Boot from USB SSD after adding FDT /boot/arducam/tegra210-p3448-0000-p3449-0000-b00-imx477.dtb in extlinux.conf

[ssvemail1987]

JetPack 4.5 Production Release with L4T 32.5

Thanks, that worked. What I did: Create GPT partition table on USB device with only one ext4 partition with the label “APP” (the docs suggest so, but it’s probably not significant) Clone the mounted and running system to the USB device (method suggested by the Arch Wiki): $ sudo e2image -ra -p /dev/mmcblk1 /dev/sda1 -f Edit /boot/extlinux/extlinux.conf on USB device to boot from /dev/sda1 instead of /dev/mmcblk1. (I tried with de UUID instead of /dev/sda but it didn’t work, maybe I wrote i…