I have this case of use: I need to flash a Xavier NX production module to boot from the nvme, all the components of the image, including the boot image must be located on the nvme. But the command is not flashing at all. It’s reporting a successful flash, but it is not done. The command that I…

Then will it succeed with the default partition layout? Also, please use device type=“external” , but not device type=“nvme”

Flashing a Xavier NX with initrd Jetpack 5.1.1

system Closed August 30, 2023, 1:10am 23

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.

Topic		Replies	Views
Jetson Xavier NX flash to nvme / flash bootloader only Jetson Xavier NX nvme , flash	7	714	January 1, 2024
Xavier NX JP5 flash NVME on custom board Jetson Xavier NX reflash , board-design	7	516	November 2, 2023
Xavier NX 8G boot issue Jetson Xavier NX	10	786	February 17, 2023
Xavier NX booting from NVMe ssd using initrd flash script Jetson Xavier NX boot , nvme	15	3397	December 15, 2021
Error when flashing an NVMe ssd with initrd Jetson Xavier NX nvme	5	3927	January 11, 2022
Jetpack-5.0.2 - Failed to flash NVMe with custom dtb and kernel's Image Jetson Xavier NX reflash , kernel , nvme	8	1724	January 8, 2023
How can I flash a nvm drive with a separate boot partition? Jetson Xavier NX boot	3	604	October 17, 2021
How to flash JetPack 5.1.2 image to NVMe SSD on Xavier NX, and bootup from NVMe SSD Jetson Xavier NX boot , nvme	10	696	March 11, 2024
Trouble Flashing NVMe on Jetson Xavier NX : "Disk Avail on Partition : 0.00 B " Jetson Xavier NX reflash	2	234	July 8, 2024
Managed to flash jetson xavier nx custom board with JP462 not JP502 Jetson Xavier NX reflash , board-design	42	2430	October 19, 2022