Kernel Call trace: nvvrs-pseq-irq nobody cared

Robotics & Edge Computing Jetson Systems Jetson AGX Orin
,
9

please check if this patch would help for your case.

diff --git a/pmic/tegra234-mb1-bct-pmic-p3701-0005.dts b/pmic/tegra234-mb1-bct-pmic-p3701-0005.dts
index 6897bc5..de0c116 100644
--- a/pmic/tegra234-mb1-bct-pmic-p3701-0005.dts
+++ b/pmic/tegra234-mb1-bct-pmic-p3701-0005.dts
@@ -85,11 +85,24 @@
 			reg-addr-size = <8>;
 			block-delay = <3>;
 			commands {
+				/* Enable DCM mode for LOOP-A/B */
 				command@1 {
 					reg-addr = <0x4B>;
 					mask = <0xFFFF>;
 					value = <0x94F0>; //Format: <PEC><VALUE> where PEC = CRC8(<slave-addr><reg-addr><VALUE>)
 				};
+				/* Disable CCL interrupt for LOOP-A */
+				command@2 {
+					reg-addr = <0x42>;
+					mask = <0xFFFF>;
+					value = <0xCF08>; //Format: <PEC><VALUE> where PEC = CRC8(<slave-addr><reg-addr><VALUE>)
+				};
+				/* Disable CCL interrupt for LOOP-B */
+				command@3 {
+					reg-addr = <0x43>;
+					mask = <0xFFFF>;
+					value = <0xDA08>; //Format: <PEC><VALUE> where PEC = CRC8(<slave-addr><reg-addr><VALUE>)
+				};
 			};
 		};
 		block@1 {
@@ -211,11 +224,24 @@
 			reg-addr-size = <8>;
 			block-delay = <3>;
 			commands {
+				/* Enable DCM mode for LOOP-B */
 				command@1 {
 					reg-addr = <0x4B>;
 					mask = <0xFFFF>;
 					value = <0x88A0>; //Format: <PEC><VALUE> where PEC = CRC8(<slave-addr><reg-addr><VALUE>)
 				};
+				/* Disable CCL interrupt for LOOP-A */
+				command@2 {
+					reg-addr = <0x42>;
+					mask = <0xFFFF>;
+					value = <0x6408>; //Format: <PEC><VALUE> where PEC = CRC8(<slave-addr><reg-addr><VALUE>)
+				};
+				/* Disable CCL interrupt for LOOP-B */
+				command@3 {
+					reg-addr = <0x43>;
+					mask = <0xFFFF>;
+					value = <0x7108>; //Format: <PEC><VALUE> where PEC = CRC8(<slave-addr><reg-addr><VALUE>)
+				};
 			};
 		};