Hi everyone, I’m busy with Jetson nano unable to boot. I already know that the reason why I can’t boot is that there is a problem with EEPROM data.I found that the last byte of EEPROM data in all the abnormal modules was 0X80. But I don’t know what 0X80 means.Can anyone help me? Thanks a lot.

please refer to [image] After i2cset test, nano can't boot in eMMC boot evironment Jetson Nano Hey… why your log shows you are flashing -k LNX ? You should use the full flash command. shin@shin-miniPC:~/work/tmp2/Linux_for_Tegra$ sudo ./flash.sh -k LNX jetson-nano-emmc …

Unable to boot, EEPROM suspected to be modified

Robotics & Edge Computing Jetson Systems Jetson Nano

WayneWWW November 21, 2022, 6:40am 6

please refer to

Topic		Replies	Views
Updating EEPROM MAC address Erased it to junk values , now nano (3448)does not boot, How to Fix it Jetson Nano boot	2	746	October 15, 2021
Trouble Flashing Jetson Nano Dev Boards Jetson Nano boot , reflash , usb	15	4335	October 15, 2021
How to restore corrupt Jetson Nano (Original) EEPROM Jetson Nano eeprom	6	160	May 22, 2025
Jetson Nano Programming Stops Jetson Nano boot , hw , reflash , board-design	4	1175	October 15, 2021
After EEP modif, nano does not boot any more Jetson Nano boot	27	1630	October 15, 2021
Nano boot fail, EEPROM CRC failed Jetson Nano boot	7	1046	June 29, 2022
Jatson Nano boot fail after modified MAC address in E2PROM Jetson Nano boot	6	529	October 18, 2021
How to recover Nano SOM eeprom? Jetson Nano kernel	17	2846	October 15, 2021
It seems I have bricked Jetson Nano by writing to the I2C EEPROM Jetson Nano boot , hw , reflash	4	1397	October 15, 2021
Jetson Nano does not boot up Jetson Nano sdkm , boot	23	3121	October 15, 2021

Unable to boot, EEPROM suspected to be modified

Related topics