Hello, I am trying to setup an RTSP stream using gstreamer, except that I can’t get it to work, at all. To begin with, I tried running the command shown here to start a stream. gst-launch-1.0 videotestsrc ! omxh265enc ! rtph265pay name=pay0 pt=96 I used VLC player to check the stream on the loca…

Hi, If you run ./test-launch "videotestsrc ! omxh265enc ! rtph265pay name=pay0 pt=96" The server should up and ready. Somehow in your post you run it through gst-launch-1.0. This is wrong. gst-launch-1.0 videotestsrc ! omxh265enc ! rtph265pay name=pay0 pt=96

Gstreamer RTSP server setup

Autonomous Machines Jetson & Embedded Systems Jetson TX2

DaneLLL April 10, 2020, 7:45am 11

Hi,
The command of using E-Con See3CAM CU135 is

It should work by modifying width, height to fit your USB camera.