e-CAM30_CUTX1 is a 3.4 Mega pixel 4 lane MIPI CSI-2 custom lens camera board for NVIDIA Jetson Tegra X1 Development Kit. This camera is based on 1/3 inch AR0330 CMOS Image sensor from ON Semiconductor® with 2.2 µm pixel and A-Pix™ technology. e-CAM30_CUTX1 enables an excellent low-light performance and can capture good quality images even at 0.5 lux. It has an S-mount(M12) lens holder which allows customers to change the lens according to their requirement. This camera can be directly connected to camera connector(J22) on the NVIDIA Jetson TX1 Development Kit. e-CAM30_CUTX1 is exposed as a standard V4L2 device and customers can use the V4L2 APIs to access this camera and control the same.