Hello, We are using TX2 and two leopard imaging IMX577 cameras. The OS of TX2 is L4T 32.5.0. Argus 0.97.3. I found that if I set the strength of edge enhancement to say 0.15, then when I read the strength value from the meta data of the frames, its value is 0.85, which is 1 minus 0.15. I have trie…

Yes, that is correct. [image] jon7: the actual value I should use is 1-0.85=0.15. Is my understanding correct? Auto mode should be the EDGE_ENHANCE_MODE_FAST

Argus 0.97.3 setting camera sharpness in edge enhancement having issue

Robotics & Edge Computing Jetson & Embedded Systems Jetson TX2

jon7 December 21, 2021, 9:29am 4

Hi Shane, I am using different version than yours. Can you check 32.5.0?

Thanks.

Topic		Replies	Views
Argus camera instability issue Jetson TX2	14	1733	October 18, 2021
Argus errors with high cpu load and subsequent issues Jetson TX2 camera	27	5130	October 18, 2021
Argus manual exposure issue Jetson AGX Xavier camera	10	1708	November 27, 2020
Reopen: Volatile exposure time / frame time Jetson AGX Xavier camera	30	930	May 25, 2022
L4T 28.1 Error while using argus for image capture Jetson TX1	5	971	October 18, 2021
Acquisition at 120fps using libargus not working Jetson TX1	10	2825	May 5, 2017
Adjusting exposure range with Leopard Imaging IMX264 Jetson TX2	4	1381	September 26, 2018
Can I turn off or reduce Argus ISP image sharpening (edge enhancement) Jetson Xavier NX camera , nvbugs	24	1492	August 2, 2024
Argus nvraw source code Jetson AGX Orin camera	15	105	September 18, 2024
Tegra Multimedia API - only subset of camera settings available? Jetson TX2	6	1783	October 18, 2021

Argus 0.97.3 setting camera sharpness in edge enhancement having issue

Related topics