Xavier nx cannot boot when receiving with UART0

Autonomous Machines Jetson & Embedded Systems Jetson Xavier NX
7

The system is stuck on the UEFI screen and does not start - Jetson & Embedded Systems / Jetson AGX Orin - NVIDIA Developer Forums

After making the changes, I encountered the same problem as in the above post.

image
image1873×503 27 KB

Attached is the log information to be closed.
boot_error.txt (111.6 KB)

edkrepo clone nvidia-uefi-r35.4.1 NVIDIA-Platforms r35.4.1-updates

I used this command to get UEFI source code
look forward to your reply.