Hi, I’m using Jetson AGX xavier development kit. I need to generate a clock using gpio so I configured gpio_250 as a output pin and toggling using gpio_set_value() API. But the delay between the toggling is not uniform. because of this non uniform timing issue I couldn’t get the expected sequence o…

Could you try below. Add isolcpus=1 to extlinux.conf and reboot the system Manually schedule the application to the core: $ taskset 0x1 <USER_APPLICATION> &

Could you boost the CPU as performance to try. sudo nvpmodel -m 0 sudo jetson_clocks sudo su echo 1 > /sys/kernel/debug/bpmp/debug/clk/emc/mrq_rate_locked cat /sys/kernel/debug/bpmp/debug/clk/emc/max_rate | tee /sys/kernel/debug/bpmp/debug/clk/emc/rate

Hi Shane, Thanks for your prompt response. I have tried your suggestion but that inconsistent behavior is exist. Here is the logs and output image. Logs: root@c2v-desktop:/home/c2v/Desktop/sinchana/kmod_test# rmmod user_kmodule.ko root@c2v-desktop:/home/c2v/Desktop/sinchana/kmod_test# sudo nvpmo…

Any suggestion would be helpful for us.

Can anyone help on this? Pls share your suggestions if any.

It could be the ndelay() to smaller for the GPIO sample rate. As the GPIO Max sample rate is 50Khz so I think the min delay is 20ns

Hi Shane, we used udelay() not ndelay(). Our requirement is like each toggle should be with in 2uS(max). But sometimes toggle delay is more than 30uS.

The udelay() is a busy wait loop (kind of sleep) call . There might be some higher priority task taken up by CPU.? Can you please check if any higher priority task is running during this time?

Hi Shane, we haven’t run any tasks from our side apart from this. If it so it should be default system tasks only running behind this. But how we can check which tasks interrupting this. Please suggest a way to find that. And moreover we have tried with kernel timers instead of using delay() APIs …

Inconsistent delay between GPIO toggle

Robotics & Edge Computing Jetson Systems Jetson AGX Xavier

system Closed June 14, 2022, 8:39am 16

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.

Topic		Replies	Views
GPIO Interrupt latency Jetson AGX Xavier gpio	6	1477	January 5, 2022
Xavier NX GPIO Accurate Jetson Xavier NX gpio	2	362	October 11, 2022
Jetson_Nx_GPIO_delay Jetson Xavier NX gpio	3	566	June 29, 2022
GPIO code execution speed increase Jetson Nano gpio	17	2179	June 25, 2021
How to modify GPIO's toggle speed Jetson Orin NX gpio	12	1098	August 4, 2023
nvpmodel 0 will slow down the gpio control speed Jetson TX2	2	433	October 18, 2021
How to synchronize different GPIO pins? Jetson AGX Xavier	6	1011	October 18, 2021
Jetson Nano 2GB dev kit GPIO toggle speed from Python? Jetson Nano gpio	6	1381	October 15, 2021
Delay for /sys/class/gpio/gpioX/direction becoming available to write to Jetson Nano gpio	7	962	October 18, 2021
GPIO Bit-Bang Speed Increase Jetson TX2 nvbugs	24	4221	June 4, 2019

Inconsistent delay between GPIO toggle

Related topics