Gstreamer RTSP server setup

[DaneLLL]

Hi,
There are several posts about RTSP. FYR.

VLC playing gstreamer flow

Please also try test-launch.c @ gst-rtsp-server/test-launch.c at master · GStreamer/gst-rtsp-server · GitHub Target sudo apt-get install libgstrtspserver-1.0 libgstreamer1.0-dev gcc test-launch.c -o test-launch $(pkg-config --cflags --libs gstreamer-1.0 gstreamer-rtsp-server-1.0) ./test-launch “videotestsrc ! omxh265enc ! rtph265pay name=pay0 pt=96” Host Open network stream rtsp://<TARGET_IP_ADDRESS>:8554/test via VLC

Problems minimizing latency and maximizing quality for rtsp and mpeg-ts.

We do not observe long latency in streaming with nvcamerasrc: Server $ ./test-launch "nvcamerasrc ! video/x-raw(memory:NVMM),width=640,height=480 ! tee name=t t. ! queue ! nvoverlaysink overlay-x=50 overlay-y=50 overlay-w=640 overlay-h=480 t. ! queue ! omxh264enc ! video/x-h264,profile=baseline ! rtph264pay name=pay0 pt=96" Client $ export RTSP_PATH=rtsp://127.0.0.1:8554/test $ gst-launch-1.0 rtspsrc location="$RTSP_PATH" latency=500 ! rtph264depay ! h264parse ! omxh264dec ! nvoverlaysink ov…

Stream 4k webcam - GStreamer

Hi, There is a know memleak. Please apply the patch. https://elinux.org/L4T_Jetson/r32.2.1_patch [MMAPI][DS4.0] Memory leak in MJPEG decoding With patch being applied, we can launch E-Con See3CAM_CU135 in executing the command: $ sudo jetson_clocks $ ./test-launch "v4l2src device=/dev/video1 io-mode=2 ! image/jpeg,width=3840,height=2160,framerate=30/1 ! nvjpegdec ! video/x-raw ! omxh265enc ! rtph265pay name=pay0 pt=96"