Flash TX2 with SD card

Robotics & Edge Computing Jetson & Embedded Systems Jetson TX2
6

Hi @linuxdev

I am not exactly sure from your post what I need to do. Do the mean the I should follow the procedure below?

Option 1:

On jetson tx2 with SD card inserted, run

sudo ./flash.sh -S 28GiB jetson-tx2 mmcblk0p1

Option 2:

  1. Remove the SD card from Jetson tx2 and insert it to another linux computer
  2. The linux computer has a program “flash.sh”, which is from jetpack.
  3. Connect Jetson Tx2 mini USB port to the linux computer USB port with cable. Setup Jetson to recover mode
  4. On linux computer, run
sudo ./flash.sh -S 28GiB jetson-tx2 mmcblk0p1