[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.140-tegra (lvjun@ubuntu-linux) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #3 SMP PREEMPT Thu Oct 15 15:28:07 CST 2020 [ 0.000000] Boot CPU: AArch64 Processor [4e0f0040] [ 0.000000] OF: fdt:memory scan node memory, reg size 48, [ 0.000000] OF: fdt: - 80000000 , 2c000000 [ 0.000000] OF: fdt: - ac200000 , 44600000 [ 0.000000] OF: fdt: - 100000000 , 180000000 [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] bootconsole [tegra_comb_uart0] enabled [ 0.000000] Found tegra_fbmem: 00800000@a069c000 [ 0.000000] Found lut_mem: 00002008@a0696000 [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node grid-of-semaphores, compatible id nvidia,gosmem [ 0.000000] cma: Reserved 64 MiB at 0x00000000c2000000 [ 0.000000] On node 0 totalpages: 2030589 [ 0.000000] DMA zone: 7152 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 457725 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 25 pages/cpu @ffffffc1ffd01000 s61656 r8192 d32552 u102400 [ 0.000000] pcpu-alloc: s61656 r8192 d32552 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998861 [ 0.000000] Kernel command line: console=ttyTCU0,115200 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 gpt tegra_fbmem=0x800000@0xa069c000 lut_mem=0x2008@0xa0696000 usbcore.old_scheme_first=1 tegraid=19.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.4.2 vpr_resize sdhci_tegra.en_boot_part_access=1 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 29188(89%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Memory: 7182100K/8122356K available (15294K kernel code, 2942K rwdata, 6756K rodata, 8576K init, 609K bss, 186592K reserved, 753664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f70000 ( 15296 KB) [ 0.000000] .rodata : 0xffffff8008f70000 - 0xffffff8009610000 ( 6784 KB) [ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e70000 ( 8576 KB) [ 0.000000] .data : 0xffffff8009e70000 - 0xffffff800a14f808 ( 2943 KB) [ 0.000000] .bss : 0xffffff800a14f808 - 0xffffff800a1e7fbc ( 610 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf08000000 ( 128 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc200000000 ( 8192 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000599] Console: colour dummy device 80x25 [ 0.000610] console [tty0] enabled [ 0.000617] bootconsole [tegra_comb_uart0] disabled [ 0.000635] kmemleak: Kernel memory leak detector disabled [ 0.000654] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.000670] pid_max: default: 32768 minimum: 301 [ 0.001729] Security Framework initialized [ 0.002297] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.002307] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.003959] ftrace: allocating 47213 entries in 185 pages [ 0.396218] sched-energy: Sched-energy-costs installed from DT [ 0.396237] ASID allocator initialised with 65536 entries [ 0.431852] tegra-id: chipid=21917. [ 0.431865] tegra-id: opt_subrevision=1. [ 0.431891] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.431924] DTS File Name: /home/lvjun/workspace/nx_emmc/Linux_for_Tegra/source/public/ker/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.431935] DTB Build time: Oct 15 2020 15:25:59 [ 0.479823] CPU1: Booted secondary processor [4e0f0040] [ 0.511919] CPU2: Booted secondary processor [4e0f0040] [ 0.544021] CPU3: Booted secondary processor [4e0f0040] [ 0.576275] CPU4: Booted secondary processor [4e0f0040] [ 0.608356] CPU5: Booted secondary processor [4e0f0040] [ 0.608572] Brought up 6 CPUs [ 0.608582] SMP: Total of 6 processors activated. [ 0.608591] CPU features: detected feature: Privileged Access Never [ 0.608597] CPU features: detected feature: LSE atomic instructions [ 0.608603] CPU features: detected feature: User Access Override [ 0.608609] CPU features: detected feature: 32-bit EL0 Support [ 0.610031] CPU: All CPU(s) started at EL2 [ 0.610095] alternatives: patching kernel code [ 0.616493] devtmpfs: initialized [ 0.654388] Initilizing CustomIPI irq domain [ 0.654668] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.654683] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.667084] pinctrl core: initialized pinctrl subsystem [ 0.667283] OS set in device tree is not L4T. [ 0.667584] regulator-dummy: no parameters [ 0.667875] Initializing plugin-manager [ 0.667922] Plugin module not found [ 0.667958] Plugin-manager status disabled [ 0.669176] NET: Registered protocol family 16 [ 0.670330] pstore: using zlib compression [ 0.670350] console [pstore-1] enabled [ 0.670355] pstore: Registered ramoops as persistent store backend [ 0.670363] ramoops: attached 0x200000@0xf0600000, ecc: 0/0 [ 0.686967] cpuidle: using governor menu [ 0.688107] bpmp: waiting for handshake [ 0.688115] bpmp: handshake completed [ 0.688133] bpmp: synchronizing channels [ 0.688141] bpmp: channels synchronized [ 0.688147] bpmp: mail init ok [ 0.690692] t19x-arm-smmu 12000000.iommu: found 3 SMMUs and ISO SMMU id is 2 [ 0.690888] t19x-arm-smmu 12000000.iommu: probing hardware configuration... [ 0.690897] t19x-arm-smmu 12000000.iommu: SMMUv2 with: [ 0.690965] t19x-arm-smmu 12000000.iommu: stage 1 translation [ 0.690971] t19x-arm-smmu 12000000.iommu: stage 2 translation [ 0.690976] t19x-arm-smmu 12000000.iommu: nested translation [ 0.690985] t19x-arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80 [ 0.691014] t19x-arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)! [ 0.691021] t19x-arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 0.691028] t19x-arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA [ 0.691034] t19x-arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA [ 0.693924] vdso: 2 pages (1 code @ ffffff8008f77000, 1 data @ ffffff8009e74000) [ 0.693949] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.696429] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.697525] tegra_aon_clk_init: ok [ 0.697533] Registering BPMP clocks... [ 0.697628] tegra_bpmp_clk_init: clock init ok (400 clks) [ 0.698179] Serial: AMBA PL011 UART driver [ 0.698307] tegra_powergate_init: DONE [ 0.698357] DTS File Name: /home/lvjun/workspace/nx_emmc/Linux_for_Tegra/source/public/ker/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts [ 0.698369] DTB Build time: Oct 15 2020 15:25:59 [ 0.701169] Tegra reboot handler registered. [ 0.708985] iommu: Adding device 14160000.pcie to group 0 [ 0.709611] iommu: Adding device 141a0000.pcie to group 1 [ 0.710912] iommu: Adding device 2490000.ether_qos to group 2 [ 0.711460] iommu: Adding device 3100000.serial to group 3 [ 0.711907] iommu: Adding device 3110000.serial to group 4 [ 0.712325] iommu: Adding device 3140000.serial to group 5 [ 0.712915] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.713355] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0 [ 0.713388] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET [ 0.713397] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0 [ 0.713405] tegra-pmc: ### PMC reset status reg: 0x0 [ 0.713457] tegra-pmc: PMC Prod config success [ 0.713681] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.713694] tegra-pmc c360000.pmc: IO padctrl driver initialized [ 0.714012] iommu: Adding device 3400000.sdhci to group 6 [ 0.714517] iommu: Adding device 3210000.spi to group 7 [ 0.714895] iommu: Adding device 3230000.spi to group 8 [ 0.715315] iommu: Adding device 3270000.spi to group 9 [ 0.716438] iommu: Adding device 3160000.i2c to group 10 [ 0.716991] iommu: Adding device c240000.i2c to group 11 [ 0.717465] iommu: Adding device 3180000.i2c to group 12 [ 0.717895] iommu: Adding device 3190000.i2c to group 13 [ 0.718568] iommu: Adding device 31b0000.i2c to group 14 [ 0.719208] iommu: Adding device 31c0000.i2c to group 15 [ 0.719675] iommu: Adding device c250000.i2c to group 16 [ 0.720080] iommu: Adding device 31e0000.i2c to group 17 [ 0.720715] iommu: Adding device sound to group 18 [ 0.721249] iommu: Adding device 3510000.hda to group 19 [ 0.721813] iommu: Adding device bc00000.rtcpu to group 20 [ 0.723699] iommu: Adding device 13e10000.host1x to group 21 [ 0.724141] iommu: Adding device 13e10000.host1x:ctx0 to group 22 [ 0.724488] iommu: Adding device 13e10000.host1x:ctx1 to group 23 [ 0.724878] iommu: Adding device 13e10000.host1x:ctx2 to group 24 [ 0.725223] iommu: Adding device 13e10000.host1x:ctx3 to group 25 [ 0.725595] iommu: Adding device 13e10000.host1x:ctx4 to group 26 [ 0.726029] iommu: Adding device 13e10000.host1x:ctx5 to group 27 [ 0.726703] iommu: Adding device 13e10000.host1x:ctx6 to group 28 [ 0.727180] iommu: Adding device 13e10000.host1x:ctx7 to group 29 [ 0.727713] iommu: Adding device 15340000.vic to group 30 [ 0.728107] iommu: Adding device 15380000.nvjpg to group 31 [ 0.728383] iommu: Adding device 15500000.tsec to group 32 [ 0.728659] iommu: Adding device 15100000.tsecb to group 33 [ 0.728955] iommu: Adding device 15480000.nvdec to group 34 [ 0.729227] iommu: Adding device 15140000.nvdec1 to group 35 [ 0.729498] iommu: Adding device 154c0000.nvenc to group 36 [ 0.729838] iommu: Adding device 15a80000.nvenc1 to group 37 [ 0.730257] iommu: Adding device 15880000.nvdla0 to group 38 [ 0.730656] iommu: Adding device 158c0000.nvdla1 to group 39 [ 0.731300] iommu: Adding device 15200000.nvdisplay to group 40 [ 0.731469] platform 15200000.nvdisplay: IOVA linear map 0x00000000a069c000(800000) [ 0.731479] platform 15200000.nvdisplay: IOVA linear map 0x00000000a0696000(3000) [ 0.736076] platform 15200000.nvdisplay: IOVA linear map 0x00000000c6000000(2a000000) [ 0.736162] t19x-arm-smmu: Adding 15200000.nvdisplay to ISO SMMU client [ 0.736875] iommu: Adding device 15210000.nvdisplay to group 41 [ 0.736928] t19x-arm-smmu: Adding 15210000.nvdisplay to ISO SMMU client [ 0.738716] iommu: Adding device 15c10000.vi to group 42 [ 0.738869] t19x-arm-smmu: Adding 15c10000.vi to ISO SMMU client [ 0.739245] iommu: Adding device 14800000.isp to group 43 [ 0.740297] iommu: Adding device 16000000.pva0 to group 44 [ 0.740797] iommu: Adding device 16800000.pva1 to group 45 [ 0.741184] iommu: Adding device 15810000.se to group 46 [ 0.741655] iommu: Adding device 15820000.se to group 47 [ 0.741945] iommu: Adding device 15830000.se to group 48 [ 0.742227] iommu: Adding device 15840000.se to group 49 [ 0.742495] iommu: Adding device c1a0000.aon to group 50 [ 0.744133] iommu: Adding device d000000.bpmp to group 51 [ 0.744480] bpmp: ping status is 0 [ 0.744605] bpmp d000000.bpmp: firmware tag is 57f8a77779f848bf2ecf21dabee5645f [ 0.747749] bpmp d000000.bpmp: probe ok [ 0.749383] tegra-reset 0.bpmp_reset: registered 190 resets. [ 0.749859] iommu: Adding device smmu_test to group 52 [ 0.751241] mc: mapped MMIO address: 0xffffff800a5c0000 -> 0x2c10000 [ 0.751287] mc: mapped MMIO address: 0xffffff800a5e0000 -> 0x2c20000 [ 0.751319] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c30000 [ 0.751343] mc: mapped MMIO address: 0xffffff800a7d0000 -> 0x2c40000 [ 0.751395] mc: mapped MMIO address: 0xffffff800b010000 -> 0x2c50000 [ 0.751418] mc: mapped MMIO address: 0xffffff800b030000 -> 0x2b80000 [ 0.751439] mc: mapped MMIO address: 0xffffff800b050000 -> 0x2b90000 [ 0.751460] mc: mapped MMIO address: 0xffffff800b070000 -> 0x2ba0000 [ 0.751484] mc: mapped MMIO address: 0xffffff800b090000 -> 0x2bb0000 [ 0.751506] mc: mapped MMIO address: 0xffffff800b0b0000 -> 0x1700000 [ 0.751527] mc: mapped MMIO address: 0xffffff800b0d0000 -> 0x1710000 [ 0.751549] mc: mapped MMIO address: 0xffffff800b0f0000 -> 0x1720000 [ 0.751569] mc: mapped MMIO address: 0xffffff800b110000 -> 0x1730000 [ 0.751589] mc: mapped MMIO address: 0xffffff800b130000 -> 0x1740000 [ 0.751610] mc: mapped MMIO address: 0xffffff800b150000 -> 0x1750000 [ 0.751631] mc: mapped MMIO address: 0xffffff800b170000 -> 0x1760000 [ 0.751664] mc: mapped MMIO address: 0xffffff800b190000 -> 0x1770000 [ 0.751743] mc-err: mcerr ops are set to t19x [ 0.757796] iommu: Adding device 2600000.dma to group 53 [ 0.763293] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 224 lines on the chip [ 0.764524] GPIO line 339 (wifi-enable) hogged as output/high [ 0.764568] GPIO line 412 (camera-control-output-low) hogged as output/low [ 0.764604] GPIO line 413 (camera-control-output-low) hogged as output/low [ 0.764858] gpiochip_setup_dev: registered GPIOs 288 to 511 on device: gpiochip0 (tegra-gpio) [ 0.771710] gpio gpiochip1: gpio-line-names specifies 21 line names but there are 40 lines on the chip [ 0.771802] GPIO line 253 (pex-refclk-sel-low) hogged as output/low [ 0.771838] GPIO line 266 (w-disable1) hogged as output/high [ 0.771871] GPIO line 264 (w-disable2) hogged as output/high [ 0.772164] gpiochip_setup_dev: registered GPIOs 248 to 287 on device: gpiochip1 (tegra-gpio-aon) [ 0.774240] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3 [ 0.774251] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256 [ 0.774952] iommu: Adding device 3550000.xudc to group 54 [ 0.775651] iommu: Adding device 3610000.xhci to group 55 [ 0.777757] arm64_ras arm64_ras: probed [ 0.778114] ras_fhi_enable: FHI 468 enabled on CPU0 [ 0.778165] ras_fhi_enable: FHI 469 enabled on CPU1 [ 0.778244] ras_fhi_enable: FHI 470 enabled on CPU2 [ 0.778321] ras_fhi_enable: FHI 471 enabled on CPU3 [ 0.778418] ras_fhi_enable: FHI 472 enabled on CPU4 [ 0.778490] ras_fhi_enable: FHI 473 enabled on CPU5 [ 0.778675] carmel_ras_enable: RAS enabled on cpu0 [ 0.778851] carmel_ras_enable: RAS enabled on cpu1 [ 0.779076] carmel_ras_enable: RAS enabled on cpu2 [ 0.779309] carmel_ras_enable: RAS enabled on cpu3 [ 0.779542] carmel_ras_enable: RAS enabled on cpu4 [ 0.779740] carmel_ras_enable: RAS enabled on cpu5 [ 0.779825] carmel_ras carmel_ras: probed [ 0.781151] tegra-cbb 2300000.cbb-noc: noc_secure_irq = 477, noc_nonsecure_irq = 476> [ 0.781647] tegra-cbb c600000.aon-noc: noc_secure_irq = 479, noc_nonsecure_irq = 478> [ 0.782698] tegra-cbb d600000.bpmp-noc: noc_secure_irq = 481, noc_nonsecure_irq = 480> [ 0.783833] tegra-cbb be00000.rce-noc: noc_secure_irq = 483, noc_nonsecure_irq = 482> [ 0.784949] tegra-cbb b600000.sce-noc: noc_secure_irq = 485, noc_nonsecure_irq = 484> [ 0.785310] tegra-cbb 14040000.cv-noc: defer probe as CV-NOC not probed yet [ 0.786625] vdd-ac-bat: 5000 mV [ 0.787051] vdd-sdmmc1-sw: 3300 mV [ 0.787380] vdd-1v8-sd: 1800 mV [ 0.787693] vdd-3v3-cvb: 3300 mV [ 0.788047] vdd-1v8-cvb: 1800 mV [ 0.788464] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.788524] vdd-epb-1v0: 1000 mV [ 0.788891] avdd-cam-2v8: 2800 mV [ 0.789201] vdd-fan: 5000 mV [ 0.789539] vdd-hdmi-5v0: 5000 mV [ 0.789835] vdd_sys_en: 1200 mV [ 0.825241] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.830325] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.830656] SCSI subsystem initialized [ 0.830948] libata version 3.00 loaded. [ 0.831183] usbcore: registered new interface driver usbfs [ 0.831244] usbcore: registered new interface driver hub [ 0.831339] usbcore: registered new device driver usb [ 0.831698] tegra-i2c 3160000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.841548] tegra-i2c 31e0000.i2c: could not find pctldev for node /host1x/dpaux@155F0000/pinmux@0, deferring probe [ 0.844181] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 0.852777] vdd-1v0: at 1000 mV [ 0.860193] vdd-1v8-hs: at 1800 mV [ 0.868217] vdd-1v8-ls: at 1800 mV [ 0.876232] vdd-1v8-ao: at 1800 mV [ 0.884270] vddio-ddr-1v1: at 1100 mV [ 0.892087] vdd-rtc: at 800 mV [ 0.893364] spmic-ldo1: at 2375 mV [ 0.904093] vdd-ao-3v3: at 3300 mV [ 0.916142] vddio-emmc-3v3: at 3300 mV [ 0.917437] spmic-ldo4: at 1587 mV [ 0.928172] vdd-usb-3v3: at 3300 mV [ 0.940217] vddio-sdmmc1-3v3: at 3300 mV [ 0.944894] vdd-csi-1v2: at 1200 mV [ 0.946398] spmic-ldo8: at 1800 mV [ 0.951235] GPIO line 246 (gpio_default) hogged as output/high [ 0.952709] GPIO line 247 (gpio_default) hogged as output/high [ 0.953075] gpiochip_setup_dev: registered GPIOs 240 to 247 on device: gpiochip2 (max77620-gpio) [ 0.953434] max77620 4-003c: max77620 probe successful [ 0.953987] media: Linux media interface: v0.10 [ 0.954030] Linux video capture interface: v2.00 [ 0.955440] pps_core: LinuxPPS API ver. 1 registered [ 0.955448] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.955472] PTP clock support registered [ 0.955741] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.956050] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.956085] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.958526] trusty trusty: trusty version: Built: 21:16:17 Jun 25 2020 [ 0.958586] trusty trusty: selected api version: 3 (requested 3) [ 0.959877] Advanced Linux Sound Architecture Driver Initialized. [ 0.960420] Bluetooth: Core ver 2.22 [ 0.960514] NET: Registered protocol family 31 [ 0.960520] Bluetooth: HCI device and connection manager initialized [ 0.960534] Bluetooth: HCI socket layer initialized [ 0.960542] Bluetooth: L2CAP socket layer initialized [ 0.960571] Bluetooth: SCO socket layer initialized [ 0.963687] camchar: rtcpu character device driver loaded [ 0.964266] gpio tegra-gpio wake61 for gpio=201(Z:1) [ 0.964410] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0 [ 0.965385] clocksource: Switched to clocksource arch_sys_counter [ 1.015139] VFS: Disk quotas dquot_6.6.0 [ 1.015219] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.015547] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 1.016900] tegra-carveouts tegra-carveouts: assigned reserved memory node grid-of-semaphores [ 1.016946] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000 [ 1.017167] cma: enabled page replacement for spfn=c6000, epfn=f0000 [ 1.017176] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 1.017190] nvmap: nvmap_select_cache_ops() nvmap cache ops set to scf [ 1.017198] nvmap_page_pool_init: Total RAM pages: 1983941 [ 1.017204] nvmap_page_pool_init: nvmap page pool size: 247992 pages (968 MB) [ 1.017369] nvmap_background_zero_thread: PP zeroing thread starting. [ 1.017882] misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB) [ 1.020801] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 1.033558] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm [ 1.033743] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm [ 1.033913] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type AUX-therm [ 1.034081] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type AO-therm [ 1.034248] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 1.035416] la/ptsa driver initialized. [ 1.035729] NET: Registered protocol family 2 [ 1.036559] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.036845] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.037495] TCP: Hash tables configured (established 65536 bind 65536) [ 1.037552] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.037668] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.038107] NET: Registered protocol family 1 [ 1.038676] RPC: Registered named UNIX socket transport module. [ 1.038683] RPC: Registered udp transport module. [ 1.038691] RPC: Registered tcp transport module. [ 1.038696] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.038706] PCI: CLS 0 bytes, default 64 [ 1.038909] Trying to unpack rootfs image as initramfs... [ 1.227688] Freeing initrd memory: 5432K [ 1.248598] host1x 13e10000.host1x: initialized [ 1.250288] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.254420] audit: initializing netlink subsys (disabled) [ 1.254460] audit: type=2000 audit(0.880:1): initialized [ 1.255210] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.264327] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.265515] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.266149] 9p: Installing v9fs 9p2000 file system support [ 1.271206] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.271376] io scheduler noop registered [ 1.271641] io scheduler cfq registered (default) [ 1.273389] random: fast init done [ 1.275170] gic 2a41000.agic-controller: GIC IRQ controller registered [ 1.308331] iommu: Adding device 2993000.adsp to group 56 [ 1.422226] iommu: Adding device aconnect@2a41000:adsp_audio to group 57 [ 1.423240] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 1.436510] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.436956] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.437638] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.438028] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.438411] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.441705] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.441950] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 1.444742] tsec 15500000.tsec: initialized [ 1.446193] tsec 15100000.tsecb: initialized [ 1.450042] nvdec 15480000.nvdec: initialized [ 1.452694] nvdec 15140000.nvdec1: initialized [ 1.458810] falcon 15340000.vic: initialized [ 1.460843] falcon 15380000.nvjpg: initialized [ 1.462706] falcon 154c0000.nvenc: initialized [ 1.464642] falcon 15a80000.nvenc1: initialized [ 1.468658] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56) [ 1.470094] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57) [ 1.471488] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58) [ 1.472853] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59) [ 1.474247] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60) [ 1.475467] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61) [ 1.476663] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62) [ 1.477984] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63) [ 1.481665] t194-nvcsi 15a00000.nvcsi: initialized [ 1.487159] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 1.487572] scare-pigeon 14b00000.isp-thi: initialized [ 1.493128] pva 16000000.pva0: initialized [ 1.498709] pva 16800000.pva1: initialized [ 1.503553] nvdla 15880000.nvdla0: initialized [ 1.508354] nvdla 158c0000.nvdla1: initialized [ 1.509961] tegradccommon 15200000.dc_common: host1x channel mapped [ 1.509975] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated [ 1.510023] tegradccommon 15200000.dc_common: dma mapping done [ 1.510177] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=77 [ 1.510188] tegra_cec 3960000.tegra_cec: Unpowergate DISP: 0. [ 1.510474] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 1.510516] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 1.510781] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 1.510789] tegra_cec 3960000.tegra_cec: probed [ 1.511383] tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1 [ 1.511446] generic_infoframe_type: 0x87 [ 1.511559] tegradc 15200000.nvdisplay: DT parsed successfully [ 1.511633] tegradc 15200000.nvdisplay: Display dc.ffffff800bce0000 registered with id=0 [ 1.516583] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 7088400 KB/s [ 1.516597] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 800000000 Hz [ 1.516602] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 1.516827] tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0 [ 1.516838] tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0 [ 1.517781] tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 1.520193] tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board [ 1.520202] tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 1.523112] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels [ 1.523746] tegradc 15200000.nvdisplay: probed [ 1.523884] tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled [ 1.523942] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized [ 1.524334] kfuse 3830000.kfuse: initialized [ 1.529504] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.532322] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 47, base_baud = 0) is a TEGRA_UART [ 1.533482] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 48, base_baud = 0) is a TEGRA_UART [ 1.534440] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 49, base_baud = 0) is a TEGRA_UART [ 1.535692] console [ttyTCU0] enabled [ 1.535978] [drm] Initialized [ 1.548665] brd: module loaded [ 1.554270] loop: module loaded [ 1.554365] tegra_profiler: version: 1.141, samples/io: 48/28 [ 1.554518] tegra_profiler: auth: init [ 1.555278] THERMAL EST: found 3 subdevs [ 1.555286] THERMAL EST num_resources: 0 [ 1.555293] [THERMAL EST subdev 0] [ 1.555299] [THERMAL EST subdev 1] [ 1.555305] [THERMAL EST subdev 2] [ 1.555315] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.555654] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.555659] THERMAL EST: thz register success. [ 1.555806] THERMAL EST: end of probe, return err: 0 [ 1.556442] sd: No Scsi addr parsed to reserve index [ 1.556472] hisi_sas: driver version v1.6 [ 1.567109] qspi_mtd spi6.0: s25fs256s SSG 8 0 1000 2000000 [ 1.567119] qspi_mtd spi6.0: s25fs256s (32768 Kbytes) [ 1.567129] qspi_mtd spi6.0: mtd .name = spi6.0, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0 [ 1.567414] 1 ofpart partitions found on MTD device spi6.0 [ 1.567420] Creating 1 MTD partitions on "spi6.0": [ 1.567440] 0x000000000000-0x000002000000 : "Whole_flash0" [ 1.571039] libphy: Fixed MDIO Bus: probed [ 1.571691] tun: Universal TUN/TAP device driver, 1.6 [ 1.571696] tun: (C) 1999-2004 Max Krasnyansky [ 1.572549] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.572554] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.572594] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.572599] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.572646] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.572650] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.572697] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4 [ 1.572702] Copyright(c) 1999 - 2017 Intel Corporation. [ 1.580917] Console: switching to colour frame buffer device 240x67 [ 1.581032] tegradc 15200000.nvdisplay: fb registered [ 1.581314] gpio tegra-gpio wake63 for gpio=97(M:1) [ 1.581927] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.582006] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.584246] Parent Clock set for DC plld2 [ 1.642805] tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 1.643497] tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL. [ 1.643511] tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL. [ 1.669191] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.669198] Extcon AUX1(HDMI) enable [ 1.669646] tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor [ 1.669674] tegradc 15210000.nvdisplay: parse_dp_settings: No dp-lt-settings node [ 1.669745] tegradc 15210000.nvdisplay: DT parsed successfully [ 1.669810] tegradc 15210000.nvdisplay: Display dc.ffffff800d1e0000 registered with id=1 [ 1.669972] tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1 [ 1.669981] tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1 [ 1.678510] tegradc 15210000.nvdisplay: probed [ 1.678779] tegradc 15210000.nvdisplay: fb registered [ 1.682090] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 1.682097] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 1.682115] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 1.682151] tegradc 15210000.nvdisplay: blank - powerdown [ 1.682166] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 1.682171] Extcon DP: HPD disabled [ 1.682176] hpd: hpd_switch 0 [ 1.682181] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 1.682200] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 1.682209] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 1.800508] tegradc 15200000.nvdisplay: blank - powerdown [ 1.816817] eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 7 8e db [ 1.816933] libphy: dwc_phy: probed [ 1.819471] PPP generic driver version 2.4.2 [ 1.819825] PPP BSD Compression module registered [ 1.819830] PPP Deflate Compression module registered [ 1.819848] PPP MPPE Compression module registered [ 1.819852] NET: Registered protocol family 24 [ 1.819956] usbcore: registered new interface driver r8152 [ 1.820029] usbcore: registered new interface driver asix [ 1.820072] usbcore: registered new interface driver ax88179_178a [ 1.820099] usbcore: registered new interface driver cdc_ether [ 1.820154] usbcore: registered new interface driver net1080 [ 1.820182] usbcore: registered new interface driver rndis_host [ 1.820208] usbcore: registered new interface driver cdc_subset [ 1.820257] usbcore: registered new interface driver zaurus [ 1.820297] usbcore: registered new interface driver cdc_ncm [ 1.820528] VFIO - User Level meta-driver version: 0.3 [ 1.821609] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.821623] ehci-pci: EHCI PCI platform driver [ 1.821652] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.821660] ohci-pci: OHCI PCI platform driver [ 1.821689] ohci-platform: OHCI generic platform driver [ 1.826816] tegra-xusb 3610000.xhci: USB2 port 0 has OTG_CAP [ 1.828749] tegra-xusb 3610000.xhci: extcon 0: ffffffc1f4de6800 id [ 1.829061] usbcore: registered new interface driver uas [ 1.829122] usbcore: registered new interface driver usb-storage [ 1.829681] usbcore: registered new interface driver usbserial [ 1.829726] usbcore: registered new interface driver usbserial_generic [ 1.829750] usbserial: USB Serial support registered for generic [ 1.829779] usbcore: registered new interface driver option [ 1.829804] usbserial: USB Serial support registered for GSM modem (1-port) [ 1.831741] tegra-xusb 3610000.xhci: Firmware timestamp: 2019-07-24 05:47:34 UTC, Version: 60.06 release [ 1.831776] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.831795] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 1.832472] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x00050810 [ 1.832537] tegra-xusb 3610000.xhci: irq 463, io mem 0x03610000 [ 1.832797] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.832803] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.832807] usb usb1: Product: xHCI Host Controller [ 1.832811] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.832815] usb usb1: SerialNumber: 3610000.xhci [ 1.833258] hub 1-0:1.0: USB hub found [ 1.833415] hub 1-0:1.0: 4 ports detected [ 1.834110] tegra-xusb 3610000.xhci: xHCI Host Controller [ 1.834121] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 1.834131] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 1.834404] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.834410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.834414] usb usb2: Product: xHCI Host Controller [ 1.834418] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd [ 1.834422] usb usb2: SerialNumber: 3610000.xhci [ 1.834900] hub 2-0:1.0: USB hub found [ 1.834942] hub 2-0:1.0: 4 ports detected [ 1.835278] tegra-xudc-new 3550000.xudc: PMQOS CPU boost enabled [ 1.835357] tegra-xudc-new 3550000.xudc: device count: 1 [ 1.836272] tegra-xudc-new 3550000.xudc: vbus state: 0 [ 1.836280] tegra-xudc-new 3550000.xudc: Initialize boost_cpufreq work [ 1.836310] tegra-xudc-new 3550000.xudc: entering ELPG [ 1.836524] tegra-xudc-new 3550000.xudc: entering ELPG done [ 1.837022] mousedev: PS/2 mouse device common for all mice [ 1.837138] usbcore: registered new interface driver xpad [ 1.843164] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 1.843169] Extcon AUX1(HDMI) disable [ 1.869114] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 1.870786] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 1.898758] tegradc 15200000.nvdisplay: unblank [ 1.900284] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 1.900534] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 1.909275] Parent Clock set for DC plld2 [ 1.913940] tegradc 15200000.nvdisplay: hdmi: tmds rate:108000K prod-setting:prod_c_hdmi_54m_111m [ 1.915368] tegradc 15200000.nvdisplay: hdmi: get RGB quant from EDID. [ 1.915376] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 1.950176] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 1.950180] Extcon AUX1(HDMI) enable [ 1.963089] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.964953] Wake73 for irq=42 [ 1.966260] rtc rtc1: alarm rtc device [ 1.966273] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1 [ 1.966301] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 1.966567] i2c /dev entries driver [ 1.968891] i2c i2c-2: Added multiplexed i2c bus 9 [ 1.969414] i2c i2c-2: Added multiplexed i2c bus 10 [ 1.969421] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 1.969989] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.993745] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 1.993804] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.993875] imx219 9-0010: board setup failed [ 1.993999] imx219: probe of 9-0010 failed with error -121 [ 1.994494] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6 [ 2.017764] tegra-i2c 3180000.i2c: no acknowledge from address 0x10 [ 2.017822] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 2.017866] imx219 10-0010: board setup failed [ 2.017946] imx219: probe of 10-0010 failed with error -121 [ 2.019495] max77620-power max20024-power: Event recorder REG_NVERC : 0x40 [ 2.027310] tegra-thermal-throttle bthrot_cdev: clk:cpu max:1907200000, min:115200000 steps:24 [ 2.031519] tegra-thermal-throttle bthrot_cdev: clk:gpu max:1109250000, min:114750000 steps:10 [ 2.031547] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:0:cpu off:0 slope-adj:200 [ 2.031552] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced clk:1:gpu off:0 slope-adj:400 [ 2.031648] tegra-thermal-throttle bthrot_cdev: cdev:skin-balanced max_state:48 cutoff:0 [ 2.031701] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:0:cpu off:0 slope-adj:400 [ 2.031706] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced clk:1:gpu off:0 slope-adj:400 [ 2.031989] tegra-thermal-throttle bthrot_cdev: cdev:gpu-balanced max_state:40 cutoff:1 [ 2.032062] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:0:cpu off:0 slope-adj:200 [ 2.032067] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced clk:1:gpu off:365500000 slope-adj:300 [ 2.032443] tegra-thermal-throttle bthrot_cdev: cdev:cpu-balanced max_state:48 cutoff:0 [ 2.032516] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:0:cpu off:38400000 slope-adj:10 [ 2.032522] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced clk:1:gpu off:25500000 slope-adj:10 [ 2.032912] tegra-thermal-throttle bthrot_cdev: cdev:emergency-balanced max_state:2 cutoff:0 [ 2.032966] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:0:cpu off:0 slope-adj:400 [ 2.032972] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced clk:1:gpu off:0 slope-adj:400 [ 2.033252] tegra-thermal-throttle bthrot_cdev: cdev:aux-balanced max_state:40 cutoff:1 [ 2.033847] FAN dev name: pwm-fan [ 2.033892] FAN:gpio request success. [ 2.033900] FAN: can't find tach_gpio [ 2.033910] pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet [ 2.033941] pwm_fan_driver pwm-fan: cap state:4, cap pwm:255 [ 2.034169] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 2.034174] pwm_fan_driver pwm-fan: tach period: 1000 [ 2.034760] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 2.034766] pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2 [ 2.034771] pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2 [ 2.034776] pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2 [ 2.034780] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 2.034785] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 2.034789] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 2.034794] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 2.034799] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 2.034804] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 2.036028] device-mapper: uevent: version 1.0.3 [ 2.036525] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.040367] tegra194_cpufreq_probe: platform driver Initialization: pass [ 2.041854] cpuidle: Initializing cpuidle driver [ 2.042876] sdhci: Secure Digital Host Controller Interface driver [ 2.042879] sdhci: Copyright(c) Pierre Ossman [ 2.042881] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.043303] sdhci-tegra 3400000.sdhci: Got CD GPIO [ 2.044349] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful [ 2.046471] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 245 [ 2.050954] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 2.052006] tegra-se-nvhost 15810000.se: initialized [ 2.052971] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 2.053709] tegra-se-nvhost 15820000.se: initialized [ 2.054954] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 2.055563] tegra-se-nvhost 15830000.se: initialized [ 2.056227] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 2.056925] tegra-se-nvhost 15840000.se: initialized [ 2.057937] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 2.058321] hidraw: raw HID events driver (C) Jiri Kosina [ 2.059609] usbcore: registered new interface driver usbhid [ 2.059612] usbhid: USB HID core driver [ 2.063464] tegra186-cam-rtcpu bc00000.rtcpu: deferring, 14800000.isp is not probed [ 2.064606] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 2.065050] tegra186-aondbg aondbg: aondbg driver probe() OK [ 2.065831] denver_knobs_init:MTS_VERSION:50168445 [ 2.065994] tegra19x_actmon d230000.actmon: in actmon_register()... [ 2.066617] tegra19x_actmon d230000.actmon: initialization Completed for the device mc_all [ 2.067058] t19x_cache tegra-cache: probed [ 2.069033] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 2.069039] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 2.069602] carmel-pmu-drv carmel-pmu: Registered Carmel PMU [ 2.069970] PLL_AON clock registered [ 2.070980] Clocks initialized successfully [ 2.072323] nvpmodel: initialized successfully [ 2.073594] trusty-virtio trusty:virtio: initializing [ 2.073824] trusty_ipc virtio0: vring0: va(pa) ffffffc1e29f0000(0) qsz 32 notifyid 1 [ 2.073838] trusty_ipc virtio0: vring1: va(pa) ffffffc1e29f2000(0) qsz 32 notifyid 2 [ 2.074010] trusty-virtio trusty:virtio: initializing done [ 2.074297] trusty_ipc virtio0: is online [ 2.074809] tegra-hda 3510000.hda: Override SDO lines to 4 [ 2.075145] usbcore: registered new interface driver snd-usb-audio [ 2.076207] i2c init [ 2.076248] i2c probe [ 2.076292] wm8731 1-001a: Assuming static MCLK [ 2.076335] hw_init start [ 2.077565] 6 [ 2.077576] i2c probe success [ 2.077686] i2c init success [ 2.077688] spi init [ 2.077723] spi init success [ 2.093595] gpio tegra-gpio wake8 for gpio=55(G:7) [ 2.093658] mmc0: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr [ 2.102913] input: tegra-hda-xnx HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0 [ 2.103136] input: tegra-hda-xnx HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1 [ 2.103393] input: tegra-hda-xnx HDMI/DP,pcm=8 as /devices/3510000.hda/sound/card0/input2 [ 2.103647] input: tegra-hda-xnx HDMI/DP,pcm=9 as /devices/3510000.hda/sound/card0/input3 [ 2.161398] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.182193] usb 1-2: New USB device found, idVendor=0424, idProduct=2744 [ 2.182197] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.182201] usb 1-2: Product: USB2744 [ 2.182203] usb 1-2: Manufacturer: Microchip Tech [ 2.183239] hub 1-2:1.0: USB hub found [ 2.183331] hub 1-2:1.0: 5 ports detected [ 2.195456] OPE platform probe [ 2.195572] OPE platform probe successful [ 2.271595] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 2.271789] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 2.271921] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 2.272028] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 2.272159] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 2.272284] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 2.272412] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 2.272523] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 2.272629] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 2.272760] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 2.272865] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok [ 2.272952] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok [ 2.273037] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok [ 2.273138] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok [ 2.273222] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok [ 2.273329] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok [ 2.273463] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok [ 2.273547] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok [ 2.273635] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok [ 2.273718] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok [ 2.278706] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.301394] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 2.303610] u32 classifier [ 2.303613] Actions configured [ 2.303684] Initializing XFRM netlink socket [ 2.304225] NET: Registered protocol family 10 [ 2.305380] NET: Registered protocol family 17 [ 2.305394] NET: Registered protocol family 15 [ 2.305445] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.305535] Bluetooth: RFCOMM socket layer initialized [ 2.305551] Bluetooth: RFCOMM ver 1.11 [ 2.305556] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.305567] Bluetooth: HIDP socket layer initialized [ 2.305602] 9pnet: Installing 9P2000 support [ 2.305643] Key type dns_resolver registered [ 2.306012] Registered cp15_barrier emulation handler [ 2.306035] Registered setend emulation handler [ 2.307521] registered taskstats version 1 [ 2.308005] tegra-pcie-dw 14160000.pcie: Setting init speed to max speed [ 2.308923] OF: PCI: host bridge /pcie@14160000 ranges: [ 2.308953] OF: PCI: IO 0x36100000..0x361fffff -> 0x36100000 [ 2.308961] OF: PCI: MEM 0x1740000000..0x17ffffffff -> 0x40000000 [ 2.308966] OF: PCI: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 2.321638] usb 1-3: New USB device found, idVendor=0424, idProduct=2512 [ 2.321644] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.322430] hub 1-3:1.0: USB hub found [ 2.322487] hub 1-3:1.0: 2 ports detected [ 2.417409] tegra-pcie-dw 14160000.pcie: link is up [ 2.417676] tegra-pcie-dw 14160000.pcie: PCI host bridge to bus 0004:00 [ 2.417684] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.417691] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 2.417696] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 2.417700] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 2.417729] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 2.417901] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.418159] iommu: Adding device 0004:00:00.0 to group 58 [ 2.418581] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 2.418698] pci 0004:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.418702] pci 0004:01:00.0: reg 0x10: [io size 0x0100] [ 2.418859] pci 0004:01:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 2.419578] pci 0004:01:00.0: supports D1 D2 [ 2.419581] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.419906] iommu: Adding device 0004:01:00.0 to group 59 [ 2.421284] mmc0: hw tuning done ... [ 2.421322] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 2.421776] mmcblk0: mmc0:aaaa SC128 119 GiB [ 2.425016] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.430645] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 2.430651] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.430658] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 2.430740] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.430770] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.430775] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.430782] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 2.430800] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 2.430877] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 2.431201] pcieport 0004:00:00.0: Signaling PME through PCIe PME interrupt [ 2.431205] pci 0004:01:00.0: Signaling PME through PCIe PME interrupt [ 2.431210] pcie_pme 0004:00:00.0:pcie001: service driver pcie_pme loaded [ 2.431315] aer 0004:00:00.0:pcie002: service driver aer loaded [ 2.431967] tegra-pcie-dw 141a0000.pcie: Setting init speed to max speed [ 2.433022] OF: PCI: host bridge /pcie@141a0000 ranges: [ 2.433042] OF: PCI: IO 0x3a100000..0x3a1fffff -> 0x3a100000 [ 2.433050] OF: PCI: MEM 0x1f40000000..0x1fffffffff -> 0x40000000 [ 2.433055] OF: PCI: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 2.513433] tegra_cec 3960000.tegra_cec: physical address: 20:00. [ 2.541392] tegra-pcie-dw 141a0000.pcie: link is up [ 2.541633] tegra-pcie-dw 141a0000.pcie: PCI host bridge to bus 0005:00 [ 2.541640] pci_bus 0005:00: root bus resource [bus 00-ff] [ 2.541646] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 2.541652] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 2.541656] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 2.541683] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 2.541808] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 2.542009] iommu: Adding device 0005:00:00.0 to group 60 [ 2.542380] pci 0005:01:00.0: [15b7:5009] type 00 class 0x010802 [ 2.542496] pci 0005:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.542642] pci 0005:01:00.0: reg 0x20: [mem 0x00000000-0x000000ff 64bit] [ 2.543388] iommu: Adding device 0005:01:00.0 to group 61 [ 2.554257] pci 0005:00:00.0: BAR 14: assigned [mem 0x1f40000000-0x1f400fffff] [ 2.554266] pci 0005:01:00.0: BAR 0: assigned [mem 0x1f40000000-0x1f40003fff 64bit] [ 2.554324] pci 0005:01:00.0: BAR 4: assigned [mem 0x1f40004000-0x1f400040ff 64bit] [ 2.554382] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 2.554408] pci 0005:00:00.0: bridge window [mem 0x1f40000000-0x1f400fffff] [ 2.554423] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 2.554464] pci 0005:01:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 [ 2.554704] pcieport 0005:00:00.0: Signaling PME through PCIe PME interrupt [ 2.554707] pci 0005:01:00.0: Signaling PME through PCIe PME interrupt [ 2.554712] pcie_pme 0005:00:00.0:pcie001: service driver pcie_pme loaded [ 2.554805] aer 0005:00:00.0:pcie002: service driver aer loaded [ 2.555164] nvme nvme0: pci function 0005:01:00.0 [ 2.561250] nvme 0005:01:00.0: enabling device (0000 -> 0002) [ 2.564505] tegra-cbb 14040000.cv-noc: noc_secure_irq = 89, noc_nonsecure_irq = 88> [ 2.571189] tegra194-isp5 14800000.isp: initialized [ 2.577421] tegra194-vi5 15c10000.vi: using default number of vi channels, 36 [ 2.577965] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 2.577969] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 2.581068] tegra194-vi5 15c10000.vi: initialized [ 2.585493] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--2 bound [ 2.585572] tegra194-vi5 15c10000.vi: subdev 15a00000.nvcsi--1 bound [ 2.586331] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 [ 2.609394] usb 1-3.1: new full-speed USB device number 4 using tegra-xusb [ 2.630540] usb 1-3.1: New USB device found, idVendor=13d3, idProduct=3549 [ 2.630545] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.630549] usb 1-3.1: Product: Bluetooth Radio [ 2.630551] usb 1-3.1: Manufacturer: Realtek [ 2.630554] usb 1-3.1: SerialNumber: 00e04c000001 [ 2.669031] tegra-ivc ivc-bc00000.rtcpu: region 0: iova=0xbfee0000-0xbfefffff size=131072 [ 2.669335] tegra-ivc ivc-bc00000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 2.669549] tegra-ivc ivc-bc00000.rtcpu:dbg@1: dbg: ver=0 grp=1 RX[1x384]=0x1900-0x1b00 TX[1x384]=0x1b00-0x1d00 [ 2.669779] tegra-ivc ivc-bc00000.rtcpu:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d00-0x3d80 TX[1x8192]=0x3d80-0x5e00 [ 2.670168] tegra-ivc ivc-bc00000.rtcpu:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e00-0xae80 TX[64x320]=0xae80-0xff00 [ 2.670243] tegra-ivc ivc-bc00000.rtcpu:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff00-0x17f80 TX[512x64]=0x17f80-0x20000 [ 2.670485] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (65) [ 2.670488] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 2.671617] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=5 sha1=cf2bef3ad10e437272857b76308abef8ffb80bda [ 2.672070] gpio tegra-gpio wake67 for gpio=48(G:0) [ 2.672161] gpio tegra-gpio-aon wake29 for gpio=36(EE:4) [ 2.672319] input: gpio-keys as /devices/gpio-keys/input/input4 [ 2.702393] tegra_rtc c2a0000.rtc: setting system clock to 2000-01-01 01:00:14 UTC (946688414) [ 2.702909] mmcblk mmc0:aaaa: Card claimed for testing. [ 2.740945] bpmp: mounted debugfs mirror [ 2.747689] vdd-1v8-sd: disabling [ 2.747694] vdd-1v8-cvb: disabling [ 2.747696] vdd-epb-1v0: disabling [ 2.747698] avdd-cam-2v8: disabling [ 2.747700] vdd-fan: disabling [ 2.747702] vdd_sys_en: disabling [ 2.747709] ALSA device list: [ 2.747712] #0: tegra-hda-xnx at 0x3518000 irq 64 [ 2.747714] #1: jetson-xaviernx-ape [ 2.889397] usb 1-2.2: new full-speed USB device number 5 using tegra-xusb [ 2.913502] usb 1-2.2: New USB device found, idVendor=24ae, idProduct=2013 [ 2.913507] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.913511] usb 1-2.2: Product: Rapoo 2.4G Wireless Device [ 2.913513] usb 1-2.2: Manufacturer: RAPOO [ 2.916014] input: RAPOO Rapoo 2.4G Wireless Device as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.0/0003:24AE:2013.0001/input/input5 [ 2.916463] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-3610000.xhci-2.2/input0 [ 2.918482] input: RAPOO Rapoo 2.4G Wireless Device as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.1/0003:24AE:2013.0002/input/input6 [ 2.977678] hid-generic 0003:24AE:2013.0002: input,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-3610000.xhci-2.2/input1 [ 2.979337] input: RAPOO Rapoo 2.4G Wireless Device as /devices/3610000.xhci/usb1/1-2/1-2.2/1-2.2:1.2/0003:24AE:2013.0003/input/input7 [ 3.038097] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-3610000.xhci-2.2/input2 [ 3.117381] usb 1-2.5: new high-speed USB device number 6 using tegra-xusb [ 3.138383] usb 1-2.5: New USB device found, idVendor=0424, idProduct=2740 [ 3.138389] usb 1-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.138392] usb 1-2.5: Product: Hub Controller [ 3.138395] usb 1-2.5: Manufacturer: Microchip Tech [ 3.962731] extcon-disp-state external-connection:disp-state: cable 51 state 1 [ 3.962735] Extcon HDMI: HPD enabled [ 3.962750] tegradc 15200000.nvdisplay: hdmi: plugged [ 3.964289] Freeing unused kernel memory: 8576K [ 4.001643] Root device found: mmcblk0p1 [ 4.002835] Found dev node: /dev/mmcblk0p1 [ 4.054020] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.054903] Rootfs mounted over mmcblk0p1 [ 4.082774] Switching from initrd to actual rootfs [ 4.264900] systemd[1]: System time before build time, advancing clock. [ 4.297994] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.302263] cgroup: cgroup2: unknown option "nsdelegate" [ 4.319519] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.320126] systemd[1]: Detected architecture arm64. [ 4.332020] systemd[1]: Set hostname to . [ 4.435162] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.435175] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.596700] random: systemd: uninitialized urandom read (16 bytes read) [ 4.596917] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.597197] random: systemd: uninitialized urandom read (16 bytes read) [ 4.597602] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.597642] random: systemd: uninitialized urandom read (16 bytes read) [ 4.597665] systemd[1]: Reached target User and Group Name Lookups. [ 4.597704] systemd[1]: Reached target Swap. [ 4.600496] systemd[1]: Created slice System Slice. [ 4.675336] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 4.762210] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:291 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 5.040710] systemd-journald[2348]: Received request to flush runtime journal from PID 1 [ 5.915292] random: crng init done [ 5.915440] random: 7 urandom warning(s) missed due to ratelimiting [ 6.001926] Wake76 for irq=199 [ 6.001934] Wake77 for irq=199 [ 6.001937] Wake78 for irq=199 [ 6.001941] Wake79 for irq=199 [ 6.001944] Wake80 for irq=199 [ 6.001947] Wake81 for irq=199 [ 6.001949] Wake82 for irq=199 [ 6.002010] tegra-xusb 3610000.xhci: Upgrade port 0 to USB3.0 [ 6.002016] tegra-xusb 3610000.xhci: Upgrade port 1 to USB3.0 [ 6.156065] rtl88x2ce 0004:01:00.0: enabling device (0000 -> 0003) [ 6.179749] using random self ethernet address [ 6.179932] using random host ethernet address [ 6.329671] usb 2-3: new SuperSpeed USB device number 2 using tegra-xusb [ 6.350150] usb 2-3: New USB device found, idVendor=0424, idProduct=5744 [ 6.350162] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 6.350167] usb 2-3: Product: USB5744 [ 6.350172] usb 2-3: Manufacturer: Microchip Tech [ 6.352358] hub 2-3:1.0: USB hub found [ 6.352750] hub 2-3:1.0: 4 ports detected [ 6.949422] usb 2-3: usb_suspend_both: status 0 [ 6.949617] usb usb2: usb_suspend_both: status 0 [ 6.986840] Mass Storage Function, version: 2009/09/11 [ 6.986852] LUN: removable file: (no medium) [ 6.991963] using random self ethernet address [ 6.992155] using random host ethernet address [ 7.054243] usbcore: registered new interface driver btusb [ 7.070785] rtk_btusb: Realtek Bluetooth USB driver ver 3.1 [ 7.070794] rtk_btcoex: rtk_btcoex_init: version: 1.2 [ 7.070798] rtk_btcoex: create workqueue [ 7.071162] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2 [ 7.071244] rtk_btusb: btusb_probe intf->cur_altsetting->desc.bInterfaceNumber 0 [ 7.071249] rtk_btusb: btusb_probe can_wakeup 1, may wakeup 0 [ 7.071252] rtk_btusb: patch_add [ 7.071255] rtk_btusb: auto suspend is disabled [ 7.071260] rtk_btusb: pid = 0x3549 [ 7.071264] rtk_btusb: patch_add: Reset gEVersion to 0xff [ 7.071276] rtk_btusb: set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); [ 7.074158] rtk_btusb: btusb_probe: done [ 7.074170] rtk_btusb: btusb_open start [ 7.074177] rtk_btusb: btusb_open hdev->promisc ==0 [ 7.074351] rtk_btusb: download_patch start [ 7.074357] rtk_btusb: chip type value: 0x73 [ 7.074361] rtk_btusb: HCI reset. [ 7.075321] usbcore: registered new interface driver rtk_btusb [ 7.075740] rndis0: HOST MAC 2e:f4:3d:ca:45:9c [ 7.076306] rndis0: MAC 2e:f4:3d:ca:45:9d [ 7.078469] usb0: HOST MAC 2e:f4:3d:ca:45:9e [ 7.078515] usb0: MAC 2e:f4:3d:ca:45:9f [ 7.078538] tegra-xudc-new 3550000.xudc: exiting ELPG [ 7.081469] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 7.081503] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled [ 7.081546] tegra-xudc-new 3550000.xudc: entering ELPG [ 7.081804] tegra-xudc-new 3550000.xudc: entering ELPG done [ 7.082238] tegra-xudc-new 3550000.xudc: exiting ELPG [ 7.083575] tegra-xudc-new 3550000.xudc: exiting ELPG done [ 7.083603] tegra-xudc-new 3550000.xudc: entering ELPG [ 7.083793] tegra-xudc-new 3550000.xudc: entering ELPG done [ 7.085410] rtk_btusb: read_ver_rsp->lmp_subver = 0x8822 [ 7.085424] rtk_btusb: read_ver_rsp->hci_rev = 0xc [ 7.085438] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 7.085443] rtk_btusb: load_firmware start [ 7.085447] rtk_btusb: lmp_version = 0x8822 [ 7.085451] rtk_btusb: config filename rtl8822cu_config [ 7.091931] l4tbr0: port 1(rndis0) entered blocking state [ 7.091935] l4tbr0: port 1(rndis0) entered disabled state [ 7.094154] device rndis0 entered promiscuous mode [ 7.109705] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 7.113069] rtk_btusb: no bdaddr file /opt/bdaddr [ 7.113074] rtk_btusb: 55 ab 23 87 00 00 [ 7.113089] rtk_btusb: Config file length 6, new length 6 [ 7.113092] rtk_btusb: fw name is rtl8822cu_fw [ 7.116314] rtk_btusb: This is not 8723a, use new patch style! [ 7.116321] rtk_btusb: rtk_get_eversion: gEVersion 255 [ 7.117418] rtk_btusb: eversion->status = 0x0, eversion->version = 0x3 [ 7.117422] rtk_btusb: load_firmware: New gEVersion 3 [ 7.117425] rtk_btusb: rtk_get_fw_project_id: opcode 0, len 1, data 13 [ 7.117428] rtk_btusb: lmp_version is 8822, project_id is 8822, match! [ 7.117430] rtk_btusb: fw_version = 0x98a42f7 [ 7.117432] rtk_btusb: number_of_total_patch = 3 [ 7.117433] rtk_btusb: chipID 4 [ 7.117435] rtk_btusb: patch_length 0x55f0 [ 7.117437] rtk_btusb: start_offset 0x00005d00 [ 7.117440] rtk_btusb: Svn version: 21761 [ 7.117442] rtk_btusb: Coexistence: BTCOEX_20190509-0d0d [ 7.117446] rtk_btusb: buf_len = 0x55f6 [ 7.117461] rtk_btusb: fw: exists, config file: exists [ 7.117463] rtk_btusb: load_firmware done [ 7.117486] rtk_btusb: download_data start [ 7.118822] l4tbr0: port 2(usb0) entered blocking state [ 7.118825] l4tbr0: port 2(usb0) entered disabled state [ 7.119016] device usb0 entered promiscuous mode [ 7.127299] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 7.194455] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.194467] Bluetooth: BNEP socket layer initialized [ 7.230421] rtk_btusb: download_data done [ 7.230424] rtk_btusb: HCI reset. [ 7.241446] rtk_btusb: read_ver_rsp->lmp_subver = 0x42f7 [ 7.241449] rtk_btusb: read_ver_rsp->hci_rev = 0x98a [ 7.241451] rtk_btusb: patch_entry->lmp_sub = 0x8822 [ 7.241458] rtk_btusb: Rtk patch end 0 [ 7.241461] rtk_btusb: btusb_open set HCI_RUNNING [ 7.241500] rtk_btcoex: Open BTCOEX [ 7.241503] rtk_btusb: btusb_open end [ 7.243395] rtk_btcoex: BTCOEX hci_rev 0x098a [ 7.243399] rtk_btcoex: BTCOEX lmp_subver 0x42f7 [ 7.263401] rtk_btusb: btusb_notify: hci0 evt 3 [ 7.787078] ras_fhi_disable: FHI 470 disabled [ 7.788112] CPU2: shutdown [ 7.805417] psci: Retrying again to check for CPU kill [ 7.805437] psci: CPU2 killed. [ 7.851026] ras_fhi_disable: FHI 471 disabled [ 7.858264] CPU3: shutdown [ 7.877461] psci: Retrying again to check for CPU kill [ 7.877474] psci: CPU3 killed. [ 7.918477] ras_fhi_disable: FHI 472 disabled [ 7.921557] CPU4: shutdown [ 7.941424] psci: Retrying again to check for CPU kill [ 7.941440] psci: CPU4 killed. [ 7.987070] ras_fhi_disable: FHI 473 disabled [ 7.994766] CPU5: shutdown [ 8.013457] psci: Retrying again to check for CPU kill [ 8.013483] psci: CPU5 killed. [ 8.017811] nvgpu: 17000000.gv11b tpc_pg_mask_store:843 [INFO] no value change, same mask already set [ 8.114710] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.426198] gpio tegra-gpio wake20 for gpio=52(G:4) [ 8.432902] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.464193] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.749319] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.901051] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.336745] zram: Added device: zram0 [ 9.340173] zram: Added device: zram1 [ 9.381870] zram0: detected capacity change from 0 to 2035142656 [ 9.427861] Adding 1987440k swap on /dev/zram0. Priority:5 extents:1 across:1987440k SS [ 9.453179] zram1: detected capacity change from 0 to 2035142656 [ 9.478251] Adding 1987440k swap on /dev/zram1. Priority:5 extents:1 across:1987440k SS [ 10.017848] eqos 2490000.ether_qos eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 10.018485] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.836069] tegradc 15200000.nvdisplay: blank - powerdown [ 11.899015] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 11.899020] Extcon AUX1(HDMI) disable [ 11.921288] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 11.921890] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 11.922222] tegradc 15200000.nvdisplay: unblank [ 11.925806] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 11.925934] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 11.927688] Parent Clock set for DC plld2 [ 11.932295] tegradc 15200000.nvdisplay: hdmi: tmds rate:108000K prod-setting:prod_c_hdmi_54m_111m [ 11.933676] tegradc 15200000.nvdisplay: hdmi: get RGB quant from EDID. [ 11.933685] tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID. [ 11.969570] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 11.969574] Extcon AUX1(HDMI) enable [ 11.969814] tegradc 15200000.nvdisplay: unblank [ 11.969826] tegradc 15210000.nvdisplay: blank - powerdown [ 15.992031] fuse init (API version 7.26) [ 17.848028] tegradc 15200000.nvdisplay: unblank [ 17.848042] tegradc 15210000.nvdisplay: blank - powerdown