Jetson TK1 on Percepto : Failed flashing ardbeg (download command failed NvError 0x120002)

Hi Mike_0b,

Where can I download the image and find the instructions ?

could you please tell me how to deal with the ‘failed device ardbeg’? I now have the exact problem like yours. Thank so much.

Hi stella950611,

Could you be more specific ? You have a Percepto ?

If you have a Percepto, you can download an image there (rev-D-external-recovery-bct.tar.gz). This image is probably old ( september 2016 ) but I don’t have another.

When wou have downloader the image, you have to uncompress it and follow the reinstall procedure.

#without recovery mode
$ lsusb 
Bus 002 Device 009: ID 0525:a4a2 Netchip Technology, Inc. Linux-USB Ethernet/RNDIS Gadget
(...)
 
#recovery mode
$ lsusb 
Bus 002 Device 010: ID 0955:7740 NVidia Corp. 
(...)
 
$ cd jetson/percepto/
 
~/jetson/percepto$ ls
clone_or_restore_board.sh  PM358_Micron_MID_2GB_MT41K256M16HA_792MHz.cfg
fastboot.bin               rev_d_external.img
flash.cfg                  rev-D-external-recovery-bct.tar.gz
nvflash                    tegra124-percepto1.dtb
 
~/jetson/percepto$ ./clone_or_restore_board.sh init rev_d_external.img

I hope this will help. If not, the best solution is contact the Percepto team.