Jetson AGX Orin PMIC Power Button Supervisor MCU Programming

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Orin
, , ,
1

Jetson Orin Design guide reads:

Designs that intend to follow the NVIDIA carrier board design and include the
EFM8SB10F8G-A-QFN20 MPU for Button Power Button control need to replicate the circuitry on
the latest P3737 carrier board. NVIDIA will provide the binary and the customer should get the
flashing instructions from Silicon Labs.

However it is unclear in which method the MCU should be programmed. Reading through the siliconlabs website, it seems their dev board can be programmed using DEBUGADPTR1-USB programmer with Simplicity IDE. Would this method be feasible with the schematic copied from 3737 reference design without modification?

2

Hi there @j.ryu and welcome to the NVIDIA developer forums.

I moved your post to the Jetson forums, I think the experts there will be better suited to help you.

Thanks!

4

Hi, current P3737 design has left the test points of the pins of C2 interface.

6

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.