 align: 0x2000000 [0000.557] I> allocated(CO:29) base:0xc0000000 size:0x2000000 align: 0x2000000 [0000.564] I> allocated(CO:41) base:0xbf000000 size:0x1000000 align: 0x100000 [0000.571] I> allocated(CO:43) base:0xbe000000 size:0x1000000 align: 0x200000 [0000.578] I> allocated(CO:02) base:0xbd800000 size:0x800000 align: 0x800000 [0000.584] I> allocated(CO:03) base:0xbd000000 size:0x800000 align: 0x800000 [0000.591] I> allocated(CO:06) base:0xbc800000 size:0x800000 align: 0x800000 [0000.598] I> allocated(CO:10) base:0xbc000000 size:0x800000 align: 0x800000 [0000.605] I> allocated(CO:56) base:0xbb800000 size:0x800000 align: 0x200000 [0000.612] I> allocated(CO:07) base:0xbb400000 size:0x400000 align: 0x400000 [0000.619] I> allocated(CO:22) base:0xbb000000 size:0x400000 align: 0x400000 [0000.625] I> allocated(CO:33) base:0xbac00000 size:0x400000 align: 0x200000 [0000.632] I> allocated(CO:47) base:0xba800000 size:0x400000 align: 0x200000 [0000.639] I> allocated(CO:01) base:0xba700000 size:0x100000 align: 0x100000 [0000.646] I> allocated(CO:04) base:0xba600000 size:0x100000 align: 0x100000 [0000.653] I> allocated(CO:05) base:0xba500000 size:0x100000 align: 0x100000 [0000.660] I> allocated(CO:08) base:0xba400000 size:0x100000 align: 0x100000 [0000.666] I> allocated(CO:09) base:0xba300000 size:0x100000 align: 0x100000 [0000.673] I> allocated(CO:15) base:0xba200000 size:0x100000 align: 0x100000 [0000.680] I> allocated(CO:17) base:0xba100000 size:0x100000 align: 0x100000 [0000.687] I> allocated(CO:23) base:0xba000000 size:0x100000 align: 0x100000 [0000.694] I> allocated(CO:27) base:0xb9f00000 size:0x100000 align: 0x100000 [0000.701] I> allocated(CO:42) base:0xb9e00000 size:0x100000 align: 0x100000 [0000.707] I> allocated(CO:54) base:0xb9d80000 size:0x80000 align: 0x80000 [0000.714] I> allocated(CO:26) base:0xb9d40000 size:0x40000 align: 0x2000 [0000.721] I> allocated(CO:48) base:0xb9d20000 size:0x20000 align: 0x10000 [0000.727] I> allocated(CO:34) base:0xb9d10000 size:0x10000 align: 0x10000 [0000.734] I> allocated(CO:35) base:0xb9d00000 size:0x10000 align: 0x10000 [0000.741] I> allocated(CO:49) base:0xb9cf0000 size:0x10000 align: 0x10000 [0000.747] I> allocated(CO:50) base:0xb9ce0000 size:0x10000 align: 0x10000 [0000.754] I> allocated(CO:52) base:0xb9cd0000 size:0x10000 align: 0x10000 [0000.760] I> Task: SDRAM init (0x5000f6bd) [0000.767] I> SDRAM-params @ 0xd485000 [0000.770] I> MSS code-drop: NvBootSdramInit [0000.774] I> MSS CAR: PLLM/HUB programming for MemoryType: 4 and MemBctRevision : 8 [0000.782] I> MSS CAR: Init PLLM [0000.785] I> MSS CAR: Init PLLHUB [0000.795] I> mb1_sdram_init Done ! [0000.799] I> SDRAM Size in Total 800000000 [0000.803] I> SDRAM test pass [0000.805] I> Task: Dram ecc scrub (0x5000f2c9) [0000.810] I> Task: DRAM alias check (0x50010c71) [0001.026] I> Task: Register checker (0x50010c75) [0001.035] I> Task: Enable clock-mon (0x5001c301) [0001.052] I> FMON: Fmon re-programmed in mb1 [0001.056] I> Task: Mapper init (0x5001a0d5) [0001.061] I> Task: SC7 Context Init (0x5001cacd) [0001.067] I> NV_SC7 Context addr: 0xa0000000 [0001.073] I> Task: CCPLEX IST init (0x5000ce75) [0001.079] I> Task: CPU WP0 (0x5000c2c9) [0001.084] I> Loading MCE [0001.087] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.093] I> Slot: 0 [0001.095] I> Binary[8] block-0 (partition size: 0x80000) [0001.101] I> get_binary_info: Binary name: MCE [0001.106] I> Size of crypto header is 8192 [0001.110] I> BCH load address is : 0x4003e000 [0001.116] I> Size of crypto header is 8192 [0001.121] I> BCH of MCE read from storage [0001.125] I> BCH address is : 0x4003e000 [0001.130] I> MCE header integrity check is success [0001.136] I> Binary magic in BCH component 0 is MTSM [0001.141] I> component binary type is 8 [0001.145] I> Size of crypto header is 8192 [0001.151] I> MCE binary is read from storage [0001.157] I> MCE binary integrity check is success [0001.162] I> Binary MCE loaded successfully at 0x40000000 (0x29e90) [0001.170] I> Size of crypto header is 8192 [0001.181] I> Size of crypto header is 8192 [0001.186] I> Sending WP0 mailbox command to PSC [0001.198] I> Task: MB1 fixed firewalls (0x5001b1bd) [0001.210] I> Task: Load bpmp-fw (0x5001b311) [0001.216] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.221] I> Slot: 0 [0001.224] I> Binary[15] block-0 (partition size: 0x100000) [0001.230] I> get_binary_info: Binary name: BPMP_FW [0001.235] I> Size of crypto header is 8192 [0001.240] I> BCH load address is : 0x807fe000 [0001.245] I> Size of crypto header is 8192 [0001.250] I> BCH of BPMP_FW read from storage [0001.255] I> BCH address is : 0x807fe000 [0001.260] I> BPMP_FW header integrity check is success [0001.266] I> Binary magic in BCH component 0 is BPMF [0001.271] I> component binary type is 15 [0001.275] I> Size of crypto header is 8192 [0001.290] I> BPMP_FW binary is read from storage [0001.298] I> BPMP_FW binary integrity check is success [0001.303] I> Binary BPMP_FW loaded successfully at 0x80000000 (0xf3940) [0001.311] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.317] I> Slot: 0 [0001.319] I> Binary[16] block-0 (partition size: 0x100000) [0001.326] I> get_binary_info: Binary name: BPMP_FW_DTB [0001.331] I> Size of crypto header is 8192 [0001.336] I> BCH load address is : 0x807fc000 [0001.341] I> Size of crypto header is 8192 [0001.346] I> BCH of BPMP_FW_DTB read from storage [0001.351] I> BCH address is : 0x807fc000 [0001.357] I> BPMP_FW_DTB header integrity check is success [0001.363] I> Binary magic in BCH component 0 is BPMD [0001.368] I> component binary type is 16 [0001.372] I> Size of crypto header is 8192 [0001.378] I> BPMP_FW_DTB binary is read from storage [0001.384] I> BPMP_FW_DTB binary integrity check is success [0001.390] I> Binary BPMP_FW_DTB loaded successfully at 0x807dbc00 (0x20240) [0001.399] I> Program IPC carveouts [0001.404] I> Task: Load psc-fw (0x5001b3b9) [0001.410] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.416] I> Slot: 0 [0001.418] I> Binary[17] block-0 (partition size: 0x80000) [0001.424] I> get_binary_info: Binary name: PSC_FW [0001.429] I> Size of crypto header is 8192 [0001.434] I> BCH load address is : 0x803fe000 [0001.439] I> Size of crypto header is 8192 [0001.444] I> BCH of PSC_FW read from storage [0001.449] I> BCH address is : 0x803fe000 [0001.454] I> PSC_FW header integrity check is success [0001.460] I> Binary magic in BCH component 0 is PFWP [0001.465] I> component binary type is 17 [0001.469] I> Size of crypto header is 8192 [0001.478] I> PSC_FW binary is read from storage [0001.484] I> PSC_FW binary integrity check is success [0001.489] I> Binary PSC_FW loaded successfully at 0x80000000 (0x57800) [0001.498] I> Task: Load nvdec-fw (0x5001c05d) [0001.503] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.509] I> Slot: 0 [0001.511] I> Binary[7] block-0 (partition size: 0x100000) [0001.518] I> get_binary_info: Binary name: NVDEC [0001.523] I> Size of crypto header is 8192 [0001.527] I> BCH load address is : 0x800fe000 [0001.533] I> Size of crypto header is 8192 [0001.537] I> BCH of NVDEC read from storage [0001.542] I> BCH address is : 0x800fe000 [0001.548] I> NVDEC header integrity check is success [0001.553] I> Binary magic in BCH component 0 is NDEC [0001.558] I> component binary type is 7 [0001.562] I> Size of crypto header is 8192 [0001.569] I> NVDEC binary is read from storage [0001.575] I> NVDEC binary integrity check is success [0001.580] I> Binary NVDEC loaded successfully at 0x80000000 (0x35000) [0001.592] I> Task: Load tsec-fw (0x5001c249) [0001.598] I> TSEC-FW load support not enabled [0001.602] I> Task: TZDRAM setup (0x50012515) [0001.608] I> Task: SC7 context save (0x5001cbd1) [0001.614] I> NV_SC7 Context addr: 0xa0000000 [0001.619] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.625] I> Slot: 0 [0001.628] I> Binary[13] block-0 (partition size: 0x20000) [0001.634] I> get_binary_info: Binary name: SC7-FW [0001.639] I> Size of crypto header is 8192 [0001.643] I> Size of crypto header is 8192 [0001.648] I> BCH load address is : 0xa0002000 [0001.654] I> Size of crypto header is 8192 [0001.658] I> BCH of SC7-FW read from storage [0001.663] I> BCH address is : 0xa0002000 [0001.669] I> SC7-FW header integrity check is success [0001.674] I> Binary magic in BCH component 0 is WB0B [0001.679] I> component binary type is 13 [0001.684] I> Size of crypto header is 8192 [0001.689] I> SC7-FW binary is read from storage [0001.694] I> SC7-FW binary integrity check is success [0001.700] I> Binary SC7-FW loaded successfully at 0xa0004000 (0xa4e0) [0001.708] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.713] I> Slot: 0 [0001.716] I> Binary[22] block-0 (partition size: 0x30000) [0001.722] I> get_binary_info: Binary name: PSC_RF [0001.727] I> Size of crypto header is 8192 [0001.732] I> Size of crypto header is 8192 [0001.736] I> BCH load address is : 0xa000e4e0 [0001.742] I> Size of crypto header is 8192 [0001.747] I> BCH of PSC_RF read from storage [0001.751] I> BCH address is : 0xa000e4e0 [0001.757] I> PSC_RF header integrity check is success [0001.762] I> Binary magic in BCH component 0 is PSCR [0001.767] I> component binary type is 22 [0001.772] I> Size of crypto header is 8192 [0001.778] I> PSC_RF binary is read from storage [0001.783] I> PSC_RF binary integrity check is success [0001.789] I> Binary PSC_RF loaded successfully at 0xa00104e0 (0x1af70) [0001.807] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.813] I> Slot: 0 [0001.816] I> Binary[14] block-0 (partition size: 0x20000) [0001.822] I> get_binary_info: Binary name: MB2_RF [0001.827] I> Size of crypto header is 8192 [0001.831] I> Size of crypto header is 8192 [0001.836] I> BCH load address is : 0xa008c020 [0001.842] I> Size of crypto header is 8192 [0001.846] I> BCH of MB2_RF read from storage [0001.851] I> BCH address is : 0xa008c020 [0001.857] I> MB2_RF header integrity check is success [0001.862] I> Binary magic in BCH component 0 is MB2R [0001.867] I> component binary type is 14 [0001.872] I> Size of crypto header is 8192 [0001.877] I> MB2_RF binary is read from storage [0001.882] I> MB2_RF binary integrity check is success [0001.888] I> Binary MB2_RF loaded successfully at 0xa008e020 (0xd360) [0001.896] E> FUSE_ALIAS: Fuse alias on production fused part is not supported. [0001.904] I> SC7 context fuse-bypass data is empty [0001.909] I> SC7 context save done [0001.913] I> Task: Load MB2/Applet/FSKP (0x5001c305) [0001.919] I> Loading MB2 [0001.922] I> Scratch RSV109: 0x00000001 active chain: 0 [0001.928] I> Slot: 0 [0001.930] I> Binary[6] block-0 (partition size: 0x70000) [0001.936] I> get_binary_info: Binary name: MB2 [0001.941] I> Size of crypto header is 8192 [0001.945] I> BCH load address is : 0x8007e000 [0001.951] I> Size of crypto header is 8192 [0001.956] I> BCH of MB2 read from storage [0001.960] I> BCH address is : 0x8007e000 [0001.966] I> MB2 header integrity check is success [0001.971] I> Binary magic in BCH component 0 is MB2B [0001.976] I> component binary type is 6 [0001.980] I> Size of crypto header is 8192 [0001.989] I> MB2 binary is read from storage [0001.995] I> MB2 binary integrity check is success [0002.000] I> Binary MB2 loaded successfully at 0x80000000 (0x69940) [0002.008] I> Task: Prepare MB2 params (0x5001c3d5) [0002.016] I> MB2-params @ 0x40060000 [0002.023] I> BR-BCT Boot Chain Fields [0002.027] I> u32_non_gpio_select_boot_chain : 0 [0002.032] I> u32_num_boot_chains : 2 [0002.037] I> bf_bl_gpio_select_boot_chain_1b : 0 [0002.042] I> Task: Dram ecc test (0x5000f379) [0002.048] I> Task: Misc NV security settings (0x5000ca35) [0002.054] I> NVDEC sticky bits programming done [0002.059] I> Task: GPIO interrupt map (0x50011a61) [0002.065] I> Task: Disable/Reload WDT (0x5001d2e9) [0002.071] I> Programmed SLCG global override := 0x0 [0002.077] I> MB1: MSS reconfig completed I> MB2 (version: 0.0.0.0-t234-54845784-7ddc80a9) I> t234-A01-0-Silicon (0x12347) I> Boot-mode : Coldboot I> Emulation: I> Entry timestamp: 0x002059f8 I> Regular heap: [base:0x40040000, size:0x10000] I> DMA heap: [base:0xbb800000, size:0x800000] I> Task: Enable hot-plug capability (0x500185c0) I> Task: Set blob address (0x50001c70) I> Task: PSC mailbox init (0x5000c4d8) I> Task: Crypto init (0x500039b4) I> Task: I2C register (0x50001c5c) I> Task: Boot device init (0x50001d2c) I> Boot_device: QSPI_FLASH instance: 0 I> Qspi clock source : pllc_out0 I> QSPI-0l initialized successfully I> qspi flash-0 params source = MB2 params I> sdmmc-3 params source = MB2 params I> Task: Partition Manager Init (0x50001cf8) I> Found 57 partitions in QSPI_FLASH (instance 0) W> Cannot find any partition table for 00000003 > PARTITION_MANAGER: Failed to publish partition. I> Found 11 partitions in SDMMC_USER (instance 3) I> Task: Load and authenticate registered FWs (0x5000ff0c) I> Task: Load AUXP FWs (0x50018164) I> Successfully register SPE FW load task with MB2 loader I> Skipping SCE FW load I> Successfully register RCE FW load task with MB2 loader I> Successfully register DCE FW load task with MB2 loader I> Unpowergating APE I> Unpowergate done I> Successfully register APE FW load task with MB2 loader I> Skipping FSI FW load I> Successfully register XUSB FW load task with MB2 loader I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_spe-fw I> Size of partition: 589824 I> Binary@ device:3/0 block-56320 (partition size: 0x90000), name: A_spe-fw E> Binary spe is not found in comp table I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_rce-fw I> Size of partition: 1048576 I> Binary@ device:3/0 block-57472 (partition size: 0x100000), name: A_rce-fw E> Binary rce is not found in comp table I> spe: Authentication Finalize Done I> Binary spe loaded successfully at 0xba400000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_dce-fw I> Size of partition: 9437184 I> Binary@ device:3/0 block-37888 (partition size: 0x900000), name: A_dce-fw E> Binary dce is not found in comp table I> rce: Authentication Finalize Done I> Binary rce loaded successfully at 0xba100000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_adsp-fw I> Size of partition: 2097152 I> Binary@ device:3/0 block-59520 (partition size: 0x200000), name: A_adsp-fw E> Binary ape is not found in comp table I> dce: Authentication Finalize Done I> Binary dce loaded successfully at 0xc6000000 I> Scratch RSV109: 0x00000001 active chain: 0 I> Partition name: A_xusb-fw I> Size of partition: 262144 I> Binary@ device:3/0 block-10368 (partition size: 0x40000), name: A_xusb-fw E> Binary xusb is not found in comp table I> ape: Authentication Finalize Done I> Binary ape loaded successfully at 0xbb400000 I> xusb: Authentication Finalize Done I> Binary xusb loaded successfully at 0xba500000 I> Task: Carveout setup (0x5001170c) I> Program remaining OEM carveouts I> Task: Restore XUSB sec (0x50001c30) I> Task: OEM firewalls (0x500155c8) I> MB2-BCT Firewall data is empty I> Task: Unhalt AUXPs (0x500183cc) I> Unhalting SPE.. I> Enabling combined UART ▒▒▒▒spe: early_init vic initialized tsc initialized aon lic initialized spe: tag is 9f1f07bc2d4b6509c13554672acefaad spe: SafeRTOS v8.4 spe: init scheduler initialized aon hsp initialized tag initialized tcu initialized bpmp ipc initialized spe: late init cpu_nic clock initialized apb clock initialized pm initialized bpmp hsp initialized top1 hsp initialized ccplex ipc initialized spe: start scheduler ▒▒ I> Task: Trigger mailbox for PSC-BL1 exit (0x5000c558) I> Sending opcode 0x4d420802 to psc ▒▒INFO: Entering psc_monitor_init! INFO: GSC22 BOM:0xbb000000 SIZE:0x400000 CLIENT_ACCESS1:00180000 INFO: PSCFW BUILD VERSION: a796142-39d6527-7490c54-dev INF▒▒I> Received ACK from psc ▒▒O: mstatus:0xa00000808 INFO: Supervisor entry_point:c108c00 INFO: pllpsc is already locked. INFO: MONITOR: user task addr:0xbb022000, blob offset:0x00020000 ▒▒I> Task: Start secure NOR provision (0x5000e298) I> Task: Load FSI keyblob (0x5000c920) I> Skipping FSI key blob▒▒ ▒▒ copy I> Task: Enable FSITHERM (0x5000c4ac) I> Task: Unhalt AUXPs (0x500183d4) I> SCE unhalt skipped I> Unhalting RCE I> RCE unhalt successful I> DCE unhalt successful I> APE unhalt skipped I> FSI unhalt skipped I> Task: Load CPUBL (0x5000d6d0) I> Task: Load TOS (0x5000dc04) I> Task: Load and authenticate registered FWs (0x5000ff0c) I> Scratch RSV109: 0x00000001 active chain: 0▒▒[ 2.482640] Camera-FW on t 234-rce-safe started TCU▒▒INFO: MONITOR: popula▒▒bpmp: ini▒▒ early console enabled. ▒▒ted user images:16 INFO: mret to Supervisor! INFO: psc supervisor init. INFO: psc_irq_init... INFO: enter idle task. ▒▒t bpmp: base binary md5 is f0425a554b39d571b1bbb5291283d946 bpmp: combined binary md5 is 43f75b5aad2b8e1992e4e049bafc8696 bpmp: firmware tag is 43f75b5aad2b8e1992e4-f0425a554b3 initialized vwdt initialized clk_mach_early initializ▒▒ ▒▒ I> Partition name: A_cpu-bootloader I> Size of partition: 3670016 I> Binary@ device:3/0 block-17920 (partition size: 0x380000), name: A_cpu-bootlo ader ▒▒ed mail_early initialized fuse initialized vfrel initialized hwwdt initia▒▒E> Binary cpubl is not found in comp table ▒▒lized adc fmon_populate_monitors: found 199 monitors initialized fmon initialized mc initialized reset initialized uphy_early initialized emc_early 469 clocks registered initialized clk_mach initialized clk_cal_early initialized clk_mach_early_config initialized io_dpd initialized thermal initialized soctherm initialized regime initialized i2c vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rai▒▒I> Scratch RSV109: 0x00000001 active chain : 0 I> Partition name: A_secure-os I> Size of partition: 4194304 I> Binary@ device:3/0 block-25088 (partition ▒▒l monitors initialized vrmon initialized regulator initialized avfs_clk_pla▒▒size: 0x400000), name: A_secure-os ▒▒tform initialized powergate initialized dvs initialized clk_mach_config initialized pm initialized suspend initialized strap initialized emc initialized emc_mrq WARNING @ [platform/drivers/cl▒▒E> Binary tos is not found in comp table ▒▒k/clk-fwk/clk-cal.c]: aon_apb is not configured by BPMP-FW WARNING @ [platform/drivers/clk/clk-fwk/clk-cal.c]: ao▒▒I> MB2-params @ 0x400600 00 I> CPUBL-params @ 0xc200000▒▒n_cpu_nic is not conf▒▒0 ▒▒igured by BPMP-FW initialized clk_cal initialized uphy_dt initialized uphy_mrq initialized uphy initialized pg_late initialized pg_mrq_init swdtimer_init: 0 reg polling start w period 47 ms initialized swdtimer initialized hwwdt_late initialized bwmgr initialized thermal_host_trip initialized thermal_mrq initialized reset_mrq initialized mail_mrq initia▒▒DCE: FW Boot Done ▒▒lized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized i2c_mrq initialized tag_mrq initialized bwmgr_mrq initialized console_mrq initialized mrq missing prod DT calibration data for 199 fmons ini▒▒I> cpubl: Authenticat▒▒tialized clk_sync_fmon_post initialized clk_cal_late ▒▒ion Finalize Done I> Binary cpubl loaded successfully at 0xba800000 ▒▒initia▒▒I> tos: Authenticatio▒▒lized noc_late initialized dbells initialized dmce initialized cvc initialized avfs_clk_mach_post initialized pm_post initialized avfs_clk_platform_post initialized cvc_late initialized rm initialized console_late initialized clk_mach_post initialized pg_post ▒▒[ 2.730233] Camer▒▒n Finalize Done I> Binary tos loaded successfully at 0xbeee7000 ▒▒initialized regulator_post initialized profile initialized fuse_late initialized extras▒▒I> Task: Prepare TOS ▒▒a-FW on t234-rce-safe ready SHA1=d181 de81 (crt 16.533 ms, total boot 265.181 m▒▒params (0x5000db80) I> Task: OEM SC7 context save (0x5000dfd4) ▒▒_post bpmp: init complete ▒▒s) ▒▒I> oem sc7 context saved I> Task: Disable MSS perf stats (0x50018460) I> Task: Program display sticky bits (0x500183dc) I> Task: Storage device deinit (0x50001ca4) I> Task: SMMU init (0x50017e20) I> Task: Program CBB PCIE AMAP regions (0x500031dc) I> Task: Program GICv3 registers (0x50018500) I> Task: Audit firewall settings (0x50015854) I> MB2 finished ▒▒NOTICE: BL31: v2.5(release):ff761c51a NOTICE: BL31: Built : 00:53:36, Mar 15 2022 ERROR: Error initializing runtime service trusty_fast ▒▒ Jetson UEFI firmware (version v1.1.2-0165e807 built on 2022-03-15T00:54:10-07: 00) Jetson UEFI firmware (version v1.1.2-0165e807 built on 2022-03-15T00:54:10-07:00 ) Press ESCAPE for boot options ** WARNING: Test Key is used. ** ...... EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421] [ 0.000000] Linux version 5.10.65-tegra (buildbrain@mobile-u64-5266-d7000) (a arch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Bi nutils) 2.33.1) #1 SMP PREEMPT Tue Mar 15 00:53:43 PDT 2022 [ 0.000000] OF: fdt: memory scan node memory@80000000, reg size 16, [ 0.000000] OF: fdt: - 80000000 , c0000000 [ 0.000000] Machine model: NVIDIA Orin Jetson-Small Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x876c62e18 SMBIOS=0xbabc0000 SMBIOS 3.0=0x853c50000 MEMATTR=0x852a42018 ESRT=0x854025798 RNG=0x854b2ff18 MEMRESERVE=0x852a48f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x0000000854025798 to 0x000000085 40257d0. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000086bc00000, s ize 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id share d-dma-pool [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible i d nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node fsi-carveout, compatible id nv idia,fsi-carveout [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nv idia,vpr-carveout [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000087fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087ffffff] [ 0.000000] node 0: [mem 0x0000000088000000-0x00000000b9ccffff] [ 0.000000] node 0: [mem 0x00000000ba800000-0x00000000ba9affff] [ 0.000000] node 0: [mem 0x00000000babb0000-0x00000000babcffff] [ 0.000000] node 0: [mem 0x00000000babd0000-0x00000000babfffff] [ 0.000000] node 0: [mem 0x00000000c2000000-0x00000000c3ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000085324ffff] [ 0.000000] node 0: [mem 0x0000000853250000-0x000000085328ffff] [ 0.000000] node 0: [mem 0x0000000853290000-0x0000000853a20fff] [ 0.000000] node 0: [mem 0x0000000853a21000-0x0000000853b7afff] [ 0.000000] node 0: [mem 0x0000000853b7b000-0x0000000853c3ffff] [ 0.000000] node 0: [mem 0x0000000853c40000-0x0000000853c5ffff] [ 0.000000] node 0: [mem 0x0000000853c60000-0x00000008546dffff] [ 0.000000] node 0: [mem 0x00000008546e0000-0x00000008548bffff] [ 0.000000] node 0: [mem 0x00000008548c0000-0x000000085497ffff] [ 0.000000] node 0: [mem 0x0000000854980000-0x0000000854abffff] [ 0.000000] node 0: [mem 0x0000000854ac0000-0x0000000854acffff] [ 0.000000] node 0: [mem 0x0000000854ad0000-0x0000000854b2ffff] [ 0.000000] node 0: [mem 0x0000000854b30000-0x0000000854b6ffff] [ 0.000000] node 0: [mem 0x0000000854b70000-0x0000000854ccffff] [ 0.000000] node 0: [mem 0x0000000854cd0000-0x0000000854ceffff] [ 0.000000] node 0: [mem 0x0000000854cf0000-0x0000000854eeffff] [ 0.000000] node 0: [mem 0x0000000854ef0000-0x0000000854f0ffff] [ 0.000000] node 0: [mem 0x0000000854f10000-0x0000000854faffff] [ 0.000000] node 0: [mem 0x0000000854fb0000-0x0000000854fdffff] [ 0.000000] node 0: [mem 0x0000000854fe0000-0x000000085507ffff] [ 0.000000] node 0: [mem 0x0000000855080000-0x000000085516ffff] [ 0.000000] node 0: [mem 0x0000000855170000-0x000000085520ffff] [ 0.000000] node 0: [mem 0x0000000855210000-0x00000008552affff] [ 0.000000] node 0: [mem 0x00000008552b0000-0x000000085534ffff] [ 0.000000] node 0: [mem 0x0000000855350000-0x00000008553affff] [ 0.000000] node 0: [mem 0x00000008553b0000-0x000000085549ffff] [ 0.000000] node 0: [mem 0x00000008554a0000-0x0000000855b7ffff] [ 0.000000] node 0: [mem 0x0000000855b80000-0x0000000855d5ffff] [ 0.000000] node 0: [mem 0x0000000855d60000-0x000000087bc3ffff] [ 0.000000] node 0: [mem 0x000000087bc40000-0x000000087bc8ffff] [ 0.000000] node 0: [mem 0x000000087bc90000-0x000000087fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000087fffffff] [ 0.000000] On node 0, zone DMA: 304 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 80 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 31 pages/cpu s90008 r8192 d28776 u126976 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation disabled by kernel conf iguration [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7983060 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=e xt4 mminit_loglevel=4 console=ttyTCU0,115200 console=tty0 firmware_class.path=/e tc/firmware fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 byt es, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 byte s, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000a9cd0000-0x00000000b9cd000 0] (256MB) [ 0.000000] Memory: 31115968K/32439104K available (18496K kernel code, 3210K rwdata, 7068K rodata, 3904K init, 1069K bss, 1060992K reserved, 262144K cma-rese rved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jif fies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000 [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70) [ 0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677] [ 0.000000] random: get_random_bytes called from start_kernel+0x378/0x4f4 wit h crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000002] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 43980 46511088ns [ 0.000570] Console: colour dummy device 80x25 [ 0.000757] printk: console [tty0] enabled [ 0.000791] Calibrating delay loop (skipped), value calculated using timer fr equency.. 62.50 BogoMIPS (lpj=125000) [ 0.000801] pid_max: default: 32768 minimum: 301 [ 0.000844] LSM: Security Framework initializing [ 0.000909] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, li near) [ 0.000954] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 byte s, linear) [ 0.002514] rcu: Hierarchical SRCU implementation. [ 0.002597] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.002921] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10 /arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/ker nel-dts/tegra234-p3701-0000-p3737-0000.dts [ 0.002929] DTB Build time: Mar 15 2022 01:05:45 [ 0.003986] Tegra Revision: A01 SKU: 0xd0 CPU Process: 0 SoC Process: 0 [ 0.004106] Remapping and enabling EFI services. [ 0.004637] smp: Bringing up secondary CPUs ... [ 0.005023] Detected PIPT I-cache on CPU1 [ 0.005053] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000 [ 0.005077] CPU1: Booted secondary processor 0x0000000100 [0x410fd421] [ 0.005415] Detected PIPT I-cache on CPU2 [ 0.005425] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000 [ 0.005439] CPU2: Booted secondary processor 0x0000000200 [0x410fd421] [ 0.005755] Detected PIPT I-cache on CPU3 [ 0.005764] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000 [ 0.005777] CPU3: Booted secondary processor 0x0000000300 [0x410fd421] [ 0.008100] Detected PIPT I-cache on CPU4 [ 0.008121] GICv3: CPU4: found redistributor 10000 region 0:0x000000000f4c000 0 [ 0.008148] CPU4: Booted secondary processor 0x0000010000 [0x410fd421] [ 0.008517] Detected PIPT I-cache on CPU5 [ 0.008527] GICv3: CPU5: found redistributor 10100 region 0:0x000000000f4e000 0 [ 0.008541] CPU5: Booted secondary processor 0x0000010100 [0x410fd421] [ 0.008874] Detected PIPT I-cache on CPU6 [ 0.008884] GICv3: CPU6: found redistributor 10200 region 0:0x000000000f50000 0 [ 0.008898] CPU6: Booted secondary processor 0x0000010200 [0x410fd421] [ 0.009243] Detected PIPT I-cache on CPU7 [ 0.009253] GICv3: CPU7: found redistributor 10300 region 0:0x000000000f52000 0 [ 0.009267] CPU7: Booted secondary processor 0x0000010300 [0x410fd421] [ 0.011603] Detected PIPT I-cache on CPU8 [ 0.011625] GICv3: CPU8: found redistributor 20000 region 0:0x000000000f54000 0 [ 0.011652] CPU8: Booted secondary processor 0x0000020000 [0x410fd421] [ 0.012017] Detected PIPT I-cache on CPU9 [ 0.012027] GICv3: CPU9: found redistributor 20100 region 0:0x000000000f56000 0 [ 0.012042] CPU9: Booted secondary processor 0x0000020100 [0x410fd421] [ 0.012386] Detected PIPT I-cache on CPU10 [ 0.012396] GICv3: CPU10: found redistributor 20200 region 0:0x000000000f5800 00 [ 0.012411] CPU10: Booted secondary processor 0x0000020200 [0x410fd421] [ 0.012744] Detected PIPT I-cache on CPU11 [ 0.012755] GICv3: CPU11: found redistributor 20300 region 0:0x000000000f5a00 00 [ 0.012771] CPU11: Booted secondary processor 0x0000020300 [0x410fd421] [ 0.012823] smp: Brought up 1 node, 12 CPUs [ 0.012888] SMP: Total of 12 processors activated. [ 0.012893] CPU features: detected: Privileged Access Never [ 0.012896] CPU features: detected: LSE atomic instructions [ 0.012898] CPU features: detected: User Access Override [ 0.012901] CPU features: detected: 32-bit EL0 Support [ 0.012904] CPU features: detected: Common not Private translations [ 0.012907] CPU features: detected: RAS Extension Support [ 0.012909] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.012913] CPU features: detected: CRC32 instructions [ 0.012915] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.046425] CPU: All CPU(s) started at EL2 [ 0.048625] devtmpfs: initialized [ 0.057463] Registered cp15_barrier emulation handler [ 0.057475] Registered setend emulation handler [ 0.057481] KASLR enabled [ 0.057565] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns [ 0.057578] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.059122] pinctrl core: initialized pinctrl subsystem [ 0.059783] NET: Registered protocol family 16 [ 0.060632] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.060837] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic all ocations [ 0.061030] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic a llocations [ 0.061091] audit: initializing netlink subsys (disabled) [ 0.061195] audit: type=2000 audit(0.060:1): state=initialized audit_enabled= 0 res=1 [ 0.062153] printk: console [ramoops-1] enabled [ 0.062160] pstore: Registered ramoops as persistent store backend [ 0.062166] ramoops: using 0x200000@0xba9b0000, ecc: 0 [ 0.062321] thermal_sys: Registered thermal governor 'step_wise' [ 0.062322] thermal_sys: Registered thermal governor 'power_allocator' [ 0.062328] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.063234] cpuidle: using governor menu [ 0.063370] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.063472] ASID allocator initialised with 65536 entries [ 0.063610] Serial: AMBA PL011 UART driver [ 0.064980] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful [ 0.065002] Tegra reboot handler registered. [ 0.065076] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10 /arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/ker nel-dts/tegra234-p3701-0000-p3737-0000.dts [ 0.065085] DTB Build time: Mar 15 2022 01:05:45 [ 0.078933] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c10000 [ 0.078951] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c20000 [ 0.078961] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c30000 [ 0.078972] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c40000 [ 0.078983] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2c50000 [ 0.078992] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2b80000 [ 0.079001] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2b90000 [ 0.079009] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2ba0000 [ 0.079018] mc: mapped MMIO address: 0x(____ptrval____) -> 0x2bb0000 [ 0.079026] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1700000 [ 0.079034] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1710000 [ 0.079043] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1720000 [ 0.079051] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1730000 [ 0.079060] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1740000 [ 0.079068] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1750000 [ 0.079076] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1760000 [ 0.079084] mc: mapped MMIO address: 0x(____ptrval____) -> 0x1770000 [ 0.079095] nv-tegra-mc 2c10000.mc: No mssnvlink node [ 0.079112] mc-err: mcerr ops are set to t23x [ 0.079433] tegra23x-cbb 13a00000.cbb-en: secure_irq = 21 [ 0.079495] tegra23x-cbb c600000.aon-en: secure_irq = 22 [ 0.079538] tegra23x-cbb de00000.dce-en: secure_irq = 23 [ 0.079573] tegra23x-cbb be00000.rce-en: secure_irq = 24 [ 0.079607] tegra23x-cbb b600000.sce-en: secure_irq = 25 [ 0.083298] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.083307] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.083313] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.083318] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.084673] ACPI: Interpreter disabled. [ 0.085734] vdd-av1v1-hub: supplied by vdd-5v-sys [ 0.085845] vbusA-cvb: supplied by vdd-5v-sys [ 0.085934] vbusB-cvb: supplied by vdd-5v-sys [ 0.086041] vdd-usbc1-vbus: supplied by vdd-5v-sys [ 0.086128] vdd-usbc2-vbus: supplied by vdd-5v-sys [ 0.086364] iommu: Default domain type: Translated [ 0.086398] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.086546] SCSI subsystem initialized [ 0.086605] usbcore: registered new interface driver usbfs [ 0.086621] usbcore: registered new interface driver hub [ 0.086640] usbcore: registered new device driver usb [ 0.086803] mc: Linux media interface: v0.10 [ 0.086814] videodev: Linux video capture interface: v2.00 [ 0.086951] pps_core: LinuxPPS API ver. 1 registered [ 0.086957] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti [ 0.086964] PTP clock support registered [ 0.087151] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec [ 0.087175] tegra_wdt_t18x 2190000.watchdog: Registered successfully [ 0.088441] Registered efivars operations [ 0.088611] FPGA manager framework [ 0.088788] Advanced Linux Sound Architecture Driver Initialized. [ 0.089053] Bluetooth: Core ver 2.22 [ 0.089070] NET: Registered protocol family 31 [ 0.089075] Bluetooth: HCI device and connection manager initialized [ 0.089085] Bluetooth: HCI socket layer initialized [ 0.089092] Bluetooth: L2CAP socket layer initialized [ 0.089102] Bluetooth: SCO socket layer initialized [ 0.089707] camchar: rtcpu character device driver loaded [ 0.089935] clocksource: Switched to clocksource arch_sys_counter [ 0.249111] VFS: Disk quotas dquot_6.6.0 [ 0.249153] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.249263] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.249540] tegra-carveouts tegra-carveouts: fsi :dma coherent mem declare 0x 00000000bf000000,16777216 [ 0.249553] tegra-carveouts tegra-carveouts: assigned reserved memory node fs i-carveout [ 0.249566] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x 00000000d6000000,704643072 [ 0.249569] pnp: PnP ACPI: disabled [ 0.249576] nvmap_page_pool_init: Total RAM pages: 7844528 [ 0.249589] nvmap_page_pool_init: nvmap page pool size: 980566 pages (3830 MB ) [ 0.249634] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.249730] misc nvmap: created heap vpr base 0x00000000d6000000 size (688128 KiB) [ 0.251229] la/ptsa driver initialized. [ 0.251274] NET: Registered protocol family 2 [ 0.251514] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, li near) [ 0.253406] misc nvmap: created heap fsi base 0x00000000bf000000 size (16384K iB) [ 0.253632] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262 144 bytes, linear) [ 0.253675] TCP established hash table entries: 262144 (order: 9, 2097152 byt es, linear) [ 0.253888] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, line ar) [ 0.254385] TCP: Hash tables configured (established 262144 bind 65536) [ 0.254455] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.254513] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linea r) [ 0.254638] NET: Registered protocol family 1 [ 0.254846] RPC: Registered named UNIX socket transport module. [ 0.254856] RPC: Registered udp transport module. [ 0.254860] RPC: Registered tcp transport module. [ 0.254865] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.254876] PCI: CLS 0 bytes, default 64 [ 0.254972] Trying to unpack rootfs image as initramfs... [ 0.363740] Freeing initrd memory: 8196K [ 0.365490] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters av ailable [ 0.365647] kvm [1]: IPA Size Limit: 48 bits [ 0.365805] kvm [1]: VHE mode initialized successfully [ 0.366414] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 0.367798] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.367994] NFS: Registering the id_resolver key type [ 0.368014] Key type id_resolver registered [ 0.368019] Key type id_legacy registered [ 0.368043] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.368054] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering ... [ 0.368070] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.379255] NET: Registered protocol family 38 [ 0.379276] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 39) [ 0.379335] io scheduler mq-deadline registered [ 0.379341] io scheduler kyber registered [ 0.382668] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.382695] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 0.382712] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.382728] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.384789] tegra_dc_assign_hw_data: no matching compatible node [ 0.384797] tegradccommon module_init failed [ 0.384802] tegradc module_init failed [ 0.384999] EINJ: ACPI disabled. [ 0.386132] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.386143] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 0.386149] tegra-pmc: ### PMC reset level: L0 [ 0.386154] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.387169] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.391646] random: fast init done [ 0.392260] printk: console [ttyTCU0] enabled [ 2.147474] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.153399] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.157938] arm-smmu 12000000.iommu: stage 1 translation [ 2.163274] arm-smmu 12000000.iommu: stage 2 translation [ 2.168786] arm-smmu 12000000.iommu: nested translation [ 2.173951] arm-smmu 12000000.iommu: stream matching with 128 registe r groups [ 2.181125] arm-smmu 12000000.iommu: 128 context banks (0 stage-2 onl y) [ 2.189401] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.194162] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.200722] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.207853] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.213762] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.218486] arm-smmu 10000000.iommu: stage 1 translation [ 2.223997] arm-smmu 10000000.iommu: stage 2 translation [ 2.229423] arm-smmu 10000000.iommu: nested translation [ 2.234849] arm-smmu 10000000.iommu: stream matching with 128 registe r groups [ 2.242024] arm-smmu 10000000.iommu: 128 context banks (0 stage-2 onl y) [ 2.250319] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.255237] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.261799] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.268719] arm-smmu 8000000.iommu: probing hardware configuration... [ 2.274927] arm-smmu 8000000.iommu: SMMUv2 with: [ 2.279649] arm-smmu 8000000.iommu: stage 1 translation [ 2.285161] arm-smmu 8000000.iommu: stage 2 translation [ 2.290585] arm-smmu 8000000.iommu: nested translation [ 2.295749] arm-smmu 8000000.iommu: stream matching with 128 register groups [ 2.302923] arm-smmu 8000000.iommu: 128 context banks (0 stage-2 only) [ 2.311220] arm-smmu 8000000.iommu: Supported page sizes: 0x00001000 [ 2.316138] arm-smmu 8000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.322699] arm-smmu 8000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.329763] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe su ccessful [ 2.338659] tegra_profiler: version: 1.146, samples/io: 49/28 [ 2.342896] tegra_profiler: auth: init [ 2.347637] tegra23x-qspi 3270000.spi: Adding to iommu group 0 [ 2.353222] libphy: Fixed MDIO Bus: probed [ 2.356656] tun: Universal TUN/TAP device driver, 1.6 [ 2.362220] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - versio n [ 2.368988] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.374516] e1000e: Intel(R) PRO/1000 Network Driver [ 2.379311] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.385276] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.390685] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.396518] PPP generic driver version 2.4.2 [ 2.400875] PPP BSD Compression module registered [ 2.405567] PPP Deflate Compression module registered [ 2.410827] PPP MPPE Compression module registered [ 2.415642] usbcore: registered new interface driver r8152 [ 2.420968] usbcore: registered new interface driver asix [ 2.426395] usbcore: registered new interface driver ax88179_178a [ 2.432516] usbcore: registered new interface driver cdc_ether [ 2.438465] usbcore: registered new interface driver net1080 [ 2.444068] usbcore: registered new interface driver cdc_subset [ 2.450103] usbcore: registered new interface driver zaurus [ 2.455794] usbcore: registered new interface driver cdc_ncm [ 2.461482] usbcore: registered new interface driver aqc111 [ 2.466994] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.473205] ohci-pci: OHCI PCI platform driver [ 2.477498] ohci-platform: OHCI generic platform driver [ 2.482821] tegra-xusb 3610000.xhci: Adding to iommu group 1 [ 2.488637] usbcore: registered new interface driver uas [ 2.493778] usbcore: registered new interface driver usb-storage [ 2.499743] tegra-xudc 3550000.xudc: Adding to iommu group 2 [ 2.505578] mousedev: PS/2 mouse device common for all mice [ 2.510929] usbcore: registered new interface driver xpad [ 2.518157] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.521681] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:1 6 UTC (16) [ 2.529474] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.535676] i2c /dev entries driver [ 2.539266] tegra-i2c 3160000.i2c: Adding to iommu group 3 [ 2.544826] tegra-i2c c240000.i2c: Adding to iommu group 3 [ 2.550245] tegra-i2c 3180000.i2c: Adding to iommu group 3 [ 2.555671] tegra-i2c 3190000.i2c: Adding to iommu group 3 [ 2.560994] tegra-i2c 31b0000.i2c: Adding to iommu group 3 [ 2.566507] tegra-i2c 31c0000.i2c: Adding to iommu group 3 [ 2.571937] tegra-i2c c250000.i2c: Adding to iommu group 3 [ 2.577271] tegra-i2c 31e0000.i2c: Adding to iommu group 3 [ 2.584353] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not ena bled endpoint. [ 2.590890] tegra-camrtc-capture-vi tegra-capture-vi: ep of_device is not ena bled endpoint. [ 2.599901] device-mapper: uevent: version 1.0.3 [ 2.603826] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-d evel@redhat.com [ 2.613015] sdhci: Secure Digital Host Controller Interface driver [ 2.618541] sdhci: Copyright(c) Pierre Ossman [ 2.622999] Synopsys Designware Multimedia Card Interface Driver [ 2.629105] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.634964] sdhci-tegra 3460000.sdhci: Adding to iommu group 4 [ 2.635013] sdhci-tegra 3400000.sdhci: Adding to iommu group 5 [ 2.635637] pstore: ignoring unexpected backend 'efi' [ 2.635719] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401 [ 2.640973] tegra-bpmp bpmp: firmware: 43f75b5aad2b8e1992e4-f0425a554b3 ▒▒debugfs initialized ▒▒[ 4.453270] hid: raw HID events driver (C) Jiri Kosina [ 4.453924] usbcore: registered new interface driver usbhid [ 4.454088] usbhid: USB HID core driver [ 4.454409] tegra-dce d800000.dce: Adding to iommu group 6 [ 4.456064] dce: dce_ipc_channel_init:314 Invalid Channel State [0x0] for ch _type [2] [ 4.457926] dce: dce_wait_boot_complete:100 dce is ready to receive bootstra p commands [ 4.458005] tegra234-aon c000000.aon: Adding to iommu group 7 [ 4.459484] c000000.aon:hsp: probed [ 4.459747] tegra234-aon c000000.aon: init done [ 4.460136] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 8 [ 4.460889] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA =0xbff00000 [ 4.462978] dce: dce_▒▒Starting RmBootstrap Registered event_type:[0] for dce_core_ipc_type:[1] Reg▒▒mailbox_set_full_interrupt:165 Intr bit set multiple times for MB : [0x5] [ 4.463231] dce: dce_admin_ipc_handle_signal:119 Spurious signal on channel: [0]. Ignored... [ 4.463476] dce: dce_admin_send_cmd_ver:424 version : [0x2] err : [0x0] [ 4.463758] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple ti mes for MB : [0x1] [ 4.463978] tegra-ivc▒▒istered event_type:[1▒▒-bus bc00000.rtcpu:ivc-bus: reg ion 0: iova=0xbfec0000-0xbfee01ff size=131584 ▒▒] for dce_core_ipc_type:[3] dce_ipc State Initialized RmBootstrap completed successfully ▒▒[ 4.464002] dce: dce_admin_setup_clients_ipc:480 Channel Reset Complete fo r Type [1] ... [ 4.464003] dce: dce_admin_ipc_handle_signal:119 Spurious signal on channel: [1]. Ignored... [ 4.464014] dce: dce_admin_ipc_handle_signal:119 Spurious signal on channel: [1]. Ignored... [ 4.468477] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[ 16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.476743] dce: dce_admin_setup_clients_ipc:456 Get queue info failed for [ 2] [ 4.477292] dce: dce_mailbox_set_full_interrupt:165 Intr bit set multiple ti mes for MB : [0x2] [ 4.485694] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x 448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.493808] dce: dce_admin_setup_clients_ipc:480 Channel Reset Complete for Type [3] ... [ 4.493810] dce: dce_admin_ipc_handle_signal:119 Spurious signal on channel: [3]. Ignored... [ 4.493817] dce: dce_admin_ipc_handle_signal:119 Spurious signal on channel: [3]. Ignored... [ 4.512472] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x 8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.519273] dce: dce_worker:209 DCE_BOOT_DONE [ 4.528327] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver =0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.603128] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver =0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.615543] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[ 1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.627027] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (115) [ 4.633199] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is succ essful [ 4.644250] random: crng init done [ 4.644366] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d181de8166af6449f909c41fab97802a72d5699e [ 4.657519] t19x_cache tegra-cache: probed [ 4.659981] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU [ 4.687010] nvpmodel: initialized successfully [ 4.687463] tegra_hv: get_hvd: not initialized yet [ 4.687652] user_ivc_mempool: hypervisor not present [ 4.688425] usbcore: registered new interface driver snd-usb-audio [ 4.689285] u32 classifier [ 4.689370] input device check on [ 4.692879] Actions configured [ 4.696415] Initializing XFRM netlink socket [ 4.700888] NET: Registered protocol family 10 [ 4.706266] Segment Routing with IPv6 [ 4.708563] NET: Registered protocol family 17 [ 4.713011] NET: Registered protocol family 15 [ 4.717507] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.730869] Bluetooth: RFCOMM socket layer initialized [ 4.735505] Bluetooth: RFCOMM ver 1.11 [ 4.739427] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.745288] Bluetooth: HIDP socket layer initialized [ 4.750966] 9pnet: Installing 9P2000 support [ 4.754699] Key type dns_resolver registered [ 4.759797] registered taskstats version 1 [ 4.763457] pstore: Using crash dump compression: deflate [ 4.768767] tegra194-pcie 14100000.pcie: Adding to iommu group 9 [ 4.779804] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 4.781301] tegra194-pcie 14160000.pcie: Adding to iommu group 10 [ 4.792221] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 4.793708] tegra194-pcie 141a0000.pcie: Adding to iommu group 11 [ 4.804417] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 4.825864] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 3 [ 4.827011] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels [ 4.827426] host1x 13e40000.host1x: Adding to iommu group 12 [ 5.835299] t23x_init_gating_regs: Timed out waiting for syncpt ram init! [ 5.847200] host1x 13e40000.host1x: initialized [ 5.847620] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu gro up 13 [ 5.848087] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (stream id=53, iommu=smmu.0x0000000012000000) [ 5.849695] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu gro up 14 [ 5.850198] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (stream id=54, iommu=smmu.0x0000000012000000) [ 5.851733] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu gro up 15 [ 5.852120] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (stream id=55, iommu=smmu.0x0000000012000000) [ 5.853649] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu gro up 16 [ 5.854063] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (stream id=56, iommu=smmu.0x0000000012000000) [ 5.855598] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu gro up 17 [ 5.856040] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (stream id=57, iommu=smmu.0x0000000012000000) [ 5.857583] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu gro up 18 [ 5.857982] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (stream id=58, iommu=smmu.0x0000000012000000) [ 5.869231] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu gro up 19 [ 5.875817] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (stream id=59, iommu=smmu.0x0000000012000000) [ 5.887255] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu gro up 20 [ 5.893804] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (stream id=60, iommu=smmu.0x0000000012000000) [ 5.905288] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu gro up 21 [ 5.911886] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (stream id=53, iommu=smmu.0x0000000008000000) [ 5.923310] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu gro up 22 [ 5.929862] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (stream id=54, iommu=smmu.0x0000000008000000) [ 5.941321] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu gro up 23 [ 5.947878] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (stream id=55, iommu=smmu.0x0000000008000000) [ 5.959363] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu gro up 24 [ 5.965891] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (stream id=56, iommu=smmu.0x0000000008000000) [ 5.977387] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu gro up 25 [ 5.983943] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (stream id=57, iommu=smmu.0x0000000008000000) [ 5.995409] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu gro up 26 [ 6.001962] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (stream id=58, iommu=smmu.0x0000000008000000) [ 6.013412] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu gro up 27 [ 6.019980] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (stream id=59, iommu=smmu.0x0000000008000000) [ 6.031446] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu gro up 28 [ 6.038030] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (stream id=60, iommu=smmu.0x0000000008000000) [ 6.049506] falcon 15340000.vic: Adding to iommu group 29 [ 6.059893] falcon 15340000.vic: initialized [ 6.060235] falcon 15380000.nvjpg: Adding to iommu group 30 [ 6.067029] falcon 15380000.nvjpg: initialized [ 6.068440] falcon 15540000.nvjpg1: Adding to iommu group 31 [ 6.077007] falcon 15540000.nvjpg1: initialized [ 6.078889] falcon 154c0000.nvenc: Adding to iommu group 32 [ 6.087672] falcon 154c0000.nvenc: initialized [ 6.089092] falcon 15a50000.ofa: Adding to iommu group 33 [ 6.097878] falcon 15a50000.ofa: initialized [ 6.098997] nvdec 15480000.nvdec: Adding to iommu group 34 [ 6.108762] nvdec 15480000.nvdec: initialized [ 6.109005] tsec 15500000.tsec: Adding to iommu group 35 [ 6.118242] tsec 15500000.tsec: initialized [ 6.120026] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.131173] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.137627] gpio-394 (camera-control-output-low): hogged as output/low [ 6.138273] gpio-397 (camera-control-output-low): hogged as output/low [ 6.144746] gpio-487 (camera-control-output-low): hogged as output/low [ 6.150960] gpio-486 (camera-control-output-low): hogged as output/low [ 6.158349] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio [ 6.164394] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon [ 6.170493] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.176636] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops [ 6.182262] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.187825] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.195288] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs [ 6.201533] tegra194-isp5 14800000.isp: Adding to iommu group 36 [ 6.209945] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disa bled due to no IOMMU [ 6.216529] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized [ 6.222866] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 37 [ 6.230482] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 38 [ 6.237564] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU [ 6.246928] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized [ 6.252890] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: grid-of-semaphores not supported [ 6.260995] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU [ 6.270582] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized [ 6.276774] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: grid-of-semaphores not supported [ 6.285237] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.294901] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized [ 6.301099] scare-pigeon 13e40000.host1x:isp-thi@14b00000: grid-of-semaphores not supported [ 6.309593] pva 16000000.pva0: Adding to iommu group 39 [ 6.333041] pva 16000000.pva0: initialized [ 6.339167] nvdla 15880000.nvdla0: Adding to iommu group 40 [ 6.348968] nvdla 15880000.nvdla0: initialized [ 6.350638] nvdla 158c0000.nvdla1: Adding to iommu group 41 [ 6.359556] nvdla 158c0000.nvdla1: initialized [ 6.361224] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.361443] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.361808] serial-tegra 3100000.serial: Adding to iommu group 3 [ 6.362330] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 13, base_baud = 0) is a TEGRA_UART [ 6.367656] serial-tegra 3130000.serial: Adding to iommu group 3 [ 6.373344] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 64, base_baud = 0) is a TEGRA_UART [ 6.404902] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release [ 6.405228] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.405445] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus num ber 1 [ 6.406487] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810 [ 6.413738] tegra-xusb 3610000.xhci: irq 232, io mem 0x03610000 [ 6.419840] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.10 [ 6.427971] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 6.435148] usb usb1: Product: xHCI Host Controller [ 6.440132] usb usb1: Manufacturer: Linux 5.10.65-tegra xhci-hcd [ 6.446169] usb usb1: SerialNumber: 3610000.xhci [ 6.451577] hub 1-0:1.0: USB hub found [ 6.454690] hub 1-0:1.0: 4 ports detected [ 6.458881] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.464114] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus num ber 2 [ 6.471729] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpee d [ 6.479147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 5.10 [ 6.487304] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 6.494558] usb usb2: Product: xHCI Host Controller [ 6.499544] usb usb2: Manufacturer: Linux 5.10.65-tegra xhci-hcd [ 6.505494] usb usb2: SerialNumber: 3610000.xhci [ 6.510557] hub 2-0:1.0: USB hub found [ 6.514085] hub 2-0:1.0: 4 ports detected [ 6.519228] bwmgr API not supported [ 6.519234] tegra-xusb 3610000.xhci: can't register EMC bwmgr (-22) [ 6.550896] cpufreq: cpufreq_online: CPU0: Running at unlisted initial freque ncy: 2009000 KHz, changing to: 2035200 KHz [ 6.553658] cpufreq: cpufreq_online: CPU4: Running at unlisted initial freque ncy: 2008000 KHz, changing to: 2035200 KHz [ 6.557137] cpufreq: cpufreq_online: CPU8: Running at unlisted initial freque ncy: 2009000 KHz, changing to: 2035200 KHz [ 6.563537] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator [ 6.565960] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 6.572175] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges: [ 6.575965] mmc0: CQHCI version 5.10 [ 6.578739] tegra194-pcie 14100000.pcie: IO 0x0030100000..0x00301fffff -> 0x0030100000 [ 6.580893] irq: IRQ290: trimming hierarchy from :pmc@c360000 [ 6.580928] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 290 [ 6.602621] tegra194-pcie 14100000.pcie: MEM 0x20a8000000..0x20afffffff -> 0x0040000000 [ 6.610099] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADM A 64-bit [ 6.611106] tegra194-pcie 14100000.pcie: MEM 0x2080000000..0x20a7ffffff -> 0x2080000000 [ 6.714091] mmc0: Command Queue Engine enabled [ 6.714221] mmc0: periodic cache flush enabled [ 6.714343] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.714838] mmcblk0: mmc0:0001 G1M15M 59.3 GiB [ 6.715127] mmcblk0rpmb: mmc0:0001 G1M15M partition 3 4.00 MiB, chardev (510: 0) [ 6.717939] usb 1-3: new full-speed USB device number 2 using tegra-xusb [ 6.718438] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 6.733935] tegra194-pcie 14100000.pcie: Link up [ 6.736109] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00 [ 6.736306] pci_bus 0001:00: root bus resource [bus 00-ff] [ 6.736459] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus addr ess [0x30100000-0x301fffff]) [ 6.736748] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff ] (bus address [0x40000000-0x47ffffff]) [ 6.737054] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref] [ 6.737318] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400 [ 6.737600] pci 0001:00:00.0: PME# supported from D0 D3hot [ 6.740845] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000 [ 6.741126] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 6.741424] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit] [ 6.742374] pci 0001:01:00.0: supports D1 D2 [ 6.745942] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 6.755763] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff ] [ 6.760030] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 6.766330] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit] [ 6.774096] pci 0001:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 6.780174] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 6.785408] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 6.791707] pci 0001:00:00.0: bridge window [mem 0x20a8000000-0x20a80fffff] [ 6.799063] pci 0001:00:00.0: Max Payload Size set to 128/ 256 (was 256), M ax Read Rq 512 [ 6.807588] pci 0001:01:00.0: Max Payload Size set to 128/ 128 (was 128), M ax Read Rq 512 [ 6.816060] pcieport 0001:00:00.0: Adding to iommu group 9 [ 6.821345] pcieport 0001:00:00.0: PME: Signaling with IRQ 50 [ 6.827088] pcieport 0001:00:00.0: AER: enabled with IRQ 50 [ 6.833303] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator [ 6.839783] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 6.845790] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 6.854276] tegra194-pcie 14160000.pcie: MEM 0x2428000000..0x242fffffff -> 0x0040000000 [ 6.862758] tegra194-pcie 14160000.pcie: MEM 0x2140000000..0x2427ffffff -> 0x2140000000 [ 6.875005] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcd Device= 0.00 [ 6.879470] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.886642] usb 1-3: Product: Bluetooth Radio [ 6.891103] usb 1-3: Manufacturer: Realtek [ 6.895303] usb 1-3: SerialNumber: 00e04c000001 [ 6.998992] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra -xusb [ 7.038390] usb 2-3: New USB device found, idVendor=0bda, idProduct=0420, bcd Device= 1.40 [ 7.038626] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.038827] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.038958] usb 2-3: Manufacturer: Generic [ 7.051310] hub 2-3:1.0: USB hub found [ 7.053967] hub 2-3:1.0: 4 ports detected [ 7.153933] usb 1-4: new high-speed USB device number 3 using tegra-xusb [ 7.321541] usb 1-4: New USB device found, idVendor=0bda, idProduct=5420, bcd Device= 1.40 [ 7.321781] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.321996] usb 1-4: Product: 4-Port USB 2.0 Hub [ 7.322120] usb 1-4: Manufacturer: Generic [ 7.323446] hub 1-4:1.0: USB hub found [ 7.324608] hub 1-4:1.0: 4 ports detected [ 7.979398] tegra194-pcie 14160000.pcie: Phy link never came up [ 7.979610] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 7.979807] pci_bus 0004:00: root bus resource [bus 00-ff] [ 7.979959] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus a ddress [0x36100000-0x361fffff]) [ 7.980237] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff ] (bus address [0x40000000-0x47ffffff]) [ 7.980533] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref] [ 7.980811] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400 [ 7.981086] pci 0004:00:00.0: PME# supported from D0 D3hot [ 7.986476] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 7.986649] pci 0004:00:00.0: Max Payload Size set to 256/ 256 (was 256), M ax Read Rq 512 [ 7.987093] pcieport 0004:00:00.0: Adding to iommu group 10 [ 7.987401] pcieport 0004:00:00.0: PME: Signaling with IRQ 52 [ 7.987784] pcieport 0004:00:00.0: AER: enabled with IRQ 52 [ 7.988116] pci_bus 0004:01: busn_res: [bus 01-ff] is released [ 7.988360] pci 0004:00:00.0: Removing from iommu group 10 [ 7.988535] pci_bus 0004:00: busn_res: [bus 00-ff] is released [ 7.995268] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 8.000333] vdd-3v3-pcie: supplied by vdd-3v3-sys [ 8.004954] avdd-cam-2v8: supplied by vdd-3v3-sys [ 8.009591] vdd-dp: supplied by vdd-3v3-sys [ 8.013821] vdd-3v3-sd: supplied by vdd-3v3-sys [ 8.020500] tegra194-isp5 14800000.isp: initialized [ 8.026931] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized [ 8.029625] (NULL device *): fops function table already registered [ 8.037381] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized [ 8.042448] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 8.042852] tegra194-pcie 141a0000.pcie: Using GICv2m MSI allocator [ 8.057388] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 290 [ 8.159296] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 8.159512] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 8.159752] tegra194-pcie 141a0000.pcie: MEM 0x2b28000000..0x2b2fffffff -> 0x0040000000 [ 8.159989] tegra194-pcie 141a0000.pcie: MEM 0x2740000000..0x2b27ffffff -> 0x2740000000 [ 9.122338] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADM A 64-bit [ 9.267382] tegra194-pcie 141a0000.pcie: Phy link never came up [ 9.267599] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 9.267785] pci_bus 0005:00: root bus resource [bus 00-ff] [ 9.267943] pci_bus 0005:00: root bus resource [io 0x200000-0x2fffff] (bus a ddress [0x3a100000-0x3a1fffff]) [ 9.268222] pci_bus 0005:00: root bus resource [mem 0x2b28000000-0x2b2fffffff ] (bus address [0x40000000-0x47ffffff]) [ 9.268514] pci_bus 0005:00: root bus resource [mem 0x2740000000-0x2b27ffffff pref] [ 9.268755] pci 0005:00:00.0: [10de:229a] type 01 class 0x060400 [ 9.269026] pci 0005:00:00.0: PME# supported from D0 D3hot [ 9.274613] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 9.274759] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), M ax Read Rq 512 [ 9.275170] pcieport 0005:00:00.0: Adding to iommu group 11 [ 9.275458] pcieport 0005:00:00.0: PME: Signaling with IRQ 54 [ 9.275978] pcieport 0005:00:00.0: AER: enabled with IRQ 54 [ 9.276397] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 9.276642] pci 0005:00:00.0: Removing from iommu group 11 [ 9.276817] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 9.283494] nvethernet 6810000.ethernet: Adding to iommu group 42 [ 9.288584] nvethernet 6810000.ethernet: failed to read skip mac reset flag, default 0 [ 9.296207] nvethernet 6810000.ethernet: failed to read MDIO address [ 9.302767] nvethernet 6810000.ethernet: setting to default DMA bit mask [ 9.309600] nvethernet 6810000.ethernet: failed to read UPHY GBE mode- defaul t to 10G [ 9.317349] nvethernet 6810000.ethernet: failed to get phy reset gpio error: -2 [ 9.329270] nvethernet 6810000.ethernet: Ethernet MAC address: 48:b0:2d:78:94 :80 [ 9.332234] nvethernet 6810000.ethernet: Macsec not enabled [ 9.337506] nvethernet 6810000.ethernet: Macsec: Reduced MTU: 1466 Max: 16383 [ 9.348763] nvethernet 6810000.ethernet: eth0 (HW ver: 31) created with 10 DM A channels [ 9.353104] irq: IRQ292: trimming hierarchy from :pmc@c360000 [ 9.358474] irq: IRQ293: trimming hierarchy from :interrupt-controller@f40000 0-1 [ 9.365887] irq: IRQ294: trimming hierarchy from :pmc@c360000 [ 9.371504] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 9.379124] tegra-se-nvhost 15810000.se: Adding to iommu group 43 [ 9.385139] tegra-se-nvhost 15810000.se: initialized [ 9.395977] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 9.396223] tegra-se-nvhost 15820000.se: Adding to iommu group 44 [ 9.402249] tegra-se-nvhost 15820000.se: initialized [ 9.408787] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 9.412916] tegra-se-nvhost 15840000.se: Adding to iommu group 45 [ 9.419344] tegra-se-nvhost 15840000.se: initialized [ 9.426486] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 9.430764] tegra_actmon d230000.actmon: in actmon_register()... [ 9.436311] tegra_actmon d230000.actmon: bwmgr_disable = 1 [ 9.442359] tegra_actmon d230000.actmon: initialization Completed for the dev ice mc_all [ 9.449911] hvc_sysfs: hypervisor is not present [ 9.485867] ALSA device list: [ 9.485961] No soundcards found. [ 9.486636] Freeing unused kernel memory: 3904K [ 9.486795] Run /init as init process [ 9.497558] Root device found: mmcblk0p1 [ 9.498153] Found dev node: /dev/mmcblk0p1 [ 9.854468] EXT4-fs (mmcblk0p1): recovery complete [ 9.872918] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. O pts: (null) [ 9.873987] Rootfs mounted over mmcblk0p1 [ 9.881790] Switching from initrd to actual rootfs [ 9.996071] systemd[1]: System time before build time, advancing clock. [ 10.030953] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+P AM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default- hierarchy=hybrid) [ 10.032005] systemd[1]: Detected architecture arm64. [ 10.077182] systemd[1]: No hostname configured. [ 10.077327] systemd[1]: Set hostname to . [ 10.254080] systemd[1]: Set up automount Arbitrary Executable File Formats Fi le System Automount Point. [ 10.254548] systemd[1]: Reached target Slices. [ 10.254745] systemd[1]: Reached target Swap. [ 10.255112] systemd[1]: Listening on RPCbind Server Activation Socket. [ 10.255430] systemd[1]: Listening on fsck to fsckd communication Socket. [ 10.255697] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 10.256091] systemd[1]: Listening on Journal Audit Socket. [ 10.256366] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.256659] systemd[1]: Listening on Journal Socket. [ 10.256929] systemd[1]: Listening on udev Control Socket. [ 10.257164] systemd[1]: Listening on udev Kernel Socket. [ 10.257549] systemd[1]: dev-hugepages.mount: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 10.257913] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 10.259334] systemd[1]: Mounting Huge Pages File System... [ 10.260523] systemd[1]: Mounting POSIX Message Queue File System... [ 10.261814] systemd[1]: Mounting Kernel Debug File System... [ 10.267242] systemd[1]: Mounting Kernel Trace File System... [ 10.273121] systemd[1]: Starting Journal Service... [ 10.284138] systemd[1]: Starting Set the console keyboard layout... [ 10.285251] systemd[1]: Starting Create list of static device nodes for the c urrent kernel... [ 10.292824] systemd[1]: Started Nameserver information manager. [ 10.298288] systemd[1]: Reached target Network (Pre). [ 10.304198] systemd[1]: Starting Set console scheme... [ 10.309071] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 10.309126] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 10.334127] systemd[1]: Starting Load Kernel Modules... [ 10.335536] systemd[1]: Starting Remount Root and Kernel File Systems... [ 10.339416] systemd[1]: Starting udev Coldplug all Devices... [ 10.342265] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 10.350909] systemd[1]: Started Journal Service. [ 10.374856] systemd-journald[302]: Received client request to flush runtime j ournal. [ 10.386689] nvgpu: 17000000.ga10b nvgpu_nvhost_syncpt_init:135 [INF O] syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000 [ 10.386689] [ 10.851686] nvidia: loading out-of-tree module taints kernel. [ 10.939122] using random self ethernet address [ 10.939274] using random host ethernet address [ 11.008992] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.009192] Creating 1 MTD partitions on "spi6.0": [ 11.009334] 0x000000000000-0x000004000000 : "Whole_flash0" [ 11.074658] OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connecto r@0 [ 11.161075] OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connecto r@0 [ 11.161301] OF: graph: no port node found in /i2c@c240000/ucsi_ccg@8/connecto r@0 [ 11.737189] using random self ethernet address [ 11.737344] using random host ethernet address [ 38.039905] nvgpu: 17000000.ga10b ga10b_fuse_is_opt_ecc_enable:76 [ERR ] OPT_ECC_EN fuse not set ▒▒NVRM gpuInitInstLocOverrides_PHYSICAL: Ignoring regkeys to place BAR PTE/PDE i n SYSMEM NVRM RmInitNvVbios: Failed to find nvidia,tegra234-display compatible dt node NVRM nvAssertFailed: Assertion failed: 0 @ g_disp_nvoc.h:7034 NVRM dispState InitLockedHal_v02_01: Relocation of VGA display memory isn't supported. Continui ng anyway... NVRM sorDetermineCapabilities_v02_05: Sor number = 0 is capable of a ll protocols in crossbar, HW should support this! NVRM sorDetermineCapabilities_v 02_05: bp @ src/physical/gpu/disp/arch/v02/sor_0205.c:87 NVRM sorDetermineCapabil ities_v02_05: Sor number = 1 is capable of all protocols in crossbar, HW should support this! NVRM sorDetermineCapabilities_v02_05: bp @ src/physical/gpu/disp/ar ch/v02/sor_0205.c:87 NVRM osTegraSocGpioSetPinInterrupt: Failed to setup gpio pin irq type NVRM osTegraSocGpioSetPinInterrupt: Failed to setup gpio pin irq type NV RM nvAssertFailedNoLog: Assertion failed: pEntry != NULL @ gpu.c:865 NVRM dce_rm_ handle_rpc_gsp_rm_control: rmctrl failed: cmd 0x2080013f ret_code 0x56 NVRM dce_r m_handle_rpc_gsp_rm_control: rmctrl failed: cmd 0x2080017e ret_code 0x56 NVRM dce _rm_handle_rpc_gsp_rm_control: rmctrl failed: cmd 0x2080014a ret_code 0x56 NVRM d ispEnableInterrupts_v04_02: dispEnableInterrupts_v04_02 NVRM dispEnableInterrupts _v04_02: dispEnableInterrupts_v04_02 NVRM dispEnableInterrupts_v04_02: dispEnable Interrupts_v04_02 NVRM dispEnableInterrupts_v04_02: dispEnableInterrupts_v04_02 NV RM dispEnableInterrupts_v04_02: dispEnableInterrupts_v04_02 NVRM dispEnableInterr upts_v04_02: dispEnableInterrupts_v04_02 NVRM dispEnableInterrupts_v04_02: dispEn ableInterrupts_v04_02 NVRM dispEnableInterrupts_v04_02: dispEnableInterrupts_v04_ 02 NVRM dispEnableInterrupts_v04_02: dispEnableInterrupts_v04_02 NVRM dispEnableIn terrupts_v04_02: dispEnableInterrupts_v04_02 NVRM dispEnableInterrupts_v04_02: di spEnableInterrupts_v04_02 addr:0xf0000 AUXSTAT timeout 0x10000100 timeOutRetries= 2 addr:0x0 AUXSTAT timeout 0x10000100 timeOutRetries=2 addr:0x600 AUXSTAT 0x10000 100 timeOutRetries=2 addr:0x600 AUXSTAT 0x10000100 timeOutRetries=2 addr:0x600 AU XSTAT 0x10000100 timeOutRetries=2 addr:0x0 zero size returned for bytes read, fa iling the aux transaction NVRM dce_rm_handle_rpc_gsp_rm_control: rmctrl failed: c md 0x731341 ret_code 0x25 NVRM dce_rm_handle_rpc_gsp_rm_control: rmctrl failed: c md 0x730190 ret_code 0x56 NVRM dispHandleSupervisor_v02_01: Disp Supervisor Inter rupt 1 on GPU 0 (bar0 = 0x0) NVRM nvAssertFailedNoLog: Assertion failed: !pGpu->g etProperty(pGpu, PDB_PROP_GPU_VGA_ENABLED) @ disp_interrupt_nv50.c:1902 NVRM nvAs sertFailedNoLog: Assertion failed: !pGpu->getProperty(pGpu, PDB_PROP_GPU_VGA_ENA BLED) @ disp_interrupt_nv50.c:1975 NVRM dispHandleSupervisor_v02_01: Disp Supervi sor Interrupt 2 on GPU 0 (bar0 = 0x0) NVRM dispHandleSupervisor_v02_01: Disp Supe rvisor Interrupt 3 on GPU 0 (bar0 = 0x0) NVRM nvAssertFailedNoLog: Assertion fail ed: !pGpu->getProperty(pGpu, PDB_PROP_GPU_VGA_ENABLED) @ disp_interrupt_0300.c:3 375 ▒▒[ 40.943447] Please complete system configuration setup on the serial por t provided by Jetson's USB device mode connection. e.g. /dev/ttyACMx where x can 0, 1, 2 etc. ▒▒NVRM dispEnableInterrupts_v04_02: dispEnableInterrupts_v04_02 NVRM dispEnableIn terrupts_v04_02: dispEnableInterrupts_v04_02 NVRM dispEnableInterrupts_v04_02: di spEnableInterrupts_v04_02 NVRM dispEnableInterrupts_v04_02: dispEnableInterrupts_ v04_02 NVRM dispEnableInterrupts_v04_02: dispEnableInterrupts_v04_02 NVRM dispEnab leInterrupts_v04_02: dispEnableInterrupts_v04_02 NVRM dispEnableInterrupts_v04_02 : dispEnableInterrupts_v04_02 NVRM dispEnableInterrupts_v04_02: dispEnableInterru pts_v04_02 NVRM dispEnableInterrupts_v04_02: dispEnableInterrupts_v04_02 NVRM disp EnableInterrupts_v04_02: dispEnableInterrupts_v04_02 NVRM dispEnableInterrupts_v0 4_02: dispEnableInterrupts_v04_02 addr:0x0 zero size returned for bytes read, fai ling the aux transaction NVRM dce_rm_handle_rpc_gsp_rm_control: rmctrl failed: cm d 0x731341 ret_code 0x25 NVRM dispHandleSupervisor_v02_01: Disp Supervisor Interr upt 1 on GPU 0 (bar0 = 0x0) NVRM nvAssertFailedNoLog: Assertion failed: !pGpu->ge tProperty(pGpu, PDB_PROP_GPU_VGA_ENABLED) @ disp_interrupt_nv50.c:1902 NVRM nvAss ertFailedNoLog: Assertion failed: !pGpu->getProperty(pGpu, PDB_PROP_GPU_VGA_ENAB LED) @ disp_interrupt_nv50.c:1975 NVRM dispHandleSupervisor_v02_01: Disp Supervis or Interrupt 2 on GPU 0 (bar0 = 0x0) NVRM dispHandleSupervisor_v02_01: Disp Super visor Interrupt 3 on GPU 0 (bar0 = 0x0) NVRM nvAssertFailedNoLog: Assertion faile d: !pGpu->getProperty(pGpu, PDB_PROP_GPU_VGA_ENABLED) @ disp_interrupt_0300.c:33 75 NVRM dce_rm_handle_rpc_dce_rm_init: DCE_RM_INIT: RmShutdownAdapter [NvPort] *** ********************************************** NvPort memory tracking information for all allocations: NULL allocator for tracker 4006197c: [NvPort] ************************************************* NvPort memory tracking information for allocator 400619a4: ACTIVE: 0 allocations, 0 bytes allocated (0 useful, 0 meta) TOTAL: 12 allocations, 0 bytes allocated (0 useful, 0 meta) PEAK: 12 allocations, 0 bytes allocated (0 useful, 0 meta) [NvPort] ************************************************* NvPort memory tracking information for allocator 400619b8: ACTIVE: 4 allocations, 0 bytes allocated (0 useful, 0 meta) TOTAL: 309 allocations, 0 bytes allocated (0 useful, 0 meta) PEAK: 202 allocations, 0 bytes allocated (0 useful, 0 meta) [NvPort] ************************************************* Allocator 400619b8 released with memory allocations [NvPort] ************************************************* NvPort memory tracking information for allocator 400619b8: ACTIVE: 4 allocations, 0 bytes allocated (0 useful, 0 meta) TOTAL: 309 allocations, 0 bytes allocated (0 useful, 0 meta) PEAK: 202 allocations, 0 bytes allocated (0 useful, 0 meta) [NvPort] ************************************************* RmDeInit completed successfully