./flash.sh -k kernel jetson-tx2 mmcblk0p1 nothing change

Robotics & Edge Computing Jetson & Embedded Systems Jetson TX2
1

Hi Nvidia team,
I modifid kernel for tx2 . Compiling passed and Image and dts replaced in JetPack_4.2.2_Linux_GA_P3310/Linux_for_Tegra/kernel. And then I use the commad “sudo ./flash.sh -k kernel jetson-tx2 mmcblk0p1” like xavier. And then booting, nothing changed,uname -a still old time.
Can you guys help me ? how to flash kernel only?

2

Could you try with “-r -k kernel”?

3

Hi ,WayneWWW
Just solved. I found kernel was load from /boot/Image not mmcblk0p26 even it has mmcblk0p26.I think TX2 and xavier is same before. Thanks for your guys help.
BTW,my release verison is

R32 (release), REVISION: 2.1, GCID: 16294929, BOARD: t186ref, EABI: aarch64, DATE: Tue Aug 13 04:45:36 UTC 2019