As per the title. I would like to update the AGX Orin to the latest version, but would like to keep the old version in the emmc. I would like to load an image into the nVMe drive outside of the ORIN. I could do this on windows, as I have a USB to NVMe adapter - if a prebuilt image is available. I…

There is no update from you for a period, assuming this is not an issue anymore. Hence, we are closing this topic. If need further support, please open a new one. Thanks ~0910 Hi, Wait for your update. Thanks

*** Please note that this reply is generated by LLM automatically *** To update the Jetson AGX Orin to the latest version while keeping the old version on the eMMC, you can follow these steps: Create a bootable NVMe drive: You can use a USB-to-NVMe adapter to connect the NVMe drive to your Window…

Just to make sure I download the right Jetson Linux Image - do you have a link for the right image file for the AGX Orin 64G dev kit. (Ubuntu 24.04 ideally) Thanks

Hi, What is your old version in emmc? And what is your target latest version (JP5.1.5/ JP6.2) Thanks

Yes, that is the case. The latest JetPack 6.2.1 is required for an SDK that uses it (JetPack 6.x versus earlier versions). I thought I would update the Linux version at the same time to 24.04 (from 20.04) - in case the older version is unsupported in the near future.

Hi, Please refer to below official documentation Quick Start — NVIDIA Jetson Linux Developer Guide Prepare a native ubuntu Download the JP6.2 bsp and rootfs Follow the mentioned doc to extract the tar file run the below commands sudo ./tools/kernel_flash/l4…

Thanks - however ()as per the original post), I was hoping to flash the NVMe external to the Jetson (from windows - i.e. I would download the image on an external PC, and then flash the NVMe while it is attached to the PC via an external USB adapter). Once flashed, I would then install it in the Or…

Hi, Do you mean you want to install JP6.2 in NVMe using tool like balenaEtcher? If yes, please refer to similar user experience. [image] Trying to get NVMe flashed on Jetson Orin Nano via VirtualBox Ubuntu 22.04 LTS Jetson Orin Nano Update 1: So I found tha…

Yes - or Rufus. I would have a complete image of the Jetson with all the tools etc, and that would be flashed onto the NVMe drive in a windows environment, and then plugged into the Jetson. I will look at the links provided in the morning to see if that is the case there. Thanks

Load a boot image on an NVMe M.2 drive, and then install into Orin AGX, and boot from it

Robotics & Edge Computing Jetson Systems Jetson AGX Orin

DavidDDD August 27, 2025, 3:15am 10

Hi,

Do you mean you want to install JP6.2 in NVMe using tool like balenaEtcher?

If yes, please refer to similar user experience.

Thanks

Topic		Replies	Views
How can I migrate system from emmc to nvme in my AGX orin Jetson AGX Orin boot , reflash	6	659	November 29, 2024
How to change the default booting from eMMC to NVMe without using the SDK Manager Jetson AGX Orin boot	5	1730	December 5, 2023
Flashing AGX Orin Jetson AGX Orin reflash	3	132	May 19, 2026
Cannot Jetson Orin boot from M.2 SSD. ERROR: Error initializing runtime service trusty_fast Jetson AGX Orin boot	11	1045	July 12, 2023
Flashing Issues with AGX Orin onto NVME Jetson AGX Orin reflash	11	2074	August 10, 2023
Orin 5.1.3 eMMC fails to boot into 5.1.1 NVMe Jetson AGX Orin boot , board-design , nvme	5	224	February 5, 2025
NVME bootable for Jetson Orin 32GB Jetson AGX Orin sdkm , nvme	1	858	December 18, 2022
JETSON AGX ORIN flash issue in shell ( not sdkmanager ) Jetson AGX Orin boot , reflash , ubuntu	5	814	November 15, 2023
Trouble Emulating an NVIDIA Jetson Orin NX Using the NVIDIA Jetson AGX Orin Developer Kit Jetson AGX Orin reflash , nvme	6	696	May 6, 2024
[ORIN AGX][OTA] Using nvme on Orin Jetson AGX Orin ota	3	737	January 17, 2024

Load a boot image on an NVMe M.2 drive, and then install into Orin AGX, and boot from it

Related topics