Hi Nvidia, Hardware: Jetson Orin NX System version: Jetpack 5.1.3 ( R35.5.0) Camera: 2M raw Camera and 8M raw camera 1.Apply this patch [image] When the camera driver was upgraded from r35.4.1 to r35.5.0, a kernel crash occurred when vi could not receive data Jetson AGX Orin …

hello norman_xu, you may try adding --network usb0 to flash pipeline. or.. partition update has disabled if those were fused (i.e. secureboot enabled) anyways, [image] norman_xu: Verified again, the issue is solved, thanks. got it, thanks for status update.

Hi, For the camera basic functionality first needs to check the device and driver configuration. You can reference to below program guide for the detailed information of device tree and driver implementation. https://docs.nvidia.com/jetson/archives/r36.3/DeveloperGuide/SD/CameraDevelopment/Sensor…

[image] norman_xu: System version: Jetpack 5.1.3 (R35.5.1) there’re several camera bug within earlier Jetpack release version. is it possible for moving to the latest JetPack 5.1.4 for verification?

Hi jerry, The customer requested to use this version. Can you help analyze and troubleshoot it?

hello norman_xu, let’s try adding format settings into v4l pipeline for launching camera streams. for instance, please examine your sensor format dumps, $ v4l2-ctl -d /dev/video0 --list-formats-ext after that, please specify the supported format into v4l pipeline for testing. $ v4l2-ctl -d /de…

Hi Jerry, The problem still occurs. [image] [image]

hello norman_xu, it looks weird, is it actually sending MIPI signaling to CSI channel while issue happened? BTW, had you refer to Topic 293597 to apply camera firmware update to improve CSI stability.

Hi Jerry, 1.Yes, it actually sending MIPI signaling. 2.How to flash it on Jetson Orin NX? I flash with the follow command sudo ./flash.sh -r -k A_rce-fw jetson-orin-nano-devkit nvme0n1p1 then got stuck [image]

Hi Jerry， We have verified that there is no such issue on Jetpack 5.1.4 (R35.6.0). Because our product has been tested on Jetpack 5.1.3 (R35.5.0) for a long time and is about to be mass-produced, we do not want to upgrade to Jetpack 5.1.4 (R35.6.0). Can you provide a patch to fix this issue?

Hi Jerry， 1.I failed to flash the camera debug firmware by executing l4t_initrd_flash.sh [1ab1d5893e2fea14cec590742e1faaf] 2.Then I ran a full flash by execute the following command sudo ./apply_binaries.sh sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-device nvme0n1p1 -c tools/ke…

General error queue is out of sync with frame queue

Robotics & Edge Computing Jetson Systems Jetson Orin NX

JerryChang October 15, 2024, 2:09am 10

hello norman_xu,

you should execute with l4t_initrd_flash.sh since you’re working with Orin NX,
please refer to Topic 260583 for demonstration steps to replace the camera debug firmware.

Topic		Replies	Views
[RCE] ERROR: camera-ip/vi5/vi5.c:745 [vi5_handle_eof] "General error queue is out of sync with frame queue Jetson AGX Orin camera	8	1997	September 8, 2022
All cameras stop work suddenly on orin&jetpack 5.1.3 Jetson AGX Orin camera	9	251	March 6, 2025
General error queue is out of sync with frame queue Jetson Orin Nano camera	6	207	November 22, 2024
Jetson ORIN-NX camera capture error Jetson Orin NX camera	8	1141	April 5, 2023
Camera failed with log:VIFALC_TDSTATE on Jetpack5.0.2 Jetson AGX Orin camera	20	5104	October 5, 2022
AGX Orin camera issues Jetson AGX Orin camera , vi	26	1470	July 1, 2024
Camera still crash after adding some patch Jetson AGX Orin camera	9	159	July 18, 2025
Image capture error Jetson AGX Orin camera	12	559	May 7, 2024
Orin crashed because of a camera error Jetson AGX Orin camera	3	1081	October 13, 2023
Kernel panic with camera Jetson AGX Orin camera	13	366	November 25, 2024

General error queue is out of sync with frame queue

Related topics