Hi. The project I’m trying to implement needs more UART ports, at least 6, better if it’s more than 6. I have already tried to use USB hub and several USB-> UART adapters, it works but a long time of use has shown that this solution is not reliable. Sometimes the adapters disappear from the system…

I, you can use an I2C to UART converter or simply use a USB hub, Regards

TX2 add UART ports

Robotics & Edge Computing Jetson & Embedded Systems Jetson TX2

svl4583 April 5, 2021, 9:45am 11

hello Bibek
Thanks for your reply.
The idea of using a CAN bus looks good but then I need to somehow adapt the devices with a UART interface to work with a CAN bus.
I still just wanted to get extra UART ports.

Best regards,
Ihor Starnavskyi

Topic		Replies	Views
UART example on Jetson TX2? Jetson TX2	2	3908	October 18, 2021
How many UART can be used on TX2 Jetson TX2 uart	2	437	October 18, 2021
TX2 UART: Exposing alternate functionality through J21/J26 Jetson TX2	4	1173	October 18, 2021
How do The UART port in TX2 convert to RS232??? Jetson TX2	16	6939	October 18, 2021
Using GPIO for Serial UART Communication Jetson TX2	8	1992	October 18, 2021
How to use UART on Jetson TX2 to receive serial commands over UART from another hardware? Jetson TX2 uart	2	859	October 18, 2021
uart2_tx sends garbage with Jetson TX2; works perfectly with Jetson TX1 Jetson TX2	5	495	October 18, 2021
How to diabale BT and use TX2's ttyTHS3 as an common UART ? Jetson TX2	2	908	October 18, 2021
Jetson TX1 4xUART Jetson TX1	13	6465	July 30, 2016
UART to female USB 3.0? Jetson TX1	10	3932	July 10, 2016

TX2 add UART ports

Related topics