In jetpack 5.1.2, I managed to enable HDMI and disable DP by using p3509-a02+p3767-0000.conf, it turns out the erro like attached file occured during bootup. While it is perfectly fine when I used jetpack 5.1.1. I appreciate the time you spend to investigate that, thanks. bootup_log_orin_nx_jetpa…

You are asking a known issue on rel-35.4.1. Please refer to [image] CPU:0, Error: dce-fabric@0xde00000, irq=28 Jetson Orin NX Hello, I am using jetpack 5.1.2 and flashing a Orin NX with this command: sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-device nvme0n1…

Hi, For Orin series, we suggest use DP output. There is deviation between Orin NX and Xavier NX modules as mentioned in https://developer.nvidia.com/embedded/faq#jetson-compatibility We would suggest use Orin NX module + Orin Nano carrier board. It may not work properly in Orin NX module + Xavier…

Thanks for your response. Does that mean currently Jetpack 5.1.2 only support DP for Orin NX? If that is the case, is there a plan to make it work for HDMI in the near future?

Boot up error when enabling HDMI by using p3509-a02+p3767-0000.conf , the Jetpack is 5.1.2

Robotics & Edge Computing Jetson Systems Jetson Orin NX

Topic		Replies	Views
Jetson Orin NX 8G HDMI 4k doesn't work Jetpack5.1.2 with p3509-a02+p3767-0000.conf Jetson Orin NX kernel , board-design	3	415	October 24, 2023
Jetson orin HDMI out Jetson Orin NX hdmi	2	386	April 16, 2024
HDMI output with jetpack 6.2.1 Jetson Orin NX hw , hdmi , software , level2	23	540	September 24, 2025
ORIN NX unable to use HDMI display Jetson Orin NX board-design , device-tree , hdmi	20	412	May 7, 2025
Jetpack 6.2.1 Linux 36.4.4, HDMI Trouble Jetson AGX Orin hdmi , dp-display	34	496	August 25, 2025
Orin NX HDMI output Jetson Orin NX board-design , hdmi	6	1616	August 9, 2023
4K (3840x2160) HDMI output Orin NX Jetson Orin NX hdmi	12	337	December 13, 2024
ENABLE DP PORT IN ORIN NX Jetson Orin NX dp-display	12	210	October 22, 2025
Orin no HDMI output Jetson Orin NX hdmi	9	1834	April 28, 2023
HDMI Display Not Working at Boot on NX 16GB Custom Board After JetPack 7.0 Migration Jetson Orin NX board-design , hdmi	9	189	October 1, 2025

Boot up error when enabling HDMI by using p3509-a02+p3767-0000.conf , the Jetpack is 5.1.2

Related topics