Hello there, Last few months we are trying to enable flash to external SSD card with no luck. We really need your help to figure out the issues. We have the worst experience ever with your documentation. Core board：xavier-nx 16G I enter the following instructions sudo ./tools/kernel_flash/l4t_…

Initrd flash tool requires that you are able to create a ssh connection from the host to the target through the target. The log shows that it ended here: Waiting for device to expose ssh ...Run command: flash on fc00:1:1:0::2 Cleaning up... That means the ssh timeout even though it can ping the d…

An error occurred using the method of flashing with initrd

Autonomous Machines Jetson & Embedded Systems Jetson Xavier NX

WayneWWW April 8, 2022, 2:16pm 2

Hi,

Not sure if this is same issue or not. Please check if the workaround in this post can help