System: Jetson Linux R36.4.3, Core board: jetson nano 4g. When I configure grub as shown in the attachment, the system cannot boot normally, and the error message is as follows: [image] grub.zip (3.2 KB) Could you tell me why this is? Note: When I remove the devicetree entry, the system boots …

Processing "Tegra234 p3768-0000+p3767-xxxx Dynamic Overlay" DTB overlay Failed to apply device tree overlay. Error Code = -3 UpdatePcieControllersWithGpuDevice: failed to enumerate GPU device handles: Not Found LocateChildGopHandle: failed to enumerate graphics output device handles: Not Found fdt_c…

Devicetree entry does not boot properly in grub

Robotics & Edge Computing Jetson & Embedded Systems Jetson Orin Nano

WayneWWW July 3, 2025, 3:27am 7

maybe refer to this post first.

Topic		Replies	Views
Jetpack 6.1 GRUB not booting Jetson Orin Nano installation	21	781	March 12, 2025
关于设备树 Jetson Orin Nano device-tree , chinese	2	320	March 26, 2024
The system fails to boot with a custom DTB with Jetpack 5.1.4 & 6.2 Jetson Orin Nano boot , board-design , device-tree , firmware-tools , uefi	9	246	August 13, 2025
How do i change the device tree? Jetson Nano device-tree	14	8278	July 28, 2021
Jetson-IO not working on Jetson Orin Nano Jetson Orin Nano device-tree	4	308	June 25, 2024
Device-tree and bring-up for custom Jetson Nano carrier Jetson Nano boot , reflash , kernel , cboot , device-tree , uboot	4	3393	November 11, 2022
What is the correct dtb file to use for grub? Jetson Orin NX device-tree	3	775	March 6, 2024
NVIDIA custom carrier board stuck at boot logo Jetson Nano boot , board-design	38	1927	April 6, 2022
Build custom device tree for jetson orin nano 8GB Jetson Orin Nano board-design , device-tree	2	91	April 2, 2025
Unable to get modified devicetree bootup in Jetson Nano Jetson Nano camera , boot , reflash , nvbugs	19	1828	February 10, 2022

Devicetree entry does not boot properly in grub

Related topics