Jetson Systems Jetson TX2
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
Jetson TX2 NX Lifecycle Extension
Jetson TX2 NX has been widely adopted by our customers worldwide since becoming available in 2021. NVIDIA is extending the availability of Jetson TX2 NX an additional two years through January 2028. Check out our Produc… |
|
6 | 2491 | July 12, 2024 |
|
JetPack 4.6.4/L4T 32.7.4 released
JetPack 4.6.4 with L4T 32.7.4 is released which brings security fixes and adds Image based OTA support for Jetson AGX Xavier 32GB with Hynix DRAM and Western Digital EMMC - PCN 208560 This release supports Jetson AGX Xa… |
|
2 | 2455 | July 12, 2023 |
|
Jetson Software Roadmap for 2H-2021 and 2022
NVIDIA continuously invests in JetPack and regularly ships software updates to enable performance improvements, new capabilities, and support for new modules and developer kits. In this announcement, we provide details a… |
|
5 | 11601 | May 28, 2021 |
|
TensorFlow for Jetson TX2!
Our official release of TensorFlow for Jetson TX2! Python 3.6+JetPack4.6.3 $ sudo apt-get update $ sudo apt-get install libhdf5-serial-dev hdf5-tools libhdf5-dev zlib1g-dev zip libjpeg8-dev liblapack-dev libblas-dev gf… |
|
113 | 49086 | September 21, 2023 |
|
EOL Notice for NVIDIA Jetson TX2 Developer Kit
The Jetson TX2 Developer Kit will stop shipping from NVIDIA at the end of 2020. Distributors will continue to sell the developer kit while supplies last, so contact your distributor to discuss purchasing timelines. Jets… |
|
12 | 14270 | June 1, 2022 |
|
TX2 spi maximum speed cannot exceed 25MHz
|
|
0 | 6 | May 14, 2026 |
|
Jetson Product EOL Updates
|
|
0 | 16 | May 13, 2026 |
|
TX2 spi maximum speed cannot exceed 25MHz
|
|
14 | 145 | May 13, 2026 |
|
GStreamer stops unexpectedly after getting H.264 for about 7 minutes
|
|
6 | 1390 | May 11, 2026 |
|
Jetson TX2 NX + SerDes single-link camera: stream starts, then repeated PXL_SOF syncpt timeout / CHANSEL_SHORT_FRAME / CHANSEL_NOMATCH
|
|
4 | 36 | May 11, 2026 |
|
CSI port GANG MODE
|
|
11 | 87 | May 5, 2026 |
|
TX2 NX uartc Some data was lost during reception
|
|
3 | 36 | April 29, 2026 |
|
List of MAC OUI
|
|
3 | 45 | April 28, 2026 |
|
P3310 jetson TX2 conducted RF output power test report
|
|
6 | 66 | April 24, 2026 |
|
[Jetson tx2 nx] can't find JetPack 4.6.1
|
|
2 | 39 | April 14, 2026 |
|
YOLOv8 ONNX → TensorRT on Jetson TX2 gives wrong predictions (evaluation stuck / always 1)
|
|
4 | 59 | April 13, 2026 |
|
Renaming back /usr directory on jetson tx2
|
|
8 | 54 | April 7, 2026 |
|
Need Ordering part number for NVIDIA Pro Jetson AT017 board + TX2 NX module + fan + cable + power supply
|
|
3 | 25 | March 24, 2026 |
|
Getting TX2 to work on J120 in 2026
|
|
2 | 33 | March 24, 2026 |
|
Potential deadlock when opening video decoder and calling cudaSetDevice() concurrently
|
|
4 | 52 | March 18, 2026 |
|
Jetson TX2 NX current consumption behaviour
|
|
2 | 35 | March 24, 2026 |
|
TX2 Ethernet interface going up and down at 1Gbps
|
|
12 | 2531 | March 12, 2026 |
|
UART data transmission at 4MBPS for UART2/ serial@3110000
|
|
3 | 37 | February 23, 2026 |
|
Upgrading of Jetson TX2
|
|
3 | 82 | February 13, 2026 |
|
Need support on Jetson Tx2i board with TEVS-AR0234-C-S32-IR MIPI Camera
|
|
2 | 48 | February 9, 2026 |
|
TX2i（R32.7.4）custom board USB3.0 issue
|
|
11 | 101 | February 25, 2026 |
|
TX2 dynamic change to spi x2 Mode didn't work
|
|
2 | 35 | February 2, 2026 |
|
Enabling PCIe card on Jetson TX2 custom board
|
|
3 | 51 | January 29, 2026 |
|
TX2 NX does not enter APX (Force Recovery)
|
|
2 | 35 | January 28, 2026 |
|
Iommu context fault when trying to collect image data
|
|
4 | 60 | January 23, 2026 |