Devicetree entry does not boot properly in grub

[ritesh-kumar]

@sean.pan ,
you can try this, I am sure that it will work for you as well.

The system fails to boot with a custom DTB with Jetpack 5.1.4 & 6.2

Hi @KevinFFF, I’ve figured out the root cause of the issue — it originates from the Jetson UEFI firmware. When using a custom device tree and specifying it in the boot configuration file like this: devicetree /tegra234-p3768-0000+p3767-0005-nv.dtb the system correctly uses the specified DTB during boot. However, applying the overlay DTBOs fails with the following error: UpdateFdt: Applying overlays from firmware media. Processing "L4T Configuration Settings" DTB overlay Processing "Tegra2…

Thanks,
Ritesh